Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d7a26beb authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

Merge tag 'extcon-next-for-4.5' of... 

Merge tag 'extcon-next-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 4.5

Detailed description for patchset:
1. Add new MAX3355 extcon driver
- Maxim Integrated MAX3355E chip integrates a charge pump
  and comparator to enable a system with an integrated
  USB OTG dual-role transceiver to function as an USB OTG
  dual-role device.

2. Update the extcon-arizona driver for jack detection
- Add the device binding for the jack detection and add
  the documentation of extcon-arizona.c.

3. Fix the minor issue of extcon driver
- Add IRQF_ONESHOT to interrupt flags of extcon-rt8973.
- Fix the return value regmap_irq_get_virq() of
  extcon-max(14577|77693|77843).c driver by using script[1].
  [1] http://permalink.gmane.org/gmane.linux.kernel/2046107
parents b9884d3b 08a0a4f9

Documentation/devicetree/bindings/extcon/extcon-arizona.txt

+60 −0
Original line number Diff line number Diff line
@@ -13,3 +13,63 @@ Optional properties: 
    ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR

    If this node is not mentioned or if the value is unknown, then

    headphone detection mode is set to HPDETL.



  - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack

    detection.

  - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for

    jack detection.

  - wlf,jd-invert : Invert the polarity of the jack detection switch



  - wlf,micd-software-compare : Use a software comparison to determine mic

    presence

  - wlf,micd-detect-debounce : Additional software microphone detection

    debounce specified in milliseconds.

  - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset

    polarity if one exists.

  - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to

    performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX

    defines.

  - wlf,micd-rate : Delay between successive microphone detection measurements,

    specified as per the ARIZONA_MICD_TIME_XXX defines.

  - wlf,micd-dbtime : Microphone detection hardware debounces specified as the

    number of measurements to take, valid values being 2 and 4.

  - wlf,micd-timeout-ms : Timeout for microphone detection, specified in

    milliseconds.

  - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone

    detection.

  - wlf,micd-configs : Headset polarity configurations (generally used for

    detection of CTIA / OMTP headsets), the field can be of variable length

    but should always be a multiple of 3 cells long, each three cell group

    represents one polarity configuration.

    The first cell defines the accessory detection pin, zero will use MICDET1

    and all other values will use MICDET2.

    The second cell represents the MICBIAS to be used.

    The third cell represents the value of the micd-pol-gpio pin.



  - wlf,gpsw : Settings for the general purpose switch



Example:



codec: wm8280@0 {

	compatible = "wlf,wm8280";

	reg = <0>;

	...



	wlf,use-jd2;

	wlf,use-jd2-nopull;

	wlf,jd-invert;



	wlf,micd-software-compare;

	wlf,micd-detect-debounce = <0>;

	wlf,micd-pol-gpio = <&codec 2 0>;

	wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;

	wlf,micd-dbtime = <4>;

	wlf,micd-timeout-ms = <100>;

	wlf,micd-force-micbias;

	wlf,micd-configs = <

		0 1 0 /* MICDET1 MICBIAS1 GPIO=low */

		1 2 1 /* MICDET2 MICBIAS2 GPIO=high */

	>;



	wlf,gpsw = <0>;

};

Documentation/devicetree/bindings/extcon/extcon-max3355.txt

0 → 100644
+21 −0
Original line number Diff line number Diff line 
Maxim Integrated MAX3355 USB OTG chip

-------------------------------------



MAX3355 integrates a charge pump and comparators to enable a system with an

integrated USB OTG dual-role transceiver to function as a USB OTG dual-role

device.



Required properties:

- compatible: should be "maxim,max3355";

- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin

		    connected to the MAX3355's SHDN# pin;

- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin

	    connected to the MAX3355's ID_OUT pin.



Example:



	usb-otg {

		compatible = "maxim,max3355";

		maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;

		id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;

	};

drivers/extcon/Kconfig

+9 −0
Original line number Diff line number Diff line
@@ -52,6 +52,15 @@ config EXTCON_MAX14577 
	  Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory

	  detector and switch.



config EXTCON_MAX3355

	tristate "Maxim MAX3355 USB OTG EXTCON Support"

	depends on GPIOLIB || COMPILE_TEST

	help

	  If you say yes here you get support for the USB OTG role detection by

	  MAX3355. The MAX3355 chip integrates a charge pump and comparators to

	  enable a system with an integrated USB OTG dual-role transceiver to

	  function as an USB OTG dual-role device.



config EXTCON_MAX77693

	tristate "Maxim MAX77693 EXTCON Support"

	depends on MFD_MAX77693 && INPUT

drivers/extcon/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -8,6 +8,7 @@ obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o 
obj-$(CONFIG_EXTCON_AXP288)	+= extcon-axp288.o

obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o

obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o

obj-$(CONFIG_EXTCON_MAX3355)	+= extcon-max3355.o

obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o

obj-$(CONFIG_EXTCON_MAX77843)	+= extcon-max77843.o

obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o

drivers/extcon/extcon-arizona.c

+68 −3
Original line number Diff line number Diff line
@@ -1201,10 +1201,58 @@ static void arizona_micd_set_level(struct arizona *arizona, int index, 
	regmap_update_bits(arizona->regmap, reg, mask, level);

}



static int arizona_extcon_device_get_pdata(struct arizona *arizona)

static int arizona_extcon_get_micd_configs(struct device *dev,

					   struct arizona *arizona)

{

	const char * const prop = "wlf,micd-configs";

	const int entries_per_config = 3;

	struct arizona_micd_config *micd_configs;

	int nconfs, ret;

	int i, j;

	u32 *vals;



	nconfs = device_property_read_u32_array(arizona->dev, prop, NULL, 0);

	if (nconfs <= 0)

		return 0;



	vals = kcalloc(nconfs, sizeof(u32), GFP_KERNEL);

	if (!vals)

		return -ENOMEM;



	ret = device_property_read_u32_array(arizona->dev, prop, vals, nconfs);

	if (ret < 0)

		goto out;



	nconfs /= entries_per_config;



	micd_configs = devm_kzalloc(dev,

				    nconfs * sizeof(struct arizona_micd_range),

				    GFP_KERNEL);

	if (!micd_configs) {

		ret = -ENOMEM;

		goto out;

	}



	for (i = 0, j = 0; i < nconfs; ++i) {

		micd_configs[i].src = vals[j++] ? ARIZONA_ACCDET_SRC : 0;

		micd_configs[i].bias = vals[j++];

		micd_configs[i].gpio = vals[j++];

	}



	arizona->pdata.micd_configs = micd_configs;

	arizona->pdata.num_micd_configs = nconfs;



out:

	kfree(vals);

	return ret;

}



static int arizona_extcon_device_get_pdata(struct device *dev,

					   struct arizona *arizona)

{

	struct arizona_pdata *pdata = &arizona->pdata;

	unsigned int val = ARIZONA_ACCDET_MODE_HPL;

	int ret;



	device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val);

	switch (val) {
@@ -1230,12 +1278,29 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) 
	device_property_read_u32(arizona->dev, "wlf,micd-dbtime",

				 &pdata->micd_dbtime);



	device_property_read_u32(arizona->dev, "wlf,micd-timeout",

	device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms",

				 &pdata->micd_timeout);



	pdata->micd_force_micbias = device_property_read_bool(arizona->dev,

						"wlf,micd-force-micbias");



	pdata->micd_software_compare = device_property_read_bool(arizona->dev,

						"wlf,micd-software-compare");



	pdata->jd_invert = device_property_read_bool(arizona->dev,

						     "wlf,jd-invert");



	device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw);



	pdata->jd_gpio5 = device_property_read_bool(arizona->dev,

						    "wlf,use-jd2");

	pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev,

						"wlf,use-jd2-nopull");



	ret = arizona_extcon_get_micd_configs(dev, arizona);

	if (ret < 0)

		dev_err(arizona->dev, "Failed to read micd configs: %d\n", ret);



	return 0;

}
@@ -1257,7 +1322,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) 
		return -ENOMEM;



	if (!dev_get_platdata(arizona->dev))

		arizona_extcon_device_get_pdata(arizona);

		arizona_extcon_device_get_pdata(&pdev->dev, arizona);



	info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");

	if (IS_ERR(info->micvdd)) {