Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ae83e255 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge master.kernel.org:/home/rmk/linux-2.6-mmc 

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups
parents 890f7429 2c171bf1

drivers/mmc/au1xmmc.c

+3 −3
Original line number Diff line number Diff line
@@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) 
		}

		else

			data->bytes_xfered =

				(data->blocks * (1 << data->blksz_bits)) -

				(data->blocks * data->blksz) -

				host->pio.len;

	}
@@ -575,7 +575,7 @@ static int 
au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)

{



	int datalen = data->blocks * (1 << data->blksz_bits);

	int datalen = data->blocks * data->blksz;



	if (dma != 0)

		host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) 
	if (host->dma.len == 0)

		return MMC_ERR_TIMEOUT;



	au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));

	au_writel(data->blksz - 1, HOST_BLKSIZE(host));



	if (host->flags & HOST_F_DMA) {

		int i;

drivers/mmc/imxmmc.c

+14 −10
Original line number Diff line number Diff line
@@ -218,6 +218,8 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host, 
	if(!loops)

		return 0;



	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */

	if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))

		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",

			loops, where, *pstat, stat_mask);

	return loops;
@@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, 
	WARN_ON(host->cmd != NULL);

	host->cmd = cmd;



	/* Ensure, that clock are stopped else command programming and start fails */

	imxmci_stop_clock(host);



	if (cmd->flags & MMC_RSP_BUSY)

		cmdat |= CMD_DAT_CONT_BUSY;
@@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) 
	int trans_done = 0;

	unsigned int stat = *pstat;



	if(host->actual_bus_width == MMC_BUS_WIDTH_4)

	if(host->actual_bus_width != MMC_BUS_WIDTH_4)

		burst_len = 16;

	else

		burst_len = 64;
@@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) 
			stat = MMC_STATUS;



			/* Flush extra bytes from FIFO */

			while(flush_len >= 2){

				flush_len -= 2;

			while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){

				i = MMC_BUFFER_ACCESS;

				stat = MMC_STATUS;

				stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data) 
			data_dir_mask = STATUS_DATA_TRANS_DONE;

		}



		imxmci_busy_wait_for_status(host, &stat,

				data_dir_mask,

				50, "imxmci_tasklet_fnc data");



		if(stat & data_dir_mask) {

			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);

			imxmci_data_done(host, stat);
@@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 


		imxmci_stop_clock(host);

		MMC_CLK_RATE = (prescaler<<3) | clk;

		imxmci_start_clock(host);

		/*

		 * Under my understanding, clock should not be started there, because it would

		 * initiate SDHC sequencer and send last or random command into card

		 */

		/*imxmci_start_clock(host);*/



		dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);

	} else {

drivers/mmc/mmc.c

+1 −0
Original line number Diff line number Diff line
@@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host) 
		data.timeout_ns = card->csd.tacc_ns * 10;

		data.timeout_clks = card->csd.tacc_clks * 10;

		data.blksz_bits = 3;

		data.blksz = 1 << 3;

		data.blocks = 1;

		data.flags = MMC_DATA_READ;

		data.sg = &sg;

drivers/mmc/mmc_block.c

+1 −0
Original line number Diff line number Diff line
@@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) 
		brq.data.timeout_ns = card->csd.tacc_ns * 10;

		brq.data.timeout_clks = card->csd.tacc_clks * 10;

		brq.data.blksz_bits = md->block_bits;

		brq.data.blksz = 1 << md->block_bits;

		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);

		brq.stop.opcode = MMC_STOP_TRANSMISSION;

		brq.stop.arg = 0;

drivers/mmc/pxamci.c

+2 −2
Original line number Diff line number Diff line
@@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) 
		nob = 0xffff;



	writel(nob, host->base + MMC_NOB);

	writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);

	writel(data->blksz, host->base + MMC_BLKLEN);



	clks = (unsigned long long)data->timeout_ns * CLOCKRATE;

	do_div(clks, 1000000000UL);
@@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) 
	 * data blocks as being in error.

	 */

	if (data->error == MMC_ERR_NONE)

		data->bytes_xfered = data->blocks << data->blksz_bits;

		data->bytes_xfered = data->blocks * data->blksz;

	else

		data->bytes_xfered = 0;