[ARM] Kirkwood: Marvell GuruPlug support (d8f089d2) · Commits · e / devices / android_kernel_teracube_emerald

arch/arm/mach-kirkwood/Kconfig

+6 −0

Original line number	Original line	Diff line number	Diff line
	@@ -38,6 +38,12 @@ config MACH_ESATA_SHEEVAPLUG
	Say 'Y' here if you want your kernel to support the		Say 'Y' here if you want your kernel to support the
	Marvell eSATA SheevaPlug Reference Board.		Marvell eSATA SheevaPlug Reference Board.

			config MACH_GURUPLUG
			bool "Marvell GuruPlug Reference Board"
			help
			Say 'Y' here if you want your kernel to support the
			Marvell GuruPlug Reference Board.

	config MACH_TS219		config MACH_TS219
	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"		bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
	help		help

arch/arm/mach-kirkwood/Makefile

+1 −0

Original line number	Original line	Diff line number	Diff line
	@@ -6,6 +6,7 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
	obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o		obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
	obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o		obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
	obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o		obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
			obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
	obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o		obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
	obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o		obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
	obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o		obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o

arch/arm/mach-kirkwood/guruplug-setup.c

0 → 100644

+131 −0

Original line number	Original line	Diff line number	Diff line
			/*
			* arch/arm/mach-kirkwood/guruplug-setup.c
			*
			* Marvell GuruPlug Reference Board Setup
			*
			* This file is licensed under the terms of the GNU General Public
			* License version 2. This program is licensed "as is" without any
			* warranty of any kind, whether express or implied.
			*/

			#include <linux/kernel.h>
			#include <linux/init.h>
			#include <linux/platform_device.h>
			#include <linux/mtd/partitions.h>
			#include <linux/ata_platform.h>
			#include <linux/mv643xx_eth.h>
			#include <linux/gpio.h>
			#include <linux/leds.h>
			#include <asm/mach-types.h>
			#include <asm/mach/arch.h>
			#include <mach/kirkwood.h>
			#include <plat/mvsdio.h>
			#include "common.h"
			#include "mpp.h"

			static struct mtd_partition guruplug_nand_parts[] = {
			{
			.name = "u-boot",
			.offset = 0,
			.size = SZ_1M
			}, {
			.name = "uImage",
			.offset = MTDPART_OFS_NXTBLK,
			.size = SZ_4M
			}, {
			.name = "root",
			.offset = MTDPART_OFS_NXTBLK,
			.size = MTDPART_SIZ_FULL
			},
			};

			static struct mv643xx_eth_platform_data guruplug_ge00_data = {
			.phy_addr = MV643XX_ETH_PHY_ADDR(0),
			};

			static struct mv643xx_eth_platform_data guruplug_ge01_data = {
			.phy_addr = MV643XX_ETH_PHY_ADDR(1),
			};

			static struct mv_sata_platform_data guruplug_sata_data = {
			.n_ports = 1,
			};

			static struct mvsdio_platform_data guruplug_mvsdio_data = {
			/* unfortunately the CD signal has not been connected */
			};

			static struct gpio_led guruplug_led_pins[] = {
			{
			.name = "guruplug:red:health",
			.gpio = 46,
			.active_low = 1,
			},
			{
			.name = "guruplug:green:health",
			.gpio = 47,
			.active_low = 1,
			},
			{
			.name = "guruplug:red:wmode",
			.gpio = 48,
			.active_low = 1,
			},
			{
			.name = "guruplug:green:wmode",
			.gpio = 49,
			.active_low = 1,
			},
			};

			static struct gpio_led_platform_data guruplug_led_data = {
			.leds = guruplug_led_pins,
			.num_leds = ARRAY_SIZE(guruplug_led_pins),
			};

			static struct platform_device guruplug_leds = {
			.name = "leds-gpio",
			.id = -1,
			.dev = {
			.platform_data = &guruplug_led_data,
			}
			};

			static unsigned int guruplug_mpp_config[] __initdata = {
			MPP46_GPIO, /* M_RLED */
			MPP47_GPIO, /* M_GLED */
			MPP48_GPIO, /* B_RLED */
			MPP49_GPIO, /* B_GLED */
			0
			};

			static void __init guruplug_init(void)
			{
			/*
			* Basic setup. Needs to be called early.
			*/
			kirkwood_init();
			kirkwood_mpp_conf(guruplug_mpp_config);

			kirkwood_uart0_init();
			kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);

			kirkwood_ehci_init();
			kirkwood_ge00_init(&guruplug_ge00_data);
			kirkwood_ge01_init(&guruplug_ge01_data);
			kirkwood_sata_init(&guruplug_sata_data);
			kirkwood_sdio_init(&guruplug_mvsdio_data);

			platform_device_register(&guruplug_leds);
			}

			MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
			/* Maintainer: Siddarth Gore <gores@marvell.com> */
			.phys_io = KIRKWOOD_REGS_PHYS_BASE,
			.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
			.boot_params = 0x00000100,
			.init_machine = guruplug_init,
			.map_io = kirkwood_map_io,
			.init_irq = kirkwood_init_irq,
			.timer = &kirkwood_timer,
			MACHINE_END