hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus (9d2ecfb7) · Commits · e / devices / android_kernel_teracube_emerald

MAINTAINERS

+11 −0

Original line number	Original line	Diff line number	Diff line
	@@ -4968,6 +4968,17 @@ F: drivers/i2c/busses/i2c-puv3.c
	F: drivers/video/fb-puv3.c		F: drivers/video/fb-puv3.c
	F: drivers/rtc/rtc-puv3.c		F: drivers/rtc/rtc-puv3.c

			PMBUS HARDWARE MONITORING DRIVERS
			M: Guenter Roeck <guenter.roeck@ericsson.com>
			L: lm-sensors@lm-sensors.org
			W: http://www.lm-sensors.org/
			W: http://www.roeck-us.net/linux/drivers/
			T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
			S: Maintained
			F: Documentation/hwmon/pmbus
			F: drivers/hwmon/pmbus/
			F: include/linux/i2c/pmbus.h

	PMC SIERRA MaxRAID DRIVER		PMC SIERRA MaxRAID DRIVER
	M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>		M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
	L: linux-scsi@vger.kernel.org		L: linux-scsi@vger.kernel.org

drivers/hwmon/Kconfig

+1 −86

Original line number	Original line	Diff line number	Diff line
	@@ -841,92 +841,7 @@ config SENSORS_PCF8591
	These devices are hard to detect and rarely found on mainstream		These devices are hard to detect and rarely found on mainstream
	hardware. If unsure, say N.		hardware. If unsure, say N.

	config PMBUS		source drivers/hwmon/pmbus/Kconfig
	tristate "PMBus support"
	depends on I2C && EXPERIMENTAL
	default n
	help
	Say yes here if you want to enable PMBus support.

	This driver can also be built as a module. If so, the module will
	be called pmbus_core.

	if PMBUS

	config SENSORS_PMBUS
	tristate "Generic PMBus devices"
	default n
	help
	If you say yes here you get hardware monitoring support for generic
	PMBus devices, including but not limited to BMR450, BMR451, BMR453,
	BMR454, and LTC2978.

	This driver can also be built as a module. If so, the module will
	be called pmbus.

	config SENSORS_ADM1275
	tristate "Analog Devices ADM1275"
	default n
	help
	If you say yes here you get hardware monitoring support for Analog
	Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.

	This driver can also be built as a module. If so, the module will
	be called adm1275.

	config SENSORS_MAX16064
	tristate "Maxim MAX16064"
	default n
	help
	If you say yes here you get hardware monitoring support for Maxim
	MAX16064.

	This driver can also be built as a module. If so, the module will
	be called max16064.

	config SENSORS_MAX34440
	tristate "Maxim MAX34440/MAX34441"
	default n
	help
	If you say yes here you get hardware monitoring support for Maxim
	MAX34440 and MAX34441.

	This driver can also be built as a module. If so, the module will
	be called max34440.

	config SENSORS_MAX8688
	tristate "Maxim MAX8688"
	default n
	help
	If you say yes here you get hardware monitoring support for Maxim
	MAX8688.

	This driver can also be built as a module. If so, the module will
	be called max8688.

	config SENSORS_UCD9000
	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
	default n
	help
	If you say yes here you get hardware monitoring support for TI
	UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
	Controllers.

	This driver can also be built as a module. If so, the module will
	be called ucd9000.

	config SENSORS_UCD9200
	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
	default n
	help
	If you say yes here you get hardware monitoring support for TI
	UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
	Digital PWM System Controllers.

	This driver can also be built as a module. If so, the module will
	be called ucd9200.

	endif # PMBUS

	config SENSORS_SHT15		config SENSORS_SHT15
	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."		tristate "Sensiron humidity and temperature sensors. SHT15 and compat."

drivers/hwmon/Makefile

+1 −9

Original line number	Original line	Diff line number	Diff line
	@@ -122,15 +122,7 @@ obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
	obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o		obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
	obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o		obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o

	# PMBus drivers		obj-$(CONFIG_PMBUS) += pmbus/
	obj-$(CONFIG_PMBUS) += pmbus_core.o
	obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
	obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
	obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
	obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
	obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
	obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
	obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o

	ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG		ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG

drivers/hwmon/pmbus/Kconfig

0 → 100644

+90 −0

Original line number	Original line	Diff line number	Diff line
			#
			# PMBus chip drivers configuration
			#

			menuconfig PMBUS
			tristate "PMBus support"
			depends on I2C && EXPERIMENTAL
			default n
			help
			Say yes here if you want to enable PMBus support.

			This driver can also be built as a module. If so, the module will
			be called pmbus_core.

			if PMBUS

			config SENSORS_PMBUS
			tristate "Generic PMBus devices"
			default y
			help
			If you say yes here you get hardware monitoring support for generic
			PMBus devices, including but not limited to BMR450, BMR451, BMR453,
			BMR454, and LTC2978.

			This driver can also be built as a module. If so, the module will
			be called pmbus.

			config SENSORS_ADM1275
			tristate "Analog Devices ADM1275"
			default n
			help
			If you say yes here you get hardware monitoring support for Analog
			Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.

			This driver can also be built as a module. If so, the module will
			be called adm1275.

			config SENSORS_MAX16064
			tristate "Maxim MAX16064"
			default n
			help
			If you say yes here you get hardware monitoring support for Maxim
			MAX16064.

			This driver can also be built as a module. If so, the module will
			be called max16064.

			config SENSORS_MAX34440
			tristate "Maxim MAX34440/MAX34441"
			default n
			help
			If you say yes here you get hardware monitoring support for Maxim
			MAX34440 and MAX34441.

			This driver can also be built as a module. If so, the module will
			be called max34440.

			config SENSORS_MAX8688
			tristate "Maxim MAX8688"
			default n
			help
			If you say yes here you get hardware monitoring support for Maxim
			MAX8688.

			This driver can also be built as a module. If so, the module will
			be called max8688.

			config SENSORS_UCD9000
			tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
			default n
			help
			If you say yes here you get hardware monitoring support for TI
			UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
			Controllers.

			This driver can also be built as a module. If so, the module will
			be called ucd9000.

			config SENSORS_UCD9200
			tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
			default n
			help
			If you say yes here you get hardware monitoring support for TI
			UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
			Digital PWM System Controllers.

			This driver can also be built as a module. If so, the module will
			be called ucd9200.

			endif # PMBUS

drivers/hwmon/pmbus/Makefile

0 → 100644

+12 −0

Original line number	Original line	Diff line number	Diff line
			#
			# Makefile for PMBus chip drivers.
			#

			obj-$(CONFIG_PMBUS) += pmbus_core.o
			obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
			obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
			obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
			obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
			obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
			obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
			obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o