Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit e1e146b1 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski
Browse files

ARM: dts: exynos: Add RTC and I2C to Exynos5410 



Configure Exynos5410-specific properties of RTC, I2C and HSI2C nodes.
This still does not enable them on the board level though.

Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
parent b5f5654f

arch/arm/boot/dts/exynos5410.dtsi

+63 −0
Original line number Diff line number Diff line
@@ -149,6 +149,62 @@ 
	};

};



&i2c_0 {

	clocks = <&clock CLK_I2C0>;

	clock-names = "i2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_bus>;

};



&i2c_1 {

	clocks = <&clock CLK_I2C1>;

	clock-names = "i2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_bus>;

};



&i2c_2 {

	clocks = <&clock CLK_I2C2>;

	clock-names = "i2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_bus>;

};



&i2c_3 {

	clocks = <&clock CLK_I2C3>;

	clock-names = "i2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c3_bus>;

};



&hsi2c_4 {

	clocks = <&clock CLK_USI0>;

	clock-names = "hsi2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c4_hs_bus>;

};



&hsi2c_5 {

	clocks = <&clock CLK_USI1>;

	clock-names = "hsi2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c5_hs_bus>;

};



&hsi2c_6 {

	clocks = <&clock CLK_USI2>;

	clock-names = "hsi2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c6_hs_bus>;

};



&hsi2c_7 {

	clocks = <&clock CLK_USI3>;

	clock-names = "hsi2c";

	pinctrl-names = "default";

	pinctrl-0 = <&i2c7_hs_bus>;

};



&mct {

	clocks = <&fin_pll>, <&clock CLK_MCT>;

	clock-names = "fin_pll", "mct";
@@ -159,6 +215,13 @@ 
	clock-names = "timers";

};



&rtc {

	clocks = <&clock CLK_RTC>;

	clock-names = "rtc";

	interrupt-parent = <&pmu_system_controller>;

	status = "disabled";

};



&serial_0 {

	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;

	clock-names = "uart", "clk_uart_baud0";