Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 9d717271 authored by Johan Hovold's avatar Johan Hovold
Browse files

USB: serial: pl2303: clean up legacy endpoint hack 



Implement the "horrible endpoint hack" for some legacy devices as a
quirk and clean up the code somewhat.

Note that the bulk-endpoint check can be removed as core will already
have verified this.

Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
parent 9fda620a

drivers/usb/serial/pl2303.c

+46 −38
Original line number Diff line number Diff line
@@ -33,9 +33,11 @@ 


#define PL2303_QUIRK_UART_STATE_IDX0		BIT(0)

#define PL2303_QUIRK_LEGACY			BIT(1)

#define PL2303_QUIRK_ENDPOINT_HACK		BIT(2)



static const struct usb_device_id id_table[] = {

	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },

	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID),

		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },

	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },

	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },

	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
@@ -48,7 +50,8 @@ static const struct usb_device_id id_table[] = { 
	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },

	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },

	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },

	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },

	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),

		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },

	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },

	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },

	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
@@ -68,7 +71,8 @@ static const struct usb_device_id id_table[] = { 
		.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },

	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),

		.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },

	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },

	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81),

		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },

	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */

	{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },

	{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
@@ -78,7 +82,8 @@ static const struct usb_device_id id_table[] = { 
	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },

	{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },

	{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },

	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },

	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID),

		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },

	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },

	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },

	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
@@ -218,7 +223,12 @@ static int pl2303_probe(struct usb_serial *serial, 
	return 0;

}



static int pl2303_calc_num_ports(struct usb_serial *serial,

/*

 * Use interrupt endpoint from first interface if available.

 *

 * This is needed due to the looney way its endpoints are set up.

 */

static int pl2303_endpoint_hack(struct usb_serial *serial,

					struct usb_serial_endpoints *epds)

{

	struct usb_interface *interface = serial->interface;
@@ -228,43 +238,41 @@ static int pl2303_calc_num_ports(struct usb_serial *serial, 
	struct usb_endpoint_descriptor *endpoint;

	unsigned int i;



	/* BEGIN HORRIBLE HACK FOR PL2303 */

	/* this is needed due to the looney way its endpoints are set up */

	if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&

	     (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||

	    ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&

	     (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||

	    ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&

	     (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||

	    ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&

	     (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {

		if (interface != dev->actconfig->interface[0]) {

	if (interface == dev->actconfig->interface[0])

		return 0;



	/* check out the endpoints of the other interface */

	iface_desc = dev->actconfig->interface[0]->cur_altsetting;



	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {

		endpoint = &iface_desc->endpoint[i].desc;

				if (usb_endpoint_is_int_in(endpoint)) {

					/* we found a interrupt in endpoint */

					dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");



		if (!usb_endpoint_is_int_in(endpoint))

			continue;



		dev_dbg(ddev, "found interrupt in on separate interface\n");

		if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))

			epds->interrupt_in[epds->num_interrupt_in++] = endpoint;

	}

			}

		}



		/* Now make sure the PL-2303 is configured correctly.

		 * If not, give up now and hope this hack will work

		 * properly during a later invocation of usb_serial_probe

		 */

		if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0) {

			dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n");

			return -ENODEV;

	return 0;

}



static int pl2303_calc_num_ports(struct usb_serial *serial,

					struct usb_serial_endpoints *epds)

{

	unsigned long quirks = (unsigned long)usb_get_serial_data(serial);

	struct device *dev = &serial->interface->dev;

	int ret;



	if (quirks & PL2303_QUIRK_ENDPOINT_HACK) {

		ret = pl2303_endpoint_hack(serial, epds);

		if (ret)

			return ret;

	}

	/* END HORRIBLE HACK FOR PL2303 */



	if (epds->num_interrupt_in < 1) {

		dev_err(ddev, "required interrupt-in endpoint missing\n");

		dev_err(dev, "required interrupt-in endpoint missing\n");

		return -ENODEV;

	}