ALSA: sscape: convert to firmware loader framework (acd47100) · Commits · e / devices / android_kernel_teracube_emerald

Documentation/sound/alsa/ALSA-Configuration.txt

+4 −4

Original line number	Diff line number	Diff line
		@@ -1631,7 +1631,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
		Module snd-sscape
		-----------------

		Module for ENSONIQ SoundScape PnP cards.
		Module for ENSONIQ SoundScape cards.

		port - Port # (PnP setup)
		wss_port - WSS Port # (PnP setup)
		@@ -1640,9 +1640,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
		dma - DMA # (PnP setup)
		dma2 - 2nd DMA # (PnP setup, -1 to disable)

		This module supports multiple cards. ISA PnP must be enabled.
		You need sscape_ctl tool in alsa-tools package for loading
		the microcode.
		This module supports multiple cards.

		The driver requires the firmware loader support on kernel.

		Module snd-sun-amd7930 (on sparc only)
		--------------------------------------

include/sound/sscape_ioctl.h

deleted100644 → 0

+0 −21

Original line number	Diff line number	Diff line
		#ifndef SSCAPE_IOCTL_H
		#define SSCAPE_IOCTL_H


		struct sscape_bootblock
		{
		unsigned char code[256];
		unsigned version;
		};

		#define SSCAPE_MICROCODE_SIZE 65536

		struct sscape_microcode
		{
		unsigned char __user *code;
		};

		#define SND_SSCAPE_LOAD_BOOTB _IOWR('P', 100, struct sscape_bootblock)
		#define SND_SSCAPE_LOAD_MCODE _IOW ('P', 101, struct sscape_microcode)

		#endif

sound/isa/Kconfig

+6 −2

Original line number	Diff line number	Diff line
		@@ -372,9 +372,9 @@ config SND_SGALAXY

		config SND_SSCAPE
		tristate "Ensoniq SoundScape driver"
		select SND_HWDEP
		select SND_MPU401_UART
		select SND_WSS_LIB
		select FW_LOADER
		help
		Say Y here to include support for Ensoniq SoundScape
		and Ensoniq OEM soundcards.
		@@ -382,7 +382,11 @@ config SND_SSCAPE
		The PCM audio is supported on SoundScape Classic, Elite, PnP
		and VIVO cards. The supported OEM cards are SPEA Media FX and
		Reveal SC-600.
		The MIDI support is very experimental.
		The MIDI support is very experimental and requires binary
		firmware files called "scope.cod" and "sndscape.co?" where the
		? is digit 0, 1, 2, 3 or 4. The firmware files can be found
		in DOS or Windows driver packages. One has to put the firmware
		files into the /lib/firmware directory.

		To compile this driver as a module, choose M here: the module
		will be called snd-sscape.

sound/isa/sscape.c

+106 −222

Original line number	Diff line number	Diff line
		/*
		* Low-level ALSA driver for the ENSONIQ SoundScape PnP
		* Low-level ALSA driver for the ENSONIQ SoundScape
		* Copyright (c) by Chris Rankin
		*
		* This driver was written in part using information obtained from
		@@ -25,22 +25,26 @@
		#include <linux/err.h>
		#include <linux/isa.h>
		#include <linux/delay.h>
		#include <linux/firmware.h>
		#include <linux/pnp.h>
		#include <linux/spinlock.h>
		#include <linux/moduleparam.h>
		#include <asm/dma.h>
		#include <sound/core.h>
		#include <sound/hwdep.h>
		#include <sound/wss.h>
		#include <sound/mpu401.h>
		#include <sound/initval.h>

		#include <sound/sscape_ioctl.h>


		MODULE_AUTHOR("Chris Rankin");
		MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver");
		MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
		MODULE_LICENSE("GPL");
		MODULE_FIRMWARE("sndscape.co0");
		MODULE_FIRMWARE("sndscape.co1");
		MODULE_FIRMWARE("sndscape.co2");
		MODULE_FIRMWARE("sndscape.co3");
		MODULE_FIRMWARE("sndscape.co4");
		MODULE_FIRMWARE("scope.cod");

		static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX;
		static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR;
		@@ -142,14 +146,12 @@ struct soundscape {
		struct resource *wss_res;
		struct snd_wss *chip;
		struct snd_mpu401 *mpu;
		struct snd_hwdep *hw;

		/*
		* The MIDI device won't work until we've loaded
		* its firmware via a hardware-dependent device IOCTL
		*/
		spinlock_t fwlock;
		int hw_in_use;
		unsigned long midi_usage;
		unsigned char midi_vol;
		};
		@@ -167,12 +169,6 @@ static inline struct soundscape get_mpu401_soundscape(struct snd_mpu401 mpu)
		return (struct soundscape *) (mpu->private_data);
		}

		static inline struct soundscape get_hwdep_soundscape(struct snd_hwdep hw)
		{
		return (struct soundscape *) (hw->private_data);
		}


		/*
		* Allocates some kernel memory that we can use for DMA.
		* I think this means that the memory has to map to
		@@ -393,12 +389,12 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)

		do {
		unsigned long flags;
		unsigned char x;
		int x;

		spin_lock_irqsave(&s->lock, flags);
		x = inb(HOST_DATA_IO(s->io_base));
		x = host_read_unsafe(s->io_base);
		spin_unlock_irqrestore(&s->lock, flags);
		if ((x & 0xfe) == 0xfe)
		if (x == 0xfe \|\| x == 0xff)
		return 1;

		msleep(10);
		@@ -420,10 +416,10 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout)

		do {
		unsigned long flags;
		unsigned char x;
		int x;

		spin_lock_irqsave(&s->lock, flags);
		x = inb(HOST_DATA_IO(s->io_base));
		x = host_read_unsafe(s->io_base);
		spin_unlock_irqrestore(&s->lock, flags);
		if (x == 0xfe)
		return 1;
		@@ -438,14 +434,14 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout)
		* Upload a byte-stream into the SoundScape using DMA channel A.
		*/
		static int upload_dma_data(struct soundscape *s,
		const unsigned char __user *data,
		const unsigned char *data,
		size_t size)
		{
		unsigned long flags;
		struct snd_dma_buffer dma;
		int ret;

		if (!get_dmabuf(&dma, PAGE_ALIGN(size)))
		if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024)))
		return -ENOMEM;

		spin_lock_irqsave(&s->lock, flags);
		@@ -458,7 +454,6 @@ static int upload_dma_data(struct soundscape *s,
		/*
		* Enable the DMA channels and configure them ...
		*/
		sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50);
		sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) \| DMA_8BIT);
		sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);

		@@ -468,35 +463,17 @@ static int upload_dma_data(struct soundscape *s,
		sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) \| 0x80);

		/*
		* Upload the user's data (firmware?) to the SoundScape
		* Upload the firmware to the SoundScape
		* board through the DMA channel ...
		*/
		while (size != 0) {
		unsigned long len;

		/*
		* Apparently, copying to/from userspace can sleep.
		* We are therefore forbidden from holding any
		* spinlocks while we copy ...
		*/
		spin_unlock_irqrestore(&s->lock, flags);

		/*
		* Remember that the data that we want to DMA
		* comes from USERSPACE. We have already verified
		* the userspace pointer ...
		*/
		len = min(size, dma.bytes);
		len -= __copy_from_user(dma.area, data, len);
		memcpy(dma.area, data, len);
		data += len;
		size -= len;

		/*
		* Grab that spinlock again, now that we've
		* finished copying!
		*/
		spin_lock_irqsave(&s->lock, flags);

		snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
		sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
		if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
		@@ -512,6 +489,7 @@ static int upload_dma_data(struct soundscape *s,
		} /* while */

		set_host_mode_unsafe(s->io_base);
		outb(0x0, s->io_base);

		/*
		* Boot the board ... (I think)
		@@ -537,7 +515,7 @@ static int upload_dma_data(struct soundscape *s,
		/*
		* NOTE!!! We are NOT holding any spinlocks at this point !!!
		*/
		sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40));
		sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
		free_dmabuf(&dma);

		return ret;
		@@ -547,162 +525,69 @@ static int upload_dma_data(struct soundscape *s,
		* Upload the bootblock(?) into the SoundScape. The only
		* purpose of this block of code seems to be to tell
		* us which version of the microcode we should be using.
		*
		* NOTE: The boot-block data resides in USER-SPACE!!!
		* However, we have already verified its memory
		* addresses by the time we get here.
		*/
		static int sscape_upload_bootblock(struct soundscape sscape, struct sscape_bootblock __user bb)
		static int sscape_upload_bootblock(struct snd_card *card)
		{
		struct soundscape *sscape = get_card_soundscape(card);
		unsigned long flags;
		const struct firmware *init_fw = NULL;
		int data = 0;
		int ret;

		ret = upload_dma_data(sscape, bb->code, sizeof(bb->code));

		spin_lock_irqsave(&sscape->lock, flags);
		if (ret == 0) {
		data = host_read_ctrl_unsafe(sscape->io_base, 100);
		}
		set_midi_mode_unsafe(sscape->io_base);
		spin_unlock_irqrestore(&sscape->lock, flags);

		if (ret == 0) {
		if (data < 0) {
		snd_printk(KERN_ERR "sscape: timeout reading firmware version\n");
		ret = -EAGAIN;
		}
		else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) {
		ret = -EFAULT;
		}
		}

		ret = request_firmware(&init_fw, "scope.cod", card->dev);
		if (ret < 0) {
		snd_printk(KERN_ERR "Error loading scope.cod");
		return ret;
		}
		ret = upload_dma_data(sscape, init_fw->data, init_fw->size);

		/*
		* Upload the microcode into the SoundScape. The
		* microcode is 64K of data, and if we try to copy
		* it into a local variable then we will SMASH THE
		* KERNEL'S STACK! We therefore leave it in USER
		* SPACE, and save ourselves from copying it at all.
		*/
		static int sscape_upload_microcode(struct soundscape *sscape,
		const struct sscape_microcode __user *mc)
		{
		unsigned long flags;
		char __user *code;
		int err;
		release_firmware(init_fw);

		/*
		* We are going to have to copy this data into a special
		* DMA-able buffer before we can upload it. We shall therefore
		* just check that the data pointer is valid for now.
		*
		* NOTE: This buffer is 64K long! That's WAY too big to
		* copy into a stack-temporary anyway.
		*/
		if ( get_user(code, &mc->code) \|\|
		!access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) )
		return -EFAULT;
		spin_lock_irqsave(&sscape->lock, flags);
		if (ret == 0)
		data = host_read_ctrl_unsafe(sscape->io_base, 100);

		if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) {
		snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n");
		}
		if (data & 0x10)
		sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);

		spin_lock_irqsave(&sscape->lock, flags);
		set_midi_mode_unsafe(sscape->io_base);
		spin_unlock_irqrestore(&sscape->lock, flags);

		initialise_mpu401(sscape->mpu);
		data &= 0xf;
		if (ret == 0 && data > 7) {
		snd_printk(KERN_ERR "timeout reading firmware version\n");
		ret = -EAGAIN;
		}

		return err;
		return (ret == 0) ? data : ret;
		}

		/*
		* Hardware-specific device functions, to implement special
		* IOCTLs for the SoundScape card. This is how we upload
		* the microcode into the card, for example, and so we
		* must ensure that no two processes can open this device
		* simultaneously, and that we can't open it at all if
		* someone is using the MIDI device.
		* Upload the microcode into the SoundScape.
		*/
		static int sscape_hw_open(struct snd_hwdep * hw, struct file *file)
		static int sscape_upload_microcode(struct snd_card *card, int version)
		{
		register struct soundscape *sscape = get_hwdep_soundscape(hw);
		unsigned long flags;
		struct soundscape *sscape = get_card_soundscape(card);
		const struct firmware *init_fw = NULL;
		char name[14];
		int err;

		spin_lock_irqsave(&sscape->fwlock, flags);

		if ((sscape->midi_usage != 0) \|\| sscape->hw_in_use) {
		err = -EBUSY;
		} else {
		sscape->hw_in_use = 1;
		err = 0;
		}
		snprintf(name, sizeof(name), "sndscape.co%d", version);

		spin_unlock_irqrestore(&sscape->fwlock, flags);
		err = request_firmware(&init_fw, name, card->dev);
		if (err < 0) {
		snd_printk(KERN_ERR "Error loading sndscape.co%d", version);
		return err;
		}
		err = upload_dma_data(sscape, init_fw->data, init_fw->size);
		if (err == 0)
		snd_printk(KERN_INFO "MIDI firmware loaded %d KBs\n",
		init_fw->size >> 10);

		static int sscape_hw_release(struct snd_hwdep * hw, struct file *file)
		{
		register struct soundscape *sscape = get_hwdep_soundscape(hw);
		unsigned long flags;

		spin_lock_irqsave(&sscape->fwlock, flags);
		sscape->hw_in_use = 0;
		spin_unlock_irqrestore(&sscape->fwlock, flags);
		return 0;
		}

		static int sscape_hw_ioctl(struct snd_hwdep * hw, struct file *file,
		unsigned int cmd, unsigned long arg)
		{
		struct soundscape *sscape = get_hwdep_soundscape(hw);
		int err = -EBUSY;

		switch (cmd) {
		case SND_SSCAPE_LOAD_BOOTB:
		{
		register struct sscape_bootblock __user bb = (struct sscape_bootblock __user ) arg;

		/*
		* We are going to have to copy this data into a special
		* DMA-able buffer before we can upload it. We shall therefore
		* just check that the data pointer is valid for now ...
		*/
		if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) )
		return -EFAULT;

		/*
		* Now check that we can write the firmware version number too...
		*/
		if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) )
		return -EFAULT;

		err = sscape_upload_bootblock(sscape, bb);
		}
		break;

		case SND_SSCAPE_LOAD_MCODE:
		{
		register const struct sscape_microcode __user mc = (const struct sscape_microcode __user ) arg;

		err = sscape_upload_microcode(sscape, mc);
		}
		break;

		default:
		err = -EINVAL;
		break;
		} /* switch */
		release_firmware(init_fw);

		return err;
		}


		/*
		* Mixer control for the SoundScape's MIDI device.
		*/
		@@ -920,7 +805,7 @@ static int mpu401_open(struct snd_mpu401 * mpu)

		spin_lock_irqsave(&sscape->fwlock, flags);

		if (sscape->hw_in_use \|\| (sscape->midi_usage == ULONG_MAX)) {
		if (sscape->midi_usage == ULONG_MAX) {
		err = -EBUSY;
		} else {
		++(sscape->midi_usage);
		@@ -1053,13 +938,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
		}
		}

		strcpy(card->driver, "SoundScape");
		strcpy(card->shortname, pcm->name);
		snprintf(card->longname, sizeof(card->longname),
		"%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
		pcm->name, chip->port, chip->irq,
		chip->dma1, chip->dma2);

		sscape->chip = chip;
		}

		@@ -1162,29 +1040,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
		return -ENXIO;
		}

		if (sscape->type != SSCAPE_VIVO) {
		/*
		* Now create the hardware-specific device so that we can
		* load the microcode into the on-board processor.
		* We cannot use the MPU-401 MIDI system until this firmware
		* has been loaded into the card.
		*/
		err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw));
		if (err < 0) {
		printk(KERN_ERR "sscape: Failed to create "
		"firmware device\n");
		goto _release_dma;
		}
		strlcpy(sscape->hw->name, "SoundScape M68K",
		sizeof(sscape->hw->name));
		sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0';
		sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE;
		sscape->hw->ops.open = sscape_hw_open;
		sscape->hw->ops.release = sscape_hw_release;
		sscape->hw->ops.ioctl = sscape_hw_ioctl;
		sscape->hw->private_data = sscape;
		}

		/*
		* Tell the on-board devices where their resources are (I think -
		* I can't be sure without a datasheet ... So many magic values!)
		@@ -1222,9 +1077,22 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
		wss_port[dev], irq[dev]);
		goto _release_dma;
		}
		strcpy(card->driver, "SoundScape");
		strcpy(card->shortname, name);
		snprintf(card->longname, sizeof(card->longname),
		"%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
		name, sscape->chip->port, sscape->chip->irq,
		sscape->chip->dma1, sscape->chip->dma2);

		#define MIDI_DEVNUM 0
		if (sscape->type != SSCAPE_VIVO) {
		err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]);
		err = sscape_upload_bootblock(card);
		if (err >= 0)
		err = sscape_upload_microcode(card, err);

		if (err == 0) {
		err = create_mpu401(card, MIDI_DEVNUM, port[dev],
		mpu_irq[dev]);
		if (err < 0) {
		printk(KERN_ERR "sscape: Failed to create "
		"MPU-401 device at 0x%lx\n",
		@@ -1240,10 +1108,25 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
		/*
		* Initialize mixer
		*/
		spin_lock_irqsave(&sscape->lock, flags);
		sscape->midi_vol = 0;
		host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100);
		host_write_ctrl_unsafe(sscape->io_base, 0, 100);
		host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100);
		host_write_ctrl_unsafe(sscape->io_base,
		CMD_SET_MIDI_VOL, 100);
		host_write_ctrl_unsafe(sscape->io_base,
		sscape->midi_vol, 100);
		host_write_ctrl_unsafe(sscape->io_base,
		CMD_XXX_MIDI_VOL, 100);
		host_write_ctrl_unsafe(sscape->io_base,
		sscape->midi_vol, 100);
		host_write_ctrl_unsafe(sscape->io_base,
		CMD_SET_EXTMIDI, 100);
		host_write_ctrl_unsafe(sscape->io_base,
		0, 100);
		host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);

		set_midi_mode_unsafe(sscape->io_base);
		spin_unlock_irqrestore(&sscape->lock, flags);
		}
		}

		/*
		@@ -1301,11 +1184,12 @@ static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev)
		sscape->type = SSCAPE;

		dma[dev] &= 0x03;
		snd_card_set_dev(card, pdev);

		ret = create_sscape(dev, card);
		if (ret < 0)
		goto _release_card;

		snd_card_set_dev(card, pdev);
		if ((ret = snd_card_register(card)) < 0) {
		printk(KERN_ERR "sscape: Failed to register sound card\n");
		goto _release_card;
		@@ -1426,12 +1310,12 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard,
		wss_port[idx] = pnp_port_start(dev, 1);
		dma2[idx] = pnp_dma(dev, 1);
		}
		snd_card_set_dev(card, &pcard->card->dev);

		ret = create_sscape(idx, card);
		if (ret < 0)
		goto _release_card;

		snd_card_set_dev(card, &pcard->card->dev);
		if ((ret = snd_card_register(card)) < 0) {
		printk(KERN_ERR "sscape: Failed to register sound card\n");
		goto _release_card;