Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a1829d2b authored Oct 11, 2013 by Jarkko Nikula Committed by Mark Brown Oct 16, 2013

spi: Add missing newline to dev_ prints in drivers



Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

parent 61e6cfa8

drivers/spi/spi-bfin-sport.c

+1 −1

Original line number	Original line	Diff line number	Diff line
	@@ -592,7 +592,7 @@ bfin_sport_spi_setup(struct spi_device *spi)
	*/		*/
	if (chip_info->ctl_reg \|\| chip_info->enable_dma) {		if (chip_info->ctl_reg \|\| chip_info->enable_dma) {
	ret = -EINVAL;		ret = -EINVAL;
	dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields");		dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields\n");
	goto error;		goto error;
	}		}
	chip->cs_chg_udelay = chip_info->cs_chg_udelay;		chip->cs_chg_udelay = chip_info->cs_chg_udelay;

drivers/spi/spi-bfin5xx.c

+2 −2

Original line number	Original line	Diff line number	Diff line
	@@ -524,7 +524,7 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
	timeout = jiffies + HZ;		timeout = jiffies + HZ;
	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))		while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
	if (!time_before(jiffies, timeout)) {		if (!time_before(jiffies, timeout)) {
	dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF");		dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF\n");
	break;		break;
	} else		} else
	cpu_relax();		cpu_relax();
	@@ -1052,7 +1052,7 @@ static int bfin_spi_setup(struct spi_device *spi)
	if (!(spi->mode & SPI_CPHA))		if (!(spi->mode & SPI_CPHA))
	dev_warn(&spi->dev, "Warning: SPI CPHA not set:"		dev_warn(&spi->dev, "Warning: SPI CPHA not set:"
	" Slave Select not under software control!\n"		" Slave Select not under software control!\n"
	" See Documentation/blackfin/bfin-spi-notes.txt");		" See Documentation/blackfin/bfin-spi-notes.txt\n");

	chip->flag = (1 << spi->chip_select) << 8;		chip->flag = (1 << spi->chip_select) << 8;
	} else		} else

drivers/spi/spi-ep93xx.c

+2 −2

Original line number	Original line	Diff line number	Diff line
	@@ -330,7 +330,7 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,

	dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",		dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
	chip->spi->mode, div_cpsr, div_scr, dss);		chip->spi->mode, div_cpsr, div_scr, dss);
	dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0);		dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);

	ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);		ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
	ep93xx_spi_write_u16(espi, SSPCR0, cr0);		ep93xx_spi_write_u16(espi, SSPCR0, cr0);
	@@ -509,7 +509,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
	}		}

	if (WARN_ON(len)) {		if (WARN_ON(len)) {
	dev_warn(&espi->pdev->dev, "len = %zu expected 0!", len);		dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len);
	return ERR_PTR(-EINVAL);		return ERR_PTR(-EINVAL);
	}		}

drivers/spi/spi-fsl-cpm.c

+1 −1

Original line number	Original line	Diff line number	Diff line
	@@ -299,7 +299,7 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)

	switch (mspi->subblock) {		switch (mspi->subblock) {
	default:		default:
	dev_warn(dev, "cell-index unspecified, assuming SPI1");		dev_warn(dev, "cell-index unspecified, assuming SPI1\n");
	/* fall through */		/* fall through */
	case 0:		case 0:
	mspi->subblock = QE_CR_SUBBLOCK_SPI1;		mspi->subblock = QE_CR_SUBBLOCK_SPI1;

drivers/spi/spi-omap2-mcspi.c

+2 −2

Original line number	Original line	Diff line number	Diff line
	@@ -498,7 +498,7 @@ omap2_mcspi_rx_dma(struct spi_device spi, struct spi_transfer xfer,
	((u32 *)xfer->rx_buf)[elements++] = w;		((u32 *)xfer->rx_buf)[elements++] = w;
	} else {		} else {
	int bytes_per_word = mcspi_bytes_per_word(word_len);		int bytes_per_word = mcspi_bytes_per_word(word_len);
	dev_err(&spi->dev, "DMA RX penultimate word empty");		dev_err(&spi->dev, "DMA RX penultimate word empty\n");
	count -= (bytes_per_word << 1);		count -= (bytes_per_word << 1);
	omap2_mcspi_set_enable(spi, 1);		omap2_mcspi_set_enable(spi, 1);
	return count;		return count;
	@@ -516,7 +516,7 @@ omap2_mcspi_rx_dma(struct spi_device spi, struct spi_transfer xfer,
	else /* word_len <= 32 */		else /* word_len <= 32 */
	((u32 *)xfer->rx_buf)[elements] = w;		((u32 *)xfer->rx_buf)[elements] = w;
	} else {		} else {
	dev_err(&spi->dev, "DMA RX last word empty");		dev_err(&spi->dev, "DMA RX last word empty\n");
	count -= mcspi_bytes_per_word(word_len);		count -= mcspi_bytes_per_word(word_len);
	}		}
	omap2_mcspi_set_enable(spi, 1);		omap2_mcspi_set_enable(spi, 1);