cyclom: Update to current logging forms (d6810e13) · Commits · e / devices / android_kernel_teracube_emerald

drivers/net/wan/cycx_drv.c

+37 −44

Original line number	Diff line number	Diff line
		@@ -48,6 +48,8 @@
		* Aug 8, 1998 acme Initial version.
		*/

		#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

		#include <linux/init.h> /* __init */
		#include <linux/module.h>
		#include <linux/kernel.h> /* printk(), and other useful stuff */
		@@ -81,10 +83,9 @@ static u16 checksum(u8 *buf, u32 len);
		/* Global Data */

		/* private data */
		static const char modname[] = "cycx_drv";
		static const char fullname[] = "Cyclom 2X Support Module";
		static const char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo "
		"<acme@conectiva.com.br>";
		static const char copyright[] =
		"(c) 1998-2003 Arnaldo Carvalho de Melo <acme@conectiva.com.br>";

		/* Hardware configuration options.
		* These are arrays of configuration options used by verification routines.
		@@ -110,8 +111,8 @@ static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 };

		static int __init cycx_drv_init(void)
		{
		printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE,
		copyright);
		pr_info("%s v%u.%u %s\n",
		fullname, MOD_VERSION, MOD_RELEASE, copyright);

		return 0;
		}
		@@ -139,18 +140,16 @@ int cycx_setup(struct cycx_hw hw, void cfm, u32 len, unsigned long dpmbase)

		/* Verify IRQ configuration options */
		if (!get_option_index(cycx_2x_irq_options, hw->irq)) {
		printk(KERN_ERR "%s: IRQ %d is invalid!\n", modname, hw->irq);
		pr_err("IRQ %d is invalid!\n", hw->irq);
		return -EINVAL;
		}

		/* Setup adapter dual-port memory window and test memory */
		if (!dpmbase) {
		printk(KERN_ERR "%s: you must specify the dpm address!\n",
		modname);
		pr_err("you must specify the dpm address!\n");
		return -EINVAL;
		} else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) {
		printk(KERN_ERR "%s: memory address 0x%lX is invalid!\n",
		modname, dpmbase);
		pr_err("memory address 0x%lX is invalid!\n", dpmbase);
		return -EINVAL;
		}

		@@ -158,13 +157,12 @@ int cycx_setup(struct cycx_hw hw, void cfm, u32 len, unsigned long dpmbase)
		hw->dpmsize = CYCX_WINDOWSIZE;

		if (!detect_cyc2x(hw->dpmbase)) {
		printk(KERN_ERR "%s: adapter Cyclom 2X not found at "
		"address 0x%lX!\n", modname, dpmbase);
		pr_err("adapter Cyclom 2X not found at address 0x%lX!\n",
		dpmbase);
		return -EINVAL;
		}

		printk(KERN_INFO "%s: found Cyclom 2X card at address 0x%lX.\n",
		modname, dpmbase);
		pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase);

		/* Load firmware. If loader fails then shut down adapter */
		err = load_cyc2x(hw, cfm, len);
		@@ -339,7 +337,7 @@ static int cycx_data_boot(void __iomem addr, u8 code, u32 len)
		for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
		if (buffer_load(addr, code + i,
		min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) {
		printk(KERN_ERR "%s: Error !!\n", modname);
		pr_err("Error !!\n");
		return -1;
		}

		@@ -370,7 +368,7 @@ static int cycx_code_boot(void __iomem addr, u8 code, u32 len)
		for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
		if (buffer_load(addr, code + i,
		min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) {
		printk(KERN_ERR "%s: Error !!\n", modname);
		pr_err("Error !!\n");
		return -1;
		}

		@@ -391,23 +389,20 @@ static int load_cyc2x(struct cycx_hw hw, struct cycx_firmware cfm, u32 len)
		u16 cksum;

		/* Announce */
		printk(KERN_INFO "%s: firmware signature=\"%s\"\n", modname,
		cfm->signature);
		pr_info("firmware signature=\"%s\"\n", cfm->signature);

		/* Verify firmware signature */
		if (strcmp(cfm->signature, CFM_SIGNATURE)) {
		printk(KERN_ERR "%s:load_cyc2x: not Cyclom-2X firmware!\n",
		modname);
		pr_err("load_cyc2x: not Cyclom-2X firmware!\n");
		return -EINVAL;
		}

		printk(KERN_INFO "%s: firmware version=%u\n", modname, cfm->version);
		pr_info("firmware version=%u\n", cfm->version);

		/* Verify firmware module format version */
		if (cfm->version != CFM_VERSION) {
		printk(KERN_ERR "%s:%s: firmware format %u rejected! "
		"Expecting %u.\n",
		modname, __func__, cfm->version, CFM_VERSION);
		pr_err("%s: firmware format %u rejected! Expecting %u.\n",
		__func__, cfm->version, CFM_VERSION);
		return -EINVAL;
		}

		@@ -419,12 +414,11 @@ static int load_cyc2x(struct cycx_hw hw, struct cycx_firmware cfm, u32 len)
		if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) \|\|
		*/
		if (cksum != cfm->checksum) {
		printk(KERN_ERR "%s:%s: firmware corrupted!\n",
		modname, __func__);
		printk(KERN_ERR " cdsize = 0x%x (expected 0x%lx)\n",
		pr_err("%s: firmware corrupted!\n", __func__);
		pr_err(" cdsize = 0x%x (expected 0x%lx)\n",
		len - (int)sizeof(struct cycx_firmware) - 1,
		cfm->info.codesize);
		printk(KERN_ERR " chksum = 0x%x (expected 0x%x)\n",
		pr_err(" chksum = 0x%x (expected 0x%x)\n",
		cksum, cfm->checksum);
		return -EINVAL;
		}
		@@ -432,10 +426,10 @@ static int load_cyc2x(struct cycx_hw hw, struct cycx_firmware cfm, u32 len)
		/* If everything is ok, set reset, data and code pointers */
		img_hdr = (struct cycx_fw_header *)&cfm->image;
		#ifdef FIRMWARE_DEBUG
		printk(KERN_INFO "%s:%s: image sizes\n", __func__, modname);
		printk(KERN_INFO " reset=%lu\n", img_hdr->reset_size);
		printk(KERN_INFO " data=%lu\n", img_hdr->data_size);
		printk(KERN_INFO " code=%lu\n", img_hdr->code_size);
		pr_info("%s: image sizes\n", __func__);
		pr_info(" reset=%lu\n", img_hdr->reset_size);
		pr_info(" data=%lu\n", img_hdr->data_size);
		pr_info(" code=%lu\n", img_hdr->code_size);
		#endif
		reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header);
		data_image = reset_image + img_hdr->reset_size;
		@@ -443,15 +437,14 @@ static int load_cyc2x(struct cycx_hw hw, struct cycx_firmware cfm, u32 len)

		/---- Start load ----/
		/* Announce */
		printk(KERN_INFO "%s: loading firmware %s (ID=%u)...\n", modname,
		pr_info("loading firmware %s (ID=%u)...\n",
		cfm->descr[0] ? cfm->descr : "unknown firmware",
		cfm->info.codeid);

		for (i = 0 ; i < 5 ; i++) {
		/* Reset Cyclom hardware */
		if (!reset_cyc2x(hw->dpmbase)) {
		printk(KERN_ERR "%s: dpm problem or board not found\n",
		modname);
		pr_err("dpm problem or board not found\n");
		return -EINVAL;
		}

		@@ -468,19 +461,19 @@ static int load_cyc2x(struct cycx_hw hw, struct cycx_firmware cfm, u32 len)
		msleep_interruptible(1 * 1000);
		}

		printk(KERN_ERR "%s: reset not started.\n", modname);
		pr_err("reset not started\n");
		return -EINVAL;

		reset_loaded:
		/* Load data.bin */
		if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) {
		printk(KERN_ERR "%s: cannot load data file.\n", modname);
		pr_err("cannot load data file\n");
		return -EINVAL;
		}

		/* Load code.bin */
		if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) {
		printk(KERN_ERR "%s: cannot load code file.\n", modname);
		pr_err("cannot load code file\n");
		return -EINVAL;
		}

		@@ -493,7 +486,7 @@ static int load_cyc2x(struct cycx_hw hw, struct cycx_firmware cfm, u32 len)
		/* Arthur Ganzert's tip: wait a while after the firmware loading...
		seg abr 26 17:17:12 EST 1999 - acme */
		msleep_interruptible(7 * 1000);
		printk(KERN_INFO "%s: firmware loaded!\n", modname);
		pr_info("firmware loaded!\n");

		/* enable interrupts */
		cycx_inten(hw);

drivers/net/wan/cycx_main.c

+14 −17

Original line number	Diff line number	Diff line
		@@ -40,6 +40,8 @@
		* 1998/08/08 acme Initial version.
		*/

		#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

		#include <linux/stddef.h> /* offsetof(), etc. */
		#include <linux/errno.h> /* return codes */
		#include <linux/string.h> /* inline memset(), etc. */
		@@ -107,7 +109,7 @@ static int __init cycx_init(void)
		{
		int cnt, err = -ENOMEM;

		printk(KERN_INFO "%s v%u.%u %s\n",
		pr_info("%s v%u.%u %s\n",
		cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE,
		cycx_copyright);

		@@ -133,9 +135,8 @@ static int __init cycx_init(void)
		err = register_wan_device(wandev);

		if (err) {
		printk(KERN_ERR "%s: %s registration failed with "
		"error %d!\n",
		cycx_drvname, card->devname, err);
		pr_err("%s registration failed with error %d!\n",
		card->devname, err);
		break;
		}
		}
		@@ -198,14 +199,13 @@ static int cycx_wan_setup(struct wan_device wandev, wandev_conf_t conf)

		rc = -EINVAL;
		if (!conf->data_size \|\| !conf->data) {
		printk(KERN_ERR "%s: firmware not found in configuration "
		"data!\n", wandev->name);
		pr_err("%s: firmware not found in configuration data!\n",
		wandev->name);
		goto out;
		}

		if (conf->irq <= 0) {
		printk(KERN_ERR "%s: can't configure without IRQ!\n",
		wandev->name);
		pr_err("%s: can't configure without IRQ!\n", wandev->name);
		goto out;
		}

		@@ -213,8 +213,7 @@ static int cycx_wan_setup(struct wan_device wandev, wandev_conf_t conf)
		irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */

		if (request_irq(irq, cycx_isr, 0, wandev->name, card)) {
		printk(KERN_ERR "%s: can't reserve IRQ %d!\n",
		wandev->name, irq);
		pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq);
		goto out;
		}

		@@ -246,8 +245,7 @@ static int cycx_wan_setup(struct wan_device wandev, wandev_conf_t conf)
		break;
		#endif
		default:
		printk(KERN_ERR "%s: this firmware is not supported!\n",
		wandev->name);
		pr_err("%s: this firmware is not supported!\n", wandev->name);
		rc = -EINVAL;
		}

		@@ -288,8 +286,7 @@ static int cycx_wan_shutdown(struct wan_device *wandev)
		card = wandev->private;
		wandev->state = WAN_UNCONFIGURED;
		cycx_down(&card->hw);
		printk(KERN_INFO "%s: irq %d being freed!\n", wandev->name,
		wandev->irq);
		pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq);
		free_irq(wandev->irq, card);
		out: return ret;
		}
		@@ -308,7 +305,7 @@ static irqreturn_t cycx_isr(int irq, void *dev_id)
		goto out;

		if (card->in_isr) {
		printk(KERN_WARNING "%s: interrupt re-entrancy on IRQ %d!\n",
		pr_warn("%s: interrupt re-entrancy on IRQ %d!\n",
		card->devname, card->wandev.irq);
		goto out;
		}
		@@ -337,7 +334,7 @@ void cycx_set_state(struct cycx_device *card, int state)
		string_state = "disconnected!";
		break;
		}
		printk(KERN_INFO "%s: link %s\n", card->devname, string_state);
		pr_info("%s: link %s\n", card->devname, string_state);
		card->wandev.state = state;
		}

drivers/net/wan/cycx_x25.c

+82 −95

Original line number	Diff line number	Diff line
		@@ -76,6 +76,8 @@
		* 1998/08/08 acme Initial version.
		*/

		#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

		#define CYCLOMX_X25_DEBUG 1

		#include <linux/ctype.h> /* isdigit() */
		@@ -230,7 +232,7 @@ int cycx_x25_wan_init(struct cycx_device card, wandev_conf_t conf)

		/* Verify configuration ID */
		if (conf->config_id != WANCONFIG_X25) {
		printk(KERN_INFO "%s: invalid configuration ID %u!\n",
		pr_info("%s: invalid configuration ID %u!\n",
		card->devname, conf->config_id);
		return -EINVAL;
		}
		@@ -374,8 +376,7 @@ static int cycx_wan_new_if(struct wan_device wandev, struct net_device dev,
		int err = 0;

		if (!conf->name[0] \|\| strlen(conf->name) > WAN_IFNAME_SZ) {
		printk(KERN_INFO "%s: invalid interface name!\n",
		card->devname);
		pr_info("%s: invalid interface name!\n", card->devname);
		return -EINVAL;
		}

		@@ -398,7 +399,7 @@ static int cycx_wan_new_if(struct wan_device wandev, struct net_device dev,

		if (len) {
		if (len > WAN_ADDRESS_SZ) {
		printk(KERN_ERR "%s: %s local addr too long!\n",
		pr_err("%s: %s local addr too long!\n",
		wandev->name, chan->name);
		err = -EINVAL;
		goto error;
		@@ -429,14 +430,13 @@ static int cycx_wan_new_if(struct wan_device wandev, struct net_device dev,
		if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc)
		chan->lcn = lcn;
		else {
		printk(KERN_ERR
		"%s: PVC %u is out of range on interface %s!\n",
		pr_err("%s: PVC %u is out of range on interface %s!\n",
		wandev->name, lcn, chan->name);
		err = -EINVAL;
		goto error;
		}
		} else {
		printk(KERN_ERR "%s: invalid media address on interface %s!\n",
		pr_err("%s: invalid media address on interface %s!\n",
		wandev->name, chan->name);
		err = -EINVAL;
		goto error;
		@@ -607,8 +607,7 @@ static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
		++chan->ifstats.tx_dropped;
		else if (chan->svc && chan->protocol &&
		chan->protocol != ntohs(skb->protocol)) {
		printk(KERN_INFO
		"%s: unsupported Ethertype 0x%04X on interface %s!\n",
		pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n",
		card->devname, ntohs(skb->protocol), dev->name);
		++chan->ifstats.tx_errors;
		} else if (chan->protocol == ETH_P_IP) {
		@@ -643,8 +642,7 @@ static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
		cycx_x25_chan_disconnect(dev);
		goto free_packet;
		default:
		printk(KERN_INFO
		"%s: unknown %d x25-iface request on %s!\n",
		pr_info("%s: unknown %d x25-iface request on %s!\n",
		card->devname, skb->data[0], dev->name);
		++chan->ifstats.tx_errors;
		goto free_packet;
		@@ -746,8 +744,7 @@ static void cycx_x25_irq_tx(struct cycx_device card, struct cycx_x25_cmd cmd)
		card->buff_int_mode_unbusy = 1;
		netif_wake_queue(dev);
		} else
		printk(KERN_ERR "%s:ackvc for inexistent lcn %d\n",
		card->devname, lcn);
		pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn);
		}

		/* Receive interrupt handler.
		@@ -780,7 +777,7 @@ static void cycx_x25_irq_rx(struct cycx_device card, struct cycx_x25_cmd cmd)
		dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
		if (!dev) {
		/* Invalid channel, discard packet */
		printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n",
		pr_info("%s: receiving on orphaned LCN %d!\n",
		card->devname, lcn);
		return;
		}
		@@ -802,7 +799,7 @@ static void cycx_x25_irq_rx(struct cycx_device card, struct cycx_x25_cmd cmd)
		if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) +
		bufsize +
		dev->hard_header_len)) == NULL) {
		printk(KERN_INFO "%s: no socket buffers available!\n",
		pr_info("%s: no socket buffers available!\n",
		card->devname);
		chan->drop_sequence = 1;
		++chan->ifstats.rx_dropped;
		@@ -826,8 +823,8 @@ static void cycx_x25_irq_rx(struct cycx_device card, struct cycx_x25_cmd cmd)
		if (bitm)
		chan->drop_sequence = 1;

		printk(KERN_INFO "%s: unexpectedly long packet sequence "
		"on interface %s!\n", card->devname, dev->name);
		pr_info("%s: unexpectedly long packet sequence on interface %s!\n",
		card->devname, dev->name);
		++chan->ifstats.rx_length_errors;
		return;
		}
		@@ -880,7 +877,7 @@ static void cycx_x25_irq_connect(struct cycx_device *card,
		dev = cycx_x25_get_dev_by_dte_addr(wandev, rem);
		if (!dev) {
		/* Invalid channel, discard packet */
		printk(KERN_INFO "%s: connect not expected: remote %s!\n",
		pr_info("%s: connect not expected: remote %s!\n",
		card->devname, rem);
		return;
		}
		@@ -909,8 +906,8 @@ static void cycx_x25_irq_connect_confirm(struct cycx_device *card,
		if (!dev) {
		/* Invalid channel, discard packet */
		clear_bit(--key, (void*)&card->u.x.connection_keys);
		printk(KERN_INFO "%s: connect confirm not expected: lcn %d, "
		"key=%d!\n", card->devname, lcn, key);
		pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n",
		card->devname, lcn, key);
		return;
		}

		@@ -934,7 +931,7 @@ static void cycx_x25_irq_disconnect_confirm(struct cycx_device *card,
		dev = cycx_x25_get_dev_by_lcn(wandev, lcn);
		if (!dev) {
		/* Invalid channel, discard packet */
		printk(KERN_INFO "%s:disconnect confirm not expected!:lcn %d\n",
		pr_info("%s:disconnect confirm not expected!:lcn %d\n",
		card->devname, lcn);
		return;
		}
		@@ -980,13 +977,13 @@ static void cycx_x25_irq_log(struct cycx_device card, struct cycx_x25_cmd cmd)
		cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1);
		cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1);

		printk(KERN_INFO "cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n");
		printk(KERN_INFO "cmd->buf=0x%X\n", cmd->buf);
		printk(KERN_INFO "Log message code=0x%X\n", msg_code);
		printk(KERN_INFO "Link=%d\n", link);
		printk(KERN_INFO "log code=0x%X\n", code);
		printk(KERN_INFO "log routine=0x%X\n", routine);
		printk(KERN_INFO "Message size=%d\n", size);
		pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n");
		pr_info("cmd->buf=0x%X\n", cmd->buf);
		pr_info("Log message code=0x%X\n", msg_code);
		pr_info("Link=%d\n", link);
		pr_info("log code=0x%X\n", code);
		pr_info("log routine=0x%X\n", routine);
		pr_info("Message size=%d\n", size);
		hex_dump("Message", bf, toread);
		#endif
		}
		@@ -1009,24 +1006,14 @@ static void cycx_x25_irq_stat(struct cycx_device *card,
		static void cycx_x25_irq_spurious(struct cycx_device *card,
		struct cycx_x25_cmd *cmd)
		{
		printk(KERN_INFO "%s: spurious interrupt (0x%X)!\n",
		pr_info("%s: spurious interrupt (0x%X)!\n",
		card->devname, cmd->command);
		}
		#ifdef CYCLOMX_X25_DEBUG
		static void hex_dump(char msg, unsigned char p, int len)
		{
		unsigned char hex[1024],
		* phex = hex;

		if (len >= (sizeof(hex) / 2))
		len = (sizeof(hex) / 2) - 1;

		while (len--) {
		sprintf(phex, "%02x", *p++);
		phex += 2;
		}

		printk(KERN_INFO "%s: %s\n", msg, hex);
		print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1,
		p, len, true);
		}
		#endif

		@@ -1203,8 +1190,8 @@ static int x25_place_call(struct cycx_device *card,
		u8 key;

		if (card->u.x.connection_keys == ~0U) {
		printk(KERN_INFO "%s: too many simultaneous connection "
		"requests!\n", card->devname);
		pr_info("%s: too many simultaneous connection requests!\n",
		card->devname);
		return -EAGAIN;
		}

		@@ -1381,7 +1368,7 @@ static void cycx_x25_chan_timer(unsigned long d)
		if (chan->state == WAN_CONNECTED)
		cycx_x25_chan_disconnect(dev);
		else
		printk(KERN_ERR "%s: %s for svc (%s) not connected!\n",
		pr_err("%s: %s for svc (%s) not connected!\n",
		chan->card->devname, __func__, dev->name);
		}

		@@ -1433,8 +1420,8 @@ static void cycx_x25_set_chan_state(struct net_device *dev, u8 state)
		break;
		}

		printk(KERN_INFO "%s: interface %s %s\n", card->devname,
		dev->name, string_state);
		pr_info("%s: interface %s %s\n",
		card->devname, dev->name, string_state);
		chan->state = state;
		}

		@@ -1488,7 +1475,7 @@ static void cycx_x25_chan_send_event(struct net_device *dev, u8 event)
		unsigned char *ptr;

		if ((skb = dev_alloc_skb(1)) == NULL) {
		printk(KERN_ERR "%s: out of memory\n", __func__);
		pr_err("%s: out of memory\n", __func__);
		return;
		}

		@@ -1557,54 +1544,54 @@ static void reset_timer(struct net_device *dev)
		#ifdef CYCLOMX_X25_DEBUG
		static void cycx_x25_dump_config(struct cycx_x25_config *conf)
		{
		printk(KERN_INFO "X.25 configuration\n");
		printk(KERN_INFO "-----------------\n");
		printk(KERN_INFO "link number=%d\n", conf->link);
		printk(KERN_INFO "line speed=%d\n", conf->speed);
		printk(KERN_INFO "clock=%sternal\n", conf->clock == 8 ? "Ex" : "In");
		printk(KERN_INFO "# level 2 retransm.=%d\n", conf->n2);
		printk(KERN_INFO "level 2 window=%d\n", conf->n2win);
		printk(KERN_INFO "level 3 window=%d\n", conf->n3win);
		printk(KERN_INFO "# logical channels=%d\n", conf->nvc);
		printk(KERN_INFO "level 3 pkt len=%d\n", conf->pktlen);
		printk(KERN_INFO "my address=%d\n", conf->locaddr);
		printk(KERN_INFO "remote address=%d\n", conf->remaddr);
		printk(KERN_INFO "t1=%d seconds\n", conf->t1);
		printk(KERN_INFO "t2=%d seconds\n", conf->t2);
		printk(KERN_INFO "t21=%d seconds\n", conf->t21);
		printk(KERN_INFO "# PVCs=%d\n", conf->npvc);
		printk(KERN_INFO "t23=%d seconds\n", conf->t23);
		printk(KERN_INFO "flags=0x%x\n", conf->flags);
		pr_info("X.25 configuration\n");
		pr_info("-----------------\n");
		pr_info("link number=%d\n", conf->link);
		pr_info("line speed=%d\n", conf->speed);
		pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In");
		pr_info("# level 2 retransm.=%d\n", conf->n2);
		pr_info("level 2 window=%d\n", conf->n2win);
		pr_info("level 3 window=%d\n", conf->n3win);
		pr_info("# logical channels=%d\n", conf->nvc);
		pr_info("level 3 pkt len=%d\n", conf->pktlen);
		pr_info("my address=%d\n", conf->locaddr);
		pr_info("remote address=%d\n", conf->remaddr);
		pr_info("t1=%d seconds\n", conf->t1);
		pr_info("t2=%d seconds\n", conf->t2);
		pr_info("t21=%d seconds\n", conf->t21);
		pr_info("# PVCs=%d\n", conf->npvc);
		pr_info("t23=%d seconds\n", conf->t23);
		pr_info("flags=0x%x\n", conf->flags);
		}

		static void cycx_x25_dump_stats(struct cycx_x25_stats *stats)
		{
		printk(KERN_INFO "X.25 statistics\n");
		printk(KERN_INFO "--------------\n");
		printk(KERN_INFO "rx_crc_errors=%d\n", stats->rx_crc_errors);
		printk(KERN_INFO "rx_over_errors=%d\n", stats->rx_over_errors);
		printk(KERN_INFO "n2_tx_frames=%d\n", stats->n2_tx_frames);
		printk(KERN_INFO "n2_rx_frames=%d\n", stats->n2_rx_frames);
		printk(KERN_INFO "tx_timeouts=%d\n", stats->tx_timeouts);
		printk(KERN_INFO "rx_timeouts=%d\n", stats->rx_timeouts);
		printk(KERN_INFO "n3_tx_packets=%d\n", stats->n3_tx_packets);
		printk(KERN_INFO "n3_rx_packets=%d\n", stats->n3_rx_packets);
		printk(KERN_INFO "tx_aborts=%d\n", stats->tx_aborts);
		printk(KERN_INFO "rx_aborts=%d\n", stats->rx_aborts);
		pr_info("X.25 statistics\n");
		pr_info("--------------\n");
		pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors);
		pr_info("rx_over_errors=%d\n", stats->rx_over_errors);
		pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames);
		pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames);
		pr_info("tx_timeouts=%d\n", stats->tx_timeouts);
		pr_info("rx_timeouts=%d\n", stats->rx_timeouts);
		pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets);
		pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets);
		pr_info("tx_aborts=%d\n", stats->tx_aborts);
		pr_info("rx_aborts=%d\n", stats->rx_aborts);
		}

		static void cycx_x25_dump_devs(struct wan_device *wandev)
		{
		struct net_device *dev = wandev->dev;

		printk(KERN_INFO "X.25 dev states\n");
		printk(KERN_INFO "name: addr: txoff: protocol:\n");
		printk(KERN_INFO "---------------------------------------\n");
		pr_info("X.25 dev states\n");
		pr_info("name: addr: txoff: protocol:\n");
		pr_info("---------------------------------------\n");

		while(dev) {
		struct cycx_x25_channel *chan = netdev_priv(dev);

		printk(KERN_INFO "%-5.5s %-15.15s %d ETH_P_%s\n",
		pr_info("%-5.5s %-15.15s %d ETH_P_%s\n",
		chan->name, chan->addr, netif_queue_stopped(dev),
		chan->protocol == ETH_P_IP ? "IP" : "X25");
		dev = chan->slave;