leds: Kconfig cleanup (d09e1666) · Commits · e / devices / android_kernel_teracube_emerald

drivers/leds/Kconfig

+39 −36

Original line number	Diff line number	Diff line
		@@ -15,6 +15,8 @@ config LEDS_CLASS
		This option enables the led sysfs class in /sys/class/leds. You'll
		need this to do anything useful with LEDs. If unsure, say N.

		if LEDS_CLASS

		comment "LED drivers"

		config LEDS_88PM860X
		@@ -26,73 +28,73 @@ config LEDS_88PM860X

		config LEDS_ATMEL_PWM
		tristate "LED Support using Atmel PWM outputs"
		depends on LEDS_CLASS && ATMEL_PWM
		depends on ATMEL_PWM
		help
		This option enables support for LEDs driven using outputs
		of the dedicated PWM controller found on newer Atmel SOCs.

		config LEDS_LOCOMO
		tristate "LED Support for Locomo device"
		depends on LEDS_CLASS && SHARP_LOCOMO
		depends on SHARP_LOCOMO
		help
		This option enables support for the LEDs on Sharp Locomo.
		Zaurus models SL-5500 and SL-5600.

		config LEDS_MIKROTIK_RB532
		tristate "LED Support for Mikrotik Routerboard 532"
		depends on LEDS_CLASS && MIKROTIK_RB532
		depends on MIKROTIK_RB532
		help
		This option enables support for the so called "User LED" of
		Mikrotik's Routerboard 532.

		config LEDS_S3C24XX
		tristate "LED Support for Samsung S3C24XX GPIO LEDs"
		depends on LEDS_CLASS && ARCH_S3C2410
		depends on ARCH_S3C2410
		help
		This option enables support for LEDs connected to GPIO lines
		on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.

		config LEDS_AMS_DELTA
		tristate "LED Support for the Amstrad Delta (E3)"
		depends on LEDS_CLASS && MACH_AMS_DELTA
		depends on MACH_AMS_DELTA
		help
		This option enables support for the LEDs on Amstrad Delta (E3).

		config LEDS_NET48XX
		tristate "LED Support for Soekris net48xx series Error LED"
		depends on LEDS_CLASS && SCx200_GPIO
		depends on SCx200_GPIO
		help
		This option enables support for the Soekris net4801 and net4826 error
		LED.

		config LEDS_FSG
		tristate "LED Support for the Freecom FSG-3"
		depends on LEDS_CLASS && MACH_FSG
		depends on MACH_FSG
		help
		This option enables support for the LEDs on the Freecom FSG-3.

		config LEDS_WRAP
		tristate "LED Support for the WRAP series LEDs"
		depends on LEDS_CLASS && SCx200_GPIO
		depends on SCx200_GPIO
		help
		This option enables support for the PCEngines WRAP programmable LEDs.

		config LEDS_ALIX2
		tristate "LED Support for ALIX.2 and ALIX.3 series"
		depends on LEDS_CLASS && X86 && !GPIO_CS5535 && !CS5535_GPIO
		depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
		help
		This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
		You have to set leds-alix2.force=1 for boards with Award BIOS.

		config LEDS_H1940
		tristate "LED Support for iPAQ H1940 device"
		depends on LEDS_CLASS && ARCH_H1940
		depends on ARCH_H1940
		help
		This option enables support for the LEDs on the h1940.

		config LEDS_COBALT_QUBE
		tristate "LED Support for the Cobalt Qube series front LED"
		depends on LEDS_CLASS && MIPS_COBALT
		depends on MIPS_COBALT
		help
		This option enables support for the front LED on Cobalt Qube series

		@@ -105,7 +107,7 @@ config LEDS_COBALT_RAQ

		config LEDS_SUNFIRE
		tristate "LED support for SunFire servers."
		depends on LEDS_CLASS && SPARC64
		depends on SPARC64
		select LEDS_TRIGGERS
		help
		This option enables support for the Left, Middle, and Right
		@@ -113,14 +115,14 @@ config LEDS_SUNFIRE

		config LEDS_HP6XX
		tristate "LED Support for the HP Jornada 6xx"
		depends on LEDS_CLASS && SH_HP6XX
		depends on SH_HP6XX
		help
		This option enables LED support for the handheld
		HP Jornada 620/660/680/690.

		config LEDS_PCA9532
		tristate "LED driver for PCA9532 dimmer"
		depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
		depends on I2C && INPUT && EXPERIMENTAL
		help
		This option enables support for NXP pca9532
		LED controller. It is generally only useful
		@@ -128,7 +130,7 @@ config LEDS_PCA9532

		config LEDS_GPIO
		tristate "LED Support for GPIO connected LEDs"
		depends on LEDS_CLASS && GENERIC_GPIO
		depends on GENERIC_GPIO
		help
		This option enables support for the LEDs connected to GPIO
		outputs. To be useful the particular board must have LEDs
		@@ -155,7 +157,7 @@ config LEDS_GPIO_OF

		config LEDS_LP3944
		tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
		depends on LEDS_CLASS && I2C
		depends on I2C
		help
		This option enables support for LEDs connected to the National
		Semiconductor LP3944 Lighting Management Unit (LMU) also known as
		@@ -166,7 +168,7 @@ config LEDS_LP3944

		config LEDS_CLEVO_MAIL
		tristate "Mail LED on Clevo notebook"
		depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
		depends on X86 && SERIO_I8042 && DMI
		help
		This driver makes the mail LED accessible from userspace
		programs through the leds subsystem. This LED have three
		@@ -196,7 +198,7 @@ config LEDS_CLEVO_MAIL

		config LEDS_PCA955X
		tristate "LED Support for PCA955x I2C chips"
		depends on LEDS_CLASS && I2C
		depends on I2C
		help
		This option enables support for LEDs connected to PCA955x
		LED driver chips accessed via the I2C bus. Supported
		@@ -204,54 +206,54 @@ config LEDS_PCA955X

		config LEDS_WM831X_STATUS
		tristate "LED support for status LEDs on WM831x PMICs"
		depends on LEDS_CLASS && MFD_WM831X
		depends on MFD_WM831X
		help
		This option enables support for the status LEDs of the WM831x
		series of PMICs.

		config LEDS_WM8350
		tristate "LED Support for WM8350 AudioPlus PMIC"
		depends on LEDS_CLASS && MFD_WM8350
		depends on MFD_WM8350
		help
		This option enables support for LEDs driven by the Wolfson
		Microelectronics WM8350 AudioPlus PMIC.

		config LEDS_DA903X
		tristate "LED Support for DA9030/DA9034 PMIC"
		depends on LEDS_CLASS && PMIC_DA903X
		depends on PMIC_DA903X
		help
		This option enables support for on-chip LED drivers found
		on Dialog Semiconductor DA9030/DA9034 PMICs.

		config LEDS_DAC124S085
		tristate "LED Support for DAC124S085 SPI DAC"
		depends on LEDS_CLASS && SPI
		depends on SPI
		help
		This option enables support for DAC124S085 SPI DAC from NatSemi,
		which can be used to control up to four LEDs.

		config LEDS_PWM
		tristate "PWM driven LED Support"
		depends on LEDS_CLASS && HAVE_PWM
		depends on HAVE_PWM
		help
		This option enables support for pwm driven LEDs

		config LEDS_REGULATOR
		tristate "REGULATOR driven LED support"
		depends on LEDS_CLASS && REGULATOR
		depends on REGULATOR
		help
		This option enables support for regulator driven LEDs.

		config LEDS_BD2802
		tristate "LED driver for BD2802 RGB LED"
		depends on LEDS_CLASS && I2C
		depends on I2C
		help
		This option enables support for BD2802GU RGB LED driver chips
		accessed via the I2C bus.

		config LEDS_INTEL_SS4200
		tristate "LED driver for Intel NAS SS4200 series"
		depends on LEDS_CLASS && PCI && DMI
		depends on PCI && DMI
		help
		This option enables support for the Intel SS4200 series of
		Network Attached Storage servers. You may control the hard
		@@ -260,7 +262,7 @@ config LEDS_INTEL_SS4200

		config LEDS_LT3593
		tristate "LED driver for LT3593 controllers"
		depends on LEDS_CLASS && GENERIC_GPIO
		depends on GENERIC_GPIO
		help
		This option enables support for LEDs driven by a Linear Technology
		LT3593 controller. This controller uses a special one-wire pulse
		@@ -268,7 +270,7 @@ config LEDS_LT3593

		config LEDS_ADP5520
		tristate "LED Support for ADP5520/ADP5501 PMIC"
		depends on LEDS_CLASS && PMIC_ADP5520
		depends on PMIC_ADP5520
		help
		This option enables support for on-chip LED drivers found
		on Analog Devices ADP5520/ADP5501 PMICs.
		@@ -276,8 +278,6 @@ config LEDS_ADP5520
		To compile this driver as a module, choose M here: the module will
		be called leds-adp5520.

		comment "LED Triggers"

		config LEDS_TRIGGERS
		bool "LED Trigger support"
		help
		@@ -285,9 +285,12 @@ config LEDS_TRIGGERS
		These triggers allow kernel events to drive the LEDs and can
		be configured via sysfs. If unsure, say Y.

		if LEDS_TRIGGERS

		comment "LED Triggers"

		config LEDS_TRIGGER_TIMER
		tristate "LED Timer Trigger"
		depends on LEDS_TRIGGERS
		help
		This allows LEDs to be controlled by a programmable timer
		via sysfs. Some LED hardware can be programmed to start
		@@ -298,14 +301,13 @@ config LEDS_TRIGGER_TIMER

		config LEDS_TRIGGER_IDE_DISK
		bool "LED IDE Disk Trigger"
		depends on LEDS_TRIGGERS && IDE_GD_ATA
		depends on IDE_GD_ATA
		help
		This allows LEDs to be controlled by IDE disk activity.
		If unsure, say Y.

		config LEDS_TRIGGER_HEARTBEAT
		tristate "LED Heartbeat Trigger"
		depends on LEDS_TRIGGERS
		help
		This allows LEDs to be controlled by a CPU load average.
		The flash frequency is a hyperbolic function of the 1-minute
		@@ -314,7 +316,6 @@ config LEDS_TRIGGER_HEARTBEAT

		config LEDS_TRIGGER_BACKLIGHT
		tristate "LED backlight Trigger"
		depends on LEDS_TRIGGERS
		help
		This allows LEDs to be controlled as a backlight device: they
		turn off and on when the display is blanked and unblanked.
		@@ -323,7 +324,6 @@ config LEDS_TRIGGER_BACKLIGHT

		config LEDS_TRIGGER_GPIO
		tristate "LED GPIO Trigger"
		depends on LEDS_TRIGGERS
		depends on GPIOLIB
		help
		This allows LEDs to be controlled by gpio events. It's good
		@@ -336,7 +336,6 @@ config LEDS_TRIGGER_GPIO

		config LEDS_TRIGGER_DEFAULT_ON
		tristate "LED Default ON Trigger"
		depends on LEDS_TRIGGERS
		help
		This allows LEDs to be initialised in the ON state.
		If unsure, say Y.
		@@ -344,4 +343,8 @@ config LEDS_TRIGGER_DEFAULT_ON
		comment "iptables trigger is under Netfilter config (LED target)"
		depends on LEDS_TRIGGERS

		endif # LEDS_TRIGGERS

		endif # LEDS_CLASS

		endif # NEW_LEDS