Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit bd207cfb authored by Linus Walleij's avatar Linus Walleij Committed by Samuel Ortiz
Browse files

rtc: AB3100 RTC support 



This adds support for the RTC found inside the AB3100 Mixed Signal chip.
The symbols used for communicating with the chip is found in the
mfd/ab3100-core.c driver that also provides the platform device.

Signed-off-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
Acked-by: default avatarAlessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 8aba721b

drivers/rtc/Kconfig

+9 −0
Original line number Diff line number Diff line
@@ -545,6 +545,15 @@ config RTC_DRV_PCF50633 
	  If you say yes here you get support for the RTC subsystem of the

	  NXP PCF50633 used in embedded systems.



config RTC_DRV_AB3100

	tristate "ST-Ericsson AB3100 RTC"

	depends on AB3100_CORE

	default y if AB3100_CORE

	help

	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC

	  support. This chip contains a battery- and capacitor-backed RTC.





comment "on-CPU RTC drivers"



config RTC_DRV_OMAP

drivers/rtc/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -17,6 +17,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o 


# Keep the list ordered.



obj-$(CONFIG_RTC_DRV_AB3100)	+= rtc-ab3100.o

obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o

obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o

obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o

drivers/rtc/rtc-ab3100.c

0 → 100644
+281 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2007-2009 ST-Ericsson AB

 * License terms: GNU General Public License (GPL) version 2

 * RTC clock driver for the AB3100 Analog Baseband Chip

 * Author: Linus Walleij <linus.walleij@stericsson.com>

 */

#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/platform_device.h>

#include <linux/rtc.h>

#include <linux/mfd/ab3100.h>



/* Clock rate in Hz */

#define AB3100_RTC_CLOCK_RATE	32768



/*

 * The AB3100 RTC registers. These are the same for

 * AB3000 and AB3100.

 * Control register:

 * Bit 0: RTC Monitor cleared=0, active=1, if you set it

 *        to 1 it remains active until RTC power is lost.

 * Bit 1: 32 kHz Oscillator, 0 = on, 1 = bypass

 * Bit 2: Alarm on, 0 = off, 1 = on

 * Bit 3: 32 kHz buffer disabling, 0 = enabled, 1 = disabled

 */

#define AB3100_RTC		0x53

/* default setting, buffer disabled, alarm on */

#define RTC_SETTING		0x30

/* Alarm when AL0-AL3 == TI0-TI3  */

#define AB3100_AL0		0x56

#define AB3100_AL1		0x57

#define AB3100_AL2		0x58

#define AB3100_AL3		0x59

/* This 48-bit register that counts up at 32768 Hz */

#define AB3100_TI0		0x5a

#define AB3100_TI1		0x5b

#define AB3100_TI2		0x5c

#define AB3100_TI3		0x5d

#define AB3100_TI4		0x5e

#define AB3100_TI5		0x5f



/*

 * RTC clock functions and device struct declaration

 */

static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs)

{

	struct ab3100 *ab3100_data = dev_get_drvdata(dev);

	u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2,

		     AB3100_TI3, AB3100_TI4, AB3100_TI5};

	unsigned char buf[6];

	u64 fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2;

	int err = 0;

	int i;



	buf[0] = (fat_time) & 0xFF;

	buf[1] = (fat_time >> 8) & 0xFF;

	buf[2] = (fat_time >> 16) & 0xFF;

	buf[3] = (fat_time >> 24) & 0xFF;

	buf[4] = (fat_time >> 32) & 0xFF;

	buf[5] = (fat_time >> 40) & 0xFF;



	for (i = 0; i < 6; i++) {

		err = ab3100_set_register_interruptible(ab3100_data,

							regs[i], buf[i]);

		if (err)

			return err;

	}



	/* Set the flag to mark that the clock is now set */

	return ab3100_mask_and_set_register_interruptible(ab3100_data,

							  AB3100_RTC,

							  0xFE, 0x01);



}



static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)

{

	struct ab3100 *ab3100_data = dev_get_drvdata(dev);

	unsigned long time;

	u8 rtcval;

	int err;



	err = ab3100_get_register_interruptible(ab3100_data,

						AB3100_RTC, &rtcval);

	if (err)

		return err;



	if (!(rtcval & 0x01)) {

		dev_info(dev, "clock not set (lost power)");

		return -EINVAL;

	} else {

		u64 fat_time;

		u8 buf[6];



		/* Read out time registers */

		err = ab3100_get_register_page_interruptible(ab3100_data,

							     AB3100_TI0,

							     buf, 6);

		if (err != 0)

			return err;



		fat_time = ((u64) buf[5] << 40) | ((u64) buf[4] << 32) |

			((u64) buf[3] << 24) | ((u64) buf[2] << 16) |

			((u64) buf[1] << 8) | (u64) buf[0];

		time = (unsigned long) (fat_time /

					(u64) (AB3100_RTC_CLOCK_RATE * 2));

	}



	rtc_time_to_tm(time, tm);



	return rtc_valid_tm(tm);

}



static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)

{

	struct ab3100 *ab3100_data = dev_get_drvdata(dev);

	unsigned long time;

	u64 fat_time;

	u8 buf[6];

	u8 rtcval;

	int err;



	/* Figure out if alarm is enabled or not */

	err = ab3100_get_register_interruptible(ab3100_data,

						AB3100_RTC, &rtcval);

	if (err)

		return err;

	if (rtcval & 0x04)

		alarm->enabled = 1;

	else

		alarm->enabled = 0;

	/* No idea how this could be represented */

	alarm->pending = 0;

	/* Read out alarm registers, only 4 bytes */

	err = ab3100_get_register_page_interruptible(ab3100_data,

						     AB3100_AL0, buf, 4);

	if (err)

		return err;

	fat_time = ((u64) buf[3] << 40) | ((u64) buf[2] << 32) |

		((u64) buf[1] << 24) | ((u64) buf[0] << 16);

	time = (unsigned long) (fat_time / (u64) (AB3100_RTC_CLOCK_RATE * 2));



	rtc_time_to_tm(time, &alarm->time);



	return rtc_valid_tm(&alarm->time);

}



static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)

{

	struct ab3100 *ab3100_data = dev_get_drvdata(dev);

	u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3};

	unsigned char buf[4];

	unsigned long secs;

	u64 fat_time;

	int err;

	int i;



	rtc_tm_to_time(&alarm->time, &secs);

	fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2;

	buf[0] = (fat_time >> 16) & 0xFF;

	buf[1] = (fat_time >> 24) & 0xFF;

	buf[2] = (fat_time >> 32) & 0xFF;

	buf[3] = (fat_time >> 40) & 0xFF;



	/* Set the alarm */

	for (i = 0; i < 4; i++) {

		err = ab3100_set_register_interruptible(ab3100_data,

							regs[i], buf[i]);

		if (err)

			return err;

	}

	/* Then enable the alarm */

	return ab3100_mask_and_set_register_interruptible(ab3100_data,

							  AB3100_RTC, ~(1 << 2),

							  alarm->enabled << 2);

}



static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)

{

	struct ab3100 *ab3100_data = dev_get_drvdata(dev);



	/*

	 * It's not possible to enable/disable the alarm IRQ for this RTC.

	 * It does not actually trigger any IRQ: instead its only function is

	 * to power up the system, if it wasn't on. This will manifest as

	 * a "power up cause" in the AB3100 power driver (battery charging etc)

	 * and need to be handled there instead.

	 */

	if (enabled)

		return ab3100_mask_and_set_register_interruptible(ab3100_data,

						    AB3100_RTC, ~(1 << 2),

						    1 << 2);

	else

		return ab3100_mask_and_set_register_interruptible(ab3100_data,

						    AB3100_RTC, ~(1 << 2),

						    0);

}



static const struct rtc_class_ops ab3100_rtc_ops = {

	.read_time	= ab3100_rtc_read_time,

	.set_mmss	= ab3100_rtc_set_mmss,

	.read_alarm	= ab3100_rtc_read_alarm,

	.set_alarm	= ab3100_rtc_set_alarm,

	.alarm_irq_enable = ab3100_rtc_irq_enable,

};



static int __init ab3100_rtc_probe(struct platform_device *pdev)

{

	int err;

	u8 regval;

	struct rtc_device *rtc;

	struct ab3100 *ab3100_data = platform_get_drvdata(pdev);



	/* The first RTC register needs special treatment */

	err = ab3100_get_register_interruptible(ab3100_data,

						AB3100_RTC, &regval);

	if (err) {

		dev_err(&pdev->dev, "unable to read RTC register\n");

		return -ENODEV;

	}



	if ((regval & 0xFE) != RTC_SETTING) {

		dev_warn(&pdev->dev, "not default value in RTC reg 0x%x\n",

			 regval);

	}



	if ((regval & 1) == 0) {

		/*

		 * Set bit to detect power loss.

		 * This bit remains until RTC power is lost.

		 */

		regval = 1 | RTC_SETTING;

		err = ab3100_set_register_interruptible(ab3100_data,

							AB3100_RTC, regval);

		/* Ignore any error on this write */

	}



	rtc = rtc_device_register("ab3100-rtc", &pdev->dev, &ab3100_rtc_ops,

				  THIS_MODULE);

	if (IS_ERR(rtc)) {

		err = PTR_ERR(rtc);

		return err;

	}



	return 0;

}



static int __exit ab3100_rtc_remove(struct platform_device *pdev)

{

	struct rtc_device *rtc = platform_get_drvdata(pdev);



	rtc_device_unregister(rtc);

	return 0;

}



static struct platform_driver ab3100_rtc_driver = {

	.driver = {

		.name = "ab3100-rtc",

		.owner = THIS_MODULE,

	},

	.remove	 = __exit_p(ab3100_rtc_remove),

};



static int __init ab3100_rtc_init(void)

{

	return platform_driver_probe(&ab3100_rtc_driver,

				     ab3100_rtc_probe);

}



static void __exit ab3100_rtc_exit(void)

{

	platform_driver_unregister(&ab3100_rtc_driver);

}



module_init(ab3100_rtc_init);

module_exit(ab3100_rtc_exit);



MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");

MODULE_DESCRIPTION("AB3100 RTC Driver");

MODULE_LICENSE("GPL");