Merge master.kernel.org:/home/rmk/linux-2.6-mmc (e004876c) · Commits · e / devices / android_kernel_teracube_emerald

drivers/mmc/imxmmc.c

+35 −34

Original line number	Diff line number	Diff line
		@@ -91,6 +91,8 @@ struct imxmci_host {
		int dma_allocated;

		unsigned char actual_bus_width;

		int prev_cmd_code;
		};

		#define IMXMCI_PEND_IRQ_b 0
		@@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host host, struct mmc_data data)
		* partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
		* This is required for SCR read at least.
		*/
		if (datasz < 64) {
		if (datasz < 512) {
		host->dma_size = datasz;
		if (data->flags & MMC_DATA_READ) {
		host->dma_dir = DMA_FROM_DEVICE;

		/* Hack to enable read SCR */
		if(datasz < 16) {
		MMC_NOB = 1;
		MMC_BLK_LEN = 16;
		}
		MMC_BLK_LEN = 512;
		} else {
		host->dma_dir = DMA_TO_DEVICE;
		}
		@@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host host, struct mmc_request

		spin_unlock_irqrestore(&host->lock, flags);

		if(req && req->cmd)
		host->prev_cmd_code = req->cmd->opcode;

		host->req = NULL;
		host->cmd = NULL;
		host->data = NULL;
		@@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host host, unsigned int pstat)
		{
		int i;
		int burst_len;
		int flush_len;
		int trans_done = 0;
		unsigned int stat = *pstat;

		@@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host host, unsigned int pstat)
		dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
		stat);

		udelay(20); /* required for clocks < 8MHz*/

		if(host->dma_dir == DMA_FROM_DEVICE) {
		imxmci_busy_wait_for_status(host, &stat,
		STATUS_APPL_BUFF_FF \| STATUS_DATA_TRANS_DONE,
		20, "imxmci_cpu_driven_data read");
		50, "imxmci_cpu_driven_data read");

		while((stat & (STATUS_APPL_BUFF_FF \| STATUS_DATA_TRANS_DONE)) &&
		(host->data_cnt < host->dma_size)) {
		if(burst_len >= host->dma_size - host->data_cnt) {
		flush_len = burst_len;
		burst_len = host->dma_size - host->data_cnt;
		flush_len -= burst_len;
		host->data_cnt = host->dma_size;
		trans_done = 1;
		} else {
		flush_len = 0;
		host->data_cnt += burst_len;
		}
		(host->data_cnt < 512)) {

		for(i = burst_len; i>=2 ; i-=2) {
		*(host->data_ptr++) = MMC_BUFFER_ACCESS;
		udelay(20); /* required for clocks < 8MHz*/
		}

		if(i == 1)
		(u8)(host->data_ptr) = MMC_BUFFER_ACCESS;
		for(i = burst_len; i>=2 ; i-=2) {
		u16 data;
		data = MMC_BUFFER_ACCESS;
		udelay(10); /* required for clocks < 8MHz*/
		if(host->data_cnt+2 <= host->dma_size) {
		*(host->data_ptr++) = data;
		} else {
		if(host->data_cnt < host->dma_size)
		(u8)(host->data_ptr) = data;
		}
		host->data_cnt += 2;
		}

		stat = MMC_STATUS;

		/* Flush extra bytes from FIFO */
		while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
		i = MMC_BUFFER_ACCESS;
		stat = MMC_STATUS;
		stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
		dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
		host->data_cnt, burst_len, stat);
		}

		dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n",
		burst_len, stat);
		}
		if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
		trans_done = 1;

		if(host->dma_size & 0x1ff)
		stat &= ~STATUS_CRC_READ_ERR;

		} else {
		imxmci_busy_wait_for_status(host, &stat,
		STATUS_APPL_BUFF_FE,
		@@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data)
		what, stat, MMC_INT_MASK);
		dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
		MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
		dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n",
		host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size);
		dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
		host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size);
		}

		if(!host->present \|\| timeout)

drivers/mmc/mmc.c

+51 −4

Original line number	Diff line number	Diff line
		@@ -247,6 +247,55 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,

		EXPORT_SYMBOL(mmc_wait_for_app_cmd);

		/**
		* mmc_set_data_timeout - set the timeout for a data command
		* @data: data phase for command
		* @card: the MMC card associated with the data transfer
		* @write: flag to differentiate reads from writes
		*/
		void mmc_set_data_timeout(struct mmc_data data, const struct mmc_card card,
		int write)
		{
		unsigned int mult;

		/*
		* SD cards use a 100 multiplier rather than 10
		*/
		mult = mmc_card_sd(card) ? 100 : 10;

		/*
		* Scale up the multiplier (and therefore the timeout) by
		* the r2w factor for writes.
		*/
		if (write)
		mult <<= card->csd.r2w_factor;

		data->timeout_ns = card->csd.tacc_ns * mult;
		data->timeout_clks = card->csd.tacc_clks * mult;

		/*
		* SD cards also have an upper limit on the timeout.
		*/
		if (mmc_card_sd(card)) {
		unsigned int timeout_us, limit_us;

		timeout_us = data->timeout_ns / 1000;
		timeout_us += data->timeout_clks * 1000 /
		(card->host->ios.clock / 1000);

		if (write)
		limit_us = 250000;
		else
		limit_us = 100000;

		if (timeout_us > limit_us) {
		data->timeout_ns = limit_us * 1000;
		data->timeout_clks = 0;
		}
		}
		}
		EXPORT_SYMBOL(mmc_set_data_timeout);

		static int mmc_select_card(struct mmc_host host, struct mmc_card card);

		/**
		@@ -908,11 +957,9 @@ static void mmc_read_scrs(struct mmc_host *host)
		{
		int err;
		struct mmc_card *card;

		struct mmc_request mrq;
		struct mmc_command cmd;
		struct mmc_data data;

		struct scatterlist sg;

		list_for_each_entry(card, &host->cards, node) {
		@@ -947,8 +994,8 @@ static void mmc_read_scrs(struct mmc_host *host)

		memset(&data, 0, sizeof(struct mmc_data));

		data.timeout_ns = card->csd.tacc_ns * 10;
		data.timeout_clks = card->csd.tacc_clks * 10;
		mmc_set_data_timeout(&data, card, 0);

		data.blksz_bits = 3;
		data.blksz = 1 << 3;
		data.blocks = 1;

drivers/mmc/mmc_block.c

+7 −53

Original line number	Diff line number	Diff line
		@@ -30,6 +30,7 @@
		#include <linux/mutex.h>

		#include <linux/mmc/card.h>
		#include <linux/mmc/host.h>
		#include <linux/mmc/protocol.h>

		#include <asm/system.h>
		@@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue mq, struct request req)

		brq.cmd.arg = req->sector << 9;
		brq.cmd.flags = MMC_RSP_R1 \| MMC_CMD_ADTC;
		brq.data.timeout_ns = card->csd.tacc_ns * 10;
		brq.data.timeout_clks = card->csd.tacc_clks * 10;
		brq.data.blksz_bits = md->block_bits;
		brq.data.blksz = 1 << md->block_bits;
		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
		@@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue mq, struct request req)
		brq.stop.arg = 0;
		brq.stop.flags = MMC_RSP_R1B \| MMC_CMD_AC;

		mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);

		if (rq_data_dir(req) == READ) {
		brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
		brq.data.flags \|= MMC_DATA_READ;
		@@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue mq, struct request req)
		brq.cmd.opcode = MMC_WRITE_BLOCK;
		brq.data.flags \|= MMC_DATA_WRITE;
		brq.data.blocks = 1;

		/*
		* Scale up the timeout by the r2w factor
		*/
		brq.data.timeout_ns <<= card->csd.r2w_factor;
		brq.data.timeout_clks <<= card->csd.r2w_factor;
		}

		if (brq.data.blocks > 1) {
		@@ -324,52 +319,11 @@ static struct mmc_blk_data mmc_blk_alloc(struct mmc_card card)
		md->read_only = mmc_blk_readonly(card);

		/*
		* Figure out a workable block size. MMC cards have:
		* - two block sizes, one for read and one for write.
		* - may support partial reads and/or writes
		* (allows block sizes smaller than specified)
		*/
		md->block_bits = card->csd.read_blkbits;
		if (card->csd.write_blkbits != card->csd.read_blkbits) {
		if (card->csd.write_blkbits < card->csd.read_blkbits &&
		card->csd.read_partial) {
		/*
		* write block size is smaller than read block
		* size, but we support partial reads, so choose
		* the smaller write block size.
		*/
		md->block_bits = card->csd.write_blkbits;
		} else if (card->csd.write_blkbits > card->csd.read_blkbits &&
		card->csd.write_partial) {
		/*
		* read block size is smaller than write block
		* size, but we support partial writes. Use read
		* block size.
		*/
		} else {
		/*
		* We don't support this configuration for writes.
		*/
		printk(KERN_ERR "%s: unable to select block size for "
		"writing (rb%u wb%u rp%u wp%u)\n",
		mmc_card_id(card),
		1 << card->csd.read_blkbits,
		1 << card->csd.write_blkbits,
		card->csd.read_partial,
		card->csd.write_partial);
		md->read_only = 1;
		}
		}

		/*
		* Refuse to allow block sizes smaller than 512 bytes.
		* Both SD and MMC specifications state (although a bit
		* unclearly in the MMC case) that a block size of 512
		* bytes must always be supported by the card.
		*/
		if (md->block_bits < 9) {
		printk(KERN_ERR "%s: unable to support block size %u\n",
		mmc_card_id(card), 1 << md->block_bits);
		ret = -EINVAL;
		goto err_kfree;
		}
		md->block_bits = 9;

		md->disk = alloc_disk(1 << MMC_SHIFT);
		if (md->disk == NULL) {

include/linux/mmc/host.h

+1 −1

Original line number	Diff line number	Diff line
		@@ -77,7 +77,7 @@ struct mmc_host {
		struct device *dev;
		struct class_device class_dev;
		int index;
		struct mmc_host_ops *ops;
		const struct mmc_host_ops *ops;
		unsigned int f_min;
		unsigned int f_max;
		u32 ocr_avail;

include/linux/mmc/mmc.h

+2 −0

Original line number	Diff line number	Diff line
		@@ -105,6 +105,8 @@ extern int mmc_wait_for_cmd(struct mmc_host , struct mmc_command , int);
		extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int,
		struct mmc_command *, int);

		extern void mmc_set_data_timeout(struct mmc_data , const struct mmc_card , int);

		extern int __mmc_claim_host(struct mmc_host host, struct mmc_card card);

		static inline void mmc_claim_host(struct mmc_host *host)