Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b5e8905b authored by Tony Lindgren's avatar Tony Lindgren
Browse files

omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c 



Move omap2 FS USB platform init code into mach-omap2/usb-fs.c. This will
allow further work later on to use omap hwmod for initializing the
device.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent dba638d2

arch/arm/mach-omap2/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -149,6 +149,8 @@ obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o 
obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \

					   hsmmc.o

# Platform specific device init code

usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o

obj-y					+= $(usbfs-m) $(usbfs-y)

obj-y					+= usb-musb.o

obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o

obj-y					+= usb-ehci.o

arch/arm/mach-omap2/board-2430sdp.c

+1 −1
Original line number Diff line number Diff line
@@ -226,7 +226,7 @@ static void __init omap_2430sdp_init(void) 
	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));

	omap_serial_init();

	omap2_hsmmc_init(mmc);

	omap_usb_init(&sdp2430_usb_config);

	omap2_usbfs_init(&sdp2430_usb_config);

	usb_musb_init(&musb_board_data);

	board_smc91x_init();

arch/arm/mach-omap2/board-apollon.c

+1 −1
Original line number Diff line number Diff line
@@ -306,7 +306,7 @@ static void __init apollon_usb_init(void) 
	omap_cfg_reg(P21_242X_GPIO12);

	gpio_request(12, "USB suspend");

	gpio_direction_output(12, 0);

	omap_usb_init(&apollon_usb_config);

	omap2_usbfs_init(&apollon_usb_config);

}



static void __init omap_apollon_init(void)

arch/arm/mach-omap2/board-h4.c

+1 −1
Original line number Diff line number Diff line
@@ -362,7 +362,7 @@ static void __init omap_h4_init(void) 
			ARRAY_SIZE(h4_i2c_board_info));



	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));

	omap_usb_init(&h4_usb_config);

	omap2_usbfs_init(&h4_usb_config);

	omap_serial_init();

}

arch/arm/mach-omap2/usb-fs.c

0 → 100644
+345 −0
Original line number Diff line number Diff line 
/*

 * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx

 *

 * Copyright (C) 2004 Texas Instruments, Inc.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 */



#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/types.h>

#include <linux/errno.h>

#include <linux/init.h>

#include <linux/platform_device.h>



#include <asm/irq.h>



#include <plat/control.h>

#include <plat/mux.h>

#include <plat/usb.h>

#include <plat/board.h>



#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN

#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO

#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO

#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN

#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG



#if defined(CONFIG_ARCH_OMAP2)



#ifdef	CONFIG_USB_GADGET_OMAP



static struct resource udc_resources[] = {

	/* order is significant! */

	{		/* registers */

		.start		= UDC_BASE,

		.end		= UDC_BASE + 0xff,

		.flags		= IORESOURCE_MEM,

	}, {		/* general IRQ */

		.start		= INT_USB_IRQ_GEN,

		.flags		= IORESOURCE_IRQ,

	}, {		/* PIO IRQ */

		.start		= INT_USB_IRQ_NISO,

		.flags		= IORESOURCE_IRQ,

	}, {		/* SOF IRQ */

		.start		= INT_USB_IRQ_ISO,

		.flags		= IORESOURCE_IRQ,

	},

};



static u64 udc_dmamask = ~(u32)0;



static struct platform_device udc_device = {

	.name		= "omap_udc",

	.id		= -1,

	.dev = {

		.dma_mask		= &udc_dmamask,

		.coherent_dma_mask	= 0xffffffff,

	},

	.num_resources	= ARRAY_SIZE(udc_resources),

	.resource	= udc_resources,

};



static inline void udc_device_init(struct omap_usb_config *pdata)

{

	pdata->udc_device = &udc_device;

}



#else



static inline void udc_device_init(struct omap_usb_config *pdata)

{

}



#endif



#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)



/* The dmamask must be set for OHCI to work */

static u64 ohci_dmamask = ~(u32)0;



static struct resource ohci_resources[] = {

	{

		.start	= OMAP_OHCI_BASE,

		.end	= OMAP_OHCI_BASE + 0xff,

		.flags	= IORESOURCE_MEM,

	},

	{

		.start	= INT_USB_IRQ_HGEN,

		.flags	= IORESOURCE_IRQ,

	},

};



static struct platform_device ohci_device = {

	.name			= "ohci",

	.id			= -1,

	.dev = {

		.dma_mask		= &ohci_dmamask,

		.coherent_dma_mask	= 0xffffffff,

	},

	.num_resources	= ARRAY_SIZE(ohci_resources),

	.resource		= ohci_resources,

};



static inline void ohci_device_init(struct omap_usb_config *pdata)

{

	pdata->ohci_device = &ohci_device;

}



#else



static inline void ohci_device_init(struct omap_usb_config *pdata)

{

}



#endif



#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)



static struct resource otg_resources[] = {

	/* order is significant! */

	{

		.start		= OTG_BASE,

		.end		= OTG_BASE + 0xff,

		.flags		= IORESOURCE_MEM,

	}, {

		.start		= INT_USB_IRQ_OTG,

		.flags		= IORESOURCE_IRQ,

	},

};



static struct platform_device otg_device = {

	.name		= "omap_otg",

	.id		= -1,

	.num_resources	= ARRAY_SIZE(otg_resources),

	.resource	= otg_resources,

};



static inline void otg_device_init(struct omap_usb_config *pdata)

{

	pdata->otg_device = &otg_device;

}



#else



static inline void otg_device_init(struct omap_usb_config *pdata)

{

}



#endif



static void omap2_usb_devconf_clear(u8 port, u32 mask)

{

	u32 r;



	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);

	r &= ~USBTXWRMODEI(port, mask);

	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);

}



static void omap2_usb_devconf_set(u8 port, u32 mask)

{

	u32 r;



	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);

	r |= USBTXWRMODEI(port, mask);

	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);

}



static void omap2_usb2_disable_5pinbitll(void)

{

	u32 r;



	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);

	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);

	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);

}



static void omap2_usb2_enable_5pinunitll(void)

{

	u32 r;



	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);

	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;

	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);

}



static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)

{

	u32	syscon1 = 0;



	omap2_usb_devconf_clear(0, USB_BIDIR_TLL);



	if (nwires == 0)

		return 0;



	if (is_device)

		omap_cfg_reg(J20_24XX_USB0_PUEN);



	omap_cfg_reg(K18_24XX_USB0_DAT);

	omap_cfg_reg(K19_24XX_USB0_TXEN);

	omap_cfg_reg(J14_24XX_USB0_SE0);

	if (nwires != 3)

		omap_cfg_reg(J18_24XX_USB0_RCV);



	switch (nwires) {

	case 3:

		syscon1 = 2;

		omap2_usb_devconf_set(0, USB_BIDIR);

		break;

	case 4:

		syscon1 = 1;

		omap2_usb_devconf_set(0, USB_BIDIR);

		break;

	case 6:

		syscon1 = 3;

		omap_cfg_reg(J19_24XX_USB0_VP);

		omap_cfg_reg(K20_24XX_USB0_VM);

		omap2_usb_devconf_set(0, USB_UNIDIR);

		break;

	default:

		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",

			0, nwires);

	}



	return syscon1 << 16;

}



static u32 __init omap2_usb1_init(unsigned nwires)

{

	u32	syscon1 = 0;



	omap2_usb_devconf_clear(1, USB_BIDIR_TLL);



	if (nwires == 0)

		return 0;



	/* NOTE:  board-specific code must set up pin muxing for usb1,

	 * since each signal could come out on either of two balls.

	 */



	switch (nwires) {

	case 2:

		/* NOTE: board-specific code must override this setting if

		 * this TLL link is not using DP/DM

		 */

		syscon1 = 1;

		omap2_usb_devconf_set(1, USB_BIDIR_TLL);

		break;

	case 3:

		syscon1 = 2;

		omap2_usb_devconf_set(1, USB_BIDIR);

		break;

	case 4:

		syscon1 = 1;

		omap2_usb_devconf_set(1, USB_BIDIR);

		break;

	case 6:

	default:

		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",

			1, nwires);

	}



	return syscon1 << 20;

}



static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)

{

	u32	syscon1 = 0;



	omap2_usb2_disable_5pinbitll();

	alt_pingroup = 0;



	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */

	if (alt_pingroup || nwires == 0)

		return 0;



	omap_cfg_reg(Y11_24XX_USB2_DAT);

	omap_cfg_reg(AA10_24XX_USB2_SE0);

	if (nwires > 2)

		omap_cfg_reg(AA12_24XX_USB2_TXEN);

	if (nwires > 3)

		omap_cfg_reg(AA6_24XX_USB2_RCV);



	switch (nwires) {

	case 2:

		/* NOTE: board-specific code must override this setting if

		 * this TLL link is not using DP/DM

		 */

		syscon1 = 1;

		omap2_usb_devconf_set(2, USB_BIDIR_TLL);

		break;

	case 3:

		syscon1 = 2;

		omap2_usb_devconf_set(2, USB_BIDIR);

		break;

	case 4:

		syscon1 = 1;

		omap2_usb_devconf_set(2, USB_BIDIR);

		break;

	case 5:

		omap_cfg_reg(AA4_24XX_USB2_TLLSE0);

		/* NOTE: board-specific code must override this setting if

		 * this TLL link is not using DP/DM.  Something must also

		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}

		 */

		syscon1 = 3;

		omap2_usb2_enable_5pinunitll();

		break;

	case 6:

	default:

		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",

			2, nwires);

	}



	return syscon1 << 24;

}



void __init omap2_usbfs_init(struct omap_usb_config *pdata)

{

	if (!cpu_is_omap24xx())

		return;



	pdata->usb0_init = omap2_usb0_init;

	pdata->usb1_init = omap2_usb1_init;

	pdata->usb2_init = omap2_usb2_init;

	udc_device_init(pdata);

	ohci_device_init(pdata);

	otg_device_init(pdata);

	omap_otg_init(pdata);

}



#endif