ARM: dts: armada388-clearfog: add base model DTS file

	armada-385-linksys-cobra.dtb \

	armada-385-turris-omnia.dtb \

	armada-388-clearfog.dtb \

	armada-388-clearfog-base.dtb \

	armada-388-db.dtb \

	armada-388-gp.dtb \

	armada-388-rd.dtb

/*

 * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)

 *

 *  Copyright (C) 2015 Russell King

 *

 * This board is in development; the contents of this file work with

 * the A1 rev 2.0 of the board, which does not represent final

 * production board.  Things will change, don't expect this file to

 * remain compatible info the future.

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License

 *     version 2 as published by the Free Software Foundation.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "armada-388-clearfog.dtsi"

/ {

	model = "SolidRun Clearfog Base A1";

	compatible = "solidrun,clearfog-base-a1",

		"solidrun,clearfog-a1", "marvell,armada388",

		"marvell,armada385", "marvell,armada380";

	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-0 = <&rear_button_pins>;

		pinctrl-names = "default";

		button_0 {

			/* The rear SW3 button */

			label = "Rear Button";

			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;

			linux,can-disable;

			linux,code = <BTN_0>;

		};

	};

};

&eth1 {

	phy = <&phy1>;

};

&gpio0 {

	phy1_reset {

		gpio-hog;

		gpios = <19 GPIO_ACTIVE_LOW>;

		output-low;

		line-name = "phy1-reset";

	};

};

&mdio {

	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;

	phy1: ethernet-phy@1 {

		/*

		 * Annoyingly, the marvell phy driver configures the LED

		 * register, rather than preserving reset-loaded setting.

		 * We undo that rubbish here.

		 */

		marvell,reg-init = <3 16 0 0x101e>;

		reg = <1>;

	};

};

&pinctrl {

	/* phy1 reset */

	clearfog_phy_pins: clearfog-phy-pins {

		marvell,pins = "mpp19";

		marvell,function = "gpio";

	};

	rear_button_pins: rear-button-pins {

		marvell,pins = "mpp44";

		marvell,function = "gpio";

	};

};