Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit bb6e9590 authored by Olof Johansson's avatar Olof Johansson Committed by Jeff Garzik
Browse files

pasemi_mac: PHY support 



PHY support for pasemi_mac.

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent ceb51361

drivers/net/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -2488,6 +2488,7 @@ config NETXEN_NIC 
config PASEMI_MAC

	tristate "PA Semi 1/10Gbit MAC"

	depends on PPC64 && PCI

	select PHYLIB

	help

	  This driver supports the on-chip 1/10Gbit Ethernet controller on

	  PA Semi's PWRficient line of chips.

drivers/net/pasemi_mac.c

+126 −0
Original line number Diff line number Diff line
@@ -606,6 +606,114 @@ static irqreturn_t pasemi_mac_tx_intr(int irq, void *data) 
	return IRQ_HANDLED;

}



static void pasemi_adjust_link(struct net_device *dev)

{

	struct pasemi_mac *mac = netdev_priv(dev);

	int msg;

	unsigned int flags;

	unsigned int new_flags;



	if (!mac->phydev->link) {

		/* If no link, MAC speed settings don't matter. Just report

		 * link down and return.

		 */

		if (mac->link && netif_msg_link(mac))

			printk(KERN_INFO "%s: Link is down.\n", dev->name);



		netif_carrier_off(dev);

		mac->link = 0;



		return;

	} else

		netif_carrier_on(dev);



	pci_read_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, &flags);

	new_flags = flags & ~(PAS_MAC_CFG_PCFG_HD | PAS_MAC_CFG_PCFG_SPD_M |

			      PAS_MAC_CFG_PCFG_TSR_M);



	if (!mac->phydev->duplex)

		new_flags |= PAS_MAC_CFG_PCFG_HD;



	switch (mac->phydev->speed) {

	case 1000:

		new_flags |= PAS_MAC_CFG_PCFG_SPD_1G |

			     PAS_MAC_CFG_PCFG_TSR_1G;

		break;

	case 100:

		new_flags |= PAS_MAC_CFG_PCFG_SPD_100M |

			     PAS_MAC_CFG_PCFG_TSR_100M;

		break;

	case 10:

		new_flags |= PAS_MAC_CFG_PCFG_SPD_10M |

			     PAS_MAC_CFG_PCFG_TSR_10M;

		break;

	default:

		printk("Unsupported speed %d\n", mac->phydev->speed);

	}



	/* Print on link or speed/duplex change */

	msg = mac->link != mac->phydev->link || flags != new_flags;



	mac->duplex = mac->phydev->duplex;

	mac->speed = mac->phydev->speed;

	mac->link = mac->phydev->link;



	if (new_flags != flags)

		pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, new_flags);



	if (msg && netif_msg_link(mac))

		printk(KERN_INFO "%s: Link is up at %d Mbps, %s duplex.\n",

		       dev->name, mac->speed, mac->duplex ? "full" : "half");

}



static int pasemi_mac_phy_init(struct net_device *dev)

{

	struct pasemi_mac *mac = netdev_priv(dev);

	struct device_node *dn, *phy_dn;

	struct phy_device *phydev;

	unsigned int phy_id;

	const phandle *ph;

	const unsigned int *prop;

	struct resource r;

	int ret;



	dn = pci_device_to_OF_node(mac->pdev);

	ph = get_property(dn, "phy-handle", NULL);

	if (!ph)

		return -ENODEV;

	phy_dn = of_find_node_by_phandle(*ph);



	prop = get_property(phy_dn, "reg", NULL);

	ret = of_address_to_resource(phy_dn->parent, 0, &r);

	if (ret)

		goto err;



	phy_id = *prop;

	snprintf(mac->phy_id, BUS_ID_SIZE, PHY_ID_FMT, (int)r.start, phy_id);



	of_node_put(phy_dn);



	mac->link = 0;

	mac->speed = 0;

	mac->duplex = -1;



	phydev = phy_connect(dev, mac->phy_id, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII);



	if (IS_ERR(phydev)) {

		printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);

		return PTR_ERR(phydev);

	}



	mac->phydev = phydev;



	return 0;



err:

	of_node_put(phy_dn);

	return -ENODEV;

}





static int pasemi_mac_open(struct net_device *dev)

{

	struct pasemi_mac *mac = netdev_priv(dev);
@@ -678,6 +786,13 @@ static int pasemi_mac_open(struct net_device *dev) 


	pasemi_mac_replenish_rx_ring(dev);



	ret = pasemi_mac_phy_init(dev);

	/* Some configs don't have PHYs (XAUI etc), so don't complain about

	 * failed init due to -ENODEV.

	 */

	if (ret && ret != -ENODEV)

		dev_warn(&mac->pdev->dev, "phy init failed: %d\n", ret);



	netif_start_queue(dev);

	netif_poll_enable(dev);
@@ -708,6 +823,9 @@ static int pasemi_mac_open(struct net_device *dev) 
		goto out_rx_int;

	}



	if (mac->phydev)

		phy_start(mac->phydev);



	return 0;



out_rx_int:
@@ -731,6 +849,11 @@ static int pasemi_mac_close(struct net_device *dev) 
	unsigned int stat;

	int retries;



	if (mac->phydev) {

		phy_stop(mac->phydev);

		phy_disconnect(mac->phydev);

	}



	netif_stop_queue(dev);



	/* Clean out any pending buffers */
@@ -1028,6 +1151,9 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 


	mac->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);



	/* Enable most messages by default */

	mac->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;



	err = register_netdev(dev);



	if (err) {

drivers/net/pasemi_mac.h

+6 −0
Original line number Diff line number Diff line
@@ -24,6 +24,7 @@ 
#include <linux/ethtool.h>

#include <linux/netdevice.h>

#include <linux/spinlock.h>

#include <linux/phy.h>



struct pasemi_mac_txring {

	spinlock_t	 lock;
@@ -54,6 +55,7 @@ struct pasemi_mac { 
	struct pci_dev *pdev;

	struct pci_dev *dma_pdev;

	struct pci_dev *iob_pdev;

	struct phy_device *phydev;

	struct net_device_stats stats;



	/* Pointer to the cacheable per-channel status registers */
@@ -75,8 +77,12 @@ struct pasemi_mac { 
	struct pasemi_mac_rxring *rx;

	unsigned long	tx_irq;

	unsigned long	rx_irq;

	int	link;

	int	speed;

	int	duplex;



	unsigned int	msg_enable;

	char	phy_id[BUS_ID_SIZE];

};



/* Software status descriptor (desc_info) */