Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d1b49b68 authored by Joonwoo Park's avatar Joonwoo Park Committed by Linus Walleij
Browse files

pinctrl: qcom: Add msm8996 pinctrl driver 



Add initial pinctrl driver to support pin configuration with
pinctrl framework for msm8996.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: default avatarJoonwoo Park <joonwoop@codeaurora.org>
[sboyd@codeaurora.org: Remove duplicate entries and enums]
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarBjörn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent ab4256cf

Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt

0 → 100644
+199 −0
Original line number Original line Diff line number Diff line 
Qualcomm MSM8996 TLMM block



This binding describes the Top Level Mode Multiplexer block found in the

MSM8996 platform.



- compatible:

	Usage: required

	Value type: <string>

	Definition: must be "qcom,msm8996-pinctrl"



- reg:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: the base address and size of the TLMM register space.



- interrupts:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: should specify the TLMM summary IRQ.



- interrupt-controller:

	Usage: required

	Value type: <none>

	Definition: identifies this node as an interrupt controller



- #interrupt-cells:

	Usage: required

	Value type: <u32>

	Definition: must be 2. Specifying the pin number and flags, as defined

		    in <dt-bindings/interrupt-controller/irq.h>



- gpio-controller:

	Usage: required

	Value type: <none>

	Definition: identifies this node as a gpio controller



- #gpio-cells:

	Usage: required

	Value type: <u32>

	Definition: must be 2. Specifying the pin number and flags, as defined

		    in <dt-bindings/gpio/gpio.h>



Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for

a general description of GPIO and interrupt bindings.



Please refer to pinctrl-bindings.txt in this directory for details of the

common pinctrl bindings used by client devices, including the meaning of the

phrase "pin configuration node".



The pin configuration nodes act as a container for an arbitrary number of

subnodes. Each of these subnodes represents some desired configuration for a

pin, a group, or a list of pins or groups. This configuration can include the

mux function to select on those pin(s)/group(s), and various pin configuration

parameters, such as pull-up, drive strength, etc.





PIN CONFIGURATION NODES:



The name of each subnode is not important; all subnodes should be enumerated

and processed purely based on their content.



Each subnode only affects those parameters that are explicitly listed. In

other words, a subnode that lists a mux function but no pin configuration

parameters implies no information about any pin configuration parameters.

Similarly, a pin subnode that describes a pullup parameter implies no

information about e.g. the mux function.





The following generic properties as defined in pinctrl-bindings.txt are valid

to specify in a pin configuration subnode:



- pins:

	Usage: required

	Value type: <string-array>

	Definition: List of gpio pins affected by the properties specified in

		    this subnode.



		    Valid pins are:

		      gpio0-gpio149

		        Supports mux, bias and drive-strength



		      sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,

		      sdc2_data sdc1_rclk

		        Supports bias and drive-strength



- function:

	Usage: required

	Value type: <string>

	Definition: Specify the alternative function to be configured for the

		    specified pins. Functions are only valid for gpio pins.

		    Valid values are:



		    blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,

		    bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,

		    qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,

		    dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,

		    blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,

		    mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,

		    atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,

		    cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,

		    pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,

		    qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,

		    qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,

		    atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,

		    atest_usb20, atest_char0, dac_calib10, qdss_stm10,

		    qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,

		    blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,

		    qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,

		    qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,

		    dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,

		    qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,

		    dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,

		    dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,

		    dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,

		    dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,

		    sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,

		    qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,

		    uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,

		    blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,

		    qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,

		    blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,

		    cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,

		    blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,

		    qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,

		    isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,

		    qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,

		    sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,

		    gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,

		    qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,

		    tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,

		    qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,

		    sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,

		    sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,

		    ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,

		    blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,

		    pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,

		    qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,

		    qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,

		    gpio



- bias-disable:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as no pull.



- bias-pull-down:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as pull down.



- bias-pull-up:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as pull up.



- output-high:

	Usage: optional

	Value type: <none>

	Definition: The specified pins are configured in output mode, driven

		    high.

		    Not valid for sdc pins.



- output-low:

	Usage: optional

	Value type: <none>

	Definition: The specified pins are configured in output mode, driven

		    low.

		    Not valid for sdc pins.



- drive-strength:

	Usage: optional

	Value type: <u32>

	Definition: Selects the drive strength for the specified pins, in mA.

		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16



Example:



	tlmm: pinctrl@01010000 {

		compatible = "qcom,msm8996-pinctrl";

		reg = <0x01010000 0x300000>;

		interrupts = <0 208 0>;

		gpio-controller;

		#gpio-cells = <2>;

		interrupt-controller;

		#interrupt-cells = <2>;



		uart_console_active: uart_console_active {

			mux {

				pins = "gpio4", "gpio5";

				function = "blsp_uart8";

			};



			config {

				pins = "gpio4", "gpio5";

				drive-strength = <2>;

				bias-disable;

			};

		};

	};

drivers/pinctrl/qcom/Kconfig

+8 −0
Original line number Original line Diff line number Diff line
@@ -63,6 +63,14 @@ config PINCTRL_MSM8916 
	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the

	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the

	  Qualcomm TLMM block found on the Qualcomm 8916 platform.

	  Qualcomm TLMM block found on the Qualcomm 8916 platform.





config PINCTRL_MSM8996

	tristate "Qualcomm MSM8996 pin controller driver"

	depends on GPIOLIB && OF

	select PINCTRL_MSM

	help

	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the

	  Qualcomm TLMM block found in the Qualcomm MSM8996 platform.



config PINCTRL_QDF2XXX

config PINCTRL_QDF2XXX

	tristate "Qualcomm Technologies QDF2xxx pin controller driver"

	tristate "Qualcomm Technologies QDF2xxx pin controller driver"

	depends on GPIOLIB && ACPI

	depends on GPIOLIB && ACPI

drivers/pinctrl/qcom/Makefile

+1 −0
Original line number Original line Diff line number Diff line
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o 
obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o

obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o

obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o

obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o

obj-$(CONFIG_PINCTRL_MSM8916)	+= pinctrl-msm8916.o

obj-$(CONFIG_PINCTRL_MSM8916)	+= pinctrl-msm8916.o

obj-$(CONFIG_PINCTRL_MSM8996)   += pinctrl-msm8996.o

obj-$(CONFIG_PINCTRL_QDF2XXX)	+= pinctrl-qdf2xxx.o

obj-$(CONFIG_PINCTRL_QDF2XXX)	+= pinctrl-qdf2xxx.o

obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o

obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o

obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o

obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o