Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ca5a4b56 authored by Marek Vasut's avatar Marek Vasut Committed by Nicolas Ferre
Browse files

ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK 



Add support for the DENX MA5D4 SoM and MA5D4EVK board. The system
consists of a SoM with eMMC, SPI NOR for booting, 2x SPI CAN chip
and an EVK with microSD slot, 2x UART, 2x CAN port, 3x USB port,
LEDs and expansion headers.

Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Josh Wu <josh.wu@atmel.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 49f66974

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -48,6 +48,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ 
	sama5d34ek.dtb \

	sama5d35ek.dtb \

	sama5d36ek.dtb \

	at91-sama5d4_ma5d4evk.dtb \

	at91-sama5d4_xplained.dtb \

	at91-sama5d4ek.dtb

dtb-$(CONFIG_ARCH_ATLAS6) += \

arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi

0 → 100644
+127 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2015 Marek Vasut <marex@denx.de>

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



#include "sama5d4.dtsi"



/ {

	model = "DENX MA5D4";

	compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";



	memory {

		reg = <0x20000000 0x10000000>;

	};



	clocks {

		main_clock: main_clock {

			compatible = "atmel,osc", "fixed-clock";

			clock-frequency = <12000000>;

		};



		clk20m: clk20m {

			compatible = "fixed-clock";

			#clock-cells = <0>;

			clock-frequency = <20000000>;

			clock-output-names = "clk20m";

		};

	};



	ahb {

		apb {

			mmc0: mmc@f8000000 {

				pinctrl-names = "default";

				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;

				vmmc-supply = <&vcc_mmc0_reg>;

				vqmmc-supply = <&vcc_3v3_reg>;

				status = "okay";

				slot@0 {

					reg = <0>;

					bus-width = <8>;

					broken-cd;

				};

			};



			spi0: spi@f8010000 {

				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;

				status = "okay";



				m25p80@0 {

					compatible = "atmel,at25df321a";

					spi-max-frequency = <50000000>;

					reg = <0>;

				};

			};



			i2c0: i2c@f8014000 {

				status = "okay";

			};



			spi1: spi@fc018000 {

				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;

				status = "okay";



				can0: can@0 {

					compatible = "microchip,mcp2515";

					reg = <0>;

					clocks = <&clk20m>;

					interrupt-parent = <&pioE>;

					interrupts = <6 GPIO_ACTIVE_LOW>;

					spi-max-frequency = <10000000>;

				};



				can1: can@1 {

					compatible = "microchip,mcp2515";

					reg = <1>;

					clocks = <&clk20m>;

					interrupt-parent = <&pioE>;

					interrupts = <7 GPIO_ACTIVE_LOW>;

					spi-max-frequency = <10000000>;

				};

			};



			adc0: adc@fc034000 {

				pinctrl-names = "default";

				pinctrl-0 = <

					/* external trigger conflicts with USBA_VBUS */

					&pinctrl_adc0_ad0

					&pinctrl_adc0_ad1

					&pinctrl_adc0_ad2

					&pinctrl_adc0_ad3

					&pinctrl_adc0_ad4

					>;

				atmel,adc-vref = <3300>;

				status = "okay";

			};



			watchdog@fc068640 {

				status = "okay";

			};

		};

	};



	vcc_3v3_reg: fixedregulator@0 {

		compatible = "regulator-fixed";

		regulator-name = "VCC 3V3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-boot-on;

		regulator-always-on;

	};



	vcc_mmc0_reg: fixedregulator@1 {

		compatible = "regulator-fixed";

		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;

		regulator-name = "RST_n MCI0";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		vin-supply = <&vcc_3v3_reg>;

		regulator-boot-on;

	};

};

arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts

0 → 100644
+170 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2015 Marek Vasut <marex@denx.de>

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



/dts-v1/;

#include "at91-sama5d4_ma5d4.dtsi"



/ {

	model = "DENX MA5D4EVK";

	compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";



	chosen {

		stdout-path = "serial3:115200n8";

	};



	ahb {

		usb0: gadget@00400000 {

			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;

			pinctrl-names = "default";

			pinctrl-0 = <&pinctrl_usba_vbus>;

			status = "okay";

		};



		usb1: ohci@00500000 {

			num-ports = <3>;

			atmel,vbus-gpio = <0

					   &pioE 11 GPIO_ACTIVE_LOW

					   &pioE 14 GPIO_ACTIVE_LOW

					  >;

			status = "okay";

		};



		usb2: ehci@00600000 {

			status = "okay";

		};



		apb {

			hlcdc: hlcdc@f0000000 {

				status = "okay";



				hlcdc-display-controller {

					pinctrl-names = "default";

					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;



					port@0 {

						hlcdc_panel_output: endpoint@0 {

							reg = <0>;

							remote-endpoint = <&panel_input>;

						};

					};

				};



			};



			macb0: ethernet@f8020000 {

				phy-mode = "rmii";

				status = "okay";



				phy0: ethernet-phy@0 {

					reg = <0>;

				};

			};



			usart0: serial@f802c000 {

				status = "okay";

			};



			usart1: serial@f8030000 {

				status = "okay";

			};



			mmc1: mmc@fc000000 {

				pinctrl-names = "default";

				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;

				vmmc-supply = <&vcc_mmc1_reg>;

				vqmmc-supply = <&vcc_3v3_reg>;

				status = "okay";

				slot@0 {

					reg = <0>;

					bus-width = <4>;

					cd-gpios = <&pioE 5 0>;

				};

			};



			adc0: adc@fc034000 {

				atmel,adc-ts-wires = <4>;

				atmel,adc-ts-pressure-threshold = <10000>;

			};





			pinctrl@fc06a000 {

				board {

					pinctrl_mmc1_cd: mmc1_cd {

						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

					};

					pinctrl_usba_vbus: usba_vbus {

						atmel,pins =

							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;

					};

				};

			};

		};

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&hlcdc_pwm 0 50000 0>;

		brightness-levels = <0 4 8 16 32 64 128 255>;

		default-brightness-level = <6>;

		status = "okay";

	};



	leds {

		compatible = "gpio-leds";

		status = "okay";



		user1 {

			label = "user1";

			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};



		user2 {

			label = "user2";

			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};



		user3 {

			label = "user3";

			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};

	};



	panel: panel {

		/* Actually Ampire 800480R2 */

		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";

		backlight = <&backlight>;

		#address-cells = <1>;

		#size-cells = <0>;

		status = "okay";



		port@0 {

			#address-cells = <1>;

			#size-cells = <0>;



			panel_input: endpoint@0 {

				reg = <0>;

				remote-endpoint = <&hlcdc_panel_output>;

			};

		};

	};



	vcc_mmc1_reg: fixedregulator@2 {

		compatible = "regulator-fixed";

		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;

		regulator-name = "VDD MCI1";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		vin-supply = <&vcc_3v3_reg>;

	};

};