diff --git a/.gitignore b/.gitignore index 0c39aa20b6ba8d2afbc69670636b9223b3bf23fa..f6050b88e95b5b59e2c08dbef865d92049956e58 100644 --- a/.gitignore +++ b/.gitignore @@ -7,38 +7,40 @@ # command after changing this file, to see if there are # any tracked files which get ignored after the change. # -# Normal rules +# Normal rules (sorted alphabetically) # .* +*.a +*.bin +*.bz2 +*.c.[012]*.* +*.dtb +*.dtb.S +*.dwo +*.elf +*.gcno +*.gz +*.i +*.ko +*.ll +*.lst +*.lz4 +*.lzma +*.lzo +*.mod.c *.o *.o.* -*.a +*.order +*.patch *.s -*.ko *.so *.so.dbg -*.mod.c -*.i -*.lst +*.su *.symtypes -*.order -*.elf -*.bin *.tar -*.gz -*.bz2 -*.lzma *.xz -*.lz4 -*.lzo -*.patch -*.gcno -*.ll -modules.builtin Module.symvers -*.dwo -*.su -*.c.[012]*.* +modules.builtin # # Top-level generic files @@ -53,6 +55,11 @@ Module.symvers /System.map /Module.markers +# +# RPM spec file (make rpm-pkg) +# +/*.spec + # # Debian directory (make deb-pkg) # diff --git a/.mailmap b/.mailmap index c021f29779a7a1cce57d5c6aa36ee271a745e47a..1469ff0d3f4d55dde07c676e4c4fc29f432d20f3 100644 --- a/.mailmap +++ b/.mailmap @@ -73,6 +73,8 @@ James E Wilson James Hogan James Hogan James Ketrenos +Jason Gunthorpe +Jason Gunthorpe Javi Merino Jean Tourrilhes diff --git a/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads b/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads deleted file mode 100644 index b0b0eeb20fe342907cf2e7f9480a2da038ff3043..0000000000000000000000000000000000000000 --- a/Documentation/ABI/obsolete/proc-sys-vm-nr_pdflush_threads +++ /dev/null @@ -1,5 +0,0 @@ -What: /proc/sys/vm/nr_pdflush_threads -Date: June 2012 -Contact: Wanpeng Li -Description: Since pdflush is replaced by per-BDI flusher, the interface of old pdflush - exported in /proc/sys/vm/ should be removed. diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index 867c1fab20e243f224f68bd2ddeacd4eef7dda4d..32513dc2eec9bdbf36ebc5117ece8f3577621e94 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -11,7 +11,7 @@ Description: Kernel code may export it for complete or partial access. GPIOs are identified as they are inside the kernel, using integers in - the range 0..INT_MAX. See Documentation/gpio.txt for more information. + the range 0..INT_MAX. See Documentation/gpio/gpio.txt for more information. /sys/class/gpio /export ... asks the kernel to export a GPIO to userspace diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus index 5d0125f7bcaf145088359bed69a2ba2cce07fa97..d4077cc60d55ddc6b9b905e6d60dff3b5fd447aa 100644 --- a/Documentation/ABI/stable/sysfs-bus-vmbus +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -41,3 +41,73 @@ KernelVersion: 4.5 Contact: K. Y. Srinivasan Description: The 16 bit vendor ID of the device Users: tools/hv/lsvmbus and user level RDMA libraries + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: VCPU (sub)channel is affinitized to +Users: tools/hv/lsvmbus and other debuggig tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: VCPU (sub)channel is affinitized to +Users: tools/hv/lsvmbus and other debuggig tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Inbound channel signaling state +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/latency +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Channel signaling latency +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Outbound channel signaling state +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/pending +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Channel interrupt pending state +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Bytes availabble to read +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Bytes availabble to write +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/events +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Number of times we have signaled the host +Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Number of times we have taken an interrupt (incoming) +Users: Debugging tools diff --git a/Documentation/ABI/testing/dell-smbios-wmi b/Documentation/ABI/testing/dell-smbios-wmi new file mode 100644 index 0000000000000000000000000000000000000000..fc919ce16008d99c74761406a9351dc275ea0316 --- /dev/null +++ b/Documentation/ABI/testing/dell-smbios-wmi @@ -0,0 +1,41 @@ +What: /dev/wmi/dell-smbios +Date: November 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" +Description: + Perform SMBIOS calls on supported Dell machines. + through the Dell ACPI-WMI interface. + + IOCTL's and buffer formats are defined in: + + + 1) To perform an SMBIOS call from userspace, you'll need to + first determine the minimum size of the calling interface + buffer for your machine. + Platforms that contain larger buffers can return larger + objects from the system firmware. + Commonly this size is either 4k or 32k. + + To determine the size of the buffer read() a u64 dword from + the WMI character device /dev/wmi/dell-smbios. + + 2) After you've determined the minimum size of the calling + interface buffer, you can allocate a structure that represents + the structure documented above. + + 3) In the 'length' object store the size of the buffer you + determined above and allocated. + + 4) In this buffer object, prepare as necessary for the SMBIOS + call you're interested in. Typically SMBIOS buffers have + "class", "select", and "input" defined to values that coincide + with the data you are interested in. + Documenting class/select/input values is outside of the scope + of this documentation. Check with the libsmbios project for + further documentation on these values. + + 6) Run the call by using ioctl() as described in the header. + + 7) The output will be returned in the buffer object. + + 8) Be sure to free up your allocated object. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 7eead5f97e0295b009c56b1d82d13ecf9e6163e6..2e3f919485f49f8a11904614bafb99e74404c51a 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -522,6 +522,7 @@ Description: Specifies the output powerdown mode. DAC output stage is disconnected from the amplifier and 1kohm_to_gnd: connected to ground via an 1kOhm resistor, + 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 90kohm_to_gnd: connected to ground via a 90kOhm resistor, @@ -1242,9 +1243,9 @@ What: /sys/.../iio:deviceX/in_distance_raw KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: - This attribute is used to read the distance covered by the user - since the last reboot while activated. Units after application - of scale are meters. + This attribute is used to read the measured distance to an object + or the distance covered by the user since the last reboot while + activated. Units after application of scale are meters. What: /sys/bus/iio/devices/iio:deviceX/store_eeprom KernelVersion: 3.4.0 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec index 297b9720f024129d50683b0c515cee58672e1d00..0e95c2ca105ca891ebbeab8983b3f0f5461ddaea 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec +++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec @@ -16,3 +16,13 @@ Description: the motion sensor is placed. For example, in a laptop a motion sensor can be located on the base or on the lid. Current valid values are 'base' and 'lid'. + +What: /sys/bus/iio/devices/iio:deviceX/id +Date: Septembre 2017 +KernelVersion: 4.14 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is exposed by the CrOS EC legacy accelerometer + driver and represents the sensor ID as exposed by the EC. This + ID is used by the Android sensor service hardware abstraction + layer (sensor HAL) through the Android container on ChromeOS. diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 392bef5bd3996f71e5d73f934e701f9396afbf71..93798c02e28b28c171c0d00bedd1444c3553ed64 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -110,3 +110,51 @@ Description: When new NVM image is written to the non-active NVM is directly the status value from the DMA configuration based mailbox before the device is power cycled. Writing 0 here clears the status. + +What: /sys/bus/thunderbolt/devices/./key +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains name of the property directory the XDomain + service exposes. This entry describes the protocol in + question. Following directories are already reserved by + the Apple XDomain specification: + + network: IP/ethernet over Thunderbolt + targetdm: Target disk mode protocol over Thunderbolt + extdisp: External display mode protocol over Thunderbolt + +What: /sys/bus/thunderbolt/devices/./modalias +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: Stores the same MODALIAS value emitted by uevent for + the XDomain service. Format: tbtsvc:kSpNvNrN + +What: /sys/bus/thunderbolt/devices/./prtcid +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain protocol identifier the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcvers +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain protocol version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcrevs +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain software version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/./prtcstns +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain service specific settings as + bitmask. Format: %x diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index 676fdf5f2a99af0ee623eeef4b2938c1c1c8924f..80a00f7b666709d7edf3c0296753959dd802bcf9 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -211,7 +211,9 @@ Description: device, after it has been suspended at run time, from a resume request to the moment the device will be ready to process I/O, in microseconds. If it is equal to 0, however, this means that - the PM QoS resume latency may be arbitrary. + the PM QoS resume latency may be arbitrary and the special value + "n/a" means that user space cannot accept any resume latency at + all for the given device. Not all drivers support this attribute. If it isn't supported, it is not present. @@ -258,19 +260,3 @@ Description: This attribute has no effect on system-wide suspend/resume and hibernation. - -What: /sys/devices/.../power/pm_qos_remote_wakeup -Date: September 2012 -Contact: Rafael J. Wysocki -Description: - The /sys/devices/.../power/pm_qos_remote_wakeup attribute - is used for manipulating the PM QoS "remote wakeup required" - flag. If set, this flag indicates to the kernel that the - device is a source of user events that have to be signaled from - its low-power states. - - Not all drivers support this attribute. If it isn't supported, - it is not present. - - This attribute has no effect on system-wide suspend/resume and - hibernation. diff --git a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 new file mode 100644 index 0000000000000000000000000000000000000000..d301e7017afe164cf9140252f0168ee23007d197 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 @@ -0,0 +1,21 @@ +What: /sys/bus/w1/devices/19-/speed +Date: Sep 2017 +KernelVersion: 4.14 +Contact: Jan Kandziora +Description: When written, this file sets the I2C speed on the connected + DS28E17 chip. When read, it reads the current setting from + the DS28E17 chip. + Valid values: 100, 400, 900 [kBaud]. + Default 100, can be set by w1_ds28e17.speed= module parameter. +Users: w1_ds28e17 driver + +What: /sys/bus/w1/devices/19-/stretch +Date: Sep 2017 +KernelVersion: 4.14 +Contact: Jan Kandziora +Description: When written, this file sets the multiplier used to calculate + the busy timeout for I2C operations on the connected DS28E17 + chip. When read, returns the current setting. + Valid values: 1 to 9. + Default 1, can be set by w1_ds28e17.stretch= module parameter. +Users: w1_ds28e17 driver diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 11b7f4ebea7c4b6a04d2ce3894ff1a8d9907e60a..a7799c2fca2855eced4740cb6a82e5f26a448287 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -51,6 +51,18 @@ Description: Controls the dirty page count condition for the in-place-update policies. +What: /sys/fs/f2fs//min_hot_blocks +Date: March 2017 +Contact: "Jaegeuk Kim" +Description: + Controls the dirty page count condition for redefining hot data. + +What: /sys/fs/f2fs//min_ssr_sections +Date: October 2017 +Contact: "Chao Yu" +Description: + Controls the fee section threshold to trigger SSR allocation. + What: /sys/fs/f2fs//max_small_discards Date: November 2013 Contact: "Jaegeuk Kim" @@ -102,6 +114,12 @@ Contact: "Jaegeuk Kim" Description: Controls the idle timing. +What: /sys/fs/f2fs//iostat_enable +Date: August 2017 +Contact: "Chao Yu" +Description: + Controls to enable/disable IO stat. + What: /sys/fs/f2fs//ra_nid_pages Date: October 2015 Contact: "Chao Yu" @@ -122,6 +140,12 @@ Contact: "Shuoran Liu" Description: Shows total written kbytes issued to disk. +What: /sys/fs/f2fs//feature +Date: July 2017 +Contact: "Jaegeuk Kim" +Description: + Shows all enabled features in current device. + What: /sys/fs/f2fs//inject_rate Date: May 2016 Contact: "Sheng Yong" @@ -138,7 +162,18 @@ What: /sys/fs/f2fs//reserved_blocks Date: June 2017 Contact: "Chao Yu" Description: - Controls current reserved blocks in system. + Controls target reserved blocks in system, the threshold + is soft, it could exceed current available user space. + +What: /sys/fs/f2fs//current_reserved_blocks +Date: October 2017 +Contact: "Yunlong Song" +Contact: "Chao Yu" +Description: + Shows current reserved blocks in system, it may be temporarily + smaller than target_reserved_blocks, but will gradually + increase to target_reserved_blocks when more free blocks are + freed by user later. What: /sys/fs/f2fs//gc_urgent Date: August 2017 diff --git a/Documentation/ABI/testing/sysfs-platform-dell-smbios b/Documentation/ABI/testing/sysfs-platform-dell-smbios new file mode 100644 index 0000000000000000000000000000000000000000..205d3b6361e0db9c3c653f56928c6d8609ee000d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dell-smbios @@ -0,0 +1,21 @@ +What: /sys/devices/platform//tokens/* +Date: November 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" +Description: + A read-only description of Dell platform tokens + available on the machine. + + Each token attribute is available as a pair of + sysfs attributes readable by a process with + CAP_SYS_ADMIN. + + For example the token ID "5" would be available + as the following attributes: + + 0005_location + 0005_value + + Tokens will vary from machine to machine, and + only tokens available on that machine will be + displayed. diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt new file mode 100644 index 0000000000000000000000000000000000000000..8af65059d51907de713066d243e73848346bf0e0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt @@ -0,0 +1,11 @@ +What: /sys/devices/platform//force_power +Date: September 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" +Description: + Modify the platform force power state, influencing + Thunderbolt controllers to turn on or off when no + devices are connected (write-only) + There are two available states: + * 0 -> Force power disabled + * 1 -> Force power enabled diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index aa77a25a09400d91bbc45cf5f20152965c5b309a..5ef1047e2e6635b4cf060fa2f927820d917f5dc4 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -81,7 +81,9 @@ If you want the driver to put an event into the event log on a panic, enable the 'Generate a panic event to all BMCs on a panic' option. If you want the whole panic string put into the event log using OEM events, enable the 'Generate OEM events containing the panic string' -option. +option. You can also enable these dynamically by setting the module +parameter named "panic_op" in the ipmi_msghandler module to "event" +or "string". Setting that parameter to "none" disables this function. Basic Design ------------ diff --git a/Documentation/acpi/lpit.txt b/Documentation/acpi/lpit.txt new file mode 100644 index 0000000000000000000000000000000000000000..b426398d2e97109704db0e715f6f1f1572580cfe --- /dev/null +++ b/Documentation/acpi/lpit.txt @@ -0,0 +1,25 @@ +To enumerate platform Low Power Idle states, Intel platforms are using +“Low Power Idle Table” (LPIT). More details about this table can be +downloaded from: +http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf + +Residencies for each low power state can be read via FFH +(Function fixed hardware) or a memory mapped interface. + +On platforms supporting S0ix sleep states, there can be two types of +residencies: +- CPU PKG C10 (Read via FFH interface) +- Platform Controller Hub (PCH) SLP_S0 (Read via memory mapped interface) + +The following attributes are added dynamically to the cpuidle +sysfs attribute group: + /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us + /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us + +The "low_power_idle_cpu_residency_us" attribute shows time spent +by the CPU package in PKG C10 + +The "low_power_idle_system_residency_us" attribute shows SLP_S0 +residency, or system time spent with the SLP_S0# signal asserted. +This is the lowest possible system power state, achieved only when CPU is in +PKG C10 and all functional blocks in PCH are in a low power state. diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst index 12278a926370a136e978feb31c94fa8763e9cdea..fdf72429f8019cd68ab8e7557cdb4c7376e50176 100644 --- a/Documentation/admin-guide/dynamic-debug-howto.rst +++ b/Documentation/admin-guide/dynamic-debug-howto.rst @@ -18,7 +18,7 @@ shortcut for ``print_hex_dump(KERN_DEBUG)``. For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is its ``prefix_str`` argument, if it is constant string; or ``hexdump`` -in case ``prefix_str`` is build dynamically. +in case ``prefix_str`` is built dynamically. Dynamic debug has even more useful features: @@ -197,8 +197,8 @@ line line number matches the callsite line number exactly. A range of line numbers matches any callsite between the first and last line number inclusive. An empty first number means - the first line in the file, an empty line number means the - last number in the file. Examples:: + the first line in the file, an empty last line number means the + last line number in the file. Examples:: line 1603 // exactly line 1603 line 1600-1605 // the six lines from line 1600 to line 1605 diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b74e13312fdc291d55ac29b137cc8df4ee608b5e..62436bd5f34a730b5e0c15e38138970605d9f8c0 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -857,7 +857,7 @@ The filter can be disabled or changed to another driver later using sysfs. - drm_kms_helper.edid_firmware=[:][,[:]] + drm.edid_firmware=[:][,[:]] Broken monitors, graphic adapters, KVMs and EDIDless panels may send no or incorrect EDID data sets. This parameter allows to specify an EDID data sets @@ -1864,13 +1864,6 @@ Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y, the default is off. - kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode - Valid arguments: 0, 1, 2 - kmemcheck=0 (disabled) - kmemcheck=1 (enabled) - kmemcheck=2 (one-shot mode) - Default: 2 (one-shot mode) - kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs. Default is 0 (don't ignore, but inject #GP) @@ -3211,6 +3204,10 @@ allowed (eg kernel_enable_fpu()/kernel_disable_fpu()). There is some performance impact when enabling this. + ppc_tm= [PPC] + Format: {"off"} + Disable Hardware Transactional Memory + print-fatal-signals= [KNL] debug: print fatal signals diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 6a4cd1f159ca7fef15f2fb59ed807a2c9946b439..de50a8561774249351515662404e2a1f8328aba6 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -197,3 +197,42 @@ information is missing. To recover from this mode, one needs to flash a valid NVM image to the host host controller in the same way it is done in the previous chapter. + +Networking over Thunderbolt cable +--------------------------------- +Thunderbolt technology allows software communication across two hosts +connected by a Thunderbolt cable. + +It is possible to tunnel any kind of traffic over Thunderbolt link but +currently we only support Apple ThunderboltIP protocol. + +If the other host is running Windows or macOS only thing you need to +do is to connect Thunderbolt cable between the two hosts, the +``thunderbolt-net`` is loaded automatically. If the other host is also +Linux you should load ``thunderbolt-net`` manually on one host (it does +not matter which one):: + + # modprobe thunderbolt-net + +This triggers module load on the other host automatically. If the driver +is built-in to the kernel image, there is no need to do anything. + +The driver will create one virtual ethernet interface per Thunderbolt +port which are named like ``thunderbolt0`` and so on. From this point +you can either use standard userspace tools like ``ifconfig`` to +configure the interface or let your GUI to handle it automatically. + +Forcing power +------------- +Many OEMs include a method that can be used to force the power of a +thunderbolt controller to an "On" state even if nothing is connected. +If supported by your machine this will be exposed by the WMI bus with +a sysfs attribute called "force_power". + +For example the intel-wmi-thunderbolt driver exposes this attribute in: + /sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power + + To force the power to on, write 1 to this attribute file. + To disable force power, write 0 to this attribute file. + +Note: it's currently not possible to query the force power state of a platform. diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index d7b1f016bd62bb7e06b97e9345d1eb8ac7df1723..f8efc21998bfaded6d534e54074c4d985fc29ea4 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -33,6 +33,11 @@ SunXi family - Next Thing Co GR8 (sun5i) + * Single ARM Cortex-A7 based SoCs + - Allwinner V3s (sun8i) + + Datasheet + http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + * Dual ARM Cortex-A7 based SoCs - Allwinner A20 (sun7i) + User Manual @@ -71,9 +76,11 @@ SunXi family + Datasheet http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf - - Allwinner V3s (sun8i) + - Allwinner R40 (sun8i) + Datasheet - http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf + + User Manual + https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt index dad411d635d88c09c6965f506e9ff27b5cfbc38b..bd9b3faab2c48551b28a90900b93ee13531956ac 100644 --- a/Documentation/arm64/cpu-feature-registers.txt +++ b/Documentation/arm64/cpu-feature-registers.txt @@ -110,10 +110,20 @@ infrastructure: x--------------------------------------------------x | Name | bits | visible | |--------------------------------------------------| - | RES0 | [63-32] | n | + | RES0 | [63-48] | n | + |--------------------------------------------------| + | DP | [47-44] | y | + |--------------------------------------------------| + | SM4 | [43-40] | y | + |--------------------------------------------------| + | SM3 | [39-36] | y | + |--------------------------------------------------| + | SHA3 | [35-32] | y | |--------------------------------------------------| | RDM | [31-28] | y | |--------------------------------------------------| + | RES0 | [27-24] | n | + |--------------------------------------------------| | ATOMICS | [23-20] | y | |--------------------------------------------------| | CRC32 | [19-16] | y | @@ -132,7 +142,11 @@ infrastructure: x--------------------------------------------------x | Name | bits | visible | |--------------------------------------------------| - | RES0 | [63-28] | n | + | RES0 | [63-36] | n | + |--------------------------------------------------| + | SVE | [35-32] | y | + |--------------------------------------------------| + | RES0 | [31-28] | n | |--------------------------------------------------| | GIC | [27-24] | n | |--------------------------------------------------| diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt new file mode 100644 index 0000000000000000000000000000000000000000..89edba12a9e018762f43923c4982fe41840d1657 --- /dev/null +++ b/Documentation/arm64/elf_hwcaps.txt @@ -0,0 +1,160 @@ +ARM64 ELF hwcaps +================ + +This document describes the usage and semantics of the arm64 ELF hwcaps. + + +1. Introduction +--------------- + +Some hardware or software features are only available on some CPU +implementations, and/or with certain kernel configurations, but have no +architected discovery mechanism available to userspace code at EL0. The +kernel exposes the presence of these features to userspace through a set +of flags called hwcaps, exposed in the auxilliary vector. + +Userspace software can test for features by acquiring the AT_HWCAP entry +of the auxilliary vector, and testing whether the relevant flags are +set, e.g. + +bool floating_point_is_present(void) +{ + unsigned long hwcaps = getauxval(AT_HWCAP); + if (hwcaps & HWCAP_FP) + return true; + + return false; +} + +Where software relies on a feature described by a hwcap, it should check +the relevant hwcap flag to verify that the feature is present before +attempting to make use of the feature. + +Features cannot be probed reliably through other means. When a feature +is not available, attempting to use it may result in unpredictable +behaviour, and is not guaranteed to result in any reliable indication +that the feature is unavailable, such as a SIGILL. + + +2. Interpretation of hwcaps +--------------------------- + +The majority of hwcaps are intended to indicate the presence of features +which are described by architected ID registers inaccessible to +userspace code at EL0. These hwcaps are defined in terms of ID register +fields, and should be interpreted with reference to the definition of +these fields in the ARM Architecture Reference Manual (ARM ARM). + +Such hwcaps are described below in the form: + + Functionality implied by idreg.field == val. + +Such hwcaps indicate the availability of functionality that the ARM ARM +defines as being present when idreg.field has value val, but do not +indicate that idreg.field is precisely equal to val, nor do they +indicate the absence of functionality implied by other values of +idreg.field. + +Other hwcaps may indicate the presence of features which cannot be +described by ID registers alone. These may be described without +reference to ID registers, and may refer to other documentation. + + +3. The hwcaps exposed in AT_HWCAP +--------------------------------- + +HWCAP_FP + + Functionality implied by ID_AA64PFR0_EL1.FP == 0b0000. + +HWCAP_ASIMD + + Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0000. + +HWCAP_EVTSTRM + + The generic timer is configured to generate events at a frequency of + approximately 100KHz. + +HWCAP_AES + + Functionality implied by ID_AA64ISAR1_EL1.AES == 0b0001. + +HWCAP_PMULL + + Functionality implied by ID_AA64ISAR1_EL1.AES == 0b0010. + +HWCAP_SHA1 + + Functionality implied by ID_AA64ISAR0_EL1.SHA1 == 0b0001. + +HWCAP_SHA2 + + Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0001. + +HWCAP_CRC32 + + Functionality implied by ID_AA64ISAR0_EL1.CRC32 == 0b0001. + +HWCAP_ATOMICS + + Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0010. + +HWCAP_FPHP + + Functionality implied by ID_AA64PFR0_EL1.FP == 0b0001. + +HWCAP_ASIMDHP + + Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0001. + +HWCAP_CPUID + + EL0 access to certain ID registers is available, to the extent + described by Documentation/arm64/cpu-feature-registers.txt. + + These ID registers may imply the availability of features. + +HWCAP_ASIMDRDM + + Functionality implied by ID_AA64ISAR0_EL1.RDM == 0b0001. + +HWCAP_JSCVT + + Functionality implied by ID_AA64ISAR1_EL1.JSCVT == 0b0001. + +HWCAP_FCMA + + Functionality implied by ID_AA64ISAR1_EL1.FCMA == 0b0001. + +HWCAP_LRCPC + + Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0001. + +HWCAP_DCPOP + + Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0001. + +HWCAP_SHA3 + + Functionality implied by ID_AA64ISAR0_EL1.SHA3 == 0b0001. + +HWCAP_SM3 + + Functionality implied by ID_AA64ISAR0_EL1.SM3 == 0b0001. + +HWCAP_SM4 + + Functionality implied by ID_AA64ISAR0_EL1.SM4 == 0b0001. + +HWCAP_ASIMDDP + + Functionality implied by ID_AA64ISAR0_EL1.DP == 0b0001. + +HWCAP_SHA512 + + Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0002. + +HWCAP_SVE + + Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001. diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt index d7273a5f64566f3acfe009231cab43c05fd1e9a5..671bc0639262b8cfd96e9d1dded569772deb5952 100644 --- a/Documentation/arm64/memory.txt +++ b/Documentation/arm64/memory.txt @@ -86,9 +86,9 @@ Translation table lookup with 64KB pages: +-------------------------------------------------> [63] TTBR0/1 -When using KVM, the hypervisor maps kernel pages in EL2, at a fixed -offset from the kernel VA (top 24bits of the kernel VA set to zero): +When using KVM without the Virtualization Host Extensions, the hypervisor +maps kernel pages in EL2 at a fixed offset from the kernel VA. See the +kern_hyp_va macro for more details. -Start End Size Use ------------------------------------------------------------------------ -0000004000000000 0000007fffffffff 256GB kernel objects mapped in HYP +When using KVM with the Virtualization Host Extensions, no additional +mappings are created, since the host kernel runs directly in EL2. diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt new file mode 100644 index 0000000000000000000000000000000000000000..f128f736b4a5025f6c1964253b05472d6c76dc8b --- /dev/null +++ b/Documentation/arm64/sve.txt @@ -0,0 +1,508 @@ + Scalable Vector Extension support for AArch64 Linux + =================================================== + +Author: Dave Martin +Date: 4 August 2017 + +This document outlines briefly the interface provided to userspace by Linux in +order to support use of the ARM Scalable Vector Extension (SVE). + +This is an outline of the most important features and issues only and not +intended to be exhaustive. + +This document does not aim to describe the SVE architecture or programmer's +model. To aid understanding, a minimal description of relevant programmer's +model features for SVE is included in Appendix A. + + +1. General +----------- + +* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are + tracked per-thread. + +* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector + AT_HWCAP entry. Presence of this flag implies the presence of the SVE + instructions and registers, and the Linux-specific system interfaces + described in this document. SVE is reported in /proc/cpuinfo as "sve". + +* Support for the execution of SVE instructions in userspace can also be + detected by reading the CPU ID register ID_AA64PFR0_EL1 using an MRS + instruction, and checking that the value of the SVE field is nonzero. [3] + + It does not guarantee the presence of the system interfaces described in the + following sections: software that needs to verify that those interfaces are + present must check for HWCAP_SVE instead. + +* Debuggers should restrict themselves to interacting with the target via the + NT_ARM_SVE regset. The recommended way of detecting support for this regset + is to connect to a target process first and then attempt a + ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov). + + +2. Vector length terminology +----------------------------- + +The size of an SVE vector (Z) register is referred to as the "vector length". + +To avoid confusion about the units used to express vector length, the kernel +adopts the following conventions: + +* Vector length (VL) = size of a Z-register in bytes + +* Vector quadwords (VQ) = size of a Z-register in units of 128 bits + +(So, VL = 16 * VQ.) + +The VQ convention is used where the underlying granularity is important, such +as in data structure definitions. In most other situations, the VL convention +is used. This is consistent with the meaning of the "VL" pseudo-register in +the SVE instruction set architecture. + + +3. System call behaviour +------------------------- + +* On syscall, V0..V31 are preserved (as without SVE). Thus, bits [127:0] of + Z0..Z31 are preserved. All other bits of Z0..Z31, and all of P0..P15 and FFR + become unspecified on return from a syscall. + +* The SVE registers are not used to pass arguments to or receive results from + any syscall. + +* In practice the affected registers/bits will be preserved or will be replaced + with zeros on return from a syscall, but userspace should not make + assumptions about this. The kernel behaviour may vary on a case-by-case + basis. + +* All other SVE state of a thread, including the currently configured vector + length, the state of the PR_SVE_VL_INHERIT flag, and the deferred vector + length (if any), is preserved across all syscalls, subject to the specific + exceptions for execve() described in section 6. + + In particular, on return from a fork() or clone(), the parent and new child + process or thread share identical SVE configuration, matching that of the + parent before the call. + + +4. Signal handling +------------------- + +* A new signal frame record sve_context encodes the SVE registers on signal + delivery. [1] + +* This record is supplementary to fpsimd_context. The FPSR and FPCR registers + are only present in fpsimd_context. For convenience, the content of V0..V31 + is duplicated between sve_context and fpsimd_context. + +* The signal frame record for SVE always contains basic metadata, in particular + the thread's vector length (in sve_context.vl). + +* The SVE registers may or may not be included in the record, depending on + whether the registers are live for the thread. The registers are present if + and only if: + sve_context.head.size >= SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)). + +* If the registers are present, the remainder of the record has a vl-dependent + size and layout. Macros SVE_SIG_* are defined [1] to facilitate access to + the members. + +* If the SVE context is too big to fit in sigcontext.__reserved[], then extra + space is allocated on the stack, an extra_context record is written in + __reserved[] referencing this space. sve_context is then written in the + extra space. Refer to [1] for further details about this mechanism. + + +5. Signal return +----------------- + +When returning from a signal handler: + +* If there is no sve_context record in the signal frame, or if the record is + present but contains no register data as desribed in the previous section, + then the SVE registers/bits become non-live and take unspecified values. + +* If sve_context is present in the signal frame and contains full register + data, the SVE registers become live and are populated with the specified + data. However, for backward compatibility reasons, bits [127:0] of Z0..Z31 + are always restored from the corresponding members of fpsimd_context.vregs[] + and not from sve_context. The remaining bits are restored from sve_context. + +* Inclusion of fpsimd_context in the signal frame remains mandatory, + irrespective of whether sve_context is present or not. + +* The vector length cannot be changed via signal return. If sve_context.vl in + the signal frame does not match the current vector length, the signal return + attempt is treated as illegal, resulting in a forced SIGSEGV. + + +6. prctl extensions +-------------------- + +Some new prctl() calls are added to allow programs to manage the SVE vector +length: + +prctl(PR_SVE_SET_VL, unsigned long arg) + + Sets the vector length of the calling thread and related flags, where + arg == vl | flags. Other threads of the calling process are unaffected. + + vl is the desired vector length, where sve_vl_valid(vl) must be true. + + flags: + + PR_SVE_SET_VL_INHERIT + + Inherit the current vector length across execve(). Otherwise, the + vector length is reset to the system default at execve(). (See + Section 9.) + + PR_SVE_SET_VL_ONEXEC + + Defer the requested vector length change until the next execve() + performed by this thread. + + The effect is equivalent to implicit exceution of the following + call immediately after the next execve() (if any) by the thread: + + prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC) + + This allows launching of a new program with a different vector + length, while avoiding runtime side effects in the caller. + + + Without PR_SVE_SET_VL_ONEXEC, the requested change takes effect + immediately. + + + Return value: a nonnegative on success, or a negative value on error: + EINVAL: SVE not supported, invalid vector length requested, or + invalid flags. + + + On success: + + * Either the calling thread's vector length or the deferred vector length + to be applied at the next execve() by the thread (dependent on whether + PR_SVE_SET_VL_ONEXEC is present in arg), is set to the largest value + supported by the system that is less than or equal to vl. If vl == + SVE_VL_MAX, the value set will be the largest value supported by the + system. + + * Any previously outstanding deferred vector length change in the calling + thread is cancelled. + + * The returned value describes the resulting configuration, encoded as for + PR_SVE_GET_VL. The vector length reported in this value is the new + current vector length for this thread if PR_SVE_SET_VL_ONEXEC was not + present in arg; otherwise, the reported vector length is the deferred + vector length that will be applied at the next execve() by the calling + thread. + + * Changing the vector length causes all of P0..P15, FFR and all bits of + Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become + unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current + vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC + flag, does not constitute a change to the vector length for this purpose. + + +prctl(PR_SVE_GET_VL) + + Gets the vector length of the calling thread. + + The following flag may be OR-ed into the result: + + PR_SVE_SET_VL_INHERIT + + Vector length will be inherited across execve(). + + There is no way to determine whether there is an outstanding deferred + vector length change (which would only normally be the case between a + fork() or vfork() and the corresponding execve() in typical use). + + To extract the vector length from the result, and it with + PR_SVE_VL_LEN_MASK. + + Return value: a nonnegative value on success, or a negative value on error: + EINVAL: SVE not supported. + + +7. ptrace extensions +--------------------- + +* A new regset NT_ARM_SVE is defined for use with PTRACE_GETREGSET and + PTRACE_SETREGSET. + + Refer to [2] for definitions. + +The regset data starts with struct user_sve_header, containing: + + size + + Size of the complete regset, in bytes. + This depends on vl and possibly on other things in the future. + + If a call to PTRACE_GETREGSET requests less data than the value of + size, the caller can allocate a larger buffer and retry in order to + read the complete regset. + + max_size + + Maximum size in bytes that the regset can grow to for the target + thread. The regset won't grow bigger than this even if the target + thread changes its vector length etc. + + vl + + Target thread's current vector length, in bytes. + + max_vl + + Maximum possible vector length for the target thread. + + flags + + either + + SVE_PT_REGS_FPSIMD + + SVE registers are not live (GETREGSET) or are to be made + non-live (SETREGSET). + + The payload is of type struct user_fpsimd_state, with the same + meaning as for NT_PRFPREG, starting at offset + SVE_PT_FPSIMD_OFFSET from the start of user_sve_header. + + Extra data might be appended in the future: the size of the + payload should be obtained using SVE_PT_FPSIMD_SIZE(vq, flags). + + vq should be obtained using sve_vq_from_vl(vl). + + or + + SVE_PT_REGS_SVE + + SVE registers are live (GETREGSET) or are to be made live + (SETREGSET). + + The payload contains the SVE register data, starting at offset + SVE_PT_SVE_OFFSET from the start of user_sve_header, and with + size SVE_PT_SVE_SIZE(vq, flags); + + ... OR-ed with zero or more of the following flags, which have the same + meaning and behaviour as the corresponding PR_SET_VL_* flags: + + SVE_PT_VL_INHERIT + + SVE_PT_VL_ONEXEC (SETREGSET only). + +* The effects of changing the vector length and/or flags are equivalent to + those documented for PR_SVE_SET_VL. + + The caller must make a further GETREGSET call if it needs to know what VL is + actually set by SETREGSET, unless is it known in advance that the requested + VL is supported. + +* In the SVE_PT_REGS_SVE case, the size and layout of the payload depends on + the header fields. The SVE_PT_SVE_*() macros are provided to facilitate + access to the members. + +* In either case, for SETREGSET it is permissible to omit the payload, in which + case only the vector length and flags are changed (along with any + consequences of those changes). + +* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the + requested VL is not supported, the effect will be the same as if the + payload were omitted, except that an EIO error is reported. No + attempt is made to translate the payload data to the correct layout + for the vector length actually set. The thread's FPSIMD state is + preserved, but the remaining bits of the SVE registers become + unspecified. It is up to the caller to translate the payload layout + for the actual VL and retry. + +* The effect of writing a partial, incomplete payload is unspecified. + + +8. ELF coredump extensions +--------------------------- + +* A NT_ARM_SVE note will be added to each coredump for each thread of the + dumped process. The contents will be equivalent to the data that would have + been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread + when the coredump was generated. + + +9. System runtime configuration +-------------------------------- + +* To mitigate the ABI impact of expansion of the signal frame, a policy + mechanism is provided for administrators, distro maintainers and developers + to set the default vector length for userspace processes: + +/proc/sys/abi/sve_default_vector_length + + Writing the text representation of an integer to this file sets the system + default vector length to the specified value, unless the value is greater + than the maximum vector length supported by the system in which case the + default vector length is set to that maximum. + + The result can be determined by reopening the file and reading its + contents. + + At boot, the default vector length is initially set to 64 or the maximum + supported vector length, whichever is smaller. This determines the initial + vector length of the init process (PID 1). + + Reading this file returns the current system default vector length. + +* At every execve() call, the new vector length of the new process is set to + the system default vector length, unless + + * PR_SVE_SET_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the + calling thread, or + + * a deferred vector length change is pending, established via the + PR_SVE_SET_VL_ONEXEC flag (or SVE_PT_VL_ONEXEC). + +* Modifying the system default vector length does not affect the vector length + of any existing process or thread that does not make an execve() call. + + +Appendix A. SVE programmer's model (informative) +================================================= + +This section provides a minimal description of the additions made by SVE to the +ARMv8-A programmer's model that are relevant to this document. + +Note: This section is for information only and not intended to be complete or +to replace any architectural specification. + +A.1. Registers +--------------- + +In A64 state, SVE adds the following: + +* 32 8VL-bit vector registers Z0..Z31 + For each Zn, Zn bits [127:0] alias the ARMv8-A vector register Vn. + + A register write using a Vn register name zeros all bits of the corresponding + Zn except for bits [127:0]. + +* 16 VL-bit predicate registers P0..P15 + +* 1 VL-bit special-purpose predicate register FFR (the "first-fault register") + +* a VL "pseudo-register" that determines the size of each vector register + + The SVE instruction set architecture provides no way to write VL directly. + Instead, it can be modified only by EL1 and above, by writing appropriate + system registers. + +* The value of VL can be configured at runtime by EL1 and above: + 16 <= VL <= VLmax, where VL must be a multiple of 16. + +* The maximum vector length is determined by the hardware: + 16 <= VLmax <= 256. + + (The SVE architecture specifies 256, but permits future architecture + revisions to raise this limit.) + +* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point + operations in a similar way to the way in which they interact with ARMv8 + floating-point operations. + + 8VL-1 128 0 bit index + +---- //// -----------------+ + Z0 | : V0 | + : : + Z7 | : V7 | + Z8 | : * V8 | + : : : + Z15 | : *V15 | + Z16 | : V16 | + : : + Z31 | : V31 | + +---- //// -----------------+ + 31 0 + VL-1 0 +-------+ + +---- //// --+ FPSR | | + P0 | | +-------+ + : | | *FPCR | | + P15 | | +-------+ + +---- //// --+ + FFR | | +-----+ + +---- //// --+ VL | | + +-----+ + +(*) callee-save: + This only applies to bits [63:0] of Z-/V-registers. + FPCR contains callee-save and caller-save bits. See [4] for details. + + +A.2. Procedure call standard +----------------------------- + +The ARMv8-A base procedure call standard is extended as follows with respect to +the additional SVE register state: + +* All SVE register bits that are not shared with FP/SIMD are caller-save. + +* Z8 bits [63:0] .. Z15 bits [63:0] are callee-save. + + This follows from the way these bits are mapped to V8..V15, which are caller- + save in the base procedure call standard. + + +Appendix B. ARMv8-A FP/SIMD programmer's model +=============================================== + +Note: This section is for information only and not intended to be complete or +to replace any architectural specification. + +Refer to [4] for for more information. + +ARMv8-A defines the following floating-point / SIMD register state: + +* 32 128-bit vector registers V0..V31 +* 2 32-bit status/control registers FPSR, FPCR + + 127 0 bit index + +---------------+ + V0 | | + : : : + V7 | | + * V8 | | + : : : : + *V15 | | + V16 | | + : : : + V31 | | + +---------------+ + + 31 0 + +-------+ + FPSR | | + +-------+ + *FPCR | | + +-------+ + +(*) callee-save: + This only applies to bits [63:0] of V-registers. + FPCR contains a mixture of callee-save and caller-save bits. + + +References +========== + +[1] arch/arm64/include/uapi/asm/sigcontext.h + AArch64 Linux signal ABI definitions + +[2] arch/arm64/include/uapi/asm/ptrace.h + AArch64 Linux ptrace ABI definitions + +[3] linux/Documentation/arm64/cpu-feature-registers.txt + +[4] ARM IHI0055C + http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf + http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html + Procedure Call Standard for the ARM 64-bit Architecture (AArch64) diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.txt index 3d6951d63489563e60f4da62eabd8e49608479f8..8d8d8f06cab29aab5fb07b96c9a5e452515fb819 100644 --- a/Documentation/block/bfq-iosched.txt +++ b/Documentation/block/bfq-iosched.txt @@ -20,12 +20,27 @@ for that device, by setting low_latency to 0. See Section 3 for details on how to configure BFQ for the desired tradeoff between latency and throughput, or on how to maximize throughput. -On average CPUs, the current version of BFQ can handle devices -performing at most ~30K IOPS; at most ~50 KIOPS on faster CPUs. As a -reference, 30-50 KIOPS correspond to very high bandwidths with -sequential I/O (e.g., 8-12 GB/s if I/O requests are 256 KB large), and -to 120-200 MB/s with 4KB random I/O. BFQ is currently being tested on -multi-queue devices too. +BFQ has a non-null overhead, which limits the maximum IOPS that a CPU +can process for a device scheduled with BFQ. To give an idea of the +limits on slow or average CPUs, here are, first, the limits of BFQ for +three different CPUs, on, respectively, an average laptop, an old +desktop, and a cheap embedded system, in case full hierarchical +support is enabled (i.e., CONFIG_BFQ_GROUP_IOSCHED is set), but +CONFIG_DEBUG_BLK_CGROUP is not set (Section 4-2): +- Intel i7-4850HQ: 400 KIOPS +- AMD A8-3850: 250 KIOPS +- ARM CortexTM-A53 Octa-core: 80 KIOPS + +If CONFIG_DEBUG_BLK_CGROUP is set (and of course full hierarchical +support is enabled), then the sustainable throughput with BFQ +decreases, because all blkio.bfq* statistics are created and updated +(Section 4-2). For BFQ, this leads to the following maximum +sustainable throughputs, on the same systems as above: +- Intel i7-4850HQ: 310 KIOPS +- AMD A8-3850: 200 KIOPS +- ARM CortexTM-A53 Octa-core: 56 KIOPS + +BFQ works for multi-queue devices too. The table of contents follow. Impatients can just jump to Section 3. @@ -500,6 +515,22 @@ BFQ-specific files is "blkio.bfq." or "io.bfq." For example, the group parameter to set the weight of a group with BFQ is blkio.bfq.weight or io.bfq.weight. +As for cgroups-v1 (blkio controller), the exact set of stat files +created, and kept up-to-date by bfq, depends on whether +CONFIG_DEBUG_BLK_CGROUP is set. If it is set, then bfq creates all +the stat files documented in +Documentation/cgroup-v1/blkio-controller.txt. If, instead, +CONFIG_DEBUG_BLK_CGROUP is not set, then bfq creates only the files +blkio.bfq.io_service_bytes +blkio.bfq.io_service_bytes_recursive +blkio.bfq.io_serviced +blkio.bfq.io_serviced_recursive + +The value of CONFIG_DEBUG_BLK_CGROUP greatly influences the maximum +throughput sustainable with bfq, because updating the blkio.bfq.* +stats is rather costly, especially for some of the stats enabled by +CONFIG_DEBUG_BLK_CGROUP. + Parameters to set ----------------- diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 9490f2845f06950f044ae679f40d04c603eeed22..86927029a52db81ed81547fac93b09a6ffdd08da 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -216,10 +216,9 @@ may need to abort DMA operations and revert to PIO for the transfer, in which case a virtual mapping of the page is required. For SCSI it is also done in some scenarios where the low level driver cannot be trusted to handle a single sg entry correctly. The driver is expected to perform the -kmaps as needed on such occasions using the __bio_kmap_atomic and bio_kmap_irq -routines as appropriate. A driver could also use the blk_queue_bounce() -routine on its own to bounce highmem i/o to low memory for specific requests -if so desired. +kmaps as needed on such occasions as appropriate. A driver could also use +the blk_queue_bounce() routine on its own to bounce highmem i/o to low +memory for specific requests if so desired. iii. The i/o scheduler algorithm itself can be replaced/set as appropriate @@ -1137,8 +1136,8 @@ use dma_map_sg for scatter gather) to be able to ship it to the driver. For PIO drivers (or drivers that need to revert to PIO transfer once in a while (IDE for example)), where the CPU is doing the actual data transfer a virtual mapping is needed. If the driver supports highmem I/O, -(Sec 1.1, (ii) ) it needs to use __bio_kmap_atomic and bio_kmap_irq to -temporarily map a bio into the virtual address space. +(Sec 1.1, (ii) ) it needs to use kmap_atomic or similar to temporarily map +a bio into the virtual address space. 8. Prior/Related/Impacted patches diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt index 3140dbd860d8c72c341b4559264c532d062a6f35..733927a7b501a5f93b518db8417db181b0e8bbb7 100644 --- a/Documentation/block/null_blk.txt +++ b/Documentation/block/null_blk.txt @@ -38,7 +38,7 @@ gb=[Size in GB]: Default: 250GB bs=[Block size (in bytes)]: Default: 512 bytes The block size reported to the system. -nr_devices=[Number of devices]: Default: 2 +nr_devices=[Number of devices]: Default: 1 Number of block devices instantiated. They are instantiated as /dev/nullb0, etc. @@ -52,13 +52,13 @@ irqmode=[0-2]: Default: 1-Soft-irq 2: Timer: Waits a specific period (completion_nsec) for each IO before completion. -completion_nsec=[ns]: Default: 10.000ns +completion_nsec=[ns]: Default: 10,000ns Combined with irqmode=2 (timer). The time each completion event must wait. -submit_queues=[0..nr_cpus]: +submit_queues=[1..nr_cpus]: The number of submission queues attached to the device driver. If unset, it - defaults to 1 on single-queue and bio-based instances. For multi-queue, - it is ignored when use_per_node_hctx module parameter is 1. + defaults to 1. For multi-queue, it is ignored when use_per_node_hctx module + parameter is 1. hw_queue_depth=[0..qdepth]: Default: 64 The hardware queue depth of the device. @@ -73,3 +73,12 @@ use_per_node_hctx=[0/1]: Default: 0 use_lightnvm=[0/1]: Default: 0 Register device with LightNVM. Requires blk-mq and CONFIG_NVM to be enabled. + +no_sched=[0/1]: Default: 0 + 0: nullb* use default blk-mq io scheduler. + 1: nullb* doesn't use io scheduler. + +shared_tags=[0/1]: Default: 0 + 0: Tag set is not shared. + 1: Tag set shared between devices for blk-mq. Only makes sense with + nr_devices > 1, otherwise there's no tag set to share. diff --git a/Documentation/bpf/bpf_design_QA.txt b/Documentation/bpf/bpf_design_QA.txt new file mode 100644 index 0000000000000000000000000000000000000000..f3e458a0bb2f1f26e376239ffc4200b13294debf --- /dev/null +++ b/Documentation/bpf/bpf_design_QA.txt @@ -0,0 +1,156 @@ +BPF extensibility and applicability to networking, tracing, security +in the linux kernel and several user space implementations of BPF +virtual machine led to a number of misunderstanding on what BPF actually is. +This short QA is an attempt to address that and outline a direction +of where BPF is heading long term. + +Q: Is BPF a generic instruction set similar to x64 and arm64? +A: NO. + +Q: Is BPF a generic virtual machine ? +A: NO. + +BPF is generic instruction set _with_ C calling convention. + +Q: Why C calling convention was chosen? +A: Because BPF programs are designed to run in the linux kernel + which is written in C, hence BPF defines instruction set compatible + with two most used architectures x64 and arm64 (and takes into + consideration important quirks of other architectures) and + defines calling convention that is compatible with C calling + convention of the linux kernel on those architectures. + +Q: can multiple return values be supported in the future? +A: NO. BPF allows only register R0 to be used as return value. + +Q: can more than 5 function arguments be supported in the future? +A: NO. BPF calling convention only allows registers R1-R5 to be used + as arguments. BPF is not a standalone instruction set. + (unlike x64 ISA that allows msft, cdecl and other conventions) + +Q: can BPF programs access instruction pointer or return address? +A: NO. + +Q: can BPF programs access stack pointer ? +A: NO. Only frame pointer (register R10) is accessible. + From compiler point of view it's necessary to have stack pointer. + For example LLVM defines register R11 as stack pointer in its + BPF backend, but it makes sure that generated code never uses it. + +Q: Does C-calling convention diminishes possible use cases? +A: YES. BPF design forces addition of major functionality in the form + of kernel helper functions and kernel objects like BPF maps with + seamless interoperability between them. It lets kernel call into + BPF programs and programs call kernel helpers with zero overhead. + As all of them were native C code. That is particularly the case + for JITed BPF programs that are indistinguishable from + native kernel C code. + +Q: Does it mean that 'innovative' extensions to BPF code are disallowed? +A: Soft yes. At least for now until BPF core has support for + bpf-to-bpf calls, indirect calls, loops, global variables, + jump tables, read only sections and all other normal constructs + that C code can produce. + +Q: Can loops be supported in a safe way? +A: It's not clear yet. BPF developers are trying to find a way to + support bounded loops where the verifier can guarantee that + the program terminates in less than 4096 instructions. + +Q: How come LD_ABS and LD_IND instruction are present in BPF whereas + C code cannot express them and has to use builtin intrinsics? +A: This is artifact of compatibility with classic BPF. Modern + networking code in BPF performs better without them. + See 'direct packet access'. + +Q: It seems not all BPF instructions are one-to-one to native CPU. + For example why BPF_JNE and other compare and jumps are not cpu-like? +A: This was necessary to avoid introducing flags into ISA which are + impossible to make generic and efficient across CPU architectures. + +Q: why BPF_DIV instruction doesn't map to x64 div? +A: Because if we picked one-to-one relationship to x64 it would have made + it more complicated to support on arm64 and other archs. Also it + needs div-by-zero runtime check. + +Q: why there is no BPF_SDIV for signed divide operation? +A: Because it would be rarely used. llvm errors in such case and + prints a suggestion to use unsigned divide instead + +Q: Why BPF has implicit prologue and epilogue? +A: Because architectures like sparc have register windows and in general + there are enough subtle differences between architectures, so naive + store return address into stack won't work. Another reason is BPF has + to be safe from division by zero (and legacy exception path + of LD_ABS insn). Those instructions need to invoke epilogue and + return implicitly. + +Q: Why BPF_JLT and BPF_JLE instructions were not introduced in the beginning? +A: Because classic BPF didn't have them and BPF authors felt that compiler + workaround would be acceptable. Turned out that programs lose performance + due to lack of these compare instructions and they were added. + These two instructions is a perfect example what kind of new BPF + instructions are acceptable and can be added in the future. + These two already had equivalent instructions in native CPUs. + New instructions that don't have one-to-one mapping to HW instructions + will not be accepted. + +Q: BPF 32-bit subregisters have a requirement to zero upper 32-bits of BPF + registers which makes BPF inefficient virtual machine for 32-bit + CPU architectures and 32-bit HW accelerators. Can true 32-bit registers + be added to BPF in the future? +A: NO. The first thing to improve performance on 32-bit archs is to teach + LLVM to generate code that uses 32-bit subregisters. Then second step + is to teach verifier to mark operations where zero-ing upper bits + is unnecessary. Then JITs can take advantage of those markings and + drastically reduce size of generated code and improve performance. + +Q: Does BPF have a stable ABI? +A: YES. BPF instructions, arguments to BPF programs, set of helper + functions and their arguments, recognized return codes are all part + of ABI. However when tracing programs are using bpf_probe_read() helper + to walk kernel internal datastructures and compile with kernel + internal headers these accesses can and will break with newer + kernels. The union bpf_attr -> kern_version is checked at load time + to prevent accidentally loading kprobe-based bpf programs written + for a different kernel. Networking programs don't do kern_version check. + +Q: How much stack space a BPF program uses? +A: Currently all program types are limited to 512 bytes of stack + space, but the verifier computes the actual amount of stack used + and both interpreter and most JITed code consume necessary amount. + +Q: Can BPF be offloaded to HW? +A: YES. BPF HW offload is supported by NFP driver. + +Q: Does classic BPF interpreter still exist? +A: NO. Classic BPF programs are converted into extend BPF instructions. + +Q: Can BPF call arbitrary kernel functions? +A: NO. BPF programs can only call a set of helper functions which + is defined for every program type. + +Q: Can BPF overwrite arbitrary kernel memory? +A: NO. Tracing bpf programs can _read_ arbitrary memory with bpf_probe_read() + and bpf_probe_read_str() helpers. Networking programs cannot read + arbitrary memory, since they don't have access to these helpers. + Programs can never read or write arbitrary memory directly. + +Q: Can BPF overwrite arbitrary user memory? +A: Sort-of. Tracing BPF programs can overwrite the user memory + of the current task with bpf_probe_write_user(). Every time such + program is loaded the kernel will print warning message, so + this helper is only useful for experiments and prototypes. + Tracing BPF programs are root only. + +Q: When bpf_trace_printk() helper is used the kernel prints nasty + warning message. Why is that? +A: This is done to nudge program authors into better interfaces when + programs need to pass data to user space. Like bpf_perf_event_output() + can be used to efficiently stream data via perf ring buffer. + BPF maps can be used for asynchronous data sharing between kernel + and user space. bpf_trace_printk() should only be used for debugging. + +Q: Can BPF functionality such as new program or map types, new + helpers, etc be added out of kernel module code? +A: NO. diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index dc44785dc0fa146a2de30aa11ef2c410f1b00622..779211fbb69ffac450f22b0ad6864c7c6c2bd98f 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -893,10 +893,6 @@ Controllers CPU --- -.. note:: - - The interface for the cpu controller hasn't been merged yet - The "cpu" controllers regulates distribution of CPU cycles. This controller implements weight and absolute bandwidth limit models for normal scheduling policy and absolute bandwidth allocation model for @@ -910,12 +906,16 @@ All time durations are in microseconds. cpu.stat A read-only flat-keyed file which exists on non-root cgroups. + This file exists whether the controller is enabled or not. - It reports the following six stats: + It always reports the following three stats: - usage_usec - user_usec - system_usec + + and the following three when the controller is enabled: + - nr_periods - nr_throttled - throttled_usec @@ -926,6 +926,18 @@ All time durations are in microseconds. The weight in the range [1, 10000]. + cpu.weight.nice + A read-write single value file which exists on non-root + cgroups. The default is "0". + + The nice value is in the range [-20, 19]. + + This interface file is an alternative interface for + "cpu.weight" and allows reading and setting weight using the + same values used by nice(2). Because the range is smaller and + granularity is coarser for the nice values, the read value is + the closest approximation of the current weight. + cpu.max A read-write two value file which exists on non-root cgroups. The default is "max 100000". @@ -938,26 +950,6 @@ All time durations are in microseconds. $PERIOD duration. "max" for $MAX indicates no limit. If only one number is written, $MAX is updated. - cpu.rt.max - .. note:: - - The semantics of this file is still under discussion and the - interface hasn't been merged yet - - A read-write two value file which exists on all cgroups. - The default is "0 100000". - - The maximum realtime runtime allocation. Over-committing - configurations are disallowed and process migrations are - rejected if not enough bandwidth is available. It's in the - following format:: - - $MAX $PERIOD - - which indicates that the group may consume upto $MAX in each - $PERIOD duration. If only one number is written, $MAX is - updated. - Memory ------ diff --git a/Documentation/clearing-warn-once.txt b/Documentation/clearing-warn-once.txt new file mode 100644 index 0000000000000000000000000000000000000000..5b1f5d547be12d965da254a83e6b9cb24272842d --- /dev/null +++ b/Documentation/clearing-warn-once.txt @@ -0,0 +1,7 @@ + +WARN_ONCE / WARN_ON_ONCE only print a warning once. + +echo 1 > /sys/kernel/debug/clear_warn_once + +clears the state and allows the warnings to print once again. +This can be useful after test suite runs to reproduce problems. diff --git a/Documentation/core-api/local_ops.rst b/Documentation/core-api/local_ops.rst index 1062ddba62c7608bb96f4211e2a6a0863f8a47c3..2ac3f9f2984531dda8a28ac9daaf3aa3d0ea8985 100644 --- a/Documentation/core-api/local_ops.rst +++ b/Documentation/core-api/local_ops.rst @@ -177,18 +177,14 @@ Here is a sample module which implements a basic per cpu counter using printk("Read : CPU %d, count %ld\n", cpu, local_read(&per_cpu(counters, cpu))); } - del_timer(&test_timer); - test_timer.expires = jiffies + 1000; - add_timer(&test_timer); + mod_timer(&test_timer, jiffies + 1000); } static int __init test_init(void) { /* initialize the timer that will increment the counter */ - init_timer(&test_timer); - test_timer.function = do_test_timer; - test_timer.expires = jiffies + 1; - add_timer(&test_timer); + timer_setup(&test_timer, do_test_timer, 0); + mod_timer(&test_timer, jiffies + 1); return 0; } diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt index 2bbe207354ed7c7e73ceb7f51ddb105c49827a1d..a873855c811d63f3a47cd2ec830404abb89d48c8 100644 --- a/Documentation/cpu-freq/cpufreq-stats.txt +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -90,6 +90,9 @@ Freq_i to Freq_j. Freq_i is in descending order with increasing rows and Freq_j is in descending order with increasing columns. The output here also contains the actual freq values for each row and column for better readability. +If the transition table is bigger than PAGE_SIZE, reading this will +return an -EFBIG error. + -------------------------------------------------------------------------------- :/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table From : To diff --git a/Documentation/crypto/api-samples.rst b/Documentation/crypto/api-samples.rst index 2531948db89fbb2aaffc6e1511149102f6052071..006827e30d0664939d71b716e870ee08c9532852 100644 --- a/Documentation/crypto/api-samples.rst +++ b/Documentation/crypto/api-samples.rst @@ -7,59 +7,27 @@ Code Example For Symmetric Key Cipher Operation :: - struct tcrypt_result { - struct completion completion; - int err; - }; - /* tie all data structures together */ struct skcipher_def { struct scatterlist sg; struct crypto_skcipher *tfm; struct skcipher_request *req; - struct tcrypt_result result; + struct crypto_wait wait; }; - /* Callback function */ - static void test_skcipher_cb(struct crypto_async_request *req, int error) - { - struct tcrypt_result *result = req->data; - - if (error == -EINPROGRESS) - return; - result->err = error; - complete(&result->completion); - pr_info("Encryption finished successfully\n"); - } - /* Perform cipher operation */ static unsigned int test_skcipher_encdec(struct skcipher_def *sk, int enc) { - int rc = 0; + int rc; if (enc) - rc = crypto_skcipher_encrypt(sk->req); + rc = crypto_wait_req(crypto_skcipher_encrypt(sk->req), &sk->wait); else - rc = crypto_skcipher_decrypt(sk->req); - - switch (rc) { - case 0: - break; - case -EINPROGRESS: - case -EBUSY: - rc = wait_for_completion_interruptible( - &sk->result.completion); - if (!rc && !sk->result.err) { - reinit_completion(&sk->result.completion); - break; - } - default: - pr_info("skcipher encrypt returned with %d result %d\n", - rc, sk->result.err); - break; - } - init_completion(&sk->result.completion); + rc = crypto_wait_req(crypto_skcipher_decrypt(sk->req), &sk->wait); + + if (rc) + pr_info("skcipher encrypt returned with result %d\n", rc); return rc; } @@ -89,8 +57,8 @@ Code Example For Symmetric Key Cipher Operation } skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, - test_skcipher_cb, - &sk.result); + crypto_req_done, + &sk.wait); /* AES 256 with random key */ get_random_bytes(&key, 32); @@ -122,7 +90,7 @@ Code Example For Symmetric Key Cipher Operation /* We encrypt one block */ sg_init_one(&sk.sg, scratchpad, 16); skcipher_request_set_crypt(req, &sk.sg, &sk.sg, 16, ivdata); - init_completion(&sk.result.completion); + crypto_init_wait(&sk.wait); /* encrypt data */ ret = test_skcipher_encdec(&sk, 1); diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst index 37e474ff69115da89dd780475a35d119d5ee4383..94f41c290bfc69eb417066c0cff30f361f1c9bcc 100644 --- a/Documentation/dev-tools/coccinelle.rst +++ b/Documentation/dev-tools/coccinelle.rst @@ -33,9 +33,6 @@ of many distributions, e.g. : You can get the latest version released from the Coccinelle homepage at http://coccinelle.lip6.fr/ -Information and tips about Coccinelle are also provided on the wiki -pages at http://cocci.ekstranet.diku.dk/wiki/doku.php - Once you have it, run the following command:: ./configure diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst index a81787cd47d793746f28e1035630b13298dc65f8..e313925fb0fa50d5826dd194461f6e5ec00f424a 100644 --- a/Documentation/dev-tools/index.rst +++ b/Documentation/dev-tools/index.rst @@ -21,7 +21,6 @@ whole; patches welcome! kasan ubsan kmemleak - kmemcheck gdb-kernel-debugging kgdb kselftest diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst index 44886c91e112d4d21a41e0c4d1a96f37a584aa68..c2f6452e38ed000edc63440ad66b49da63aed481 100644 --- a/Documentation/dev-tools/kcov.rst +++ b/Documentation/dev-tools/kcov.rst @@ -12,19 +12,30 @@ To achieve this goal it does not collect coverage in soft/hard interrupts and instrumentation of some inherently non-deterministic parts of kernel is disabled (e.g. scheduler, locking). -Usage ------ +kcov is also able to collect comparison operands from the instrumented code +(this feature currently requires that the kernel is compiled with clang). + +Prerequisites +------------- Configure the kernel with:: CONFIG_KCOV=y CONFIG_KCOV requires gcc built on revision 231296 or later. + +If the comparison operands need to be collected, set:: + + CONFIG_KCOV_ENABLE_COMPARISONS=y + Profiling data will only become accessible once debugfs has been mounted:: mount -t debugfs none /sys/kernel/debug -The following program demonstrates kcov usage from within a test program: +Coverage collection +------------------- +The following program demonstrates coverage collection from within a test +program using kcov: .. code-block:: c @@ -44,6 +55,9 @@ The following program demonstrates kcov usage from within a test program: #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (64<<10) + #define KCOV_TRACE_PC 0 + #define KCOV_TRACE_CMP 1 + int main(int argc, char **argv) { int fd; @@ -64,7 +78,7 @@ The following program demonstrates kcov usage from within a test program: if ((void*)cover == MAP_FAILED) perror("mmap"), exit(1); /* Enable coverage collection on the current thread. */ - if (ioctl(fd, KCOV_ENABLE, 0)) + if (ioctl(fd, KCOV_ENABLE, KCOV_TRACE_PC)) perror("ioctl"), exit(1); /* Reset coverage from the tail of the ioctl() call. */ __atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED); @@ -111,3 +125,80 @@ The interface is fine-grained to allow efficient forking of test processes. That is, a parent process opens /sys/kernel/debug/kcov, enables trace mode, mmaps coverage buffer and then forks child processes in a loop. Child processes only need to enable coverage (disable happens automatically on thread end). + +Comparison operands collection +------------------------------ +Comparison operands collection is similar to coverage collection: + +.. code-block:: c + + /* Same includes and defines as above. */ + + /* Number of 64-bit words per record. */ + #define KCOV_WORDS_PER_CMP 4 + + /* + * The format for the types of collected comparisons. + * + * Bit 0 shows whether one of the arguments is a compile-time constant. + * Bits 1 & 2 contain log2 of the argument size, up to 8 bytes. + */ + + #define KCOV_CMP_CONST (1 << 0) + #define KCOV_CMP_SIZE(n) ((n) << 1) + #define KCOV_CMP_MASK KCOV_CMP_SIZE(3) + + int main(int argc, char **argv) + { + int fd; + uint64_t *cover, type, arg1, arg2, is_const, size; + unsigned long n, i; + + fd = open("/sys/kernel/debug/kcov", O_RDWR); + if (fd == -1) + perror("open"), exit(1); + if (ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE)) + perror("ioctl"), exit(1); + /* + * Note that the buffer pointer is of type uint64_t*, because all + * the comparison operands are promoted to uint64_t. + */ + cover = (uint64_t *)mmap(NULL, COVER_SIZE * sizeof(unsigned long), + PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if ((void*)cover == MAP_FAILED) + perror("mmap"), exit(1); + /* Note KCOV_TRACE_CMP instead of KCOV_TRACE_PC. */ + if (ioctl(fd, KCOV_ENABLE, KCOV_TRACE_CMP)) + perror("ioctl"), exit(1); + __atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED); + read(-1, NULL, 0); + /* Read number of comparisons collected. */ + n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED); + for (i = 0; i < n; i++) { + type = cover[i * KCOV_WORDS_PER_CMP + 1]; + /* arg1 and arg2 - operands of the comparison. */ + arg1 = cover[i * KCOV_WORDS_PER_CMP + 2]; + arg2 = cover[i * KCOV_WORDS_PER_CMP + 3]; + /* ip - caller address. */ + ip = cover[i * KCOV_WORDS_PER_CMP + 4]; + /* size of the operands. */ + size = 1 << ((type & KCOV_CMP_MASK) >> 1); + /* is_const - true if either operand is a compile-time constant.*/ + is_const = type & KCOV_CMP_CONST; + printf("ip: 0x%lx type: 0x%lx, arg1: 0x%lx, arg2: 0x%lx, " + "size: %lu, %s\n", + ip, type, arg1, arg2, size, + is_const ? "const" : "non-const"); + } + if (ioctl(fd, KCOV_DISABLE, 0)) + perror("ioctl"), exit(1); + /* Free resources. */ + if (munmap(cover, COVER_SIZE * sizeof(unsigned long))) + perror("munmap"), exit(1); + if (close(fd)) + perror("close"), exit(1); + return 0; + } + +Note that the kcov modes (coverage collection or comparison operands) are +mutually exclusive. diff --git a/Documentation/dev-tools/kmemcheck.rst b/Documentation/dev-tools/kmemcheck.rst deleted file mode 100644 index 7f3d1985de743f00860e69033564043aa145ad39..0000000000000000000000000000000000000000 --- a/Documentation/dev-tools/kmemcheck.rst +++ /dev/null @@ -1,733 +0,0 @@ -Getting started with kmemcheck -============================== - -Vegard Nossum - - -Introduction ------------- - -kmemcheck is a debugging feature for the Linux Kernel. More specifically, it -is a dynamic checker that detects and warns about some uses of uninitialized -memory. - -Userspace programmers might be familiar with Valgrind's memcheck. The main -difference between memcheck and kmemcheck is that memcheck works for userspace -programs only, and kmemcheck works for the kernel only. The implementations -are of course vastly different. Because of this, kmemcheck is not as accurate -as memcheck, but it turns out to be good enough in practice to discover real -programmer errors that the compiler is not able to find through static -analysis. - -Enabling kmemcheck on a kernel will probably slow it down to the extent that -the machine will not be usable for normal workloads such as e.g. an -interactive desktop. kmemcheck will also cause the kernel to use about twice -as much memory as normal. For this reason, kmemcheck is strictly a debugging -feature. - - -Downloading ------------ - -As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel. - - -Configuring and compiling -------------------------- - -kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of -configuration variables must have specific settings in order for the kmemcheck -menu to even appear in "menuconfig". These are: - -- ``CONFIG_CC_OPTIMIZE_FOR_SIZE=n`` - This option is located under "General setup" / "Optimize for size". - - Without this, gcc will use certain optimizations that usually lead to - false positive warnings from kmemcheck. An example of this is a 16-bit - field in a struct, where gcc may load 32 bits, then discard the upper - 16 bits. kmemcheck sees only the 32-bit load, and may trigger a - warning for the upper 16 bits (if they're uninitialized). - -- ``CONFIG_SLAB=y`` or ``CONFIG_SLUB=y`` - This option is located under "General setup" / "Choose SLAB - allocator". - -- ``CONFIG_FUNCTION_TRACER=n`` - This option is located under "Kernel hacking" / "Tracers" / "Kernel - Function Tracer" - - When function tracing is compiled in, gcc emits a call to another - function at the beginning of every function. This means that when the - page fault handler is called, the ftrace framework will be called - before kmemcheck has had a chance to handle the fault. If ftrace then - modifies memory that was tracked by kmemcheck, the result is an - endless recursive page fault. - -- ``CONFIG_DEBUG_PAGEALLOC=n`` - This option is located under "Kernel hacking" / "Memory Debugging" - / "Debug page memory allocations". - -In addition, I highly recommend turning on ``CONFIG_DEBUG_INFO=y``. This is also -located under "Kernel hacking". With this, you will be able to get line number -information from the kmemcheck warnings, which is extremely valuable in -debugging a problem. This option is not mandatory, however, because it slows -down the compilation process and produces a much bigger kernel image. - -Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory -Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows -a description of the kmemcheck configuration variables: - -- ``CONFIG_KMEMCHECK`` - This must be enabled in order to use kmemcheck at all... - -- ``CONFIG_KMEMCHECK_``[``DISABLED`` | ``ENABLED`` | ``ONESHOT``]``_BY_DEFAULT`` - This option controls the status of kmemcheck at boot-time. "Enabled" - will enable kmemcheck right from the start, "disabled" will boot the - kernel as normal (but with the kmemcheck code compiled in, so it can - be enabled at run-time after the kernel has booted), and "one-shot" is - a special mode which will turn kmemcheck off automatically after - detecting the first use of uninitialized memory. - - If you are using kmemcheck to actively debug a problem, then you - probably want to choose "enabled" here. - - The one-shot mode is mostly useful in automated test setups because it - can prevent floods of warnings and increase the chances of the machine - surviving in case something is really wrong. In other cases, the one- - shot mode could actually be counter-productive because it would turn - itself off at the very first error -- in the case of a false positive - too -- and this would come in the way of debugging the specific - problem you were interested in. - - If you would like to use your kernel as normal, but with a chance to - enable kmemcheck in case of some problem, it might be a good idea to - choose "disabled" here. When kmemcheck is disabled, most of the run- - time overhead is not incurred, and the kernel will be almost as fast - as normal. - -- ``CONFIG_KMEMCHECK_QUEUE_SIZE`` - Select the maximum number of error reports to store in an internal - (fixed-size) buffer. Since errors can occur virtually anywhere and in - any context, we need a temporary storage area which is guaranteed not - to generate any other page faults when accessed. The queue will be - emptied as soon as a tasklet may be scheduled. If the queue is full, - new error reports will be lost. - - The default value of 64 is probably fine. If some code produces more - than 64 errors within an irqs-off section, then the code is likely to - produce many, many more, too, and these additional reports seldom give - any more information (the first report is usually the most valuable - anyway). - - This number might have to be adjusted if you are not using serial - console or similar to capture the kernel log. If you are using the - "dmesg" command to save the log, then getting a lot of kmemcheck - warnings might overflow the kernel log itself, and the earlier reports - will get lost in that way instead. Try setting this to 10 or so on - such a setup. - -- ``CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT`` - Select the number of shadow bytes to save along with each entry of the - error-report queue. These bytes indicate what parts of an allocation - are initialized, uninitialized, etc. and will be displayed when an - error is detected to help the debugging of a particular problem. - - The number entered here is actually the logarithm of the number of - bytes that will be saved. So if you pick for example 5 here, kmemcheck - will save 2^5 = 32 bytes. - - The default value should be fine for debugging most problems. It also - fits nicely within 80 columns. - -- ``CONFIG_KMEMCHECK_PARTIAL_OK`` - This option (when enabled) works around certain GCC optimizations that - produce 32-bit reads from 16-bit variables where the upper 16 bits are - thrown away afterwards. - - The default value (enabled) is recommended. This may of course hide - some real errors, but disabling it would probably produce a lot of - false positives. - -- ``CONFIG_KMEMCHECK_BITOPS_OK`` - This option silences warnings that would be generated for bit-field - accesses where not all the bits are initialized at the same time. This - may also hide some real bugs. - - This option is probably obsolete, or it should be replaced with - the kmemcheck-/bitfield-annotations for the code in question. The - default value is therefore fine. - -Now compile the kernel as usual. - - -How to use ----------- - -Booting -~~~~~~~ - -First some information about the command-line options. There is only one -option specific to kmemcheck, and this is called "kmemcheck". It can be used -to override the default mode as chosen by the ``CONFIG_KMEMCHECK_*_BY_DEFAULT`` -option. Its possible settings are: - -- ``kmemcheck=0`` (disabled) -- ``kmemcheck=1`` (enabled) -- ``kmemcheck=2`` (one-shot mode) - -If SLUB debugging has been enabled in the kernel, it may take precedence over -kmemcheck in such a way that the slab caches which are under SLUB debugging -will not be tracked by kmemcheck. In order to ensure that this doesn't happen -(even though it shouldn't by default), use SLUB's boot option ``slub_debug``, -like this: ``slub_debug=-`` - -In fact, this option may also be used for fine-grained control over SLUB vs. -kmemcheck. For example, if the command line includes -``kmemcheck=1 slub_debug=,dentry``, then SLUB debugging will be used only -for the "dentry" slab cache, and with kmemcheck tracking all the other -caches. This is advanced usage, however, and is not generally recommended. - - -Run-time enable/disable -~~~~~~~~~~~~~~~~~~~~~~~ - -When the kernel has booted, it is possible to enable or disable kmemcheck at -run-time. WARNING: This feature is still experimental and may cause false -positive warnings to appear. Therefore, try not to use this. If you find that -it doesn't work properly (e.g. you see an unreasonable amount of warnings), I -will be happy to take bug reports. - -Use the file ``/proc/sys/kernel/kmemcheck`` for this purpose, e.g.:: - - $ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck - -The numbers are the same as for the ``kmemcheck=`` command-line option. - - -Debugging -~~~~~~~~~ - -A typical report will look something like this:: - - WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024) - 80000000000000000000000000000000000000000088ffff0000000000000000 - i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u - ^ - - Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A - RIP: 0010:[] [] __dequeue_signal+0xc8/0x190 - RSP: 0018:ffff88003cdf7d98 EFLAGS: 00210002 - RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009 - RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84 - RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000 - R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e - R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8 - FS: 0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000 - CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 - CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0 - DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 - DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 - [] dequeue_signal+0x8e/0x170 - [] get_signal_to_deliver+0x98/0x390 - [] do_notify_resume+0xad/0x7d0 - [] int_signal+0x12/0x17 - [] 0xffffffffffffffff - -The single most valuable information in this report is the RIP (or EIP on 32- -bit) value. This will help us pinpoint exactly which instruction that caused -the warning. - -If your kernel was compiled with ``CONFIG_DEBUG_INFO=y``, then all we have to do -is give this address to the addr2line program, like this:: - - $ addr2line -e vmlinux -i ffffffff8104ede8 - arch/x86/include/asm/string_64.h:12 - include/asm-generic/siginfo.h:287 - kernel/signal.c:380 - kernel/signal.c:410 - -The "``-e vmlinux``" tells addr2line which file to look in. **IMPORTANT:** -This must be the vmlinux of the kernel that produced the warning in the -first place! If not, the line number information will almost certainly be -wrong. - -The "``-i``" tells addr2line to also print the line numbers of inlined -functions. In this case, the flag was very important, because otherwise, -it would only have printed the first line, which is just a call to -``memcpy()``, which could be called from a thousand places in the kernel, and -is therefore not very useful. These inlined functions would not show up in -the stack trace above, simply because the kernel doesn't load the extra -debugging information. This technique can of course be used with ordinary -kernel oopses as well. - -In this case, it's the caller of ``memcpy()`` that is interesting, and it can be -found in ``include/asm-generic/siginfo.h``, line 287:: - - 281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) - 282 { - 283 if (from->si_code < 0) - 284 memcpy(to, from, sizeof(*to)); - 285 else - 286 /* _sigchld is currently the largest know union member */ - 287 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld)); - 288 } - -Since this was a read (kmemcheck usually warns about reads only, though it can -warn about writes to unallocated or freed memory as well), it was probably the -"from" argument which contained some uninitialized bytes. Following the chain -of calls, we move upwards to see where "from" was allocated or initialized, -``kernel/signal.c``, line 380:: - - 359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info) - 360 { - ... - 367 list_for_each_entry(q, &list->list, list) { - 368 if (q->info.si_signo == sig) { - 369 if (first) - 370 goto still_pending; - 371 first = q; - ... - 377 if (first) { - 378 still_pending: - 379 list_del_init(&first->list); - 380 copy_siginfo(info, &first->info); - 381 __sigqueue_free(first); - ... - 392 } - 393 } - -Here, it is ``&first->info`` that is being passed on to ``copy_siginfo()``. The -variable ``first`` was found on a list -- passed in as the second argument to -``collect_signal()``. We continue our journey through the stack, to figure out -where the item on "list" was allocated or initialized. We move to line 410:: - - 395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask, - 396 siginfo_t *info) - 397 { - ... - 410 collect_signal(sig, pending, info); - ... - 414 } - -Now we need to follow the ``pending`` pointer, since that is being passed on to -``collect_signal()`` as ``list``. At this point, we've run out of lines from the -"addr2line" output. Not to worry, we just paste the next addresses from the -kmemcheck stack dump, i.e.:: - - [] dequeue_signal+0x8e/0x170 - [] get_signal_to_deliver+0x98/0x390 - [] do_notify_resume+0xad/0x7d0 - [] int_signal+0x12/0x17 - - $ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \ - ffffffff8100b87d ffffffff8100c7b5 - kernel/signal.c:446 - kernel/signal.c:1806 - arch/x86/kernel/signal.c:805 - arch/x86/kernel/signal.c:871 - arch/x86/kernel/entry_64.S:694 - -Remember that since these addresses were found on the stack and not as the -RIP value, they actually point to the _next_ instruction (they are return -addresses). This becomes obvious when we look at the code for line 446:: - - 422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) - 423 { - ... - 431 signr = __dequeue_signal(&tsk->signal->shared_pending, - 432 mask, info); - 433 /* - 434 * itimer signal ? - 435 * - 436 * itimers are process shared and we restart periodic - 437 * itimers in the signal delivery path to prevent DoS - 438 * attacks in the high resolution timer case. This is - 439 * compliant with the old way of self restarting - 440 * itimers, as the SIGALRM is a legacy signal and only - 441 * queued once. Changing the restart behaviour to - 442 * restart the timer in the signal dequeue path is - 443 * reducing the timer noise on heavy loaded !highres - 444 * systems too. - 445 */ - 446 if (unlikely(signr == SIGALRM)) { - ... - 489 } - -So instead of looking at 446, we should be looking at 431, which is the line -that executes just before 446. Here we see that what we are looking for is -``&tsk->signal->shared_pending``. - -Our next task is now to figure out which function that puts items on this -``shared_pending`` list. A crude, but efficient tool, is ``git grep``:: - - $ git grep -n 'shared_pending' kernel/ - ... - kernel/signal.c:828: pending = group ? &t->signal->shared_pending : &t->pending; - kernel/signal.c:1339: pending = group ? &t->signal->shared_pending : &t->pending; - ... - -There were more results, but none of them were related to list operations, -and these were the only assignments. We inspect the line numbers more closely -and find that this is indeed where items are being added to the list:: - - 816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t, - 817 int group) - 818 { - ... - 828 pending = group ? &t->signal->shared_pending : &t->pending; - ... - 851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN && - 852 (is_si_special(info) || - 853 info->si_code >= 0))); - 854 if (q) { - 855 list_add_tail(&q->list, &pending->list); - ... - 890 } - -and:: - - 1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group) - 1310 { - .... - 1339 pending = group ? &t->signal->shared_pending : &t->pending; - 1340 list_add_tail(&q->list, &pending->list); - .... - 1347 } - -In the first case, the list element we are looking for, ``q``, is being -returned from the function ``__sigqueue_alloc()``, which looks like an -allocation function. Let's take a look at it:: - - 187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags, - 188 int override_rlimit) - 189 { - 190 struct sigqueue *q = NULL; - 191 struct user_struct *user; - 192 - 193 /* - 194 * We won't get problems with the target's UID changing under us - 195 * because changing it requires RCU be used, and if t != current, the - 196 * caller must be holding the RCU readlock (by way of a spinlock) and - 197 * we use RCU protection here - 198 */ - 199 user = get_uid(__task_cred(t)->user); - 200 atomic_inc(&user->sigpending); - 201 if (override_rlimit || - 202 atomic_read(&user->sigpending) <= - 203 t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur) - 204 q = kmem_cache_alloc(sigqueue_cachep, flags); - 205 if (unlikely(q == NULL)) { - 206 atomic_dec(&user->sigpending); - 207 free_uid(user); - 208 } else { - 209 INIT_LIST_HEAD(&q->list); - 210 q->flags = 0; - 211 q->user = user; - 212 } - 213 - 214 return q; - 215 } - -We see that this function initializes ``q->list``, ``q->flags``, and -``q->user``. It seems that now is the time to look at the definition of -``struct sigqueue``, e.g.:: - - 14 struct sigqueue { - 15 struct list_head list; - 16 int flags; - 17 siginfo_t info; - 18 struct user_struct *user; - 19 }; - -And, you might remember, it was a ``memcpy()`` on ``&first->info`` that -caused the warning, so this makes perfect sense. It also seems reasonable -to assume that it is the caller of ``__sigqueue_alloc()`` that has the -responsibility of filling out (initializing) this member. - -But just which fields of the struct were uninitialized? Let's look at -kmemcheck's report again:: - - WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024) - 80000000000000000000000000000000000000000088ffff0000000000000000 - i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u - ^ - -These first two lines are the memory dump of the memory object itself, and -the shadow bytemap, respectively. The memory object itself is in this case -``&first->info``. Just beware that the start of this dump is NOT the start -of the object itself! The position of the caret (^) corresponds with the -address of the read (ffff88003e4a2024). - -The shadow bytemap dump legend is as follows: - -- i: initialized -- u: uninitialized -- a: unallocated (memory has been allocated by the slab layer, but has not - yet been handed off to anybody) -- f: freed (memory has been allocated by the slab layer, but has been freed - by the previous owner) - -In order to figure out where (relative to the start of the object) the -uninitialized memory was located, we have to look at the disassembly. For -that, we'll need the RIP address again:: - - RIP: 0010:[] [] __dequeue_signal+0xc8/0x190 - - $ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8: - ffffffff8104edc8: mov %r8,0x8(%r8) - ffffffff8104edcc: test %r10d,%r10d - ffffffff8104edcf: js ffffffff8104ee88 <__dequeue_signal+0x168> - ffffffff8104edd5: mov %rax,%rdx - ffffffff8104edd8: mov $0xc,%ecx - ffffffff8104eddd: mov %r13,%rdi - ffffffff8104ede0: mov $0x30,%eax - ffffffff8104ede5: mov %rdx,%rsi - ffffffff8104ede8: rep movsl %ds:(%rsi),%es:(%rdi) - ffffffff8104edea: test $0x2,%al - ffffffff8104edec: je ffffffff8104edf0 <__dequeue_signal+0xd0> - ffffffff8104edee: movsw %ds:(%rsi),%es:(%rdi) - ffffffff8104edf0: test $0x1,%al - ffffffff8104edf2: je ffffffff8104edf5 <__dequeue_signal+0xd5> - ffffffff8104edf4: movsb %ds:(%rsi),%es:(%rdi) - ffffffff8104edf5: mov %r8,%rdi - ffffffff8104edf8: callq ffffffff8104de60 <__sigqueue_free> - -As expected, it's the "``rep movsl``" instruction from the ``memcpy()`` -that causes the warning. We know about ``REP MOVSL`` that it uses the register -``RCX`` to count the number of remaining iterations. By taking a look at the -register dump again (from the kmemcheck report), we can figure out how many -bytes were left to copy:: - - RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009 - -By looking at the disassembly, we also see that ``%ecx`` is being loaded -with the value ``$0xc`` just before (ffffffff8104edd8), so we are very -lucky. Keep in mind that this is the number of iterations, not bytes. And -since this is a "long" operation, we need to multiply by 4 to get the -number of bytes. So this means that the uninitialized value was encountered -at 4 * (0xc - 0x9) = 12 bytes from the start of the object. - -We can now try to figure out which field of the "``struct siginfo``" that -was not initialized. This is the beginning of the struct:: - - 40 typedef struct siginfo { - 41 int si_signo; - 42 int si_errno; - 43 int si_code; - 44 - 45 union { - .. - 92 } _sifields; - 93 } siginfo_t; - -On 64-bit, the int is 4 bytes long, so it must the union member that has -not been initialized. We can verify this using gdb:: - - $ gdb vmlinux - ... - (gdb) p &((struct siginfo *) 0)->_sifields - $1 = (union {...} *) 0x10 - -Actually, it seems that the union member is located at offset 0x10 -- which -means that gcc has inserted 4 bytes of padding between the members ``si_code`` -and ``_sifields``. We can now get a fuller picture of the memory dump:: - - _----------------------------=> si_code - / _--------------------=> (padding) - | / _------------=> _sifields(._kill._pid) - | | / _----=> _sifields(._kill._uid) - | | | / - -------|-------|-------|-------| - 80000000000000000000000000000000000000000088ffff0000000000000000 - i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u - -This allows us to realize another important fact: ``si_code`` contains the -value 0x80. Remember that x86 is little endian, so the first 4 bytes -"80000000" are really the number 0x00000080. With a bit of research, we -find that this is actually the constant ``SI_KERNEL`` defined in -``include/asm-generic/siginfo.h``:: - - 144 #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */ - -This macro is used in exactly one place in the x86 kernel: In ``send_signal()`` -in ``kernel/signal.c``:: - - 816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t, - 817 int group) - 818 { - ... - 828 pending = group ? &t->signal->shared_pending : &t->pending; - ... - 851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN && - 852 (is_si_special(info) || - 853 info->si_code >= 0))); - 854 if (q) { - 855 list_add_tail(&q->list, &pending->list); - 856 switch ((unsigned long) info) { - ... - 865 case (unsigned long) SEND_SIG_PRIV: - 866 q->info.si_signo = sig; - 867 q->info.si_errno = 0; - 868 q->info.si_code = SI_KERNEL; - 869 q->info.si_pid = 0; - 870 q->info.si_uid = 0; - 871 break; - ... - 890 } - -Not only does this match with the ``.si_code`` member, it also matches the place -we found earlier when looking for where siginfo_t objects are enqueued on the -``shared_pending`` list. - -So to sum up: It seems that it is the padding introduced by the compiler -between two struct fields that is uninitialized, and this gets reported when -we do a ``memcpy()`` on the struct. This means that we have identified a false -positive warning. - -Normally, kmemcheck will not report uninitialized accesses in ``memcpy()`` calls -when both the source and destination addresses are tracked. (Instead, we copy -the shadow bytemap as well). In this case, the destination address clearly -was not tracked. We can dig a little deeper into the stack trace from above:: - - arch/x86/kernel/signal.c:805 - arch/x86/kernel/signal.c:871 - arch/x86/kernel/entry_64.S:694 - -And we clearly see that the destination siginfo object is located on the -stack:: - - 782 static void do_signal(struct pt_regs *regs) - 783 { - 784 struct k_sigaction ka; - 785 siginfo_t info; - ... - 804 signr = get_signal_to_deliver(&info, &ka, regs, NULL); - ... - 854 } - -And this ``&info`` is what eventually gets passed to ``copy_siginfo()`` as the -destination argument. - -Now, even though we didn't find an actual error here, the example is still a -good one, because it shows how one would go about to find out what the report -was all about. - - -Annotating false positives -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -There are a few different ways to make annotations in the source code that -will keep kmemcheck from checking and reporting certain allocations. Here -they are: - -- ``__GFP_NOTRACK_FALSE_POSITIVE`` - This flag can be passed to ``kmalloc()`` or ``kmem_cache_alloc()`` - (therefore also to other functions that end up calling one of - these) to indicate that the allocation should not be tracked - because it would lead to a false positive report. This is a "big - hammer" way of silencing kmemcheck; after all, even if the false - positive pertains to particular field in a struct, for example, we - will now lose the ability to find (real) errors in other parts of - the same struct. - - Example:: - - /* No warnings will ever trigger on accessing any part of x */ - x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE); - -- ``kmemcheck_bitfield_begin(name)``/``kmemcheck_bitfield_end(name)`` and - ``kmemcheck_annotate_bitfield(ptr, name)`` - The first two of these three macros can be used inside struct - definitions to signal, respectively, the beginning and end of a - bitfield. Additionally, this will assign the bitfield a name, which - is given as an argument to the macros. - - Having used these markers, one can later use - kmemcheck_annotate_bitfield() at the point of allocation, to indicate - which parts of the allocation is part of a bitfield. - - Example:: - - struct foo { - int x; - - kmemcheck_bitfield_begin(flags); - int flag_a:1; - int flag_b:1; - kmemcheck_bitfield_end(flags); - - int y; - }; - - struct foo *x = kmalloc(sizeof *x); - - /* No warnings will trigger on accessing the bitfield of x */ - kmemcheck_annotate_bitfield(x, flags); - - Note that ``kmemcheck_annotate_bitfield()`` can be used even before the - return value of ``kmalloc()`` is checked -- in other words, passing NULL - as the first argument is legal (and will do nothing). - - -Reporting errors ----------------- - -As we have seen, kmemcheck will produce false positive reports. Therefore, it -is not very wise to blindly post kmemcheck warnings to mailing lists and -maintainers. Instead, I encourage maintainers and developers to find errors -in their own code. If you get a warning, you can try to work around it, try -to figure out if it's a real error or not, or simply ignore it. Most -developers know their own code and will quickly and efficiently determine the -root cause of a kmemcheck report. This is therefore also the most efficient -way to work with kmemcheck. - -That said, we (the kmemcheck maintainers) will always be on the lookout for -false positives that we can annotate and silence. So whatever you find, -please drop us a note privately! Kernel configs and steps to reproduce (if -available) are of course a great help too. - -Happy hacking! - - -Technical description ---------------------- - -kmemcheck works by marking memory pages non-present. This means that whenever -somebody attempts to access the page, a page fault is generated. The page -fault handler notices that the page was in fact only hidden, and so it calls -on the kmemcheck code to make further investigations. - -When the investigations are completed, kmemcheck "shows" the page by marking -it present (as it would be under normal circumstances). This way, the -interrupted code can continue as usual. - -But after the instruction has been executed, we should hide the page again, so -that we can catch the next access too! Now kmemcheck makes use of a debugging -feature of the processor, namely single-stepping. When the processor has -finished the one instruction that generated the memory access, a debug -exception is raised. From here, we simply hide the page again and continue -execution, this time with the single-stepping feature turned off. - -kmemcheck requires some assistance from the memory allocator in order to work. -The memory allocator needs to - - 1. Tell kmemcheck about newly allocated pages and pages that are about to - be freed. This allows kmemcheck to set up and tear down the shadow memory - for the pages in question. The shadow memory stores the status of each - byte in the allocation proper, e.g. whether it is initialized or - uninitialized. - - 2. Tell kmemcheck which parts of memory should be marked uninitialized. - There are actually a few more states, such as "not yet allocated" and - "recently freed". - -If a slab cache is set up using the SLAB_NOTRACK flag, it will never return -memory that can take page faults because of kmemcheck. - -If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still -request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags. -This does not prevent the page faults from occurring, however, but marks the -object in question as being initialized so that no warnings will ever be -produced for this object. - -Currently, the SLAB and SLUB allocators are supported by kmemcheck. diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt index 3bc7ea575564c001352b0213c735d172bc84d471..ced764a8549e9be45a71f416670e45c6006d0377 100644 --- a/Documentation/devicetree/bindings/arm/actions.txt +++ b/Documentation/devicetree/bindings/arm/actions.txt @@ -21,6 +21,7 @@ Boards: Root node property compatible must contain, depending on board: + - Cubietech CubieBoard6: "cubietech,cubieboard6" - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 4e4bc0bae597ad27b488a74c7b83762e7cb51a88..f747f47922c55dfabdf56a2ba3db6bbf1d704816 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -41,6 +41,10 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; +Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: + Required root node property: + compatible: "amlogic,a113d", "amlogic,meson-axg"; + Board compatible values (alphabetically, grouped by SoC): - "geniatech,atv1200" (Meson6) @@ -71,8 +75,12 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) + - "khadas,vim2" (Meson gxm s912) - "kingnovel,r-box-pro" (Meson gxm S912) - "nexbox,a1" (Meson gxm s912) + - "tronsmart,vega-s96" (Meson gxm s912) + + - "amlogic,s400" (Meson axg a113d) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt new file mode 100644 index 0000000000000000000000000000000000000000..101dc21014ece985dc8d33921769f0ab924023e0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt @@ -0,0 +1,20 @@ +Amlogic Meson8 and Meson8b "analog top" registers: +-------------------------------------------------- + +The analog top registers contain information about the so-called +"metal revision" (which encodes the "minor version") of the SoC. + +Required properties: +- reg: the register range of the analog top registers +- compatible: depending on the SoC this should be one of: + - "amlogic,meson8-analog-top" + - "amlogic,meson8b-analog-top" + along with "syscon" + + +Example: + + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt new file mode 100644 index 0000000000000000000000000000000000000000..7656812b67b9dbfa9b51a5d06e70274101bad1d0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/assist.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b assist registers: +----------------------------------------------- + +The assist registers contain basic information about the SoC, +for example the encoded SoC part number. + +Required properties: +- reg: the register range of the assist registers +- compatible: should be "amlogic,meson-mx-assist" along with "syscon" + + +Example: + + assist: assist@7c00 { + compatible = "amlogic,meson-mx-assist", "syscon"; + reg = <0x7c00 0x200>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt new file mode 100644 index 0000000000000000000000000000000000000000..407e27f230aba202619ffd077b8e0cf70f9ce3b0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b bootrom: +-------------------------------------- + +The bootrom register area can be used to access SoC specific +information, such as the "misc version". + +Required properties: +- reg: the register range of the bootrom registers +- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon" + + +Example: + + bootrom: bootrom@d9040000 { + compatible = "amlogic,meson-mx-bootrom", "syscon"; + reg = <0xd9040000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..72f8d08198b6fbf4b826e0457a62b84f2251879f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt @@ -0,0 +1,18 @@ +Amlogic Meson8 and Meson8b power-management-unit: +------------------------------------------------- + +The pmu is used to turn off and on different power domains of the SoCs +This includes the power to the CPU cores. + +Required node properties: +- compatible value : depending on the SoC this should be one of: + "amlogic,meson8-pmu" + "amlogic,meson8b-pmu" +- reg : physical base address and the size of the registers window + +Example: + + pmu@c81000e4 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xc81000e0 0x18>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt new file mode 100644 index 0000000000000000000000000000000000000000..3473ddaadfac2c19c8feeb603752de054d98598f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt @@ -0,0 +1,32 @@ +Amlogic Meson8 and Meson8b SRAM for smp bringup: +------------------------------------------------ + +Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores. +Once the core gets powered up it executes the code that is residing at a +specific location. + +Therefore a reserved section sub-node has to be added to the mmio-sram +declaration. + +Required sub-node properties: +- compatible : depending on the SoC this should be one of: + "amlogic,meson8-smp-sram" + "amlogic,meson8b-smp-sram" + +The rest of the properties should follow the generic mmio-sram discription +found in ../../misc/sram.txt + +Example: + + sram: sram@d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 0d0c1ae81bedfd4ae07fb746b0b51faedb589a0f..790e6b0b83065688df09bae883cdc401dc483f64 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY. Required properties: - compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v71.1" + "brcm,brcmstb-ddr-phy-v72.0" "brcm,brcmstb-ddr-phy-v225.1" "brcm,brcmstb-ddr-phy-v240.1" "brcm,brcmstb-ddr-phy-v240.2" @@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh Power-Down (SRPD), among other things. Required properties: -- compatible : should contain "brcm,brcmstb-memc-ddr" +- compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range Example: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt new file mode 100644 index 0000000000000000000000000000000000000000..a124c7fc4dcdc25b4f61925e5fd6f5e10533d89f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt @@ -0,0 +1,14 @@ +Broadcom Hurricane 2 device tree bindings +--------------------------------------- + +Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs +are based on Broadcom's iProc SoC architecture and feature a single core Cortex +A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND +flash and a PCIe attached integrated switching engine. + +Boards with Hurricane SoCs shall have the following properties: + +Required root node property: + +BCM53342 +compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index b92f12bd5244a7e6fe911f8000f7a37e499e0e40..a0009b72e9be00f767f0c338c3469bdbe685361f 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -197,6 +197,8 @@ described below. "actions,s500-smp" "allwinner,sun6i-a31" "allwinner,sun8i-a23" + "amlogic,meson8-smp" + "amlogic,meson8b-smp" "arm,realview-smp" "brcm,bcm11351-cpu-method" "brcm,bcm23550" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index cd977db7630c50a6e118e60edd96256efa138ac9..b404d592ce58a6f129b6d652482b85c2ebbab21f 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" + - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" + - "mediatek,mt7622-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt new file mode 100644 index 0000000000000000000000000000000000000000..9b8f578d5e197847c949c5d1afd86fde54d871a2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -0,0 +1,22 @@ +MediaTek AUDSYS controller +============================ + +The MediaTek AUDSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt7622-audsys", "syscon" +- #clock-cells: Must be 1 + +The AUDSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +audsys: audsys@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt index 4137196dd686fc0648d3a785c2b3462ac47c11cd..4010e37c53a0218554edfb5885262a168ba73108 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-bdpsys", "syscon" + - "mediatek,mt2712-bdpsys", "syscon" - #clock-cells: Must be 1 The bdpsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index 768f3a5bc05521a6bd3bc34e1b7311f2366e794f..7aa3fa167668f424464f8f9fe12078ea08f0bc0b 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7622-ethsys", "syscon" - #clock-cells: Must be 1 The ethsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt index beed7b594ceaab959185f97acfa6feff7a7e2e55..f5629d64cef2d2dfa218dabb7646abd50b135a08 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-hifsys", "syscon" + - "mediatek,mt7622-hifsys", "syscon" - #clock-cells: Must be 1 The hifsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 047b11ae5f45c0a7e020a231a4e87ce656b3842e..868bd51a98befcb5d901bf67995525e9dceb8173 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" + - "mediatek,mt2712-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 58d58e2006b83324502d3d39739ab6537552649b..566f153f9f83b29ef7677ea7cd8412486e4154d4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -8,7 +8,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" + - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt new file mode 100644 index 0000000000000000000000000000000000000000..2df799cd06a742a0b8d1186c296c5c8d7c618baf --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt @@ -0,0 +1,22 @@ +Mediatek jpgdecsys controller +============================ + +The Mediatek jpgdecsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2712-jpgdecsys", "syscon" +- #clock-cells: Must be 1 + +The jpgdecsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +jpgdecsys: syscon@19000000 { + compatible = "mediatek,mt2712-jpgdecsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt new file mode 100644 index 0000000000000000000000000000000000000000..b8fb03f3613e39123a1b94270850c4b481b7d172 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt @@ -0,0 +1,22 @@ +Mediatek mcucfg controller +============================ + +The Mediatek mcucfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mcucfg", "syscon" +- #clock-cells: Must be 1 + +The mcucfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mcucfg: syscon@10220000 { + compatible = "mediatek,mt2712-mcucfg", "syscon"; + reg = <0 0x10220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt new file mode 100644 index 0000000000000000000000000000000000000000..859e67b416d5006ae2851b80352e32493f9c4c7b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -0,0 +1,22 @@ +Mediatek mfgcfg controller +============================ + +The Mediatek mfgcfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mfgcfg", "syscon" +- #clock-cells: Must be 1 + +The mfgcfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mfgcfg: syscon@13000000 { + compatible = "mediatek,mt2712-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 70529e0b58e9a15927a552ada8106434c1627100..4eb8bbe15c01cd4828a75a9acb1d8913e231e515 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" + - "mediatek,mt2712-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt new file mode 100644 index 0000000000000000000000000000000000000000..d5d5f122766523a802226fe123946d4518b37d1a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -0,0 +1,22 @@ +MediaTek PCIESYS controller +============================ + +The MediaTek PCIESYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-pciesys", "syscon" +- #clock-cells: Must be 1 + +The PCIESYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +pciesys: pciesys@1a100800 { + compatible = "mediatek,mt7622-pciesys", "syscon"; + reg = <0 0x1a100800 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index e494366782aaf79e1a092be3dd701dd2c22b5a37..fb58ca8c2770b5924baf3b624fb6828260553a0d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -8,6 +8,8 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt2712-pericfg", "syscon" + - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt new file mode 100644 index 0000000000000000000000000000000000000000..d113b8e741f30aefbe67fc58b1025aaa2988b13b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -0,0 +1,22 @@ +MediaTek SGMIISYS controller +============================ + +The MediaTek SGMIISYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-sgmiisys", "syscon" +- #clock-cells: Must be 1 + +The SGMIISYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +sgmiisys: sgmiisys@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt new file mode 100644 index 0000000000000000000000000000000000000000..00760019da00c519c5e2a8795781f20fe910ee63 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -0,0 +1,22 @@ +MediaTek SSUSBSYS controller +============================ + +The MediaTek SSUSBSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-ssusbsys", "syscon" +- #clock-cells: Must be 1 + +The SSUSBSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ssusbsys: ssusbsys@1a000000 { + compatible = "mediatek,mt7622-ssusbsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index ec93ecbb9f3c2fb72bf461d8d57275d8c57ac79a..24014a7e2332370202fcbf2ffc31ede87df571f8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" + - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" + - "mediatek,mt7622-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index d150104f928a4f7c023a724a3e646eb11b49d83a..ea40d05089f8306b2b15e2b0cd304ef61b8f8602 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-vdecsys", "syscon" + - "mediatek,mt2712-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index 8a93be643647d429c39ba3c978e6e1a02f94d1c4..851545357e94af7f3ec4a96ac882cded0d166d7e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -6,6 +6,7 @@ The Mediatek vencsys controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt2712-vencsys", "syscon" - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index 3a4e5901ce31b0b8f12324f05951876fb4311c7d..ce8dabf8c0f97ce61a7c5f328acbd09c87b94a04 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-scm" "ti,omap4-scm-core" "ti,omap4-scm-padconf-core" + "ti,omap4-scm-wkup" + "ti,omap4-scm-padconf-wkup" "ti,omap5-scm-core" "ti,omap5-scm-padconf-core" "ti,dra7-scm-core" diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt index 13d755787b4fd1c7f1664692146f71451dc00648..95839e19ae9267857589a48e6c3676187ebf1677 100644 --- a/Documentation/devicetree/bindings/arm/realtek.txt +++ b/Documentation/devicetree/bindings/arm/realtek.txt @@ -12,6 +12,8 @@ Required root node properties: Root node property compatible must contain, depending on board: + - MeLE V9: "mele,v9" + - ProBox2 AVA: "probox2,ava" - Zidoo X9S: "zidoo,x9s" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index b003148e2945129ef834feacb5b198813195484e..326d24bca1a993afd724ce69720eb44814f44e68 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,5 +1,9 @@ Rockchip platforms device tree bindings --------------------------------------- +- Amarula Vyasa RK3288 board + Required root node properties: + - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; + - Asus Tinker board Required root node properties: - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index bf5fc59a693856de024df74f98e33df063640732..779f5614bceeb336cdf16352f182ad57d7fbcab7 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -4,7 +4,6 @@ Properties: - compatible : should contain two values. First value must be one from following list: - "samsung,exynos3250-pmu" - for Exynos3250 SoC, - "samsung,exynos4210-pmu" - for Exynos4210 SoC, - - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - "samsung,exynos5260-pmu" - for Exynos5260 SoC. @@ -62,7 +61,7 @@ pmu_system_controller: system-controller@10040000 { Example of clock consumer : -usb3503: usb3503@08 { +usb3503: usb3503@8 { /* ... */ clock-names = "refclk"; clocks = <&pmu_system_controller 0>; diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 3c551894f621ff67d1b441eb8292f49f787bb264..e13459618581d9cbb4c5ac7c1b6f71b701a1f116 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -57,6 +57,7 @@ Required root node properties: - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. - "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4. + - "hardkernel,odroid-hc1" - for Exynos5422-based Hardkernel Odroid HC1. * Insignal - "insignal,arndale" - for Exynos5250-based Insignal Arndale board. @@ -71,7 +72,7 @@ Optional nodes: - compatible: only "samsung,secure-firmware" is currently supported - reg: address of non-secure SYSRAM used for communication with firmware - firmware@0203F000 { + firmware@203F000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index ae75cb3b1331f82782c95a814d3a6bbda3f63857..020d758fc0c535d20d4dd74b1fc5d5998dce7225 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,6 +39,8 @@ SoCs: compatible = "renesas,r8a7795" - R-Car M3-W (R8A77960) compatible = "renesas,r8a7796" + - R-Car V3M (R8A77970) + compatible = "renesas,r8a77970" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" @@ -57,6 +59,8 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Draak (RTP0RC77995SEB0010S) compatible = "renesas,draak", "renesas,r8a77995" + - Eagle (RTP0RC77970SEB0010S) + compatible = "renesas,eagle", "renesas,r8a77970" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - GR-Peach (X28A-M01-E/F) @@ -65,7 +69,7 @@ Boards: compatible = "renesas,gose", "renesas,r8a7793" - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) - compatible = "renesas,h3ulcb", "renesas,r8a7795"; + compatible = "renesas,h3ulcb", "renesas,r8a7795" - Henninger compatible = "renesas,henninger", "renesas,r8a7791" - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) @@ -76,6 +80,8 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - Kingfisher (SBEV-RCAR-KF-M03) + compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) compatible = "renesas,koelsch", "renesas,r8a7791" - Kyoto Microcomputer Co. KZM-A9-Dual @@ -85,7 +91,7 @@ Boards: - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) - compatible = "renesas,m3ulcb", "renesas,r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796" - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) @@ -93,11 +99,11 @@ Boards: - RSKRZA1 (YR0K77210C000BE) compatible = "renesas,rskrza1", "renesas,r7s72100" - Salvator-X (RTP0RC7795SIPB0010S) - compatible = "renesas,salvator-x", "renesas,r8a7795"; + compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) - compatible = "renesas,salvator-x", "renesas,r8a7796"; + compatible = "renesas,salvator-x", "renesas,r8a7796" - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7795"; + compatible = "renesas,salvator-xs", "renesas,r8a7795" - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" - SK-RZG1E (YR8A77450S000BE) diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt index 6808fb5dee40d4b8fbcfadc26ba8362b420dd334..1b2ab1ff5587f0f01c6755238802cff157f4881c 100644 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ b/Documentation/devicetree/bindings/arm/sp810.txt @@ -33,7 +33,7 @@ Required properties: property with the highest frequency Example: - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..93372f2a7df92c1f7e957b549916b52505d6e710 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spe-pmu.txt @@ -0,0 +1,20 @@ +* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) + +ARMv8.2 introduces the optional Statistical Profiling Extension for collecting +performance sample data using an in-memory trace buffer. + +** SPE Required properties: + +- compatible : should be one of: + "arm,statistical-profiling-extension-v1" + +- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where + SPE is only supported on a subset of the CPUs, please consult + the arm,gic-v3 binding for details on describing a PPI partition. + +** Example: + +spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = ; +}; diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index d2c46449b4eb39fd57c75778eb2f62a080725260..e4beec3d9ad35710f6a44dec6f227dcf4b9f1622 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,6 +14,8 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 + allwinner-sun8i-r40 + allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 nextthing,gr8 diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 00318d083c9e29e0d5ee06376d9e955f34578c8f..50095802fb4accd2113870807d5edd7efa4853d1 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -37,7 +37,7 @@ Example: compatible = "arm,vexpress-sysreg"; reg = <0x10000000 0x1000>; - v2m_led_gpios: sys_led@08 { + v2m_led_gpios: sys_led@8 { compatible = "arm,vexpress-sysreg,sys_led"; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt index 7ca8b976c13a65aa609f07f86ffc8d3f85f258f0..7561cc4de371444ac4254e6848d5febb1b6fda45 100644 --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt @@ -5,6 +5,36 @@ Required properties: - compatible: Compatibility string. Must be 'ceva,ahci-1v84'. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding. + - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0. + - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-cominit-params = /bits/ 8 ; + CINMP : COMINIT Negate Minimum Period. + CIBGN : COMINIT Burst Gap Nominal. + CIBGMX: COMINIT Burst Gap Maximum. + CIBGMN: COMINIT Burst Gap Minimum. + - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0. + - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-comwake-params = /bits/ 8 ; + CWBGMN: COMWAKE Burst Gap Minimum. + CWBGMX: COMWAKE Burst Gap Maximum. + CWBGN: COMWAKE Burst Gap Nominal. + CWNMP: COMWAKE Negate Minimum Period. + - ceva,p0-burst-params: Burst timing value for COM parameter for port 0. + - ceva,p1-burst-params: Burst timing value for COM parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-burst-params = /bits/ 8 ; + BMX: COM Burst Maximum. + BNM: COM Burst Nominal. + SFD: Signal Failure Detection value. + PTST: Partial to Slumber timer value. + - ceva,p0-retry-params: Retry interval timing value for port 0. + - ceva,p1-retry-params: Retry interval timing value for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-retry-params = /bits/ 16 ; + RIT: Retry Interval Timer. + RCT: Rate Change Timer. Optional properties: - ceva,broken-gen2: limit to gen1 speed instead of gen2. @@ -16,5 +46,14 @@ Examples: interrupt-parent = <&gic>; interrupts = <0 133 4>; clocks = <&clkc SATA_CLK_ID>; + ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; + + ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; ceva,broken-gen2; }; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index fedc213b5f1ad6816c54df22e6d1bcbc020d2e8f..c760ecb8138136085eead51ab07c38074d989c4a 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -56,7 +56,7 @@ Examples: interrupts = <115>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = <56>; diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt index fa511db18408e5a9382fb6dd2eb59965a9f51cdb..a3d14719e478ad865c0a032a5ae5f01b979598d5 100644 --- a/Documentation/devicetree/bindings/ata/imx-sata.txt +++ b/Documentation/devicetree/bindings/ata/imx-sata.txt @@ -25,7 +25,7 @@ Optional properties: Examples: -sata@02200000 { +sata@2200000 { compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 6630d842c7a3716abde1bc4f6e4706b9a2ad466c..683eaf3aed795c74a72348c6eee9ed924553c1e8 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -61,7 +61,7 @@ Timing property for child nodes. It is mandatory, not optional. Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: - weim: weim@021b8000 { + weim: weim@21b8000 { compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; clocks = <&clks 196>; diff --git a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt index 3dd28343b6ce11bbf5f6aac66ac9b45ce0291af7..eb3ed628c6f1a1b8894c392db472354f78a75bff 100644 --- a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt +++ b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt @@ -28,7 +28,7 @@ which can normally be found in the datasheet. Example: - rsb@01f03400 { + rsb@1f03400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt new file mode 100644 index 0000000000000000000000000000000000000000..fb1790e39398a0eaa27f49792c6507d5ea2570f4 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -0,0 +1,93 @@ +Texas Instruments sysc interconnect target module wrapper binding + +Texas Instruments SoCs can have a generic interconnect target module +hardware for devices connected to various interconnects such as L3 +interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc +is mostly used for interaction between module and PRCM. It participates +in the OCP Disconnect Protocol but other than that is mostly independent +of the interconnect. + +Each interconnect target module can have one or more devices connected to +it. There is a set of control registers for managing interconnect target +module clocks, idle modes and interconnect level resets for the module. + +These control registers are sprinkled into the unused register address +space of the first child device IP block managed by the interconnect +target module and typically are named REVISION, SYSCONFIG and SYSSTATUS. + +Required standard properties: + +- compatible shall be one of the following generic types: + + "ti,sysc-omap2" + "ti,sysc-omap4" + "ti,sysc-omap4-simple" + + or one of the following derivative types for hardware + needing special workarounds: + + "ti,sysc-omap3430-sr" + "ti,sysc-omap3630-sr" + "ti,sysc-omap4-sr" + "ti,sysc-omap3-sham" + "ti,sysc-omap-aes" + "ti,sysc-mcasp" + "ti,sysc-usb-host-fs" + +- reg shall have register areas implemented for the interconnect + target module in question such as revision, sysc and syss + +- reg-names shall contain the register names implemented for the + interconnect target module in question such as + "rev, "sysc", and "syss" + +- ranges shall contain the interconnect target module IO range + available for one or more child device IP blocks managed + by the interconnect target module, the ranges may include + multiple ranges such as device L4 range for control and + parent L3 range for DMA access + +Optional properties: + +- clocks clock specifier for each name in the clock-names as + specified in the binding documentation for ti-clkctrl, + typically available for all interconnect targets on TI SoCs + based on omap4 except if it's read-only register in hwauto + mode as for example omap4 L4_CFG_CLKCTRL + +- clock-names should contain at least "fck", and optionally also "ick" + depending on the SoC and the interconnect target module + +- ti,hwmods optional TI interconnect module name to use legacy + hwmod platform data + + +Example: Single instance of MUSB controller on omap4 using interconnect ranges +using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2b000 0x1000>; + + usb_otg_hs: otg@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = , + ; + usb-phy = <&usb2_phy>; + ... + }; + }; + +Note that other SoCs, such as am335x can have multipe child devices. On am335x +there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA +instance as children of a single interconnet target module. diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt new file mode 100644 index 0000000000000000000000000000000000000000..2a10d065b9fab703e05bed7c7e012072cdab1574 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt @@ -0,0 +1,50 @@ +Technologic Systems NBUS + +The NBUS is a bus used to interface with peripherals in the Technologic +Systems FPGA on the TS-4600 SoM. + +Required properties : + - compatible : "technologic,ts-nbus" + - #address-cells : must be 1 + - #size-cells : must be 0 + - pwms : The PWM bound to the FPGA + - ts,data-gpios : The 8 GPIO pins connected to the data lines on the FPGA + - ts,csn-gpios : The GPIO pin connected to the csn line on the FPGA + - ts,txrx-gpios : The GPIO pin connected to the txrx line on the FPGA + - ts,strobe-gpios : The GPIO pin connected to the stobe line on the FPGA + - ts,ale-gpios : The GPIO pin connected to the ale line on the FPGA + - ts,rdy-gpios : The GPIO pin connected to the rdy line on the FPGA + +Child nodes: + +The NBUS node can contain zero or more child nodes representing peripherals +on the bus. + +Example: + + nbus { + compatible = "technologic,ts-nbus"; + pinctrl-0 = <&nbus_pins>; + #address-cells = <1>; + #size-cells = <0>; + pwms = <&pwm 2 83>; + ts,data-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH + &gpio0 1 GPIO_ACTIVE_HIGH + &gpio0 2 GPIO_ACTIVE_HIGH + &gpio0 3 GPIO_ACTIVE_HIGH + &gpio0 4 GPIO_ACTIVE_HIGH + &gpio0 5 GPIO_ACTIVE_HIGH + &gpio0 6 GPIO_ACTIVE_HIGH + &gpio0 7 GPIO_ACTIVE_HIGH>; + ts,csn-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + ts,txrx-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + ts,ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + ts,rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + + watchdog@2a { + compatible = "..."; + + /* ... */ + }; + }; diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt index 27468119fd94c496ce5647361b6d20ef6ac0a4e6..4cd81742038f1230e2e68d4d6b6c365abe0b1025 100644 --- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt +++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt @@ -59,7 +59,7 @@ syscon: syscon@10000000 { compatible = "syscon"; reg = <0x10000000 0x1000>; - oscclk0: osc0@0c { + oscclk0: osc0@c { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index f2c5f0e4a363a5f247ccda48cc45d7a96f74362a..f8e4a93466cbfc8d5e7f1f11e89424843965fc6c 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -137,6 +137,20 @@ These clock IDs are defined in: ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 +Hurricane 2 +------ +PLL and leaf clock compatible strings for Hurricane 2 are: + "brcm,hr2-armpll" + +The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + Northstar and Northstar Plus ------ PLL and leaf clock compatible strings for Northstar and Northstar Plus are: diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 0c3d6015868d94d460bcadc4648a43560c5ad27d..6030afb10b5c15558dfd27ed40f55d4f12171ec6 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -33,6 +33,12 @@ Required Properties: - clock-names: Aliases for the above clocks. They should be "pll_ref", "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. +Optional Properties: + + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. Some of the clocks are available only on a particular @@ -80,7 +86,7 @@ Example 3: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,i2s-v5"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt index 4fc869b69d4ac065da2b23c3f0ec2c90fec69c3a..f6272dcd96f404095e35c854e531d8a6a58b7583 100644 --- a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt @@ -43,7 +43,7 @@ Example: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { /* ... */ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt index e3eb0f657c5ea8f72088456e84cba8355a55955d..217871f483c0bab75f4ebdffdddd19643bfa297a 100644 --- a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt +++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt @@ -21,7 +21,7 @@ Required properties: a size of 8. - #clock-cells : from common clock binding; shall be set to 1 -divider_clk: core-clock@0064 { +divider_clk: core-clock@64 { compatible = "marvell,dove-divider-clock"; reg = <0x0064 0x8>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index f5a5b19ed3b23bfd11631b9c14641e2ba3c484e3..bc61c952cb0b7221ccd47c099199d06598daf91e 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -41,3 +41,46 @@ Example 2: UART controller node that consumes the clock generated by the clock clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; + +Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP) +subsystem. Registers for those clocks are located in the ISP power domain. +Because those registers are also located in a different memory region than +the main clock controller, a separate clock controller has to be defined for +handling them. + +Required Properties: + +- compatible: should be "samsung,exynos4412-isp-clock". + +- reg: physical base address of the ISP clock controller and length of memory + mapped region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings, should point to CLK_ACLK200 and + CLK_ACLK400_MCUISP clocks from the main clock controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt, should be "aclk200" and + "aclk400_mcuisp". + +- power-domains: a phandle to ISP power domain node as described by + generic PM domain bindings. + +Example 3: The clock controllers bindings for Exynos4412 SoCs. + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index fe885abc9cb44874b2e7b7d42d6118a7a0828533..c473dd38dd550ccc03d9fc219095dc9257007376 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -168,6 +168,11 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 +Optional properties: + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; }; Example 3: UART controller node that consumes the clock generated by the clock diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt index b7adf4e3ea987b3aad8919e8ab4f5e4efef34b9a..9823baf7acb645c8be7de75e37307af6a3cbc29c 100644 --- a/Documentation/devicetree/bindings/clock/imx1-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt @@ -10,13 +10,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h for the full list of i.MX1 clock IDs. Examples: - clks: ccm@0021b000 { + clks: ccm@21b000 { #clock-cells = <1>; compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; }; - pwm: pwm@00208000 { + pwm: pwm@208000 { #pwm-cells = <2>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index aa0a4d423ef58d83e4107538779fa237d5eee27e..a45ca67a9d5f26f72844e9cee49ffd434f9cd9c4 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -14,14 +14,14 @@ Examples: #include -clks: ccm@020c4000 { +clks: ccm@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; #clock-cells = <1>; }; -uart1: serial@02020000 { +uart1: serial@2020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 8398a3a5e106e80d813d04cffda6c11283d7b0d0..3472b461ca9354c6dda17b585dfeb6a0ec202375 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -46,7 +46,7 @@ Example: /* ... */ Node of the MFD chip - max77686: max77686@09 { + max77686: max77686@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; @@ -71,7 +71,7 @@ Example: /* ... */ Node of the MFD chip - max77802: max77802@09 { + max77802: max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index a7235e9e1c97d38fdc9ff95a036c403dfb583b28..4491d1c104aacd3b41e73856338c81afc9722f36 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -10,12 +10,23 @@ Required properties : - compatible : shall contain only one of the following. The generic compatible "qcom,rpmcc" should be also included. + "qcom,rpmcc-msm8660", "qcom,rpmcc" + "qcom,rpmcc-apq8060", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-msm8996", "qcom,rpmcc" - #clock-cells : shall contain 1 +The clock enumerators are defined in +and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock +is an "active" clock, which means that the consumer only care that the +clock is available when the apps CPU subsystem is active, i.e. not +suspended or in deep idle. If it is important that the clock keeps running +during system suspend, you need to specify the non-active clock, the one +not containing *_A_* in the enumerator name. + Example: smd { compatible = "qcom,smd"; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 316e136865688b7c4fe0c6f1d7b23934d66634d1..f1890d0777a6cc25462d308311b5722a19c21c4d 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -22,6 +22,7 @@ Required Properties: - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) + - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - reg: Base address and length of the memory resource used by the CPG/MSSR @@ -31,8 +32,8 @@ Required Properties: clock-names - clock-names: List of external parent clock names. Valid names are: - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, - r8a7795, r8a7796, r8a77995) - - "extalr" (r8a7795, r8a7796) + r8a7795, r8a7796, r8a77970, r8a77995) + - "extalr" (r8a7795, r8a7796, r8a77970) - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb5d942075fbf0bf18fb9d924f34e3508fcf4298..8ff3e2774ed8d1d0fd46cbf5895346f62252c5b0 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -1,6 +1,6 @@ -* Renesas RZ Clock Pulse Generator (CPG) +* Renesas RZ/A1 Clock Pulse Generator (CPG) -The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable +The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable CPU and GPU clocks, and several fixed ratio dividers. The CPG also provides a Clock Domain for SoC devices, in combination with the CPG Module Stop (MSTP) Clocks. diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index c35390f605453c98662deda5a2a3dd7f85547682..7364953d0d0bd8c22699366a50981bef3adb5386 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -42,7 +42,7 @@ Required properties: Example: - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 7eda08eb8a1e336cf0756baa62a91f21fd58bce6..4ca21c3a6fc926d602460421264023670ffe1e52 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -36,7 +36,7 @@ For the PRCM CCUs on A83T/H3/A64, two more clocks are needed: - "iosc": the SoC's internal frequency oscillator Example for generic CCU: -ccu: clock@01c20000 { +ccu: clock@1c20000 { compatible = "allwinner,sun8i-h3-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -46,7 +46,7 @@ ccu: clock@01c20000 { }; Example for PRCM CCU: -r_ccu: clock@01f01400 { +r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 8f7619d8c8d8184f9494e1bb3ca6fb9536490d89..1a042e20b115fa785f50b0f5841f5425de65f39f 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -137,7 +137,7 @@ the address block, which is related to the overall mmc block. For example: -osc24M: clk@01c20050 { +osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-osc-clk"; reg = <0x01c20050 0x4>; @@ -145,7 +145,7 @@ osc24M: clk@01c20050 { clock-output-names = "osc24M"; }; -pll1: clk@01c20000 { +pll1: clk@1c20000 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; reg = <0x01c20000 0x4>; @@ -153,7 +153,7 @@ pll1: clk@01c20000 { clock-output-names = "pll1"; }; -pll5: clk@01c20020 { +pll5: clk@1c20020 { #clock-cells = <1>; compatible = "allwinner,sun4i-pll5-clk"; reg = <0x01c20020 0x4>; @@ -161,7 +161,7 @@ pll5: clk@01c20020 { clock-output-names = "pll5_ddr", "pll5_other"; }; -pll6: clk@01c20028 { +pll6: clk@1c20028 { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; @@ -169,7 +169,7 @@ pll6: clk@01c20028 { clock-output-names = "pll6", "pll6x2"; }; -cpu: cpu@01c20054 { +cpu: cpu@1c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; reg = <0x01c20054 0x4>; @@ -177,7 +177,7 @@ cpu: cpu@01c20054 { clock-output-names = "cpu"; }; -mmc0_clk: clk@01c20088 { +mmc0_clk: clk@1c20088 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; @@ -199,7 +199,7 @@ gmac_int_tx_clk: clk@3 { clock-output-names = "gmac_int_tx"; }; -gmac_clk: clk@01c20164 { +gmac_clk: clk@1c20164 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c20164 0x4>; @@ -211,7 +211,7 @@ gmac_clk: clk@01c20164 { clock-output-names = "gmac"; }; -mmc_config_clk: clk@01c13000 { +mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ahb0_gates 8>; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt index 616836e7e1e2561e224a711b46a4a7cff1c6adc6..959d96632f5d20496285cadcb0da4d1253145b0c 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce706.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt @@ -25,7 +25,7 @@ Example: }; }; ... - i2c0: i2c-master@0d090000 { + i2c0: i2c-master@d090000 { ... cdce706: clock-synth@69 { compatible = "ti,cdce706"; diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt index 697714f8d75cde0f759fad65f4da217b03598c1d..a3448bfa1c827971f6d0e9c33e31c7636a0ce1b9 100644 --- a/Documentation/devicetree/bindings/common-properties.txt +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -1,4 +1,8 @@ Common properties +================= + +Endianness +---------- The Devicetree Specification does not define any properties related to hardware byteswapping, but endianness issues show up frequently in porting Linux to @@ -58,3 +62,25 @@ dev: dev@40031000 { ... little-endian; }; + +Daisy-chained devices +--------------------- + +Many serially-attached GPIO and IIO devices are daisy-chainable. To the +host controller, a daisy-chain appears as a single device, but the number +of inputs and outputs it provides is the sum of inputs and outputs provided +by all of its devices. The driver needs to know how many devices the +daisy-chain comprises to determine the amount of data exchanged, how many +inputs and outputs to register and so on. + +Optional properties: + - #daisy-chained-devices: Number of devices in the daisy-chain (default is 1). + +Example: +gpio@0 { + compatible = "name"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + #daisy-chained-devices = <3>; +}; diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt similarity index 100% rename from Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt rename to Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt index 5d38e9b7033f00942367232ef64b1eb81584b188..f2dc3d9bca9204edd46777100064f8ce034ebafc 100644 --- a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt +++ b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt @@ -14,7 +14,7 @@ Optional properties: - reset-names : must contain "ahb" Example: - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 06668bca7ffcd9385a08b9d1ed80a4321bf83ab5..0047b1394c704d5ad4e558f8373b5b6f5ea7972b 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -68,6 +68,8 @@ Optional properties: - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing generator. The chip will rely on the sync signals in the DSI data lanes, rather than generate its own timings for HDMI output. +- clocks: from common clock binding: reference to the CEC clock. +- clock-names: from common clock binding: must be "cec". Required nodes: @@ -89,6 +91,8 @@ Example reg = <39>; interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index b1a8929c2536cc324a1d34073dabc2fe2ddf53cf..3a72a103a18a8c40d1f09957123d6240d5685c8f 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -37,7 +37,7 @@ Optional properties: Example: - hdmi0: hdmi0@fead0000 { + hdmi0: hdmi@fead0000 { compatible = "renesas,r8a7795-dw-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file mode 100644 index 0000000000000000000000000000000000000000..88041ba23d56c9f8972078b35c59c9d6c68553f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt @@ -0,0 +1,49 @@ +Silicon Image SiI9234 HDMI/MHL bridge bindings + +Required properties: + - compatible : "sil,sii9234". + - reg : I2C address for TPI interface, use 0x39 + - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) + - iovcc18-supply : I/O Supply Voltage (1.8V) + - avcc12-supply : TMDS Analog Supply Voltage (1.2V) + - cvcc12-supply : Digital Core Supply Voltage (1.2V) + - interrupts, interrupt-parent: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin (active low) + - video interfaces: Device node can contain two video interface port + nodes for HDMI encoder and connector according to [1]. + - port@0 - MHL to HDMI + - port@1 - MHL to connector + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + + +Example: + sii9234@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt index ed5e0a7894adc29b0efecc5b72f7e5faa1ea2f58..05176f1ae1080303ff05cd0e14c0c86b6c814f3d 100644 --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt @@ -42,7 +42,7 @@ Optional properties: example: -gpu_3d: gpu@00130000 { +gpu_3d: gpu@130000 { compatible = "vivante,gc"; reg = <0x00130000 0x4000>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt new file mode 100644 index 0000000000000000000000000000000000000000..82e3bc0b7485a098def2f449f7fecdede66658a4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt @@ -0,0 +1,54 @@ +* Faraday TV Encoder TVE200 + +Required properties: + +- compatible: must be one of: + "faraday,tve200" + "cortina,gemini-tvc", "faraday,tve200" + +- reg: base address and size of the control registers block + +- interrupts: contains an interrupt specifier for the interrupt + line from the TVE200 + +- clock-names: should contain "PCLK" for the clock line clocking the + silicon and "TVE" for the 27MHz clock to the video driver + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: + +- resets: contains the reset line phandle for the block + +Required sub-nodes: + +- port: describes LCD panel signals, following the common binding + for video transmitter interfaces; see + Documentation/devicetree/bindings/media/video-interfaces.txt + This port should have the properties: + reg = <0>; + It should have one endpoint connected to a remote endpoint where + the display is connected. + +Example: + +display-controller@6a000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port@0 { + reg = <0>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/google,goldfish-fb.txt b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt new file mode 100644 index 0000000000000000000000000000000000000000..751fa9f51e5d4fab3235af5ab14f0d80af0a59de --- /dev/null +++ b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt @@ -0,0 +1,17 @@ +Android Goldfish framebuffer + +Android Goldfish framebuffer device used by Android emulator. + +Required properties: + +- compatible : should contain "google,goldfish-fb" +- reg : +- interrupts : + +Example: + + display-controller@1f008000 { + compatible = "google,goldfish-fb"; + interrupts = <0x10>; + reg = <0x1f008000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt index 66a8f86e5d122ba7e46ea17840ca7a4b0366c3cd..6d021e71c9cf1d745a04e068a4f90b8b117d3921 100644 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -32,11 +32,11 @@ Optional properties Example: - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { /* ... */ }; - hdmi: hdmi@0120000 { + hdmi: hdmi@120000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-hdmi"; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index fa00e62e1cf6983874207b30095b0451e8ef4334..a6671bd2c85ab47116a9862d7e51c8050d1c8e02 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -13,16 +13,16 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. - clock-names: the following clocks are required: - * "mdp_core_clk" - * "iface_clk" - * "bus_clk" - * "core_mmss_clk" - * "byte_clk" - * "pixel_clk" - * "core_clk" + * "mdp_core" + * "iface" + * "bus" + * "core_mmss" + * "byte" + * "pixel" + * "core" For DSIv2, we need an additional clock: - * "src_clk" -- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform. + * "src" +- assigned-clocks: Parents of "byte" and "pixel" for the given platform. - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. See [1] for details on clock bindings. - vdd-supply: phandle to vdd regulator device node @@ -101,7 +101,7 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: - * "iface_clk" + * "iface" - vddio-supply: phandle to vdd-io regulator device node Optional properties: @@ -123,13 +123,13 @@ Example: reg = <0xfd922800 0x200>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "bus_clk", - "byte_clk", - "core_clk", - "core_mmss_clk", - "iface_clk", - "mdp_core_clk", - "pixel_clk"; + "bus", + "byte", + "core", + "core_mmss", + "iface", + "mdp_core", + "pixel"; clocks = <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -207,7 +207,7 @@ Example: reg = <0xfd922a00 0xd4>, <0xfd922b00 0x2b0>, <0xfd922d80 0x7b>; - clock-names = "iface_clk"; + clock-names = "iface"; clocks = <&mmcc MDSS_AHB_CLK>; #clock-cells = <1>; vddio-supply = <&pma8084_l12>; diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt index e63032be540114833bdcc48cf86afd4d82f3f63a..95ce19ca7bc524240a223b7a5be416dab61a7f85 100644 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ b/Documentation/devicetree/bindings/display/msm/edp.txt @@ -12,11 +12,11 @@ Required properties: - clocks: device clocks See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "mdp_core_clk" - * "pixel_clk" - * "link_clk" + * "core" + * "iface" + * "mdp_core" + * "pixel" + * "link" - #clock-cells: The value should be 1. - vdda-supply: phandle to vdda regulator device node - lvl-vdd-supply: phandle to regulator device node which is used to supply power @@ -41,11 +41,11 @@ Example: interrupts = <12 0>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "pixel_clk", - "iface_clk", - "link_clk", - "mdp_core_clk"; + "core", + "pixel", + "iface", + "link", + "mdp_core"; clocks = <&mmcc MDSS_EDPAUX_CLK>, <&mmcc MDSS_EDPPIXEL_CLK>, diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt index 2d306f402d18c9f38d41d29e6581e9e1793c9037..5f90a40da51b2f0c96273c5afeec3e2bce6d485a 100644 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -64,9 +64,9 @@ Example: interrupts = ; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "master_iface_clk", - "slave_iface_clk"; + "core", + "master_iface", + "slave_iface"; clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, @@ -92,7 +92,7 @@ Example: <0x4a00500 0x100>; #phy-cells = <0>; power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; clocks = <&mmcc HDMI_S_AHB_CLK>; core-vdda-supply = <&pm8921_hdmi_mvs>; }; diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 30c11ea837542cde1eab65a739dca1597b2c42fe..1b31977a68ba8ba8435b16d2f58e73dcd73ed879 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -22,16 +22,16 @@ Required properties: Documentation/devicetree/bindings/power/power_domain.txt - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. - * "iface_clk" - * "bus_clk" - * "vsync_clk" + * "iface" + * "bus" + * "vsync" - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" MDP5: Required properties: @@ -45,10 +45,10 @@ Required properties: through MDP block - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. -- * "bus_clk" -- * "iface_clk" -- * "core_clk" -- * "vsync_clk" +- * "bus" +- * "iface" +- * "core" +- * "vsync" - ports: contains the list of output ports from MDP. These connect to interfaces that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a special case since it is a part of the MDP block itself). @@ -77,7 +77,7 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" Example: @@ -95,9 +95,9 @@ Example: clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "vsync_clk" + clock-names = "iface", + "bus", + "vsync" interrupts = <0 72 0>; @@ -120,10 +120,10 @@ Example: <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "vsync"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt new file mode 100644 index 0000000000000000000000000000000000000000..6862028e7b2ecd9b1ef65079b02fc790ef412f3d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt @@ -0,0 +1,21 @@ +Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using +a MIPI-DSI video interface. Its backlight is managed through the DSI link. + +Required properties: + - compatible: "orisetech,otm8009a" + - reg: the virtual channel number of a DSI peripheral + +Optional properties: + - reset-gpios: a GPIO spec for the reset pin (active low). + +Example: +&dsi { + ... + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 0000000000000000000000000000000000000000..e9e19c059260d6d8f33acf4113197eab209011ba --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt new file mode 100644 index 0000000000000000000000000000000000000000..3f1a8392af7ff1797fff844233ab363233fc3a06 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt @@ -0,0 +1,24 @@ +Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode) + +Required properties: + - compatible: "samsung,s6e63j0x03" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - te-gpios: a GPIO spec for the tearing effect synchronization signal + gpio pin (active high) + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt new file mode 100644 index 0000000000000000000000000000000000000000..aae57ef36cdd237a4463a9c0877ffe04ba062445 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt @@ -0,0 +1,23 @@ +Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel + +Required properties: +- compatible: should be "sii,43wvf1g". +- "dvdd-supply": 3v3 digital regulator. +- "avdd-supply": 5v analog regulator. + +Optional properties: +- backlight: phandle for the backlight control. + +Example: + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt new file mode 100644 index 0000000000000000000000000000000000000000..4c0caaf246c911da3b2da69403248d04d3389a27 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt @@ -0,0 +1,8 @@ +Toshiba 8.9" WXGA (1280x768) TFT LCD panel + +Required properties: +- compatible: should be "toshiba,lt089ac29000.txt" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt new file mode 100644 index 0000000000000000000000000000000000000000..da6939efdb43a47039e63be0634894228b17fc94 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -0,0 +1,99 @@ +Rockchip RK3288 LVDS interface +================================ + +Required properties: +- compatible: matching the soc type, one of + - "rockchip,rk3288-lvds"; + +- reg: physical base address of the controller and length + of memory mapped region. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: must contain "pclk_lvds" + +- avdd1v0-supply: regulator phandle for 1.0V analog power +- avdd1v8-supply: regulator phandle for 1.8V analog power +- avdd3v3-supply: regulator phandle for 3.3V analog power + +- rockchip,grf: phandle to the general register files syscon +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface + +Optional properties: +- pinctrl-names: must contain a "lcdc" entry. +- pinctrl-0: pin control group to be used for this controller. + +Required nodes: + +The lvds has two video ports as described by + Documentation/devicetree/bindings/media/video-interfaces.txt +Their connections are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +the lvds panel described by + Documentation/devicetree/bindings/display/panel/simple-panel.txt + +Panel required properties: +- ports for remote LVDS output + +Panel optional properties: +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". +This describes decribed by: + Documentation/devicetree/bindings/display/panel/panel-lvds.txt + +Example: + +lvds_panel: lvds-panel { + compatible = "auo,b101ean01"; + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; + data-mapping = "jeida-24"; + + ports { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; +}; + +For Rockchip RK3288: + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + rockchip,grf = <&grf>; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + rockchip,output = "rgb"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt index 8c9e9f515c8754dfd36f7503cfbe797065bda1ca..5a9ce511be88c69f27aad155a6e6ffebc26e033e 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt @@ -78,7 +78,7 @@ chosen { stdout-path = "display0"; }; -soc@01c00000 { +soc@1c00000 { lcdc0: lcdc@1c0c000 { compatible = "allwinner,sun4i-a10-lcdc"; ... diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 92441086cabad07cb9bfe44095cfbd605ef03e38..50cc72ee11689ccc99f54252b0c1a442362b9569 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -40,15 +40,19 @@ CEC. It is one end of the pipeline. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-hdmi * allwinner,sun5i-a10s-hdmi + * allwinner,sun6i-a31-hdmi - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the HDMI encoder * ahb: the HDMI interface clock * mod: the HDMI module clock + * ddc: the HDMI ddc clock (A31 only) * pll-0: the first video PLL * pll-1: the second video PLL - clock-names: the clock names mentioned above + - resets: phandle to the reset control for the HDMI encoder (A31 only) - dmas: phandles to the DMA channels used by the HDMI encoder * ddc-tx: The channel for DDC transmission * ddc-rx: The channel for DDC reception @@ -83,9 +87,11 @@ The TCON acts as a timing controller for RGB, LVDS and TV interfaces. Required properties: - compatible: value must be either: + * allwinner,sun4i-a10-tcon * allwinner,sun5i-a13-tcon * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon + * allwinner,sun7i-a20-tcon * allwinner,sun8i-a33-tcon * allwinner,sun8i-v3s-tcon - reg: base address and size of memory-mapped region @@ -150,8 +156,10 @@ system. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-backend * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend + * allwinner,sun7i-a20-display-backend * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -182,8 +190,10 @@ deinterlacing and color space conversion. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-frontend * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend + * allwinner,sun7i-a20-display-frontend * allwinner,sun8i-a33-display-frontend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -228,10 +238,12 @@ extra node. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-engine * allwinner,sun5i-a10s-display-engine * allwinner,sun5i-a13-display-engine * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine + * allwinner,sun7i-a20-display-engine * allwinner,sun8i-a33-display-engine * allwinner,sun8i-v3s-display-engine @@ -266,7 +278,7 @@ connector { }; }; -hdmi: hdmi@01c16000 { +hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; interrupts = <58>; @@ -305,7 +317,7 @@ hdmi: hdmi@01c16000 { }; }; -tve0: tv-encoder@01c0a000 { +tve0: tv-encoder@1c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; clocks = <&ahb_gates 34>; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 74e1e8add5a1264bfc2ed8db1b26667ed8906903..844e0103fb0dac15220794cfde75f6d58b2c4d73 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -3,6 +3,10 @@ NVIDIA Tegra host1x Required properties: - compatible: "nvidia,tegra-host1x" - reg: Physical base address and length of the controller's registers. + For pre-Tegra186, one entry describing the whole register area. + For Tegra186, one entry for each entry in reg-names: + "vm" - VM region assigned to Linux + "hypervisor" - Hypervisor region (only if Linux acts as hypervisor) - interrupts: The interrupt outputs from the controller. - #address-cells: The number of cells used to represent physical base addresses in the host1x address space. Should be 1. diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index 1be6941ac1e514cfd31ea0f6d4a44baaed5a7db2..f3d1f151ba80a45e40e0c1d97535ad8e20af296e 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -3,6 +3,8 @@ Required Properties: -compatible: "renesas,-usb-dmac", "renesas,usb-dmac" as fallback. Examples with soctypes are: + - "renesas,r8a7743-usb-dmac" (RZ/G1M) + - "renesas,r8a7745-usb-dmac" (RZ/G1E) - "renesas,r8a7790-usb-dmac" (R-Car H2) - "renesas,r8a7791-usb-dmac" (R-Car M2-W) - "renesas,r8a7793-usb-dmac" (R-Car M2-N) diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt new file mode 100644 index 0000000000000000000000000000000000000000..7a10fea2e51bdfd1f2d7578781a07d701d3496c9 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt @@ -0,0 +1,41 @@ +* Spreadtrum DMA controller + +This binding follows the generic DMA bindings defined in dma.txt. + +Required properties: +- compatible: Should be "sprd,sc9860-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain one interrupt shared by all channel. +- #dma-cells: must be <1>. Used to represent the number of integer + cells in the dmas property of client device. +- #dma-channels : Number of DMA channels supported. Should be 32. +- clock-names: Should contain the clock of the DMA controller. +- clocks: Should contain a clock specifier for each entry in clock-names. + +Example: + +Controller: +apdma: dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0x20100000 0x4000>; + interrupts = ; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable"; + clocks = <&clk_ap_ahb_gates 5>; +}; + + +Client: +DMA clients connected to the Spreadtrum DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each channel. +The two cells in order are: +1. A phandle pointing to the DMA controller. +2. The channel id. + +spi0: spi@70a00000{ + ... + dma-names = "rx_chn", "tx_chn"; + dmas = <&apdma 11>, <&apdma 12>; + ... +}; diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt index 4408af693d0cc75298e66c3c56af8f7521d3eb23..0b55718bf88993a83eb5091128cc6761b93e5852 100644 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -13,6 +13,7 @@ Required properties: - #dma-cells : Must be <4>. See DMA client paragraph for more details. Optional properties: +- dma-requests : Number of DMA requests supported. - resets: Reference to a reset controller asserting the DMA controller - st,mem2mem: boolean; if defined, it indicates that the controller supports memory-to-memory transfer @@ -34,12 +35,13 @@ Example: #dma-cells = <4>; st,mem2mem; resets = <&rcc 150>; + dma-requests = <8>; }; * DMA client DMA clients connected to the STM32 DMA controller must use the format -described in the dma.txt file, using a five-cell specifier for each +described in the dma.txt file, using a four-cell specifier for each channel: a phandle to the DMA controller plus the following four integer cells: 1. The channel id @@ -71,7 +73,7 @@ channel: a phandle to the DMA controller plus the following four integer cells: Example: usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&clk_pclk2>; diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt new file mode 100644 index 0000000000000000000000000000000000000000..1b893b23550720de68836883bf6025a4bf1245d8 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt @@ -0,0 +1,84 @@ +STM32 DMA MUX (DMA request router) + +Required properties: +- compatible: "st,stm32h7-dmamux" +- reg: Memory map for accessing module +- #dma-cells: Should be set to <3>. + First parameter is request line number. + Second is DMA channel configuration + Third is Fifo threshold + For more details about the three cells, please see + stm32-dma.txt documentation binding file +- dma-masters: Phandle pointing to the DMA controllers. + Several controllers are allowed. Only "st,stm32-dma" DMA + compatible are supported. + +Optional properties: +- dma-channels : Number of DMA requests supported. +- dma-requests : Number of DMAMUX requests supported. +- resets: Reference to a reset controller asserting the DMA controller +- clocks: Input clock of the DMAMUX instance. + +Example: + +/* DMA controller 1 */ +dma1: dma-controller@40020000 { + compatible = "st,stm32-dma"; + reg = <0x40020000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-channels = <8>; + dma-requests = <8>; +}; + +/* DMA controller 1 */ +dma2: dma@40020400 { + compatible = "st,stm32-dma"; + reg = <0x40020400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-channels = <8>; + dma-requests = <8>; +}; + +/* DMA mux */ +dmamux1: dma-router@40020800 { + compatible = "st,stm32h7-dmamux"; + reg = <0x40020800 0x3c>; + #dma-cells = <3>; + dma-requests = <128>; + dma-channels = <16>; + dma-masters = <&dma1 &dma2>; + clocks = <&timer_clk>; +}; + +/* DMA client */ +usart1: serial@40011000 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&timer_clk>; + dmas = <&dmamux1 41 0x414 0>, + <&dmamux1 42 0x414 0>; + dma-names = "rx", "tx"; +}; diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt new file mode 100644 index 0000000000000000000000000000000000000000..d18772d6bc6560f460f06c5072735874b9890861 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt @@ -0,0 +1,94 @@ +* STMicroelectronics STM32 MDMA controller + +The STM32 MDMA is a general-purpose direct memory access controller capable of +supporting 64 independent DMA channels with 256 HW requests. + +Required properties: +- compatible: Should be "st,stm32h7-mdma" +- reg: Should contain MDMA registers location and length. This should include + all of the per-channel registers. +- interrupts: Should contain the MDMA interrupt. +- clocks: Should contain the input clock of the DMA instance. +- resets: Reference to a reset controller asserting the DMA controller. +- #dma-cells : Must be <5>. See DMA client paragraph for more details. + +Optional properties: +- dma-channels: Number of DMA channels supported by the controller. +- dma-requests: Number of DMA request signals supported by the controller. +- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via + AHB bus. + +Example: + + mdma1: dma@52000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x52000000 0x1000>; + interrupts = <122>; + clocks = <&timer_clk>; + resets = <&rcc 992>; + #dma-cells = <5>; + dma-channels = <16>; + dma-requests = <32>; + st,ahb-addr-masks = <0x20000000>, <0x00000000>; + }; + +* DMA client + +DMA clients connected to the STM32 MDMA controller must use the format +described in the dma.txt file, using a five-cell specifier for each channel: +a phandle to the MDMA controller plus the following five integer cells: + +1. The request line number +2. The priority level + 0x00: Low + 0x01: Medium + 0x10: High + 0x11: Very high +3. A 32bit mask specifying the DMA channel configuration + -bit 0-1: Source increment mode + 0x00: Source address pointer is fixed + 0x10: Source address pointer is incremented after each data transfer + 0x11: Source address pointer is decremented after each data transfer + -bit 2-3: Destination increment mode + 0x00: Destination address pointer is fixed + 0x10: Destination address pointer is incremented after each data + transfer + 0x11: Destination address pointer is decremented after each data + transfer + -bit 8-9: Source increment offset size + 0x00: byte (8bit) + 0x01: half-word (16bit) + 0x10: word (32bit) + 0x11: double-word (64bit) + -bit 10-11: Destination increment offset size + 0x00: byte (8bit) + 0x01: half-word (16bit) + 0x10: word (32bit) + 0x11: double-word (64bit) +-bit 25-18: The number of bytes to be transferred in a single transfer + (min = 1 byte, max = 128 bytes) +-bit 29:28: Trigger Mode + 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes) + 0x01: Each MDMA request triggers a block transfer (max 64K bytes) + 0x10: Each MDMA request triggers a repeated block transfer + 0x11: Each MDMA request triggers a linked list transfer +4. A 32bit value specifying the register to be used to acknowledge the request + if no HW ack signal is used by the MDMA client +5. A 32bit mask specifying the value to be written to acknowledge the request + if no HW ack signal is used by the MDMA client + +Example: + + i2c4: i2c@5c002000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c002000 0x400>; + interrupts = <95>, + <96>; + clocks = <&timer_clk>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>, + <&mdma1 37 0x0 0x40002 0x0 0x0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt index 3b484380c56a9ff468421667d5703bb29d1dc587..8ad556aca70b56dad0177dba779fa8b8cee2c888 100644 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -12,7 +12,7 @@ Required properties: second cell holding the request line number. Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; @@ -32,7 +32,7 @@ The three cells in order are: 3. The port ID as specified in the datasheet Example: - spi2: spi@01c17000 { + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <0 12 4>; diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 98fbe1a5c6dd3d0cc366227eb2def392b797b4da..7fccc20d83311c22713370968638190720c90e1a 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -18,7 +18,7 @@ Required properties: - #dma-cells : Should be 1, a single cell holding a line request number Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; interrupts = <0 50 4>; @@ -27,6 +27,32 @@ Example: #dma-cells = <1>; }; +------------------------------------------------------------------------------ +For A64 DMA controller: + +Required properties: +- compatible: "allwinner,sun50i-a64-dma" +- dma-channels: Number of DMA channels supported by the controller. + Refer to Documentation/devicetree/bindings/dma/dma.txt +- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells + +Optional properties: +- dma-requests: Number of DMA request signals supported by the controller. + Refer to Documentation/devicetree/bindings/dma/dma.txt + +Example: + dma: dma-controller@1c02000 { + compatible = "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <8>; + dma-requests = <27>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; +------------------------------------------------------------------------------ + Clients: DMA clients connected to the A31 DMA controller must use the format @@ -38,7 +64,7 @@ The two cells in order are: 2. The port ID as specified in the datasheet Example: -spi2: spi@01c6a000 { +spi2: spi@1c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = <0 67 4>; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 41f0c1a07c562b754fd2324d7a41d9cb6df52158..66026dcf53e12cfa8077a60480cefe7a8c6cff18 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -142,7 +142,7 @@ mcasp0: mcasp@48038000 { }; 2. -edma1: edma@02728000 { +edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; @@ -165,13 +165,13 @@ edma1: edma@02728000 { power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc0: tptc@027b0000 { +edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc1: tptc@027b8000 { +edma1_tptc1: tptc@27b8000 { compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt index 3207ceb04d0bd462f3ce0bea6d1782bec771b7e1..abec59f35fde949baf60210017407e45e8cffce6 100644 --- a/Documentation/devicetree/bindings/dma/zxdma.txt +++ b/Documentation/devicetree/bindings/dma/zxdma.txt @@ -26,7 +26,7 @@ Controller: Client: Use specific request line passing from dmax For example, spdif0 tx channel request line is 4 - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { #sound-dai-cells = <0>; compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt index afc04589eadf35bbe2e339b79f07701225648140..27f2bc15298a46fca155273ce79d5cad415c3f24 100644 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -36,6 +36,8 @@ Optional properties: - read-only: this parameterless property disables writes to the eeprom + - size: total eeprom size in bytes + Example: eeprom@52 { diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt index e821e16ad65b28d07a04947c480392e252180e12..0c10802c8327274a56c3d313db952fd63b0d241e 100644 --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt @@ -66,7 +66,7 @@ See ".../sram/sram.txt" for the bindings. Example: -hsp_top0: hsp@03c00000 { +hsp_top0: hsp@3c00000 { ... #mbox-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 20f26fbce8756c6692969532c7cf8629f7c53a35..7b40054be0d8c76a3196cdb9fd2cc093ce63b463 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -18,6 +18,8 @@ Required properties: * Core, iface, and bus clocks required for "qcom,scm" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. +- qcom,dload-mode: phandle to the TCSR hardware block and offset of the + download mode control register (optional) Example for MSM8916: diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt index 6c7e6c7302f5a49aeae81ff2c99374ef8b2bc800..0423699d74c77468bbf1c9590c5fc5437ae15846 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt @@ -25,7 +25,7 @@ Please refer to gpio.txt in this directory for details of the common GPIO bindings used by client devices. Example: - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; ti,syscon-dev = <&devctrl 0x240>; gpio-controller; diff --git a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt new file mode 100644 index 0000000000000000000000000000000000000000..b3a6444b8f455c831531f73124a0e68c26eb954e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt @@ -0,0 +1,59 @@ +GPIO driver for Maxim MAX3191x industrial serializer + +Required properties: + - compatible: Must be one of: + "maxim,max31910" + "maxim,max31911" + "maxim,max31912" + "maxim,max31913" + "maxim,max31953" + "maxim,max31963" + - reg: Chip select number. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be two. For consumer use see gpio.txt. + +Optional properties: + - #daisy-chained-devices: + Number of chips in the daisy-chain (default is 1). + - maxim,modesel-gpios: GPIO pins to configure modesel of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + (if each chip is driven by a separate pin) or 1 + (if all chips are wired to the same pin). + - maxim,fault-gpios: GPIO pins to read fault of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + or 1. + - maxim,db0-gpios: GPIO pins to configure debounce of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + or 1. + - maxim,db1-gpios: GPIO pins to configure debounce of each chip. + The number of GPIOs must equal "maxim,db0-gpios". + - maxim,modesel-8bit: Boolean whether the modesel pin of the chips is + pulled high (8-bit mode). Use this if the modesel pin + is hardwired and consequently "maxim,modesel-gpios" + cannot be specified. By default if neither this nor + "maxim,modesel-gpios" is given, the driver assumes + that modesel is pulled low (16-bit mode). + - maxim,ignore-undervoltage: + Boolean whether to ignore undervoltage alarms signaled + by the "maxim,fault-gpios" or by the status byte + (in 16-bit mode). Use this if the chips are powered + through 5VOUT instead of VCC24V, in which case they + will constantly signal undervoltage. + +For other required and optional properties of SPI slave nodes please refer to +../spi/spi-bus.txt. + +Example: + gpio@0 { + compatible = "maxim,max31913"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + + maxim,modesel-gpios = <&gpio2 23>; + maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + maxim,db0-gpios = <&gpio2 25>; + maxim,db1-gpios = <&gpio2 26>; + + spi-max-frequency = <25000000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt index 1fd98ffa8cb7cb921930219de6ed26c30a76a1e9..528f5ef5a8932edcd05b0ccf5ad40971d410ca9a 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt @@ -30,7 +30,7 @@ Optional properties: Example: - pdc_gpios: gpio-controller@02006500 { + pdc_gpios: gpio-controller@2006500 { gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt index 174cdf3091700406bd26cb6d324dc2ec04fb10e0..b05a90e0ab2939652b91ac5dc42145a99832df38 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt @@ -59,7 +59,7 @@ Required properties: Example: - gpios: gpio-controller@02005800 { + gpios: gpio-controller@2005800 { #address-cells = <1>; #size-cells = <0>; compatible = "img,tz1090-gpio"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt new file mode 100644 index 0000000000000000000000000000000000000000..fed9158dd9133e858578d4e22776b2e6cf9d1221 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt @@ -0,0 +1,52 @@ +UniPhier GPIO controller + +Required properties: +- compatible: Should be "socionext,uniphier-gpio". +- reg: Specifies offset and length of the register set for the device. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be 2. The first cell is the pin number and the second + cell is used to specify optional parameters. +- interrupt-parent: Specifies the parent interrupt controller. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be 2. The first cell defines the interrupt number. + The second cell bits[3:0] is used to specify trigger type as follows: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. +- ngpios: Specifies the number of GPIO lines. +- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt) +- socionext,interrupt-ranges: Specifies an interrupt number mapping between + this GPIO controller and its interrupt parent, in the form of arbitrary + number of triplets. + +Optional properties: +- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt) + +Example: + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; + }; + +Consumer Example: + + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; + }; + +Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document. +Unfortunately, only the one's place is octal in the port numbering. (That is, +PORT 8, 9, 18, 19, 28, 29, ... are missing.) UNIPHIER_GPIO_PORT() is a helper +macro to calculate 29 * 8 + 4. diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 51c86f69995e5441875d89adff4e9e4f137819d2..a7ac460ad6572526023f9a88b6b741fb20ba59e9 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -14,6 +14,8 @@ Required Properties: - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller. - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller. - "renesas,gpio-r8a7796": for R8A7796 (R-Car M3-W) compatible GPIO controller. + - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller. + - "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller. - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller. - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller. - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 GPIO controller. diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index 4d6c8cdc85860567a09a1f1a2be269c3781bbee6..4a75da7051bd218c12ef8ff3bf49e555e2e0991c 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -29,6 +29,7 @@ controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts. - snps,nr-gpios : The number of pins in the port, a single cell. +- resets : Reset line for the controller. Example: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index b4ebd56d03f340a9e16752daedad188674ff4564..c6814d7cc2b282b2710275abf03e4a654ab84a07 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -13,6 +13,10 @@ Required properties: + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + rockchip,rk3036-mali + + rockchip,rk3066-mali + + rockchip,rk3188-mali + + rockchip,rk3228-mali + stericsson,db8500-mali - reg: Physical base address and length of the GPU registers @@ -40,10 +44,18 @@ Optional properties: Memory region to allocate from, as defined in Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + - mali-supply: + Phandle to regulator for the Mali device, as defined in + Documentation/devicetree/bindings/regulator/regulator.txt for details. + - operating-points-v2: Operating Points for the GPU, as defined in Documentation/devicetree/bindings/opp/opp.txt + - power-domains: + A power domain consumer specifier as defined in + Documentation/devicetree/bindings/power/power_domain.txt + Vendor-specific bindings ------------------------ @@ -63,6 +75,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - Rockchip variants: + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index b8eca3c7810dfb0ca184339537cd1e3e43383ac2..955e335e7e5698d14f4631441d4d1de3a8e3a047 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -1,10 +1,12 @@ OMAP SSI controller bindings -OMAP Synchronous Serial Interface (SSI) controller implements a legacy -variant of MIPI's High Speed Synchronous Serial Interface (HSI). +OMAP3's Synchronous Serial Interface (SSI) controller implements a +legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI), +while the controller found inside OMAP4 is supposed to be fully compliant +with the HSI standard. Required properties: -- compatible: Should include "ti,omap3-ssi". +- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi" - reg-names: Contains the values "sys" and "gdd" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device. Required Port sub-node properties: - compatible: Should be set to the following value ti,omap3-ssi-port (applicable to OMAP34xx devices) + ti,omap4-hsi-port (applicable to OMAP44xx devices) - reg-names: Contains the values "tx" and "rx" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -38,6 +41,10 @@ Required Port sub-node properties: property. If it's missing the port will not be enabled. +Optional properties: +- ti,hwmods: Shall contain TI interconnect module name if needed + by the SoC + Example for Nokia N900: ssi-controller@48058000 { diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt index bd6480b19535fa611ad7f7c683523c1d473407c9..e7106bfc1f138dddd7ce6830a5a4b8d951fed7eb 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -7,7 +7,9 @@ Required Properties: - compatible : should be "aspeed,ast2400-i2c-bus" or "aspeed,ast2500-i2c-bus" - clocks : root clock of bus, should reference the APB - clock + clock in the second cell +- resets : phandle to reset controller with the reset number in + the second cell - interrupts : interrupt number - interrupt-parent : interrupt controller for bus, should reference a aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic @@ -40,7 +42,8 @@ i2c { #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt index 2296d782b4c23394d9d0e76cf55ad27f9d75f635..7d53a2b795530522c00cf5a7cc38e6f0f178e7a5 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt @@ -17,7 +17,7 @@ Optional properties : Example : -i2c@02010084000 { +i2c@2010084000 { compatible = "lsi,api2c"; device_type = "i2c"; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index 5b123e0e4cc240bdf5c911bede1e71447ded7544..64e6e656c345c29c6b626100ffe74e47398959d1 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -6,6 +6,18 @@ davinci/keystone i2c interface contains. Required properties: - compatible: "ti,davinci-i2c" or "ti,keystone-i2c"; - reg : Offset and length of the register set for the device +- clocks: I2C functional clock phandle. + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the I2C device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt Recommended properties : - interrupts : standard interrupt property. diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt index 4f8ec947c6bd9cada0ce90b738e9e500102e43f0..38a05562d1d2958d41520a9920a83ddfdf444418 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt @@ -2,25 +2,39 @@ Device-Tree bindings for i2c gpio driver Required properties: - compatible = "i2c-gpio"; - - gpios: sda and scl gpio - + - sda-gpios: gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from since the signal is by definition + open drain. + - scl-gpios: gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from since the signal is by definition + open drain. Optional properties: - - i2c-gpio,sda-open-drain: sda as open drain - - i2c-gpio,scl-open-drain: scl as open drain - i2c-gpio,scl-output-only: scl as output only - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - i2c-gpio,timeout-ms: timeout to get data +Deprecated properties, do not use in new device tree sources: + - gpios: sda and scl gpio, alternative for {sda,scl}-gpios + - i2c-gpio,sda-open-drain: this means that something outside of our + control has put the GPIO line used for SDA into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + - i2c-gpio,scl-open-drain: this means that something outside of our + control has put the GPIO line used for SCL into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + Example nodes: +#include + i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ - >; - i2c-gpio,sda-open-drain; - i2c-gpio,scl-open-drain; + sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt index 212e6779dc5c0caf34944f1facac0ef971d16ffd..b38f58a1c8784184bf57bc0f9dd20d985d8cba45 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt @@ -6,10 +6,10 @@ multiplexer/switch will have one child node for each child bus. Optional properties: - #address-cells = <1>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - #size-cells = <0>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - i2c-mux For i2c multiplexers/switches that have child nodes that are a mixture diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index cad39aee9f73b99b8006029dfd52c52289d78f15..a777477e4547a8c7fa2811c5bba4e41d05144f97 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -13,6 +13,7 @@ Required properties: "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC. "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC. "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC. + "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC. "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt index 6b765485af7dfbab717748c4fbf938b98f1da8be..49df0053347ada4e808403bb5630e2427dc1b98b 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt @@ -24,7 +24,7 @@ Slave device properties: Example: - p2wi@01f03400 { + p2wi@1f03400 { compatible = "allwinner,sun6i-a31-p2wi"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index cee9d5055fa27c7593f5a9da09661c4f7eed9647..11263982470e548316e0038e202d8dfc05ab9b07 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below. interrupts used by the device. - interrupt-names - "irq" and "wakeup" names are recognized by I2C core, other names are - left to individual drivers. + "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, + other names are left to individual drivers. - host-notify device uses SMBus host notify protocol instead of interrupt line. diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt index bcd3ac8e6e0c57414b26aa60c91e543260208cdc..7d64753df94930b0469ade79168af8c32b1d3370 100644 --- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt +++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -29,15 +29,29 @@ Required properties: "microchip,mcp3204" "microchip,mcp3208" "microchip,mcp3301" + "microchip,mcp3550-50" + "microchip,mcp3550-60" + "microchip,mcp3551" + "microchip,mcp3553" NOTE: The use of the compatibles with no vendor prefix is deprecated and only listed because old DT use them. + - spi-cpha, spi-cpol (boolean): + Either SPI mode (0,0) or (1,1) must be used, so specify + none or both of spi-cpha, spi-cpol. The MCP3550/1/3 + is more efficient in mode (1,1) as only 3 instead of + 4 bytes need to be read from the ADC, but not all SPI + masters support it. + + - vref-supply: Phandle to the external reference voltage supply. + Examples: spi_controller { mcp3x0x@0 { compatible = "mcp3002"; reg = <0>; spi-max-frequency = <1000000>; + vref-supply = <&vref_reg>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt index 64dc4843c1803a261c6d68efff75ab6cd86608b3..0df9befdaecca610aafeac98cdae4daf6bb9453a 100644 --- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -12,6 +12,7 @@ for the Thermal Controller which holds a phandle to the AUXADC. Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs + - "mediatek,mt2712-auxadc": For MT2712 family of SoCs - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs - reg: Address range of the AUXADC unit. diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt new file mode 100644 index 0000000000000000000000000000000000000000..eaebbf8dab40a1b031043ab60a84584c82777907 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt @@ -0,0 +1,20 @@ +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver + +Datasheet publicly available at: +https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf + +Required properties: + - compatible: Should be one of + maxim,ds4422 + maxim,ds4424 + - reg: Should contain the DAC I2C address + +Optional properties: + - vcc-supply: Power supply is optional. If not defined, driver will ignore it. + +Example: + ds4224@10 { + compatible = "maxim,ds4424"; + reg = <0x10>; /* When A0, A1 pins are ground */ + vcc-supply = <&vcc_3v3>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt new file mode 100644 index 0000000000000000000000000000000000000000..9cb0e10df704aa58a4d62b419c1d14b6b7f1ec51 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt @@ -0,0 +1,34 @@ +Texas Instruments 8/10/12-bit 2/4-channel DAC driver + +Required properties: + - compatible: Must be one of: + "ti,dac082s085" + "ti,dac102s085" + "ti,dac122s085" + "ti,dac084s085" + "ti,dac104s085" + "ti,dac124s085" + - reg: Chip select number. + - spi-cpha, spi-cpol: SPI mode (0,1) or (1,0) must be used, so specify + either spi-cpha or spi-cpol (but not both). + - vref-supply: Phandle to the external reference voltage supply. + +For other required and optional properties of SPI slave nodes please refer to +../../spi/spi-bus.txt. + +Example: + vref_2v5_reg: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + dac@0 { + compatible = "ti,dac082s085"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-cpol; + vref-supply = <&vref_2v5_reg>; + }; diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt index 295a9edfa4fdcf89506c54321e573fa7cf044bcd..8d8176459d09666a91d53793072a082640765183 100644 --- a/Documentation/devicetree/bindings/iio/health/max30100.txt +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -20,9 +20,9 @@ Optional properties: Example: -max30100@057 { +max30100@57 { compatible = "maxim,max30100"; - reg = <57>; + reg = <0x57>; maxim,led-current-microamp = <24000 50000>; interrupt-parent = <&gpio1>; interrupts = <16 2>; diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt index c695e7cbeefb9d29d7d97602341e2cc3b82d8916..8629c18b0e78fb1fd665464f661cee9f4cfef091 100644 --- a/Documentation/devicetree/bindings/iio/health/max30102.txt +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt @@ -20,7 +20,7 @@ Optional properties: Example: -max30100@57 { +max30102@57 { compatible = "maxim,max30102"; reg = <0x57>; maxim,red-led-current-microamp = <7000>; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt index 77d5aba1bd8cf562b0ad0ea6a119e0187178e668..baecc4a85197573925430b86a76a446c65c6c1cc 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt @@ -19,7 +19,7 @@ Optional properties: Example: -ak8974@0f { +ak8974@f { compatible = "asahi-kasei,ak8974"; reg = <0x0f>; avdd-supply = <&foo_reg>; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index e1e7dd3259f60abc12b1ac0c61ac5ff68a19a69c..aa67ceb0d4e046cc0f228baa10f12de33f2f6484 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ak8975@0c { +ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 9ec6f5ce54fca5e0de95fac1f99fe2e96427fde1..6f626f73417ee6aeccc78eabeb45a86994c93186 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -46,6 +46,8 @@ Accelerometers: - st,h3lis331dl-accel - st,lng2dm-accel - st,lis3l02dq +- st,lis2dw12 +- st,lis3dhh Gyroscopes: - st,l3g4200d-gyro @@ -71,3 +73,5 @@ Pressure sensors: - st,lps25h-press - st,lps331ap-press - st,lps22hb-press +- st,lps33hw +- st,lps35hw diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt new file mode 100644 index 0000000000000000000000000000000000000000..519510a11af9814b2d95c008c83f42cfc1c361d6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-mouse.txt @@ -0,0 +1,32 @@ +Device-Tree bindings for GPIO attached mice + +This simply uses standard GPIO handles to define a simple mouse connected +to 5-7 GPIO lines. + +Required properties: + - compatible: must be "gpio-mouse" + - scan-interval-ms: The scanning interval in milliseconds + - up-gpios: GPIO line phandle to the line indicating "up" + - down-gpios: GPIO line phandle to the line indicating "down" + - left-gpios: GPIO line phandle to the line indicating "left" + - right-gpios: GPIO line phandle to the line indicating "right" + +Optional properties: + - button-left-gpios: GPIO line handle to the left mouse button + - button-middle-gpios: GPIO line handle to the middle mouse button + - button-right-gpios: GPIO line handle to the right mouse button +Example: + +#include + +gpio-mouse { + compatible = "gpio-mouse"; + scan-interval-ms = <50>; + up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt index 4357e498ef0422d5fdc2715e3daf065ac80e41f4..1458c3179a63a2e7ea223814169247b97f77ddc3 100644 --- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -19,7 +19,7 @@ Example: #include - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt index 49fa14ed155ca282dd63068a0bbe15d739a5cd86..298e3442f1439cec70c51c50b4ffc6817e1fe3b4 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -10,7 +10,7 @@ Required properties: Example: - egalax_ts@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt new file mode 100644 index 0000000000000000000000000000000000000000..1dcff4a43eaa8dc0091803f46b9c45454dd0660d --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt @@ -0,0 +1,27 @@ +* EETI EXC3000 Multiple Touch Controller + +Required properties: +- compatible: must be "eeti,exc3000" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt +- touchscreen-size-x: See touchscreen.txt +- touchscreen-size-y: See touchscreen.txt + +Optional properties: +- touchscreen-inverted-x: See touchscreen.txt +- touchscreen-inverted-y: See touchscreen.txt +- touchscreen-swapped-x-y: See touchscreen.txt + +Example: + + touchscreen@2a { + compatible = "eeti,exc3000"; + reg = <0x2a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index c98757a69110dbc6a997998d1e27753c205bdbdd..0c369d8ebcabdfebc04539f5905ee3b9f38d15de 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -2,7 +2,8 @@ Device tree bindings for Goodix GT9xx series touchscreen controller Required properties: - - compatible : Should be "goodix,gt911" + - compatible : Should be "goodix,gt1151" + or "goodix,gt911" or "goodix,gt9110" or "goodix,gt912" or "goodix,gt927" diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt new file mode 100644 index 0000000000000000000000000000000000000000..121d9b7c79a24cd05e6452bb8b52a14d3d20f46a --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -0,0 +1,42 @@ +* HiDeep Finger and Stylus touchscreen controller + +Required properties: +- compatible : must be "hideep,hideep-ts" +- reg : I2C slave address, (e.g. 0x6C). +- interrupt-parent : Interrupt controller to which the chip is connected. +- interrupts : Interrupt to which the chip is connected. + +Optional properties: +- vdd-supply : It is the controller supply for controlling + main voltage(3.3V) through the regulator. +- vid-supply : It is the controller supply for controlling + IO voltage(1.8V) through the regulator. +- reset-gpios : Define for reset gpio pin. + It is to use for reset IC. +- touchscreen-size-x : X axis size of touchscreen +- touchscreen-size-y : Y axis size of touchscreen +- linux,keycodes : Specifies an array of numeric keycode values to + be used for reporting button presses. The array can + contain up to 3 entries. + +Example: + +#include "dt-bindings/input/input.h" + +i2c@00000000 { + + /* ... */ + + touchscreen@6c { + compatible = "hideep,hideep-ts"; + reg = <0x6c>; + interrupt-parent = <&gpx1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&ldo15_reg>"; + vid-supply = <&ldo18_reg>; + reset-gpios = <&gpx1 5 0>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + linux,keycodes = , , ; + }; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index e67e58b61706243153a2a70ebc5f4cc8cf66b643..16491500442447e4ce61d85a7b4f7dac44c930b1 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -21,7 +21,7 @@ Optional properties: each read. Valid values are 1, 4, 8, 16 and 32. Example: - tsc: tsc@02040000 { + tsc: tsc@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = , diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt new file mode 100644 index 0000000000000000000000000000000000000000..d9b7c2ff611e02e968c8dc96728d824ad27ad412 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt @@ -0,0 +1,34 @@ +* Samsung S6SY761 touchscreen controller + +Required properties: +- compatible : must be "samsung,s6sy761" +- reg : I2C slave address, (e.g. 0x48) +- interrupt-parent : the phandle to the interrupt controller which provides + the interrupt +- interrupts : interrupt specification +- avdd-supply : analogic power supply +- vdd-supply : power supply + +Optional properties: +- touchscreen-size-x : see touchscreen.txt. This property is embedded in the + device. If defined it forces a different x resolution. +- touchscreen-size-y : see touchscreen.txt. This property is embedded in the + device. If defined it forces a different y resolution. + +Example: + +i2c@00000000 { + + /* ... */ + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_NONE>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt index 4ae553eb333d00c749c75b0ee385f02f92b8bd42..4903fb72d883cb2279dea8d7c4ccf78a508f6b8b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt @@ -20,7 +20,7 @@ Required properties: Example: -sc-nmi-intc@01c00030 { +sc-nmi-intc@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt index 49ccabbfa6f3dcd13634f52ef308d8251e163027..a4ff93d6b7f386454558035472e1a2aa0eca205d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt @@ -8,6 +8,7 @@ Required properties: "fsl,ls1043a-msi" "fsl,ls1046a-msi" "fsl,ls1043a-v1.1-msi" + "fsl,ls1012a-msi" - msi-controller: indicates that this is a PCIe MSI controller node - reg: physical base address of the controller and length of memory mapped. - interrupts: an interrupt to the parent interrupt controller. diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt index d9bb106bdd16f6e8deb1bddc521b2b17163662b9..5f94d7739d8d27916c7331083f4f817e1860c732 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt @@ -20,7 +20,7 @@ Please refer to interrupts.txt in this directory for details of the common Interrupt Controllers bindings used by client devices. Example: - kirq0: keystone_irq0@026202a0 { + kirq0: keystone_irq0@26202a0 { compatible = "ti,keystone-irq"; ti,syscon-dev = <&devctrl 0x2a0>; interrupts = ; diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt index b2641ceb2b4060bfe441c85d57ec177ca1635691..059139abce3547bda5700695b521c713b0c3a07f 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt @@ -115,7 +115,7 @@ to non-secure vs secure interrupt line. iommus = <&apps_iommu 4>; }; - gpu@01c00000 { + gpu@1c00000 { ... iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt index 3ed027cfca95cc98010342cf5d68363bbc801301..857df929a6542157effed5df4944f6ba9f3da67c 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt @@ -53,7 +53,7 @@ Example: R8A7791 IPMMU-MX and VSP1-D0 bus master #iommu-cells = <1>; }; - vsp1@fe928000 { + vsp@fe928000 { ... iommus = <&ipmmu_mx 13>; ... diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt index 59b56365f6485f33404b5c5a17d390f6fc57553d..cf1ea403ba7aa22f14542c8ceb295475b9f2a574 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.txt +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt @@ -32,7 +32,7 @@ syscon: syscon@10000000 { compatible = "arm,realview-pb1176-syscon", "syscon"; reg = <0x10000000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; @@ -40,7 +40,7 @@ syscon: syscon@10000000 { linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8.1 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x02>; @@ -48,7 +48,7 @@ syscon: syscon@10000000 { linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8.2 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x04>; @@ -56,35 +56,35 @@ syscon: syscon@10000000 { linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8.3 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8.4 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8.5 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8.6 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8.7 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x80>; diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt index b449d025049f005fbbdfcaf539f7286f777e83ca..c3b55b3ede8a86e4e13db1d97d258e567385eb7d 100644 --- a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt +++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt @@ -29,7 +29,7 @@ Required properties: Example(K2G): ------------ - msgmgr: msgmgr@02a00000 { + msgmgr: msgmgr@2a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; reg-names = "queue_proxy_region", "queue_state_debug_region"; diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt index ea2b16ced49bb271fbf8193bbb017808bf4f8d1b..7f722316458a3eae58969dd959d37bb4d2aadb75 100644 --- a/Documentation/devicetree/bindings/marvell.txt +++ b/Documentation/devicetree/bindings/marvell.txt @@ -446,7 +446,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery CPU Error node: - cpu-error@0070 { + cpu-error@70 { compatible = "marvell,mv64360-cpu-error"; reg = <0x70 0x10 0x128 0x28>; interrupts = <3>; @@ -466,7 +466,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery SRAM Controller node: - sram-ctrl@0380 { + sram-ctrl@380 { compatible = "marvell,mv64360-sram-ctrl"; reg = <0x380 0x80>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..46a0bac8b3b95cf001dd7e4f2a59675c4cd4e747 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec-gpio.txt @@ -0,0 +1,32 @@ +* HDMI CEC GPIO driver + +The HDMI CEC GPIO module supports CEC implementations where the CEC line +is hooked up to a pull-up GPIO line and - optionally - the HPD line is +hooked up to another GPIO line. + +Required properties: + - compatible: value must be "cec-gpio". + - cec-gpios: gpio that the CEC line is connected to. The line should be + tagged as open drain. + +If the CEC line is associated with an HDMI receiver/transmitter, then the +following property is also required: + + - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. + +If the CEC line is not associated with an HDMI receiver/transmitter, then +the following property is optional: + + - hpd-gpios: gpio that the HPD line is connected to. + +Example for the Raspberry Pi 3 where the CEC line is connected to +pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is +connected to pin 11 aka BCM17: + +#include + +cec-gpio { + compatible = "cec-gpio"; + cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt index 26ca25b6d2647eeaa0196dc6f013c08efbfd1512..0d4fdaedc6f1e82aec78f8080b6c312104b3cb0e 100644 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -3,8 +3,11 @@ G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. Required properties: -- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and - 5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433) +- compatible: should be one of + "samsung,exynos5250-gsc" + "samsung,exynos5420-gsc" + "samsung,exynos5433-gsc" + "samsung,exynos5-gsc" (deprecated) - reg: should contain G-Scaler physical address location and length. - interrupts: should contain G-Scaler interrupt number @@ -15,7 +18,7 @@ Optional properties: Example: gsc_0: gsc@0x13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt new file mode 100644 index 0000000000000000000000000000000000000000..80f2e89568e10153a03ae8cc595eb449a4dc4fd9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt @@ -0,0 +1,33 @@ +* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor + +The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 3864H x 2202V. It is programmable through I2C +interface. The I2C address is fixed to 0x1a as per sensor data sheet. +Image data is sent through MIPI CSI-2, which is configured as 4 lanes +at 1440 Mbps. + + +Required Properties: +- compatible: value should be "sony,imx274" for imx274 sensor +- reg: I2C bus address of the device + +Optional Properties: +- reset-gpios: Sensor reset GPIO + +The imx274 device node should contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio_sensor 0 0>; + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt index 855e1faf73e2fb39cd9990b205d69f6ca1dcacc6..33f10a94c381c03dddfa80d5041800703de63c96 100644 --- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt +++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt @@ -27,6 +27,8 @@ Optional properties - nokia,nvm-size: The size of the NVM, in bytes. If the size is not given, the NVM contents will not be read. - reset-gpios: XSHUTDOWN GPIO +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt Endpoint node mandatory properties diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt index 5218921629ed456ee59279b6c75a7b02b95cfa7b..49f8bcc2ea4d10569ca9ef9b7fc41e0c34f50c1a 100644 --- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt +++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt @@ -27,7 +27,7 @@ Documentation/devicetree/bindings/media/video-interfaces.txt. Example: - tc358743@0f { + tc358743@f { compatible = "toshiba,tc358743"; reg = <0x0f>; clocks = <&hdmi_osc>; diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt b/Documentation/devicetree/bindings/media/img-ir-rev1.txt index 5434ce61b92571f65edb03fb02cb84138c1caaad..ed9ec52b77e0633f1e367cd160c112b71c667f73 100644 --- a/Documentation/devicetree/bindings/media/img-ir-rev1.txt +++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt @@ -25,7 +25,7 @@ Optional properties: Example: - ir@02006200 { + ir@2006200 { compatible = "img,ir-rev1"; reg = <0x02006200 0x100>; interrupts = <29 4>; diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt index 9b695bcbf2190bdd7a327579b3b0951a35524516..16427017cb45561e97051d36abe7bcca108c4aa1 100644 --- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt @@ -22,7 +22,7 @@ Optional properties: Example: R8A7790 (R-Car H2) VSP1-S node - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt new file mode 100644 index 0000000000000000000000000000000000000000..fd5276abfad6822e01632302c8dc7b883479cab1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -0,0 +1,33 @@ +device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA) + +RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D +graphics operations, such as point/line drawing, image scaling, rotation, +BitBLT, alpha blending and image blur/sharpness. + +Required properties: +- compatible: value should be one of the following + "rockchip,rk3288-rga"; + "rockchip,rk3399-rga"; + +- interrupts: RGA interrupt specifier. + +- clocks: phandle to RGA sclk/hclk/aclk clocks + +- clock-names: should be "aclk", "hclk" and "sclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: should be "core", "axi" and "ahb" + +Example: +SoC-specific DT entry: + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0xff680000 0x10000>; + interrupts = ; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core, "axi", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt index 8be2a040c6c64b5ef395383867ee739afe59e17f..ece0832fdeaff7e33903fa759fc6edd90c88bd90 100644 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ b/Documentation/devicetree/bindings/media/stih-cec.txt @@ -13,7 +13,7 @@ Required properties: Example for STIH407: -sti-cec@094a087c { +sti-cec@94a087c { compatible = "st,stih-cec"; reg = <0x94a087c 0x64>; clocks = <&clk_sysin>; diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index 6af3fc210ecce9e84640631308d59d12ceb8ad38..c7888d6f640874df3607a578e68cb124d0b8cfa8 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -50,7 +50,7 @@ Example: /* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */ - c8sectpfe@08a20000 { + c8sectpfe@8a20000 { compatible = "st,stih407-c8sectpfe"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "stfe", "stfe-ram"; diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt index 302a0b183cb883245c0804e1effa878cf4d11139..91648c569b1e5aba640f760f9b78d36dd873ac08 100644 --- a/Documentation/devicetree/bindings/media/sunxi-ir.txt +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt @@ -14,7 +14,7 @@ Optional properties: Example: -ir0: ir@01c21800 { +ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; clock-names = "apb", "ir"; diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt new file mode 100644 index 0000000000000000000000000000000000000000..a9f00c2bf8970efa628267c1b5a03dc0aa5566af --- /dev/null +++ b/Documentation/devicetree/bindings/media/tango-ir.txt @@ -0,0 +1,21 @@ +Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx) + +Required properties: + +- compatible: "sigma,smp8642-ir" +- reg: address/size of NEC+RC5 area, address/size of RC6 area +- interrupts: spec for IR IRQ +- clocks: spec for IR clock (typically the crystal oscillator) + +Optional properties: + +- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt + +Example: + + ir@10518 { + compatible = "sigma,smp8642-ir"; + reg = <0x10518 0x18>, <0x105e0 0x1c>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + }; diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt new file mode 100644 index 0000000000000000000000000000000000000000..c503f06f3b844bba5b8bcab0a5c319fea2a7cc15 --- /dev/null +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt @@ -0,0 +1,27 @@ +* Tegra HDMI CEC hardware + +The HDMI CEC module is present in Tegra SoCs and its purpose is to +handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be one of the following: + "nvidia,tegra114-cec" + "nvidia,tegra124-cec" + "nvidia,tegra210-cec" + - reg : Physical base address of the IP registers and length of memory + mapped region. + - interrupts : HDMI CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to HDMI CEC clock. + - clock-names : from common clock binding: must contain "cec", + corresponding to the entry in the clocks property. + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. + +Example: + +cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; +}; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 852041a7480c0a8054489f54a15e6667a70c0dc6..3994b0143dd1ef37c9ce28462f686e51ccdadc4e 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -55,6 +55,15 @@ divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width and data-shift properties can be used to assign physical data lines to each endpoint node (logical bus). +Documenting bindings for devices +-------------------------------- + +All required and optional bindings the device supports shall be explicitly +documented in device DT binding documentation. This also includes port and +endpoint nodes for the device, including unit-addresses and reg properties where +relevant. + +Please also see Documentation/devicetree/bindings/graph.txt . Required properties ------------------- @@ -67,6 +76,16 @@ are required in a relevant parent node: identifier, should be 1. - #size-cells : should be zero. + +Optional properties +------------------- + +- flash-leds: An array of phandles, each referring to a flash LED, a sub-node + of the LED driver device node. + +- lens-focus: A phandle to the node of the focus lens controller. + + Optional endpoint properties ---------------------------- @@ -99,7 +118,10 @@ Optional endpoint properties determines the logical lane number, while the value of an entry indicates physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0. - This property is valid for serial busses only (e.g. MIPI CSI-2). + If the hardware does not support lane reordering, monotonically + incremented values shall be used from 0 or 1 onwards, depending on + whether or not there is also a clock lane. This property is valid for + serial busses only (e.g. MIPI CSI-2). - clock-lanes: an array of physical clock lane indexes. Position of an entry determines the logical lane number, while the value of an entry indicates physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt new file mode 100644 index 0000000000000000000000000000000000000000..82d923ef413f92a6bc8c0887c91cfeb85b12dc02 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt @@ -0,0 +1,27 @@ +DDR PHY Front End (DPFE) for Broadcom STB +========================================= + +DPFE and the DPFE firmware provide an interface for the host CPU to +communicate with the DCPU, which resides inside the DDR PHY. + +There are three memory regions for interacting with the DCPU. These are +specified in a single reg property. + +Required properties: + - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu" + or "brcm,dpfe-cpu" + - reg: must reference three register ranges + - start address and length of the DCPU register space + - start address and length of the DCPU data memory space + - start address and length of the DCPU instruction memory space + - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem"; + they must be in the same order as the register declarations + +Example: + dpfe_cpu0: dpfe-cpu@f1132000 { + compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu"; + reg = <0xf1132000 0x180 + 0xf1134000 0x1000 + 0xf1138000 0x4000>; + reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem"; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 0db60470ebb6aa7f8d236afd4599166dafb0c11b..fd823d6091b29514e0db29a3b73b1c47edbf064f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-" where - is the IP revision of the specific EMIF instance. - For am437x should be ti,emif-am4372. + is the IP revision of the specific EMIF instance. For newer controllers, + compatible should be one of the following: + "ti,emif-am3352" + "ti,emif-am4372" - phy-type : indicating the DDR phy type. Following are the allowed values diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index b37bdde5cfda3e959887fe5ed434a7a4697a7bdf..bdd017686ea5a082faf99e389b48a624074471cc 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -65,45 +65,6 @@ Optional properties: a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified. - - wlf,inmode : A list of INn_MODE register values, where n is the number - of input signals. Valid values are 0 (Differential), 1 (Single-ended) and - 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. - If present, values must be specified less than or equal to the number of - input signals. If values less than the number of input signals, elements - that have not been specified are set to 0 by default. Entries are: - (wm5102, wm5110, wm8280, wm8997) - (wm8998, wm1814) - - wlf,out-mono : A list of boolean values indicating whether each output is - mono or stereo. Position within the list indicates the output affected - (eg. First entry in the list corresponds to output 1). A non-zero value - indicates a mono output. If present, the number of values should be less - than or equal to the number of outputs, if less values are supplied the - additional outputs will be treated as stereo. - - - wlf,dmic-ref : DMIC reference voltage source for each input, can be - selected from either MICVDD or one of the MICBIAS's, defines - (ARIZONA_DMIC_xxxx) are provided in . If - present, the number of values should be less than or equal to the - number of inputs, unspecified inputs will use the chip default. - - - wlf,max-channels-clocked : The maximum number of channels to be clocked on - each AIF, useful for I2S systems with multiple data lines being mastered. - Specify one cell for each AIF to be configured, specify zero for AIFs that - should be handled normally. - If present, number of cells must be less than or equal to the number of - AIFs. If less than the number of AIFs, for cells that have not been - specified the corresponding AIFs will be treated as default setting. - - - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt @@ -112,6 +73,7 @@ Optional properties: Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt Extcon - ../extcon/extcon-arizona.txt + Sound - ../sound/arizona.txt Example: diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt index 4fc5b83726d6c6a6e90e971f9480f6851983d83d..ce8cf0ec6279a5ccc8aece96e4c85cc2aab46776 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt @@ -9,10 +9,16 @@ Required properties: "aspeed,g5-scu", "syscon", "simple-mfd" - reg: contains the offset and length of the SCU memory region +- #clock-cells: should be set to <1> - the system controller is also a + clock provider +- #reset-cells: should be set to <1> - the system controller is also a + reset line provider Example: syscon: syscon@1e6e2000 { compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt new file mode 100644 index 0000000000000000000000000000000000000000..82f82e069563cf9a559ea6c647b8aa9268a0dc15 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt @@ -0,0 +1,16 @@ +Broadcom iProc Chip Device Resource Unit (CDRU) + +Various Broadcom iProc SoCs have a set of registers that provide various +chip specific device and resource configurations. This node allows access to +these CDRU registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-cdru", "syscon" for Stingray +- reg: base address and range of the CDRU registers + +Example: + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt new file mode 100644 index 0000000000000000000000000000000000000000..4421e9771b8a2a7ca82b1208a7e7a5e8e334fc09 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt @@ -0,0 +1,18 @@ +Broadcom iProc Multi Host Bridge (MHB) + +Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls +the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint +interface; 3) access to the Nitro (network processing) engine + +This node allows access to these MHB registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-mhb", "syscon" for Stingray +- reg: base address and range of the MHB registers + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 741e76688cf2ac07f97e00d57b63c06ab885c787..0f2587fa42cbd21a0d44d91c14aeb588608dd5b7 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -19,7 +19,7 @@ Required properties: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index 6a1ae3a2b77f978d33515cb2bf5c08cecd44cc4d..e6754974a74594b8c969441fec6b08019b2c2167 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -127,6 +127,12 @@ Required properties for the LED child node: Optional properties for the LED child node: - label : see Documentation/devicetree/bindings/leds/common.txt +Optional nodes: +- max77693-muic : + Node used only by extcon consumers. + Required properties: + - compatible : "maxim,max77693-muic" + Example: #include diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt index 51fc1a60caa560afe8a035b795e4deb1157d67c3..f2f3fe75901c1d4b5e3afa03ed488ceb37931092 100644 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ b/Documentation/devicetree/bindings/mfd/max77802.txt @@ -18,7 +18,7 @@ Required properties: Example: - max77802: pmic@09 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&intc>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 39ba4146769deb9ab3549a0789bbb340e693e7ca..ac235fe385fc296e371fab835170c9e0b14a7ae1 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -113,7 +113,6 @@ MC13892 regulators: Examples: ecspi@70010000 { /* ECSPI1 */ - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index bcb6abb9d413b8d246cfb519b0dd213cb99e6a11..336c0495c8a3a21bb33758b4cff3d1d600a9a133 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -41,7 +41,7 @@ foo@1000 { compatible = "syscon", "simple-mfd"; reg = <0x01000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt new file mode 100644 index 0000000000000000000000000000000000000000..21b9a897fca5db388efd2b688323846fcaace99b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt @@ -0,0 +1,40 @@ +Spreadtrum SC27xx Power Management Integrated Circuit (PMIC) + +The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730 +and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all +mobile handset power management, audio codec, battery management and user +interface support function in a single chip. It has 6 major functional +blocks: +- DCDCs to support CPU, memory. +- LDOs to support both internal and external requirement. +- Battery management system, such as charger, fuel gauge. +- Audio codec. +- User interface function, such as indicator, flash LED and so on. +- IC level interface, such as power on/off control, RTC and typec and so on. + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720" + "sprd,sc2721" + "sprd,sc2723" + "sprd,sc2730" + "sprd,sc2731" +- reg: The address of the device chip select, should be 0. +- spi-max-frequency: Typically set to 26000000. +- interrupts: The interrupt line the device is connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2. +- #address-cells: Child device offset number of cells, must be 1. +- #size-cells: Child device size number of cells, must be 0. + +Example: +pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt index badff3611a986e9d726a4e9851b840b9ac413806..86dd8191b04c5e5787a5961b9129a5824089657a 100644 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt @@ -10,7 +10,7 @@ Required properties: - #io-channel-cells: shall be 0, Example: - ths: ths@01c25000 { + ths: ths@1c25000 { compatible = "allwinner,sun8i-a33-ths"; reg = <0x01c25000 0x100>; #thermal-sensor-cells = <0>; @@ -47,7 +47,7 @@ Optional properties: Example: - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 03c5a551da55589632c73f10edbfccb8b83621cb..dd2c06540485bd94c8ee7197d5e052f4dbef4de1 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions: Example: - prcm: prcm@01f01400 { + prcm: prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt index 408f768686f1e9c9606dc5a188cbd7ba1b8f663f..8b92d4576c4258ca85804d0d46d4d2236a5029fb 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -18,7 +18,7 @@ Optional property: performed on the device. Examples: -gpr: iomuxc-gpr@020e0000 { +gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; }; diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index e4e1cd91fb1f2f9701d6df46da1b3461aaaa3a3d..356c29789cf54862e1ece93dc40449e221481304 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -11,3 +11,156 @@ Required properties: The experimental -viper variants are for running Linux on the 3384's BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor. + +Power management +---------------- + +For power management (particularly, S2/S3/S5 system suspend), the following SoC +components are needed: + += Always-On control block (AON CTRL) + +This hardware provides control registers for the "always-on" (even in low-power +modes) hardware, such as the Power Management State Machine (PMSM). + +Required properties: +- compatible : should be one of + "brcm,bcm7425-aon-ctrl" + "brcm,bcm7429-aon-ctrl" + "brcm,bcm7435-aon-ctrl" and + "brcm,brcmstb-aon-ctrl" +- reg : the register start and length for the AON CTRL block + +Example: + +syscon@410000 { + compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x400>; +}; + += Memory controllers + +A Broadcom STB SoC typically has a number of independent memory controllers, +each of which may have several associated hardware blocks, which are versioned +independently (control registers, DDR PHYs, etc.). One might consider +describing these controllers as a parent "memory controllers" block, which +contains N sub-nodes (one for each controller in the system), each of which is +associated with a number of hardware register resources (e.g., its PHY. + +== MEMC (MEMory Controller) + +Represents a single memory controller instance. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc" and "simple-bus" +- ranges : should contain the child address in the parent address + space, must be 0 here, and the register start and length of + the entire memory controller (including all sub nodes: DDR PHY, + arbiter, etc.) +- #address-cells : must be 1 +- #size-cells : must be 1 + +Example: + + memory-controller@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges = <0x0 0x0 0xa000>; + #address-cells = <1>; + #size-cells = <1>; + + memc-arb@1000 { + ... + }; + + memc-ddr@2000 { + ... + }; + + ddr-phy@6000 { + ... + }; + }; + +Should contain subnodes for any of the following relevant hardware resources: + +== DDR PHY control + +Control registers for this memory controller's DDR PHY. + +Required properties: +- compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v64.5" + "brcm,brcmstb-ddr-phy" + +- reg : the DDR PHY register range and length + +Example: + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v64.5"; + reg = <0x6000 0xc8>; + }; + +== DDR memory controller sequencer + +Control registers for this memory controller's DDR memory sequencer + +Required properties: +- compatible : should contain one of these + "brcm,bcm7425-memc-ddr" + "brcm,bcm7429-memc-ddr" + "brcm,bcm7435-memc-ddr" and + "brcm,brcmstb-memc-ddr" + +- reg : the DDR sequencer register range and length + +Example: + + memc-ddr@2000 { + compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x300>; + }; + +== MEMC Arbiter + +The memory controller arbiter is responsible for memory clients allocation +(bandwidth, priorities etc.) and needs to have its contents restored during +deep sleep states (S3). + +Required properties: + +- compatible : should contain one of these + "brcm,brcmstb-memc-arb-v10.0.0.0" + "brcm,brcmstb-memc-arb" + +- reg : the DDR Arbiter register range and length + +Example: + + memc-arb@1000 { + compatible = "brcm,brcmstb-memc-arb-v10.0.0.0"; + reg = <0x1000 0x248>; + }; + +== Timers + +The Broadcom STB chips contain a timer block with several general purpose +timers that can be used. + +Required properties: + +- compatible : should contain one of: + "brcm,bcm7425-timers" + "brcm,bcm7429-timers" + "brcm,bcm7435-timers and + "brcm,brcmstb-timers" +- reg : the timers register range +- interrupts : the interrupt line for this timer block + +Example: + + timers: timer@4067c0 { + compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers"; + reg = <0x4067c0 0x40>; + interrupts = <&periph_intc 19>; + }; diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt new file mode 100644 index 0000000000000000000000000000000000000000..77df94d7a32f57658976c87ab9dc0f33096fd7f1 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ge-achc.txt @@ -0,0 +1,26 @@ +* GE Healthcare USB Management Controller + +A device which handles data aquisition from compatible USB based peripherals. +SPI is used for device management. + +Note: This device does not expose the peripherals as USB devices. + +Required properties: + +- compatible : Should be "ge,achc" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be + 1MHz for the GE ACHC. + +Example: + +spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 94a90b49a6925dfff4b0b18a5a60f65c4852583c..fb11ae8b3b729061eb062afc7decf4aeefb7c06b 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -146,7 +146,7 @@ sdhci@ab000000 { Example with sdio function subnode: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index e35645598315ff6a685961a21ffda0d53ea5ed4f..6b3d40ca395eb47c59696766f45cf22a6fc8de77 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -74,7 +74,7 @@ mmc0: sdhci@fe81e000 { /* Example SD stih407 family configuration */ -mmc1: sdhci@09080000 { +mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; @@ -90,7 +90,7 @@ mmc1: sdhci@09080000 { /* Example eMMC stih407 family configuration */ -mmc0: sdhci@09060000 { +mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 63b57e2a10fb2eac92be0ef7d24cb6079b326af5..132e0007d7d682062bf18a08445d89c1b2ef081a 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -29,7 +29,7 @@ Optional properties: Examples: - Within .dtsi: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; @@ -39,7 +39,7 @@ Examples: }; - Within dts: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { pinctrl-names = "default", "default"; pinctrl-0 = <&mmc0_pins_a>; pinctrl-1 = <&mmc0_cd_pin_reference_design>; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 9ce35af8507c1da0a208fc1823b5d1d487909114..4cab5d85cf6f8eaf11cdf5b90b18cdcc3def4626 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -13,6 +13,7 @@ Required properties: at25df321a at25df641 at26df081a + en25s64 mr25h256 mr25h10 mr25h40 @@ -31,6 +32,7 @@ Required properties: s25fl008k s25fl064k sst25vf040b + sst25wf040b m25p40 m25p80 m25p16 diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index a37c67bcb43b6b8e35ce8215e734bd016e41199a..5e13a5cdff03c40c81f43b121902ed62e334a2c7 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -31,7 +31,7 @@ see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. Examples: -nfc: nand@01c03000 { +nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <0 37 1>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt index 10640b17c8668b5bc53a1e50813e6e6155b9458c..e98118aef5f6f245786f561ea8892dac9ac6fa9a 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt @@ -10,7 +10,7 @@ Required properties: Example: -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt index 4ec56413779d3af28b60b3b647d4134d7f3e42bb..ab5b8613b0efc6b66e2c45cc4ee03ee8214b7fb7 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt @@ -9,7 +9,7 @@ Optional properties: - phy-supply: phandle to a regulator if the PHY needs one Example at the SoC level: -mdio@01c0b080 { +mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; #address-cells = <1>; @@ -18,7 +18,7 @@ mdio@01c0b080 { And at the board level: -mdio@01c0b080 { +mdio@1c0b080 { phy-supply = <®_emac_3v3>; phy0: ethernet-phy@0 { diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt index ea4d752389a261ec5c6a18d4cc9db1b20c8b9dcc..8b3f953656e358dc5ad38103d0ce3565a42dc43c 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt @@ -15,7 +15,7 @@ Optional properties: Examples: - gmac: ethernet@01c50000 { + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>, <0x01c20164 0x4>; diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt new file mode 100644 index 0000000000000000000000000000000000000000..94797df751b870b3e073103ba9927139ac9897c9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth.txt @@ -0,0 +1,5 @@ +The following properties are common to the Bluetooth controllers: + +- local-bd-address: array of 6 bytes, specifies the BD address that was + uniquely assigned to the Bluetooth device, formatted with least significant + byte first (little-endian). diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt index 26c77d985fafe06092467c5a2ea8a0e176d0d460..3956af1d30f37a8a732bae12ab0598e5c553975c 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt @@ -109,7 +109,7 @@ ethernet@f0ba0000 { reg = <0xf0ba0000 0xfc4c>; interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; - mdio@0e14 { + mdio@e14 { compatible = "brcm,genet-mdio-v4"; #address-cells = <0x1>; #size-cells = <0x0>; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 78138333ff7a3611f8671a4372e08a0da55eddbc..63e90421d029932f1917d6ac3e119e159e5714ce 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -45,7 +45,7 @@ Required properties: Example: SoC dtsi: -m_can1: can@020e8000 { +m_can1: can@20e8000 { compatible = "bosch,m_can"; reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; reg-names = "m_can", "message_ram"; diff --git a/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/Documentation/devicetree/bindings/net/can/sun4i_can.txt index 84ed1909df763b261a82587d53d0a818f8ade948..f69845e6feaf4e2ab23a63be8ff67c7796756fd0 100644 --- a/Documentation/devicetree/bindings/net/can/sun4i_can.txt +++ b/Documentation/devicetree/bindings/net/can/sun4i_can.txt @@ -19,7 +19,7 @@ SoC common .dtsi file: allwinner,pull = <0>; }; ... - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = <0 26 4>; @@ -29,7 +29,7 @@ SoC common .dtsi file: Board specific .dts file: - can0: can@01c2bc00 { + can0: can@1c2bc00 { pinctrl-names = "default"; pinctrl-0 = <&can0_pins_a>; status = "okay"; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 4448d063ddf6c96402d3773ba1280c37fb5b692e..464d6bf87605392a5302349abf7b54e673ed5dc1 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -52,7 +52,7 @@ I2C managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ @@ -89,7 +89,7 @@ MDIO managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt new file mode 100644 index 0000000000000000000000000000000000000000..3d6d5fa0c4d5fc670d8bec94e53a0f07a0a2e013 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -0,0 +1,207 @@ +* Allwinner sun8i GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: +- compatible: must be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun8i-v3s-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- interrupts: interrupt for the device +- interrupt-names: must be "macirq" +- clocks: A phandle to the reference clock for this device +- clock-names: must be "stmmaceth" +- resets: A phandle to the reset control for this device +- reset-names: must be "stmmaceth" +- phy-mode: See ethernet.txt +- phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 +- syscon: A phandle to the syscon of the SoC with one of the following + compatible string: + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - allwinner,sun8i-a83t-system-controller + +Optional properties: +- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) +- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) +Both delay properties need to be a multiple of 100. They control the delay for +external PHY. + +Optional properties for the following compatibles: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Required child node of emac: +- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" + +Required properties of the mdio node: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +The device node referenced by "phy" or "phy-handle" must be a child node +of the mdio node. See phy.txt for the generic PHY bindings. + +The following compatibles require that the emac node have a mdio-mux child +node called "mdio-mux": + - "allwinner,sun8i-h3-emac" + - "allwinner,sun8i-v3s-emac": +Required properties for the mdio-mux node: + - compatible = "allwinner,sun8i-h3-mdio-mux" + - mdio-parent-bus: a phandle to EMAC mdio + - one child mdio for the integrated mdio with the compatible + "allwinner,sun8i-h3-mdio-internal" + - one child mdio for the external mdio if present (V3s have none) +Required properties for the mdio-mux children node: + - reg: 1 for internal MDIO bus, 2 for external MDIO bus + +The following compatibles require a PHY node representing the integrated +PHY, under the integrated MDIO bus node if an mdio-mux node is used: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": + +Additional information regarding generic multiplexer properties can be found +at Documentation/devicetree/bindings/net/mdio-mux.txt + +Required properties of the integrated phy node: +- clocks: a phandle to the reference clock for the EPHY +- resets: a phandle to the reset control for the EPHY +- Must be a child of the integrated mdio + +Example with integrated PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + phy-is-integrated; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +Example with external PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }: + }; +}; + +Example with SoC without integrated PHY + +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 6f55bdd52f8a99be3c0741cf6411a00554c85778..f0dc94409107130d1279c2144c50eec7be122633 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -34,6 +34,19 @@ Optional properties: - fsl,err006687-workaround-present: If present indicates that the system has the hardware workaround for ERR006687 applied and does not need a software workaround. + -interrupt-names: names of the interrupts listed in interrupts property in + the same order. The defaults if not specified are + __Number of interrupts__ __Default__ + 1 "int0" + 2 "int0", "pps" + 3 "int0", "int1", "int2" + 4 "int0", "int1", "int2", "pps" + The order may be changed as long as they correspond to the interrupts + property. Currently, only i.mx7 uses "int1" and "int2". They correspond to + tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts. + For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse + per second interrupt associated with 1588 precision time protocol(PTP). + Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 16723535e1aa7cee73517739cfee3136f933fe29..c902261893b913f529b1ec8d9852048f9d711e59 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -17,6 +17,8 @@ Required properties: - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-r8a77970" for the R8A77970 SoC. + - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - "renesas,etheravb-rcar-gen3" as a fallback for the above R-Car Gen3 devices. @@ -40,7 +42,7 @@ Optional properties: - interrupt-parent: the phandle for the interrupt controller that services interrupts for this device. - interrupt-names: A list of interrupt names. - For the R8A779[56] SoCs this property is mandatory; + For the R-Car Gen 3 SoCs this property is mandatory; it should include one entry per channel, named "ch%u", where %u is the channel number ranging from 0 to 24. For other SoCs this property is optional; if present diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt index 0115c85a2425a148c011a77dd94bfb404382ff17..5172799a7f1a478d4eb0e834a8672806d87509e7 100644 --- a/Documentation/devicetree/bindings/net/sh_eth.txt +++ b/Documentation/devicetree/bindings/net/sh_eth.txt @@ -4,7 +4,8 @@ This file provides information on what the device node for the SH EtherMAC interface contains. Required properties: -- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. +- compatible: Must contain one or more of the following: + "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. "renesas,ether-r8a7743" if the device is a part of R8A7743 SoC. "renesas,ether-r8a7745" if the device is a part of R8A7745 SoC. "renesas,ether-r8a7778" if the device is a part of R8A7778 SoC. @@ -14,6 +15,14 @@ Required properties: "renesas,ether-r8a7793" if the device is a part of R8A7793 SoC. "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC. "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC. + "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device. + "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1 + device. + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. + - reg: offset and length of (1) the E-DMAC/feLic register block (required), (2) the TSU register block (optional). - interrupts: interrupt specifier for the sole interrupt. @@ -36,7 +45,8 @@ Optional properties: Example (Lager board): ethernet@ee700000 { - compatible = "renesas,ether-r8a7790"; + compatible = "renesas,ether-r8a7790", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupt-parent = <&gic>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index c3a7be6615c547a5001c67996e18458b7f8e5b5d..3a28a5d8857d16049815a86d6bcd047a372f98ba 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -12,7 +12,7 @@ Required properties: Valid interrupt names are: - "macirq" (combined signal for various interrupt events) - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection) - - "eth_lpi" (the interrupt that occurs when Tx or Rx enters/exits LPI state) + - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state) - phy-mode: See ethernet.txt file in the same directory. - snps,reset-gpio gpio number for phy reset. - snps,reset-active-low boolean flag to indicate if phy reset is active low. diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index b2bd4704f85928fe96ad43a6c9005d9f43b98907..86602f264dce234413c872218901f739bd605de9 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -20,7 +20,7 @@ Optional properties: Example: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index ef06d061913cfc1aa2d488073b53f9800fd33cd9..d69543701d5d58dad79bf41772eb1426d8f4efee 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -5,6 +5,7 @@ Required properties: "allwinner,sun4i-a10-sid" "allwinner,sun7i-a20-sid" "allwinner,sun8i-h3-sid" + "allwinner,sun50i-a64-sid" - reg: Should contain registers location and length @@ -13,13 +14,13 @@ Are child nodes of qfprom, bindings of which as described in bindings/nvmem/nvmem.txt Example for sun4i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10> }; Example for sun7i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200> }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index fafd85bd67a68575749975fc00642f7272cdf8fa..e3298e18de26b55580a8ec5e1241a8d32060d330 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -1,4 +1,4 @@ -= Amlogic eFuse device tree bindings = += Amlogic Meson GX eFuse device tree bindings = Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt new file mode 100644 index 0000000000000000000000000000000000000000..a3c63954a1a4e7dc66fd09373e8af6e13469ef5d --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt @@ -0,0 +1,22 @@ +Amlogic Meson6/Meson8/Meson8b efuse + +Required Properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson6-efuse" + - "amlogic,meson8-efuse" + - "amlogic,meson8b-efuse" +- reg: base address and size of the efuse registers +- clocks: a reference to the efuse core gate clock +- clock-names: must be "core" + +All properties and sub-nodes as well as the consumer bindings +defined in nvmem.txt in this directory are also supported. + + +Example: + efuse: nvmem@0 { + compatible = "amlogic,meson8-efuse"; + reg = <0x0 0x2000>; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt index 6462e12d8de6471117f9256ba7a3b14d6fcbcb5b..0415265c215a6480cc5e9389183783f36b2220c6 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt @@ -10,7 +10,7 @@ Required Properties: Example: -otp: otp@0301c800 { +otp: otp@301c800 { compatible = "brcm,ocotp"; reg = <0x0301c800 0x2c>; brcm,ocotp-size = <2048>; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 70d791b03ea13cf52936d6542289a52c991c38a1..f162c72b4e3655b9625532c01781699c273480e7 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt index b52bc11e959729a4f0eff29fce1e27136f776b3b..fd06c09b822b91b6aa0184d699df9b682884dc1f 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.txt +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -33,7 +33,7 @@ bits: Is pair of bit location and number of bits, which specifies offset For example: /* Provider */ - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { ... /* Data cells */ diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt index 4ad68b7f5c18bd48b3733730b70e551772e03add..26fe878d5c8688da2c86d8eb5c61b7c55ba7a815 100644 --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -12,7 +12,7 @@ bindings/nvmem/nvmem.txt Example: - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { compatible = "qcom,qfprom"; reg = <0x00700000 0x8000>; ... diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 1ff02afdc55a8afab456daa3b17dce7c2a97263c..60bec47828066cdd45c5104b126a6fbcb7a978f3 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -6,6 +6,7 @@ Required properties: - "rockchip,rk3188-efuse" - for RK3188 SoCs. - "rockchip,rk3228-efuse" - for RK3228 SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. + - "rockchip,rk3368-efuse" - for RK3368 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size - clocks: Should be the clock id of eFuse diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt new file mode 100644 index 0000000000000000000000000000000000000000..20bc49b49799dfa75b68ce910fd5f2d1b5700aad --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt @@ -0,0 +1,20 @@ +Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D +Secure Non-Volatile Storage. + +This DT node should be represented as a sub-node of a "syscon", +"simple-mfd" node. + +Required properties: +- compatible: should be one of the fallowing variants: + "fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S + "fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL + +Example: +snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt new file mode 100644 index 0000000000000000000000000000000000000000..eccf490d5a6d5dbeec7a78ae23db5ea088f1818c --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt @@ -0,0 +1,49 @@ += UniPhier eFuse device tree bindings = + +This UniPhier eFuse must be under soc-glue. + +Required properties: +- compatible: should be "socionext,uniphier-efuse" +- reg: should contain the register location and length + += Data cells = +Are child nodes of efuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld20-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + usb_mon: usb-mon@54 { + reg = <0x54 0xc>; + }; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + usb { + ... + nvmem-cells = <&usb_mon>; + nvmem-cell-names = "usb_mon"; + } diff --git a/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt new file mode 100644 index 0000000000000000000000000000000000000000..515b2f9542e548d7bb4dbc631307bcbe8bb304df --- /dev/null +++ b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt @@ -0,0 +1,42 @@ +* Synopsys DesignWare PCIe root complex in ECAM shift mode + +In some cases, firmware may already have configured the Synopsys DesignWare +PCIe controller in RC mode with static ATU window mappings that cover all +config, MMIO and I/O spaces in a [mostly] ECAM compatible fashion. +In this case, there is no need for the OS to perform any low level setup +of clocks, PHYs or device registers, nor is there any reason for the driver +to reconfigure ATU windows for config and/or IO space accesses at runtime. + +In cases where the IP was synthesized with a minimum ATU window size of +64 KB, it cannot be supported by the generic ECAM driver, because it +requires special config space accessors that filter accesses to device #1 +and beyond on the first bus. + +Required properties: +- compatible: "marvell,armada8k-pcie-ecam" or + "socionext,synquacer-pcie-ecam" or + "snps,dw-pcie-ecam" (must be preceded by a more specific match) + +Please refer to the binding document of "pci-host-ecam-generic" in the +file host-generic-pci.txt for a description of the remaining required +and optional properties. + +Example: + + pcie1: pcie@7f000000 { + compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; + device_type = "pci"; + reg = <0x0 0x7f000000 0x0 0xf00000>; + bus-range = <0x0 0xe>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>, + <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>, + <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>; + + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 0x0 182 0x4>; + msi-map = <0x0 &its 0x0 0x10000>; + dma-coherent; + }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt new file mode 100644 index 0000000000000000000000000000000000000000..c84bc027930b903bfaa3413f00daff061f39c366 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -0,0 +1,68 @@ +HiSilicon STB PCIe host bridge DT description + +The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core. +It shares common functions with the DesignWare PCIe core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt. + +Additional properties are described here: + +Required properties +- compatible: Should be one of the following strings: + "hisilicon,hi3798cv200-pcie" +- reg: Should contain sysctl, rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "control": control registers of PCIe controller; + "rc-dbi": configuration space of PCIe controller; + "config": configuration transaction space of PCIe controller. +- bus-range: PCI bus numbers covered. +- interrupts: MSI interrupt. +- interrupt-names: Must include "msi" entries. +- clocks: List of phandle and clock specifier pairs as listed in clock-names + property. +- clock-name: Must include the following entries: + "aux": auxiliary gate clock; + "pipe": pipe gate clock; + "sys": sys gate clock; + "bus": bus gate clock. +- resets: List of phandle and reset specifier pairs as listed in reset-names + property. +- reset-names: Must include the following entries: + "soft": soft reset; + "sys": sys reset; + "bus": bus reset. + +Optional properties: +- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- phys: List of phandle and phy mode specifier, should be 0. +- phy-names: Must be "phy". + +Example: + pcie@f9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0xf9860000 0x1000>, + <0xf0000000 0x2000>, + <0xf2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges=<0x81000000 0 0 0xf4000000 0 0x00010000 + 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg PCIE_AUX_CLK>, + <&crg PCIE_PIPE_CLK>, + <&crg PCIE_SYS_CLK>, + <&crg PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + }; diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index c0484da0f20d9d87f3be44f9bfd844362820bb59..66df1e81e0b8d218ad39396e41be2c2d2e504f5c 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -18,6 +18,7 @@ Required properties: "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" + "fsl,ls1012a-pcie" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 982a74ea6df9b31a2cbbb076e5359ae33026f506..145a4f04194fa053f069e478bad6f0a59feb00b1 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -1,10 +1,15 @@ NVIDIA Tegra PCIe controller Required properties: -- compatible: For Tegra20, must contain "nvidia,tegra20-pcie". For Tegra30, - "nvidia,tegra30-pcie". For Tegra124, must contain "nvidia,tegra124-pcie". - Otherwise, must contain "nvidia,-pcie", plus one of the above, where - is tegra132 or tegra210. +- compatible: Must be: + - "nvidia,tegra20-pcie": for Tegra20 + - "nvidia,tegra30-pcie": for Tegra30 + - "nvidia,tegra124-pcie": for Tegra124 and Tegra132 + - "nvidia,tegra210-pcie": for Tegra210 + - "nvidia,tegra186-pcie": for Tegra186 +- power-domains: To ungate power partition by BPMP powergate driver. Must + contain BPMP phandle and PCIe power partition ID. This is required only + for Tegra186. - device_type: Must be "pci" - reg: A list of physical base address and length for each set of controller registers. Must contain an entry for each entry in the reg-names property. @@ -124,6 +129,16 @@ Power supplies for Tegra210: - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must supply 1.8 V. +Power supplies for Tegra186: +- Required: + - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must + supply 1.8 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 1.8 V. + - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must + supply 1.8 V. + Root ports are defined as subnodes of the PCIe controller node. Required properties: @@ -255,7 +270,7 @@ Tegra30: SoC DTSI: - pcie-controller@00003000 { + pcie-controller@3000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -334,7 +349,7 @@ SoC DTSI: Board DTS: - pcie-controller@00003000 { + pcie-controller@3000 { status = "okay"; avdd-pexa-supply = <&ldo1_reg>; @@ -360,7 +375,7 @@ Tegra124: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -425,7 +440,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; @@ -456,7 +471,7 @@ Tegra210: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -521,7 +536,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avdd-pll-uerefe-supply = <&avdd_1v05_pll>; @@ -546,3 +561,114 @@ Board DTS: status = "okay"; }; }; + +Tegra186: +--------- + +SoC DTSI: + + pcie@10003000 { + compatible = "nvidia,tegra186-pcie"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; + device_type = "pci"; + reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ + 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + + clocks = <&bpmp TEGRA186_CLK_AFI>, + <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "afi", "pex", "pll_e"; + + resets = <&bpmp TEGRA186_RESET_AFI>, + <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_PCIEXCLK>; + reset-names = "afi", "pex", "pcie_x"; + + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie@10003000 { + status = "okay"; + + dvdd-pex-supply = <&vdd_pex>; + hvdd-pex-pll-supply = <&vdd_1v8>; + hvdd-pex-supply = <&vdd_1v8>; + vddio-pexctl-aud-supply = <&vdd_1v8>; + + pci@1,0 { + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + nvidia,num-lanes = <0>; + status = "disabled"; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 3d038638612b8ec2af704adaf6dcd5b0bc81b1e6..9fe7e12a7bf37b7c874a3e93bea590452845d093 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -60,17 +60,15 @@ Example SoC configuration: 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; - pci@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; - pci@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; }; diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt index 30b364e504ba9942ac316eaf0afc1132a83cd255..11063293f76190dd9662849bf97c9abe5e61624d 100644 --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -2,14 +2,75 @@ V3 Semiconductor V360 EPC PCI bridge This bridge is found in the ARM Integrator/AP (Application Platform) -Integrator-specific notes: +Required properties: +- compatible: should be one of: + "v3,v360epc-pci" + "arm,integrator-ap-pci", "v3,v360epc-pci" +- reg: should contain two register areas: + first the base address of the V3 host bridge controller, 64KB + second the configuration area register space, 16MB +- interrupts: should contain a reference to the V3 error interrupt + as routed on the system. +- bus-range: see pci.txt +- ranges: this follows the standard PCI bindings in the IEEE Std + 1275-1994 (see pci.txt) with the following restriction: + - The non-prefetchable and prefetchable memory windows must + each be exactly 256MB (0x10000000) in size. + - The prefetchable memory window must be immediately adjacent + to the non-prefetcable memory window +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, + 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked + as pre-fetchable. Two ranges are supported by the hardware. -- syscon: should contain a link to the syscon device node (since +Integrator-specific required properties: +- syscon: should contain a link to the syscon device node, since on the Integrator, some registers in the syscon are required to - operate the V3). + operate the V3 host bridge. -V360 EPC specific notes: +Example: -- reg: should contain the base address of the V3 adapter. -- interrupts: should contain a reference to the V3 error interrupt - as routed on the system. +pci: pciv3@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ + 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt new file mode 100644 index 0000000000000000000000000000000000000000..24a0d06acd1d3508a4b45d2df8dff0c9141018b3 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt @@ -0,0 +1,43 @@ +Broadcom STB USB PHY + +Required properties: + - compatible: brcm,brcmstb-usb-phy + - reg: two offset and length pairs. + The first pair specifies a manditory set of memory mapped + registers used for general control of the PHY. + The second pair specifies optional registers used by some of + the SoCs that support USB 3.x + - #phy-cells: Shall be 1 as it expects one argument for setting + the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + +Optional Properties: +- clocks : clock phandles. +- clock-names: String, clock name. +- brcm,ipp: Boolean, Invert Port Power. + Possible values are: 0 (Don't invert), 1 (Invert) +- brcm,ioc: Boolean, Invert Over Current detection. + Possible values are: 0 (Don't invert), 1 (Invert) +NOTE: one or both of the following two properties must be set +- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. +- dr_mode: String, PHY Device mode. + Possible values are: "host", "peripheral ", "drd" or "typec-pd" + If this property is not defined, the phy will default to "host" mode. + +Example: + +usbphy_0: usb-phy@f0470200 { + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + compatible = "brcm,brcmstb-usb-phy"; + #phy-cells = <1>; + dr_mode = "host" + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt index 761c4bc24a9b4612f15f58dd7d24da82a5838802..10efff28b52b247161e5bce5e7abb37ae39e07e0 100644 --- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -15,7 +15,7 @@ Required properties For the child node: - #phy-cells: must be 0 Example: - pcie_phy: phy@0301d0a0 { + pcie_phy: phy@301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt index 97977cd29a9889b40b37dd7cfbbec3a84036a51a..0aced97d8092abedfd9684981fa0f5e7d1697dde 100644 --- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -27,7 +27,16 @@ Sub-nodes optional properties: This property is not applicable for "brcm,iproc-ns2-sata-phy", "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". -Example: +- brcm,rxaeq-mode: string that indicates the desired RX equalizer + mode, possible values are: + "off" (equivalent to not specifying the property) + "auto" + "manual" (brcm,rxaeq-value is used in that case) + +- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX + equalizer value that should be used. Allowed range is 0..63. + +Example sata-phy@f0458100 { compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 1d25b04cd05e176a91dd53a75cd10a3020f16120..6ac98b3b5f57b5a9e8dff47c0d51ce1dd7562ab9 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -23,7 +23,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@020c9000 { +usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index 91da947ae9b6205fa4cf6fb233e5218abb62b1d0..eeb9e1874ea627f7cadaa90439f963b25dc6e8dd 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -4,10 +4,13 @@ This file provides information on what the device node for the R-Car generation 2 USB PHY contains. Required properties: -- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. +- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. + "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. + "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. - "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device. + "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or + RZ/G1 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index ace9cce2704a889525c1fd8219501d2bb1329b7f..99b651b33110361ed1cf94bc4859ed400b2a4977 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -8,6 +8,8 @@ Required properties: SoC. "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 SoC. + "renesas,usb2-phy-r8a77995" if the device is a part of an + R8A77995 SoC. "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index f9853156e311fb1180a373cb8ed93a293ff59c9b..64f7109aea1f79f11f046de4119e7147fc1b2ca5 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -25,7 +25,7 @@ It is recommended to list all clocks and resets available. The driver will only use those matching the phy_type. Example: - usbphy1: phy@00a01800 { + usbphy1: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 6f2ec9af0de288af23bd42d5138d56d990efce41..09789fdfa749e356576ed654cecdb1473983b514 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -89,7 +89,7 @@ Optional subnode-properties: Examples: -pio: pinctrl@01c20800 { +pio: pinctrl@1c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt index 61466c58faae3b0ed384fe08cd7e1604fdd9f2e1..d857b67fab72a61fcf85b8eed6fd389883d4c097 100644 --- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt @@ -9,8 +9,14 @@ The pin controller node must be a subnode of the system controller node. Required properties: - compatible: "cortina,gemini-pinctrl" -Subnodes of the pin controller contain pin control multiplexing set-up. -Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes. +Subnodes of the pin controller contain pin control multiplexing set-up +and pin configuration of individual pins. + +Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes +and generic pin config nodes. + +Supported configurations: +- skew-delay is supported on the Ethernet pins Example: diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index 42d74f8a1bccfea6c2f701af9c9f63dad04e975f..a1050b5982ec307d2769e804f107b4b2659670c1 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -58,14 +58,14 @@ Some requirements for using fsl,imx-pinctrl binding: configurations by referring to the phandle of that pin configuration node. Examples: -usdhc@0219c000 { /* uSDHC4 */ +usdhc@219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_1>; }; -iomuxc@020e0000 { +iomuxc@20e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt index 51b943cc9770e1b096e3def62c3e902c4ce02772..cf9ccdff445512a2ffb58239ad82360c452e5ff4 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -89,7 +89,7 @@ Valid values for pin and group names are: Example: - pinctrl_pdc: pinctrl@02006500 { + pinctrl_pdc: pinctrl@2006500 { #gpio-range-cells = <3>; compatible = "img,tz1090-pdc-pinctrl"; reg = <0x02006500 0x100>; @@ -121,7 +121,7 @@ Example board file extracts: }; }; - ir: ir@02006200 { + ir: ir@2006200 { pinctrl-names = "default"; pinctrl-0 = <&irmod_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 509faa87ad0e92ed3d40dbd7e2b238acfa627d3c..2dfd9a3fc1e470122573110a1daf938006affb0d 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -197,7 +197,7 @@ Valid values for pin and group names are: Example: - pinctrl: pinctrl@02005800 { + pinctrl: pinctrl@2005800 { #gpio-range-cells = <3>; compatible = "img,tz1090-pinctrl"; reg = <0x02005800 0xe4>; @@ -221,7 +221,7 @@ Example board file extract: }; }; - uart@02004b00 { + uart@2004b00 { pinctrl-names = "default"; pinctrl-0 = <&uart0_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index f64060908d5ae173e39ec3440f9bbdd3350065ef..c7c088d2dd503df005904b46a486d75e437e37e9 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -97,8 +97,8 @@ group spi_quad - pins 15-16 - functions spi, gpio -group uart_2 - - pins 9-10 +group uart2 + - pins 9-10 and 18-19 - functions uart, gpio Available groups and functions for the South bridge: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 4048f43a9d29bfa96269fa4d87828dc313088a70..02e971c39d815ea11f0baf45bb66091cbcb10bf1 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -97,7 +97,7 @@ SoC file extract: Board file extract: ------------------- - pcie-controller@01003000 { + pcie-controller@1003000 { ... phys = <&padctl 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 4483cc31e5310a234a075d34b879f957596846fc..ad9bbbba36e9d529481f1d9b265b29dbf15d372c 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -271,6 +271,10 @@ output-high - set the pin to output mode with high level sleep-hardware-state - indicate this is sleep related state which will be programmed into the registers for the sleep state. slew-rate - set the slew rate +skew-delay - this affects the expected clock skew on input pins + and the delay before latching a value to an output + pin. Typically indicates how many double-inverters are + used to delay the signal. For example: diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt similarity index 66% rename from Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt rename to Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index c934106b10aa2828baf2c71f42c080a02a0b122a..9c451c20dda47c390101024dc247b10f0d7f5c10 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -13,6 +13,7 @@ Required properties: - "microchip,mcp23s18" for 16 GPIO SPI version - "microchip,mcp23008" for 8 GPIO I2C version or - "microchip,mcp23017" for 16 GPIO I2C version of the chip + - "microchip,mcp23018" for 16 GPIO I2C version NOTE: Do not use the old mcp prefix any more. It is deprecated and will be removed. - #gpio-cells : Should be two. @@ -81,3 +82,61 @@ gpiom1: gpio@0 { reg = <0>; spi-max-frequency = <1000000>; }; + +Pull-up configuration +===================== + +If pins are used as output, they can also be configured with pull-ups. This is +done with pinctrl. + +Please refer file +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per . +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + . + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- pins: List of pins. Valid values of pins properties are: + gpio0 ... gpio7 for the devices with 8 GPIO pins and + gpio0 ... gpio15 for the devices with 16 GPIO pins. + +Optional properties: +------------------- +The following optional property is defined in the pinmux DT binding document +. Absence of this property will leave the configuration +in its default state. + bias-pull-up + +Example with pinctrl to pull-up output pins: +gpio21: gpio@21 { + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <0x2>; + reg = <0x21>; + interrupt-parent = <&socgpio>; + interrupts = <0x17 0x8>; + interrupt-names = "mcp23017@21 irq"; + interrupt-controller; + #interrupt-cells = <0x2>; + microchip,irq-mirror; + pinctrl-names = "default"; + pinctrl-0 = <&i2cgpio0irq &gpio21pullups>; + + gpio21pullups: pinmux { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + bias-pull-up; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 37d744750579aa0cb027e14b2733a3533086c3e4..231fa1db7c5e2647aca3d21b54760e81ae4e3bdf 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -86,7 +86,7 @@ Examples: reg = <0 0x1020C020 0 0x1000>; }; - pinctrl@01c20800 { + pinctrl@1c20800 { compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt index 013c675b5b64544b6e59e6758f0ff3e24e8a99ee..48b9be48af18fc2dfeda3866bbd67548e7c626bd 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt @@ -89,7 +89,7 @@ Example: interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt index e312a71b2f94fcab78cdbcfeba3ea27c6c5798dc..aaf01e929eeab2b0398dd52c1aa5f90855a21614 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -175,7 +175,7 @@ to specify in a pin configuration subnode: Example: - tlmm: pinctrl@01010000 { + tlmm: pinctrl@1010000 { compatible = "qcom,msm8996-pinctrl"; reg = <0x01010000 0x300000>; interrupts = <0 208 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 5b12c57e7f022e58ba262191246f23b4852cc7df..5c25fcb29fb5e636685539d50133d14a7c6aebc2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -15,6 +15,7 @@ PMIC's from Qualcomm. "qcom,pm8921-gpio" "qcom,pm8941-gpio" "qcom,pm8994-gpio" + "qcom,pmi8994-gpio" "qcom,pma8084-gpio" "qcom,pmi8994-gpio" @@ -85,6 +86,7 @@ to specify in a pin configuration subnode: gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 + gpio1-gpio10 for pmi8994 gpio1-gpio22 for pma8084 gpio1-gpio10 for pmi8994 diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt index 43e21474528a4158f77f6b94bddfa57f1a1fa7f5..fd3696eb36bf307e00f061cc8f5329d2afa8594c 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt @@ -12,8 +12,10 @@ Pin controller node ------------------- Required properties: - - compatible - this shall be "renesas,r7s72100-ports". + - compatible: should be: + - "renesas,r7s72100-ports": for RZ/A1H + - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M + - "renesas,r7s72102-ports": for RZ/A1L - reg address base and length of the memory area where the pin controller diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index 33e3d3c475526e404a8b03c7769aa66d61b88e3e..58c2a4c229db18db99c09bbd88eb6d015183421e 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -143,6 +143,24 @@ Required properties: * 16 : Alternate Function 15 * 17 : Analog + To simplify the usage, macro is available to generate "pinmux" field. + This macro is available here: + - include/dt-bindings/pinctrl/stm32-pinfunc.h + + Some examples of using macro: + /* GPIO A9 set as alernate function 2 */ + ... { + pinmux = ; + }; + /* GPIO A9 set as GPIO */ + ... { + pinmux = ; + }; + /* GPIO A9 set as analog */ + ... { + pinmux = ; + }; + Optional properties: - GENERIC_PINCONFIG: is the generic pinconfig options to use. Available options are: @@ -165,13 +183,13 @@ pin-controller { ... usart1_pins_a: usart1@0 { pins1 { - pinmux = ; + pinmux = ; bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; bias-disable; }; }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt new file mode 100644 index 0000000000000000000000000000000000000000..1cd050b4054ca28295417595c732825a534b091a --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt @@ -0,0 +1,61 @@ +Amlogic Meson Power Controller +============================== + +The Amlogic Meson SoCs embeds an internal Power domain controller. + +VPU Power Domain +---------------- + +The Video Processing Unit power domain is controlled by this power controller, +but the domain requires some external resources to meet the correct power +sequences. +The bindings must respect the power domain bindings as described in the file +power_domain.txt + +Device Tree Bindings: +--------------------- + +Required properties: +- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs +- #power-domain-cells: should be 0 +- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node +- resets: phandles to the reset lines needed for this power demain sequence + as described in ../reset/reset.txt +- clocks: from common clock binding: handle to VPU and VAPB clocks +- clock-names: from common clock binding: must contain "vpu", "vapb" + corresponding to entry in the clocks property. + +Parent node should have the following properties : +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" +- reg: base address and size of the AO system control register space. + +Example: +------- + +ao_sysctrl: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + }; +}; + + diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index 6c1498958d48c0221ff2d7731051f5f82ea5fe85..e371b262d7093ff8390f422619dba08c092f201f 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -40,7 +40,7 @@ Optional properties: Example: - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, @@ -80,7 +80,7 @@ that is a phandle pointing to the power domain the device belongs to. Example of a device that is part of the PU power domain: - vpu: vpu@02040000 { + vpu: vpu@2040000 { reg = <0x02040000 0x3c000>; /* ... */ power-domains = <&pd_pu>; diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt index af21502e939c4b1f6866e80f7325342833b133c0..f747f95eee582419178f2b5fb5ca500b2c9bb137 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be "renesas,-apmu", "renesas,apmu" as fallback. Examples with soctypes are: - "renesas,r8a7743-apmu" (RZ/G1M) + - "renesas,r8a7745-apmu" (RZ/G1E) - "renesas,r8a7790-apmu" (R-Car H2) - "renesas,r8a7791-apmu" (R-Car M2-W) - "renesas,r8a7792-apmu" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index 98cc8c09d02d5d857992250fd61a0199359e5933..8690f10426a3654333ef0f48f55f90422a0d64f6 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -17,6 +17,7 @@ Required properties: - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) - "renesas,r8a7796-sysc" (R-Car M3-W) + - "renesas,r8a77970-sysc" (R-Car V3M) - "renesas,r8a77995-sysc" (R-Car D3) - reg: Address start and address range for the device. - #power-domain-cells: Must be 1. diff --git a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt index dc7c9bad63eaddd866b60d3ca737ac9ed0604ad4..1b81fcd9fb720cdfe944c275a8b2e27fc17507cd 100644 --- a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt @@ -10,7 +10,7 @@ Required Properties: -reg: Specifies the physical address of the SNVS_LPCR register Example: - snvs@020cc000 { + snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt index c82f12e2d85c02e6e7819fab16d51ff9f7ef79a7..c5c03789ed1e2a0f09a17ac4768f9cf8405f00b2 100644 --- a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt @@ -37,12 +37,12 @@ Example 1: Setup keystone reset so that in case software reset or WDT0 is triggered it issues hard reset for SoC. -pllctrl: pll-controller@02310000 { +pllctrl: pll-controller@2310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; -devctrl: device-state-control@02620000 { +devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt new file mode 100644 index 0000000000000000000000000000000000000000..4b2195571a49e9c3338f2b2cfe68ba58450cc0a7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt @@ -0,0 +1,66 @@ +Binding for sbs-manager + +Required properties: +- compatible: ",", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. +- reg: integer, i2c address of the device. Should be <0xa>. +Optional properties: +- gpio-controller: Marks the port as GPIO controller. + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. +- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell + is used to specify optional parameters: + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. + +From OS view the device is basically an i2c-mux used to communicate with up to +four smart battery devices at address 0xb. The driver actually implements this +behaviour. So standard i2c-mux nodes can be used to register up to four slave +batteries. Channels will be numerated starting from 1 to 4. + +Example: + +batman@a { + compatible = "lltc,ltc1760", "sbs,sbs-manager"; + reg = <0x0a>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 1 1>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 2 1>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 3 1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt new file mode 100644 index 0000000000000000000000000000000000000000..9780957c91153abec0f861cb7984aa52e756e4cb --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt @@ -0,0 +1,47 @@ +Texas Instruments SmartReflex binding + +SmartReflex is used to set and adjust the SoC operating points. + + +Required properties: + +compatible: Shall be one of the following: + "ti,omap3-smartreflex-core" + "ti,omap3-smartreflex-iva" + "ti,omap4-smartreflex-core" + "ti,omap4-smartreflex-mpu" + "ti,omap4-smartreflex-iva" + +reg: Shall contain the device instance IO range + +interrupts: Shall contain the device instance interrupt + + +Optional properties: + +ti,hwmods: Shall contain the TI interconnect module name if needed + by the SoC + + +Example: + + smartreflex_iva: smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = ; + ti,hwmods = "smartreflex_iva"; + }; + + smartreflex_core: smartreflex@4a0dd000 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x4a0dd000 0x80>; + interrupts = ; + ti,hwmods = "smartreflex_core"; + }; + + smartreflex_mpu: smartreflex@4a0d9000 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x4a0d9000 0x80>; + interrupts = ; + ti,hwmods = "smartreflex_mpu"; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt index 0f766333b6ebd61298010a08db851a2244edd0bd..37f91fa576545aa245d893c24248bdbb2c0fcc07 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt @@ -8,7 +8,7 @@ Required properties: Example: -mcu@0a { +mcu@a { #gpio-cells = <2>; compatible = "fsl,mc9s08qg8-mpc8349emitx", "fsl,mcu-mpc8349emitx"; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index c5171660eaf9823ec6704ee17a784807016e7e50..51ff54c8b8ef4e7b4de9e0470e4c06a7bf736b03 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -14,7 +14,7 @@ Required properties: Example: - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt index 0dded64d89d3bf198f3e2ab2f6daf9a92b414728..e9f7578ca09a2babc5c0a87e75bde6eb0ee2af37 100644 --- a/Documentation/devicetree/bindings/regulator/max77686.txt +++ b/Documentation/devicetree/bindings/regulator/max77686.txt @@ -40,7 +40,7 @@ to get matched with their hardware counterparts as follow: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 879e98d3b9aa9c8a56492d724e889e64fc2e50fd..b82943d836770abd95819ab13236f3599f700407 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -71,7 +71,7 @@ has not been disabled for that state using "regulator-off-in-suspend". Example: - max77802@09 { + max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 7ff3f7903f267c9dd8d20983d461c7f344ca7ba6..00d3d58a102fe6da2ed0b70b7ce2d61772b17822 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -10,6 +10,7 @@ on the Qualcomm Hexagon core. "qcom,q6v5-pil", "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" + "qcom,msm8996-mss-pil" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt new file mode 100644 index 0000000000000000000000000000000000000000..8562ba1dce69253bd7cfb6a9c8dd115d297d2b76 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt @@ -0,0 +1,51 @@ +Qualcomm Remote File System Memory binding + +This binding describes the Qualcomm remote filesystem memory, which serves the +purpose of describing the shared memory region used for remote processors to +access block device data using the Remote Filesystem protocol. + +- compatible: + Usage: required + Value type: + Definition: must be: + "qcom,rmtfs-mem" + +- reg: + Usage: required for static allocation + Value type: + Definition: must specify base address and size of the memory region, + as described in reserved-memory.txt + +- size: + Usage: required for dynamic allocation + Value type: + Definition: must specify a size of the memory region, as described in + reserved-memory.txt + +- qcom,client-id: + Usage: required + Value type: + Definition: identifier of the client to use this region for buffers. + +- qcom,vmid: + Usage: optional + Value type: + Definition: vmid of the remote processor, to set up memory protection. + += EXAMPLE +The following example shows the remote filesystem memory setup for APQ8016, +with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000. + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt index c8f775714887861d92b7e014252b1b4104fb2c5b..4ca66c96fe97e7b98da4eba0cbdcf6158ffac35c 100644 --- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt +++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt @@ -14,7 +14,7 @@ Required properties: example: -ahb1_rst: reset@01c202c0 { +ahb1_rst: reset@1c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-ahb1-reset"; reg = <0x01c202c0 0xc>; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt index 13301777e11c1394f2974d34078c3f8dc45dc61b..6ed79e60248a73e3cc1f58b1a91d3f770f9082f6 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt @@ -14,7 +14,7 @@ Required properties: example: -src: src@020d8000 { +src: src@20d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; @@ -33,10 +33,10 @@ reset.txt example: - ipu1: ipu@02400000 { + ipu1: ipu@2400000 { resets = <&src 2>; }; - ipu2: ipu@02800000 { + ipu2: ipu@2800000 { resets = <&src 4>; }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt index e5a03ffe04fb2af74ed41b7aa36aee284edc437a..a8014f3ab8ba19afb5989b369403a2f5b42bcc40 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt @@ -26,6 +26,7 @@ Required properties: - "renesas,r8a7794-rst" (R-Car E2) - "renesas,r8a7795-rst" (R-Car H3) - "renesas,r8a7796-rst" (R-Car M3-W) + - "renesas,r8a77970-rst" (R-Car V3M) - "renesas,r8a77995-rst" (R-Car D3) - reg: Address start and address range for the device. diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt new file mode 100644 index 0000000000000000000000000000000000000000..32d8435a41dfbf088344e158cf8c07d10ec9eb09 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt @@ -0,0 +1,33 @@ +Binding for the AXS10x reset controller + +This binding describes the ARC AXS10x boards custom IP-block which allows +to control reset signals of selected peripherals. For example DW GMAC, etc... +This block is controlled via memory-mapped register (AKA CREG) which +represents up-to 32 reset lines. + +As of today only the following lines are used: + - DW GMAC - line 5 + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,axs10x-reset". +- reg: should always contain pair address - length: for creg reset + bits register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset 5>; + .... + }; diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt index c516d24959f29e768a1503323fcdc247e4916609..86945502ccb509279e7d30e719a03a6c160a2038 100644 --- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -67,7 +67,7 @@ using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 / { soc { - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { compatible = "syscon", "simple-mfd"; reg = <0x02350000 0x1000>; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 68a6f487c4092f205eb4cae09ca962195c15c06e..93efed629900c65f9c9b1d74265cb4d2c7936245 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -13,6 +13,7 @@ Required properties: "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-reset" - for LD11 SoC "socionext,uniphier-ld20-reset" - for LD20 SoC + "socionext,uniphier-pxs3-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -44,6 +45,7 @@ Required properties: "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) "socionext,uniphier-ld20-sd-reset" - for LD20 SoC + "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -74,6 +76,7 @@ Required properties: "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-peri-reset" - for LD11 SoC "socionext,uniphier-ld20-peri-reset" - for LD20 SoC + "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt new file mode 100644 index 0000000000000000000000000000000000000000..adf7b7af5dc35532c488398c28ccb14b4237b0ff --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/cpus.txt @@ -0,0 +1,162 @@ +=================== +RISC-V CPU Bindings +=================== + +The device tree allows to describe the layout of CPUs in a system through +the "cpus" node, which in turn contains a number of subnodes (ie "cpu") +defining properties for every cpu. + +Bindings for CPU nodes follow the Devicetree Specification, available from: + +https://www.devicetree.org/specifications/ + +with updates for 32-bit and 64-bit RISC-V systems provided in this document. + +=========== +Terminology +=========== + +This document uses some terminology common to the RISC-V community that is not +widely used, the definitions of which are listed here: + +* hart: A hardware execution context, which contains all the state mandated by + the RISC-V ISA: a PC and some registers. This terminology is designed to + disambiguate software's view of execution contexts from any particular + microarchitectural implementation strategy. For example, my Intel laptop is + described as having one socket with two cores, each of which has two hyper + threads. Therefore this system has four harts. + +===================================== +cpus and cpu node bindings definition +===================================== + +The RISC-V architecture, in accordance with the Devicetree Specification, +requires the cpus and cpu nodes to be present and contain the properties +described below. + +- cpus node + + Description: Container of cpu nodes + + The node name must be "cpus". + + A cpus node must define the following properties: + + - #address-cells + Usage: required + Value type: + Definition: must be set to 1 + - #size-cells + Usage: required + Value type: + Definition: must be set to 0 + +- cpu node + + Description: Describes a hart context + + PROPERTIES + + - device_type + Usage: required + Value type: + Definition: must be "cpu" + - reg + Usage: required + Value type: + Definition: The hart ID of this CPU node + - compatible: + Usage: required + Value type: + Definition: must contain "riscv", may contain one of + "sifive,rocket0" + - mmu-type: + Usage: optional + Value type: + Definition: Specifies the CPU's MMU type. Possible values are + "riscv,sv32" + "riscv,sv39" + "riscv,sv48" + - riscv,isa: + Usage: required + Value type: + Definition: Contains the RISC-V ISA string of this hart. These + ISA strings are defined by the RISC-V ISA manual. + +Example: SiFive Freedom U540G Development Kit +--------------------------------------------- + +This system contains two harts: a hart marked as disabled that's used for +low-level system tasks and should be ignored by Linux, and a second hart that +Linux is allowed to run on. + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <1000000>; + cpu@0 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + next-level-cache = <&L15 &L0>; + reg = <0>; + riscv,isa = "rv64imac"; + status = "disabled"; + L10: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu@1 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + next-level-cache = <&L15 &L0>; + reg = <1>; + riscv,isa = "rv64imafdc"; + status = "okay"; + tlb-split; + L13: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + +Example: Spike ISA Simulator with 1 Hart +---------------------------------------- + +This device tree matches the Spike ISA golden model as run with `spike -p1`. + + cpus { + cpu@0 { + device_type = "cpu"; + reg = <0x00000000>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + clock-frequency = <0x3b9aca00>; + interrupt-controller { + #interrupt-cells = <0x00000001>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + } + } + } diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt index e25a456664b919c5317df407181df43bd61dd1ea..0014da9145af73f64218dd5f335863421474ca22 100644 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt @@ -1,7 +1,9 @@ HWRNG support for the iproc-rng200 driver Required properties: -- compatible : "brcm,iproc-rng200" +- compatible : Must be one of: + "brcm,bcm7278-rng200" + "brcm,iproc-rng200" - reg : base address and size of control register block Example: diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt deleted file mode 100644 index 916f57601a8ff44a4995eece753798eafe118063..0000000000000000000000000000000000000000 --- a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Dallas DS1339 I2C Serial Real-Time Clock - -Required properties: -- compatible: Should contain "dallas,ds1339". -- reg: I2C address for chip - -Optional properties: -- trickle-resistor-ohms : Selected resistor for trickle charger - Values usable for ds1339 are 250, 2000, 4000 - Should be given if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode - Should be given if internal trickle charger diode should be disabled -Example: - ds1339: rtc@68 { - compatible = "dallas,ds1339"; - trickle-resistor-ohms = <250>; - reg = <0x68>; - }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt new file mode 100644 index 0000000000000000000000000000000000000000..d28d6e7f6ae89ef89a0c4012127324bad5cb9716 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt @@ -0,0 +1,44 @@ +Dallas DS1307 and compatible RTC + +Required properties: +- compatible: should be one of: + "dallas,ds1307", + "dallas,ds1308", + "dallas,ds1337", + "dallas,ds1338", + "dallas,ds1339", + "dallas,ds1388", + "dallas,ds1340", + "dallas,ds1341", + "maxim,ds3231", + "st,m41t0", + "st,m41t00", + "microchip,mcp7940x", + "microchip,mcp7941x", + "pericom,pt7c4338", + "epson,rx8025", + "isil,isl12057" +- reg: I2C bus address of the device + +Optional properties: +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm +- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only + Selected resistor for trickle charger + Possible values are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- trickle-diode-disable : ds1339, ds1340 and ds 1388 only + Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled + +Example: + rtc1: ds1339@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupt-parent = <&gpio4>; + interrupts = <20 0>; + trickle-resistor-ohms = <250>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt new file mode 100644 index 0000000000000000000000000000000000000000..717d93860af1e42e283e4449f90dabfb652d9772 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt @@ -0,0 +1,31 @@ +ST M41T80 family of RTC and compatible + +Required properties: +- compatible: should be one of: + "st,m41t62", + "st,m41t65", + "st,m41t80", + "st,m41t81", + "st,m41t81s", + "st,m41t82", + "st,m41t83", + "st,m41t84", + "st,m41t85", + "st,m41t87", + "microcrystal,rv4162", +- reg: I2C bus address of the device + +Optional properties: +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm + +Example: + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..58885b55da21360187dd836c53690d33a8de9066 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt @@ -0,0 +1,13 @@ +SiRFSoC Real Time Clock + +Required properties: +- compatible: must be "sirf,prima2-sysrtc" +- reg: address range of rtc register set. +- interrupts: rtc alarm interrupts. + +Example: + rtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt new file mode 100644 index 0000000000000000000000000000000000000000..3ebeb311335ff6c4ff25020d86c04a88bb6a72cb --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt @@ -0,0 +1,17 @@ +ST-Ericsson COH 901 331 Real Time Clock + +Required properties: +- compatible: must be "stericsson,coh901331" +- reg: address range of rtc register set. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clocks: phandle to the rtc clock source + +Example: + rtc: rtc@c0017000 { + compatible = "stericsson,coh901331"; + reg = <0xc0017000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <10>; + clocks = <&rtc_clk>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt index d5e26d313f62624abb929c1334d2a9b1b77a73b2..12c083c1140a33962fa4ef120e0c3cae9af33bea 100644 --- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt @@ -17,7 +17,7 @@ Required properties for new device trees Example: -rtc: rtc@01f00000 { +rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <0 40 4>, <0 41 4>; diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt index 6983aad376c3f2f7470c84d9978d04848e1317df..4a8d79c1cf08167dd036d19a8b83c18d80b8d8f7 100644 --- a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt @@ -10,7 +10,7 @@ Required properties: Example: -rtc: rtc@01c20d00 { +rtc: rtc@1c20d00 { compatible = "allwinner,sun4i-a10-rtc"; reg = <0x01c20d00 0x20>; interrupts = <24>; diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index e6e6142e33ac8187f71822ab33467bd1da9c155b..7c0d6b2f53e4c96ae8855746733cbbf1cbeaa11a 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -24,6 +24,7 @@ Optional properties: - dma-names: "rx" for RX channel, "tx" for TX channel. - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable USARTs. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt compatible description: - at91rm9200: legacy USART support diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt index 5c52e5eef16db630d2c64ade872e26b89b7a540d..8b2b0460259a76b95401cfe7565e1a13621ac470 100644 --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt @@ -11,6 +11,11 @@ Required properties: - clocks: Clock driving the hardware; used to figure out the baud rate divisor. + +Optional properties: + +- clock-names: Should be "refclk". + Example: uart0: serial@14e00520 { @@ -19,6 +24,7 @@ Example: interrupt-parent = <&periph_intc>; interrupts = <2>; clocks = <&periph_clk>; + clock-names = "refclk"; }; clocks { diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 574c3a2c77d5cd28570e1272488703f0852ec2eb..860a9559839a40dffc7ceb273424abe55df9926b 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,6 +9,7 @@ Optional properties: - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt Please check Documentation/devicetree/bindings/serial/serial.txt for the complete list of generic properties. diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index a1252a047f78d75e14fa41d4dabdbca96b35781d..59567b51cf098bfa963fee4283b63e01d226bb31 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -16,6 +16,7 @@ Required properties: Optional properties: - dmas: A list of two dma specifiers, one for each entry in dma-names. - dma-names: should contain "tx" and "rx". +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt Note: Optional properties for DMA support. Write them both or both not. diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 6087defd9f9321b60890212b38f45f45b6ae517e..d37fabe17bd1215df697757e6622aac5f798061e 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -8,6 +8,6 @@ Required properties: Example: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; + reg = <0x12000 0x200>; interrupts = <43>; }; diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt index 7a71b5de77d69b12f58a4d0d26b559fe7fa078fc..43eac675f21f5fd58cda23535facab5b82903957 100644 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ b/Documentation/devicetree/bindings/serial/omap_serial.txt @@ -19,6 +19,7 @@ Optional properties: - dmas : DMA specifier, consisting of a phandle to the DMA controller node and a DMA channel number. - dma-names : "rx" for receive channel, "tx" for transmit channel. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt Example: diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt index 3657f9f9d17a98302e873c7c75bbd0ee312e13b0..d150b04a62291f788c0d6658f80382726038a5cf 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -2,14 +2,10 @@ Required properties: - compatible: can be either: - - "st,stm32-usart", - "st,stm32-uart", - - "st,stm32f7-usart", - "st,stm32f7-uart", - - "st,stm32h7-usart" - "st,stm32h7-uart". - depending on whether the device supports synchronous mode - and is compatible with stm32(f4), stm32f7 or stm32h7. + depending is compatible with stm32(f4), stm32f7 or stm32h7. - reg: The address and length of the peripheral registers space - interrupts: - The interrupt line for the USART instance, @@ -33,7 +29,7 @@ usart4: serial@40004c00 { }; usart2: serial@40004400 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; clocks = <&clk_pclk1>; @@ -43,7 +39,7 @@ usart2: serial@40004400 { }; usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&rcc 0 164>; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt index 47ac834414d8488e29c20bf3b91f369b994b8746..48eed140765b0b902b19ed485c23b3e16838f905 100644 --- a/Documentation/devicetree/bindings/soc/fsl/bman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt @@ -65,8 +65,8 @@ to the respective BMan instance BMan Private Memory Node BMan requires a contiguous range of physical memory used for the backing store -for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a -node under the /reserved-memory node +for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as +a node under the /reserved-memory node. The BMan FBPR memory node must be named "bman-fbpr" @@ -75,7 +75,9 @@ PROPERTIES - compatible Usage: required Value type: - Definition: Must inclide "fsl,bman-fbpr" + Definition: PPC platforms: Must include "fsl,bman-fbpr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FBPR private memory: - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to @@ -100,10 +102,10 @@ The example below shows a BMan FBPR dynamic allocation memory node ranges; bman_fbpr: bman-fbpr { - compatible = "fsl,bman-fbpr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-mem-pool"; size = <0 0x1000000>; alignment = <0 0x1000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt index 60984260207b19545e661f2f1f57f8000c6cfbdf..09b1b05fa6779c60e8df5dfd07c42297da7ff4c7 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt @@ -18,7 +18,7 @@ par_io@1400 { #size-cells = <0>; device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { + ucc_pin@1 { ...... }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt index ec6ee2e864a29d593dbfcc93bbf0988aba643119..5bde8b98a8c9f7c43adc156bfdf5c774451ba554 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt @@ -26,7 +26,7 @@ Required properties: interrupts. Example: - ucc_pin@01 { + ucc_pin@1 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 3 1 0 1 0 /* TxD0 */ diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt index 556ebb8be75d9cfa5b16aca5ac56316ee1f00d29..ee96afd2af72163c1e28cc7ff135cc110beadb18 100644 --- a/Documentation/devicetree/bindings/soc/fsl/qman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt @@ -60,6 +60,12 @@ are located at offsets 0xbf8 and 0xbfc Value type: Definition: Reference input clock. Its frequency is half of the platform clock +- memory-regions + Usage: Required for ARM + Value type: + Definition: List of phandles referencing the QMan private memory + nodes (described below). The qman-fqd node must be + first followed by qman-pfdr node. Only used on ARM Devices connected to a QMan instance via Direct Connect Portals (DCP) must link to the respective QMan instance @@ -74,7 +80,9 @@ QMan Private Memory Nodes QMan requires two contiguous range of physical memory used for the backing store for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). -This memory is reserved/allocated as a nodes under the /reserved-memory node +This memory is reserved/allocated as a node under the /reserved-memory node. + +For additional details about reserved memory regions see reserved-memory.txt The QMan FQD memory node must be named "qman-fqd" @@ -83,7 +91,9 @@ PROPERTIES - compatible Usage: required Value type: - Definition: Must inclide "fsl,qman-fqd" + Definition: PPC platforms: Must include "fsl,qman-fqd" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The QMan PFDR memory node must be named "qman-pfdr" @@ -92,7 +102,9 @@ PROPERTIES - compatible Usage: required Value type: - Definition: Must inclide "fsl,qman-pfdr" + Definition: PPC platforms: Must include "fsl,qman-pfdr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FQD and PFDR private memory: - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to @@ -117,16 +129,16 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes ranges; qman_fqd: qman-fqd { - compatible = "fsl,qman-fqd"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x400000>; alignment = <0 0x400000>; + no-map; }; qman_pfdr: qman-pfdr { - compatible = "fsl,qman-pfdr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x2000000>; alignment = <0 0x2000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 107700d00df4d2ac7331b6c9fc59baafa2805670..bf80e3f96f8c6b12b011357fd2e2dba49d34d8c3 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -19,6 +19,7 @@ IP Pairing Required properties in pwrap device node. - compatible: "mediatek,mt2701-pwrap" for MT2701/7623 SoCs + "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs - interrupts: IRQ for pwrap in SOC @@ -36,9 +37,12 @@ Required properties in pwrap device node. - clocks: Must contain an entry for each entry in clock-names. Optional properities: -- pmic: Mediatek PMIC MFD is the child device of pwrap +- pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt + or the regulator-only device as the child device of pwrap, such as MT6380. + See the following definitions for such kinds of devices. + Documentation/devicetree/bindings/regulator/mt6380-regulator.txt Example: pwrap: pwrap@1000f000 { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index b277eca861f72a45c7fa0bbd2d6d35656d730d39..9663cab5224626cd74a6ca0a724c1be09e0bd38c 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function Definition: a list of channels tied to this function, used for matching the function to a set of virtual channels +- qcom,intents: + Usage: optional + Value type: + Definition: a list of size,amount pairs describing what intents should + be preallocated for this virtual channel. This can be used + to tweak the default intents available for the channel to + meet expectations of the remote. + = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for @@ -69,6 +77,8 @@ regualtors and root clocks. compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + qcom,intents = <0x400 5 + 0x800 1>; ... }; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt index 4ea39e9186a75acd972101553c9cb699f43b68ba..042a2e4159bd64db798a2efaa878ee3e7fd6efa5 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt @@ -37,6 +37,11 @@ The following properties are defined to the bluetooth node: Definition: must be: "qcom,wcnss-bt" +- local-bd-address: + Usage: optional + Value type: + Definition: see Documentation/devicetree/bindings/net/bluetooth.txt + == WiFi The following properties are defined to the WiFi node: @@ -91,6 +96,9 @@ smd { bt { compatible = "qcom,wcnss-bt"; + + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; }; wlan { diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt index 66e6265fb0aa2f2af147c63a776c86bb9a52096f..f7b00a7c0f68944b7b29a9f515f342bd96d3da63 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt @@ -51,7 +51,7 @@ of valid identifiers for k2g. Example (K2G): -------------------- - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ns16550a"; ... power-domains = <&k2g_pds 0x002c>; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 6e6720aa33f19b03c81db761413db684267acc73..d04ea3b1a1dd5d7710da9c25b76372a8aadb6347 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -17,6 +17,7 @@ Below are same as Simple-Card. - bitclock-master - bitclock-inversion - frame-inversion +- mclk-fs - dai-tdm-slot-num - dai-tdm-slot-width - clocks / system-clock-frequency diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index 8b8afe9fcb315891b0e321152bbf56eefd5c6e30..441dd6f29df13ba987316c5b6a4102c7bf73e636 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -43,7 +43,7 @@ Example 1. Sampling Rate Conversion label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port>; @@ -79,7 +79,8 @@ Example 2. 2 CPU 1 Codec (Mixing) label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port0 diff --git a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt index befd125d18bbab54ea07dd818e1df5723f1b8fc2..860fc0da39c02003d6f6149f3c2a96990cfa4414 100644 --- a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt +++ b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt @@ -9,7 +9,7 @@ Required properties: Examples: - i2s0: xtfpga-i2s@0d080000 { + i2s0: xtfpga-i2s@d080000 { #sound-dai-cells = <0>; compatible = "cdns,xtfpga-i2s"; reg = <0x0d080000 0x40>; diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt index 4feb0eb27ea4b66de5f8b9bc95173a87847107b6..4ba520a28ae8fcafb286819fb0123c9228df4f68 100644 --- a/Documentation/devicetree/bindings/sound/cs42l56.txt +++ b/Documentation/devicetree/bindings/sound/cs42l56.txt @@ -55,7 +55,7 @@ Example: codec: codec@4b { compatible = "cirrus,cs42l56"; reg = <0x4b>; - gpio-reset = <&gpio 10 0>; + cirrus,gpio-nreset = <&gpio 10 0>; cirrus,chgfreq-divisor = <0x05>; cirrus.ain1_ref_cfg; cirrus,micbias-lvl = <5>; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 65979b205893c791de5332fb84a23543720ee0b5..f5a14115b459482ea7ffa2ce43c9b84096cdb3df 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -41,7 +41,7 @@ Required properties: Example: -asrc: asrc@02034000 { +asrc: asrc@2034000 { compatible = "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 21c401e2ccda6e66bc2ef110b64d701a519b5d40..cacd18bb9ba63978a73d569a00db21d6389b9b21 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -48,7 +48,7 @@ Required properties: Example: -esai: esai@02024000 { +esai: esai@2024000 { compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 0f97e54c3d436965eaff1e31e92db569170cb02f..38cfa75734415e018107c6a0a2cc128497cc059f 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -39,7 +39,7 @@ Required properties: Example: -spdif: spdif@02004000 { +spdif: spdif@2004000 { compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt index b30a737e209e3d9a2e06af3a432e01c81e4dfb9e..2db4dcbee1b928fabffc9c03531d9fd846be423c 100644 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt @@ -22,7 +22,7 @@ Required properties of optional child nodes: Example: -audmux@021d8000 { +audmux@21d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index 929ca6756b02314ca44c9e8786ab32637a3d2294..4f33b0d96afeb106bb457ed071ab3f4779d80ec5 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -1,22 +1,27 @@ RT5514 audio CODEC -This device supports I2C only. +This device supports both I2C and SPI. Required properties: - compatible : "realtek,rt5514". -- reg : The I2C address of the device. +- reg : the I2C address of the device for I2C, the chip select + number for SPI. Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- interrupt-parent: The phandle for the interrupt controller. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready. + Set the DMIC initial delay (ms) to wait it ready for I2C. -Pins on the device (for linking into audio routes) for RT5514: +Pins on the device (for linking into audio routes) for I2C: * DMIC1L * DMIC1R diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index ff381718c51755b5d3cb06ac7c0e3ae1a1c85f48..497bcfc58b712173b05ce876600f1595a3d20125 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -19,6 +19,22 @@ Optional properties: Based on the different PCB layout, add the manual offset value to compensate the DC offset for each L and R channel, and they are different between headphone and headset. +- "realtek,impedance_sensing_num" + The matrix row number of the impedance sensing table. + If the value is 0, it means the impedance sensing is not supported. +- "realtek,impedance_sensing_table" + The matrix rows of the impedance sensing table are consisted by impedance + minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + R channel accordingly. Example is shown as following. + < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 + 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> + The first and second column are defined for the impedance range. If the + detected impedance value is in the range, then the volume value of the + third column will be set to codec. In our codec design, each volume value + should compensate different DC offset to avoid the pop sound, and it is + also different between headphone and headset. In the example, the + "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of + impedance in the impedance sensing function. Pins on the device (for linking into audio routes) for RT5663: diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 09e0e18591ae26edd867ccd1fd263559f32400c1..bf100cd0d0f7a83034dc40d42dcf3d934810c353 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -63,7 +63,7 @@ Optional SoC Specific Properties: Example: -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 7a73a9d62015ecc600af3c3f1c69f001b180b410..060cb4a3b47e0c942268b43be8016464ec344b1e 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -37,7 +37,7 @@ VDDIO 1.8V 2.5V 3.3V Example: -codec: sgtl5000@0a { +codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f1c5ae59e7c99f8f6117428f4c3de33aa5eb9a16..1f9cd7095337881b5ee97ef51e9143efcbc0574e 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -10,13 +10,21 @@ Required properties: - reg: Base address and size of SAI common register set. - clocks: Must contain phandle and clock specifier pairs for each entry in clock-names. - - clock-names: Must contain "x8k" and "x11k" + - clock-names: Must contain "pclk" "x8k" and "x11k" + "pclk": Clock which feeds the peripheral bus interface. + Mandatory for "st,stm32h7-sai" compatible. + Not used for "st,stm32f4-sai" compatible. "x8k": SAI parent clock for sampling rates multiple of 8kHz. "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - interrupts: cpu DAI interrupt line shared by SAI sub-blocks Optional properties: - resets: Reference to a reset controller asserting the SAI + - st,sync: specify synchronization mode. + By default SAI sub-block is in asynchronous mode. + This property sets SAI sub-block as slave of another SAI sub-block. + Must contain the phandle and index of the sai sub-block providing + the synchronization. SAI subnodes: Two subnodes corresponding to SAI sub-block instances A et B can be defined. @@ -52,8 +60,8 @@ sai1: sai1@40015800 { #size-cells = <1>; ranges = <0 0x40015800 0x400>; reg = <0x40015800 0x4>; - clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "x8k", "x11k"; + clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "x8k", "x11k"; interrupts = <87>; sai1a: audio-controller@40015804 { diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt index 2d4e10deb6f4d128a6fa383bd7238f2fc12173ed..66579bbd329455ddc5b18a89ecd17bd2dd805856 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -62,7 +62,7 @@ Required properties for the following compatibles: block in the PRCM. Example: -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun7i-a20-codec"; reg = <0x01c22c00 0x40>; @@ -73,7 +73,7 @@ codec: codec@01c22c00 { dma-names = "rx", "tx"; }; -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-codec"; reg = <0x01c22c00 0x98>; diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index fc5da6080759d26e0d65fc0c576f128c0bc70dfc..05d7135a8d2ffa7bb3732dd013f0b47c4dcfa9a8 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -28,7 +28,7 @@ Required properties for the following compatibles: Example: -i2s0: i2s@01c22400 { +i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt index 399b1b4bae2239857a9bb69adcb6fbdec35b6667..2ca3d138528ec340526704e3cb7c865c3f486b70 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt @@ -48,7 +48,7 @@ are similar to A33 using simple-card: sound-dai = <&codec>; }; - soc@01c00000 { + soc@1c00000 { [...] audio-codec@1c22e00 { diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt index 1b6e7c4e50ab89b2e6ad9430bf47ba008a695ec2..07356758bd91448e0ba54f0a8b9b654812fcf5fc 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt @@ -10,7 +10,7 @@ Required properties if not a sub-node of the PRCM node: - reg: must contain the registers location and length Example: -prcm: prcm@01f01400 { +prcm: prcm@1f01400 { codec_analog: codec-analog { compatible = "allwinner,sun8i-a23-codec-analog"; }; diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 70ee177901d3044ee1c4434f41c892d5db60ff9b..0c64a209c2e9f7b0e8d00815ac2dd1a414c3c689 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -31,7 +31,7 @@ Required properties: Example: -spdif: spdif@01c21000 { +spdif: spdif@1c21000 { compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x40>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/sound/tfa9879.txt b/Documentation/devicetree/bindings/sound/tfa9879.txt new file mode 100644 index 0000000000000000000000000000000000000000..23ba522d9e2b2cf930a61237fb6e4ac27b103658 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tfa9879.txt @@ -0,0 +1,23 @@ +NXP TFA9879 class-D audio amplifier + +Required properties: + +- compatible : "nxp,tfa9879" + +- reg : the I2C address of the device + +Example: + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: tfa9879@6c { + #sound-dai-cells = <0>; + compatible = "nxp,tfa9879"; + reg = <0x6c>; + }; +}; + diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt new file mode 100644 index 0000000000000000000000000000000000000000..e172c62dc2dffd58d64b9810af849ce2f6e863b7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt @@ -0,0 +1,53 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists sound specific bindings, see the primary binding +document: + ../mfd/arizona.txt + +Optional properties: + + - wlf,inmode : A list of INn_MODE register values, where n is the number + of input signals. Valid values are 0 (Differential), 1 (Single-ended) and + 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. + If present, values must be specified less than or equal to the number of + input signals. If values less than the number of input signals, elements + that have not been specified are set to 0 by default. Entries are: + (wm5102, wm5110, wm8280, wm8997) + (wm8998, wm1814) + - wlf,out-mono : A list of boolean values indicating whether each output is + mono or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero value + indicates a mono output. If present, the number of values should be less + than or equal to the number of outputs, if less values are supplied the + additional outputs will be treated as stereo. + + - wlf,dmic-ref : DMIC reference voltage source for each input, can be + selected from either MICVDD or one of the MICBIAS's, defines + (ARIZONA_DMIC_xxxx) are provided in . If + present, the number of values should be less than or equal to the + number of inputs, unspecified inputs will use the chip default. + + - wlf,max-channels-clocked : The maximum number of channels to be clocked on + each AIF, useful for I2S systems with multiple data lines being mastered. + Specify one cell for each AIF to be configured, specify zero for AIFs that + should be handled normally. + If present, number of cells must be less than or equal to the number of + AIFs. If less than the number of AIFs, for cells that have not been + specified the corresponding AIFs will be treated as default setting. + + - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,out-volume-limit : The volume limit value that should be applied to each + output channel. See the datasheet for exact values. Channels are specified + in the order OUT1L, OUT1R, OUT2L, OUT2R, etc. diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt index b5a5ca4502f9d4251414a978a1119e496929d99a..09231d7586b2e184dab34353a06d3458499bb69e 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -16,7 +16,7 @@ please check: * dma/dma.txt Example: - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 13b1fcc8469e699412282d92c59c59328916dff8..dcc7eaada5118a5e61c23499d5f46f5f324e5c43 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -5,6 +5,7 @@ Required properties: "fsl,ls2085a-dspi" or "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" + "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt index 484bbff5337e17a9d5976b3984734619e0f75296..c75d604a82900fe3a05f54e4f52c4f28dafc4cbf 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt @@ -12,7 +12,7 @@ Required properties: Example: -spi1: spi@01c06000 { +spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index ab1811354cce2ef8b1436d40cf7362423e9b2c7f..435a8e0731ac02ce8c9572eb118012a499b11280 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -19,7 +19,7 @@ Optional properties: Example: -spi1: spi@01c69000 { +spi1: spi@1c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = <0 66 4>; @@ -28,7 +28,7 @@ spi1: spi@01c69000 { resets = <&ahb1_rst 21>; }; -spi0: spi@01c68000 { +spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; interrupts = ; diff --git a/Documentation/devicetree/bindings/sram/samsung-sram.txt b/Documentation/devicetree/bindings/sram/samsung-sram.txt index 6bc474b2b885a624ca0b08d1fc7dc83fc60deebf..61a9bbed303d7000eafa3d51219c39592f94c869 100644 --- a/Documentation/devicetree/bindings/sram/samsung-sram.txt +++ b/Documentation/devicetree/bindings/sram/samsung-sram.txt @@ -19,7 +19,7 @@ found in Documentation/devicetree/bindings/sram/sram.txt Example: - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 6bb92a1df753e5ae7b74f17b435a511210acbe19..d087f04a4d7f649dfdfab372d89b4cd7867c839a 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -47,7 +47,7 @@ This valid values for this argument are: Example ------- -sram-controller@01c00000 { +sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; @@ -68,7 +68,7 @@ sram-controller@01c00000 { }; }; -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; ... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt new file mode 100644 index 0000000000000000000000000000000000000000..9d43553a8d397b63cb39152133df9b51d1b74471 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt @@ -0,0 +1,20 @@ +* Broadcom STB thermal management + +Thermal management core, provided by the AVS TMON hardware block. + +Required properties: +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445" +- reg: address range for the AVS TMON registers +- interrupts: temperature monitor interrupt, for high/low threshold triggers +- interrupt-names: should be "tmon" +- interrupt-parent: the parent interrupt controller + +Example: + + thermal@f04d1500 { + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; + reg = <0xf04d1500 0x28>; + interrupts = <0x6>; + interrupt-names = "tmon"; + interrupt-parent = <&avs_host_l2_intc>; + }; diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt index d48fc5280d5a80ba17f9d906f01554d390edf9be..cef716a236f1a94179d5c61bde45c79df0890e8f 100644 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -13,6 +13,7 @@ Example : +for Hi6220: tsensor: tsensor@0,f7030700 { compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; @@ -21,3 +22,11 @@ Example : clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; } + +for Hi3660: + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = ; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 3c67bd50aa104ee152ea22132c377dcd2e6d3673..28be51afdb6a2623a9eb9465a86e0ec3fa7a1d7a 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -7,10 +7,17 @@ Required properties: is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON control registers, e.g. ANATOP on imx6q. +- nvmem-cells: A phandle to the calibration cells provided by ocotp. +- nvmem-cell-names: Should be "calib", "temp_grade". + +Deprecated properties: - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips +because it does not handle OCOTP clock requirements. + Optional properties: - clocks : thermal sensor's clock source. diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt new file mode 100644 index 0000000000000000000000000000000000000000..276387dd6815e334ae7d6a9e7d05f1509efd8f5f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra186 BPMP thermal sensor + +In Tegra186, the BPMP (Boot and Power Management Processor) implements an +interface that is used to read system temperatures, including CPU cluster +and GPU temperatures. This binding describes the thermal sensor that is +exposed by BPMP. + +The BPMP thermal node must be located directly inside the main BPMP node. See +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. + +This node represents a thermal sensor. See thermal.txt for details of the +core thermal binding. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-thermal". +- #thermal-sensor-cells: Cell for sensor index. + Single-cell integer. + Must be <1>. + +Example: + +bpmp { + ... + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index e3a6234fb1acdbf3efdbf61c233c5151a98adc4f..43d744e5305ef3fd4f1577ec69fd8db41dc2be56 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -2,6 +2,7 @@ Required properties: - compatible : should be "rockchip,-tsadc" + "rockchip,rv1108-tsadc": found on RV1108 SoCs "rockchip,rk3228-tsadc": found on RK3228 SoCs "rockchip,rk3288-tsadc": found on RK3288 SoCs "rockchip,rk3328-tsadc": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt index 8d6e4fd2468e4a60bb3306612d08a6ea315f3ecd..2c5c1be7836015c9cfc6ef4e653eb5d846d48dad 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -14,7 +14,7 @@ Optional properties: Example: -timer@01c60000 { +timer@1c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <0 51 1>, diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index 8bcac6ee73daa54254aa32d96d9aeacdc93a966d..678039d4d5e57f96eacd9c9b5a0e8ce72a1d4dd4 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -36,11 +36,9 @@ atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor capella,cm3232 CM3232: Ambient Light Sensor cirrus,cs42l51 Cirrus Logic CS42L51 audio codec -dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock -dallas,ds1338 I2C RTC with 56-Byte NV RAM -dallas,ds1340 I2C RTC with Trickle Charger dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output dallas,ds1631 High-Precision Digital Thermometer +dallas,ds1672 Dallas DS1672 Real-time Clock dallas,ds1682 Total-Elapsed-Time Recorder with Alarm dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM @@ -54,10 +52,9 @@ dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer domintech,dmard10 DMARD10: 3-axis Accelerometer epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +emmicro,em3027 EM Microelectronic EM3027 Real-time Clock fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer -fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor @@ -67,6 +64,8 @@ gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire In infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM +isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM +isil,isl12022 Intersil ISL12022 Real-time Clock isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator @@ -156,6 +155,7 @@ nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pcf2127 Real-time clock nxp,pcf2129 Real-time clock +nxp,pcf8523 Real-time Clock nxp,pcf8563 Real-time clock/calendar nxp,pcf85063 Tiny Real-Time Clock oki,ml86v7667 OKI ML86V7667 video decoder @@ -175,10 +175,6 @@ sii,s35390a 2-wire CMOS real-time clock silabs,si7020 Relative Humidity and Temperature Sensors skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st,24c256 i2c serial eeprom (24cxx) -st,m41t0 Serial real-time clock (RTC) -st,m41t00 Serial real-time clock (RTC) -st,m41t62 Serial real-time clock (RTC) with alarm -st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,ads7828 8-Channels, 12-bit ADC ti,ads7830 8-Channels, 8-bit ADC diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index cb2bd83fa89aa9db0a9a8fac774fe8f8656f2efb..50abb20fe319435cbc824cb17ba23bf2394e3d87 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -16,7 +16,7 @@ Required properties: Example: - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; clocks = <&ahb_gates 0>; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 16920d78e1b8b9d350189434a46d19037aca19e5..7a33f22c815a76ca534bf16f5d158e6d9ae07033 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -181,7 +181,7 @@ usb: usb@47400000 { "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@7402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index ad8ea56a9ed37aa1c14a0a80b6c533c9ae9efcbd..44e80153b148f178c61608b5dd8276b1f24e30ac 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -18,7 +18,7 @@ Required properties: - atmel,oc-gpio: If present, specifies a gpio that needs to be activated for the overcurrent detection. -usb0: ohci@00500000 { +usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; @@ -39,7 +39,7 @@ Required properties: "ehci_clk" for the peripheral clock "usb_clk" for the UTMI clock -usb1: ehci@00800000 { +usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 4>; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index fcf199b64d3d3f2b703c42001d7cf7dfff5ca7bf..e64d903bcbe8177574cc1cf82c0bfeb37168206c 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -19,6 +19,8 @@ Required properties: configured in FS mode; - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode; + - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs + configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt - clocks: clock provider specifier diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt new file mode 100644 index 0000000000000000000000000000000000000000..8cdbe0c85188a644f995a567777fb4a25ec6c1f0 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt @@ -0,0 +1,26 @@ +Maxim Integrated SPI-based USB 2.0 host controller MAX3421E + +Required properties: + - compatible: Should be "maxim,max3421" + - spi-max-frequency: maximum frequency for this device must not exceed 26 MHz. + - reg: chip select number to which this device is connected. + - maxim,vbus-en-pin: + GPOUTx is the number (1-8) of the GPOUT pin of MAX3421E to drive Vbus. + ACTIVE_LEVEL is 0 or 1. + - interrupts: the interrupt line description for the interrupt controller. + The driver configures MAX3421E for active low level triggered interrupts, + configure your interrupt line accordingly. + +Optional property: + - interrupt-parent: the phandle to the associated interrupt controller. + +Example: + + usb@0 { + compatible = "maxim,max3421"; + reg = <0>; + maxim,vbus-en-pin = <3 1>; + spi-max-frequency = <26000000>; + interrupt-parent = <&PIC>; + interrupts = <42>; + }; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index 5611a2e4ddf0c9c334cd81d06b011a7715593312..30595964876a941a2cf6b0c08a06dacc18fdee2d 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -26,10 +26,11 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - clock-names : must contain - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC - "wakeup_deb_p0": for USB wakeup debounce clock of port0 - "wakeup_deb_p1": for USB wakeup debounce clock of port1 + "sys_ck": controller clock used by normal mode, + the following ones are optional: + "ref_ck": reference clock used by low power mode etc, + "mcu_ck": mcu_bus clock for register access, + "dma_ck": dma_bus clock for data transfer by DMA - phys : a list of phandle + phy specifier pairs @@ -38,6 +39,8 @@ Optional properties: mode; - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup control register, it depends on "mediatek,wakeup-src". + - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc; - vbus-supply : reference to the VBUS regulator; - usb3-lpm-capable : supports USB3.0 LPM - pinctrl-names : a pinctrl state named "default" must be defined @@ -55,9 +58,7 @@ usb30: usb@11270000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; + clock-names = "sys_ck", "ref_ck"; phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>; vusb33-supply = <&mt6397_vusb_reg>; @@ -89,9 +90,8 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must be - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC + - clock-names : must contain "sys_ck", and the following ones are optional: + "ref_ck", "mcu_ck" and "dma_ck" Optional properties: - vbus-supply : reference to the VBUS regulator; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 49f54767cd214e8d6d4ada2dcd1e133aa6ede4cc..b2271d8e6b50f9eb15a8b10967ce5206ec3874fc 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -14,9 +14,9 @@ Required properties: - vusb33-supply : regulator of USB avdd3.3v - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller; - "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are - depends on "mediatek,enable-wakeup" + - clock-names : must contain "sys_ck" for clock of controller, + the following clocks are optional: + "ref_ck", "mcu_ck" and "dam_ck"; - phys : a list of phandle + phy specifier pairs - dr_mode : should be one of "host", "peripheral" or "otg", refer to usb/generic.txt @@ -30,9 +30,10 @@ Optional properties: when supports dual-role mode. - vbus-supply : reference to the VBUS regulator, needed when supports dual-role mode. - - pinctl-names : a pinctrl state named "default" must be defined, - "id_float" and "id_ground" are optinal which depends on - "mediatek,enable-manual-drd" + - pinctrl-names : a pinctrl state named "default" is optional, and need be + defined if auto drd switch is enabled, that means the property dr_mode + is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" + is not set. - pinctrl-0 : pin control group See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -44,6 +45,8 @@ Optional properties: - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup control register, it depends on "mediatek,enable-wakeup". + - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc; Sub-nodes: The xhci should be added as subnode to mtu3 as shown in the following example @@ -63,9 +66,7 @@ ssusb: usb@11271000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; + clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; vbus-supply = <&usb_p0_vbus>; extcon = <&extcon_usb>; diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt index 2dc8f67eda3940f0031e1b00d5d1d2e0bcc5141c..24a826d5015ec5823f4c64b10cfbf0c06cb080a7 100644 --- a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ohci: usb@0225000 { +ohci: usb@225000 { compatible = "ti,da830-ohci"; reg = <0x225000 0x1000>; interrupts = <59>; diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt index e28025883b79fce3e814a12630f1022956dcaf79..87a45e2f9b7f99c1a26028e79dd38581bebec43e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -15,6 +15,10 @@ Required properties: - interrupts: Interrupt specifier for the USB3.0 Peripheral - clocks: clock phandle and specifier pair +Optional properties: + - phys: phandle + phy specifier pair + - phy-names: must be "usb" + Example of R-Car H3 ES1.x: usb3_peri0: usb@ee020000 { compatible = "renesas,r8a7795-usb3-peri", diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 9e18e000339ebb856a839e27245a91f3c25c9c77..47394ab788e385fbed8842d8c63a7a5af468b762 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -3,6 +3,8 @@ Renesas Electronics USBHS driver Required properties: - compatible: Must contain one or more of the following: + - "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device + - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device @@ -10,7 +12,8 @@ Required properties: - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device - - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device + - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device + - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index ce02cebac26afdc80d99600725b3aaec24cb01e9..1b27cebb47f4286f8fac429f1361e6cba240d469 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -4,24 +4,35 @@ Usually, we only use device tree for hard wired USB device. The reference binding doc is from: http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps + Required properties: -- compatible: usbVID,PID. The textual representation of VID, PID shall - be in lower case hexadecimal with leading zeroes suppressed. The - other compatible strings from the above standard binding could also - be used, but a device adhering to this binding may leave out all except - for usbVID,PID. -- reg: the port number which this device is connecting to, the range - is 1-31. +- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case hexadecimal + with leading zeroes suppressed. The other compatible strings from the above + standard binding could also be used, but a device adhering to this binding + may leave out all except for "usbVID,PID". +- reg: the number of the USB hub port or the USB host-controller port to which + this device is attached. The range is 1-255. + + +Required properties for hub nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 -Example: -&usb1 { +Required properties for host-controller nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + + +Example: +&usb1 { /* host controller */ #address-cells = <1>; #size-cells = <0>; - hub: genesys@1 { + hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; }; -} +}; diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index a12d6012a40fd6acbdbe733a68935dd6196d52c2..3efde12b5d6806c1303ef3729502cdfd40dc6917 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -30,7 +30,7 @@ Example (Sequoia 440EPx): }; Example (Allwinner sun4i A10 SoC): - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt index 5be01c859b7a98fd77fbf049e04dd3f7a233f28c..4dc6a8ee307156ea1f09083900e49536e0a94b6a 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt @@ -2,6 +2,7 @@ USB NOP PHY Required properties: - compatible: should be usb-nop-xceiv +- #phy-cells: Must be 0 Optional properties: - clocks: phandle to the PHY clock. Use as per Documentation/devicetree @@ -33,6 +34,7 @@ Example: reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; vbus-regulator = <&vbus_regulator>; + #phy-cells = <0>; }; hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index e8766b08c93b9538366a4ef813b8479ad8700587..09e70c875bc67f543e46fb50a848c11e2a0bb22f 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 2d80b60eeabefe54f4f548fd15cb4da6fb7ab912..ae6e484a8d7c5804bb63ab8f347f9b65c34dc92a 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -26,6 +26,7 @@ Required properties: Optional properties: - clocks: reference to a clock + - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 3957d4edaa745fc068c4ab8ba796f9c8d8190a1f..168ff819e8273fc5435552949c67467d69f14e1d 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -1,16 +1,17 @@ Microchip USB 2.0 Hi-Speed Hub Controller -The device node for the configuration of a Microchip USB251xB/xBi USB 2.0 +The device node for the configuration of a Microchip USB251x/xBi USB 2.0 Hi-Speed Controller. Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", - "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" - - reset-gpios : Should specify the gpio for hub reset + "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi", + "microchip,usb2517", "microchip,usb2517i" - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : + - reset-gpios : Should specify the gpio for hub reset - skip-config : Skip Hub configuration, but only send the USB-Attach command - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) - product-id : Set USB Product ID of the hub (16 bit, default depends on type) @@ -19,29 +20,47 @@ Optional properties : - manufacturer : Set USB Manufacturer string (max 31 characters long) - product : Set USB Product string (max 31 characters long) - serial : Set USB Serial string (max 31 characters long) - - {bus,self}-powered : selects between self- and bus-powered operation (default - is self-powered) - - disable-hi-speed : disable USB Hi-Speed support + - {bus,self}-powered : selects between self- and bus-powered operation + (boolean, default is self-powered) + - disable-hi-speed : disable USB Hi-Speed support (boolean) - {multi,single}-tt : selects between multi- and single-transaction-translator - (default is multi-tt) - - disable-eop : disable End of Packet generation in full-speed mode + (boolean, default is multi-tt) + - disable-eop : disable End of Packet generation in full-speed mode (boolean) - {ganged,individual}-sensing : select over-current sense type in self-powered - mode (default is individual) + mode (boolean, default is individual) - {ganged,individual}-port-switching : select port power switching mode - (default is individual) + (boolean, default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered - operation if the local power source is removed or unavailable + operation if the local power source is removed or unavailable (boolean) - oc-delay-us : Delay time (in microseconds) for filtering the over-current sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If an invalid value is given, the default is used instead. - - compound-device : indicate the hub is part of a compound device - - port-mapping-mode : enable port mapping mode + - compound-device : indicate the hub is part of a compound device (boolean) + - port-mapping-mode : enable port mapping mode (boolean) + - led-{usb,speed}-mode : led usb/speed indication mode selection + (boolean, default is speed mode) - string-support : enable string descriptor support (required for manufacturer, product and serial string configuration) - non-removable-ports : Should specify the ports which have a non-removable device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled + - sp-max-total-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry including a permanently + attached peripheral (range: 0 - 100000 uA, default 1000 uA) + - bp-max-total-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry including a permanently + attached peripheral (range: 0 - 510000 uA, default 100000 uA) + - sp-max-removable-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry excluding a permanently + attached peripheral (range: 0 - 100000 uA, default 1000 uA) + - bp-max-removable-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry excluding a permanently + attached peripheral (range: 0 - 510000 uA, default 100000 uA) - power-on-time-ms : Specifies the time it takes from the time the host initiates the power-on sequence to a port until the port has adequate power. The value is given in ms in a 0 - 510 range (default is 100ms). @@ -56,7 +75,6 @@ Examples: usb2514b@2c { compatible = "microchip,usb2514b"; reg = <0x2c>; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; vendor-id = /bits/ 16 <0x0000>; product-id = /bits/ 16 <0x0000>; string-support; diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index c1a0a9191d26180bd0d96be32f8bbdc5ad3eafa9..057dd384d4732c76c3412c8a7fbc40b16fbee82a 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -26,7 +26,7 @@ Optional properties: clock frequencies table is used) Examples: - usb3503@08 { + usb3503@8 { compatible = "smsc,usb3503"; reg = <0x08>; connect-gpios = <&gpx3 0 1>; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index f1e27faf528e7e5abdec2a79cac85cf794c7e768..a85a631ec434c6f1a6cf47c7e68d608e24734319 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -10,7 +10,7 @@ Required properties: - reg: Should contain registers location and length Examples: -usbmisc@02184800 { +usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index b1eeca851d6f55adde03c945561b56085289ee37..0994bdd82cd37ce0abf9882745fd174764524ac5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -18,6 +18,7 @@ al Annapurna Labs allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. +amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. @@ -83,6 +84,7 @@ davicom DAVICOM Semiconductor, Inc. delta Delta Electronics, Inc. denx Denx Software Engineering devantech Devantech, Ltd. +dh DH electronics GmbH digi Digi International Inc. digilent Diglent, Inc. dioo Dioo Microcircuit Co., Ltd @@ -113,6 +115,7 @@ everspin Everspin Technologies, Inc. exar Exar Corporation excito Excito ezchip EZchip Semiconductor +fairphone Fairphone B.V. faraday Faraday Technology Corporation fcs Fairchild Semiconductor firefly Firefly @@ -137,6 +140,7 @@ gw Gateworks Corporation hannstar HannStar Display Corporation haoyu Haoyu Microelectronic Co. Ltd. hardkernel Hardkernel Co., Ltd +hideep HiDeep Inc. himax Himax Technologies, Inc. hisilicon Hisilicon Limited. hit Hitachi Ltd. @@ -197,6 +201,7 @@ mcube mCube meas Measurement Specialties mediatek MediaTek Inc. megachips MegaChips +mele Shenzhen MeLE Digital Technology Ltd. melexis Melexis N.V. melfas MELFAS Inc. mellanox Mellanox Technologies @@ -229,12 +234,14 @@ netlogic Broadcom Corporation (formerly NetLogic Microsystems) netron-dy Netron DY netxeon Shenzhen Netxeon Technology CO., LTD nexbox Nexbox +nextthing Next Thing Co. newhaven Newhaven Display International ni National Instruments nintendo Nintendo nlt NLT Technologies, Ltd. nokia Nokia nordic Nordic Semiconductor +nutsboard NutsBoard nuvoton Nuvoton Technology Corporation nvd New Vision Display nvidia NVIDIA @@ -245,10 +252,12 @@ olimex OLIMEX Ltd. onion Onion Corporation onnn ON Semiconductor Corp. ontat On Tat Industrial Company +opalkelly Opal Kelly Incorporated opencores OpenCores.org openrisc OpenRISC.io option Option NV ORCL Oracle Corporation +orisetech Orise Technology ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies oxsemi Oxford Semiconductor, Ltd. @@ -264,6 +273,7 @@ plathome Plat'Home Co., Ltd. plda PLDA poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) +probox2 PROBOX2 (by W2COMP Co., Ltd.) pulsedlight PulsedLight, Inc qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc @@ -297,6 +307,7 @@ sensirion Sensirion AG sff Small Form Factor Committee sgx SGX Sensortech sharp Sharp Corporation +shimafuji Shimafuji Electric, Inc. si-en Si-En Technology Ltd. sigma Sigma Designs, Inc. sii Seiko Instruments, Inc. @@ -318,6 +329,7 @@ solomon Solomon Systech Limited sony Sony Corporation spansion Spansion Inc. sprd Spreadtrum Communications Inc. +sst Silicon Storage Technology, Inc. st STMicroelectronics starry Starry Electronic Technology (ShenZhen) Co., LTD startek Startek @@ -330,6 +342,7 @@ swir Sierra Wireless syna Synaptics Inc. synology Synology, Inc. tbs TBS Technologies +tbs-biometrics Touchless Biometric Systems AG tcg Trusted Computing Group tcl Toby Churchill Ltd. technexion TechNexion @@ -339,6 +352,7 @@ thine THine Electronics, Inc. ti Texas Instruments tianma Tianma Micro-electronics Co., Ltd. tlm Trusted Logic Mobility +tmt Tecon Microprocessor Technologies, LLC. topeet Topeet toradex Toradex AG toshiba Toshiba Corporation @@ -352,6 +366,7 @@ truly Truly Semiconductors Limited tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics +ubnt Ubiquiti Networks udoo Udoo uniwest United Western Technologies Corp (UniWest) upisemi uPI Semiconductor Corp. diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 235de0683bb6f7e3ae557175d57d40cdfa17218d..5b38a30e608c21bcec18479dcb7b236590549fda 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -13,7 +13,7 @@ Required properties: Example: -wdt: watchdog@010000000 { +wdt: watchdog@10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x18>; }; diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index b8f75c51453a6463573835187a0c49d9a9fb8d11..62dd5baad70e665b82b58fe6ef78af993bba9b80 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -8,7 +8,7 @@ Required properties: Example: -wdt: watchdog@01c20c90 { +wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index eb7f2685fda1f0a080f0aa11bdb2a587307f8046..c4aa0adf13ece1f65677603fd5ed6739f0d5bba4 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -87,15 +87,15 @@ Overlay in-kernel API The API is quite easy to use. -1. Call of_overlay_create() to create and apply an overlay. The return value -is a cookie identifying this overlay. +1. Call of_overlay_apply() to create and apply an overlay changeset. The return +value is an error or a cookie identifying this overlay. -2. Call of_overlay_destroy() to remove and cleanup the overlay previously -created via the call to of_overlay_create(). Removal of an overlay that -is stacked by another will not be permitted. +2. Call of_overlay_remove() to remove and cleanup the overlay changeset +previously created via the call to of_overlay_apply(). Removal of an overlay +changeset that is stacked by another will not be permitted. Finally, if you need to remove all overlays in one-go, just call -of_overlay_destroy_all() which will remove every single one in the correct +of_overlay_remove_all() which will remove every single one in the correct order. Overlay DTS Format diff --git a/Documentation/driver-api/80211/cfg80211.rst b/Documentation/driver-api/80211/cfg80211.rst index 8ffac57e1f5b7ddd0b56547258f604d06816e9bd..eeab91b59457e74f16681eb196356213b9e06173 100644 --- a/Documentation/driver-api/80211/cfg80211.rst +++ b/Documentation/driver-api/80211/cfg80211.rst @@ -299,9 +299,6 @@ Data path helpers .. kernel-doc:: include/net/cfg80211.h :functions: ieee80211_data_to_8023 -.. kernel-doc:: include/net/cfg80211.h - :functions: ieee80211_data_from_8023 - .. kernel-doc:: include/net/cfg80211.h :functions: ieee80211_amsdu_to_8023s diff --git a/Documentation/driver-api/pinctl.rst b/Documentation/driver-api/pinctl.rst index 48f15b4f9d3e441da3dbd582e8dbd36fa2687bce..6cb68d67fa75a7cef5eab57125fccac3a86a0139 100644 --- a/Documentation/driver-api/pinctl.rst +++ b/Documentation/driver-api/pinctl.rst @@ -757,8 +757,8 @@ that your datasheet calls "GPIO mode", but actually is just an electrical configuration for a certain device. See the section below named "GPIO mode pitfalls" for more details on this scenario. -The public pinmux API contains two functions named pinctrl_request_gpio() -and pinctrl_free_gpio(). These two functions shall *ONLY* be called from +The public pinmux API contains two functions named pinctrl_gpio_request() +and pinctrl_gpio_free(). These two functions shall *ONLY* be called from gpiolib-based drivers as part of their gpio_request() and gpio_free() semantics. Likewise the pinctrl_gpio_direction_[input|output] shall only be called from within respective gpio_direction_[input|output] @@ -790,7 +790,7 @@ gpiolib driver and the affected GPIO range, pin offset and desired direction will be passed along to this function. Alternatively to using these special functions, it is fully allowed to use -named functions for each GPIO pin, the pinctrl_request_gpio() will attempt to +named functions for each GPIO pin, the pinctrl_gpio_request() will attempt to obtain the function "gpioN" where "N" is the global GPIO pin number if no special GPIO-handler is registered. diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst index a0dc2879a152c89dbb9d5f715ec07fbfe6a4cd8e..53c1b0b06da5faae4670b33dd37e365e145b4210 100644 --- a/Documentation/driver-api/pm/devices.rst +++ b/Documentation/driver-api/pm/devices.rst @@ -274,7 +274,7 @@ sleep states and the hibernation state ("suspend-to-disk"). Each phase involves executing callbacks for every device before the next phase begins. Not all buses or classes support all these callbacks and not all drivers use all the callbacks. The various phases always run after tasks have been frozen and -before they are unfrozen. Furthermore, the ``*_noirq phases`` run at a time +before they are unfrozen. Furthermore, the ``*_noirq`` phases run at a time when IRQ handlers have been disabled (except for those marked with the IRQF_NO_SUSPEND flag). @@ -328,7 +328,10 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``. After the ``->prepare`` callback method returns, no new children may be registered below the device. The method may also prepare the device or driver in some way for the upcoming system power transition, but it - should not put the device into a low-power state. + should not put the device into a low-power state. Moreover, if the + device supports runtime power management, the ``->prepare`` callback + method must not update its state in case it is necessary to resume it + from runtime suspend later on. For devices supporting runtime power management, the return value of the prepare callback can be used to indicate to the PM core that it may @@ -351,11 +354,35 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``. is because all such devices are initially set to runtime-suspended with runtime PM disabled. + This feature also can be controlled by device drivers by using the + ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power + management flags. [Typically, they are set at the time the driver is + probed against the device in question by passing them to the + :c:func:`dev_pm_set_driver_flags` helper function.] If the first of + these flags is set, the PM core will not apply the direct-complete + procedure described above to the given device and, consequenty, to any + of its ancestors. The second flag, when set, informs the middle layer + code (bus types, device types, PM domains, classes) that it should take + the return value of the ``->prepare`` callback provided by the driver + into account and it may only return a positive value from its own + ``->prepare`` callback if the driver's one also has returned a positive + value. + 2. The ``->suspend`` methods should quiesce the device to stop it from performing I/O. They also may save the device registers and put it into the appropriate low-power state, depending on the bus type the device is on, and they may enable wakeup events. + However, for devices supporting runtime power management, the + ``->suspend`` methods provided by subsystems (bus types and PM domains + in particular) must follow an additional rule regarding what can be done + to the devices before their drivers' ``->suspend`` methods are called. + Namely, they can only resume the devices from runtime suspend by + calling :c:func:`pm_runtime_resume` for them, if that is necessary, and + they must not update the state of the devices in any other way at that + time (in case the drivers need to resume the devices from runtime + suspend in their ``->suspend`` methods). + 3. For a number of devices it is convenient to split suspend into the "quiesce device" and "save device state" phases, in which cases ``suspend_late`` is meant to do the latter. It is always executed after @@ -729,6 +756,36 @@ state temporarily, for example so that its system wakeup capability can be disabled. This all depends on the hardware and the design of the subsystem and device driver in question. +If it is necessary to resume a device from runtime suspend during a system-wide +transition into a sleep state, that can be done by calling +:c:func:`pm_runtime_resume` for it from the ``->suspend`` callback (or its +couterpart for transitions related to hibernation) of either the device's driver +or a subsystem responsible for it (for example, a bus type or a PM domain). +That is guaranteed to work by the requirement that subsystems must not change +the state of devices (possibly except for resuming them from runtime suspend) +from their ``->prepare`` and ``->suspend`` callbacks (or equivalent) *before* +invoking device drivers' ``->suspend`` callbacks (or equivalent). + +Some bus types and PM domains have a policy to resume all devices from runtime +suspend upfront in their ``->suspend`` callbacks, but that may not be really +necessary if the driver of the device can cope with runtime-suspended devices. +The driver can indicate that by setting ``DPM_FLAG_SMART_SUSPEND`` in +:c:member:`power.driver_flags` at the probe time, by passing it to the +:c:func:`dev_pm_set_driver_flags` helper. That also may cause middle-layer code +(bus types, PM domains etc.) to skip the ``->suspend_late`` and +``->suspend_noirq`` callbacks provided by the driver if the device remains in +runtime suspend at the beginning of the ``suspend_late`` phase of system-wide +suspend (or in the ``poweroff_late`` phase of hibernation), when runtime PM +has been disabled for it, under the assumption that its state should not change +after that point until the system-wide transition is over. If that happens, the +driver's system-wide resume callbacks, if present, may still be invoked during +the subsequent system-wide resume transition and the device's runtime power +management status may be set to "active" before enabling runtime PM for it, +so the driver must be prepared to cope with the invocation of its system-wide +resume callbacks back-to-back with its ``->runtime_suspend`` one (without the +intervening ``->runtime_resume`` and so on) and the final state of the device +must reflect the "active" status for runtime PM in that case. + During system-wide resume from a sleep state it's easiest to put devices into the full-power state, as explained in :file:`Documentation/power/runtime_pm.txt`. Refer to that document for more information regarding this particular issue as diff --git a/Documentation/driver-api/scsi.rst b/Documentation/driver-api/scsi.rst index 5a2aa7a377d9bd9fe08e5519cfa285d5fa5083f5..9ae03171daca1bcd0bdb8e512ab5e5d15e00d58d 100644 --- a/Documentation/driver-api/scsi.rst +++ b/Documentation/driver-api/scsi.rst @@ -28,7 +28,7 @@ SCSI commands can be transported over just about any kind of bus, and are the default protocol for storage devices attached to USB, SATA, SAS, Fibre Channel, FireWire, and ATAPI devices. SCSI packets are also commonly exchanged over Infiniband, -`I20 `__, TCP/IP +`I2O `__, TCP/IP (`iSCSI `__), even `Parallel ports `__. diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 69f08c0f23a8eb8706a35f43d338061cdaa61868..c180045eb43b190beccc1072a7285f6f5de5bf34 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -237,6 +237,7 @@ CLOCK devm_clk_get() devm_clk_put() devm_clk_hw_register() + devm_of_clk_add_hw_provider() DMA dmam_alloc_coherent() diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt index 060da408923b26bea0017d86ada9369ae8cd91f4..ba99b5ac4fd80284adfbc2f6404a7d3da3fbb665 100644 --- a/Documentation/filesystems/afs.txt +++ b/Documentation/filesystems/afs.txt @@ -91,8 +91,8 @@ Filesystems can be mounted anywhere by commands similar to the following: mount -t afs "#root.cell." /afs/cambridge Where the initial character is either a hash or a percent symbol depending on -whether you definitely want a R/W volume (hash) or whether you'd prefer a R/O -volume, but are willing to use a R/W volume instead (percent). +whether you definitely want a R/W volume (percent) or whether you'd prefer a +R/O volume, but are willing to use a R/W volume instead (hash). The name of the volume can be suffixes with ".backup" or ".readonly" to specify connection to only volumes of those types. diff --git a/Documentation/filesystems/cramfs.txt b/Documentation/filesystems/cramfs.txt index 4006298f670700b1da158616df1718dde422ef48..8e19a53d648b666cb678caf33a13a17a0278c1df 100644 --- a/Documentation/filesystems/cramfs.txt +++ b/Documentation/filesystems/cramfs.txt @@ -45,6 +45,48 @@ you can just change the #define in mkcramfs.c, so long as you don't mind the filesystem becoming unreadable to future kernels. +Memory Mapped cramfs image +-------------------------- + +The CRAMFS_MTD Kconfig option adds support for loading data directly from +a physical linear memory range (usually non volatile memory like Flash) +instead of going through the block device layer. This saves some memory +since no intermediate buffering is necessary to hold the data before +decompressing. + +And when data blocks are kept uncompressed and properly aligned, they will +automatically be mapped directly into user space whenever possible providing +eXecute-In-Place (XIP) from ROM of read-only segments. Data segments mapped +read-write (hence they have to be copied to RAM) may still be compressed in +the cramfs image in the same file along with non compressed read-only +segments. Both MMU and no-MMU systems are supported. This is particularly +handy for tiny embedded systems with very tight memory constraints. + +The location of the cramfs image in memory is system dependent. You must +know the proper physical address where the cramfs image is located and +configure an MTD device for it. Also, that MTD device must be supported +by a map driver that implements the "point" method. Examples of such +MTD drivers are cfi_cmdset_0001 (Intel/Sharp CFI flash) or physmap +(Flash device in physical memory map). MTD partitions based on such devices +are fine too. Then that device should be specified with the "mtd:" prefix +as the mount device argument. For example, to mount the MTD device named +"fs_partition" on the /mnt directory: + +$ mount -t cramfs mtd:fs_partition /mnt + +To boot a kernel with this as root filesystem, suffice to specify +something like "root=mtd:fs_partition" on the kernel command line. + + +Tools +----- + +A version of mkcramfs that can take advantage of the latest capabilities +described above can be found here: + +https://github.com/npitre/cramfs-tools + + For /usr/share/magic -------------------- diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst new file mode 100644 index 0000000000000000000000000000000000000000..776ddc655f7980224d3af3e256e090dedd5240d3 --- /dev/null +++ b/Documentation/filesystems/fscrypt.rst @@ -0,0 +1,610 @@ +===================================== +Filesystem-level encryption (fscrypt) +===================================== + +Introduction +============ + +fscrypt is a library which filesystems can hook into to support +transparent encryption of files and directories. + +Note: "fscrypt" in this document refers to the kernel-level portion, +implemented in ``fs/crypto/``, as opposed to the userspace tool +`fscrypt `_. This document only +covers the kernel-level portion. For command-line examples of how to +use encryption, see the documentation for the userspace tool `fscrypt +`_. Also, it is recommended to use +the fscrypt userspace tool, or other existing userspace tools such as +`fscryptctl `_ or `Android's key +management system +`_, over +using the kernel's API directly. Using existing tools reduces the +chance of introducing your own security bugs. (Nevertheless, for +completeness this documentation covers the kernel's API anyway.) + +Unlike dm-crypt, fscrypt operates at the filesystem level rather than +at the block device level. This allows it to encrypt different files +with different keys and to have unencrypted files on the same +filesystem. This is useful for multi-user systems where each user's +data-at-rest needs to be cryptographically isolated from the others. +However, except for filenames, fscrypt does not encrypt filesystem +metadata. + +Unlike eCryptfs, which is a stacked filesystem, fscrypt is integrated +directly into supported filesystems --- currently ext4, F2FS, and +UBIFS. This allows encrypted files to be read and written without +caching both the decrypted and encrypted pages in the pagecache, +thereby nearly halving the memory used and bringing it in line with +unencrypted files. Similarly, half as many dentries and inodes are +needed. eCryptfs also limits encrypted filenames to 143 bytes, +causing application compatibility issues; fscrypt allows the full 255 +bytes (NAME_MAX). Finally, unlike eCryptfs, the fscrypt API can be +used by unprivileged users, with no need to mount anything. + +fscrypt does not support encrypting files in-place. Instead, it +supports marking an empty directory as encrypted. Then, after +userspace provides the key, all regular files, directories, and +symbolic links created in that directory tree are transparently +encrypted. + +Threat model +============ + +Offline attacks +--------------- + +Provided that userspace chooses a strong encryption key, fscrypt +protects the confidentiality of file contents and filenames in the +event of a single point-in-time permanent offline compromise of the +block device content. fscrypt does not protect the confidentiality of +non-filename metadata, e.g. file sizes, file permissions, file +timestamps, and extended attributes. Also, the existence and location +of holes (unallocated blocks which logically contain all zeroes) in +files is not protected. + +fscrypt is not guaranteed to protect confidentiality or authenticity +if an attacker is able to manipulate the filesystem offline prior to +an authorized user later accessing the filesystem. + +Online attacks +-------------- + +fscrypt (and storage encryption in general) can only provide limited +protection, if any at all, against online attacks. In detail: + +fscrypt is only resistant to side-channel attacks, such as timing or +electromagnetic attacks, to the extent that the underlying Linux +Cryptographic API algorithms are. If a vulnerable algorithm is used, +such as a table-based implementation of AES, it may be possible for an +attacker to mount a side channel attack against the online system. +Side channel attacks may also be mounted against applications +consuming decrypted data. + +After an encryption key has been provided, fscrypt is not designed to +hide the plaintext file contents or filenames from other users on the +same system, regardless of the visibility of the keyring key. +Instead, existing access control mechanisms such as file mode bits, +POSIX ACLs, LSMs, or mount namespaces should be used for this purpose. +Also note that as long as the encryption keys are *anywhere* in +memory, an online attacker can necessarily compromise them by mounting +a physical attack or by exploiting any kernel security vulnerability +which provides an arbitrary memory read primitive. + +While it is ostensibly possible to "evict" keys from the system, +recently accessed encrypted files will remain accessible at least +until the filesystem is unmounted or the VFS caches are dropped, e.g. +using ``echo 2 > /proc/sys/vm/drop_caches``. Even after that, if the +RAM is compromised before being powered off, it will likely still be +possible to recover portions of the plaintext file contents, if not +some of the encryption keys as well. (Since Linux v4.12, all +in-kernel keys related to fscrypt are sanitized before being freed. +However, userspace would need to do its part as well.) + +Currently, fscrypt does not prevent a user from maliciously providing +an incorrect key for another user's existing encrypted files. A +protection against this is planned. + +Key hierarchy +============= + +Master Keys +----------- + +Each encrypted directory tree is protected by a *master key*. Master +keys can be up to 64 bytes long, and must be at least as long as the +greater of the key length needed by the contents and filenames +encryption modes being used. For example, if AES-256-XTS is used for +contents encryption, the master key must be 64 bytes (512 bits). Note +that the XTS mode is defined to require a key twice as long as that +required by the underlying block cipher. + +To "unlock" an encrypted directory tree, userspace must provide the +appropriate master key. There can be any number of master keys, each +of which protects any number of directory trees on any number of +filesystems. + +Userspace should generate master keys either using a cryptographically +secure random number generator, or by using a KDF (Key Derivation +Function). Note that whenever a KDF is used to "stretch" a +lower-entropy secret such as a passphrase, it is critical that a KDF +designed for this purpose be used, such as scrypt, PBKDF2, or Argon2. + +Per-file keys +------------- + +Master keys are not used to encrypt file contents or names directly. +Instead, a unique key is derived for each encrypted file, including +each regular file, directory, and symbolic link. This has several +advantages: + +- In cryptosystems, the same key material should never be used for + different purposes. Using the master key as both an XTS key for + contents encryption and as a CTS-CBC key for filenames encryption + would violate this rule. +- Per-file keys simplify the choice of IVs (Initialization Vectors) + for contents encryption. Without per-file keys, to ensure IV + uniqueness both the inode and logical block number would need to be + encoded in the IVs. This would make it impossible to renumber + inodes, which e.g. ``resize2fs`` can do when resizing an ext4 + filesystem. With per-file keys, it is sufficient to encode just the + logical block number in the IVs. +- Per-file keys strengthen the encryption of filenames, where IVs are + reused out of necessity. With a unique key per directory, IV reuse + is limited to within a single directory. +- Per-file keys allow individual files to be securely erased simply by + securely erasing their keys. (Not yet implemented.) + +A KDF (Key Derivation Function) is used to derive per-file keys from +the master key. This is done instead of wrapping a randomly-generated +key for each file because it reduces the size of the encryption xattr, +which for some filesystems makes the xattr more likely to fit in-line +in the filesystem's inode table. With a KDF, only a 16-byte nonce is +required --- long enough to make key reuse extremely unlikely. A +wrapped key, on the other hand, would need to be up to 64 bytes --- +the length of an AES-256-XTS key. Furthermore, currently there is no +requirement to support unlocking a file with multiple alternative +master keys or to support rotating master keys. Instead, the master +keys may be wrapped in userspace, e.g. as done by the `fscrypt +`_ tool. + +The current KDF encrypts the master key using the 16-byte nonce as an +AES-128-ECB key. The output is used as the derived key. If the +output is longer than needed, then it is truncated to the needed +length. Truncation is the norm for directories and symlinks, since +those use the CTS-CBC encryption mode which requires a key half as +long as that required by the XTS encryption mode. + +Note: this KDF meets the primary security requirement, which is to +produce unique derived keys that preserve the entropy of the master +key, assuming that the master key is already a good pseudorandom key. +However, it is nonstandard and has some problems such as being +reversible, so it is generally considered to be a mistake! It may be +replaced with HKDF or another more standard KDF in the future. + +Encryption modes and usage +========================== + +fscrypt allows one encryption mode to be specified for file contents +and one encryption mode to be specified for filenames. Different +directory trees are permitted to use different encryption modes. +Currently, the following pairs of encryption modes are supported: + +- AES-256-XTS for contents and AES-256-CTS-CBC for filenames +- AES-128-CBC for contents and AES-128-CTS-CBC for filenames + +It is strongly recommended to use AES-256-XTS for contents encryption. +AES-128-CBC was added only for low-powered embedded devices with +crypto accelerators such as CAAM or CESA that do not support XTS. + +New encryption modes can be added relatively easily, without changes +to individual filesystems. However, authenticated encryption (AE) +modes are not currently supported because of the difficulty of dealing +with ciphertext expansion. + +For file contents, each filesystem block is encrypted independently. +Currently, only the case where the filesystem block size is equal to +the system's page size (usually 4096 bytes) is supported. With the +XTS mode of operation (recommended), the logical block number within +the file is used as the IV. With the CBC mode of operation (not +recommended), ESSIV is used; specifically, the IV for CBC is the +logical block number encrypted with AES-256, where the AES-256 key is +the SHA-256 hash of the inode's data encryption key. + +For filenames, the full filename is encrypted at once. Because of the +requirements to retain support for efficient directory lookups and +filenames of up to 255 bytes, a constant initialization vector (IV) is +used. However, each encrypted directory uses a unique key, which +limits IV reuse to within a single directory. Note that IV reuse in +the context of CTS-CBC encryption means that when the original +filenames share a common prefix at least as long as the cipher block +size (16 bytes for AES), the corresponding encrypted filenames will +also share a common prefix. This is undesirable; it may be fixed in +the future by switching to an encryption mode that is a strong +pseudorandom permutation on arbitrary-length messages, e.g. the HEH +(Hash-Encrypt-Hash) mode. + +Since filenames are encrypted with the CTS-CBC mode of operation, the +plaintext and ciphertext filenames need not be multiples of the AES +block size, i.e. 16 bytes. However, the minimum size that can be +encrypted is 16 bytes, so shorter filenames are NUL-padded to 16 bytes +before being encrypted. In addition, to reduce leakage of filename +lengths via their ciphertexts, all filenames are NUL-padded to the +next 4, 8, 16, or 32-byte boundary (configurable). 32 is recommended +since this provides the best confidentiality, at the cost of making +directory entries consume slightly more space. Note that since NUL +(``\0``) is not otherwise a valid character in filenames, the padding +will never produce duplicate plaintexts. + +Symbolic link targets are considered a type of filename and are +encrypted in the same way as filenames in directory entries. Each +symlink also uses a unique key; hence, the hardcoded IV is not a +problem for symlinks. + +User API +======== + +Setting an encryption policy +---------------------------- + +The FS_IOC_SET_ENCRYPTION_POLICY ioctl sets an encryption policy on an +empty directory or verifies that a directory or regular file already +has the specified encryption policy. It takes in a pointer to a +:c:type:`struct fscrypt_policy`, defined as follows:: + + #define FS_KEY_DESCRIPTOR_SIZE 8 + + struct fscrypt_policy { + __u8 version; + __u8 contents_encryption_mode; + __u8 filenames_encryption_mode; + __u8 flags; + __u8 master_key_descriptor[FS_KEY_DESCRIPTOR_SIZE]; + }; + +This structure must be initialized as follows: + +- ``version`` must be 0. + +- ``contents_encryption_mode`` and ``filenames_encryption_mode`` must + be set to constants from ```` which identify the + encryption modes to use. If unsure, use + FS_ENCRYPTION_MODE_AES_256_XTS (1) for ``contents_encryption_mode`` + and FS_ENCRYPTION_MODE_AES_256_CTS (4) for + ``filenames_encryption_mode``. + +- ``flags`` must be set to a value from ```` which + identifies the amount of NUL-padding to use when encrypting + filenames. If unsure, use FS_POLICY_FLAGS_PAD_32 (0x3). + +- ``master_key_descriptor`` specifies how to find the master key in + the keyring; see `Adding keys`_. It is up to userspace to choose a + unique ``master_key_descriptor`` for each master key. The e4crypt + and fscrypt tools use the first 8 bytes of + ``SHA-512(SHA-512(master_key))``, but this particular scheme is not + required. Also, the master key need not be in the keyring yet when + FS_IOC_SET_ENCRYPTION_POLICY is executed. However, it must be added + before any files can be created in the encrypted directory. + +If the file is not yet encrypted, then FS_IOC_SET_ENCRYPTION_POLICY +verifies that the file is an empty directory. If so, the specified +encryption policy is assigned to the directory, turning it into an +encrypted directory. After that, and after providing the +corresponding master key as described in `Adding keys`_, all regular +files, directories (recursively), and symlinks created in the +directory will be encrypted, inheriting the same encryption policy. +The filenames in the directory's entries will be encrypted as well. + +Alternatively, if the file is already encrypted, then +FS_IOC_SET_ENCRYPTION_POLICY validates that the specified encryption +policy exactly matches the actual one. If they match, then the ioctl +returns 0. Otherwise, it fails with EEXIST. This works on both +regular files and directories, including nonempty directories. + +Note that the ext4 filesystem does not allow the root directory to be +encrypted, even if it is empty. Users who want to encrypt an entire +filesystem with one key should consider using dm-crypt instead. + +FS_IOC_SET_ENCRYPTION_POLICY can fail with the following errors: + +- ``EACCES``: the file is not owned by the process's uid, nor does the + process have the CAP_FOWNER capability in a namespace with the file + owner's uid mapped +- ``EEXIST``: the file is already encrypted with an encryption policy + different from the one specified +- ``EINVAL``: an invalid encryption policy was specified (invalid + version, mode(s), or flags) +- ``ENOTDIR``: the file is unencrypted and is a regular file, not a + directory +- ``ENOTEMPTY``: the file is unencrypted and is a nonempty directory +- ``ENOTTY``: this type of filesystem does not implement encryption +- ``EOPNOTSUPP``: the kernel was not configured with encryption + support for this filesystem, or the filesystem superblock has not + had encryption enabled on it. (For example, to use encryption on an + ext4 filesystem, CONFIG_EXT4_ENCRYPTION must be enabled in the + kernel config, and the superblock must have had the "encrypt" + feature flag enabled using ``tune2fs -O encrypt`` or ``mkfs.ext4 -O + encrypt``.) +- ``EPERM``: this directory may not be encrypted, e.g. because it is + the root directory of an ext4 filesystem +- ``EROFS``: the filesystem is readonly + +Getting an encryption policy +---------------------------- + +The FS_IOC_GET_ENCRYPTION_POLICY ioctl retrieves the :c:type:`struct +fscrypt_policy`, if any, for a directory or regular file. See above +for the struct definition. No additional permissions are required +beyond the ability to open the file. + +FS_IOC_GET_ENCRYPTION_POLICY can fail with the following errors: + +- ``EINVAL``: the file is encrypted, but it uses an unrecognized + encryption context format +- ``ENODATA``: the file is not encrypted +- ``ENOTTY``: this type of filesystem does not implement encryption +- ``EOPNOTSUPP``: the kernel was not configured with encryption + support for this filesystem + +Note: if you only need to know whether a file is encrypted or not, on +most filesystems it is also possible to use the FS_IOC_GETFLAGS ioctl +and check for FS_ENCRYPT_FL, or to use the statx() system call and +check for STATX_ATTR_ENCRYPTED in stx_attributes. + +Getting the per-filesystem salt +------------------------------- + +Some filesystems, such as ext4 and F2FS, also support the deprecated +ioctl FS_IOC_GET_ENCRYPTION_PWSALT. This ioctl retrieves a randomly +generated 16-byte value stored in the filesystem superblock. This +value is intended to used as a salt when deriving an encryption key +from a passphrase or other low-entropy user credential. + +FS_IOC_GET_ENCRYPTION_PWSALT is deprecated. Instead, prefer to +generate and manage any needed salt(s) in userspace. + +Adding keys +----------- + +To provide a master key, userspace must add it to an appropriate +keyring using the add_key() system call (see: +``Documentation/security/keys/core.rst``). The key type must be +"logon"; keys of this type are kept in kernel memory and cannot be +read back by userspace. The key description must be "fscrypt:" +followed by the 16-character lower case hex representation of the +``master_key_descriptor`` that was set in the encryption policy. The +key payload must conform to the following structure:: + + #define FS_MAX_KEY_SIZE 64 + + struct fscrypt_key { + u32 mode; + u8 raw[FS_MAX_KEY_SIZE]; + u32 size; + }; + +``mode`` is ignored; just set it to 0. The actual key is provided in +``raw`` with ``size`` indicating its size in bytes. That is, the +bytes ``raw[0..size-1]`` (inclusive) are the actual key. + +The key description prefix "fscrypt:" may alternatively be replaced +with a filesystem-specific prefix such as "ext4:". However, the +filesystem-specific prefixes are deprecated and should not be used in +new programs. + +There are several different types of keyrings in which encryption keys +may be placed, such as a session keyring, a user session keyring, or a +user keyring. Each key must be placed in a keyring that is "attached" +to all processes that might need to access files encrypted with it, in +the sense that request_key() will find the key. Generally, if only +processes belonging to a specific user need to access a given +encrypted directory and no session keyring has been installed, then +that directory's key should be placed in that user's user session +keyring or user keyring. Otherwise, a session keyring should be +installed if needed, and the key should be linked into that session +keyring, or in a keyring linked into that session keyring. + +Note: introducing the complex visibility semantics of keyrings here +was arguably a mistake --- especially given that by design, after any +process successfully opens an encrypted file (thereby setting up the +per-file key), possessing the keyring key is not actually required for +any process to read/write the file until its in-memory inode is +evicted. In the future there probably should be a way to provide keys +directly to the filesystem instead, which would make the intended +semantics clearer. + +Access semantics +================ + +With the key +------------ + +With the encryption key, encrypted regular files, directories, and +symlinks behave very similarly to their unencrypted counterparts --- +after all, the encryption is intended to be transparent. However, +astute users may notice some differences in behavior: + +- Unencrypted files, or files encrypted with a different encryption + policy (i.e. different key, modes, or flags), cannot be renamed or + linked into an encrypted directory; see `Encryption policy + enforcement`_. Attempts to do so will fail with EPERM. However, + encrypted files can be renamed within an encrypted directory, or + into an unencrypted directory. + +- Direct I/O is not supported on encrypted files. Attempts to use + direct I/O on such files will fall back to buffered I/O. + +- The fallocate operations FALLOC_FL_COLLAPSE_RANGE, + FALLOC_FL_INSERT_RANGE, and FALLOC_FL_ZERO_RANGE are not supported + on encrypted files and will fail with EOPNOTSUPP. + +- Online defragmentation of encrypted files is not supported. The + EXT4_IOC_MOVE_EXT and F2FS_IOC_MOVE_RANGE ioctls will fail with + EOPNOTSUPP. + +- The ext4 filesystem does not support data journaling with encrypted + regular files. It will fall back to ordered data mode instead. + +- DAX (Direct Access) is not supported on encrypted files. + +- The st_size of an encrypted symlink will not necessarily give the + length of the symlink target as required by POSIX. It will actually + give the length of the ciphertext, which may be slightly longer than + the plaintext due to the NUL-padding. + +Note that mmap *is* supported. This is possible because the pagecache +for an encrypted file contains the plaintext, not the ciphertext. + +Without the key +--------------- + +Some filesystem operations may be performed on encrypted regular +files, directories, and symlinks even before their encryption key has +been provided: + +- File metadata may be read, e.g. using stat(). + +- Directories may be listed, in which case the filenames will be + listed in an encoded form derived from their ciphertext. The + current encoding algorithm is described in `Filename hashing and + encoding`_. The algorithm is subject to change, but it is + guaranteed that the presented filenames will be no longer than + NAME_MAX bytes, will not contain the ``/`` or ``\0`` characters, and + will uniquely identify directory entries. + + The ``.`` and ``..`` directory entries are special. They are always + present and are not encrypted or encoded. + +- Files may be deleted. That is, nondirectory files may be deleted + with unlink() as usual, and empty directories may be deleted with + rmdir() as usual. Therefore, ``rm`` and ``rm -r`` will work as + expected. + +- Symlink targets may be read and followed, but they will be presented + in encrypted form, similar to filenames in directories. Hence, they + are unlikely to point to anywhere useful. + +Without the key, regular files cannot be opened or truncated. +Attempts to do so will fail with ENOKEY. This implies that any +regular file operations that require a file descriptor, such as +read(), write(), mmap(), fallocate(), and ioctl(), are also forbidden. + +Also without the key, files of any type (including directories) cannot +be created or linked into an encrypted directory, nor can a name in an +encrypted directory be the source or target of a rename, nor can an +O_TMPFILE temporary file be created in an encrypted directory. All +such operations will fail with ENOKEY. + +It is not currently possible to backup and restore encrypted files +without the encryption key. This would require special APIs which +have not yet been implemented. + +Encryption policy enforcement +============================= + +After an encryption policy has been set on a directory, all regular +files, directories, and symbolic links created in that directory +(recursively) will inherit that encryption policy. Special files --- +that is, named pipes, device nodes, and UNIX domain sockets --- will +not be encrypted. + +Except for those special files, it is forbidden to have unencrypted +files, or files encrypted with a different encryption policy, in an +encrypted directory tree. Attempts to link or rename such a file into +an encrypted directory will fail with EPERM. This is also enforced +during ->lookup() to provide limited protection against offline +attacks that try to disable or downgrade encryption in known locations +where applications may later write sensitive data. It is recommended +that systems implementing a form of "verified boot" take advantage of +this by validating all top-level encryption policies prior to access. + +Implementation details +====================== + +Encryption context +------------------ + +An encryption policy is represented on-disk by a :c:type:`struct +fscrypt_context`. It is up to individual filesystems to decide where +to store it, but normally it would be stored in a hidden extended +attribute. It should *not* be exposed by the xattr-related system +calls such as getxattr() and setxattr() because of the special +semantics of the encryption xattr. (In particular, there would be +much confusion if an encryption policy were to be added to or removed +from anything other than an empty directory.) The struct is defined +as follows:: + + #define FS_KEY_DESCRIPTOR_SIZE 8 + #define FS_KEY_DERIVATION_NONCE_SIZE 16 + + struct fscrypt_context { + u8 format; + u8 contents_encryption_mode; + u8 filenames_encryption_mode; + u8 flags; + u8 master_key_descriptor[FS_KEY_DESCRIPTOR_SIZE]; + u8 nonce[FS_KEY_DERIVATION_NONCE_SIZE]; + }; + +Note that :c:type:`struct fscrypt_context` contains the same +information as :c:type:`struct fscrypt_policy` (see `Setting an +encryption policy`_), except that :c:type:`struct fscrypt_context` +also contains a nonce. The nonce is randomly generated by the kernel +and is used to derive the inode's encryption key as described in +`Per-file keys`_. + +Data path changes +----------------- + +For the read path (->readpage()) of regular files, filesystems can +read the ciphertext into the page cache and decrypt it in-place. The +page lock must be held until decryption has finished, to prevent the +page from becoming visible to userspace prematurely. + +For the write path (->writepage()) of regular files, filesystems +cannot encrypt data in-place in the page cache, since the cached +plaintext must be preserved. Instead, filesystems must encrypt into a +temporary buffer or "bounce page", then write out the temporary +buffer. Some filesystems, such as UBIFS, already use temporary +buffers regardless of encryption. Other filesystems, such as ext4 and +F2FS, have to allocate bounce pages specially for encryption. + +Filename hashing and encoding +----------------------------- + +Modern filesystems accelerate directory lookups by using indexed +directories. An indexed directory is organized as a tree keyed by +filename hashes. When a ->lookup() is requested, the filesystem +normally hashes the filename being looked up so that it can quickly +find the corresponding directory entry, if any. + +With encryption, lookups must be supported and efficient both with and +without the encryption key. Clearly, it would not work to hash the +plaintext filenames, since the plaintext filenames are unavailable +without the key. (Hashing the plaintext filenames would also make it +impossible for the filesystem's fsck tool to optimize encrypted +directories.) Instead, filesystems hash the ciphertext filenames, +i.e. the bytes actually stored on-disk in the directory entries. When +asked to do a ->lookup() with the key, the filesystem just encrypts +the user-supplied name to get the ciphertext. + +Lookups without the key are more complicated. The raw ciphertext may +contain the ``\0`` and ``/`` characters, which are illegal in +filenames. Therefore, readdir() must base64-encode the ciphertext for +presentation. For most filenames, this works fine; on ->lookup(), the +filesystem just base64-decodes the user-supplied name to get back to +the raw ciphertext. + +However, for very long filenames, base64 encoding would cause the +filename length to exceed NAME_MAX. To prevent this, readdir() +actually presents long filenames in an abbreviated form which encodes +a strong "hash" of the ciphertext filename, along with the optional +filesystem-specific hash(es) needed for directory lookups. This +allows the filesystem to still, with a high degree of confidence, map +the filename given in ->lookup() back to a particular directory entry +that was previously listed by readdir(). See :c:type:`struct +fscrypt_digested_name` in the source for more details. + +Note that the precise way that filenames are presented to userspace +without the key is subject to change in the future. It is only meant +as a way to temporarily present valid filenames so that commands like +``rm -r`` work as expected on encrypted directories. diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index 256e10eedba4e43c058fa5136e3304e2e5bc0a87..53b89d0edc15d9230b5dca489d6e19fdf0ca0e0e 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -315,3 +315,14 @@ exported for use by modules. :internal: .. kernel-doc:: fs/pipe.c + +Encryption API +============== + +A library which filesystems can hook into to support transparent +encryption of files and directories. + +.. toctree:: + :maxdepth: 2 + + fscrypt diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 93e0a24045322b3e2417e024821520c9996eb6fc..17bb4dc28fae03371c328cc2135b576c4235ab03 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -501,10 +501,6 @@ in your dentry operations instead. is non-NULL. Note that link body isn't available anymore, so if you need it, store it as cookie. -- -[mandatory] - __fd_install() & fd_install() can now sleep. Callers should not - hold a spinlock or other resources that do not allow a schedule. --- [mandatory] any symlink that might use page_follow_link_light/page_put_link() must have inode_nohighmem(inode) called before anything might start playing with diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index adba21b5ada7b53fb9d0811039afba37141ed099..2a84bb3348947c1c0302ecfaa3a01a21fa558fef 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -181,6 +181,7 @@ read the file /proc/PID/status: VmPTE: 20 kb VmSwap: 0 kB HugetlbPages: 0 kB + CoreDumping: 0 Threads: 1 SigQ: 0/28578 SigPnd: 0000000000000000 @@ -250,10 +251,11 @@ Table 1-2: Contents of the status files (as of 4.8) VmExe size of text segment VmLib size of shared library code VmPTE size of page table entries - VmPMD size of second level page tables VmSwap amount of swap used by anonymous private data (shmem swap usage is not included) HugetlbPages size of hugetlb memory portions + CoreDumping process's memory is currently being dumped + (killing the process may lead to a corrupted core) Threads number of threads SigQ number of signals queued/max. number for queue SigPnd bitmap of pending signals for the thread diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.txt index 902b95d0ee511a95825dc61193347ce72cb6a5d2..d3d0e3218f860d30f9108b44f7cdc05cc39a3674 100644 --- a/Documentation/filesystems/udf.txt +++ b/Documentation/filesystems/udf.txt @@ -1,11 +1,9 @@ * * Documentation/filesystems/udf.txt * -UDF Filesystem version 0.9.8.1 If you encounter problems with reading UDF discs using this driver, -please report them to linux_udf@hpesjro.fc.hp.com, which is the -developer's list. +please report them according to MAINTAINERS file. Write support requires a block driver which supports writing. Currently dvd+rw drives and media support true random sector writes, and so a udf @@ -73,10 +71,8 @@ The following expect a offset from the partition root. For the latest version and toolset see: - http://linux-udf.sourceforge.net/ + https://github.com/pali/udftools Documentation on UDF and ECMA 167 is available FREE from: http://www.osta.org/ http://www.ecma-international.org/ - -Ben Fennema diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index 912568baabb9629083151fc4ed30578c066684cd..63e1bd1d88e324defd01d1ed1fddac5952629d55 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -10,14 +10,30 @@ Guidelines for GPIOs consumers ============================== Drivers that can't work without standard GPIO calls should have Kconfig entries -that depend on GPIOLIB. The functions that allow a driver to obtain and use -GPIOs are available by including the following file: +that depend on GPIOLIB or select GPIOLIB. The functions that allow a driver to +obtain and use GPIOs are available by including the following file: #include +There are static inline stubs for all functions in the header file in the case +where GPIOLIB is disabled. When these stubs are called they will emit +warnings. These stubs are used for two use cases: + +- Simple compile coverage with e.g. COMPILE_TEST - it does not matter that + the current platform does not enable or select GPIOLIB because we are not + going to execute the system anyway. + +- Truly optional GPIOLIB support - where the driver does not really make use + of the GPIOs on certain compile-time configurations for certain systems, but + will use it under other compile-time configurations. In this case the + consumer must make sure not to call into these functions, or the user will + be met with console warnings that may be perceived as intimidating. + All the functions that work with the descriptor-based GPIO interface are prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No -other function in the kernel should use these prefixes. +other function in the kernel should use these prefixes. The use of the legacy +functions is strongly discouraged, new code should use +and descriptors exclusively. Obtaining and Disposing GPIOs @@ -279,9 +295,22 @@ as possible, especially by drivers which should not care about the actual physical line level and worry about the logical value instead. -Set multiple GPIO outputs with a single function call ------------------------------------------------------ -The following functions set the output values of an array of GPIOs: +Access multiple GPIOs with a single function call +------------------------------------------------- +The following functions get or set the values of an array of GPIOs: + + int gpiod_get_array_value(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); + int gpiod_get_raw_array_value(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); + int gpiod_get_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); + int gpiod_get_raw_array_value_cansleep(unsigned int array_size, + struct gpio_desc **desc_array, + int *value_array); void gpiod_set_array_value(unsigned int array_size, struct gpio_desc **desc_array, @@ -296,34 +325,40 @@ The following functions set the output values of an array of GPIOs: struct gpio_desc **desc_array, int *value_array) -The array can be an arbitrary set of GPIOs. The functions will try to set +The array can be an arbitrary set of GPIOs. The functions will try to access GPIOs belonging to the same bank or chip simultaneously if supported by the corresponding chip driver. In that case a significantly improved performance -can be expected. If simultaneous setting is not possible the GPIOs will be set -sequentially. +can be expected. If simultaneous access is not possible the GPIOs will be +accessed sequentially. -The gpiod_set_array() functions take three arguments: +The functions take three arguments: * array_size - the number of array elements * desc_array - an array of GPIO descriptors - * value_array - an array of values to assign to the GPIOs + * value_array - an array to store the GPIOs' values (get) or + an array of values to assign to the GPIOs (set) The descriptor array can be obtained using the gpiod_get_array() function or one of its variants. If the group of descriptors returned by that function -matches the desired group of GPIOs, those GPIOs can be set by simply using +matches the desired group of GPIOs, those GPIOs can be accessed by simply using the struct gpio_descs returned by gpiod_get_array(): struct gpio_descs *my_gpio_descs = gpiod_get_array(...); gpiod_set_array_value(my_gpio_descs->ndescs, my_gpio_descs->desc, my_gpio_values); -It is also possible to set a completely arbitrary array of descriptors. The +It is also possible to access a completely arbitrary array of descriptors. The descriptors may be obtained using any combination of gpiod_get() and gpiod_get_array(). Afterwards the array of descriptors has to be setup -manually before it can be used with gpiod_set_array(). +manually before it can be passed to one of the above functions. Note that for optimal performance GPIOs belonging to the same chip should be contiguous within the array of descriptors. +The return value of gpiod_get_array_value() and its variants is 0 on success +or negative on error. Note the difference to gpiod_get_value(), which returns +0 or 1 on success to convey the GPIO value. With the array functions, the GPIO +values are stored in value_array rather than passed back as return value. + GPIOs mapped to IRQs -------------------- diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index fc1d2f83564d9386594ddad44a7761ce3ca88ae1..d8de1c7de85a748b266cc2329af8af31d4fbf3f6 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt @@ -254,7 +254,7 @@ GPIO irqchips usually fall in one of two categories: static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank) unsigned long wa_lock_flags; raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags); - generic_handle_irq(irq_find_mapping(bank->chip.irqdomain, bit)); + generic_handle_irq(irq_find_mapping(bank->chip.irq.domain, bit)); raw_spin_unlock_irqrestore(&bank->wa_lock, wa_lock_flags); * GENERIC CHAINED GPIO irqchips: these are the same as "CHAINED GPIO irqchips", @@ -313,8 +313,8 @@ symbol: mark all the child IRQs as having the other IRQ as parent. If there is a need to exclude certain GPIOs from the IRQ domain, you can -set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is -called. This allocates an .irq_valid_mask with as many bits set as there +set .irq.need_valid_mask of the gpiochip before gpiochip_add_data() is +called. This allocates an .irq.valid_mask with as many bits set as there are GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this mask. The mask must be filled in before gpiochip_irqchip_add() or gpiochip_irqchip_add_nested() is called. diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt index 5eacc147ea870c80bb06c38d43bd5b662c171194..8356d0e78f679c66bc69af8420eac2c4ace27f41 100644 --- a/Documentation/gpio/gpio-legacy.txt +++ b/Documentation/gpio/gpio-legacy.txt @@ -273,8 +273,8 @@ easily, gating off unused clocks. For GPIOs that use pins known to the pinctrl subsystem, that subsystem should be informed of their use; a gpiolib driver's .request() operation may call -pinctrl_request_gpio(), and a gpiolib driver's .free() operation may call -pinctrl_free_gpio(). The pinctrl subsystem allows a pinctrl_request_gpio() +pinctrl_gpio_request(), and a gpiolib driver's .free() operation may call +pinctrl_gpio_free(). The pinctrl subsystem allows a pinctrl_gpio_request() to succeed concurrently with a pin or pingroup being "owned" by a device for pin multiplexing. @@ -448,8 +448,8 @@ together with an optional gpio feature. We have already covered the case where e.g. a GPIO controller need to reserve a pin or set the direction of a pin by calling any of: -pinctrl_request_gpio() -pinctrl_free_gpio() +pinctrl_gpio_request() +pinctrl_gpio_free() pinctrl_gpio_direction_input() pinctrl_gpio_direction_output() @@ -466,7 +466,7 @@ gpio (under gpiolib) is still maintained by gpio drivers. It may happen that different pin ranges in a SoC is managed by different gpio drivers. This makes it logical to let gpio drivers announce their pin ranges to -the pin ctrl subsystem before it will call 'pinctrl_request_gpio' in order +the pin ctrl subsystem before it will call 'pinctrl_gpio_request' in order to request the corresponding pin to be prepared by the pinctrl subsystem before any gpio usage. diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index 679373b4a03f2189e14cce4c30686bdc947eb5a1..a2214cc1f821a3bb4b9b096adf3df5e29874a838 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -168,6 +168,61 @@ IOCTL Support on Device Nodes .. kernel-doc:: drivers/gpu/drm/drm_ioctl.c :doc: driver specific ioctls +Recommended IOCTL Return Values +------------------------------- + +In theory a driver's IOCTL callback is only allowed to return very few error +codes. In practice it's good to abuse a few more. This section documents common +practice within the DRM subsystem: + +ENOENT: + Strictly this should only be used when a file doesn't exist e.g. when + calling the open() syscall. We reuse that to signal any kind of object + lookup failure, e.g. for unknown GEM buffer object handles, unknown KMS + object handles and similar cases. + +ENOSPC: + Some drivers use this to differentiate "out of kernel memory" from "out + of VRAM". Sometimes also applies to other limited gpu resources used for + rendering (e.g. when you have a special limited compression buffer). + Sometimes resource allocation/reservation issues in command submission + IOCTLs are also signalled through EDEADLK. + + Simply running out of kernel/system memory is signalled through ENOMEM. + +EPERM/EACCESS: + Returned for an operation that is valid, but needs more privileges. + E.g. root-only or much more common, DRM master-only operations return + this when when called by unpriviledged clients. There's no clear + difference between EACCESS and EPERM. + +ENODEV: + Feature (like PRIME, modesetting, GEM) is not supported by the driver. + +ENXIO: + Remote failure, either a hardware transaction (like i2c), but also used + when the exporting driver of a shared dma-buf or fence doesn't support a + feature needed. + +EINTR: + DRM drivers assume that userspace restarts all IOCTLs. Any DRM IOCTL can + return EINTR and in such a case should be restarted with the IOCTL + parameters left unchanged. + +EIO: + The GPU died and couldn't be resurrected through a reset. Modesetting + hardware failures are signalled through the "link status" connector + property. + +EINVAL: + Catch-all for anything that is an invalid argument combination which + cannot work. + +IOCTL also use other error codes like ETIME, EFAULT, EBUSY, ENOTTY but their +usage is in line with the common meanings. The above list tries to just document +DRM specific patterns. Note that ENOTTY has the slightly unintuitive meaning of +"this IOCTL does not exist", and is used exactly as such in DRM. + .. kernel-doc:: include/drm/drm_ioctl.h :internal: diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index 35d673bf9b569537321d8268c6f594cb9ff6475b..c36586dad29d20bf7b1704efa87f69945c31a542 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -15,6 +15,7 @@ Linux GPU Driver Developer's Guide pl111 tegra tinydrm + tve200 vc4 vga-switcheroo vgaarbiter diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 22af55d06ab8d6be092cf9d8699a9c4e09cd5260..36625aa66c27672c00219e1283d4ecb034913e40 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -75,17 +75,6 @@ helpers. Contact: Ville Syrjälä, Daniel Vetter, driver maintainers -Implement deferred fbdev setup in the helper --------------------------------------------- - -Many (especially embedded drivers) want to delay fbdev setup until there's a -real screen plugged in. This is to avoid the dreaded fallback to the low-res -fbdev default. Many drivers have a hacked-up (and often broken) version of this, -better to do it once in the shared helpers. Thierry has a patch series, but that -one needs to be rebased and final polish applied. - -Contact: Thierry Reding, Daniel Vetter, driver maintainers - Convert early atomic drivers to async commit helpers ---------------------------------------------------- @@ -138,6 +127,8 @@ interfaces to fix these issues: the acquire context explicitly on stack and then also pass it down into drivers explicitly so that the legacy-on-atomic functions can use them. + Except for some driver code this is done. + * A bunch of the vtable hooks are now in the wrong place: DRM has a split between core vfunc tables (named ``drm_foo_funcs``), which are used to implement the userspace ABI. And then there's the optional hooks for the @@ -151,6 +142,8 @@ interfaces to fix these issues: connector at runtime. That's almost all of them, and would allow us to get rid of a lot of ``best_encoder`` boilerplate in drivers. + This was almost done, but new drivers added a few more cases again. + Contact: Daniel Vetter Get rid of dev->struct_mutex from GEM drivers @@ -177,14 +170,19 @@ following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and Contact: Daniel Vetter, respective driver maintainers -Core refactorings -================= +Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent +---------------------------------------------------------------------------- -Use new IDR deletion interface to clean up drm_gem_handle_delete() ------------------------------------------------------------------- +For drivers which could have multiple instances, it is necessary to +differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR +don't do this, drivers used dev_info/warn/err to make this differentiation. We +now have DRM_DEV_* variants of the drm print macros, so we can start to convert +those drivers back to using drm-formwatted specific log messages. -See the "This is gross" comment -- apparently the IDR system now can return an -error code instead of oopsing. +Contact: Sean Paul, Maintainer of the driver you plan to convert + +Core refactorings +================= Clean up the DRM header mess ---------------------------- @@ -306,6 +304,18 @@ There's a bunch of issues with it: Contact: Daniel Vetter +KMS cleanups +------------ + +Some of these date from the very introduction of KMS in 2008 ... + +- drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should + be renamed to drm_mode_config.object_idr. + +- drm_display_mode doesn't need to be derived from drm_mode_object. That's + leftovers from older (never merged into upstream) KMS designs where modes + where set using their ID, including support to add/remove modes. + Better Testing ============== @@ -353,7 +363,16 @@ those drivers as simple as possible, so lots of room for refactoring: - backlight helpers, probably best to put them into a new drm_backlight.c. This is because drivers/video is de-facto unmaintained. We could also move drivers/video/backlight to drivers/gpu/backlight and take it all - over within drm-misc, but that's more work. + over within drm-misc, but that's more work. Backlight helpers require a fair + bit of reworking and refactoring. A simple example is the enabling of a backlight. + Tinydrm has helpers for this. It would be good if other drivers can also use the + helper. However, there are various cases we need to consider i.e different + drivers seem to have different ways of enabling/disabling a backlight. + We also need to consider the backlight drivers (like gpio_backlight). The situation + is further complicated by the fact that the backlight is tied to fbdev + via fb_notifier_callback() which has complicated logic. For further details, refer + to the following discussion thread: + https://groups.google.com/forum/#!topic/outreachy-kernel/8rBe30lwtdA - spi helpers, probably best put into spi core/helper code. Thierry said the spi maintainer is fast&reactive, so shouldn't be a big issue. @@ -390,5 +409,15 @@ those drivers as simple as possible, so lots of room for refactoring: Contact: Noralf Trønnes, Daniel Vetter +AMD DC Display Driver +--------------------- + +AMD DC is the display driver for AMD devices starting with Vega. There has been +a bunch of progress cleaning it up but there's still plenty of work to be done. + +See drivers/gpu/drm/amd/display/TODO for tasks. + +Contact: Harry Wentland, Alex Deucher + Outside DRM =========== diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst new file mode 100644 index 0000000000000000000000000000000000000000..69b17b324e1273bd5353cf9e19bbbee428bfe917 --- /dev/null +++ b/Documentation/gpu/tve200.rst @@ -0,0 +1,6 @@ +================================== + drm/tve200 Faraday TV Encoder 200 +================================== + +.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c + :doc: Faraday TV Encoder 200 diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index f6f80380dff2fa0851c5ae02de27497e9bc9c0df..71e9feefb63c46b515855b41ac64c926f7ee50bb 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -1158,7 +1158,6 @@ When kbuild executes, the following steps are followed (roughly): Example: targets += $(dtb-y) - clean-files += *.dtb DTC_FLAGS ?= -p 1024 --- 6.8 Custom kbuild commands diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX index b4ef1f34e25faafe544971f619019d748538e4de..ae626b29a7402352c94b7c9beea69ea96e6a25ec 100644 --- a/Documentation/leds/00-INDEX +++ b/Documentation/leds/00-INDEX @@ -4,6 +4,10 @@ leds-blinkm.txt - Driver for BlinkM LED-devices. leds-class.txt - documents LED handling under Linux. +leds-class-flash.txt + - documents flash LED handling under Linux. +leds-lm3556.txt + - notes on how to use the leds-lm3556 driver. leds-lp3944.txt - notes on how to use the leds-lp3944 driver. leds-lp5521.txt @@ -16,7 +20,13 @@ leds-lp55xx.txt - description about lp55xx common driver. leds-lm3556.txt - notes on how to use the leds-lm3556 driver. +leds-mlxcpld.txt + - notes on how to use the leds-mlxcpld driver. ledtrig-oneshot.txt - One-shot LED trigger for both sporadic and dense events. ledtrig-transient.txt - LED Transient Trigger, one shot timer activation. +ledtrig-usbport.txt + - notes on how to use the drivers/usb/core/ledtrig-usbport.c trigger. +uleds.txt + - notes on how to use the uleds driver. diff --git a/Documentation/livepatch/callbacks.txt b/Documentation/livepatch/callbacks.txt new file mode 100644 index 0000000000000000000000000000000000000000..c9776f48e45847d9b33bfd0f42ee04cd54dd45e6 --- /dev/null +++ b/Documentation/livepatch/callbacks.txt @@ -0,0 +1,605 @@ +====================== +(Un)patching Callbacks +====================== + +Livepatch (un)patch-callbacks provide a mechanism for livepatch modules +to execute callback functions when a kernel object is (un)patched. They +can be considered a "power feature" that extends livepatching abilities +to include: + + - Safe updates to global data + + - "Patches" to init and probe functions + + - Patching otherwise unpatchable code (i.e. assembly) + +In most cases, (un)patch callbacks will need to be used in conjunction +with memory barriers and kernel synchronization primitives, like +mutexes/spinlocks, or even stop_machine(), to avoid concurrency issues. + +Callbacks differ from existing kernel facilities: + + - Module init/exit code doesn't run when disabling and re-enabling a + patch. + + - A module notifier can't stop a to-be-patched module from loading. + +Callbacks are part of the klp_object structure and their implementation +is specific to that klp_object. Other livepatch objects may or may not +be patched, irrespective of the target klp_object's current state. + +Callbacks can be registered for the following livepatch actions: + + * Pre-patch - before a klp_object is patched + + * Post-patch - after a klp_object has been patched and is active + across all tasks + + * Pre-unpatch - before a klp_object is unpatched (ie, patched code is + active), used to clean up post-patch callback + resources + + * Post-unpatch - after a klp_object has been patched, all code has + been restored and no tasks are running patched code, + used to cleanup pre-patch callback resources + +Each callback is optional, omitting one does not preclude specifying any +other. However, the livepatching core executes the handlers in +symmetry: pre-patch callbacks have a post-unpatch counterpart and +post-patch callbacks have a pre-unpatch counterpart. An unpatch +callback will only be executed if its corresponding patch callback was +executed. Typical use cases pair a patch handler that acquires and +configures resources with an unpatch handler tears down and releases +those same resources. + +A callback is only executed if its host klp_object is loaded. For +in-kernel vmlinux targets, this means that callbacks will always execute +when a livepatch is enabled/disabled. For patch target kernel modules, +callbacks will only execute if the target module is loaded. When a +module target is (un)loaded, its callbacks will execute only if the +livepatch module is enabled. + +The pre-patch callback, if specified, is expected to return a status +code (0 for success, -ERRNO on error). An error status code indicates +to the livepatching core that patching of the current klp_object is not +safe and to stop the current patching request. (When no pre-patch +callback is provided, the transition is assumed to be safe.) If a +pre-patch callback returns failure, the kernel's module loader will: + + - Refuse to load a livepatch, if the livepatch is loaded after + targeted code. + + or: + + - Refuse to load a module, if the livepatch was already successfully + loaded. + +No post-patch, pre-unpatch, or post-unpatch callbacks will be executed +for a given klp_object if the object failed to patch, due to a failed +pre_patch callback or for any other reason. + +If a patch transition is reversed, no pre-unpatch handlers will be run +(this follows the previously mentioned symmetry -- pre-unpatch callbacks +will only occur if their corresponding post-patch callback executed). + +If the object did successfully patch, but the patch transition never +started for some reason (e.g., if another object failed to patch), +only the post-unpatch callback will be called. + + +Example Use-cases +================= + +Update global data +------------------ + +A pre-patch callback can be useful to update a global variable. For +example, 75ff39ccc1bd ("tcp: make challenge acks less predictable") +changes a global sysctl, as well as patches the tcp_send_challenge_ack() +function. + +In this case, if we're being super paranoid, it might make sense to +patch the data *after* patching is complete with a post-patch callback, +so that tcp_send_challenge_ack() could first be changed to read +sysctl_tcp_challenge_ack_limit with READ_ONCE. + + +Support __init and probe function patches +----------------------------------------- + +Although __init and probe functions are not directly livepatch-able, it +may be possible to implement similar updates via pre/post-patch +callbacks. + +48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST") change the way that +virtnet_probe() initialized its driver's net_device features. A +pre/post-patch callback could iterate over all such devices, making a +similar change to their hw_features value. (Client functions of the +value may need to be updated accordingly.) + + +Test cases +========== + +What follows is not an exhaustive test suite of every possible livepatch +pre/post-(un)patch combination, but a selection that demonstrates a few +important concepts. Each test case uses the kernel modules located in +the samples/livepatch/ and assumes that no livepatches are loaded at the +beginning of the test. + + +Test 1 +------ + +Test a combination of loading a kernel module and a livepatch that +patches a function in the first module. (Un)load the target module +before the livepatch module: + +- load target module +- load livepatch +- disable livepatch +- unload target module +- unload livepatch + +First load a target module: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 34.475708] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +On livepatch enable, before the livepatch transition starts, pre-patch +callbacks are executed for vmlinux and livepatch_callbacks_mod (those +klp_objects currently loaded). After klp_objects are patched according +to the klp_patch, their post-patch callbacks run and the transition +completes: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 36.503719] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 36.504213] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 36.504238] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 36.504721] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 36.505849] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 37.727133] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 37.727232] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 37.727860] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 37.728792] livepatch: 'livepatch_callbacks_demo': patching complete + +Similarly, on livepatch disable, pre-patch callbacks run before the +unpatching transition starts. klp_objects are reverted, post-patch +callbacks execute and the transition completes: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 38.510209] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 38.510234] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 38.510982] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 38.512209] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 39.711132] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 39.711210] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 39.711779] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 39.712735] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 42.534183] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + + +Test 2 +------ + +This test is similar to the previous test, but (un)load the livepatch +module before the target kernel module. This tests the livepatch core's +module_coming handler: + +- load livepatch +- load target module +- disable livepatch +- unload livepatch +- unload target module + + +On livepatch enable, only pre/post-patch callbacks are executed for +currently loaded klp_objects, in this case, vmlinux: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 44.553328] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 44.553997] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 44.554049] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 44.554845] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 45.727128] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 45.727212] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 45.727961] livepatch: 'livepatch_callbacks_demo': patching complete + +When a targeted module is subsequently loaded, only its pre/post-patch +callbacks are executed: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 46.560845] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 46.561988] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 46.563452] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 46.565495] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +On livepatch disable, all currently loaded klp_objects' (vmlinux and +livepatch_callbacks_mod) pre/post-unpatch callbacks are executed: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 48.568885] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 48.568910] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 48.569441] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 48.570502] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 49.759091] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 49.759171] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 49.759742] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 49.760690] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 52.592283] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + + +Test 3 +------ + +Test loading the livepatch after a targeted kernel module, then unload +the kernel module before disabling the livepatch. This tests the +livepatch core's module_going handler: + +- load target module +- load livepatch +- unload target module +- disable livepatch +- unload livepatch + +First load a target module, then the livepatch: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 54.607948] livepatch_callbacks_mod: livepatch_callbacks_mod_init + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 56.613919] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 56.614411] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 56.614436] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 56.614818] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 56.615656] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 57.759070] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 57.759147] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 57.759621] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_LIVE] Normal state + [ 57.760307] livepatch: 'livepatch_callbacks_demo': patching complete + +When a target module is unloaded, the livepatch is only reverted from +that klp_object (livepatch_callbacks_mod). As such, only its pre and +post-unpatch callbacks are executed when this occurs: + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 58.623409] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 58.623903] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + [ 58.624658] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 58.625305] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + +When the livepatch is disabled, pre and post-unpatch callbacks are run +for the remaining klp_object, vmlinux: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 60.638420] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 60.638444] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 60.638996] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 61.727088] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 61.727165] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 61.727985] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 4 +------ + +This test is similar to the previous test, however the livepatch is +loaded first. This tests the livepatch core's module_coming and +module_going handlers: + +- load livepatch +- load target module +- unload target module +- disable livepatch +- unload livepatch + +First load the livepatch: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 64.661552] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 64.662147] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 64.662175] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 64.662850] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 65.695056] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 65.695147] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 65.695561] livepatch: 'livepatch_callbacks_demo': patching complete + +When a targeted kernel module is subsequently loaded, only its +pre/post-patch callbacks are executed: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 66.669196] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 66.669882] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 66.670744] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 66.672873] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +When the target module is unloaded, the livepatch is only reverted from +the livepatch_callbacks_mod klp_object. As such, only pre and +post-unpatch callbacks are executed when this occurs: + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 68.680065] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 68.680688] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + [ 68.681452] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 68.682094] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 70.689225] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 70.689256] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 70.689882] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 71.711080] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 71.711481] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 71.711988] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 5 +------ + +A simple test of loading a livepatch without one of its patch target +klp_objects ever loaded (livepatch_callbacks_mod): + +- load livepatch +- disable livepatch +- unload livepatch + +Load the livepatch: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 74.711081] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 74.711595] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 74.711639] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 74.712272] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 75.743137] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 75.743219] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 75.743867] livepatch: 'livepatch_callbacks_demo': patching complete + +As expected, only pre/post-(un)patch handlers are executed for vmlinux: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 76.716254] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 76.716278] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 76.716666] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 77.727089] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 77.727194] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 77.727907] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 6 +------ + +Test a scenario where a vmlinux pre-patch callback returns a non-zero +status (ie, failure): + +- load target module +- load livepatch -ENODEV +- unload target module + +First load a target module: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 80.740520] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +Load the livepatch module, setting its 'pre_patch_ret' value to -19 +(-ENODEV). When its vmlinux pre-patch callback executed, this status +code will propagate back to the module-loading subsystem. The result is +that the insmod command refuses to load the livepatch module: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko pre_patch_ret=-19 + [ 82.747326] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 82.747743] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 82.747767] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 82.748237] livepatch: pre-patch callback failed for object 'vmlinux' + [ 82.748637] livepatch: failed to enable patch 'livepatch_callbacks_demo' + [ 82.749059] livepatch: 'livepatch_callbacks_demo': canceling transition, going to unpatch + [ 82.749060] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 82.749868] livepatch: 'livepatch_callbacks_demo': unpatching complete + [ 82.765809] insmod: ERROR: could not insert module samples/livepatch/livepatch-callbacks-demo.ko: No such device + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 84.774238] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + + +Test 7 +------ + +Similar to the previous test, setup a livepatch such that its vmlinux +pre-patch callback returns success. However, when a targeted kernel +module is later loaded, have the livepatch return a failing status code: + +- load livepatch +- setup -ENODEV +- load target module +- disable livepatch +- unload livepatch + +Load the livepatch, notice vmlinux pre-patch callback succeeds: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 86.787845] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 86.788325] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 86.788427] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 86.788821] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 87.711069] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 87.711143] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 87.711886] livepatch: 'livepatch_callbacks_demo': patching complete + +Set a trap so subsequent pre-patch callbacks to this livepatch will +return -ENODEV: + + % echo -19 > /sys/module/livepatch_callbacks_demo/parameters/pre_patch_ret + +The livepatch pre-patch callback for subsequently loaded target modules +will return failure, so the module loader refuses to load the kernel +module. Notice that no post-patch or pre/post-unpatch callbacks are +executed for this klp_object: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 90.796976] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 90.797834] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 90.798900] livepatch: pre-patch callback failed for object 'livepatch_callbacks_mod' + [ 90.799652] livepatch: patch 'livepatch_callbacks_demo' failed for module 'livepatch_callbacks_mod', refusing to load module 'livepatch_callbacks_mod' + [ 90.819737] insmod: ERROR: could not insert module samples/livepatch/livepatch-callbacks-mod.ko: No such device + +However, pre/post-unpatch callbacks run for the vmlinux klp_object: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 92.823547] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 92.823573] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 92.824331] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 93.727128] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 93.727327] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 93.727861] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + + +Test 8 +------ + +Test loading multiple targeted kernel modules. This test-case is +mainly for comparing with the next test-case. + +- load busy target module (0s sleep), +- load livepatch +- load target module +- unload target module +- disable livepatch +- unload livepatch +- unload busy target module + + +Load a target "busy" kernel module which kicks off a worker function +that immediately exits: + + % insmod samples/livepatch/livepatch-callbacks-busymod.ko sleep_secs=0 + [ 96.910107] livepatch_callbacks_busymod: livepatch_callbacks_mod_init + [ 96.910600] livepatch_callbacks_busymod: busymod_work_func, sleeping 0 seconds ... + [ 96.913024] livepatch_callbacks_busymod: busymod_work_func exit + +Proceed with loading the livepatch and another ordinary target module, +notice that the post-patch callbacks are executed and the transition +completes quickly: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 98.917892] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 98.918426] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 98.918453] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 98.918955] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 98.923835] livepatch: 'livepatch_callbacks_demo': starting patching transition + [ 99.743104] livepatch: 'livepatch_callbacks_demo': completing patching transition + [ 99.743156] livepatch_callbacks_demo: post_patch_callback: vmlinux + [ 99.743679] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 99.744616] livepatch: 'livepatch_callbacks_demo': patching complete + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 100.930955] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 100.931668] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 100.932645] livepatch_callbacks_demo: post_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 100.934125] livepatch_callbacks_mod: livepatch_callbacks_mod_init + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 102.942805] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 102.943640] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + [ 102.944585] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 102.945455] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 104.953815] livepatch: 'livepatch_callbacks_demo': initializing unpatching transition + [ 104.953838] livepatch_callbacks_demo: pre_unpatch_callback: vmlinux + [ 104.954431] livepatch_callbacks_demo: pre_unpatch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 104.955426] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 106.719073] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 106.722633] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 106.723282] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 106.724279] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-busymod.ko + [ 108.975660] livepatch_callbacks_busymod: livepatch_callbacks_mod_exit + + +Test 9 +------ + +A similar test as the previous one, but force the "busy" kernel module +to do longer work. + +The livepatching core will refuse to patch a task that is currently +executing a to-be-patched function -- the consistency model stalls the +current patch transition until this safety-check is met. Test a +scenario where one of a livepatch's target klp_objects sits on such a +function for a long time. Meanwhile, load and unload other target +kernel modules while the livepatch transition is in progress. + +- load busy target module (30s sleep) +- load livepatch +- load target module +- unload target module +- disable livepatch +- unload livepatch +- unload busy target module + + +Load the "busy" kernel module, this time make it do 30 seconds worth of +work: + + % insmod samples/livepatch/livepatch-callbacks-busymod.ko sleep_secs=30 + [ 110.993362] livepatch_callbacks_busymod: livepatch_callbacks_mod_init + [ 110.994059] livepatch_callbacks_busymod: busymod_work_func, sleeping 30 seconds ... + +Meanwhile, the livepatch is loaded. Notice that the patch transition +does not complete as the targeted "busy" module is sitting on a +to-be-patched function: + + % insmod samples/livepatch/livepatch-callbacks-demo.ko + [ 113.000309] livepatch: enabling patch 'livepatch_callbacks_demo' + [ 113.000764] livepatch: 'livepatch_callbacks_demo': initializing patching transition + [ 113.000791] livepatch_callbacks_demo: pre_patch_callback: vmlinux + [ 113.001289] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 113.005208] livepatch: 'livepatch_callbacks_demo': starting patching transition + +Load a second target module (this one is an ordinary idle kernel +module). Note that *no* post-patch callbacks will be executed while the +livepatch is still in transition: + + % insmod samples/livepatch/livepatch-callbacks-mod.ko + [ 115.012740] livepatch: applying patch 'livepatch_callbacks_demo' to loading module 'livepatch_callbacks_mod' + [ 115.013406] livepatch_callbacks_demo: pre_patch_callback: livepatch_callbacks_mod -> [MODULE_STATE_COMING] Full formed, running module_init + [ 115.015315] livepatch_callbacks_mod: livepatch_callbacks_mod_init + +Request an unload of the simple kernel module. The patch is still +transitioning, so its pre-unpatch callbacks are skipped: + + % rmmod samples/livepatch/livepatch-callbacks-mod.ko + [ 117.022626] livepatch_callbacks_mod: livepatch_callbacks_mod_exit + [ 117.023376] livepatch: reverting patch 'livepatch_callbacks_demo' on unloading module 'livepatch_callbacks_mod' + [ 117.024533] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_mod -> [MODULE_STATE_GOING] Going away + +Finally the livepatch is disabled. Since none of the patch's +klp_object's post-patch callbacks executed, the remaining klp_object's +pre-unpatch callbacks are skipped: + + % echo 0 > /sys/kernel/livepatch/livepatch_callbacks_demo/enabled + [ 119.035408] livepatch: 'livepatch_callbacks_demo': reversing transition from patching to unpatching + [ 119.035485] livepatch: 'livepatch_callbacks_demo': starting unpatching transition + [ 119.711166] livepatch: 'livepatch_callbacks_demo': completing unpatching transition + [ 119.714179] livepatch_callbacks_demo: post_unpatch_callback: vmlinux + [ 119.714653] livepatch_callbacks_demo: post_unpatch_callback: livepatch_callbacks_busymod -> [MODULE_STATE_LIVE] Normal state + [ 119.715437] livepatch: 'livepatch_callbacks_demo': unpatching complete + + % rmmod samples/livepatch/livepatch-callbacks-demo.ko + % rmmod samples/livepatch/livepatch-callbacks-busymod.ko + [ 141.279111] livepatch_callbacks_busymod: busymod_work_func exit + [ 141.279760] livepatch_callbacks_busymod: livepatch_callbacks_mod_exit diff --git a/Documentation/livepatch/shadow-vars.txt b/Documentation/livepatch/shadow-vars.txt new file mode 100644 index 0000000000000000000000000000000000000000..89c66634d600c2753c1b4b68db8dafa7a2b5b106 --- /dev/null +++ b/Documentation/livepatch/shadow-vars.txt @@ -0,0 +1,192 @@ +================ +Shadow Variables +================ + +Shadow variables are a simple way for livepatch modules to associate +additional "shadow" data with existing data structures. Shadow data is +allocated separately from parent data structures, which are left +unmodified. The shadow variable API described in this document is used +to allocate/add and remove/free shadow variables to/from their parents. + +The implementation introduces a global, in-kernel hashtable that +associates pointers to parent objects and a numeric identifier of the +shadow data. The numeric identifier is a simple enumeration that may be +used to describe shadow variable version, class or type, etc. More +specifically, the parent pointer serves as the hashtable key while the +numeric id subsequently filters hashtable queries. Multiple shadow +variables may attach to the same parent object, but their numeric +identifier distinguishes between them. + + +1. Brief API summary +==================== + +(See the full API usage docbook notes in livepatch/shadow.c.) + +A hashtable references all shadow variables. These references are +stored and retrieved through a pair. + +* The klp_shadow variable data structure encapsulates both tracking +meta-data and shadow-data: + - meta-data + - obj - pointer to parent object + - id - data identifier + - data[] - storage for shadow data + +It is important to note that the klp_shadow_alloc() and +klp_shadow_get_or_alloc() calls, described below, store a *copy* of the +data that the functions are provided. Callers should provide whatever +mutual exclusion is required of the shadow data. + +* klp_shadow_get() - retrieve a shadow variable data pointer + - search hashtable for pair + +* klp_shadow_alloc() - allocate and add a new shadow variable + - search hashtable for pair + - if exists + - WARN and return NULL + - if doesn't already exist + - allocate a new shadow variable + - copy data into the new shadow variable + - add to the global hashtable + +* klp_shadow_get_or_alloc() - get existing or alloc a new shadow variable + - search hashtable for pair + - if exists + - return existing shadow variable + - if doesn't already exist + - allocate a new shadow variable + - copy data into the new shadow variable + - add pair to the global hashtable + +* klp_shadow_free() - detach and free a shadow variable + - find and remove a reference from global hashtable + - if found, free shadow variable + +* klp_shadow_free_all() - detach and free all <*, id> shadow variables + - find and remove any <*, id> references from global hashtable + - if found, free shadow variable + + +2. Use cases +============ + +(See the example shadow variable livepatch modules in samples/livepatch/ +for full working demonstrations.) + +For the following use-case examples, consider commit 1d147bfa6429 +("mac80211: fix AP powersave TX vs. wakeup race"), which added a +spinlock to net/mac80211/sta_info.h :: struct sta_info. Each use-case +example can be considered a stand-alone livepatch implementation of this +fix. + + +Matching parent's lifecycle +--------------------------- + +If parent data structures are frequently created and destroyed, it may +be easiest to align their shadow variables lifetimes to the same +allocation and release functions. In this case, the parent data +structure is typically allocated, initialized, then registered in some +manner. Shadow variable allocation and setup can then be considered +part of the parent's initialization and should be completed before the +parent "goes live" (ie, any shadow variable get-API requests are made +for this pair.) + +For commit 1d147bfa6429, when a parent sta_info structure is allocated, +allocate a shadow copy of the ps_lock pointer, then initialize it: + +#define PS_LOCK 1 +struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, + const u8 *addr, gfp_t gfp) +{ + struct sta_info *sta; + spinlock_t *ps_lock; + + /* Parent structure is created */ + sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp); + + /* Attach a corresponding shadow variable, then initialize it */ + ps_lock = klp_shadow_alloc(sta, PS_LOCK, NULL, sizeof(*ps_lock), gfp); + if (!ps_lock) + goto shadow_fail; + spin_lock_init(ps_lock); + ... + +When requiring a ps_lock, query the shadow variable API to retrieve one +for a specific struct sta_info: + +void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) +{ + spinlock_t *ps_lock; + + /* sync with ieee80211_tx_h_unicast_ps_buf */ + ps_lock = klp_shadow_get(sta, PS_LOCK); + if (ps_lock) + spin_lock(ps_lock); + ... + +When the parent sta_info structure is freed, first free the shadow +variable: + +void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) +{ + klp_shadow_free(sta, PS_LOCK); + kfree(sta); + ... + + +In-flight parent objects +------------------------ + +Sometimes it may not be convenient or possible to allocate shadow +variables alongside their parent objects. Or a livepatch fix may +require shadow varibles to only a subset of parent object instances. In +these cases, the klp_shadow_get_or_alloc() call can be used to attach +shadow variables to parents already in-flight. + +For commit 1d147bfa6429, a good spot to allocate a shadow spinlock is +inside ieee80211_sta_ps_deliver_wakeup(): + +#define PS_LOCK 1 +void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) +{ + DEFINE_SPINLOCK(ps_lock_fallback); + spinlock_t *ps_lock; + + /* sync with ieee80211_tx_h_unicast_ps_buf */ + ps_lock = klp_shadow_get_or_alloc(sta, PS_LOCK, + &ps_lock_fallback, sizeof(ps_lock_fallback), + GFP_ATOMIC); + if (ps_lock) + spin_lock(ps_lock); + ... + +This usage will create a shadow variable, only if needed, otherwise it +will use one that was already created for this pair. + +Like the previous use-case, the shadow spinlock needs to be cleaned up. +A shadow variable can be freed just before its parent object is freed, +or even when the shadow variable itself is no longer required. + + +Other use-cases +--------------- + +Shadow variables can also be used as a flag indicating that a data +structure was allocated by new, livepatched code. In this case, it +doesn't matter what data value the shadow variable holds, its existence +suggests how to handle the parent object. + + +3. References +============= + +* https://github.com/dynup/kpatch +The livepatch implementation is based on the kpatch version of shadow +variables. + +* http://files.mkgnu.net/files/dynamos/doc/papers/dynamos_eurosys_07.pdf +Dynamic and Adaptive Updates of Non-Quiescent Subsystems in Commodity +Operating System Kernels (Kritis Makris, Kyung Dong Ryu 2007) presented +a datatype update technique called "shadow data structures". diff --git a/Documentation/md/md-cluster.txt b/Documentation/md/md-cluster.txt index 82ee51604e9ad498ca52a66dc95086ae10d1e98b..e1055f105cf5c474a184a6f60fa281b7df3f4ae2 100644 --- a/Documentation/md/md-cluster.txt +++ b/Documentation/md/md-cluster.txt @@ -1,4 +1,5 @@ -The cluster MD is a shared-device RAID for a cluster. +The cluster MD is a shared-device RAID for a cluster, it supports +two levels: raid1 and raid10 (limited support). 1. On-disk format diff --git a/Documentation/media/cec.h.rst.exceptions b/Documentation/media/cec.h.rst.exceptions index b1687532742f91787ae2b7fd8ac3acd87026de66..d9fd092de6f8b3fae015e1f09658007dfadef6b7 100644 --- a/Documentation/media/cec.h.rst.exceptions +++ b/Documentation/media/cec.h.rst.exceptions @@ -24,8 +24,6 @@ ignore define CEC_VENDOR_ID_NONE ignore define CEC_MODE_INITIATOR_MSK ignore define CEC_MODE_FOLLOWER_MSK -ignore define CEC_EVENT_FL_INITIAL_STATE - # Part of CEC 2.0 spec - shouldn't be documented too? ignore define CEC_LOG_ADDR_TV ignore define CEC_LOG_ADDR_RECORD_1 diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst index 28866259998c9f547e01fa2f5a52e03a681b8814..d37e107f2fde5fe092474dd375dc8e96ad17a9f5 100644 --- a/Documentation/media/kapi/cec-core.rst +++ b/Documentation/media/kapi/cec-core.rst @@ -227,8 +227,8 @@ CEC_TX_STATUS_LOW_DRIVE: retransmission. CEC_TX_STATUS_ERROR: - some unspecified error occurred: this can be one of - the previous two if the hardware cannot differentiate or something + some unspecified error occurred: this can be one of ARB_LOST + or LOW_DRIVE if the hardware cannot differentiate or something else entirely. CEC_TX_STATUS_MAX_RETRIES: @@ -238,6 +238,9 @@ CEC_TX_STATUS_MAX_RETRIES: doesn't have to make another attempt to transmit the message since the hardware did that already. +The hardware must be able to differentiate between OK, NACK and 'something +else'. + The \*_cnt arguments are the number of error conditions that were seen. This may be 0 if no information is available. Drivers that do not support hardware retry can just set the counter corresponding to the transmit error diff --git a/Documentation/media/kapi/dtv-ca.rst b/Documentation/media/kapi/dtv-ca.rst new file mode 100644 index 0000000000000000000000000000000000000000..a4dd700189b0851399321e4811f804592e78fe92 --- /dev/null +++ b/Documentation/media/kapi/dtv-ca.rst @@ -0,0 +1,4 @@ +Digital TV Conditional Access kABI +---------------------------------- + +.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h diff --git a/Documentation/media/kapi/dtv-common.rst b/Documentation/media/kapi/dtv-common.rst new file mode 100644 index 0000000000000000000000000000000000000000..40cf1033b5e1f934af49c2bb37cf67d40d09bcd9 --- /dev/null +++ b/Documentation/media/kapi/dtv-common.rst @@ -0,0 +1,55 @@ +Digital TV Common functions +--------------------------- + +Math functions +~~~~~~~~~~~~~~ + +Provide some commonly-used math functions, usually required in order to +estimate signal strength and signal to noise measurements in dB. + +.. kernel-doc:: drivers/media/dvb-core/dvb_math.h + + +DVB devices +~~~~~~~~~~~ + +Those functions are responsible for handling the DVB device nodes. + +.. kernel-doc:: drivers/media/dvb-core/dvbdev.h + +Digital TV Ring buffer +~~~~~~~~~~~~~~~~~~~~~~ + +Those routines implement ring buffers used to handle digital TV data and +copy it from/to userspace. + +.. note:: + + 1) For performance reasons read and write routines don't check buffer sizes + and/or number of bytes free/available. This has to be done before these + routines are called. For example: + + .. code-block:: c + + /* write @buflen: bytes */ + free = dvb_ringbuffer_free(rbuf); + if (free >= buflen) + count = dvb_ringbuffer_write(rbuf, buffer, buflen); + else + /* do something */ + + /* read min. 1000, max. @bufsize: bytes */ + avail = dvb_ringbuffer_avail(rbuf); + if (avail >= 1000) + count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize)); + else + /* do something */ + + 2) If there is exactly one reader and one writer, there is no need + to lock read or write operations. + Two or more readers must be locked against each other. + Flushing the buffer counts as a read operation. + Resetting the buffer counts as a read and write operation. + Two or more writers must be locked against each other. + +.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst index de9a228aca8a862ff585b374a498bbc9d103ef1c..bca743dc6b435396f470b9b6b82e62b505465c1e 100644 --- a/Documentation/media/kapi/dtv-core.rst +++ b/Documentation/media/kapi/dtv-core.rst @@ -26,572 +26,12 @@ I2C bus. abandoned standard, not used anymore) and ATSC version 3.0 current proposals. Currently, the DVB subsystem doesn't implement those standards. -Digital TV Common functions ---------------------------- -.. kernel-doc:: drivers/media/dvb-core/dvb_math.h +.. toctree:: + :maxdepth: 1 -.. kernel-doc:: drivers/media/dvb-core/dvbdev.h - -Digital TV Ring buffer ----------------------- - -Those routines implement ring buffers used to handle digital TV data and -copy it from/to userspace. - -.. note:: - - 1) For performance reasons read and write routines don't check buffer sizes - and/or number of bytes free/available. This has to be done before these - routines are called. For example: - - .. code-block:: c - - /* write @buflen: bytes */ - free = dvb_ringbuffer_free(rbuf); - if (free >= buflen) - count = dvb_ringbuffer_write(rbuf, buffer, buflen); - else - /* do something */ - - /* read min. 1000, max. @bufsize: bytes */ - avail = dvb_ringbuffer_avail(rbuf); - if (avail >= 1000) - count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize)); - else - /* do something */ - - 2) If there is exactly one reader and one writer, there is no need - to lock read or write operations. - Two or more readers must be locked against each other. - Flushing the buffer counts as a read operation. - Resetting the buffer counts as a read and write operation. - Two or more writers must be locked against each other. - -.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h - - -Digital TV Frontend kABI ------------------------- - -Digital TV Frontend -~~~~~~~~~~~~~~~~~~~ - -The Digital TV Frontend kABI defines a driver-internal interface for -registering low-level, hardware specific driver to a hardware independent -frontend layer. It is only of interest for Digital TV device driver writers. -The header file for this API is named ``dvb_frontend.h`` and located in -``drivers/media/dvb-core``. - -Demodulator driver -^^^^^^^^^^^^^^^^^^ - -The demodulator driver is responsible to talk with the decoding part of the -hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with -tells what type of digital TV standards are supported, and points to a -series of functions that allow the DVB core to command the hardware via -the code under ``drivers/media/dvb-core/dvb_frontend.c``. - -A typical example of such struct in a driver ``foo`` is:: - - static struct dvb_frontend_ops foo_ops = { - .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, - .info = { - .name = "foo DVB-T/T2/C driver", - .caps = FE_CAN_FEC_1_2 | - FE_CAN_FEC_2_3 | - FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | - FE_CAN_FEC_7_8 | - FE_CAN_FEC_AUTO | - FE_CAN_QPSK | - FE_CAN_QAM_16 | - FE_CAN_QAM_32 | - FE_CAN_QAM_64 | - FE_CAN_QAM_128 | - FE_CAN_QAM_256 | - FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO | - FE_CAN_MUTE_TS | - FE_CAN_2G_MODULATION, - .frequency_min = 42000000, /* Hz */ - .frequency_max = 1002000000, /* Hz */ - .symbol_rate_min = 870000, - .symbol_rate_max = 11700000 - }, - .init = foo_init, - .sleep = foo_sleep, - .release = foo_release, - .set_frontend = foo_set_frontend, - .get_frontend = foo_get_frontend, - .read_status = foo_get_status_and_stats, - .tune = foo_tune, - .i2c_gate_ctrl = foo_i2c_gate_ctrl, - .get_frontend_algo = foo_get_algo, - }; - -A typical example of such struct in a driver ``bar`` meant to be used on -Satellite TV reception is:: - - static const struct dvb_frontend_ops bar_ops = { - .delsys = { SYS_DVBS, SYS_DVBS2 }, - .info = { - .name = "Bar DVB-S/S2 demodulator", - .frequency_min = 500000, /* KHz */ - .frequency_max = 2500000, /* KHz */ - .frequency_stepsize = 0, - .symbol_rate_min = 1000000, - .symbol_rate_max = 45000000, - .symbol_rate_tolerance = 500, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_AUTO | - FE_CAN_QPSK, - }, - .init = bar_init, - .sleep = bar_sleep, - .release = bar_release, - .set_frontend = bar_set_frontend, - .get_frontend = bar_get_frontend, - .read_status = bar_get_status_and_stats, - .i2c_gate_ctrl = bar_i2c_gate_ctrl, - .get_frontend_algo = bar_get_algo, - .tune = bar_tune, - - /* Satellite-specific */ - .diseqc_send_master_cmd = bar_send_diseqc_msg, - .diseqc_send_burst = bar_send_burst, - .set_tone = bar_set_tone, - .set_voltage = bar_set_voltage, - }; - -.. note:: - - #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the - frequencies are specified in kHz, while, for terrestrial and cable - standards, they're specified in Hz. Due to that, if the same frontend - supports both types, you'll need to have two separate - :c:type:`dvb_frontend_ops` structures, one for each standard. - #) The ``.i2c_gate_ctrl`` field is present only when the hardware has - allows controlling an I2C gate (either directly of via some GPIO pin), - in order to remove the tuner from the I2C bus after a channel is - tuned. - #) All new drivers should implement the - :ref:`DVBv5 statistics ` via ``.read_status``. - Yet, there are a number of callbacks meant to get statistics for - signal strength, S/N and UCB. Those are there to provide backward - compatibility with legacy applications that don't support the DVBv5 - API. Implementing those callbacks are optional. Those callbacks may be - removed in the future, after we have all existing drivers supporting - DVBv5 stats. - #) Other callbacks are required for satellite TV standards, in order to - control LNBf and DiSEqC: ``.diseqc_send_master_cmd``, - ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``. - -.. |delta| unicode:: U+00394 - -The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is -responsible for tuning the device. It supports multiple algoritms to -detect a channel, as defined at enum :c:func:`dvbfe_algo`. - -The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver -doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to -``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning, -e. g. it will try first to use the specified center frequency ``f``, -then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|, -``f`` - 2 x |delta| and so on. - -If the hardware has internally a some sort of zigzag algorithm, you should -define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``. - -.. note:: - - The core frontend support also supports - a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to - define its own hardware-assisted algorithm. Very few hardware need to - use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other - function callbacks at struct :c:type:`dvb_frontend_ops`. - -Attaching frontend driver to the bridge driver -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before using the Digital TV frontend core, the bridge driver should attach -the frontend demod, tuner and SEC devices and call -:c:func:`dvb_register_frontend()`, -in order to register the new frontend at the subsystem. At device -detach/removal, the bridge driver should call -:c:func:`dvb_unregister_frontend()` to -remove the frontend from the core and then :c:func:`dvb_frontend_detach()` -to free the memory allocated by the frontend drivers. - -The drivers should also call :c:func:`dvb_frontend_suspend()` as part of -their handler for the :c:type:`device_driver`.\ ``suspend()``, and -:c:func:`dvb_frontend_resume()` as -part of their handler for :c:type:`device_driver`.\ ``resume()``. - -A few other optional functions are provided to handle some special cases. - -.. _dvbv5_stats: - -Digital TV Frontend statistics -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Introduction -^^^^^^^^^^^^ - -Digital TV frontends provide a range of -:ref:`statistics ` meant to help tuning the device -and measuring the quality of service. - -For each statistics measurement, the driver should set the type of scale used, -or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given -time. Drivers should also provide the number of statistics for each type. -that's usually 1 for most video standards [#f2]_. - -Drivers should initialize each statistic counters with length and -scale at its init code. For example, if the frontend provides signal -strength, it should have, on its init code:: - - struct dtv_frontend_properties *c = &state->fe.dtv_property_cache; - - c->strength.len = 1; - c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; - -And, when the statistics got updated, set the scale:: - - c->strength.stat[0].scale = FE_SCALE_DECIBEL; - c->strength.stat[0].uvalue = strength; - -.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer - set of statistics. On such cases, len should be equal to 4. The first - value corresponds to the global stat; the other ones to each layer, e. g.: - - - c->cnr.stat[0] for global S/N carrier ratio, - - c->cnr.stat[1] for Layer A S/N carrier ratio, - - c->cnr.stat[2] for layer B S/N carrier ratio, - - c->cnr.stat[3] for layer C S/N carrier ratio. - -.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of - ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements. - -Groups of statistics -^^^^^^^^^^^^^^^^^^^^ - -There are several groups of statistics currently supported: - -Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`) - - Measures the signal strength level at the analog part of the tuner or - demod. - - - Typically obtained from the gain applied to the tuner and/or frontend - in order to detect the carrier. When no carrier is detected, the gain is - at the maximum value (so, strength is on its minimal). - - - As the gain is visible through the set of registers that adjust the gain, - typically, this statistics is always available [#f3]_. - - - Drivers should try to make it available all the times, as this statistics - can be used when adjusting an antenna position and to check for troubles - at the cabling. - - .. [#f3] On a few devices, the gain keeps floating if no carrier. - On such devices, strength report should check first if carrier is - detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`), - and otherwise return the lowest possible value. - -Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`) - - Signal to Noise ratio for the main carrier. - - - Signal to Noise measurement depends on the device. On some hardware, is - available when the main carrier is detected. On those hardware, CNR - measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``, - see :c:type:`fe_status`). - - On other devices, it requires inner FEC decoding, - as the frontend measures it indirectly from other parameters (e. g. after - ``FE_HAS_VITERBI``, see :c:type:`fe_status`). - - Having it available after inner FEC is more common. - -Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`) - - Those counters measure the number of bits and bit errors errors after - the forward error correction (FEC) on the inner coding block - (after Viterbi, LDPC or other inner code). - - - Due to its nature, those statistics depend on full coding lock - (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``, - see :c:type:`fe_status`). - -Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`) - - Those counters measure the number of bits and bit errors errors before - the forward error correction (FEC) on the inner coding block - (before Viterbi, LDPC or other inner code). - - - Not all frontends provide this kind of statistics. - - - Due to its nature, those statistics depend on inner coding lock (e. g. - after ``FE_HAS_VITERBI``, see :c:type:`fe_status`). - -Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`) - - Those counters measure the number of blocks and block errors errors after - the forward error correction (FEC) on the inner coding block - (before Viterbi, LDPC or other inner code). - - - Due to its nature, those statistics depend on full coding lock - (e. g. after ``FE_HAS_SYNC`` or after - ``FE_HAS_LOCK``, see :c:type:`fe_status`). - -.. note:: All counters should be monotonically increased as they're - collected from the hardware. - -A typical example of the logic that handle status and statistics is:: - - static int foo_get_status_and_stats(struct dvb_frontend *fe) - { - struct foo_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - - int rc; - enum fe_status *status; - - /* Both status and strength are always available */ - rc = foo_read_status(fe, &status); - if (rc < 0) - return rc; - - rc = foo_read_strength(fe); - if (rc < 0) - return rc; - - /* Check if CNR is available */ - if (!(fe->status & FE_HAS_CARRIER)) - return 0; - - rc = foo_read_cnr(fe); - if (rc < 0) - return rc; - - /* Check if pre-BER stats are available */ - if (!(fe->status & FE_HAS_VITERBI)) - return 0; - - rc = foo_get_pre_ber(fe); - if (rc < 0) - return rc; - - /* Check if post-BER stats are available */ - if (!(fe->status & FE_HAS_SYNC)) - return 0; - - rc = foo_get_post_ber(fe); - if (rc < 0) - return rc; - } - - static const struct dvb_frontend_ops ops = { - /* ... */ - .read_status = foo_get_status_and_stats, - }; - -Statistics collect -^^^^^^^^^^^^^^^^^^ - -On almost all frontend hardware, the bit and byte counts are stored by -the hardware after a certain amount of time or after the total bit/block -counter reaches a certain value (usually programable), for example, on -every 1000 ms or after receiving 1,000,000 bits. - -So, if you read the registers too soon, you'll end by reading the same -value as in the previous reading, causing the monotonic value to be -incremented too often. - -Drivers should take the responsibility to avoid too often reads. That -can be done using two approaches: - -if the driver have a bit that indicates when a collected data is ready -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -Driver should check such bit before making the statistics available. - -An example of such behavior can be found at this code snippet (adapted -from mb86a20s driver's logic):: - - static int foo_get_pre_ber(struct dvb_frontend *fe) - { - struct foo_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - int rc, bit_error; - - /* Check if the BER measures are already available */ - rc = foo_read_u8(state, 0x54); - if (rc < 0) - return rc; - - if (!rc) - return 0; - - /* Read Bit Error Count */ - bit_error = foo_read_u32(state, 0x55); - if (bit_error < 0) - return bit_error; - - /* Read Total Bit Count */ - rc = foo_read_u32(state, 0x51); - if (rc < 0) - return rc; - - c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_error.stat[0].uvalue += bit_error; - c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_count.stat[0].uvalue += rc; - - return 0; - } - -If the driver doesn't provide a statistics available check bit -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -A few devices, however, may not provide a way to check if the stats are -available (or the way to check it is unknown). They may not even provide -a way to directly read the total number of bits or blocks. - -On those devices, the driver need to ensure that it won't be reading from -the register too often and/or estimate the total number of bits/blocks. - -On such drivers, a typical routine to get statistics would be like -(adapted from dib8000 driver's logic):: - - struct foo_state { - /* ... */ - - unsigned long per_jiffies_stats; - } - - static int foo_get_pre_ber(struct dvb_frontend *fe) - { - struct foo_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - int rc, bit_error; - u64 bits; - - /* Check if time for stats was elapsed */ - if (!time_after(jiffies, state->per_jiffies_stats)) - return 0; - - /* Next stat should be collected in 1000 ms */ - state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000); - - /* Read Bit Error Count */ - bit_error = foo_read_u32(state, 0x55); - if (bit_error < 0) - return bit_error; - - /* - * On this particular frontend, there's no register that - * would provide the number of bits per 1000ms sample. So, - * some function would calculate it based on DTV properties - */ - bits = get_number_of_bits_per_1000ms(fe); - - c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_error.stat[0].uvalue += bit_error; - c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; - c->pre_bit_count.stat[0].uvalue += bits; - - return 0; - } - -Please notice that, on both cases, we're getting the statistics using the -:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that -the frontend core will automatically call this function periodically -(usually, 3 times per second, when the frontend is locked). - -That warrants that we won't miss to collect a counter and increment the -monotonic stats at the right time. - -Digital TV Frontend functions and types -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h - - -Digital TV Demux kABI ---------------------- - -Digital TV Demux -~~~~~~~~~~~~~~~~ - -The Kernel Digital TV Demux kABI defines a driver-internal interface for -registering low-level, hardware specific driver to a hardware independent -demux layer. It is only of interest for Digital TV device driver writers. -The header file for this kABI is named demux.h and located in -drivers/media/dvb-core. - -The demux kABI should be implemented for each demux in the system. It is -used to select the TS source of a demux and to manage the demux resources. -When the demux client allocates a resource via the demux kABI, it receives -a pointer to the kABI of that resource. - -Each demux receives its TS input from a DVB front-end or from memory, as -set via this demux kABI. In a system with more than one front-end, the kABI -can be used to select one of the DVB front-ends as a TS source for a demux, -unless this is fixed in the HW platform. - -The demux kABI only controls front-ends regarding to their connections with -demuxes; the kABI used to set the other front-end parameters, such as -tuning, are devined via the Digital TV Frontend kABI. - -The functions that implement the abstract interface demux should be defined -static or module private and registered to the Demux core for external -access. It is not necessary to implement every function in the struct -&dmx_demux. For example, a demux interface might support Section filtering, -but not PES filtering. The kABI client is expected to check the value of any -function pointer before calling the function: the value of ``NULL`` means -that the function is not available. - -Whenever the functions of the demux API modify shared data, the -possibilities of lost update and race condition problems should be -addressed, e.g. by protecting parts of code with mutexes. - -Note that functions called from a bottom half context must not sleep. -Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a -kernel thread being put to sleep if swapping is needed. For example, the -Linux Kernel calls the functions of a network device interface from a -bottom half context. Thus, if a demux kABI function is called from network -device code, the function must not sleep. - - - -Demux Callback API ------------------- - -Demux Callback -~~~~~~~~~~~~~~ - -This kernel-space API comprises the callback functions that deliver filtered -data to the demux client. Unlike the other DVB kABIs, these functions are -provided by the client and called from the demux code. - -The function pointers of this abstract interface are not packed into a -structure as in the other demux APIs, because the callback functions are -registered and used independent of each other. As an example, it is possible -for the API client to provide several callback functions for receiving TS -packets and no callbacks for PES packets or sections. - -The functions that implement the callback API need not be re-entrant: when -a demux driver calls one of these functions, the driver is not allowed to -call the function again before the original call returns. If a callback is -triggered by a hardware interrupt, it is recommended to use the Linux -bottom half mechanism or start a tasklet instead of making the callback -function call directly from a hardware interrupt. - -This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()` -callbacks. - -.. kernel-doc:: drivers/media/dvb-core/demux.h - -Digital TV Conditional Access kABI ----------------------------------- - -.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h + dtv-common + dtv-frontend + dtv-demux + dtv-ca + dtv-net diff --git a/Documentation/media/kapi/dtv-demux.rst b/Documentation/media/kapi/dtv-demux.rst new file mode 100644 index 0000000000000000000000000000000000000000..7aa865a2b43f7cb25a62c46e554be5f75f34f118 --- /dev/null +++ b/Documentation/media/kapi/dtv-demux.rst @@ -0,0 +1,82 @@ +Digital TV Demux kABI +--------------------- + +Digital TV Demux +~~~~~~~~~~~~~~~~ + +The Kernel Digital TV Demux kABI defines a driver-internal interface for +registering low-level, hardware specific driver to a hardware independent +demux layer. It is only of interest for Digital TV device driver writers. +The header file for this kABI is named ``demux.h`` and located in +``drivers/media/dvb-core``. + +The demux kABI should be implemented for each demux in the system. It is +used to select the TS source of a demux and to manage the demux resources. +When the demux client allocates a resource via the demux kABI, it receives +a pointer to the kABI of that resource. + +Each demux receives its TS input from a DVB front-end or from memory, as +set via this demux kABI. In a system with more than one front-end, the kABI +can be used to select one of the DVB front-ends as a TS source for a demux, +unless this is fixed in the HW platform. + +The demux kABI only controls front-ends regarding to their connections with +demuxes; the kABI used to set the other front-end parameters, such as +tuning, are devined via the Digital TV Frontend kABI. + +The functions that implement the abstract interface demux should be defined +static or module private and registered to the Demux core for external +access. It is not necessary to implement every function in the struct +:c:type:`dmx_demux`. For example, a demux interface might support Section filtering, +but not PES filtering. The kABI client is expected to check the value of any +function pointer before calling the function: the value of ``NULL`` means +that the function is not available. + +Whenever the functions of the demux API modify shared data, the +possibilities of lost update and race condition problems should be +addressed, e.g. by protecting parts of code with mutexes. + +Note that functions called from a bottom half context must not sleep. +Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a +kernel thread being put to sleep if swapping is needed. For example, the +Linux Kernel calls the functions of a network device interface from a +bottom half context. Thus, if a demux kABI function is called from network +device code, the function must not sleep. + +Demux Callback API +~~~~~~~~~~~~~~~~~~ + +This kernel-space API comprises the callback functions that deliver filtered +data to the demux client. Unlike the other DVB kABIs, these functions are +provided by the client and called from the demux code. + +The function pointers of this abstract interface are not packed into a +structure as in the other demux APIs, because the callback functions are +registered and used independent of each other. As an example, it is possible +for the API client to provide several callback functions for receiving TS +packets and no callbacks for PES packets or sections. + +The functions that implement the callback API need not be re-entrant: when +a demux driver calls one of these functions, the driver is not allowed to +call the function again before the original call returns. If a callback is +triggered by a hardware interrupt, it is recommended to use the Linux +bottom half mechanism or start a tasklet instead of making the callback +function call directly from a hardware interrupt. + +This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()` +callbacks. + +Digital TV Demux device registration functions and data structures +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/dmxdev.h + +High-level Digital TV demux interface +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/dvb_demux.h + +Driver-internal low-level hardware specific driver demux interface +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/demux.h diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst new file mode 100644 index 0000000000000000000000000000000000000000..f1a2fdaab5ba14f172996efa8fafb959ad29bb9c --- /dev/null +++ b/Documentation/media/kapi/dtv-frontend.rst @@ -0,0 +1,443 @@ +Digital TV Frontend kABI +------------------------ + +Digital TV Frontend +~~~~~~~~~~~~~~~~~~~ + +The Digital TV Frontend kABI defines a driver-internal interface for +registering low-level, hardware specific driver to a hardware independent +frontend layer. It is only of interest for Digital TV device driver writers. +The header file for this API is named ``dvb_frontend.h`` and located in +``drivers/media/dvb-core``. + +Demodulator driver +^^^^^^^^^^^^^^^^^^ + +The demodulator driver is responsible to talk with the decoding part of the +hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with +tells what type of digital TV standards are supported, and points to a +series of functions that allow the DVB core to command the hardware via +the code under ``drivers/media/dvb-core/dvb_frontend.c``. + +A typical example of such struct in a driver ``foo`` is:: + + static struct dvb_frontend_ops foo_ops = { + .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, + .info = { + .name = "foo DVB-T/T2/C driver", + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_32 | + FE_CAN_QAM_64 | + FE_CAN_QAM_128 | + FE_CAN_QAM_256 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_MUTE_TS | + FE_CAN_2G_MODULATION, + .frequency_min = 42000000, /* Hz */ + .frequency_max = 1002000000, /* Hz */ + .symbol_rate_min = 870000, + .symbol_rate_max = 11700000 + }, + .init = foo_init, + .sleep = foo_sleep, + .release = foo_release, + .set_frontend = foo_set_frontend, + .get_frontend = foo_get_frontend, + .read_status = foo_get_status_and_stats, + .tune = foo_tune, + .i2c_gate_ctrl = foo_i2c_gate_ctrl, + .get_frontend_algo = foo_get_algo, + }; + +A typical example of such struct in a driver ``bar`` meant to be used on +Satellite TV reception is:: + + static const struct dvb_frontend_ops bar_ops = { + .delsys = { SYS_DVBS, SYS_DVBS2 }, + .info = { + .name = "Bar DVB-S/S2 demodulator", + .frequency_min = 500000, /* KHz */ + .frequency_max = 2500000, /* KHz */ + .frequency_stepsize = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK, + }, + .init = bar_init, + .sleep = bar_sleep, + .release = bar_release, + .set_frontend = bar_set_frontend, + .get_frontend = bar_get_frontend, + .read_status = bar_get_status_and_stats, + .i2c_gate_ctrl = bar_i2c_gate_ctrl, + .get_frontend_algo = bar_get_algo, + .tune = bar_tune, + + /* Satellite-specific */ + .diseqc_send_master_cmd = bar_send_diseqc_msg, + .diseqc_send_burst = bar_send_burst, + .set_tone = bar_set_tone, + .set_voltage = bar_set_voltage, + }; + +.. note:: + + #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the + frequencies are specified in kHz, while, for terrestrial and cable + standards, they're specified in Hz. Due to that, if the same frontend + supports both types, you'll need to have two separate + :c:type:`dvb_frontend_ops` structures, one for each standard. + #) The ``.i2c_gate_ctrl`` field is present only when the hardware has + allows controlling an I2C gate (either directly of via some GPIO pin), + in order to remove the tuner from the I2C bus after a channel is + tuned. + #) All new drivers should implement the + :ref:`DVBv5 statistics ` via ``.read_status``. + Yet, there are a number of callbacks meant to get statistics for + signal strength, S/N and UCB. Those are there to provide backward + compatibility with legacy applications that don't support the DVBv5 + API. Implementing those callbacks are optional. Those callbacks may be + removed in the future, after we have all existing drivers supporting + DVBv5 stats. + #) Other callbacks are required for satellite TV standards, in order to + control LNBf and DiSEqC: ``.diseqc_send_master_cmd``, + ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``. + +.. |delta| unicode:: U+00394 + +The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is +responsible for tuning the device. It supports multiple algorithms to +detect a channel, as defined at enum :c:func:`dvbfe_algo`. + +The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver +doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to +``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning, +e. g. it will try first to use the specified center frequency ``f``, +then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|, +``f`` - 2 x |delta| and so on. + +If the hardware has internally a some sort of zigzag algorithm, you should +define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``. + +.. note:: + + The core frontend support also supports + a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to + define its own hardware-assisted algorithm. Very few hardware need to + use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other + function callbacks at struct :c:type:`dvb_frontend_ops`. + +Attaching frontend driver to the bridge driver +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Before using the Digital TV frontend core, the bridge driver should attach +the frontend demod, tuner and SEC devices and call +:c:func:`dvb_register_frontend()`, +in order to register the new frontend at the subsystem. At device +detach/removal, the bridge driver should call +:c:func:`dvb_unregister_frontend()` to +remove the frontend from the core and then :c:func:`dvb_frontend_detach()` +to free the memory allocated by the frontend drivers. + +The drivers should also call :c:func:`dvb_frontend_suspend()` as part of +their handler for the :c:type:`device_driver`.\ ``suspend()``, and +:c:func:`dvb_frontend_resume()` as +part of their handler for :c:type:`device_driver`.\ ``resume()``. + +A few other optional functions are provided to handle some special cases. + +.. _dvbv5_stats: + +Digital TV Frontend statistics +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Introduction +^^^^^^^^^^^^ + +Digital TV frontends provide a range of +:ref:`statistics ` meant to help tuning the device +and measuring the quality of service. + +For each statistics measurement, the driver should set the type of scale used, +or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given +time. Drivers should also provide the number of statistics for each type. +that's usually 1 for most video standards [#f2]_. + +Drivers should initialize each statistic counters with length and +scale at its init code. For example, if the frontend provides signal +strength, it should have, on its init code:: + + struct dtv_frontend_properties *c = &state->fe.dtv_property_cache; + + c->strength.len = 1; + c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + +And, when the statistics got updated, set the scale:: + + c->strength.stat[0].scale = FE_SCALE_DECIBEL; + c->strength.stat[0].uvalue = strength; + +.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer + set of statistics. On such cases, len should be equal to 4. The first + value corresponds to the global stat; the other ones to each layer, e. g.: + + - c->cnr.stat[0] for global S/N carrier ratio, + - c->cnr.stat[1] for Layer A S/N carrier ratio, + - c->cnr.stat[2] for layer B S/N carrier ratio, + - c->cnr.stat[3] for layer C S/N carrier ratio. + +.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of + ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements. + +Groups of statistics +^^^^^^^^^^^^^^^^^^^^ + +There are several groups of statistics currently supported: + +Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`) + - Measures the signal strength level at the analog part of the tuner or + demod. + + - Typically obtained from the gain applied to the tuner and/or frontend + in order to detect the carrier. When no carrier is detected, the gain is + at the maximum value (so, strength is on its minimal). + + - As the gain is visible through the set of registers that adjust the gain, + typically, this statistics is always available [#f3]_. + + - Drivers should try to make it available all the times, as this statistics + can be used when adjusting an antenna position and to check for troubles + at the cabling. + + .. [#f3] On a few devices, the gain keeps floating if no carrier. + On such devices, strength report should check first if carrier is + detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`), + and otherwise return the lowest possible value. + +Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`) + - Signal to Noise ratio for the main carrier. + + - Signal to Noise measurement depends on the device. On some hardware, is + available when the main carrier is detected. On those hardware, CNR + measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``, + see :c:type:`fe_status`). + + On other devices, it requires inner FEC decoding, + as the frontend measures it indirectly from other parameters (e. g. after + ``FE_HAS_VITERBI``, see :c:type:`fe_status`). + + Having it available after inner FEC is more common. + +Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`) + - Those counters measure the number of bits and bit errors errors after + the forward error correction (FEC) on the inner coding block + (after Viterbi, LDPC or other inner code). + + - Due to its nature, those statistics depend on full coding lock + (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``, + see :c:type:`fe_status`). + +Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`) + - Those counters measure the number of bits and bit errors errors before + the forward error correction (FEC) on the inner coding block + (before Viterbi, LDPC or other inner code). + + - Not all frontends provide this kind of statistics. + + - Due to its nature, those statistics depend on inner coding lock (e. g. + after ``FE_HAS_VITERBI``, see :c:type:`fe_status`). + +Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`) + - Those counters measure the number of blocks and block errors errors after + the forward error correction (FEC) on the inner coding block + (before Viterbi, LDPC or other inner code). + + - Due to its nature, those statistics depend on full coding lock + (e. g. after ``FE_HAS_SYNC`` or after + ``FE_HAS_LOCK``, see :c:type:`fe_status`). + +.. note:: All counters should be monotonically increased as they're + collected from the hardware. + +A typical example of the logic that handle status and statistics is:: + + static int foo_get_status_and_stats(struct dvb_frontend *fe) + { + struct foo_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + int rc; + enum fe_status *status; + + /* Both status and strength are always available */ + rc = foo_read_status(fe, &status); + if (rc < 0) + return rc; + + rc = foo_read_strength(fe); + if (rc < 0) + return rc; + + /* Check if CNR is available */ + if (!(fe->status & FE_HAS_CARRIER)) + return 0; + + rc = foo_read_cnr(fe); + if (rc < 0) + return rc; + + /* Check if pre-BER stats are available */ + if (!(fe->status & FE_HAS_VITERBI)) + return 0; + + rc = foo_get_pre_ber(fe); + if (rc < 0) + return rc; + + /* Check if post-BER stats are available */ + if (!(fe->status & FE_HAS_SYNC)) + return 0; + + rc = foo_get_post_ber(fe); + if (rc < 0) + return rc; + } + + static const struct dvb_frontend_ops ops = { + /* ... */ + .read_status = foo_get_status_and_stats, + }; + +Statistics collect +^^^^^^^^^^^^^^^^^^ + +On almost all frontend hardware, the bit and byte counts are stored by +the hardware after a certain amount of time or after the total bit/block +counter reaches a certain value (usually programable), for example, on +every 1000 ms or after receiving 1,000,000 bits. + +So, if you read the registers too soon, you'll end by reading the same +value as in the previous reading, causing the monotonic value to be +incremented too often. + +Drivers should take the responsibility to avoid too often reads. That +can be done using two approaches: + +if the driver have a bit that indicates when a collected data is ready +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +Driver should check such bit before making the statistics available. + +An example of such behavior can be found at this code snippet (adapted +from mb86a20s driver's logic):: + + static int foo_get_pre_ber(struct dvb_frontend *fe) + { + struct foo_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, bit_error; + + /* Check if the BER measures are already available */ + rc = foo_read_u8(state, 0x54); + if (rc < 0) + return rc; + + if (!rc) + return 0; + + /* Read Bit Error Count */ + bit_error = foo_read_u32(state, 0x55); + if (bit_error < 0) + return bit_error; + + /* Read Total Bit Count */ + rc = foo_read_u32(state, 0x51); + if (rc < 0) + return rc; + + c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[0].uvalue += bit_error; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[0].uvalue += rc; + + return 0; + } + +If the driver doesn't provide a statistics available check bit +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +A few devices, however, may not provide a way to check if the stats are +available (or the way to check it is unknown). They may not even provide +a way to directly read the total number of bits or blocks. + +On those devices, the driver need to ensure that it won't be reading from +the register too often and/or estimate the total number of bits/blocks. + +On such drivers, a typical routine to get statistics would be like +(adapted from dib8000 driver's logic):: + + struct foo_state { + /* ... */ + + unsigned long per_jiffies_stats; + } + + static int foo_get_pre_ber(struct dvb_frontend *fe) + { + struct foo_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, bit_error; + u64 bits; + + /* Check if time for stats was elapsed */ + if (!time_after(jiffies, state->per_jiffies_stats)) + return 0; + + /* Next stat should be collected in 1000 ms */ + state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000); + + /* Read Bit Error Count */ + bit_error = foo_read_u32(state, 0x55); + if (bit_error < 0) + return bit_error; + + /* + * On this particular frontend, there's no register that + * would provide the number of bits per 1000ms sample. So, + * some function would calculate it based on DTV properties + */ + bits = get_number_of_bits_per_1000ms(fe); + + c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_error.stat[0].uvalue += bit_error; + c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->pre_bit_count.stat[0].uvalue += bits; + + return 0; + } + +Please notice that, on both cases, we're getting the statistics using the +:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that +the frontend core will automatically call this function periodically +(usually, 3 times per second, when the frontend is locked). + +That warrants that we won't miss to collect a counter and increment the +monotonic stats at the right time. + +Digital TV Frontend functions and types +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h diff --git a/Documentation/media/kapi/dtv-net.rst b/Documentation/media/kapi/dtv-net.rst new file mode 100644 index 0000000000000000000000000000000000000000..ced991b73d699d265619d891738da3b7a5f7c5d4 --- /dev/null +++ b/Documentation/media/kapi/dtv-net.rst @@ -0,0 +1,4 @@ +Digital TV Network kABI +----------------------- + +.. kernel-doc:: drivers/media/dvb-core/dvb_net.h diff --git a/Documentation/media/kapi/v4l2-async.rst b/Documentation/media/kapi/v4l2-async.rst new file mode 100644 index 0000000000000000000000000000000000000000..523ff9eb09a065aa0fc39d2a8a5c27310664116f --- /dev/null +++ b/Documentation/media/kapi/v4l2-async.rst @@ -0,0 +1,3 @@ +V4L2 async kAPI +^^^^^^^^^^^^^^^ +.. kernel-doc:: include/media/v4l2-async.h diff --git a/Documentation/media/kapi/v4l2-core.rst b/Documentation/media/kapi/v4l2-core.rst index c7434f38fd9c7763aa92c5fc1e9ffaf7466f39b2..5cf292037a48a01924bffb791545d733a525fde8 100644 --- a/Documentation/media/kapi/v4l2-core.rst +++ b/Documentation/media/kapi/v4l2-core.rst @@ -19,6 +19,7 @@ Video4Linux devices v4l2-mc v4l2-mediabus v4l2-mem2mem + v4l2-async v4l2-fwnode v4l2-rect v4l2-tuner diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index a5c821809cc6c9ad4e92b143b499681db1d9b1f4..b6fd86424fbba3f03f26cc33b746682af5fc2d30 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -161,6 +161,24 @@ it is guaranteed that the state did change in between the two events. - Generated if the CEC pin goes from a low voltage to a high voltage. Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` capability set. + * .. _`CEC-EVENT-PIN-HPD-LOW`: + + - ``CEC_EVENT_PIN_HPD_LOW`` + - 5 + - Generated if the HPD pin goes from a high voltage to a low voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the HPD pin can be read and + if the HPD is low, then an initial event will be generated for that + filehandle. + * .. _`CEC-EVENT-PIN-HPD-HIGH`: + + - ``CEC_EVENT_PIN_HPD_HIGH`` + - 6 + - Generated if the HPD pin goes from a low voltage to a high voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the HPD pin can be read and + if the HPD is high, then an initial event will be generated for that + filehandle. .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| @@ -172,9 +190,9 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 3 1 8 - * .. _`CEC-EVENT-FL-INITIAL-VALUE`: + * .. _`CEC-EVENT-FL-INITIAL-STATE`: - - ``CEC_EVENT_FL_INITIAL_VALUE`` + - ``CEC_EVENT_FL_INITIAL_STATE`` - 1 - Set for the initial events that are generated when the device is opened. See the table above for which events do this. This allows diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index 0f397c535a4cde648d5e2e132d25021457cb1418..bdad4b197bcd457196a83800246ae10f8087eb7e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -131,7 +131,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - ``tx_status`` - The status bits of the transmitted message. See :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. + this message was received, not transmitted. * - __u8 - ``msg[16]`` - The message payload. For :ref:`ioctl CEC_TRANSMIT ` this is filled in by the @@ -168,7 +168,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - ``tx_status`` - The status bits of the transmitted message. See :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. + this message was received, not transmitted. * - __u8 - ``tx_arb_lost_cnt`` - A counter of the number of transmit attempts that resulted in the @@ -256,9 +256,9 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - ``CEC_TX_STATUS_ERROR`` - 0x10 - Some error occurred. This is used for any errors that do not fit - the previous two, either because the hardware could not tell which - error occurred, or because the hardware tested for other - conditions besides those two. + ``CEC_TX_STATUS_ARB_LOST`` or ``CEC_TX_STATUS_LOW_DRIVE``, either because + the hardware could not tell which error occurred, or because the hardware + tested for other conditions besides those two. * .. _`CEC-TX-STATUS-MAX-RETRIES`: - ``CEC_TX_STATUS_MAX_RETRIES`` diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst index e0f627ca2e4dd73c3dfe4b3922749e763cda5d06..16dd90fa9e94eae3b1aae295171da99ee8d0f503 100644 --- a/Documentation/media/uapi/dvb/examples.rst +++ b/Documentation/media/uapi/dvb/examples.rst @@ -6,377 +6,11 @@ Examples ******** -In this section we would like to present some examples for using the Digital -TV API. +In the past, we used to have a set of examples here. However, those +examples got out of date and doesn't even compile nowadays. -.. note:: +Also, nowadays, the best is to use the libdvbv5 DVB API nowadays, +with is fully documented. - This section is out of date, and the code below won't even - compile. Please refer to the - `libdvbv5 `__ for - updated/recommended examples. - - -.. _tuning: - -Example: Tuning -=============== - -We will start with a generic tuning subroutine that uses the frontend -and SEC, as well as the demux devices. The example is given for QPSK -tuners, but can easily be adjusted for QAM. - - -.. code-block:: c - - #include - #include - #include - #include - #include - #include - #include - #include - - #include - #include - #include - #include - - #define DMX "/dev/dvb/adapter0/demux1" - #define FRONT "/dev/dvb/adapter0/frontend1" - #define SEC "/dev/dvb/adapter0/sec1" - - /* routine for checking if we have a signal and other status information*/ - int FEReadStatus(int fd, fe_status_t *stat) - { - int ans; - - if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){ - perror("FE READ STATUS: "); - return -1; - } - - if (*stat & FE_HAS_POWER) - printf("FE HAS POWER\\n"); - - if (*stat & FE_HAS_SIGNAL) - printf("FE HAS SIGNAL\\n"); - - if (*stat & FE_SPECTRUM_INV) - printf("SPEKTRUM INV\\n"); - - return 0; - } - - - /* tune qpsk */ - /* freq: frequency of transponder */ - /* vpid, apid, tpid: PIDs of video, audio and teletext TS packets */ - /* diseqc: DiSEqC address of the used LNB */ - /* pol: Polarisation */ - /* srate: Symbol Rate */ - /* fec. FEC */ - /* lnb_lof1: local frequency of lower LNB band */ - /* lnb_lof2: local frequency of upper LNB band */ - /* lnb_slof: switch frequency of LNB */ - - int set_qpsk_channel(int freq, int vpid, int apid, int tpid, - int diseqc, int pol, int srate, int fec, int lnb_lof1, - int lnb_lof2, int lnb_slof) - { - struct secCommand scmd; - struct secCmdSequence scmds; - struct dmx_pes_filter_params pesFilterParams; - FrontendParameters frp; - struct pollfd pfd[1]; - FrontendEvent event; - int demux1, demux2, demux3, front; - - frequency = (uint32_t) freq; - symbolrate = (uint32_t) srate; - - if((front = open(FRONT,O_RDWR)) < 0){ - perror("FRONTEND DEVICE: "); - return -1; - } - - if((sec = open(SEC,O_RDWR)) < 0){ - perror("SEC DEVICE: "); - return -1; - } - - if (demux1 < 0){ - if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (demux2 < 0){ - if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (demux3 < 0){ - if ((demux3=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (freq < lnb_slof) { - frp.Frequency = (freq - lnb_lof1); - scmds.continuousTone = SEC_TONE_OFF; - } else { - frp.Frequency = (freq - lnb_lof2); - scmds.continuousTone = SEC_TONE_ON; - } - frp.Inversion = INVERSION_AUTO; - if (pol) scmds.voltage = SEC_VOLTAGE_18; - else scmds.voltage = SEC_VOLTAGE_13; - - scmd.type=0; - scmd.u.diseqc.addr=0x10; - scmd.u.diseqc.cmd=0x38; - scmd.u.diseqc.numParams=1; - scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) | - (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) | - (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0); - - scmds.miniCommand=SEC_MINI_NONE; - scmds.numCommands=1; - scmds.commands=&scmd; - if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ - perror("SEC SEND: "); - return -1; - } - - if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ - perror("SEC SEND: "); - return -1; - } - - frp.u.qpsk.SymbolRate = srate; - frp.u.qpsk.FEC_inner = fec; - - if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){ - perror("QPSK TUNE: "); - return -1; - } - - pfd[0].fd = front; - pfd[0].events = POLLIN; - - if (poll(pfd,1,3000)){ - if (pfd[0].revents & POLLIN){ - printf("Getting QPSK event\\n"); - if ( ioctl(front, FE_GET_EVENT, &event) - - == -EOVERFLOW){ - perror("qpsk get event"); - return -1; - } - printf("Received "); - switch(event.type){ - case FE_UNEXPECTED_EV: - printf("unexpected event\\n"); - return -1; - case FE_FAILURE_EV: - printf("failure event\\n"); - return -1; - - case FE_COMPLETION_EV: - printf("completion event\\n"); - } - } - } - - - pesFilterParams.pid = vpid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_DECODER; - pesFilterParams.pes_type = DMX_PES_VIDEO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("set_vpid"); - return -1; - } - - pesFilterParams.pid = apid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_DECODER; - pesFilterParams.pes_type = DMX_PES_AUDIO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("set_apid"); - return -1; - } - - pesFilterParams.pid = tpid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_DECODER; - pesFilterParams.pes_type = DMX_PES_TELETEXT; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("set_tpid"); - return -1; - } - - return has_signal(fds); - } - -The program assumes that you are using a universal LNB and a standard -DiSEqC switch with up to 4 addresses. Of course, you could build in some -more checking if tuning was successful and maybe try to repeat the -tuning process. Depending on the external hardware, i.e. LNB and DiSEqC -switch, and weather conditions this may be necessary. - - -.. _the_dvr_device: - -Example: The DVR device -======================== - -The following program code shows how to use the DVR device for -recording. - - -.. code-block:: c - - #include - #include - #include - #include - #include - #include - #include - #include - - #include - #include - #include - #define DVR "/dev/dvb/adapter0/dvr1" - #define AUDIO "/dev/dvb/adapter0/audio1" - #define VIDEO "/dev/dvb/adapter0/video1" - - #define BUFFY (188*20) - #define MAX_LENGTH (1024*1024*5) /* record 5MB */ - - - /* switch the demuxes to recording, assuming the transponder is tuned */ - - /* demux1, demux2: file descriptor of video and audio filters */ - /* vpid, apid: PIDs of video and audio channels */ - - int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid) - { - struct dmx_pes_filter_params pesFilterParams; - - if (demux1 < 0){ - if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - if (demux2 < 0){ - if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) - < 0){ - perror("DEMUX DEVICE: "); - return -1; - } - } - - pesFilterParams.pid = vpid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_TS_TAP; - pesFilterParams.pes_type = DMX_PES_VIDEO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("DEMUX DEVICE"); - return -1; - } - pesFilterParams.pid = apid; - pesFilterParams.input = DMX_IN_FRONTEND; - pesFilterParams.output = DMX_OUT_TS_TAP; - pesFilterParams.pes_type = DMX_PES_AUDIO; - pesFilterParams.flags = DMX_IMMEDIATE_START; - if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ - perror("DEMUX DEVICE"); - return -1; - } - return 0; - } - - /* start recording MAX_LENGTH , assuming the transponder is tuned */ - - /* demux1, demux2: file descriptor of video and audio filters */ - /* vpid, apid: PIDs of video and audio channels */ - int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid) - { - int i; - int len; - int written; - uint8_t buf[BUFFY]; - uint64_t length; - struct pollfd pfd[1]; - int dvr, dvr_out; - - /* open dvr device */ - if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){ - perror("DVR DEVICE"); - return -1; - } - - /* switch video and audio demuxes to dvr */ - printf ("Switching dvr on\\n"); - i = switch_to_record(demux1, demux2, vpid, apid); - printf("finished: "); - - printf("Recording %2.0f MB of test file in TS format\\n", - MAX_LENGTH/(1024.0*1024.0)); - length = 0; - - /* open output file */ - if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT - |O_TRUNC, S_IRUSR|S_IWUSR - |S_IRGRP|S_IWGRP|S_IROTH| - S_IWOTH)) < 0){ - perror("Can't open file for dvr test"); - return -1; - } - - pfd[0].fd = dvr; - pfd[0].events = POLLIN; - - /* poll for dvr data and write to file */ - while (length < MAX_LENGTH ) { - if (poll(pfd,1,1)){ - if (pfd[0].revents & POLLIN){ - len = read(dvr, buf, BUFFY); - if (len < 0){ - perror("recording"); - return -1; - } - if (len > 0){ - written = 0; - while (written < len) - written += - write (dvr_out, - buf, len); - length += len; - printf("written %2.0f MB\\r", - length/1024./1024.); - } - } - } - } - return 0; - } +Please refer to the `libdvbv5 `__ +for updated/recommended examples. diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst index 948d2ba84f2ce0991231f90f2529979802cbc974..b69741d9cedfc30adaa9af94aaaed01adfddcc41 100644 --- a/Documentation/media/uapi/dvb/fe-get-property.rst +++ b/Documentation/media/uapi/dvb/fe-get-property.rst @@ -48,8 +48,11 @@ depends on the delivery system and on the device: - This call requires read/write access to the device. - - At return, the values are updated to reflect the actual parameters - used. +.. note:: + + At return, the values aren't updated to reflect the actual + parameters used. If the actual parameters are needed, an explicit + call to ``FE_GET_PROPERTY`` is needed. - ``FE_GET_PROPERTY:`` diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst index e1177bdcd623be66c8951337be9eacf9040947ad..8fa3292eaa42596d45280d187ea3e9ded4508e25 100644 --- a/Documentation/media/uapi/dvb/net-types.rst +++ b/Documentation/media/uapi/dvb/net-types.rst @@ -1,6 +1,6 @@ .. -*- coding: utf-8; mode: rst -*- -.. _dmx_types: +.. _net_types: ************** Net Data Types diff --git a/Documentation/networking/dsa/lan9303.txt b/Documentation/networking/dsa/lan9303.txt new file mode 100644 index 0000000000000000000000000000000000000000..144b02b95207eeac5590f949447e9f8b5812edf5 --- /dev/null +++ b/Documentation/networking/dsa/lan9303.txt @@ -0,0 +1,37 @@ +LAN9303 Ethernet switch driver +============================== + +The LAN9303 is a three port 10/100 Mbps ethernet switch with integrated phys for +the two external ethernet ports. The third port is an RMII/MII interface to a +host master network interface (e.g. fixed link). + + +Driver details +============== + +The driver is implemented as a DSA driver, see +Documentation/networking/dsa/dsa.txt. + +See Documentation/devicetree/bindings/net/dsa/lan9303.txt for device tree +binding. + +The LAN9303 can be managed both via MDIO and I2C, both supported by this driver. + +At startup the driver configures the device to provide two separate network +interfaces (which is the default state of a DSA device). Due to HW limitations, +no HW MAC learning takes place in this mode. + +When both user ports are joined to the same bridge, the normal HW MAC learning +is enabled. This means that unicast traffic is forwarded in HW. Broadcast and +multicast is flooded in HW. STP is also supported in this mode. The driver +support fdb/mdb operations as well, meaning IGMP snooping is supported. + +If one of the user ports leave the bridge, the ports goes back to the initial +separated operation. + + +Driver limitations +================== + + - Support for VLAN filtering is not implemented + - The HW does not support VLAN-specific fdb entries diff --git a/Documentation/networking/gtp.txt b/Documentation/networking/gtp.txt index 93e96750f1034bfc3cb804a78033ad9836dc5d89..0d9c18f05ec61d8d6abe4745e15477230e46cbb4 100644 --- a/Documentation/networking/gtp.txt +++ b/Documentation/networking/gtp.txt @@ -1,6 +1,7 @@ The Linux kernel GTP tunneling module ====================================================================== -Documentation by Harald Welte +Documentation by Harald Welte and + Andreas Schultz In 'drivers/net/gtp.c' you are finding a kernel-level implementation of a GTP tunnel endpoint. @@ -91,9 +92,13 @@ http://git.osmocom.org/libgtpnl/ == Protocol Versions == -There are two different versions of GTP-U: v0 and v1. Both are -implemented in the Kernel GTP module. Version 0 is a legacy version, -and deprecated from recent 3GPP specifications. +There are two different versions of GTP-U: v0 [GSM TS 09.60] and v1 +[3GPP TS 29.281]. Both are implemented in the Kernel GTP module. +Version 0 is a legacy version, and deprecated from recent 3GPP +specifications. + +GTP-U uses UDP for transporting PDUs. The receiving UDP port is 2151 +for GTPv1-U and 3386 for GTPv0-U. There are three versions of GTP-C: v0, v1, and v2. As the kernel doesn't implement GTP-C, we don't have to worry about this. It's the @@ -133,3 +138,93 @@ doe to a lack of user interest, it never got merged. In 2015, Andreas Schultz came to the rescue and fixed lots more bugs, extended it with new features and finally pushed all of us to get it mainline, where it was merged in 4.7.0. + +== Architectural Details == + +=== Local GTP-U entity and tunnel identification === + +GTP-U uses UDP for transporting PDU's. The receiving UDP port is 2152 +for GTPv1-U and 3386 for GTPv0-U. + +There is only one GTP-U entity (and therefor SGSN/GGSN/S-GW/PDN-GW +instance) per IP address. Tunnel Endpoint Identifier (TEID) are unique +per GTP-U entity. + +A specific tunnel is only defined by the destination entity. Since the +destination port is constant, only the destination IP and TEID define +a tunnel. The source IP and Port have no meaning for the tunnel. + +Therefore: + + * when sending, the remote entity is defined by the remote IP and + the tunnel endpoint id. The source IP and port have no meaning and + can be changed at any time. + + * when receiving the local entity is defined by the local + destination IP and the tunnel endpoint id. The source IP and port + have no meaning and can change at any time. + +[3GPP TS 29.281] Section 4.3.0 defines this so: + +> The TEID in the GTP-U header is used to de-multiplex traffic +> incoming from remote tunnel endpoints so that it is delivered to the +> User plane entities in a way that allows multiplexing of different +> users, different packet protocols and different QoS levels. +> Therefore no two remote GTP-U endpoints shall send traffic to a +> GTP-U protocol entity using the same TEID value except +> for data forwarding as part of mobility procedures. + +The definition above only defines that two remote GTP-U endpoints +*should not* send to the same TEID, it *does not* forbid or exclude +such a scenario. In fact, the mentioned mobility procedures make it +necessary that the GTP-U entity accepts traffic for TEIDs from +multiple or unknown peers. + +Therefore, the receiving side identifies tunnels exclusively based on +TEIDs, not based on the source IP! + +== APN vs. Network Device == + +The GTP-U driver creates a Linux network device for each Gi/SGi +interface. + +[3GPP TS 29.281] calls the Gi/SGi reference point an interface. This +may lead to the impression that the GGSN/P-GW can have only one such +interface. + +Correct is that the Gi/SGi reference point defines the interworking +between +the 3GPP packet domain (PDN) based on GTP-U tunnel and IP +based networks. + +There is no provision in any of the 3GPP documents that limits the +number of Gi/SGi interfaces implemented by a GGSN/P-GW. + +[3GPP TS 29.061] Section 11.3 makes it clear that the selection of a +specific Gi/SGi interfaces is made through the Access Point Name +(APN): + +> 2. each private network manages its own addressing. In general this +> will result in different private networks having overlapping +> address ranges. A logically separate connection (e.g. an IP in IP +> tunnel or layer 2 virtual circuit) is used between the GGSN/P-GW +> and each private network. +> +> In this case the IP address alone is not necessarily unique. The +> pair of values, Access Point Name (APN) and IPv4 address and/or +> IPv6 prefixes, is unique. + +In order to support the overlapping address range use case, each APN +is mapped to a separate Gi/SGi interface (network device). + +NOTE: The Access Point Name is purely a control plane (GTP-C) concept. +At the GTP-U level, only Tunnel Endpoint Identifiers are present in +GTP-U packets and network devices are known + +Therefore for a given UE the mapping in IP to PDN network is: + * network device + MS IP -> Peer IP + Peer TEID, + +and from PDN to IP network: + * local GTP-U IP + TEID -> network device + +Furthermore, before a received T-PDU is injected into the network +device the MS IP is checked against the IP recorded in PDP context. diff --git a/Documentation/networking/ila.txt b/Documentation/networking/ila.txt new file mode 100644 index 0000000000000000000000000000000000000000..78df879abd263cbb907a03f36b809d0b5cd567c5 --- /dev/null +++ b/Documentation/networking/ila.txt @@ -0,0 +1,285 @@ +Identifier Locator Addressing (ILA) + + +Introduction +============ + +Identifier-locator addressing (ILA) is a technique used with IPv6 that +differentiates between location and identity of a network node. Part of an +address expresses the immutable identity of the node, and another part +indicates the location of the node which can be dynamic. Identifier-locator +addressing can be used to efficiently implement overlay networks for +network virtualization as well as solutions for use cases in mobility. + +ILA can be thought of as means to implement an overlay network without +encapsulation. This is accomplished by performing network address +translation on destination addresses as a packet traverses a network. To +the network, an ILA translated packet appears to be no different than any +other IPv6 packet. For instance, if the transport protocol is TCP then an +ILA translated packet looks like just another TCP/IPv6 packet. The +advantage of this is that ILA is transparent to the network so that +optimizations in the network, such as ECMP, RSS, GRO, GSO, etc., just work. + +The ILA protocol is described in Internet-Draft draft-herbert-intarea-ila. + + +ILA terminology +=============== + + - Identifier A number that identifies an addressable node in the network + independent of its location. ILA identifiers are sixty-four + bit values. + + - Locator A network prefix that routes to a physical host. Locators + provide the topological location of an addressed node. ILA + locators are sixty-four bit prefixes. + + - ILA mapping + A mapping of an ILA identifier to a locator (or to a + locator and meta data). An ILA domain maintains a database + that contains mappings for all destinations in the domain. + + - SIR address + An IPv6 address composed of a SIR prefix (upper sixty- + four bits) and an identifier (lower sixty-four bits). + SIR addresses are visible to applications and provide a + means for them to address nodes independent of their + location. + + - ILA address + An IPv6 address composed of a locator (upper sixty-four + bits) and an identifier (low order sixty-four bits). ILA + addresses are never visible to an application. + + - ILA host An end host that is capable of performing ILA translations + on transmit or receive. + + - ILA router A network node that performs ILA translation and forwarding + of translated packets. + + - ILA forwarding cache + A type of ILA router that only maintains a working set + cache of mappings. + + - ILA node A network node capable of performing ILA translations. This + can be an ILA router, ILA forwarding cache, or ILA host. + + +Operation +========= + +There are two fundamental operations with ILA: + + - Translate a SIR address to an ILA address. This is performed on ingress + to an ILA overlay. + + - Translate an ILA address to a SIR address. This is performed on egress + from the ILA overlay. + +ILA can be deployed either on end hosts or intermediate devices in the +network; these are provided by "ILA hosts" and "ILA routers" respectively. +Configuration and datapath for these two points of deployment is somewhat +different. + +The diagram below illustrates the flow of packets through ILA as well +as showing ILA hosts and routers. + + +--------+ +--------+ + | Host A +-+ +--->| Host B | + | | | (2) ILA (') | | + +--------+ | ...addressed.... ( ) +--------+ + V +---+--+ . packet . +---+--+ (_) + (1) SIR | | ILA |----->-------->---->| ILA | | (3) SIR + addressed +->|router| . . |router|->-+ addressed + packet +---+--+ . IPv6 . +---+--+ packet + / . Network . + / . . +--+-++--------+ + +--------+ / . . |ILA || Host | + | Host +--+ . .- -|host|| | + | | . . +--+-++--------+ + +--------+ ................ + + +Transport checksum handling +=========================== + +When an address is translated by ILA, an encapsulated transport checksum +that includes the translated address in a pseudo header may be rendered +incorrect on the wire. This is a problem for intermediate devices, +including checksum offload in NICs, that process the checksum. There are +three options to deal with this: + +- no action Allow the checksum to be incorrect on the wire. Before + a receiver verifies a checksum the ILA to SIR address + translation must be done. + +- adjust transport checksum + When ILA translation is performed the packet is parsed + and if a transport layer checksum is found then it is + adjusted to reflect the correct checksum per the + translated address. + +- checksum neutral mapping + When an address is translated the difference can be offset + elsewhere in a part of the packet that is covered by the + the checksum. The low order sixteen bits of the identifier + are used. This method is preferred since it doesn't require + parsing a packet beyond the IP header and in most cases the + adjustment can be precomputed and saved with the mapping. + +Note that the checksum neutral adjustment affects the low order sixteen +bits of the identifier. When ILA to SIR address translation is done on +egress the low order bits are restored to the original value which +restores the identifier as it was originally sent. + + +Identifier types +================ + +ILA defines different types of identifiers for different use cases. + +The defined types are: + + 0: interface identifier + + 1: locally unique identifier + + 2: virtual networking identifier for IPv4 address + + 3: virtual networking identifier for IPv6 unicast address + + 4: virtual networking identifier for IPv6 multicast address + + 5: non-local address identifier + +In the current implementation of kernel ILA only locally unique identifiers +(LUID) are supported. LUID allows for a generic, unformatted 64 bit +identifier. + + +Identifier formats +================== + +Kernel ILA supports two optional fields in an identifier for formatting: +"C-bit" and "identifier type". The presence of these fields is determined +by configuration as demonstrated below. + +If the identifier type is present it occupies the three highest order +bits of an identifier. The possible values are given in the above list. + +If the C-bit is present, this is used as an indication that checksum +neutral mapping has been done. The C-bit can only be set in an +ILA address, never a SIR address. + +In the simplest format the identifier types, C-bit, and checksum +adjustment value are not present so an identifier is considered an +unstructured sixty-four bit value. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Identifier | + + + + | | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +The checksum neutral adjustment may be configured to always be +present using neutral-map-auto. In this case there is no C-bit, but the +checksum adjustment is in the low order 16 bits. The identifier is +still sixty-four bits. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Identifier | + | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +The C-bit may used to explicitly indicate that checksum neutral +mapping has been applied to an ILA address. The format is: + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | |C| Identifier | + | +-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +The identifier type field may be present to indicate the identifier +type. If it is not present then the type is inferred based on mapping +configuration. The checksum neutral adjustment may automatically +used with the identifier type as illustrated below. + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Type| Identifier | + +-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +If the identifier type and the C-bit can be present simultaneously so +the identifier format would be: + + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Type|C| Identifier | + +-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | Checksum-neutral adjustment | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + +Configuration +============= + +There are two methods to configure ILA mappings. One is by using LWT routes +and the other is ila_xlat (called from NFHOOK PREROUTING hook). ila_xlat +is intended to be used in the receive path for ILA hosts . + +An ILA router has also been implemented in XDP. Description of that is +outside the scope of this document. + +The usage of for ILA LWT routes is: + +ip route add DEST/128 encap ila LOC csum-mode MODE ident-type TYPE via ADDR + +Destination (DEST) can either be a SIR address (for an ILA host or ingress +ILA router) or an ILA address (egress ILA router). LOC is the sixty-four +bit locator (with format W:X:Y:Z) that overwrites the upper sixty-four +bits of the destination address. Checksum MODE is one of "no-action", +"adj-transport", "neutral-map", and "neutral-map-auto". If neutral-map is +set then the C-bit will be present. Identifier TYPE one of "luid" or +"use-format." In the case of use-format, the identifier type field is +present and the effective type is taken from that. + +The usage of ila_xlat is: + +ip ila add loc_match MATCH loc LOC csum-mode MODE ident-type TYPE + +MATCH indicates the incoming locator that must be matched to apply +a the translaiton. LOC is the locator that overwrites the upper +sixty-four bits of the destination address. MODE and TYPE have the +same meanings as described above. + + +Some examples +============= + +# Configure an ILA route that uses checksum neutral mapping as well +# as type field. Note that the type field is set in the SIR address +# (the 2000 implies type is 1 which is LUID). +ip route add 3333:0:0:1:2000:0:1:87/128 encap ila 2001:0:87:0 \ + csum-mode neutral-map ident-type use-format + +# Configure an ILA LWT route that uses auto checksum neutral mapping +# (no C-bit) and configure identifier type to be LUID so that the +# identifier type field will not be present. +ip route add 3333:0:0:1:2000:0:2:87/128 encap ila 2001:0:87:1 \ + csum-mode neutral-map-auto ident-type luid + +ila_xlat configuration + +# Configure an ILA to SIR mapping that matches a locator and overwrites +# it with a SIR address (3333:0:0:1 in this example). The C-bit and +# identifier field are used. +ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \ + csum-mode neutral-map-auto ident-type use-format + +# Configure an ILA to SIR mapping where checksum neutral is automatically +# set without the C-bit and the identifier type is configured to be LUID +# so that the identifier type field is not present. +ip ila add loc_match 2001:0:119:0 loc 3333:0:0:1 \ + csum-mode neutral-map-auto ident-type use-format diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 77f4de59dc9ceb3cdb36692d1ea41e1d861468b0..46c7e1085efcccc178a644917e5e80fa736781fd 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -289,8 +289,7 @@ tcp_ecn_fallback - BOOLEAN Default: 1 (fallback enabled) tcp_fack - BOOLEAN - Enable FACK congestion avoidance and fast retransmission. - The value is not used, if tcp_sack is not enabled. + This is a legacy option, it has no effect anymore. tcp_fin_timeout - INTEGER The length of time an orphaned (no longer referenced by any @@ -454,6 +453,7 @@ tcp_recovery - INTEGER RACK: 0x1 enables the RACK loss detection for fast detection of lost retransmissions and tail drops. + RACK: 0x2 makes RACK's reordering window static (min_rtt/4). Default: 0x1 @@ -1385,6 +1385,30 @@ mld_qrv - INTEGER Default: 2 (as specified by RFC3810 9.1) Minimum: 1 (as specified by RFC6636 4.5) +max_dst_opts_cnt - INTEGER + Maximum number of non-padding TLVs allowed in a Destination + options extension header. If this value is less than zero + then unknown options are disallowed and the number of known + TLVs allowed is the absolute value of this number. + Default: 8 + +max_hbh_opts_cnt - INTEGER + Maximum number of non-padding TLVs allowed in a Hop-by-Hop + options extension header. If this value is less than zero + then unknown options are disallowed and the number of known + TLVs allowed is the absolute value of this number. + Default: 8 + +max dst_opts_len - INTEGER + Maximum length allowed for a Destination options extension + header. + Default: INT_MAX (unlimited) + +max hbh_opts_len - INTEGER + Maximum length allowed for a Hop-by-Hop options extension + header. + Default: INT_MAX (unlimited) + IPv6 Fragmentation: ip6frag_high_thresh - INTEGER @@ -1707,6 +1731,15 @@ ndisc_notify - BOOLEAN 1 - Generate unsolicited neighbour advertisements when device is brought up or hardware address changes. +ndisc_tclass - INTEGER + The IPv6 Traffic Class to use by default when sending IPv6 Neighbor + Discovery (Router Solicitation, Router Advertisement, Neighbor + Solicitation, Neighbor Advertisement, Redirect) messages. + These 8 bits can be interpreted as 6 high order bits holding the DSCP + value and 2 low order bits representing ECN (which you probably want + to leave cleared). + 0 - (default) + mldv1_unsolicited_report_interval - INTEGER The interval in milliseconds in which the next unsolicited MLDv1 report retransmit will take place. diff --git a/Documentation/networking/ipvlan.txt b/Documentation/networking/ipvlan.txt index 1fe42a874aae02bec8c8c784389ea48033418c9a..812ef003e0a8614c45476dddd2f6209ea387f5af 100644 --- a/Documentation/networking/ipvlan.txt +++ b/Documentation/networking/ipvlan.txt @@ -22,9 +22,21 @@ The driver can be built into the kernel (CONFIG_IPVLAN=y) or as a module There are no module parameters for this driver and it can be configured using IProute2/ip utility. - ip link add link name type ipvlan mode { l2 | l3 | l3s } - - e.g. ip link add link eth0 name ipvl0 type ipvlan mode l2 + ip link add link name type ipvlan [ mode MODE ] [ FLAGS ] + where + MODE: l3 (default) | l3s | l2 + FLAGS: bridge (default) | private | vepa + + e.g. + (a) Following will create IPvlan link with eth0 as master in + L3 bridge mode + bash# ip link add link eth0 name ipvl0 type ipvlan + (b) This command will create IPvlan link in L2 bridge mode. + bash# ip link add link eth0 name ipvl0 type ipvlan mode l2 bridge + (c) This command will create an IPvlan device in L2 private mode. + bash# ip link add link eth0 name ipvlan type ipvlan mode l2 private + (d) This command will create an IPvlan device in L2 vepa mode. + bash# ip link add link eth0 name ipvlan type ipvlan mode l2 vepa 4. Operating modes: @@ -54,7 +66,29 @@ works in this mode and hence it is L3-symmetric (L3s). This will have slightly l performance but that shouldn't matter since you are choosing this mode over plain-L3 mode to make conn-tracking work. -5. What to choose (macvlan vs. ipvlan)? +5. Mode flags: + At this time following mode flags are available + +5.1 bridge: + This is the default option. To configure the IPvlan port in this mode, +user can choose to either add this option on the command-line or don't specify +anything. This is the traditional mode where slaves can cross-talk among +themseleves apart from talking through the master device. + +5.2 private: + If this option is added to the command-line, the port is set in private +mode. i.e. port wont allow cross communication between slaves. + +5.3 vepa: + If this is added to the command-line, the port is set in VEPA mode. +i.e. port will offload switching functionality to the external entity as +described in 802.1Qbg +Note: VEPA mode in IPvlan has limitations. IPvlan uses the mac-address of the +master-device, so the packets which are emitted in this mode for the adjacent +neighbor will have source and destination mac same. This will make the switch / +router send the redirect message. + +6. What to choose (macvlan vs. ipvlan)? These two devices are very similar in many regards and the specific use case could very well define which device to choose. if one of the following situations defines your use case then you can choose to use ipvlan - diff --git a/Documentation/networking/netdev-FAQ.txt b/Documentation/networking/netdev-FAQ.txt index cfc66ea72329ba4d953da900bec39e3c0c19d70a..2a3278d5cf35370aa6fb3679b0109a71365a9c62 100644 --- a/Documentation/networking/netdev-FAQ.txt +++ b/Documentation/networking/netdev-FAQ.txt @@ -64,7 +64,10 @@ A: To understand this, you need to know a bit of background information If you aren't subscribed to netdev and/or are simply unsure if net-next has re-opened yet, simply check the net-next git repository link above for - any new networking-related commits. + any new networking-related commits. You may also check the following + website for the current status: + + http://vger.kernel.org/~davem/net-next.html The "net" tree continues to collect fixes for the vX.Y content, and is fed back to Linus at regular (~weekly) intervals. Meaning that the diff --git a/Documentation/networking/netvsc.txt b/Documentation/networking/netvsc.txt index 93560fb1170a6cb77b7882a3105323dc0d7341b4..92f5b31392fac508f4a465b64de130de4ab1f4ee 100644 --- a/Documentation/networking/netvsc.txt +++ b/Documentation/networking/netvsc.txt @@ -19,12 +19,12 @@ Features Receive Side Scaling -------------------- - Hyper-V supports receive side scaling. For TCP, packets are - distributed among available queues based on IP address and port + Hyper-V supports receive side scaling. For TCP & UDP, packets can + be distributed among available queues based on IP address and port number. - For UDP, we can switch UDP hash level between L3 and L4 by ethtool - command. UDP over IPv4 and v6 can be set differently. The default + For TCP & UDP, we can switch hash level between L3 and L4 by ethtool + command. TCP/UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index 7818b5fe448b60dae421e391ec4679b1c1f18c79..381e5b23d61d8858dd451ad9d13c8c4ee29284b3 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -19,6 +19,14 @@ core regulatory domain all wireless devices should adhere to. How to get regulatory domains to the kernel ------------------------------------------- +When the regulatory domain is first set up, the kernel will request a +database file (regulatory.db) containing all the regulatory rules. It +will then use that database when it needs to look up the rules for a +given country. + +How to get regulatory domains to the kernel (old CRDA solution) +--------------------------------------------------------------- + Userspace gets a regulatory domain in the kernel by having a userspace agent build it and send it via nl80211. Only expected regulatory domains will be respected by the kernel. @@ -192,23 +200,5 @@ Then in some part of your code after your wiphy has been registered: Statically compiled regulatory database --------------------------------------- -In most situations the userland solution using CRDA as described -above is the preferred solution. However in some cases a set of -rules built into the kernel itself may be desirable. To account -for this situation, a configuration option has been provided -(i.e. CONFIG_CFG80211_INTERNAL_REGDB). With this option enabled, -the wireless database information contained in net/wireless/db.txt is -used to generate a data structure encoded in net/wireless/regdb.c. -That option also enables code in net/wireless/reg.c which queries -the data in regdb.c as an alternative to using CRDA. - -The file net/wireless/db.txt should be kept up-to-date with the db.txt -file available in the git repository here: - - git://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git - -Again, most users in most situations should be using the CRDA package -provided with their distribution, and in most other situations users -should be building and using CRDA on their own rather than using -this option. If you are not absolutely sure that you should be using -CONFIG_CFG80211_INTERNAL_REGDB then _DO_NOT_USE_IT_. +When a database should be fixed into the kernel, it can be provided as a +firmware file at build time that is then linked into the kernel. diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 810620153a44c0296f40dcffcb0196e571dc2a60..b5407163d53bea922c58af999aeb4c49b17ed266 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -280,6 +280,18 @@ Interaction with the user of the RxRPC socket: nominated by a socket option. +Notes on sendmsg: + + (*) MSG_WAITALL can be set to tell sendmsg to ignore signals if the peer is + making progress at accepting packets within a reasonable time such that we + manage to queue up all the data for transmission. This requires the + client to accept at least one packet per 2*RTT time period. + + If this isn't set, sendmsg() will return immediately, either returning + EINTR/ERESTARTSYS if nothing was consumed or returning the amount of data + consumed. + + Notes on recvmsg: (*) If there's a sequence of data messages belonging to a particular call on @@ -782,7 +794,9 @@ The kernel interface functions are as follows: struct key *key, unsigned long user_call_ID, s64 tx_total_len, - gfp_t gfp); + gfp_t gfp, + rxrpc_notify_rx_t notify_rx, + bool upgrade); This allocates the infrastructure to make a new RxRPC call and assigns call and connection numbers. The call will be made on the UDP port that @@ -803,6 +817,13 @@ The kernel interface functions are as follows: allows the kernel to encrypt directly to the packet buffers, thereby saving a copy. The value may not be less than -1. + notify_rx is a pointer to a function to be called when events such as + incoming data packets or remote aborts happen. + + upgrade should be set to true if a client operation should request that + the server upgrade the service to a better one. The resultant service ID + is returned by rxrpc_kernel_recv_data(). + If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. @@ -850,7 +871,8 @@ The kernel interface functions are as follows: size_t size, size_t *_offset, bool want_more, - u32 *_abort) + u32 *_abort, + u16 *_service) This is used to receive data from either the reply part of a client call or the request part of a service call. buf and size specify how much @@ -873,6 +895,9 @@ The kernel interface functions are as follows: If a remote ABORT is detected, the abort code received will be stored in *_abort and ECONNABORTED will be returned. + The service ID that the call ended up with is returned into *_service. + This can be used to see if a call got a service upgrade. + (*) Abort a call. void rxrpc_kernel_abort_call(struct socket *sock, @@ -1020,6 +1045,30 @@ The kernel interface functions are as follows: It returns 0 if the call was requeued and an error otherwise. + (*) Get call RTT. + + u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call); + + Get the RTT time to the peer in use by a call. The value returned is in + nanoseconds. + + (*) Check call still alive. + + u32 rxrpc_kernel_check_life(struct socket *sock, + struct rxrpc_call *call); + + This returns a number that is updated when ACKs are received from the peer + (notably including PING RESPONSE ACKs which we can elicit by sending PING + ACKs to see if the call still exists on the server). The caller should + compare the numbers of two calls to see if the call is still alive after + waiting for a suitable interval. + + This allows the caller to work out if the server is still contactable and + if the call is still alive on the server whilst waiting for the server to + process a client operation. + + This function may transmit a PING ACK. + ======================= CONFIGURABLE PARAMETERS diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index 3918dae964d4960ccb8b32a566bedd16a999ce68..8ff7b4c8f91bc45da4f4c50792e0dc5587b62875 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -71,7 +71,12 @@ Setup ip ru add iif vrf-blue table 10 3. Set the default route for the table (and hence default route for the VRF). - ip route add table 10 unreachable default + ip route add table 10 unreachable default metric 4278198272 + + This high metric value ensures that the default unreachable route can + be overridden by a routing protocol suite. FRRouting interprets + kernel metrics as a combined admin distance (upper byte) and priority + (lower 3 bytes). Thus the above metric translates to [255/8192]. 4. Enslave L3 interfaces to a VRF device. ip link set dev eth1 master vrf-blue @@ -256,7 +261,7 @@ older form without it. For example: $ ip route show vrf red - prohibit default + unreachable default metric 4278198272 broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 @@ -282,7 +287,7 @@ older form without it. ff00::/8 dev red metric 256 pref medium ff00::/8 dev eth1 metric 256 pref medium ff00::/8 dev eth2 metric 256 pref medium - + unreachable default dev lo metric 4278198272 error -101 pref medium 8. Route Lookup for a VRF @@ -331,7 +336,7 @@ function vrf_create ip link add ${VRF} type vrf table ${TBID} if [ "${VRF}" != "mgmt" ]; then - ip route add table ${TBID} unreachable default + ip route add table ${TBID} unreachable default metric 4278198272 fi ip link set dev ${VRF} up } diff --git a/Documentation/perf/hisi-pmu.txt b/Documentation/perf/hisi-pmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..267a028b2741811f08f82897149cf92701cb5f5c --- /dev/null +++ b/Documentation/perf/hisi-pmu.txt @@ -0,0 +1,53 @@ +HiSilicon SoC uncore Performance Monitoring Unit (PMU) +====================================================== +The HiSilicon SoC chip includes various independent system device PMUs +such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are +independent and have hardware logic to gather statistics and performance +information. + +The HiSilicon SoC encapsulates multiple CPU and IO dies. Each CPU cluster +(CCL) is made up of 4 cpu cores sharing one L3 cache; each CPU die is +called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has +two HHAs (0 - 1) and four DDRCs (0 - 3), respectively. + +HiSilicon SoC uncore PMU driver +--------------------------------------- +Each device PMU has separate registers for event counting, control and +interrupt, and the PMU driver shall register perf PMU drivers like L3C, +HHA and DDRC etc. The available events and configuration options shall +be described in the sysfs, see : +/sys/devices/hisi_sccl{X}_/, or +/sys/bus/event_source/devices/hisi_sccl{X}_. +The "perf list" command shall list the available events from sysfs. + +Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU +name will appear in event listing as hisi_sccl_module. +where "sccl-id" is the identifier of the SCCL and "index-id" is the index of +module. +e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in +SCCL ID #3. +e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in +SCCL ID #1. + +The driver also provides a "cpumask" sysfs attribute, which shows the CPU core +ID used to count the uncore PMU event. + +Example usage of perf: +$# perf list +hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event] +------------------------------------------ +hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event] +------------------------------------------ +hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event] +------------------------------------------ +hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event] +------------------------------------------ + +$# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5 +$# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5 + +The current driver does not support sampling. So "perf record" is unsupported. +Also attach to a task is unsupported as the events are all uncore. + +Note: Please contact the maintainer for a complete list of events supported for +the PMU devices in the SoC and its information if needed. diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index d17fdf8f45ef59e8a014bcd16c604a12ebdf61d7..704cd36079b8081a7b06ce1f7ca5761d31e0ef3c 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -961,6 +961,39 @@ dev_pm_ops to indicate that one suspend routine is to be pointed to by the .suspend(), .freeze(), and .poweroff() members and one resume routine is to be pointed to by the .resume(), .thaw(), and .restore() members. +3.1.19. Driver Flags for Power Management + +The PM core allows device drivers to set flags that influence the handling of +power management for the devices by the core itself and by middle layer code +including the PCI bus type. The flags should be set once at the driver probe +time with the help of the dev_pm_set_driver_flags() function and they should not +be updated directly afterwards. + +The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete +mechanism allowing device suspend/resume callbacks to be skipped if the device +is in runtime suspend when the system suspend starts. That also affects all of +the ancestors of the device, so this flag should only be used if absolutely +necessary. + +The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a +positive value from pci_pm_prepare() if the ->prepare callback provided by the +driver of the device returns a positive value. That allows the driver to opt +out from using the direct-complete mechanism dynamically. + +The DPM_FLAG_SMART_SUSPEND flag tells the PCI bus type that from the driver's +perspective the device can be safely left in runtime suspend during system +suspend. That causes pci_pm_suspend(), pci_pm_freeze() and pci_pm_poweroff() +to skip resuming the device from runtime suspend unless there are PCI-specific +reasons for doing that. Also, it causes pci_pm_suspend_late/noirq(), +pci_pm_freeze_late/noirq() and pci_pm_poweroff_late/noirq() to return early +if the device remains in runtime suspend in the beginning of the "late" phase +of the system-wide transition under way. Moreover, if the device is in +runtime suspend in pci_pm_resume_noirq() or pci_pm_restore_noirq(), its runtime +power management status will be changed to "active" (as it is going to be put +into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(), +the function will set the power.direct_complete flag for it (to make the PM core +skip the subsequent "thaw" callbacks for it) and return. + 3.2. Device Runtime Power Management ------------------------------------ In addition to providing device power management callbacks PCI device drivers diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index 21d2d48f87a254a2c4281bae68646f29c393fb14..19c5f7b1a7babed3e55a5918097c36243a707f86 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt @@ -98,8 +98,7 @@ Values are updated in response to changes of the request list. The target values of resume latency and active state latency tolerance are simply the minimum of the request values held in the parameter list elements. The PM QoS flags aggregate value is a gather (bitwise OR) of all list elements' -values. Two device PM QoS flags are defined currently: PM_QOS_FLAG_NO_POWER_OFF -and PM_QOS_FLAG_REMOTE_WAKEUP. +values. One device PM QoS flag is defined currently: PM_QOS_FLAG_NO_POWER_OFF. Note: The aggregated target values are implemented in such a way that reading the aggregated value does not require any locking mechanism. @@ -153,14 +152,14 @@ PM QoS list of resume latency constraints and remove sysfs attribute pm_qos_resume_latency_us from the device's power directory. int dev_pm_qos_expose_flags(device, value) -Add a request to the device's PM QoS list of flags and create sysfs attributes -pm_qos_no_power_off and pm_qos_remote_wakeup under the device's power directory -allowing user space to change these flags' value. +Add a request to the device's PM QoS list of flags and create sysfs attribute +pm_qos_no_power_off under the device's power directory allowing user space to +change the value of the PM_QOS_FLAG_NO_POWER_OFF flag. void dev_pm_qos_hide_flags(device) Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list -of flags and remove sysfs attributes pm_qos_no_power_off and pm_qos_remote_wakeup -under the device's power directory. +of flags and remove sysfs attribute pm_qos_no_power_off from the device's power +directory. Notification mechanisms: The per-device PM QoS framework has a per-device notification tree. diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 57af2f7963eea56edef636905f7cc6a007d221f9..937e33c4621160c98c0728cfe283fe6f023d2a4c 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -435,8 +435,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: PM status to 'suspended' and update its parent's counter of 'active' children as appropriate (it is only valid to use this function if 'power.runtime_error' is set or 'power.disable_depth' is greater than - zero); it will fail and return an error code if the device has a child - which is active and the 'power.ignore_children' flag is unset + zero) bool pm_runtime_active(struct device *dev); - return true if the device's runtime PM status is 'active' or its diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 8477655c0e46ebc8605665a2a988ca6f455896b6..453d4b79c78df3ebd89e567307e0f1a7ecac6ea7 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -50,10 +50,11 @@ parameters may be changed at runtime by the command mac5380= [HW,SCSI] See drivers/scsi/mac_scsi.c. - max_luns= [SCSI] Maximum number of LUNs to probe. + scsi_mod.max_luns= + [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. - max_report_luns= + scsi_mod.max_report_luns= [SCSI] Maximum number of LUNs received. Should be between 1 and 16384. @@ -80,15 +81,17 @@ parameters may be changed at runtime by the command scsi_debug_*= [SCSI] See drivers/scsi/scsi_debug.c. - scsi_default_dev_flags= + scsi_mod.default_dev_flags= [SCSI] SCSI default device flags Format: - scsi_dev_flags= [SCSI] Black/white list entry for vendor and model + scsi_mod.dev_flags= + [SCSI] Black/white list entry for vendor and model Format: :: (flags are integer value) - scsi_logging_level= [SCSI] a bit mask of logging levels + scsi_mod.scsi_logging_level= + [SCSI] a bit mask of logging levels See drivers/scsi/scsi_logging.h for bits. Also settable via sysctl at dev.scsi.logging_level (/proc/sys/dev/scsi/logging_level). diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.txt index ab377d9e5d1b50a95e4c43c63101f788dc1f82c9..201f80c7c0506e5e5772006b9f874d4081920d6f 100644 --- a/Documentation/scsi/smartpqi.txt +++ b/Documentation/scsi/smartpqi.txt @@ -21,7 +21,7 @@ http://www.t10.org/members/w_pqi2.htm Supported devices: ------------------ - + smartpqi specific entries in /sys ----------------------------- diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst index 773d2bfacc6cc6b8e714fd89c249296d647d3f1f..1fee5a4f6660b9e15d10e3aed1cd1d2d94283a76 100644 --- a/Documentation/sound/hd-audio/models.rst +++ b/Documentation/sound/hd-audio/models.rst @@ -82,6 +82,8 @@ tpt460 Lenovo Thinkpad T460/560 setup dual-codecs Lenovo laptops with dual codecs +alc700-ref + Intel reference board with ALC700 codec ALC66x/67x/892 ============== diff --git a/Documentation/sound/oss/ALS b/Documentation/sound/oss/ALS deleted file mode 100644 index bf10bed4574bc7dd130a54918bb4717c54749450..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/ALS +++ /dev/null @@ -1,66 +0,0 @@ -ALS-007/ALS-100/ALS-200 based sound cards -========================================= - -Support for sound cards based around the Avance Logic -ALS-007/ALS-100/ALS-200 chip is included. These chips are a single -chip PnP sound solution which is mostly hardware compatible with the -Sound Blaster 16 card, with most differences occurring in the use of -the mixer registers. For this reason the ALS code is integrated -as part of the Sound Blaster 16 driver (adding only 800 bytes to the -SB16 driver). - -To use an ALS sound card under Linux, enable the following options as -modules in the sound configuration section of the kernel config: - - 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support - - FM synthesizer (YM3812/OPL-3) support - - standalone MPU401 support may be required for some cards; for the - ALS-007, when using isapnptools, it is required -Since the ALS-007/100/200 are PnP cards, ISAPnP support should probably be -compiled in. If kernel level PnP support is not included, isapnptools will -be required to configure the card before the sound modules are loaded. - -When using kernel level ISAPnP, the kernel should correctly identify and -configure all resources required by the card when the "sb" module is -inserted. Note that the ALS-007 does not have a 16 bit DMA channel and that -the MPU401 interface on this card uses a different interrupt to the audio -section. This should all be correctly configured by the kernel; if problems -with the MPU401 interface surface, try using the standalone MPU401 module, -passing "0" as the "sb" module's "mpu_io" module parameter to prevent the -soundblaster driver attempting to register the MPU401 itself. The onboard -synth device can be accessed using the "opl3" module. - -If isapnptools is used to wake up the sound card (as in 2.2.x), the settings -of the card's resources should be passed to the kernel modules ("sb", "opl3" -and "mpu401") using the module parameters. When configuring an ALS-007, be -sure to specify different IRQs for the audio and MPU401 sections - this card -requires they be different. For "sb", "io", "irq" and "dma" should be set -to the same values used to configure the audio section of the card with -isapnp. "dma16" should be explicitly set to "-1" for an ALS-007 since this -card does not have a 16 bit dma channel; if not specified the kernel will -default to using channel 5 anyway which will cause audio not to work. -"mpu_io" should be set to 0. The "io" parameter of the "opl3" module should -also agree with the setting used by isapnp. To get the MPU401 interface -working on an ALS-007 card, the "mpu401" module will be required since this -card uses separate IRQs for the audio and MPU401 sections and there is no -parameter available to pass a different IRQ to the "sb" driver (whose -inbuilt MPU401 driver would otherwise be fine). Insert the mpu401 module -passing appropriate values using the "io" and "irq" parameters. - -The resulting sound driver will provide the following capabilities: - - 8 and 16 bit audio playback - - 8 and 16 bit audio recording - - Software selection of record source (line in, CD, FM, mic, master) - - Record and playback of midi data via the external MPU-401 - - Playback of midi data using inbuilt FM synthesizer - - Control of the ALS-007 mixer via any OSS-compatible mixer programs. - Controls available are Master (L&R), Line in (L&R), CD (L&R), - DSP/PCM/audio out (L&R), FM (L&R) and Mic in (mono). - -Jonathan Woithe -jwoithe@just42.net -30 March 1998 - -Modified 2000-02-26 by Dave Forrest, drf5n@virginia.edu to add ALS100/ALS200 -Modified 2000-04-10 by Paul Laufer, pelaufer@csupomona.edu to add ISAPnP info. -Modified 2000-11-19 by Jonathan Woithe, jwoithe@just42.net - - updated information for kernel 2.4.x. diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16 deleted file mode 100644 index ea8549faede9d7c1dd35e878632c32ec3886b28a..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/AudioExcelDSP16 +++ /dev/null @@ -1,101 +0,0 @@ -Driver ------- - -Information about Audio Excel DSP 16 driver can be found in the source -file aedsp16.c -Please, read the head of the source before using it. It contain useful -information. - -Configuration -------------- - -The Audio Excel configuration, is now done with the standard Linux setup. -You have to configure the sound card (Sound Blaster or Microsoft Sound System) -and, if you want it, the Roland MPU-401 (do not use the Sound Blaster MPU-401, -SB-MPU401) in the main driver menu. Activate the lowlevel drivers then select -the Audio Excel hardware that you want to initialize. Check the IRQ/DMA/MIRQ -of the Audio Excel initialization: it must be the same as the SBPRO (or MSS) -setup. If the parameters are different, correct it. -I you own a Gallant's audio card based on SC-6600, activate the SC-6600 support. -If you want to change the configuration of the sound board, be sure to -check off all the configuration items before re-configure it. - -Module parameters ------------------ -To use this driver as a module, you must configure some module parameters, to -set up I/O addresses, IRQ lines and DMA channels. Some parameters are -mandatory while some others are optional. Here a list of parameters you can -use with this module: - -Name Description -==== =========== -MANDATORY -io I/O base address (0x220 or 0x240) -irq irq line (5, 7, 9, 10 or 11) -dma dma channel (0, 1 or 3) - -OPTIONAL -mss_base I/O base address for activate MSS mode (default SBPRO) - (0x530 or 0xE80) -mpu_base I/O base address for activate MPU-401 mode - (0x300, 0x310, 0x320 or 0x330) -mpu_irq MPU-401 irq line (5, 7, 9, 10 or 0) - -A configuration file in /etc/modprobe.d/ directory will have lines like this: - -options opl3 io=0x388 -options ad1848 io=0x530 irq=11 dma=3 -options aedsp16 io=0x220 irq=11 dma=3 mss_base=0x530 - -Where the aedsp16 options are the options for this driver while opl3 and -ad1848 are the corresponding options for the MSS and OPL3 modules. - -Loading MSS and OPL3 needs to pre load the aedsp16 module to set up correctly -the sound card. Installation dependencies must be written in configuration -files under /etc/modprobe.d/ directory: - -softdep ad1848 pre: aedsp16 -softdep opl3 pre: aedsp16 - -Then you must load the sound modules stack in this order: -sound -> aedsp16 -> [ ad1848, opl3 ] - -With the above configuration, loading ad1848 or opl3 modules, will -automatically load all the sound stack. - -Sound cards supported ---------------------- -This driver supports the SC-6000 and SC-6600 based Gallant's sound card. -It don't support the Audio Excel DSP 16 III (try the SC-6600 code). -I'm working on the III version of the card: if someone have useful -information about it, please let me know. -For all the non-supported audio cards, you have to boot MS-DOS (or WIN95) -activating the audio card with the MS-DOS device driver, then you have to --- and boot Linux. -Follow these steps: - -1) Compile Linux kernel with standard sound driver, using the emulation - you want, with the parameters of your audio card, - e.g. Microsoft Sound System irq10 dma3 -2) Install your new kernel as the default boot kernel. -3) Boot MS-DOS and configure the audio card with the boot time device - driver, for MSS irq10 dma3 in our example. -4) -- and boot Linux. This will maintain the DOS configuration - and will boot the new kernel with sound driver. The sound driver will find - the audio card and will recognize and attach it. - -Reports on User successes -------------------------- - -> Date: Mon, 29 Jul 1996 08:35:40 +0100 -> From: Mr S J Greenaway -> To: riccardo@cdc8g5.cdc.polimi.it (Riccardo Facchetti) -> Subject: Re: Audio Excel DSP 16 initialization code -> -> Just to let you know got my Audio Excel (emulating a MSS) working -> with my original SB16, thanks for the driver! - - -Last revised: 20 August 1998 -Riccardo Facchetti -fizban@tin.it diff --git a/Documentation/sound/oss/CMI8330 b/Documentation/sound/oss/CMI8330 deleted file mode 100644 index 8a5fd1611c6f2590194ff3d39a3c7b3846e15853..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/CMI8330 +++ /dev/null @@ -1,152 +0,0 @@ -Documentation for CMI 8330 (SoundPRO) -------------------------------------- -Alessandro Zummo - -( Be sure to read Documentation/sound/oss/SoundPro too ) - - -This adapter is now directly supported by the sb driver. - - The only thing you have to do is to compile the kernel sound -support as a module and to enable kernel ISAPnP support, -as shown below. - - -CONFIG_SOUND=m -CONFIG_SOUND_SB=m - -CONFIG_PNP=y -CONFIG_ISAPNP=y - - -and optionally: - - -CONFIG_SOUND_MPU401=m - - for MPU401 support. - - -(I suggest you to use "make menuconfig" or "make xconfig" - for a more comfortable configuration editing) - - - -Then you can do - - modprobe sb - -and everything will be (hopefully) configured. - -You should get something similar in syslog: - -sb: CMI8330 detected. -sb: CMI8330 sb base located at 0x220 -sb: CMI8330 mpu base located at 0x330 -sb: CMI8330 mail reports to Alessandro Zummo -sb: ISAPnP reports CMI 8330 SoundPRO at i/o 0x220, irq 7, dma 1,5 - - - - -The old documentation file follows for reference -purposes. - - -How to enable CMI 8330 (SOUNDPRO) soundchip on Linux ------------------------------------------- -Stefan Laudat - -[Note: The CMI 8338 is unrelated and is supported by cmpci.o] - - - In order to use CMI8330 under Linux you just have to use a proper isapnp.conf, a good isapnp and a little bit of patience. I use isapnp 1.17, but -you may get a better one I guess at http://www.roestock.demon.co.uk/isapnptools/. - - Of course you will have to compile kernel sound support as module, as shown below: - -CONFIG_SOUND=m -CONFIG_SOUND_OSS=m -CONFIG_SOUND_SB=m -CONFIG_SOUND_ADLIB=m -CONFIG_SOUND_MPU401=m -# Mikro$chaft sound system (kinda useful here ;)) -CONFIG_SOUND_MSS=m - - The /etc/isapnp.conf file will be: - - - - -(READPORT 0x0203) -(ISOLATE PRESERVE) -(IDENTIFY *) -(VERBOSITY 2) -(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING -(VERIFYLD N) - - -# WSS - -(CONFIGURE CMI0001/16777472 (LD 0 -(IO 0 (SIZE 8) (BASE 0x0530)) -(IO 1 (SIZE 8) (BASE 0x0388)) -(INT 0 (IRQ 7 (MODE +E))) -(DMA 0 (CHANNEL 0)) -(NAME "CMI0001/16777472[0]{CMI8330/C3D Audio Adapter}") -(ACT Y) -)) - -# MPU - -(CONFIGURE CMI0001/16777472 (LD 1 -(IO 0 (SIZE 2) (BASE 0x0330)) -(INT 0 (IRQ 11 (MODE +E))) -(NAME "CMI0001/16777472[1]{CMI8330/C3D Audio Adapter}") -(ACT Y) -)) - -# Joystick - -(CONFIGURE CMI0001/16777472 (LD 2 -(IO 0 (SIZE 8) (BASE 0x0200)) -(NAME "CMI0001/16777472[2]{CMI8330/C3D Audio Adapter}") -(ACT Y) -)) - -# SoundBlaster - -(CONFIGURE CMI0001/16777472 (LD 3 -(IO 0 (SIZE 16) (BASE 0x0220)) -(INT 0 (IRQ 5 (MODE +E))) -(DMA 0 (CHANNEL 1)) -(DMA 1 (CHANNEL 5)) -(NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}") -(ACT Y) -)) - - -(WAITFORKEY) - - - - The module sequence is trivial: - -/sbin/insmod soundcore -/sbin/insmod sound -/sbin/insmod uart401 -# insert this first -/sbin/insmod ad1848 io=0x530 irq=7 dma=0 soundpro=1 -# The sb module is an alternative to the ad1848 (Microsoft Sound System) -# Anyhow, this is full duplex and has MIDI -/sbin/insmod sb io=0x220 dma=1 dma16=5 irq=5 mpu_io=0x330 - - - -Alma Chao suggests the following in -a /etc/modprobe.d/*conf file: - -alias sound ad1848 -alias synth0 opl3 -options ad1848 io=0x530 irq=7 dma=0 soundpro=1 -options opl3 io=0x388 diff --git a/Documentation/sound/oss/ESS b/Documentation/sound/oss/ESS deleted file mode 100644 index bba93b4d2def113c3bd5deca327f9915485da642..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/ESS +++ /dev/null @@ -1,34 +0,0 @@ -Documentation for the ESS AudioDrive chips - -In 2.4 kernels the SoundBlaster driver not only tries to detect an ESS chip, it -tries to detect the type of ESS chip too. The correct detection of the chip -doesn't always succeed however, so unless you use the kernel isapnp facilities -(and you chip is pnp capable) the default behaviour is 2.0 behaviour which -means: only detect ES688 and ES1688. - -All ESS chips now have a recording level setting. This is a need-to-have for -people who want to use their ESS for recording sound. - -Every chip that's detected as a later-than-es1688 chip has a 6 bits logarithmic -master volume control. - -Every chip that's detected as a ES1887 now has Full Duplex support. Made a -little testprogram that shows that is works, haven't seen a real program that -needs this however. - -For ESS chips an additional parameter "esstype" can be specified. This controls -the (auto) detection of the ESS chips. It can have 3 kinds of values: - --1 Act like 2.0 kernels: only detect ES688 or ES1688. -0 Try to auto-detect the chip (may fail for ES1688) -688 The chip will be treated as ES688 -1688 ,, ,, ,, ,, ,, ,, ES1688 -1868 ,, ,, ,, ,, ,, ,, ES1868 -1869 ,, ,, ,, ,, ,, ,, ES1869 -1788 ,, ,, ,, ,, ,, ,, ES1788 -1887 ,, ,, ,, ,, ,, ,, ES1887 -1888 ,, ,, ,, ,, ,, ,, ES1888 - -Because Full Duplex is supported for ES1887 you can specify a second DMA -channel by specifying module parameter dma16. It can be one of: 0, 1, 3 or 5. - diff --git a/Documentation/sound/oss/ESS1868 b/Documentation/sound/oss/ESS1868 deleted file mode 100644 index 55e922f21bc03ee5a21d3dd643d464d088aabb9c..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/ESS1868 +++ /dev/null @@ -1,55 +0,0 @@ -Documentation for the ESS1868F AudioDrive PnP sound card - -The ESS1868 sound card is a PnP ESS1688-compatible 16-bit sound card. - -It should be automatically detected by the Linux Kernel isapnp support when you -load the sb.o module. Otherwise you should take care of: - - * The ESS1868 does not allow use of a 16-bit DMA, thus DMA 0, 1, 2, and 3 - may only be used. - - * isapnptools version 1.14 does work with ESS1868. Earlier versions might - not. - - * Sound support MUST be compiled as MODULES, not statically linked - into the kernel. - - -NOTE: this is only needed when not using the kernel isapnp support! - -For configuring the sound card's I/O addresses, IRQ and DMA, here is a -sample copy of the isapnp.conf directives regarding the ESS1868: - -(CONFIGURE ESS1868/-1 (LD 1 -(IO 0 (BASE 0x0220)) -(IO 1 (BASE 0x0388)) -(IO 2 (BASE 0x0330)) -(DMA 0 (CHANNEL 1)) -(INT 0 (IRQ 5 (MODE +E))) -(ACT Y) -)) - -(for a full working isapnp.conf file, remember the -(ISOLATE) -(IDENTIFY *) -at the beginning and the -(WAITFORKEY) -at the end.) - -In this setup, the main card I/O is 0x0220, FM synthesizer is 0x0388, and -the MPU-401 MIDI port is located at 0x0330. IRQ is IRQ 5, DMA is channel 1. - -After configuring the sound card via isapnp, to use the card you must load -the sound modules with the proper I/O information. Here is my setup: - -# ESS1868F AudioDrive initialization - -/sbin/modprobe sound -/sbin/insmod uart401 -/sbin/insmod sb io=0x220 irq=5 dma=1 dma16=-1 -/sbin/insmod mpu401 io=0x330 -/sbin/insmod opl3 io=0x388 -/sbin/insmod v_midi - -opl3 is the FM synthesizer -/sbin/insmod opl3 io=0x388 diff --git a/Documentation/sound/oss/Introduction b/Documentation/sound/oss/Introduction deleted file mode 100644 index 42da2d8fa37222269c3ba8c0f8577baf5c1e85a5..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/Introduction +++ /dev/null @@ -1,459 +0,0 @@ -Introduction Notes on Modular Sound Drivers and Soundcore -Wade Hampton -2/14/2001 - -Purpose: -======== -This document provides some general notes on the modular -sound drivers and their configuration, along with the -support modules sound.o and soundcore.o. - -Note, some of this probably should be added to the Sound-HOWTO! - -Note, soundlow.o was present with 2.2 kernels but is not -required for 2.4.x kernels. References have been removed -to this. - - -Copying: -======== -none - - -History: -======== -0.1.0 11/20/1998 First version, draft -1.0.0 11/1998 Alan Cox changes, incorporation in 2.2.0 - as Documentation/sound/oss/Introduction -1.1.0 6/30/1999 Second version, added notes on making the drivers, - added info on multiple sound cards of similar types,] - added more diagnostics info, added info about esd. - added info on OSS and ALSA. -1.1.1 19991031 Added notes on sound-slot- and sound-service. - (Alan Cox) -1.1.2 20000920 Modified for Kernel 2.4 (Christoph Hellwig) -1.1.3 20010214 Minor notes and corrections (Wade Hampton) - Added examples of sound-slot-0, etc. - - -Modular Sound Drivers: -====================== - -Thanks to the GREAT work by Alan Cox (alan@lxorguk.ukuu.org.uk), - -[And Oleg Drokin, Thomas Sailer, Andrew Veliath and more than a few - others - not to mention Hannu's original code being designed well - enough to cope with that kind of chopping up](Alan) - -the standard Linux kernels support a modular sound driver. From -Alan's comments in linux/drivers/sound/README.FIRST: - - The modular sound driver patches were funded by Red Hat Software - (www.redhat.com). The sound driver here is thus a modified version of - Hannu's code. Please bear that in mind when considering the appropriate - forums for bug reporting. - -The modular sound drivers may be loaded via insmod or modprobe. -To support all the various sound modules, there are two general -support modules that must be loaded first: - - soundcore.o: Top level handler for the sound system, provides - a set of functions for registration of devices - by type. - - sound.o: Common sound functions required by all modules. - -For the specific sound modules (e.g., sb.o for the Soundblaster), -read the documentation on that module to determine what options -are available, for example IRQ, address, DMA. - -Warning, the options for different cards sometime use different names -for the same or a similar feature (dma1= versus dma16=). As a last -resort, inspect the code (search for module_param). - -Notes: - -1. There is a new OpenSource sound driver called ALSA which is - currently under development: http://www.alsa-project.org/ - The ALSA drivers support some newer hardware that may not - be supported by this sound driver and also provide some - additional features. - -2. The commercial OSS driver may be obtained from the site: - http://www.opensound.com. This may be used for cards that - are unsupported by the kernel driver, or may be used - by other operating systems. - -3. The enlightenment sound daemon may be used for playing - multiple sounds at the same time via a single card, eliminating - some of the requirements for multiple sound card systems. For - more information, see: http://www.tux.org/~ricdude/EsounD.html - The "esd" program may be used with the real-player and mpeg - players like mpg123 and x11amp. The newer real-player - and some games even include built-in support for ESD! - - -Building the Modules: -===================== - -This document does not provide full details on building the -kernel, etc. The notes below apply only to making the kernel -sound modules. If this conflicts with the kernel's README, -the README takes precedence. - -1. To make the kernel sound modules, cd to your /usr/src/linux - directory (typically) and type make config, make menuconfig, - or make xconfig (to start the command line, dialog, or x-based - configuration tool). - -2. Select the Sound option and a dialog will be displayed. - -3. Select M (module) for "Sound card support". - -4. Select your sound driver(s) as a module. For ProAudio, Sound - Blaster, etc., select M (module) for OSS sound modules. - [thanks to Marvin Stodolsky ]A - -5. Make the kernel (e.g., make bzImage), and install the kernel. - -6. Make the modules and install them (make modules; make modules_install). - -Note, for 2.5.x kernels, make sure you have the newer module-init-tools -installed or modules will not be loaded properly. 2.5.x requires an -updated module-init-tools. - - -Plug and Play (PnP: -=================== - -If the sound card is an ISA PnP card, isapnp may be used -to configure the card. See the file isapnp.txt in the -directory one level up (e.g., /usr/src/linux/Documentation). - -Also the 2.4.x kernels provide PnP capabilities, see the -file NEWS in this directory. - -PCI sound cards are highly recommended, as they are far -easier to configure and from what I have read, they use -less resources and are more CPU efficient. - - -INSMOD: -======= - -If loading via insmod, the common modules must be loaded in the -order below BEFORE loading the other sound modules. The card-specific -modules may then be loaded (most require parameters). For example, -I use the following via a shell script to load my SoundBlaster: - -SB_BASE=0x240 -SB_IRQ=9 -SB_DMA=3 -SB_DMA2=5 -SB_MPU=0x300 -# -echo Starting sound -/sbin/insmod soundcore -/sbin/insmod sound -# -echo Starting sound blaster.... -/sbin/insmod uart401 -/sbin/insmod sb io=$SB_BASE irq=$SB_IRQ dma=$SB_DMA dma16=$SB_DMA2 mpu_io=$SB_MP - -When using sound as a module, I typically put these commands -in a file such as /root/soundon.sh. - - -MODPROBE: -========= - -If loading via modprobe, these common files are automatically loaded when -requested by modprobe. For example, my /etc/modprobe.d/oss.conf contains: - -alias sound sb -options sb io=0x240 irq=9 dma=3 dma16=5 mpu_io=0x300 - -All you need to do to load the module is: - - /sbin/modprobe sb - - -Sound Status: -============= - -The status of sound may be read/checked by: - cat (anyfile).au >/dev/audio - -[WWH: This may not work properly for SoundBlaster PCI 128 cards -such as the es1370/1 (see the es1370/1 files in this directory) -as they do not automatically support uLaw on /dev/audio.] - -The status of the modules and which modules depend on -which other modules may be checked by: - /sbin/lsmod - -/sbin/lsmod should show something like the following: - sb 26280 0 - uart401 5640 0 [sb] - sound 57112 0 [sb uart401] - soundcore 1968 8 [sb sound] - - -Removing Sound: -=============== - -Sound may be removed by using /sbin/rmmod in the reverse order -in which you load the modules. Note, if a program has a sound device -open (e.g., xmixer), that module (and the modules on which it -depends) may not be unloaded. - -For example, I use the following to remove my Soundblaster (rmmod -in the reverse order in which I loaded the modules): - -/sbin/rmmod sb -/sbin/rmmod uart401 -/sbin/rmmod sound -/sbin/rmmod soundcore - -When using sound as a module, I typically put these commands -in a script such as /root/soundoff.sh. - - -Removing Sound for use with OSS: -================================ - -If you get really stuck or have a card that the kernel modules -will not support, you can get a commercial sound driver from -http://www.opensound.com. Before loading the commercial sound -driver, you should do the following: - -1. remove sound modules (detailed above) -2. remove the sound modules from /etc/modprobe.d/*.conf -3. move the sound modules from /lib/modules//misc - (for example, I make a /lib/modules//misc/tmp - directory and copy the sound module files to that - directory). - - -Multiple Sound Cards: -===================== - -The sound drivers will support multiple sound cards and there -are some great applications like multitrack that support them. -Typically, you need two sound cards of different types. Note, this -uses more precious interrupts and DMA channels and sometimes -can be a configuration nightmare. I have heard reports of 3-4 -sound cards (typically I only use 2). You can sometimes use -multiple PCI sound cards of the same type. - -On my machine I have two sound cards (cs4232 and Soundblaster Vibra -16). By loading sound as modules, I can control which is the first -sound device (/dev/dsp, /dev/audio, /dev/mixer) and which is -the second. Normally, the cs4232 (Dell sound on the motherboard) -would be the first sound device, but I prefer the Soundblaster. -All you have to do is to load the one you want as /dev/dsp -first (in my case "sb") and then load the other one -(in my case "cs4232"). - -If you have two cards of the same type that are jumpered -cards or different PnP revisions, you may load the same -module twice. For example, I have a SoundBlaster vibra 16 -and an older SoundBlaster 16 (jumpers). To load the module -twice, you need to do the following: - -1. Copy the sound modules to a new name. For example - sb.o could be copied (or symlinked) to sb1.o for the - second SoundBlaster. - -2. Make a second entry in /etc/modprobe.d/*conf, for example, - sound1 or sb1. This second entry should refer to the - new module names for example sb1, and should include - the I/O, etc. for the second sound card. - -3. Update your soundon.sh script, etc. - -Warning: I have never been able to get two PnP sound cards of the -same type to load at the same time. I have tried this several times -with the Soundblaster Vibra 16 cards. OSS has indicated that this -is a PnP problem.... If anyone has any luck doing this, please -send me an E-MAIL. PCI sound cards should not have this problem.a -Since this was originally release, I have received a couple of -mails from people who have accomplished this! - -NOTE: In Linux 2.4 the Sound Blaster driver (and only this one yet) -supports multiple cards with one module by default. -Read the file 'Soundblaster' in this directory for details. - - -Sound Problems: -=============== - -First RTFM (including the troubleshooting section -in the Sound-HOWTO). - -1) If you are having problems loading the modules (for - example, if you get device conflict errors) try the - following: - - A) If you have Win95 or NT on the same computer, - write down what addresses, IRQ, and DMA channels - those were using for the same hardware. You probably - can use these addresses, IRQs, and DMA channels. - You should really do this BEFORE attempting to get - sound working! - - B) Check (cat) /proc/interrupts, /proc/ioports, - and /proc/dma. Are you trying to use an address, - IRQ or DMA port that another device is using? - - C) Check (cat) /proc/isapnp - - D) Inspect your /var/log/messages file. Often that will - indicate what IRQ or IO port could not be obtained. - - E) Try another port or IRQ. Note this may involve - using the PnP tools to move the sound card to - another location. Sometimes this is the only way - and it is more or less trial and error. - -2) If you get motor-boating (the same sound or part of a - sound clip repeated), you probably have either an IRQ - or DMA conflict. Move the card to another IRQ or DMA - port. This has happened to me when playing long files - when I had an IRQ conflict. - -3. If you get dropouts or pauses when playing high sample - rate files such as using mpg123 or x11amp/xmms, you may - have too slow of a CPU and may have to use the options to - play the files at 1/2 speed. For example, you may use - the -2 or -4 option on mpg123. You may also get this - when trying to play mpeg files stored on a CD-ROM - (my Toshiba T8000 PII/366 sometimes has this problem). - -4. If you get "cannot access device" errors, your /dev/dsp - files, etc. may be set to owner root, mode 600. You - may have to use the command: - chmod 666 /dev/dsp /dev/mixer /dev/audio - -5. If you get "device busy" errors, another program has the - sound device open. For example, if using the Enlightenment - sound daemon "esd", the "esd" program has the sound device. - If using "esd", please RTFM the docs on ESD. For example, - esddsp may be used to play files via a non-esd - aware program. - -6) Ask for help on the sound list or send E-MAIL to the - sound driver author/maintainer. - -7) Turn on debug in drivers/sound/sound_config.h (DEB, DDB, MDB). - -8) If the system reports insufficient DMA memory then you may want to - load sound with the "dmabufs=1" option. Or in /etc/conf.modules add - - preinstall sound dmabufs=1 - - This makes the sound system allocate its buffers and hang onto them. - - You may also set persistent DMA when building a 2.4.x kernel. - - -Configuring Sound: -================== - -There are several ways of configuring your sound: - -1) On the kernel command line (when using the sound driver(s) - compiled in the kernel). Check the driver source and - documentation for details. - -2) On the command line when using insmod or in a bash script - using command line calls to load sound. - -3) In /etc/modprobe.d/*conf when using modprobe. - -4) Via Red Hat's GPL'd /usr/sbin/sndconfig program (text based). - -5) Via the OSS soundconf program (with the commercial version - of the OSS driver. - -6) By just loading the module and let isapnp do everything relevant - for you. This works only with a few drivers yet and - of course - - only with isapnp hardware. - -And I am sure, several other ways. - -Anyone want to write a linuxconf module for configuring sound? - - -Module Loading: -=============== - -When a sound card is first referenced and sound is modular, the sound system -will ask for the sound devices to be loaded. Initially it requests that -the driver for the sound system is loaded. It then will ask for -sound-slot-0, where 0 is the first sound card. (sound-slot-1 the second and -so on). Thus you can do - -alias sound-slot-0 sb - -To load a soundblaster at this point. If the slot loading does not provide -the desired device - for example a soundblaster does not directly provide -a midi synth in all cases then it will request "sound-service-0-n" where n -is - - 0 Mixer - - 2 MIDI - - 3, 4 DSP audio - - -For example, I use the following to load my Soundblaster PCI 128 -(ES 1371) card first, followed by my SoundBlaster Vibra 16 card, -then by my TV card: - -# Load the Soundblaster PCI 128 as /dev/dsp, /dev/dsp1, /dev/mixer -alias sound-slot-0 es1371 - -# Load the Soundblaster Vibra 16 as /dev/dsp2, /dev/mixer1 -alias sound-slot-1 sb -options sb io=0x240 irq=5 dma=1 dma16=5 mpu_io=0x330 - -# Load the BTTV (TV card) as /dev/mixer2 -alias sound-slot-2 bttv -alias sound-service-2-0 tvmixer - -pre-install bttv modprobe tuner ; modprobe tvmixer -pre-install tvmixer modprobe msp3400; modprobe tvaudio -options tuner debug=0 type=8 -options bttv card=0 radio=0 pll=0 - - -For More Information (RTFM): -============================ -1) Information on kernel modules: manual pages for insmod and modprobe. - -2) Information on PnP, RTFM manual pages for isapnp. - -3) Sound-HOWTO and Sound-Playing-HOWTO. - -4) OSS's WWW site at http://www.opensound.com. - -5) All the files in Documentation/sound. - -6) The comments and code in linux/drivers/sound. - -7) The sndconfig and rhsound documentation from Red Hat. - -8) The Linux-sound mailing list: sound-list@redhat.com. - -9) Enlightenment documentation (for info on esd) - http://www.tux.org/~ricdude/EsounD.html. - -10) ALSA home page: http://www.alsa-project.org/ - - -Contact Information: -==================== -Wade Hampton: (whampton@staffnet.com) - diff --git a/Documentation/sound/oss/MultiSound b/Documentation/sound/oss/MultiSound deleted file mode 100644 index e4a18bb7f73acd0fa1e5c3ee1f1ffd7e36853f17..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/MultiSound +++ /dev/null @@ -1,1137 +0,0 @@ -#! /bin/sh -# -# Turtle Beach MultiSound Driver Notes -# -- Andrew Veliath -# -# Last update: September 10, 1998 -# Corresponding msnd driver: 0.8.3 -# -# ** This file is a README (top part) and shell archive (bottom part). -# The corresponding archived utility sources can be unpacked by -# running `sh MultiSound' (the utilities are only needed for the -# Pinnacle and Fiji cards). ** -# -# -# -=-=- Getting Firmware -=-=- -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# See the section `Obtaining and Creating Firmware Files' in this -# document for instructions on obtaining the necessary firmware -# files. -# -# -# Supported Features -# ~~~~~~~~~~~~~~~~~~ -# -# Currently, full-duplex digital audio (/dev/dsp only, /dev/audio is -# not currently available) and mixer functionality (/dev/mixer) are -# supported (memory mapped digital audio is not yet supported). -# Digital transfers and monitoring can be done as well if you have -# the digital daughterboard (see the section on using the S/PDIF port -# for more information). -# -# Support for the Turtle Beach MultiSound Hurricane architecture is -# composed of the following modules (these can also operate compiled -# into the kernel): -# -# msnd - MultiSound base (requires soundcore) -# -# msnd_classic - Base audio/mixer support for Classic, Monetery and -# Tahiti cards -# -# msnd_pinnacle - Base audio/mixer support for Pinnacle and Fiji cards -# -# -# Important Notes - Read Before Using -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# The firmware files are not included (may change in future). You -# must obtain these images from Turtle Beach (they are included in -# the MultiSound Development Kits), and place them in /etc/sound for -# example, and give the full paths in the Linux configuration. If -# you are compiling in support for the MultiSound driver rather than -# using it as a module, these firmware files must be accessible -# during kernel compilation. -# -# Please note these files must be binary files, not assembler. See -# the section later in this document for instructions to obtain these -# files. -# -# -# Configuring Card Resources -# ~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# ** This section is very important, as your card may not work at all -# or your machine may crash if you do not do this correctly. ** -# -# * Classic/Monterey/Tahiti -# -# These cards are configured through the driver msnd_classic. You must -# know the io port, then the driver will select the irq and memory resources -# on the card. It is up to you to know if these are free locations or now, -# a conflict can lock the machine up. -# -# * Pinnacle/Fiji -# -# The Pinnacle and Fiji cards have an extra config port, either -# 0x250, 0x260 or 0x270. This port can be disabled to have the card -# configured strictly through PnP, however you lose the ability to -# access the IDE controller and joystick devices on this card when -# using PnP. The included pinnaclecfg program in this shell archive -# can be used to configure the card in non-PnP mode, and in PnP mode -# you can use isapnptools. These are described briefly here. -# -# pinnaclecfg is not required; you can use the msnd_pinnacle module -# to fully configure the card as well. However, pinnaclecfg can be -# used to change the resource values of a particular device after the -# msnd_pinnacle module has been loaded. If you are compiling the -# driver into the kernel, you must set these values during compile -# time, however other peripheral resource values can be changed with -# the pinnaclecfg program after the kernel is loaded. -# -# -# *** PnP mode -# -# Use pnpdump to obtain a sample configuration if you can; I was able -# to obtain one with the command `pnpdump 1 0x203' -- this may vary -# for you (running pnpdump by itself did not work for me). Then, -# edit this file and use isapnp to uncomment and set the card values. -# Use these values when inserting the msnd_pinnacle module. Using -# this method, you can set the resources for the DSP and the Kurzweil -# synth (Pinnacle). Since Linux does not directly support PnP -# devices, you may have difficulty when using the card in PnP mode -# when it the driver is compiled into the kernel. Using non-PnP mode -# is preferable in this case. -# -# Here is an example mypinnacle.conf for isapnp that sets the card to -# io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil -# synth to 0x330 and irq 9 (may need editing for your system): -# -# (READPORT 0x0203) -# (CSN 2) -# (IDENTIFY *) -# -# # DSP -# (CONFIGURE BVJ0440/-1 (LD 0 -# (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000)) -# (ACT Y))) -# -# # Kurzweil Synth (Pinnacle Only) -# (CONFIGURE BVJ0440/-1 (LD 1 -# (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E))) -# (ACT Y))) -# -# (WAITFORKEY) -# -# -# *** Non-PnP mode -# -# The second way is by running the card in non-PnP mode. This -# actually has some advantages in that you can access some other -# devices on the card, such as the joystick and IDE controller. To -# configure the card, unpack this shell archive and build the -# pinnaclecfg program. Using this program, you can assign the -# resource values to the card's devices, or disable the devices. As -# an alternative to using pinnaclecfg, you can specify many of the -# configuration values when loading the msnd_pinnacle module (or -# during kernel configuration when compiling the driver into the -# kernel). -# -# If you specify cfg=0x250 for the msnd_pinnacle module, it -# automatically configure the card to the given io, irq and memory -# values using that config port (the config port is jumper selectable -# on the card to 0x250, 0x260 or 0x270). -# -# See the `msnd_pinnacle Additional Options' section below for more -# information on these parameters (also, if you compile the driver -# directly into the kernel, these extra parameters can be useful -# here). -# -# -# ** It is very easy to cause problems in your machine if you choose a -# resource value which is incorrect. ** -# -# -# Examples -# ~~~~~~~~ -# -# * MultiSound Classic/Monterey/Tahiti: -# -# modprobe soundcore -# insmod msnd -# insmod msnd_classic io=0x290 irq=7 mem=0xd0000 -# -# * MultiSound Pinnacle in PnP mode: -# -# modprobe soundcore -# insmod msnd -# isapnp mypinnacle.conf -# insmod msnd_pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values -# -# * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port, -# one of 0x250, 0x260 or 0x270): -# -# insmod soundcore -# insmod msnd -# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 -# -# * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP -# mode, add the following (assumes you did `isapnp mypinnacle.conf'): -# -# insmod sound -# insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values -# -# * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP -# mode, add the following. Note how we first configure the peripheral's -# resources, _then_ install a Linux driver for it: -# -# insmod sound -# pinnaclecfg 0x250 mpu 0x330 9 -# insmod mpu401 io=0x330 irq=9 -# -# -- OR you can use the following sequence without pinnaclecfg in non-PnP mode: -# -# insmod soundcore -# insmod msnd -# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9 -# insmod sound -# insmod mpu401 io=0x330 irq=9 -# -# * To setup the joystick port on the Pinnacle in non-PnP mode (though -# you have to find the actual Linux joystick driver elsewhere), you -# can use pinnaclecfg: -# -# pinnaclecfg 0x250 joystick 0x200 -# -# -- OR you can configure this using msnd_pinnacle with the following: -# -# insmod soundcore -# insmod msnd -# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200 -# -# -# msnd_classic, msnd_pinnacle Required Options -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# If the following options are not given, the module will not load. -# Examine the kernel message log for informative error messages. -# WARNING--probing isn't supported so try to make sure you have the -# correct shared memory area, otherwise you may experience problems. -# -# io I/O base of DSP, e.g. io=0x210 -# irq IRQ number, e.g. irq=5 -# mem Shared memory area, e.g. mem=0xd8000 -# -# -# msnd_classic, msnd_pinnacle Additional Options -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# fifosize The digital audio FIFOs, in kilobytes. If not -# specified, the default will be used. Increasing -# this value will reduce the chance of a FIFO -# underflow at the expense of increasing overall -# latency. For example, fifosize=512 will -# allocate 512kB read and write FIFOs (1MB total). -# While this may reduce dropouts, a heavy machine -# load will undoubtedly starve the FIFO of data -# and you will eventually get dropouts. One -# option is to alter the scheduling priority of -# the playback process, using `nice' or some form -# of POSIX soft real-time scheduling. -# -# calibrate_signal Setting this to one calibrates the ADCs to the -# signal, zero calibrates to the card (defaults -# to zero). -# -# -# msnd_pinnacle Additional Options -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# digital Specify digital=1 to enable the S/PDIF input -# if you have the digital daughterboard -# adapter. This will enable access to the -# DIGITAL1 input for the soundcard in the mixer. -# Some mixer programs might have trouble setting -# the DIGITAL1 source as an input. If you have -# trouble, you can try the setdigital.c program -# at the bottom of this document. -# -# cfg Non-PnP configuration port for the Pinnacle -# and Fiji (typically 0x250, 0x260 or 0x270, -# depending on the jumper configuration). If -# this option is omitted, then it is assumed -# that the card is in PnP mode, and that the -# specified DSP resource values are already -# configured with PnP (i.e. it won't attempt to -# do any sort of configuration). -# -# When the Pinnacle is in non-PnP mode, you can use the following -# options to configure particular devices. If a full specification -# for a device is not given, then the device is not configured. Note -# that you still must use a Linux driver for any of these devices -# once their resources are setup (such as the Linux joystick driver, -# or the MPU401 driver from OSS for the Kurzweil synth). -# -# mpu_io I/O port of MPU (on-board Kurzweil synth) -# mpu_irq IRQ of MPU (on-board Kurzweil synth) -# ide_io0 First I/O port of IDE controller -# ide_io1 Second I/O port of IDE controller -# ide_irq IRQ IDE controller -# joystick_io I/O port of joystick -# -# -# Obtaining and Creating Firmware Files -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# For the Classic/Tahiti/Monterey -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# Download to /tmp and unzip the following file from Turtle Beach: -# -# ftp://ftp.voyetra.com/pub/tbs/msndcl/msndvkit.zip -# -# When unzipped, unzip the file named MsndFiles.zip. Then copy the -# following firmware files to /etc/sound (note the file renaming): -# -# cp DSPCODE/MSNDINIT.BIN /etc/sound/msndinit.bin -# cp DSPCODE/MSNDPERM.REB /etc/sound/msndperm.bin -# -# When configuring the Linux kernel, specify /etc/sound/msndinit.bin and -# /etc/sound/msndperm.bin for the two firmware files (Linux kernel -# versions older than 2.2 do not ask for firmware paths, and are -# hardcoded to /etc/sound). -# -# If you are compiling the driver into the kernel, these files must -# be accessible during compilation, but will not be needed later. -# The files must remain, however, if the driver is used as a module. -# -# -# For the Pinnacle/Fiji -# ~~~~~~~~~~~~~~~~~~~~~ -# -# Download to /tmp and unzip the following file from Turtle Beach (be -# sure to use the entire URL; some have had trouble navigating to the -# URL): -# -# ftp://ftp.voyetra.com/pub/tbs/pinn/pnddk100.zip -# -# Unpack this shell archive, and run make in the created directory -# (you need a C compiler and flex to build the utilities). This -# should give you the executables conv, pinnaclecfg and setdigital. -# conv is only used temporarily here to create the firmware files, -# while pinnaclecfg is used to configure the Pinnacle or Fiji card in -# non-PnP mode, and setdigital can be used to set the S/PDIF input on -# the mixer (pinnaclecfg and setdigital should be copied to a -# convenient place, possibly run during system initialization). -# -# To generating the firmware files with the `conv' program, we create -# the binary firmware files by doing the following conversion -# (assuming the archive unpacked into a directory named PINNDDK): -# -# ./conv < PINNDDK/dspcode/pndspini.asm > /etc/sound/pndspini.bin -# ./conv < PINNDDK/dspcode/pndsperm.asm > /etc/sound/pndsperm.bin -# -# The conv (and conv.l) program is not needed after conversion and can -# be safely deleted. Then, when configuring the Linux kernel, specify -# /etc/sound/pndspini.bin and /etc/sound/pndsperm.bin for the two -# firmware files (Linux kernel versions older than 2.2 do not ask for -# firmware paths, and are hardcoded to /etc/sound). -# -# If you are compiling the driver into the kernel, these files must -# be accessible during compilation, but will not be needed later. -# The files must remain, however, if the driver is used as a module. -# -# -# Using Digital I/O with the S/PDIF Port -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# If you have a Pinnacle or Fiji with the digital daughterboard and -# want to set it as the input source, you can use this program if you -# have trouble trying to do it with a mixer program (be sure to -# insert the module with the digital=1 option, or say Y to the option -# during compiled-in kernel operation). Upon selection of the S/PDIF -# port, you should be able monitor and record from it. -# -# There is something to note about using the S/PDIF port. Digital -# timing is taken from the digital signal, so if a signal is not -# connected to the port and it is selected as recording input, you -# will find PCM playback to be distorted in playback rate. Also, -# attempting to record at a sampling rate other than the DAT rate may -# be problematic (i.e. trying to record at 8000Hz when the DAT signal -# is 44100Hz). If you have a problem with this, set the recording -# input to analog if you need to record at a rate other than that of -# the DAT rate. -# -# -# -- Shell archive attached below, just run `sh MultiSound' to extract. -# Contains Pinnacle/Fiji utilities to convert firmware, configure -# in non-PnP mode, and select the DIGITAL1 input for the mixer. -# -# -#!/bin/sh -# This is a shell archive (produced by GNU sharutils 4.2). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. -# -# Made on 1998-12-04 10:07 EST by . -# Source directory was `/home/andrewtv/programming/pinnacle/pinnacle'. -# -# Existing files will *not* be overwritten unless `-c' is specified. -# -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 2046 -rw-rw-r-- MultiSound.d/setdigital.c -# 10235 -rw-rw-r-- MultiSound.d/pinnaclecfg.c -# 106 -rw-rw-r-- MultiSound.d/Makefile -# 141 -rw-rw-r-- MultiSound.d/conv.l -# 1472 -rw-rw-r-- MultiSound.d/msndreset.c -# -save_IFS="${IFS}" -IFS="${IFS}:" -gettext_dir=FAILED -locale_dir=FAILED -first_param="$1" -for dir in $PATH -do - if test "$gettext_dir" = FAILED && test -f $dir/gettext \ - && ($dir/gettext --version >/dev/null 2>&1) - then - set `$dir/gettext --version 2>&1` - if test "$3" = GNU - then - gettext_dir=$dir - fi - fi - if test "$locale_dir" = FAILED && test -f $dir/shar \ - && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) - then - locale_dir=`$dir/shar --print-text-domain-dir` - fi -done -IFS="$save_IFS" -if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED -then - echo=echo -else - TEXTDOMAINDIR=$locale_dir - export TEXTDOMAINDIR - TEXTDOMAIN=sharutils - export TEXTDOMAIN - echo="$gettext_dir/gettext -s" -fi -touch -am 1231235999 $$.touch >/dev/null 2>&1 -if test ! -f 1231235999 && test -f $$.touch; then - shar_touch=touch -else - shar_touch=: - echo - $echo 'WARNING: not restoring timestamps. Consider getting and' - $echo "installing GNU \`touch', distributed in GNU File Utilities..." - echo -fi -rm -f 1231235999 $$.touch -# -if mkdir _sh01426; then - $echo 'x -' 'creating lock directory' -else - $echo 'failed to create lock directory' - exit 1 -fi -# ============= MultiSound.d/setdigital.c ============== -if test ! -d 'MultiSound.d'; then - $echo 'x -' 'creating directory' 'MultiSound.d' - mkdir 'MultiSound.d' -fi -if test -f 'MultiSound.d/setdigital.c' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/setdigital.c' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/setdigital.c' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/setdigital.c' && -/********************************************************************* -X * -X * setdigital.c - sets the DIGITAL1 input for a mixer -X * -X * Copyright (C) 1998 Andrew Veliath -X * -X * This program is free software; you can redistribute it and/or modify -X * it under the terms of the GNU General Public License as published by -X * the Free Software Foundation; either version 2 of the License, or -X * (at your option) any later version. -X * -X * This program is distributed in the hope that it will be useful, -X * but WITHOUT ANY WARRANTY; without even the implied warranty of -X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -X * GNU General Public License for more details. -X * -X * You should have received a copy of the GNU General Public License -X * along with this program; if not, write to the Free Software -X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -X * -X ********************************************************************/ -X -#include -#include -#include -#include -#include -#include -#include -X -int main(int argc, char *argv[]) -{ -X int fd; -X unsigned long recmask, recsrc; -X -X if (argc != 2) { -X fprintf(stderr, "usage: setdigital \n"); -X exit(1); -X } -X -X if ((fd = open(argv[1], O_RDWR)) < 0) { -X perror(argv[1]); -X exit(1); -X } -X -X if (ioctl(fd, SOUND_MIXER_READ_RECMASK, &recmask) < 0) { -X fprintf(stderr, "error: ioctl read recording mask failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X if (!(recmask & SOUND_MASK_DIGITAL1)) { -X fprintf(stderr, "error: cannot find DIGITAL1 device in mixer\n"); -X close(fd); -X exit(1); -X } -X -X if (ioctl(fd, SOUND_MIXER_READ_RECSRC, &recsrc) < 0) { -X fprintf(stderr, "error: ioctl read recording source failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X recsrc |= SOUND_MASK_DIGITAL1; -X -X if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC, &recsrc) < 0) { -X fprintf(stderr, "error: ioctl write recording source failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X close(fd); -X -X return 0; -} -SHAR_EOF - $shar_touch -am 1204092598 'MultiSound.d/setdigital.c' && - chmod 0664 'MultiSound.d/setdigital.c' || - $echo 'restore of' 'MultiSound.d/setdigital.c' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/setdigital.c:' 'MD5 check failed' -e87217fc3e71288102ba41fd81f71ec4 MultiSound.d/setdigital.c -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/setdigital.c'`" - test 2046 -eq "$shar_count" || - $echo 'MultiSound.d/setdigital.c:' 'original size' '2046,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/pinnaclecfg.c ============== -if test -f 'MultiSound.d/pinnaclecfg.c' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/pinnaclecfg.c' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/pinnaclecfg.c' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/pinnaclecfg.c' && -/********************************************************************* -X * -X * pinnaclecfg.c - Pinnacle/Fiji Device Configuration Program -X * -X * This is for NON-PnP mode only. For PnP mode, use isapnptools. -X * -X * This is Linux-specific, and must be run with root permissions. -X * -X * Part of the Turtle Beach MultiSound Sound Card Driver for Linux -X * -X * Copyright (C) 1998 Andrew Veliath -X * -X * This program is free software; you can redistribute it and/or modify -X * it under the terms of the GNU General Public License as published by -X * the Free Software Foundation; either version 2 of the License, or -X * (at your option) any later version. -X * -X * This program is distributed in the hope that it will be useful, -X * but WITHOUT ANY WARRANTY; without even the implied warranty of -X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -X * GNU General Public License for more details. -X * -X * You should have received a copy of the GNU General Public License -X * along with this program; if not, write to the Free Software -X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -X * -X ********************************************************************/ -X -#include -#include -#include -#include -#include -#include -#include -X -#define IREG_LOGDEVICE 0x07 -#define IREG_ACTIVATE 0x30 -#define LD_ACTIVATE 0x01 -#define LD_DISACTIVATE 0x00 -#define IREG_EECONTROL 0x3F -#define IREG_MEMBASEHI 0x40 -#define IREG_MEMBASELO 0x41 -#define IREG_MEMCONTROL 0x42 -#define IREG_MEMRANGEHI 0x43 -#define IREG_MEMRANGELO 0x44 -#define MEMTYPE_8BIT 0x00 -#define MEMTYPE_16BIT 0x02 -#define MEMTYPE_RANGE 0x00 -#define MEMTYPE_HIADDR 0x01 -#define IREG_IO0_BASEHI 0x60 -#define IREG_IO0_BASELO 0x61 -#define IREG_IO1_BASEHI 0x62 -#define IREG_IO1_BASELO 0x63 -#define IREG_IRQ_NUMBER 0x70 -#define IREG_IRQ_TYPE 0x71 -#define IRQTYPE_HIGH 0x02 -#define IRQTYPE_LOW 0x00 -#define IRQTYPE_LEVEL 0x01 -#define IRQTYPE_EDGE 0x00 -X -#define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF)) -#define LOBYTE(w) ((BYTE)(w)) -#define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8))) -X -typedef __u8 BYTE; -typedef __u16 USHORT; -typedef __u16 WORD; -X -static int config_port = -1; -X -static int msnd_write_cfg(int cfg, int reg, int value) -{ -X outb(reg, cfg); -X outb(value, cfg + 1); -X if (value != inb(cfg + 1)) { -X fprintf(stderr, "error: msnd_write_cfg: I/O error\n"); -X return -EIO; -X } -X return 0; -} -X -static int msnd_read_cfg(int cfg, int reg) -{ -X outb(reg, cfg); -X return inb(cfg + 1); -} -X -static int msnd_write_cfg_io0(int cfg, int num, WORD io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io))) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_io0(int cfg, int num, WORD *io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO0_BASELO), -X msnd_read_cfg(cfg, IREG_IO0_BASEHI)); -X -X return 0; -} -X -static int msnd_write_cfg_io1(int cfg, int num, WORD io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io))) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_io1(int cfg, int num, WORD *io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO1_BASELO), -X msnd_read_cfg(cfg, IREG_IO1_BASEHI)); -X -X return 0; -} -X -static int msnd_write_cfg_irq(int cfg, int num, WORD irq) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE)) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_irq(int cfg, int num, WORD *irq) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *irq = msnd_read_cfg(cfg, IREG_IRQ_NUMBER); -X -X return 0; -} -X -static int msnd_write_cfg_mem(int cfg, int num, int mem) -{ -X WORD wmem; -X -X mem >>= 8; -X mem &= 0xfff; -X wmem = (WORD)mem; -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem))) -X return -EIO; -X if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT))) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_mem(int cfg, int num, int *mem) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *mem = MAKEWORD(msnd_read_cfg(cfg, IREG_MEMBASELO), -X msnd_read_cfg(cfg, IREG_MEMBASEHI)); -X *mem <<= 8; -X -X return 0; -} -X -static int msnd_activate_logical(int cfg, int num) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE)) -X return -EIO; -X return 0; -} -X -static int msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg_io0(cfg, num, io0)) -X return -EIO; -X if (msnd_write_cfg_io1(cfg, num, io1)) -X return -EIO; -X if (msnd_write_cfg_irq(cfg, num, irq)) -X return -EIO; -X if (msnd_write_cfg_mem(cfg, num, mem)) -X return -EIO; -X if (msnd_activate_logical(cfg, num)) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_logical(int cfg, int num, WORD *io0, WORD *io1, WORD *irq, int *mem) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_read_cfg_io0(cfg, num, io0)) -X return -EIO; -X if (msnd_read_cfg_io1(cfg, num, io1)) -X return -EIO; -X if (msnd_read_cfg_irq(cfg, num, irq)) -X return -EIO; -X if (msnd_read_cfg_mem(cfg, num, mem)) -X return -EIO; -X return 0; -} -X -static void usage(void) -{ -X fprintf(stderr, -X "\n" -X "pinnaclecfg 1.0\n" -X "\n" -X "usage: pinnaclecfg [device config]\n" -X "\n" -X "This is for use with the card in NON-PnP mode only.\n" -X "\n" -X "Available devices (not all available for Fiji):\n" -X "\n" -X " Device Description\n" -X " -------------------------------------------------------------------\n" -X " reset Reset all devices (i.e. disable)\n" -X " show Display current device configurations\n" -X "\n" -X " dsp Audio device\n" -X " mpu Internal Kurzweil synth\n" -X " ide On-board IDE controller\n" -X " joystick Joystick port\n" -X "\n"); -X exit(1); -} -X -static int cfg_reset(void) -{ -X int i; -X -X for (i = 0; i < 4; ++i) -X msnd_write_cfg_logical(config_port, i, 0, 0, 0, 0); -X -X return 0; -} -X -static int cfg_show(void) -{ -X int i; -X int count = 0; -X -X for (i = 0; i < 4; ++i) { -X WORD io0, io1, irq; -X int mem; -X msnd_read_cfg_logical(config_port, i, &io0, &io1, &irq, &mem); -X switch (i) { -X case 0: -X if (io0 || irq || mem) { -X printf("dsp 0x%x %d 0x%x\n", io0, irq, mem); -X ++count; -X } -X break; -X case 1: -X if (io0 || irq) { -X printf("mpu 0x%x %d\n", io0, irq); -X ++count; -X } -X break; -X case 2: -X if (io0 || io1 || irq) { -X printf("ide 0x%x 0x%x %d\n", io0, io1, irq); -X ++count; -X } -X break; -X case 3: -X if (io0) { -X printf("joystick 0x%x\n", io0); -X ++count; -X } -X break; -X } -X } -X -X if (count == 0) -X fprintf(stderr, "no devices configured\n"); -X -X return 0; -} -X -static int cfg_dsp(int argc, char *argv[]) -{ -X int io, irq, mem; -X -X if (argc < 3 || -X sscanf(argv[0], "0x%x", &io) != 1 || -X sscanf(argv[1], "%d", &irq) != 1 || -X sscanf(argv[2], "0x%x", &mem) != 1) -X usage(); -X -X if (!(io == 0x290 || -X io == 0x260 || -X io == 0x250 || -X io == 0x240 || -X io == 0x230 || -X io == 0x220 || -X io == 0x210 || -X io == 0x3e0)) { -X fprintf(stderr, "error: io must be one of " -X "210, 220, 230, 240, 250, 260, 290, or 3E0\n"); -X usage(); -X } -X -X if (!(irq == 5 || -X irq == 7 || -X irq == 9 || -X irq == 10 || -X irq == 11 || -X irq == 12)) { -X fprintf(stderr, "error: irq must be one of " -X "5, 7, 9, 10, 11 or 12\n"); -X usage(); -X } -X -X if (!(mem == 0xb0000 || -X mem == 0xc8000 || -X mem == 0xd0000 || -X mem == 0xd8000 || -X mem == 0xe0000 || -X mem == 0xe8000)) { -X fprintf(stderr, "error: mem must be one of " -X "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n"); -X usage(); -X } -X -X return msnd_write_cfg_logical(config_port, 0, io, 0, irq, mem); -} -X -static int cfg_mpu(int argc, char *argv[]) -{ -X int io, irq; -X -X if (argc < 2 || -X sscanf(argv[0], "0x%x", &io) != 1 || -X sscanf(argv[1], "%d", &irq) != 1) -X usage(); -X -X return msnd_write_cfg_logical(config_port, 1, io, 0, irq, 0); -} -X -static int cfg_ide(int argc, char *argv[]) -{ -X int io0, io1, irq; -X -X if (argc < 3 || -X sscanf(argv[0], "0x%x", &io0) != 1 || -X sscanf(argv[0], "0x%x", &io1) != 1 || -X sscanf(argv[1], "%d", &irq) != 1) -X usage(); -X -X return msnd_write_cfg_logical(config_port, 2, io0, io1, irq, 0); -} -X -static int cfg_joystick(int argc, char *argv[]) -{ -X int io; -X -X if (argc < 1 || -X sscanf(argv[0], "0x%x", &io) != 1) -X usage(); -X -X return msnd_write_cfg_logical(config_port, 3, io, 0, 0, 0); -} -X -int main(int argc, char *argv[]) -{ -X char *device; -X int rv = 0; -X -X --argc; ++argv; -X -X if (argc < 2) -X usage(); -X -X sscanf(argv[0], "0x%x", &config_port); -X if (config_port != 0x250 && config_port != 0x260 && config_port != 0x270) { -X fprintf(stderr, "error: must be 0x250, 0x260 or 0x270\n"); -X exit(1); -X } -X if (ioperm(config_port, 2, 1)) { -X perror("ioperm"); -X fprintf(stderr, "note: pinnaclecfg must be run as root\n"); -X exit(1); -X } -X device = argv[1]; -X -X argc -= 2; argv += 2; -X -X if (strcmp(device, "reset") == 0) -X rv = cfg_reset(); -X else if (strcmp(device, "show") == 0) -X rv = cfg_show(); -X else if (strcmp(device, "dsp") == 0) -X rv = cfg_dsp(argc, argv); -X else if (strcmp(device, "mpu") == 0) -X rv = cfg_mpu(argc, argv); -X else if (strcmp(device, "ide") == 0) -X rv = cfg_ide(argc, argv); -X else if (strcmp(device, "joystick") == 0) -X rv = cfg_joystick(argc, argv); -X else { -X fprintf(stderr, "error: unknown device %s\n", device); -X usage(); -X } -X -X if (rv) -X fprintf(stderr, "error: device configuration failed\n"); -X -X return 0; -} -SHAR_EOF - $shar_touch -am 1204092598 'MultiSound.d/pinnaclecfg.c' && - chmod 0664 'MultiSound.d/pinnaclecfg.c' || - $echo 'restore of' 'MultiSound.d/pinnaclecfg.c' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/pinnaclecfg.c:' 'MD5 check failed' -366bdf27f0db767a3c7921d0a6db20fe MultiSound.d/pinnaclecfg.c -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/pinnaclecfg.c'`" - test 10235 -eq "$shar_count" || - $echo 'MultiSound.d/pinnaclecfg.c:' 'original size' '10235,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/Makefile ============== -if test -f 'MultiSound.d/Makefile' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/Makefile' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/Makefile' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/Makefile' && -CC = gcc -CFLAGS = -O -PROGS = setdigital msndreset pinnaclecfg conv -X -all: $(PROGS) -X -clean: -X rm -f $(PROGS) -SHAR_EOF - $shar_touch -am 1204092398 'MultiSound.d/Makefile' && - chmod 0664 'MultiSound.d/Makefile' || - $echo 'restore of' 'MultiSound.d/Makefile' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/Makefile:' 'MD5 check failed' -76ca8bb44e3882edcf79c97df6c81845 MultiSound.d/Makefile -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/Makefile'`" - test 106 -eq "$shar_count" || - $echo 'MultiSound.d/Makefile:' 'original size' '106,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/conv.l ============== -if test -f 'MultiSound.d/conv.l' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/conv.l' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/conv.l' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/conv.l' && -%% -[ \n\t,\r] -\;.* -DB -[0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH", &n); printf("%c", n); } -%% -int yywrap() { return 1; } -main() { yylex(); } -SHAR_EOF - $shar_touch -am 0828231798 'MultiSound.d/conv.l' && - chmod 0664 'MultiSound.d/conv.l' || - $echo 'restore of' 'MultiSound.d/conv.l' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/conv.l:' 'MD5 check failed' -d2411fc32cd71a00dcdc1f009e858dd2 MultiSound.d/conv.l -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/conv.l'`" - test 141 -eq "$shar_count" || - $echo 'MultiSound.d/conv.l:' 'original size' '141,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/msndreset.c ============== -if test -f 'MultiSound.d/msndreset.c' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/msndreset.c' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/msndreset.c' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/msndreset.c' && -/********************************************************************* -X * -X * msndreset.c - resets the MultiSound card -X * -X * Copyright (C) 1998 Andrew Veliath -X * -X * This program is free software; you can redistribute it and/or modify -X * it under the terms of the GNU General Public License as published by -X * the Free Software Foundation; either version 2 of the License, or -X * (at your option) any later version. -X * -X * This program is distributed in the hope that it will be useful, -X * but WITHOUT ANY WARRANTY; without even the implied warranty of -X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -X * GNU General Public License for more details. -X * -X * You should have received a copy of the GNU General Public License -X * along with this program; if not, write to the Free Software -X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -X * -X ********************************************************************/ -X -#include -#include -#include -#include -#include -#include -#include -X -int main(int argc, char *argv[]) -{ -X int fd; -X -X if (argc != 2) { -X fprintf(stderr, "usage: msndreset \n"); -X exit(1); -X } -X -X if ((fd = open(argv[1], O_RDWR)) < 0) { -X perror(argv[1]); -X exit(1); -X } -X -X if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0) < 0) { -X fprintf(stderr, "error: msnd ioctl reset failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X close(fd); -X -X return 0; -} -SHAR_EOF - $shar_touch -am 1204100698 'MultiSound.d/msndreset.c' && - chmod 0664 'MultiSound.d/msndreset.c' || - $echo 'restore of' 'MultiSound.d/msndreset.c' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/msndreset.c:' 'MD5 check failed' -c52f876521084e8eb25e12e01dcccb8a MultiSound.d/msndreset.c -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/msndreset.c'`" - test 1472 -eq "$shar_count" || - $echo 'MultiSound.d/msndreset.c:' 'original size' '1472,' 'current size' "$shar_count!" - fi -fi -rm -fr _sh01426 -exit 0 diff --git a/Documentation/sound/oss/OPL3 b/Documentation/sound/oss/OPL3 deleted file mode 100644 index 2468ff82768841481137b9e140c5a4cb795b381e..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/OPL3 +++ /dev/null @@ -1,6 +0,0 @@ -A pure OPL3 card is nice and easy to configure. Simply do - -insmod opl3 io=0x388 - -Change the I/O address in the very unlikely case this card is differently -configured diff --git a/Documentation/sound/oss/Opti b/Documentation/sound/oss/Opti deleted file mode 100644 index 4cd5d9ab35803c827ac89c6410d5d2e5fb7c5c3e..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/Opti +++ /dev/null @@ -1,218 +0,0 @@ -Support for the OPTi 82C931 chip --------------------------------- -Note: parts of this README file apply also to other -cards that use the mad16 driver. - -Some items in this README file are based on features -added to the sound driver after Linux-2.1.91 was out. -By the time of writing this I do not know which official -kernel release will include these features. -Please do not report inconsistencies on older Linux -kernels. - -The OPTi 82C931 is supported in its non-PnP mode. -Usually you do not need to set jumpers, etc. The sound driver -will check the card status and if it is required it will -force the card into a mode in which it can be programmed. - -If you have another OS installed on your computer it is recommended -that Linux and the other OS use the same resources. - -Also, it is recommended that resources specified in /etc/modprobe.d/*.conf -and resources specified in /etc/isapnp.conf agree. - -Compiling the sound driver --------------------------- -I highly recommend that you build a modularized sound driver. -This document does not cover a sound-driver which is built in -the kernel. - -Sound card support should be enabled as a module (chose m). -Answer 'm' for these items: - Generic OPL2/OPL3 FM synthesizer support (CONFIG_SOUND_ADLIB) - Microsoft Sound System support (CONFIG_SOUND_MSS) - Support for OPTi MAD16 and/or Mozart based cards (CONFIG_SOUND_MAD16) - FM synthesizer (YM3812/OPL-3) support (CONFIG_SOUND_YM3812) - -The configuration menu may ask for addresses, IRQ lines or DMA -channels. If the card is used as a module the module loading -options will override these values. - -For the OPTi 931 you can answer 'n' to: - Support MIDI in older MAD16 based cards (requires SB) (CONFIG_SOUND_MAD16_OLDCARD) -If you do need MIDI support in a Mozart or C928 based card you -need to answer 'm' to the above question. In that case you will -also need to answer 'm' to: - '100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' (CONFIG_SOUND_SB) - -Go on and compile your kernel and modules. Install the modules. Run depmod -a. - -Using isapnptools ------------------ -In most systems with a PnP BIOS you do not need to use isapnp. The -initialization provided by the BIOS is sufficient for the driver -to pick up the card and continue initialization. - -If that fails, or if you have other PnP cards, you need to use isapnp -to initialize the card. -This was tested with isapnptools-1.11 but I recommend that you use -isapnptools-1.13 (or newer). Run pnpdump to dump the information -about your PnP cards. Then edit the resulting file and select -the options of your choice. This file is normally installed as -/etc/isapnp.conf. - -The driver has one limitation with respect to I/O port resources: -IO3 base must be 0x0E0C. Although isapnp allows other ports, this -address is hard-coded into the driver. - -Using kmod and autoloading the sound driver -------------------------------------------- -Config files in '/etc/modprobe.d/' are used as below: - -alias mixer0 mad16 -alias audio0 mad16 -alias midi0 mad16 -alias synth0 opl3 -options sb mad16=1 -options mad16 irq=10 dma=0 dma16=1 io=0x530 joystick=1 cdtype=0 -options opl3 io=0x388 -install mad16 /sbin/modprobe -i mad16 && /sbin/ad1848_mixer_reroute 14 8 15 3 16 6 - -If you have an MPU daughtercard or onboard MPU you will want to add to the -"options mad16" line - eg - -options mad16 irq=5 dma=0 dma16=3 io=0x530 mpu_io=0x330 mpu_irq=9 - -To set the I/O and IRQ of the MPU. - - -Explain: - -alias mixer0 mad16 -alias audio0 mad16 -alias midi0 mad16 -alias synth0 opl3 - -When any sound device is opened the kernel requests auto-loading -of char-major-14. There is a built-in alias that translates this -request to loading the main sound module. - -The sound module in its turn will request loading of a sub-driver -for mixer, audio, midi or synthesizer device. The first 3 are -supported by the mad16 driver. The synth device is supported -by the opl3 driver. - -There is currently no way to autoload the sound device driver -if more than one card is installed. - -options sb mad16=1 - -This is left for historical reasons. If you enable the -config option 'Support MIDI in older MAD16 based cards (requires SB)' -or if you use an older mad16 driver it will force loading of the -SoundBlaster driver. This option tells the SB driver not to look -for a SB card but to wait for the mad16 driver. - -options mad16 irq=10 dma=0 dma16=1 io=0x530 joystick=1 cdtype=0 -options opl3 io=0x388 - -post-install mad16 /sbin/ad1848_mixer_reroute 14 8 15 3 16 6 - -This sets resources and options for the mad16 and opl3 drivers. -I use two DMA channels (only one is required) to enable full duplex. -joystick=1 enables the joystick port. cdtype=0 disables the cd port. -You can also set mpu_io and mpu_irq in the mad16 options for the -uart401 driver. - -This tells modprobe to run /sbin/ad1848_mixer_reroute after -mad16 is successfully loaded and initialized. The source -for ad1848_mixer_reroute is appended to the end of this readme -file. It is impossible for the sound driver to know the actual -connections to the mixer. The 3 inputs intended for cd, synth -and line-in are mapped to the generic inputs line1, line2 and -line3. This program reroutes these mixer channels to their -right names (note the right mapping depends on the actual sound -card that you use). -The numeric parameters mean: - 14=line1 8=cd - reroute line1 to the CD input. - 15=line2 3=synth - reroute line2 to the synthesizer input. - 16=line3 6=line - reroute line3 to the line input. -For reference on other input names look at the file -/usr/include/linux/soundcard.h. - -Using a joystick ------------------ -You must enable a joystick in the mad16 options. (also -in /etc/isapnp.conf if you use it). -Tested with regular analog joysticks. - -A CDROM drive connected to the sound card ------------------------------------------ -The 82C931 chip has support only for secondary ATAPI cdrom. -(cdtype=8). Loading the mad16 driver resets the C931 chip -and if a cdrom was already mounted it may cause a complete -system hang. Do not use the sound card if you have an alternative. -If you do use the sound card it is important that you load -the mad16 driver (use "modprobe mad16" to prevent auto-unloading) -before the cdrom is accessed the first time. - -Using the sound driver built-in to the kernel may help here, but... -Most new systems have a PnP BIOS and also two IDE controllers. -The IDE controller on the sound card may be needed only on older -systems (which have only one IDE controller) but these systems -also do not have a PnP BIOS - requiring isapnptools and a modularized -driver. - -Known problems --------------- -1. See the section on "A CDROM drive connected to the sound card". - -2. On my system the codec cannot capture companded sound samples. - (eg., recording from /dev/audio). When any companded capture is - requested I get stereo-16 bit samples instead. Playback of - companded samples works well. Apparently this problem is not common - to all C931 based cards. I do not know how to identify cards that - have this problem. - -Source for ad1848_mixer_reroute.c ---------------------------------- -#include -#include -#include - -static char *mixer_names[SOUND_MIXER_NRDEVICES] = - SOUND_DEVICE_LABELS; - -int -main(int argc, char **argv) { - int val, from, to; - int i, fd; - - fd = open("/dev/mixer", O_RDWR); - if(fd < 0) { - perror("/dev/mixer"); - return 1; - } - - for(i = 2; i < argc; i += 2) { - from = atoi(argv[i-1]); - to = atoi(argv[i]); - - if(to == SOUND_MIXER_NONE) - fprintf(stderr, "%s: turning off mixer %s\n", - argv[0], mixer_names[to]); - else - fprintf(stderr, "%s: rerouting mixer %s to %s\n", - argv[0], mixer_names[from], mixer_names[to]); - - val = from << 8 | to; - - if(ioctl(fd, SOUND_MIXER_PRIVATE2, &val)) { - perror("AD1848 mixer reroute"); - return 1; - } - } - - return 0; -} - diff --git a/Documentation/sound/oss/PAS16 b/Documentation/sound/oss/PAS16 deleted file mode 100644 index 5c27229eec8ca14f610e2d5401593e7d80e13ea3..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/PAS16 +++ /dev/null @@ -1,162 +0,0 @@ -Pro Audio Spectrum 16 for 2.3.99 and later -========================================= -by Thomas Molina (tmolina@home.com) -last modified 3 Mar 2001 -Acknowledgement to Axel Boldt (boldt@math.ucsb.edu) for stuff taken -from Configure.help, Riccardo Facchetti for stuff from README.OSS, -and others whose names I could not find. - -This documentation is relevant for the PAS16 driver (pas2_card.c and -friends) under kernel version 2.3.99 and later. If you are -unfamiliar with configuring sound under Linux, please read the -Sound-HOWTO, Documentation/sound/oss/Introduction and other -relevant docs first. - -The following information is relevant information from README.OSS -and legacy docs for the Pro Audio Spectrum 16 (PAS16): -================================================================== - -The pas2_card.c driver supports the following cards -- -Pro Audio Spectrum 16 (PAS16) and compatibles: - Pro Audio Spectrum 16 - Pro Audio Studio 16 - Logitech Sound Man 16 - NOTE! The original Pro Audio Spectrum as well as the PAS+ are not - and will not be supported by the driver. - -The sound driver configuration dialog -------------------------------------- - -Sound configuration starts by making some yes/no questions. Be careful -when answering to these questions since answering y to a question may -prevent some later ones from being asked. For example don't answer y to -the question about (PAS16) if you don't really have a PAS16. Sound -configuration may also be made modular by answering m to configuration -options presented. - -Note also that all questions may not be asked. The configuration program -may disable some questions depending on the earlier choices. It may also -select some options automatically as well. - - "ProAudioSpectrum 16 support", - - Answer 'y'_ONLY_ if you have a Pro Audio Spectrum _16_, - Pro Audio Studio 16 or Logitech SoundMan 16 (be sure that - you read the above list correctly). Don't answer 'y' if you - have some other card made by Media Vision or Logitech since they - are not PAS16 compatible. - NOTE! Since 3.5-beta10 you need to enable SB support (next question) - if you want to use the SB emulation of PAS16. It's also possible to - the emulation if you want to use a true SB card together with PAS16 - (there is another question about this that is asked later). - - "Generic OPL2/OPL3 FM synthesizer support", - - Answer 'y' if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). - The PAS16 has an OPL3-compatible FM chip. - -With PAS16 you can use two audio device files at the same time. /dev/dsp (and -/dev/audio) is connected to the 8/16 bit native codec and the /dev/dsp1 (and -/dev/audio1) is connected to the SB emulation (8 bit mono only). - - -The new stuff for 2.3.99 and later -============================================================================ -The following configuration options are relevant to configuring the PAS16: - -Sound card support -CONFIG_SOUND - If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - http://www.tldp.org/docs.html#howto . General information - about the modular sound system is contained in the files - Documentation/sound/oss/Introduction. The file - Documentation/sound/oss/README.OSS contains some slightly outdated but - still useful information as well. - -OSS sound modules -CONFIG_SOUND_OSS - OSS is the Open Sound System suite of sound card drivers. They make - sound programming easier since they provide a common API. Say Y or M - here (the module will be called sound.o) if you haven't found a - driver for your sound card above, then pick your driver from the - list below. - -Persistent DMA buffers -CONFIG_SOUND_DMAP - Linux can often have problems allocating DMA buffers for ISA sound - cards on machines with more than 16MB of RAM. This is because ISA - DMA buffers must exist below the 16MB boundary and it is quite - possible that a large enough free block in this region cannot be - found after the machine has been running for a while. If you say Y - here the DMA buffers (64Kb) will be allocated at boot time and kept - until the shutdown. This option is only useful if you said Y to - "OSS sound modules", above. If you said M to "OSS sound modules" - then you can get the persistent DMA buffer functionality by passing - the command-line argument "dmabuf=1" to the sound.o module. - - Say y here for PAS16. - -ProAudioSpectrum 16 support -CONFIG_SOUND_PAS - Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio - 16 or Logitech SoundMan 16 sound card. Don't answer Y if you have - some other card made by Media Vision or Logitech since they are not - PAS16 compatible. It is not necessary to enable the separate - Sound Blaster support; it is included in the PAS driver. - - If you compile the driver into the kernel, you have to add - "pas2=,,,,,,, - to the kernel command line. - -FM Synthesizer (YM3812/OPL-3) support -CONFIG_SOUND_YM3812 - Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). - Answering Y is usually a safe and recommended choice, however some - cards may have software (TSR) FM emulation. Enabling FM support with - these cards may cause trouble (I don't currently know of any such - cards, however). - Please read the file Documentation/sound/oss/OPL3 if your card has an - OPL3 chip. - If you compile the driver into the kernel, you have to add - "opl3=" to the kernel command line. - - If you compile your drivers into the kernel, you MUST configure - OPL3 support as a module for PAS16 support to work properly. - You can then get OPL3 functionality by issuing the command: - insmod opl3 - In addition, you must either add the following line to - /etc/modprobe.d/*.conf: - options opl3 io=0x388 - or else add the following line to /etc/lilo.conf: - opl3=0x388 - - -EXAMPLES -=================================================================== -To use the PAS16 in my computer I have enabled the following sound -configuration options: - -CONFIG_SOUND=y -CONFIG_SOUND_OSS=y -CONFIG_SOUND_TRACEINIT=y -CONFIG_SOUND_DMAP=y -CONFIG_SOUND_PAS=y -CONFIG_SOUND_SB=n -CONFIG_SOUND_YM3812=m - -I have also included the following append line in /etc/lilo.conf: -append="pas2=0x388,10,3,-1,0x220,5,1,-1 sb=0x220,5,1,-1 opl3=0x388" - -The io address of 0x388 is default configuration on the PAS16. The -irq of 10 and dma of 3 may not match your installation. The above -configuration enables PAS16, 8-bit Soundblaster and OPL3 -functionality. If Soundblaster functionality is not desired, the -following line would be appropriate: -append="pas2=0x388,10,3,-1,0,-1,-1,-1 opl3=0x388" - -If sound is built totally modular, the above options may be -specified in /etc/modprobe.d/*.conf for pas2, sb and opl3 -respectively. diff --git a/Documentation/sound/oss/PSS b/Documentation/sound/oss/PSS deleted file mode 100644 index 187b9525e1f6df0f9483ad027d0e52ece43ae459..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/PSS +++ /dev/null @@ -1,41 +0,0 @@ -The PSS cards and other ECHO based cards provide an onboard DSP with -downloadable programs and also has an AD1848 "Microsoft Sound System" -device. The PSS driver enables MSS and MPU401 modes of the card. SB -is not enabled since it doesn't work concurrently with MSS. - -If you build this driver as a module then the driver takes the following -parameters - -pss_io. The I/O base the PSS card is configured at (normally 0x220 - or 0x240) - -mss_io The base address of the Microsoft Sound System interface. - This is normally 0x530, but may be 0x604 or other addresses. - -mss_irq The interrupt assigned to the Microsoft Sound System - emulation. IRQ's 3,5,7,9,10,11 and 12 are available. If you - get IRQ errors be sure to check the interrupt is set to - "ISA/Legacy" in the BIOS on modern machines. - -mss_dma The DMA channel used by the Microsoft Sound System. - This can be 0, 1, or 3. DMA 0 is not available on older - machines and will cause a crash on them. - -mpu_io The MPU emulation base address. This sets the base of the - synthesizer. It is typically 0x330 but can be altered. - -mpu_irq The interrupt to use for the synthesizer. It must differ - from the IRQ used by the Microsoft Sound System port. - - -The mpu_io/mpu_irq fields are optional. If they are not specified the -synthesizer parts are not configured. - -When the module is loaded it looks for a file called -/etc/sound/pss_synth. This is the firmware file from the DOS install disks. -This fil holds a general MIDI emulation. The file expected is called -genmidi.ld on newer DOS driver install disks and synth.ld on older ones. - -You can also load alternative DSP algorithms into the card if you wish. One -alternative driver can be found at http://www.mpg123.de/ - diff --git a/Documentation/sound/oss/PSS-updates b/Documentation/sound/oss/PSS-updates deleted file mode 100644 index 11914a1dc7e78df381999338e9015f53df523aaa..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/PSS-updates +++ /dev/null @@ -1,88 +0,0 @@ - This file contains notes for users of PSS sound cards who wish to use the -newly added features of the newest version of this driver. - - The major enhancements present in this new revision of this driver is the -addition of two new module parameters that allow you to take full advantage of -all the features present on your PSS sound card. These features include the -ability to enable both the builtin CDROM and joystick ports. - -pss_enable_joystick - - This parameter is basically a flag. A 0 will leave the joystick port -disabled, while a non-zero value would enable the joystick port. The default -setting is pss_enable_joystick=0 as this keeps this driver fully compatible -with systems that were using previous versions of this driver. If you wish to -enable the joystick port you will have to add pss_enable_joystick=1 as an -argument to the driver. To actually use the joystick port you will then have -to load the joystick driver itself. Just remember to load the joystick driver -AFTER the pss sound driver. - -pss_cdrom_port - - This parameter takes a port address as its parameter. Any available port -address can be specified to enable the CDROM port, except for 0x0 and -1 as -these values would leave the port disabled. Like the joystick port, the cdrom -port will require that an appropriate CDROM driver be loaded before you can make -use of the newly enabled CDROM port. Like the joystick port option above, -remember to load the CDROM driver AFTER the pss sound driver. While it may -differ on some PSS sound cards, all the PSS sound cards that I have seen have a -builtin Wearnes CDROM port. If this is the case with your PSS sound card you -should load aztcd with the appropriate port option that matches the port you -assigned to the CDROM port when you loaded your pss sound driver. (ex. -modprobe pss pss_cdrom_port=0x340 && modprobe aztcd aztcd=0x340) The default -setting of this parameter leaves the CDROM port disabled to maintain full -compatibility with systems using previous versions of this driver. - - Other options have also been added for the added convenience and utility -of the user. These options are only available if this driver is loaded as a -module. - -pss_no_sound - - This module parameter is a flag that can be used to tell the driver to -just configure non-sound components. 0 configures all components, a non-0 -value will only attempt to configure the CDROM and joystick ports. This -parameter can be used by a user who only wished to use the builtin joystick -and/or CDROM port(s) of his PSS sound card. If this driver is loaded with this -parameter and with the parameter below set to true then a user can safely unload -this driver with the following command "rmmod pss && rmmod ad1848 && rmmod -mpu401 && rmmod sound && rmmod soundcore" and retain the full functionality of -his CDROM and/or joystick port(s) while gaining back the memory previously used -by the sound drivers. This default setting of this parameter is 0 to retain -full behavioral compatibility with previous versions of this driver. - -pss_keep_settings - - This parameter can be used to specify whether you want the driver to reset -all emulations whenever its unloaded. This can be useful for those who are -sharing resources (io ports, IRQ's, DMA's) between different ISA cards. This -flag can also be useful in that future versions of this driver may reset all -emulations by default on the driver's unloading (as it probably should), so -specifying it now will ensure that all future versions of this driver will -continue to work as expected. The default value of this parameter is 1 to -retain full behavioral compatibility with previous versions of this driver. - -pss_firmware - - This parameter can be used to specify the file containing the firmware -code so that a user could tell the driver where that file is located instead -of having to put it in a predefined location with a predefined name. The -default setting of this parameter is "/etc/sound/pss_synth" as this was the -path and filename the hardcoded value in the previous versions of this driver. - -Examples: - -# Normal PSS sound card system, loading of drivers. -# Should be specified in an rc file (ex. Slackware uses /etc/rc.d/rc.modules). - -/sbin/modprobe pss pss_io=0x220 mpu_io=0x338 mpu_irq=9 mss_io=0x530 mss_irq=10 mss_dma=1 pss_cdrom_port=0x340 pss_enable_joystick=1 -/sbin/modprobe aztcd aztcd=0x340 -/sbin/modprobe joystick - -# System using the PSS sound card just for its CDROM and joystick ports. -# Should be specified in an rc file (ex. Slackware uses /etc/rc.d/rc.modules). - -/sbin/modprobe pss pss_io=0x220 pss_cdrom_port=0x340 pss_enable_joystick=1 pss_no_sound=1 -/sbin/rmmod pss && /sbin/rmmod ad1848 && /sbin/rmmod mpu401 && /sbin/rmmod sound && /sbin/rmmod soundcore # This line not needed, but saves memory. -/sbin/modprobe aztcd aztcd=0x340 -/sbin/modprobe joystick diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS deleted file mode 100644 index a085ea3611a136346c1405428c3b44c0b276e479..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/README.OSS +++ /dev/null @@ -1,1455 +0,0 @@ -Introduction ------------- - -This file is a collection of all the old Readme files distributed with -OSS/Lite by Hannu Savolainen. Since the new Linux sound driver is founded -on it I think these information may still be interesting for users that -have to configure their sound system. - -Be warned: Alan Cox is the current maintainer of the Linux sound driver so if -you have problems with it, please contact him or the current device-specific -driver maintainer (e.g. for aedsp16 specific problems contact me). If you have -patches, contributions or suggestions send them to Alan: I'm sure they are -welcome. - -In this document you will find a lot of references about OSS/Lite or ossfree: -they are gone forever. Keeping this in mind and with a grain of salt this -document can be still interesting and very helpful. - -[ File edited 17.01.1999 - Riccardo Facchetti ] -[ Edited miroSOUND section 19.04.2001 - Robert Siemer ] - -OSS/Free version 3.8 release notes ----------------------------------- - -Please read the SOUND-HOWTO (available from sunsite.unc.edu and other Linux FTP -sites). It gives instructions about using sound with Linux. It's bit out of -date but still very useful. Information about bug fixes and such things -is available from the web page (see above). - -Please check http://www.opensound.com/pguide for more info about programming -with OSS API. - - ==================================================== -- THIS VERSION ____REQUIRES____ Linux 2.1.57 OR LATER. - ==================================================== - -Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z" -contain useful utilities to be used with this driver. -See http://www.opensound.com/ossfree/ for -download instructions. - -If you are looking for the installation instructions, please -look forward into this document. - -Supported sound cards ---------------------- - -See below. - -Contributors ------------- - -This driver contains code by several contributors. In addition several other -persons have given useful suggestions. The following is a list of major -contributors. (I could have forgotten some names.) - - Craig Metz 1/2 of the PAS16 Mixer and PCM support - Rob Hooft Volume computation algorithm for the FM synth. - Mika Liljeberg uLaw encoding and decoding routines - Jeff Tranter Linux SOUND HOWTO document - Greg Lee Volume computation algorithm for the GUS and - lots of valuable suggestions. - Andy Warner ISC port - Jim Lowe, - Amancio Hasty Jr FreeBSD/NetBSD port - Anders Baekgaard Bug hunting and valuable suggestions. - Joerg Schubert SB16 DSP support (initial version). - Andrew Robinson Improvements to the GUS driver - Megens SA MIDI recording for SB and SB Pro (initial version). - Mikael Nordqvist Linear volume support for GUS and - nonblocking /dev/sequencer. - Ian Hartas SVR4.2 port - Markus Aroharju and - Risto Kankkunen Major contributions to the mixer support - of GUS v3.7. - Hunyue Yau Mixer support for SG NX Pro. - Marc Hoffman PSS support (initial version). - Rainer Vranken Initialization for Jazz16 (initial version). - Peter Trattler Initial version of loadable module support for Linux. - JRA Gibson 16 bit mode for Jazz16 (initial version) - Davor Jadrijevic MAD16 support (initial version) - Gregor Hoffleit Mozart support (initial version) - Riccardo Facchetti Audio Excel DSP 16 (aedsp16) support - James Hightower Spotting a tiny but important bug in CS423x support. - Denis Sablic OPTi 82C924 specific enhancements (non PnP mode) - Tim MacKenzie Full duplex support for OPTi 82C930. - - Please look at lowlevel/README for more contributors. - -There are probably many other names missing. If you have sent me some -patches and your name is not in the above list, please inform me. - -Sending your contributions or patches -------------------------------------- - -First of all it's highly recommended to contact me before sending anything -or before even starting to do any work. Tell me what you suggest to be -changed or what you have planned to do. Also ensure you are using the -very latest (development) version of OSS/Free since the change may already be -implemented there. In general it's a major waste of time to try to improve a -several months old version. Information about the latest version can be found -from http://www.opensound.com/ossfree. In general there is no point in -sending me patches relative to production kernels. - -Sponsors etc. -------------- - -The following companies have greatly helped development of this driver -in form of a free copy of their product: - -Novell, Inc. UnixWare personal edition + SDK -The Santa Cruz Operation, Inc. A SCO OpenServer + SDK -Ensoniq Corp, a SoundScape card and extensive amount of assistance -MediaTrix Peripherals Inc, a AudioTrix Pro card + SDK -Acer, Inc. a pair of AcerMagic S23 cards. - -In addition the following companies have provided me sufficient amount -of technical information at least some of their products (free or $$$): - -Advanced Gravis Computer Technology Ltd. -Media Vision Inc. -Analog Devices Inc. -Logitech Inc. -Aztech Labs Inc. -Crystal Semiconductor Corporation, -Integrated Circuit Systems Inc. -OAK Technology -OPTi -Turtle Beach -miro -Ad Lib Inc. ($$) -Music Quest Inc. ($$) -Creative Labs ($$$) - -If you have some problems -========================= - -Read the sound HOWTO (sunsite.unc.edu:/pub/Linux/docs/...?). -Also look at the home page (http://www.opensound.com/ossfree). It may -contain info about some recent bug fixes. - -It's likely that you have some problems when trying to use the sound driver -first time. Sound cards don't have standard configuration so there are no -good default configuration to use. Please try to use same I/O, DMA and IRQ -values for the sound card than with DOS. - -If you get an error message when trying to use the driver, please look -at /var/adm/messages for more verbose error message. - - -The following errors are likely with /dev/dsp and /dev/audio. - - - "No such device or address". - This error indicates that there are no suitable hardware for the - device file or the sound driver has been compiled without support for - this particular device. For example /dev/audio and /dev/dsp will not - work if "digitized voice support" was not enabled during "make config". - - - "Device or resource busy". Probably the IRQ (or DMA) channel - required by the sound card is in use by some other device/driver. - - - "I/O error". Almost certainly (99%) it's an IRQ or DMA conflict. - Look at the kernel messages in /var/adm/notice for more info. - - - "Invalid argument". The application is calling ioctl() - with impossible parameters. Check that the application is - for sound driver version 2.X or later. - -Linux installation -================== - -IMPORTANT! Read this if you are installing a separately - distributed version of this driver. - - Check that your kernel version works with this - release of the driver (see Readme). Also verify - that your current kernel version doesn't have more - recent sound driver version than this one. IT'S HIGHLY - RECOMMENDED THAT YOU USE THE SOUND DRIVER VERSION THAT - IS DISTRIBUTED WITH KERNEL SOURCES. - -- When installing separately distributed sound driver you should first - read the above notice. Then try to find proper directory where and how - to install the driver sources. You should not try to install a separately - distributed driver version if you are not able to find the proper way - yourself (in this case use the version that is distributed with kernel - sources). Remove old version of linux/drivers/sound directory before - installing new files. - -- To build the device files you need to run the enclosed shell script - (see below). You need to do this only when installing sound driver - first time or when upgrading to much recent version than the earlier - one. - -- Configure and compile Linux as normally (remember to include the - sound support during "make config"). Please refer to kernel documentation - for instructions about configuring and compiling kernel. File Readme.cards - contains card specific instructions for configuring this driver for - use with various sound cards. - -Boot time configuration (using lilo and insmod) ------------------------------------------------ - -This information has been removed. Too many users didn't believe -that it's really not necessary to use this method. Please look at -Readme of sound driver version 3.0.1 if you still want to use this method. - -Problems --------- - -Common error messages: - -- /dev/???????: No such file or directory. -Run the script at the end of this file. - -- /dev/???????: No such device. -You are not running kernel which contains the sound driver. When using -modularized sound driver this error means that the sound driver is not -loaded. - -- /dev/????: No such device or address. -Sound driver didn't detect suitable card when initializing. Please look at -Readme.cards for info about configuring the driver with your card. Also -check for possible boot (insmod) time error messages in /var/adm/messages. - -- Other messages or problems -Please check http://www.opensound.com/ossfree for more info. - -Configuring version 3.8 (for Linux) with some common sound cards -================================================================ - -This document describes configuring sound cards with the freeware version of -Open Sound Systems (OSS/Free). Information about the commercial version -(OSS/Linux) and its configuration is available from -http://www.opensound.com/linux.html. Information presented here is -not valid for OSS/Linux. - -If you are unsure about how to configure OSS/Free -you can download the free evaluation version of OSS/Linux from the above -address. There is a chance that it can autodetect your sound card. In this case -you can use the information included in soundon.log when configuring OSS/Free. - - -IMPORTANT! This document covers only cards that were "known" when - this driver version was released. Please look at - http://www.opensound.com/ossfree for info about - cards introduced recently. - - When configuring the sound driver, you should carefully - check each sound configuration option (particularly - "Support for /dev/dsp and /dev/audio"). The default values - offered by these programs are not necessarily valid. - - -THE BIGGEST MISTAKES YOU CAN MAKE -================================= - -1. Assuming that the card is Sound Blaster compatible when it's not. --------------------------------------------------------------------- - -The number one mistake is to assume that your card is compatible with -Sound Blaster. Only the cards made by Creative Technology or which have -one or more chips labeled by Creative are SB compatible. In addition there -are few sound chipsets which are SB compatible in Linux such as ESS1688 or -Jazz16. Note that SB compatibility in DOS/Windows does _NOT_ mean anything -in Linux. - -IF YOU REALLY ARE 150% SURE YOU HAVE A SOUND BLASTER YOU CAN SKIP THE REST OF -THIS CHAPTER. - -For most other "supposed to be SB compatible" cards you have to use other -than SB drivers (see below). It is possible to get most sound cards to work -in SB mode but in general it's a complete waste of time. There are several -problems which you will encounter by using SB mode with cards that are not -truly SB compatible: - -- The SB emulation is at most SB Pro (DSP version 3.x) which means that -you get only 8 bit audio (there is always an another ("native") mode which -gives the 16 bit capability). The 8 bit only operation is the reason why -many users claim that sound quality in Linux is much worse than in DOS. -In addition some applications require 16 bit mode and they produce just -noise with a 8 bit only device. -- The card may work only in some cases but refuse to work most of the -time. The SB compatible mode always requires special initialization which is -done by the DOS/Windows drivers. This kind of cards work in Linux after -you have warm booted it after DOS but they don't work after cold boot -(power on or reset). -- You get the famous "DMA timed out" messages. Usually all SB clones have -software selectable IRQ and DMA settings. If the (power on default) values -currently used by the card don't match configuration of the driver you will -get the above error message whenever you try to record or play. There are -few other reasons to the DMA timeout message but using the SB mode seems -to be the most common cause. - -2. Trying to use a PnP (Plug & Play) card just like an ordinary sound card --------------------------------------------------------------------------- - -Plug & Play is a protocol defined by Intel and Microsoft. It lets operating -systems to easily identify and reconfigure I/O ports, IRQs and DMAs of ISA -cards. The problem with PnP cards is that the standard Linux doesn't currently -(versions 2.1.x and earlier) don't support PnP. This means that you will have -to use some special tricks (see later) to get a PnP card alive. Many PnP cards -work after they have been initialized but this is not always the case. - -There are sometimes both PnP and non-PnP versions of the same sound card. -The non-PnP version is the original model which usually has been discontinued -more than an year ago. The PnP version has the same name but with "PnP" -appended to it (sometimes not). This causes major confusion since the non-PnP -model works with Linux but the PnP one doesn't. - -You should carefully check if "Plug & Play" or "PnP" is mentioned in the name -of the card or in the documentation or package that came with the card. -Everything described in the rest of this document is not necessarily valid for -PnP models of sound cards even you have managed to wake up the card properly. -Many PnP cards are simply too different from their non-PnP ancestors which are -covered by this document. - - -Cards that are not (fully) supported by this driver -=================================================== - -See http://www.opensound.com/ossfree for information about sound cards -to be supported in future. - - -How to use sound without recompiling kernel and/or sound driver -=============================================================== - -There is a commercial sound driver which comes in precompiled form and doesn't -require recompiling of the kernel. See http://www.4Front-tech.com/oss.html for -more info. - - -Configuring PnP cards -===================== - -New versions of most sound cards use the so-called ISA PnP protocol for -soft configuring their I/O, IRQ, DMA and shared memory resources. -Currently at least cards made by Creative Technology (SB32 and SB32AWE -PnP), Gravis (GUS PnP and GUS PnP Pro), Ensoniq (Soundscape PnP) and -Aztech (some Sound Galaxy models) use PnP technology. The CS4232/4236 audio -chip by Crystal Semiconductor (Intel Atlantis, HP Pavilion and many other -motherboards) is also based on PnP technology but there is a "native" driver -available for it (see information about CS4232 later in this document). - -PnP sound cards (as well as most other PnP ISA cards) are not supported -by this version of the driver . Proper -support for them should be released during 97 once the kernel level -PnP support is available. - -There is a method to get most of the PnP cards to work. The basic method -is the following: - -1) Boot DOS so the card's DOS drivers have a chance to initialize it. -2) _Cold_ boot to Linux by using "loadlin.exe". Hitting ctrl-alt-del -works with older machines but causes a hard reset of all cards on recent -(Pentium) machines. -3) If you have the sound driver in Linux configured properly, the card should -work now. "Proper" means that I/O, IRQ and DMA settings are the same as in -DOS. The hard part is to find which settings were used. See the documentation of -your card for more info. - -Windows 95 could work as well as DOS but running loadlin may be difficult. -Probably you should "shut down" your machine to MS-DOS mode before running it. - -Some machines have a BIOS utility for setting PnP resources. This is a good -way to configure some cards. In this case you don't need to boot DOS/Win95 -before starting Linux. - -Another way to initialize PnP cards without DOS/Win95 is a Linux based -PnP isolation tool. When writing this there is a pre alpha test version -of such a tool available from ftp://ftp.demon.co.uk/pub/unix/linux/utils. The -file is called isapnptools-*. Please note that this tool is just a temporary -solution which may be incompatible with future kernel versions having proper -support for PnP cards. There are bugs in setting DMA channels in earlier -versions of isapnptools so at least version 1.6 is required with sound cards. - -Yet another way to use PnP cards is to use (commercial) OSS/Linux drivers. See -http://www.opensound.com/linux.html for more info. This is probably the way you -should do it if you don't want to spend time recompiling the kernel and -required tools. - - -Read this before trying to configure the driver -=============================================== - -There are currently many cards that work with this driver. Some of the cards -have native support while others work since they emulate some other -card (usually SB, MSS/WSS and/or MPU401). The following cards have native -support in the driver. Detailed instructions for configuring these cards -will be given later in this document. - -Pro Audio Spectrum 16 (PAS16) and compatibles: - Pro Audio Spectrum 16 - Pro Audio Studio 16 - Logitech Sound Man 16 - NOTE! The original Pro Audio Spectrum as well as the PAS+ are not - and will not be supported by the driver. - -Media Vision Jazz16 based cards - Pro Sonic 16 - Logitech SoundMan Wave - (Other Jazz based cards should work but I don't have any reports - about them). - -Sound Blasters - SB 1.0 to 2.0 - SB Pro - SB 16 - SB32/64/AWE - Configure SB32/64/AWE just like SB16. See lowlevel/README.awe - for information about using the wave table synth. - NOTE! AWE63/Gold and 16/32/AWE "PnP" cards need to be activated - using isapnptools before they work with OSS/Free. - SB16 compatible cards by other manufacturers than Creative. - You have been fooled since there are _no_ SB16 compatible - cards on the market (as of May 1997). It's likely that your card - is compatible just with SB Pro but there is also a non-SB- - compatible 16 bit mode. Usually it's MSS/WSS but it could also - be a proprietary one like MV Jazz16 or ESS ES688. OPTi - MAD16 chips are very common in so called "SB 16 bit cards" - (try with the MAD16 driver). - - ====================================================================== - "Supposed to be SB compatible" cards. - Forget the SB compatibility and check for other alternatives - first. The only cards that work with the SB driver in - Linux have been made by Creative Technology (there is at least - one chip on the card with "CREATIVE" printed on it). The - only other SB compatible chips are ESS and Jazz16 chips - (maybe ALSxxx chips too but they probably don't work). - Most other "16 bit SB compatible" cards such as "OPTi/MAD16" or - "Crystal" are _NOT_ SB compatible in Linux. - - Practically all sound cards have some kind of SB emulation mode - in addition to their native (16 bit) mode. In most cases this - (8 bit only) SB compatible mode doesn't work with Linux. If - you get it working it may cause problems with games and - applications which require 16 bit audio. Some 16 bit only - applications don't check if the card actually supports 16 bits. - They just dump 16 bit data to a 8 bit card which produces just - noise. - - In most cases the 16 bit native mode is supported by Linux. - Use the SB mode with "clones" only if you don't find anything - better from the rest of this doc. - ====================================================================== - -Gravis Ultrasound (GUS) - GUS - GUS + the 16 bit option - GUS MAX - GUS ACE (No MIDI port and audio recording) - GUS PnP (with RAM) - -MPU-401 and compatibles - The driver works both with the full (intelligent mode) MPU-401 - cards (such as MPU IPC-T and MQX-32M) and with the UART only - dumb MIDI ports. MPU-401 is currently the most common MIDI - interface. Most sound cards are compatible with it. However, - don't enable MPU401 mode blindly. Many cards with native support - in the driver have their own MPU401 driver. Enabling the standard one - will cause a conflict with these cards. So check if your card is - in the list of supported cards before enabling MPU401. - -Windows Sound System (MSS/WSS) - Even when Microsoft has discontinued their own Sound System card - they managed to make it a standard. MSS compatible cards are based on - a codec chip which is easily available from at least two manufacturers - (AD1848 by Analog Devices and CS4231/CS4248 by Crystal Semiconductor). - Currently most sound cards are based on one of the MSS compatible codec - chips. The CS4231 is used in the high quality cards such as GUS MAX, - MediaTrix AudioTrix Pro and TB Tropez (GUS MAX is not MSS compatible). - - Having a AD1848, CS4248 or CS4231 codec chip on the card is a good - sign. Even if the card is not MSS compatible, it could be easy to write - support for it. Note also that most MSS compatible cards - require special boot time initialization which may not be present - in the driver. Also, some MSS compatible cards have native support. - Enabling the MSS support with these cards is likely to - cause a conflict. So check if your card is listed in this file before - enabling the MSS support. - -Yamaha FM synthesizers (OPL2, OPL3 (not OPL3-SA) and OPL4) - Most sound cards have a FM synthesizer chip. The OPL2 is a 2 - operator chip used in the original AdLib card. Currently it's used - only in the cheapest (8 bit mono) cards. The OPL3 is a 4 operator - FM chip which provides better sound quality and/or more available - voices than the OPL2. The OPL4 is a new chip that has an OPL3 and - a wave table synthesizer packed onto the same chip. The driver supports - just the OPL3 mode directly. Most cards with an OPL4 (like - SM Wave and AudioTrix Pro) support the OPL4 mode using MPU401 - emulation. Writing a native OPL4 support is difficult - since Yamaha doesn't give information about their sample ROM chip. - - Enable the generic OPL2/OPL3 FM synthesizer support if your - card has a FM chip made by Yamaha. Don't enable it if your card - has a software (TRS) based FM emulator. - - ---------------------------------------------------------------- - NOTE! OPL3-SA is different chip than the ordinary OPL3. In addition - to the FM synth this chip has also digital audio (WSS) and - MIDI (MPU401) capabilities. Support for OPL3-SA is described below. - ---------------------------------------------------------------- - -Yamaha OPL3-SA1 - - Yamaha OPL3-SA1 (YMF701) is an audio controller chip used on some - (Intel) motherboards and on cheap sound cards. It should not be - confused with the original OPL3 chip (YMF278) which is entirely - different chip. OPL3-SA1 has support for MSS, MPU401 and SB Pro - (not used in OSS/Free) in addition to the OPL3 FM synth. - - There are also chips called OPL3-SA2, OPL3-SA3, ..., OPL3SA-N. They - are PnP chips and will not work with the OPL3-SA1 driver. You should - use the standard MSS, MPU401 and OPL3 options with these chips and to - activate the card using isapnptools. - -4Front Technologies SoftOSS - - SoftOSS is a software based wave table emulation which works with - any 16 bit stereo sound card. Due to its nature a fast CPU is - required (P133 is minimum). Although SoftOSS does _not_ use MMX - instructions it has proven out that recent processors (which appear - to have MMX) perform significantly better with SoftOSS than earlier - ones. For example a P166MMX beats a PPro200. SoftOSS should not be used - on 486 or 386 machines. - - The amount of CPU load caused by SoftOSS can be controlled by - selecting the CONFIG_SOFTOSS_RATE and CONFIG_SOFTOSS_VOICES - parameters properly (they will be prompted by make config). It's - recommended to set CONFIG_SOFTOSS_VOICES to 32. If you have a - P166MMX or faster (PPro200 is not faster) you can set - CONFIG_SOFTOSS_RATE to 44100 (kHz). However with slower systems it - recommended to use sampling rates around 22050 or even 16000 kHz. - Selecting too high values for these parameters may hang your - system when playing MIDI files with hight degree of polyphony - (number of concurrently playing notes). It's also possible to - decrease CONFIG_SOFTOSS_VOICES. This makes it possible to use - higher sampling rates. However using fewer voices decreases - playback quality more than decreasing the sampling rate. - - SoftOSS keeps the samples loaded on the system's RAM so much RAM is - required. SoftOSS should never be used on machines with less than 16 MB - of RAM since this is potentially dangerous (you may accidentally run out - of memory which probably crashes the machine). - - SoftOSS implements the wave table API originally designed for GUS. For - this reason all applications designed for GUS should work (at least - after minor modifications). For example gmod/xgmod and playmidi -g are - known to work. - - To work SoftOSS will require GUS compatible - patch files to be installed on the system (in /dos/ultrasnd/midi). You - can use the public domain MIDIA patchset available from several ftp - sites. - - ********************************************************************* - IMPORTANT NOTICE! The original patch set distributed with the Gravis - Ultrasound card is not in public domain (even though it's available from - some FTP sites). You should contact Voice Crystal (www.voicecrystal.com) - if you like to use these patches with SoftOSS included in OSS/Free. - ********************************************************************* - -PSS based cards (AD1848 + ADSP-2115 + Echo ESC614 ASIC) - Analog Devices and Echo Speech have together defined a sound card - architecture based on the above chips. The DSP chip is used - for emulation of SB Pro, FM and General MIDI/MT32. - - There are several cards based on this architecture. The most known - ones are Orchid SW32 and Cardinal DSP16. - - The driver supports downloading DSP algorithms to these cards. - - NOTE! You will have to use the "old" config script when configuring - PSS cards. - -MediaTrix AudioTrix Pro - The ATP card is built around a CS4231 codec and an OPL4 synthesizer - chips. The OPL4 mode is supported by a microcontroller running a - General MIDI emulator. There is also a SB 1.5 compatible playback mode. - -Ensoniq SoundScape and compatibles - Ensoniq has designed a sound card architecture based on the - OTTO synthesizer chip used in their professional MIDI synthesizers. - Several companies (including Ensoniq, Reveal and Spea) are selling - cards based on this architecture. - - NOTE! The SoundScape PnP is not supported by OSS/Free. Ensoniq VIVO and - VIVO90 cards are not compatible with Soundscapes so the Soundscape - driver will not work with them. You may want to use OSS/Linux with these - cards. - -OPTi MAD16 and Mozart based cards - The Mozart (OAK OTI-601), MAD16 (OPTi 82C928), MAD16 Pro (OPTi 82C929), - OPTi 82C924/82C925 (in _non_ PnP mode) and OPTi 82C930 interface - chips are used in many different sound cards, including some - cards by Reveal miro and Turtle Beach (Tropez). The purpose of these - chips is to connect other audio components to the PC bus. The - interface chip performs address decoding for the other chips. - NOTE! Tropez Plus is not MAD16 but CS4232 based. - NOTE! MAD16 PnP cards (82C924, 82C925, 82C931) are not MAD16 compatible - in the PnP mode. You will have to use them in MSS mode after having - initialized them using isapnptools or DOS. 82C931 probably requires - initialization using DOS/Windows (running isapnptools is not enough). - It's possible to use 82C931 with OSS/Free by jumpering it to non-PnP - mode (provided that the card has a jumper for this). In non-PnP mode - 82C931 is compatible with 82C930 and should work with the MAD16 driver - (without need to use isapnptools or DOS to initialize it). All OPTi - chips are supported by OSS/Linux (both in PnP and non-PnP modes). - -Audio Excel DSP16 - Support for this card was written by Riccardo Faccetti - (riccardo@cdc8g5.cdc.polimi.it). The AEDSP16 driver included in - the lowlevel/ directory. To use it you should enable the - "Additional low level drivers" option. - -Crystal CS4232 and CS4236 based cards such as AcerMagic S23, TB Tropez _Plus_ and - many PC motherboards (Compaq, HP, Intel, ...) - CS4232 is a PnP multimedia chip which contains a CS3231A codec, - SB and MPU401 emulations. There is support for OPL3 too. - Unfortunately the MPU401 mode doesn't work (I don't know how to - initialize it). CS4236 is an enhanced (compatible) version of CS4232. - NOTE! Don't ever try to use isapnptools with CS4232 since this will just - freeze your machine (due to chip bugs). If you have problems in getting - CS4232 working you could try initializing it with DOS (CS4232C.EXE) and - then booting Linux using loadlin. CS4232C.EXE loads a secret firmware - patch which is not documented by Crystal. - -Turtle Beach Maui and Tropez "classic" - This driver version supports sample, patch and program loading commands - described in the Maui/Tropez User's manual. - There is now full initialization support too. The audio side of - the Tropez is based on the MAD16 chip (see above). - NOTE! Tropez Plus is different card than Tropez "classic" and will not - work fully in Linux. You can get audio features working by configuring - the card as a CS4232 based card (above). - - -Jumpers and software configuration -================================== - -Some of the earliest sound cards were jumper configurable. You have to -configure the driver use I/O, IRQ and DMA settings -that match the jumpers. Just few 8 bit cards are fully jumper -configurable (SB 1.x/2.x, SB Pro and clones). -Some cards made by Aztech have an EEPROM which contains the -config info. These cards behave much like hardware jumpered cards. - -Most cards have jumper for the base I/O address but other parameters -are software configurable. Sometimes there are few other jumpers too. - -Latest cards are fully software configurable or they are PnP ISA -compatible. There are no jumpers on the board. - -The driver handles software configurable cards automatically. Just configure -the driver to use I/O, IRQ and DMA settings which are known to work. -You could usually use the same values than with DOS and/or Windows. -Using different settings is possible but not recommended since it may cause -some trouble (for example when warm booting from an OS to another or -when installing new hardware to the machine). - -Sound driver sets the soft configurable parameters of the card automatically -during boot. Usually you don't need to run any extra initialization -programs when booting Linux but there are some exceptions. See the -card-specific instructions below for more info. - -The drawback of software configuration is that the driver needs to know -how the card must be initialized. It cannot initialize unknown cards -even if they are otherwise compatible with some other cards (like SB, -MPU401 or Windows Sound System). - - -What if your card was not listed above? -======================================= - -The first thing to do is to look at the major IC chips on the card. -Many of the latest sound cards are based on some standard chips. If you -are lucky, all of them could be supported by the driver. The most common ones -are the OPTi MAD16, Mozart, SoundScape (Ensoniq) and the PSS architectures -listed above. Also look at the end of this file for list of unsupported -cards and the ones which could be supported later. - -The last resort is to send _exact_ name and model information of the card -to me together with a list of the major IC chips (manufactured, model) to -me. I could then try to check if your card looks like something familiar. - -There are many more cards in the world than listed above. The first thing to -do with these cards is to check if they emulate some other card or interface -such as SB, MSS and/or MPU401. In this case there is a chance to get the -card to work by booting DOS before starting Linux (boot DOS, hit ctrl-alt-del -and boot Linux without hard resetting the machine). In this method the -DOS based driver initializes the hardware to use known I/O, IRQ and DMA -settings. If sound driver is configured to use the same settings, everything -should work OK. - - -Configuring sound driver (with Linux) -===================================== - -The sound driver is currently distributed as part of the Linux kernel. The -files are in /usr/src/linux/drivers/sound/. - -**************************************************************************** -* ALWAYS USE THE SOUND DRIVER VERSION WHICH IS DISTRIBUTED WITH * -* THE KERNEL SOURCE PACKAGE YOU ARE USING. SOME ALPHA AND BETA TEST * -* VERSIONS CAN BE INSTALLED FROM A SEPARATELY DISTRIBUTED PACKAGE * -* BUT CHECK THAT THE PACKAGE IS NOT MUCH OLDER (OR NEWER) THAN THE * -* KERNEL YOU ARE USING. IT'S POSSIBLE THAT THE KERNEL/DRIVER * -* INTERFACE CHANGES BETWEEN KERNEL RELEASES WHICH MAY CAUSE SOME * -* INCOMPATIBILITY PROBLEMS. * -* * -* IN CASE YOU INSTALL A SEPARATELY DISTRIBUTED SOUND DRIVER VERSION, * -* BE SURE TO REMOVE OR RENAME THE OLD SOUND DRIVER DIRECTORY BEFORE * -* INSTALLING THE NEW ONE. LEAVING OLD FILES TO THE SOUND DRIVER * -* DIRECTORY _WILL_ CAUSE PROBLEMS WHEN THE DRIVER IS USED OR * -* COMPILED. * -**************************************************************************** - -To configure the driver, run "make config" in the kernel source directory -(/usr/src/linux). Answer "y" or "m" to the question about Sound card support -(after the questions about mouse, CD-ROM, ftape, etc. support). Questions -about options for sound will then be asked. - -After configuring the kernel and sound driver and compile the kernel -following instructions in the kernel README. - -The sound driver configuration dialog -------------------------------------- - -Sound configuration starts by making some yes/no questions. Be careful -when answering to these questions since answering y to a question may -prevent some later ones from being asked. For example don't answer y to -the first question (PAS16) if you don't really have a PAS16. Don't enable -more cards than you really need since they just consume memory. Also -some drivers (like MPU401) may conflict with your SCSI controller and -prevent kernel from booting. If you card was in the list of supported -cards (above), please look at the card specific config instructions -(later in this file) before starting to configure. Some cards must be -configured in way which is not obvious. - -So here is the beginning of the config dialog. Answer 'y' or 'n' to these -questions. The default answer is shown so that (y/n) means 'y' by default and -(n/y) means 'n'. To use the default value, just hit ENTER. But be careful -since using the default _doesn't_ guarantee anything. - -Note also that all questions may not be asked. The configuration program -may disable some questions depending on the earlier choices. It may also -select some options automatically as well. - - "ProAudioSpectrum 16 support", - - Answer 'y'_ONLY_ if you have a Pro Audio Spectrum _16_, - Pro Audio Studio 16 or Logitech SoundMan 16 (be sure that - you read the above list correctly). Don't answer 'y' if you - have some other card made by Media Vision or Logitech since they - are not PAS16 compatible. - NOTE! Since 3.5-beta10 you need to enable SB support (next question) - if you want to use the SB emulation of PAS16. It's also possible to - the emulation if you want to use a true SB card together with PAS16 - (there is another question about this that is asked later). - "Sound Blaster support", - - Answer 'y' if you have an original SB card made by Creative Labs - or a full 100% hardware compatible clone (like Thunderboard or - SM Games). If your card was in the list of supported cards (above), - please look at the card specific instructions later in this file - before answering this question. For an unknown card you may answer - 'y' if the card claims to be SB compatible. - Enable this option also with PAS16 (changed since v3.5-beta9). - - Don't enable SB if you have a MAD16 or Mozart compatible card. - - "Generic OPL2/OPL3 FM synthesizer support", - - Answer 'y' if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). - Answering 'y' is usually a safe and recommended choice. However some - cards may have software (TSR) FM emulation. Enabling FM support - with these cards may cause trouble. However I don't currently know - such cards. - "Gravis Ultrasound support", - - Answer 'y' if you have GUS or GUS MAX. Answer 'n' if you don't - have GUS since the GUS driver consumes much memory. - Currently I don't have experiences with the GUS ACE so I don't - know what to answer with it. - "MPU-401 support (NOT for SB16)", - - Be careful with this question. The MPU401 interface is supported - by almost any sound card today. However some natively supported cards - have their own driver for MPU401. Enabling the MPU401 option with - these cards will cause a conflict. Also enabling MPU401 on a system - that doesn't really have a MPU401 could cause some trouble. If your - card was in the list of supported cards (above), please look at - the card specific instructions later in this file. - - In MOST cases this MPU401 driver should only be used with "true" - MIDI-only MPU401 professional cards. In most other cases there - is another way to get the MPU401 compatible interface of a - sound card to work. - Support for the MPU401 compatible MIDI port of SB16, ESS1688 - and MV Jazz16 cards is included in the SB driver. Use it instead - of this separate MPU401 driver with these cards. As well - Soundscape, PSS and Maui drivers include their own MPU401 - options. - - It's safe to answer 'y' if you have a true MPU401 MIDI interface - card. - "6850 UART Midi support", - - It's safe to answer 'n' to this question in all cases. The 6850 - UART interface is so rarely used. - "PSS (ECHO-ADI2111) support", - - Answer 'y' only if you have Orchid SW32, Cardinal DSP16 or some - other card based on the PSS chipset (AD1848 codec + ADSP-2115 - DSP chip + Echo ESC614 ASIC CHIP). - "16 bit sampling option of GUS (_NOT_ GUS MAX)", - - Answer 'y' if you have installed the 16 bit sampling daughtercard - to your GUS. Answer 'n' if you have GUS MAX. Enabling this option - disables GUS MAX support. - "GUS MAX support", - - Answer 'y' only if you have a GUS MAX. - "Microsoft Sound System support", - - Again think carefully before answering 'y' to this question. It's - safe to answer 'y' in case you have the original Windows Sound - System card made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). - Also you may answer 'y' in case your card was not listed earlier - in this file. For cards having native support in the driver, consult - the card specific instructions later in this file. Some drivers - have their own MSS support and enabling this option will cause a - conflict. - Note! The MSS driver permits configuring two DMA channels. This is a - "nonstandard" feature and works only with very few cards (if any). - In most cases the second DMA channel should be disabled or set to - the same channel than the first one. Trying to configure two separate - channels with cards that don't support this feature will prevent - audio (at least recording) from working. - "Ensoniq Soundscape support", - - Answer 'y' if you have a sound card based on the Ensoniq SoundScape - chipset. Such cards are being manufactured at least by Ensoniq, - Spea and Reveal (note that Reveal makes other cards also). The oldest - cards made by Spea don't work properly with Linux. - Soundscape PnP as well as Ensoniq VIVO work only with the commercial - OSS/Linux version. - "MediaTrix AudioTrix Pro support", - - Answer 'y' if you have the AudioTrix Pro. - "Support for MAD16 and/or Mozart based cards", - - Answer y if your card has a Mozart (OAK OTI-601) or MAD16 - (OPTi 82C928, 82C929, 82C924/82C925 or 82C930) audio interface chip. - These chips are - currently quite common so it's possible that many no-name cards - have one of them. In addition the MAD16 chip is used in some - cards made by known manufacturers such as Turtle Beach (Tropez), - Reveal (some models) and Diamond (some recent models). - Note OPTi 82C924 and 82C925 are MAD16 compatible only in non PnP - mode (jumper selectable on many cards). - "Support for TB Maui" - - This enables TB Maui specific initialization. Works with TB Maui - and TB Tropez (may not work with Tropez Plus). - - -Then the configuration program asks some y/n questions about the higher -level services. It's recommended to answer 'y' to each of these questions. -Answer 'n' only if you know you will not need the option. - - "MIDI interface support", - - Answering 'n' disables /dev/midi## devices and access to any - MIDI ports using /dev/sequencer and /dev/music. This option - also affects any MPU401 and/or General MIDI compatible devices. - "FM synthesizer (YM3812/OPL-3) support", - - Answer 'y' here. - "/dev/sequencer support", - - Answering 'n' disables /dev/sequencer and /dev/music. - -Entering the I/O, IRQ and DMA config parameters ------------------------------------------------ - -After the above questions the configuration program prompts for the -card specific configuration information. Usually just a set of -I/O address, IRQ and DMA numbers are asked. With some cards the program -asks for some files to be used during initialization of the card. For example -many cards have a DSP chip or microprocessor which must be initialized by -downloading a program (microcode) file to the card. - -Instructions for answering these questions are given in the next section. - - -Card specific information -========================= - -This section gives additional instructions about configuring some cards. -Please refer manual of your card for valid I/O, IRQ and DMA numbers. Using -the same settings with DOS/Windows and Linux is recommended. Using -different values could cause some problems when switching between -different operating systems. - -Sound Blasters (the original ones by Creative) ---------------------------------------------- - -NOTE! Check if you have a PnP Sound Blaster (cards sold after summer 1995 - are almost certainly PnP ones). With PnP cards you should use isapnptools - to activate them (see above). - -It's possible to configure these cards to use different I/O, IRQ and -DMA settings. Since the possible/default settings have changed between various -models, you have to consult manual of your card for the proper ones. It's -a good idea to use the same values than with DOS/Windows. With SB and SB Pro -it's the only choice. SB16 has software selectable IRQ and DMA channels but -using different values with DOS and Linux is likely to cause troubles. The -DOS driver is not able to reset the card properly after warm boot from Linux -if Linux has used different IRQ or DMA values. - -The original (steam) Sound Blaster (versions 1.x and 2.x) use always -DMA1. There is no way to change it. - -The SB16 needs two DMA channels. A 8 bit one (1 or 3) is required for -8 bit operation and a 16 bit one (5, 6 or 7) for the 16 bit mode. In theory -it's possible to use just one (8 bit) DMA channel by answering the 8 bit -one when the configuration program asks for the 16 bit one. This may work -in some systems but is likely to cause terrible noise on some other systems. - -It's possible to use two SB16/32/64 at the same time. To do this you should -first configure OSS/Free for one card. Then edit local.h manually and define -SB2_BASE, SB2_IRQ, SB2_DMA and SB2_DMA2 for the second one. You can't get -the OPL3, MIDI and EMU8000 devices of the second card to work. If you are -going to use two PnP Sound Blasters, ensure that they are of different model -and have different PnP IDs. There is no way to get two cards with the same -card ID and serial number to work. The easiest way to check this is trying -if isapnptools can see both cards or just one. - -NOTE! Don't enable the SM Games option (asked by the configuration program) - if you are not 101% sure that your card is a Logitech Soundman Games - (not a SM Wave or SM16). - -SB Clones ---------- - -First of all: There are no SB16 clones. There are SB Pro clones with a -16 bit mode which is not SB16 compatible. The most likely alternative is that -the 16 bit mode means MSS/WSS. - -There are just a few fully 100% hardware SB or SB Pro compatible cards. -I know just Thunderboard and SM Games. Other cards require some kind of -hardware initialization before they become SB compatible. Check if your card -was listed in the beginning of this file. In this case you should follow -instructions for your card later in this file. - -For other not fully SB clones you may try initialization using DOS in -the following way: - - - Boot DOS so that the card specific driver gets run. - - Hit ctrl-alt-del (or use loadlin) to boot Linux. Don't - switch off power or press the reset button. - - If you use the same I/O, IRQ and DMA settings in Linux, the - card should work. - -If your card is both SB and MSS compatible, I recommend using the MSS mode. -Most cards of this kind are not able to work in the SB and the MSS mode -simultaneously. Using the MSS mode provides 16 bit recording and playback. - -ProAudioSpectrum 16 and compatibles ------------------------------------ - -PAS16 has a SB emulation chip which can be used together with the native -(16 bit) mode of the card. To enable this emulation you should configure -the driver to have SB support too (this has been changed since version -3.5-beta9 of this driver). - -With current driver versions it's also possible to use PAS16 together with -another SB compatible card. In this case you should configure SB support -for the other card and to disable the SB emulation of PAS16 (there is a -separate questions about this). - -With PAS16 you can use two audio device files at the same time. /dev/dsp (and -/dev/audio) is connected to the 8/16 bit native codec and the /dev/dsp1 (and -/dev/audio1) is connected to the SB emulation (8 bit mono only). - -Gravis Ultrasound ------------------ - -There are many different revisions of the Ultrasound card (GUS). The -earliest ones (pre 3.7) don't have a hardware mixer. With these cards -the driver uses a software emulation for synth and pcm playbacks. It's -also possible to switch some of the inputs (line in, mic) off by setting -mixer volume of the channel level below 10%. For recording you have -to select the channel as a recording source and to use volume above 10%. - -GUS 3.7 has a hardware mixer. - -GUS MAX and the 16 bit sampling daughtercard have a CS4231 codec chip which -also contains a mixer. - -Configuring GUS is simple. Just enable the GUS support and GUS MAX or -the 16 bit daughtercard if you have them. Note that enabling the daughter -card disables GUS MAX driver. - -NOTE for owners of the 16 bit daughtercard: By default the daughtercard -uses /dev/dsp (and /dev/audio). Command "ln -sf /dev/dsp1 /dev/dsp" -selects the daughter card as the default device. - -With just the standard GUS enabled the configuration program prompts -for the I/O, IRQ and DMA numbers for the card. Use the same values than -with DOS. - -With the daughter card option enabled you will be prompted for the I/O, -IRQ and DMA numbers for the daughter card. You have to use different I/O -and DMA values than for the standard GUS. The daughter card permits -simultaneous recording and playback. Use /dev/dsp (the daughtercard) for -recording and /dev/dsp1 (GUS GF1) for playback. - -GUS MAX uses the same I/O address and IRQ settings than the original GUS -(GUS MAX = GUS + a CS4231 codec). In addition an extra DMA channel may be used. -Using two DMA channels permits simultaneous playback using two devices -(dev/dsp0 and /dev/dsp1). The second DMA channel is required for -full duplex audio. -To enable the second DMA channels, give a valid DMA channel when the config -program asks for the GUS MAX DMA (entering -1 disables the second DMA). -Using 16 bit DMA channels (5,6 or 7) is recommended. - -If you have problems in recording with GUS MAX, you could try to use -just one 8 bit DMA channel. Recording will not work with one DMA -channel if it's a 16 bit one. - -Microphone input of GUS MAX is connected to mixer in little bit nonstandard -way. There is actually two microphone volume controls. Normal "mic" controls -only recording level. Mixer control "speaker" is used to control volume of -microphone signal connected directly to line/speaker out. So just decrease -volume of "speaker" if you have problems with microphone feedback. - -GUS ACE works too but any attempt to record or to use the MIDI port -will fail. - -GUS PnP (with RAM) is partially supported but it needs to be initialized using -DOS or isapnptools before starting the driver. - -MPU401 and Windows Sound System -------------------------------- - -Again. Don't enable these options in case your card is listed -somewhere else in this file. - -Configuring these cards is obvious (or it should be). With MSS -you should probably enable the OPL3 synth also since -most MSS compatible cards have it. However check that this is true -before enabling OPL3. - -Sound driver supports more than one MPU401 compatible cards at the same time -but the config program asks config info for just the first of them. -Adding the second or third MPU interfaces must be done manually by -editing sound/local.h (after running the config program). Add defines for -MPU2_BASE & MPU2_IRQ (and MPU3_BASE & MPU3_IRQ) to the file. - -CAUTION! - -The default I/O base of Adaptec AHA-1542 SCSI controller is 0x330 which -is also the default of the MPU401 driver. Don't configure the sound driver to -use 0x330 as the MPU401 base if you have a AHA1542. The kernel will not boot -if you make this mistake. - -PSS ---- - -Even the PSS cards are compatible with SB, MSS and MPU401, you must not -enable these options when configuring the driver. The configuration -program handles these options itself. (You may use the SB, MPU and MSS options -together with PSS if you have another card on the system). - -The PSS driver enables MSS and MPU401 modes of the card. SB is not enabled -since it doesn't work concurrently with MSS. The driver loads also a -DSP algorithm which is used to for the general MIDI emulation. The -algorithm file (.ld) is read by the config program and written to a -file included when the pss.c is compiled. For this reason the config -program asks if you want to download the file. Use the genmidi.ld file -distributed with the DOS/Windows drivers of the card (don't use the mt32.ld). -With some cards the file is called 'synth.ld'. You must have access to -the file when configuring the driver. The easiest way is to mount the DOS -partition containing the file with Linux. - -It's possible to load your own DSP algorithms and run them with the card. -Look at the directory pss_test of snd-util-3.0.tar.gz for more info. - -AudioTrix Pro -------------- - -You have to enable the OPL3 and SB (not SB Pro or SB16) drivers in addition -to the native AudioTrix driver. Don't enable MSS or MPU drivers. - -Configuring ATP is little bit tricky since it uses so many I/O, IRQ and -DMA numbers. Using the same values than with DOS/Win is a good idea. Don't -attempt to use the same IRQ or DMA channels twice. - -The SB mode of ATP is implemented so the ATP driver just enables SB -in the proper address. The SB driver handles the rest. You have to configure -both the SB driver and the SB mode of ATP to use the same IRQ, DMA and I/O -settings. - -Also the ATP has a microcontroller for the General MIDI emulation (OPL4). -For this reason the driver asks for the name of a file containing the -microcode (TRXPRO.HEX). This file is usually located in the directory -where the DOS drivers were installed. You must have access to this file -when configuring the driver. - -If you have the effects daughtercard, it must be initialized by running -the setfx program of snd-util-3.0.tar.gz package. This step is not required -when using the (future) binary distribution version of the driver. - -Ensoniq SoundScape ------------------- - -NOTE! The new PnP SoundScape is not supported yet. Soundscape compatible - cards made by Reveal don't work with Linux. They use older revision - of the Soundscape chipset which is not fully compatible with - newer cards made by Ensoniq. - -The SoundScape driver handles initialization of MSS and MPU supports -itself so you don't need to enable other drivers than SoundScape -(enable also the /dev/dsp, /dev/sequencer and MIDI supports). - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -!!!!! !!!! -!!!!! NOTE! Before version 3.5-beta6 there WERE two sets of audio !!!! -!!!!! device files (/dev/dsp0 and /dev/dsp1). The first one WAS !!!! -!!!!! used only for card initialization and the second for audio !!!! -!!!!! purposes. It WAS required to change /dev/dsp (a symlink) to !!!! -!!!!! point to /dev/dsp1. !!!! -!!!!! !!!! -!!!!! This is not required with OSS versions 3.5-beta6 and later !!!! -!!!!! since there is now just one audio device file. Please !!!! -!!!!! change /dev/dsp to point back to /dev/dsp0 if you are !!!! -!!!!! upgrading from an earlier driver version using !!!! -!!!!! (cd /dev;rm dsp;ln -s dsp0 dsp). !!!! -!!!!! !!!! -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -The configuration program asks one DMA channel and two interrupts. One IRQ -and one DMA is used by the MSS codec. The second IRQ is required for the -MPU401 mode (you have to use different IRQs for both purposes). -There were earlier two DMA channels for SoundScape but the current driver -version requires just one. - -The SoundScape card has a Motorola microcontroller which must initialized -_after_ boot (the driver doesn't initialize it during boot). -The initialization is done by running the 'ssinit' program which is -distributed in the snd-util-3.0.tar.gz package. You have to edit two -defines in the ssinit.c and then compile the program. You may run ssinit -manually (after each boot) or add it to /etc/rc.d/rc.local. - -The ssinit program needs the microcode file that comes with the DOS/Windows -driver of the card. You will need to use version 1.30.00 or later -of the microcode file (sndscape.co0 or sndscape.co1 depending on -your card model). THE OLD sndscape.cod WILL NOT WORK. IT WILL HANG YOUR -MACHINE. The only way to get the new microcode file is to download -and install the DOS/Windows driver from ftp://ftp.ensoniq.com/pub. - -Then you have to select the proper microcode file to use: soundscape.co0 -is the right one for most cards and sndscape.co1 is for few (older) cards -made by Reveal and/or Spea. The driver has capability to detect the card -version during boot. Look at the boot log messages in /var/adm/messages -and locate the sound driver initialization message for the SoundScape -card. If the driver displays string , you have -an old card and you will need to use sndscape.co1. For other cards use -soundscape.co0. New Soundscape revisions such as Elite and PnP use -code files with higher numbers (.co2, .co3, etc.). - -NOTE! Ensoniq Soundscape VIVO is not compatible with other Soundscape cards. - Currently it's possible to use it in Linux only with OSS/Linux - drivers. - -Check /var/adm/messages after running ssinit. The driver prints -the board version after downloading the microcode file. That version -number must match the number in the name of the microcode file (extension). - -Running ssinit with a wrong version of the sndscape.co? file is not -dangerous as long as you don't try to use a file called sndscape.cod. -If you have initialized the card using a wrong microcode file (sounds -are terrible), just modify ssinit.c to use another microcode file and try -again. It's possible to use an earlier version of sndscape.co[01] but it -may sound weird. - -MAD16 (Pro) and Mozart ----------------------- - -You need to enable just the MAD16 /Mozart support when configuring -the driver. _Don't_ enable SB, MPU401 or MSS. However you will need the -/dev/audio, /dev/sequencer and MIDI supports. - -Mozart and OPTi 82C928 (the original MAD16) chips don't support -MPU401 mode so enter just 0 when the configuration program asks the -MPU/MIDI I/O base. The MAD16 Pro (OPTi 82C929) and 82C930 chips have MPU401 -mode. - -TB Tropez is based on the 82C929 chip. It has two MIDI ports. -The one connected to the MAD16 chip is the second one (there is a second -MIDI connector/pins somewhere??). If you have not connected the second MIDI -port, just disable the MIDI port of MAD16. The 'Maui' compatible synth of -Tropez is jumper configurable and not connected to the MAD16 chip (the -Maui driver can be used with it). - -Some MAD16 based cards may cause feedback, whistle or terrible noise if the -line3 mixer channel is turned too high. This happens at least with Shuttle -Sound System. Current driver versions set volume of line3 low enough so -this should not be a problem. - -If you have a MAD16 card which have an OPL4 (FM + Wave table) synthesizer -chip (_not_ an OPL3), you have to append a line containing #define MAD16_OPL4 -to the file linux/drivers/sound/local.h (after running make config). - -MAD16 cards having a CS4231 codec support full duplex mode. This mode -can be enabled by configuring the card to use two DMA channels. Possible -DMA channel pairs are: 0&1, 1&0 and 3&0. - -NOTE! Cards having an OPTi 82C924/82C925 chip work with OSS/Free only in -non-PnP mode (usually jumper selectable). The PnP mode is supported only -by OSS/Linux. - -MV Jazz (ProSonic) ------------------- - -The Jazz16 driver is just a hack made to the SB Pro driver. However it works -fairly well. You have to enable SB, SB Pro (_not_ SB16) and MPU401 supports -when configuring the driver. The configuration program asks later if you -want support for MV Jazz16 based cards (after asking SB base address). Answer -'y' here and the driver asks the second (16 bit) DMA channel. - -The Jazz16 driver uses the MPU401 driver in a way which will cause -problems if you have another MPU401 compatible card. In this case you must -give address of the Jazz16 based MPU401 interface when the config -program prompts for the MPU401 information. Then look at the MPU401 -specific section for instructions about configuring more than one MPU401 cards. - -Logitech Soundman Wave ----------------------- - -Read the above MV Jazz specific instructions first. - -The Logitech SoundMan Wave (don't confuse this with the SM16 or SM Games) is -a MV Jazz based card which has an additional OPL4 based wave table -synthesizer. The OPL4 chip is handled by an on board microcontroller -which must be initialized during boot. The config program asks if -you have a SM Wave immediately after asking the second DMA channel of jazz16. -If you answer 'y', the config program will ask name of the file containing -code to be loaded to the microcontroller. The file is usually called -MIDI0001.BIN and it's located in the DOS/Windows driver directory. The file -may also be called as TSUNAMI.BIN or something else (older cards?). - -The OPL4 synth will be inaccessible without loading the microcontroller code. - -Also remember to enable SB MPU401 support if you want to use the OPL4 mode. -(Don't enable the 'normal' MPU401 device as with some earlier driver -versions (pre 3.5-alpha8)). - -NOTE! Don't answer 'y' when the driver asks about SM Games support - (the next question after the MIDI0001.BIN name). However - answering 'y' doesn't cause damage your computer so don't panic. - -Sound Galaxies --------------- - -There are many different Sound Galaxy cards made by Aztech. The 8 bit -ones are fully SB or SB Pro compatible and there should be no problems -with them. - -The older 16 bit cards (SG Pro16, SG NX Pro16, Nova and Lyra) have -an EEPROM chip for storing the configuration data. There is a microcontroller -which initializes the card to match the EEPROM settings when the machine -is powered on. These cards actually behave just like they have jumpers -for all of the settings. Configure driver for MSS, MPU, SB/SB Pro and OPL3 -supports with these cards. - -There are some new Sound Galaxies in the market. I have no experience with -them so read the card's manual carefully. - -ESS ES1688 and ES688 'AudioDrive' based cards ---------------------------------------------- - -Support for these two ESS chips is embedded in the SB driver. -Configure these cards just like SB. Enable the 'SB MPU401 MIDI port' -if you want to use MIDI features of ES1688. ES688 doesn't have MPU mode -so you don't need to enable it (the driver uses normal SB MIDI automatically -with ES688). - -NOTE! ESS cards are not compatible with MSS/WSS so don't worry if MSS support -of OSS doesn't work with it. - -There are some ES1688/688 based sound cards and (particularly) motherboards -which use software configurable I/O port relocation feature of the chip. -This ESS proprietary feature is supported only by OSS/Linux. - -There are ES1688 based cards which use different interrupt pin assignment than -recommended by ESS (5, 7, 9/2 and 10). In this case all IRQs don't work. -At least a card called (Pearl?) Hypersound 16 supports IRQ 15 but it doesn't -work. - -ES1868 is a PnP chip which is (supposed to be) compatible with ESS1688 -probably works with OSS/Free after initialization using isapnptools. - -Reveal cards ------------- - -There are several different cards made/marketed by Reveal. Some of them -are compatible with SoundScape and some use the MAD16 chip. You may have -to look at the card and try to identify its origin. - -Diamond -------- - -The oldest (Sierra Aria based) sound cards made by Diamond are not supported -(they may work if the card is initialized using DOS). The recent (LX?) -models are based on the MAD16 chip which is supported by the driver. - -Audio Excel DSP16 ------------------ - -Support for this card is currently not functional. A new driver for it -should be available later this year. - -PCMCIA cards ------------- - -Sorry, can't help. Some cards may work and some don't. - -TI TM4000M notebooks --------------------- - -These computers have a built in sound support based on the Jazz chipset. -Look at the instructions for MV Jazz (above). It's also important to note -that there is something wrong with the mouse port and sound at least on -some TM models. Don't enable the "C&T 82C710 mouse port support" when -configuring Linux. Having it enabled is likely to cause mysterious problems -and kernel failures when sound is used. - -miroSOUND ---------- - -The miroSOUND PCM1-pro, PCM12 and PCM20 radio has been used -successfully. These cards are based on the MAD16, OPL4, and CS4231A chips -and everything said in the section about MAD16 cards applies here, -too. The only major difference between the PCMxx and other MAD16 cards -is that instead of the mixer in the CS4231 codec a separate mixer -controlled by an on-board 80C32 microcontroller is used. Control of -the mixer takes place via the ACI (miro's audio control interface) -protocol that is implemented in a separate lowlevel driver. Make sure -you compile this ACI driver together with the normal MAD16 support -when you use a miroSOUND PCMxx card. The ACI mixer is controlled by -/dev/mixer and the CS4231 mixer by /dev/mixer1 (depends on load -time). Only in special cases you want to change something regularly on -the CS4231 mixer. - -The miroSOUND PCM12 and PCM20 radio is capable of full duplex -operation (simultaneous PCM replay and recording), which allows you to -implement nice real-time signal processing audio effect software and -network telephones. The ACI mixer has to be switched into the "solo" -mode for duplex operation in order to avoid feedback caused by the -mixer (input hears output signal). You can de-/activate this mode -through toggling the record button for the wave controller with an -OSS-mixer. - -The PCM20 contains a radio tuner, which is also controlled by -ACI. This radio tuner is supported by the ACI driver together with the -miropcm20.o module. Also the 7-band equalizer is integrated -(limited by the OSS-design). Development has started and maybe -finished for the RDS decoder on this card, too. You will be able to -read RadioText, the Programme Service name, Programme TYpe and -others. Even the v4l radio module benefits from it with a refined -strength value. See aci.[ch] and miropcm20*.[ch] for more details. - -The following configuration parameters have worked fine for the PCM12 -in Markus Kuhn's system, many other configurations might work, too: -CONFIG_MAD16_BASE=0x530, CONFIG_MAD16_IRQ=11, CONFIG_MAD16_DMA=3, -CONFIG_MAD16_DMA2=0, CONFIG_MAD16_MPU_BASE=0x330, CONFIG_MAD16_MPU_IRQ=10, -DSP_BUFFSIZE=65536, SELECTED_SOUND_OPTIONS=0x00281000. - -Bas van der Linden is using his PCM1-pro with a configuration that -differs in: CONFIG_MAD16_IRQ=7, CONFIG_MAD16_DMA=1, CONFIG_MAD16_MPU_IRQ=9 - -Compaq Deskpro XL ------------------ - -The builtin sound hardware of Compaq Deskpro XL is now supported. -You need to configure the driver with MSS and OPL3 supports enabled. -In addition you need to manually edit linux/drivers/sound/local.h and -to add a line containing "#define DESKPROXL" if you used -make menuconfig/xconfig. - -Others? -------- - -Since there are so many different sound cards, it's likely that I have -forgotten to mention many of them. Please inform me if you know yet another -card which works with Linux, please inform me (or is anybody else -willing to maintain a database of supported cards (just like in XF86)?). - -Cards not supported yet -======================= - -Please check the version of sound driver you are using before -complaining that your card is not supported. It's possible you are -using a driver version which was released months before your card was -introduced. - -First of all, there is an easy way to make most sound cards work with Linux. -Just use the DOS based driver to initialize the card to a known state, then use -loadlin.exe to boot Linux. If Linux is configured to use the same I/O, IRQ and -DMA numbers as DOS, the card could work. -(ctrl-alt-del can be used in place of loadlin.exe but it doesn't work with -new motherboards). This method works also with all/most PnP sound cards. - -Don't get fooled with SB compatibility. Most cards are compatible with -SB but that may require a TSR which is not possible with Linux. If -the card is compatible with MSS, it's a better choice. Some cards -don't work in the SB and MSS modes at the same time. - -Then there are cards which are no longer manufactured and/or which -are relatively rarely used (such as the 8 bit ProAudioSpectrum -models). It's extremely unlikely that such cards ever get supported. -Adding support for a new card requires much work and increases time -required in maintaining the driver (some changes need to be done -to all low level drivers and be tested too, maybe with multiple -operating systems). For this reason I have made a decision to not support -obsolete cards. It's possible that someone else makes a separately -distributed driver (diffs) for the card. - -Writing a driver for a new card is not possible if there are no -programming information available about the card. If you don't -find your new card from this file, look from the home page -(http://www.opensound.com/ossfree). Then please contact -manufacturer of the card and ask if they have (or are willing to) -released technical details of the card. Do this before contacting me. I -can only answer 'no' if there are no programming information available. - -I have made decision to not accept code based on reverse engineering -to the driver. There are three main reasons: First I don't want to break -relationships to sound card manufacturers. The second reason is that -maintaining and supporting a driver without any specs will be a pain. -The third reason is that companies have freedom to refuse selling their -products to other than Windows users. - -Some companies don't give low level technical information about their -products to public or at least their require signing a NDA. It's not -possible to implement a freeware driver for them. However it's possible -that support for such cards become available in the commercial version -of this driver (see http://www.4Front-tech.com/oss.html for more info). - -There are some common audio chipsets that are not supported yet. For example -Sierra Aria and IBM Mwave. It's possible that these architectures -get some support in future but I can't make any promises. Just look -at the home page (http://www.opensound.com/ossfree/) -for latest info. - -Information about unsupported sound cards and chipsets is welcome as well -as free copies of sound cards, SDKs and operating systems. - -If you have any corrections and/or comments, please contact me. - -Hannu Savolainen -hannu@opensound.com - -home page of OSS/Free: http://www.opensound.com/ossfree - -home page of commercial OSS -(Open Sound System) drivers: http://www.opensound.com/oss.html diff --git a/Documentation/sound/oss/README.modules b/Documentation/sound/oss/README.modules deleted file mode 100644 index cdc039421a4606d73bb85d8a71986345369cf0e2..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/README.modules +++ /dev/null @@ -1,106 +0,0 @@ -Building a modular sound driver -================================ - - The following information is current as of linux-2.1.85. Check the other -readme files, especially README.OSS, for information not specific to -making sound modular. - - First, configure your kernel. This is an idea of what you should be -setting in the sound section: - - Sound card support - - 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support - - I have SoundBlaster. Select your card from the list. - - Generic OPL2/OPL3 FM synthesizer support - FM synthesizer (YM3812/OPL-3) support - - If you don't set these, you will probably find you can play .wav files -but not .midi. As the help for them says, set them unless you know your -card does not use one of these chips for FM support. - - Once you are configured, make zlilo, modules, modules_install; reboot. -Note that it is no longer necessary or possible to configure sound in the -drivers/sound dir. Now one simply configures and makes one's kernel and -modules in the usual way. - - Then, add to your /etc/modprobe.d/oss.conf something like: - -alias char-major-14-* sb -install sb /sbin/modprobe -i sb && /sbin/modprobe adlib_card -options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 -options adlib_card io=0x388 # FM synthesizer - - Alternatively, if you have compiled in kernel level ISAPnP support: - -alias char-major-14 sb -softdep sb post: adlib_card -options adlib_card io=0x388 - - The effect of this is that the sound driver and all necessary bits and -pieces autoload on demand, assuming you use kerneld (a sound choice) and -autoclean when not in use. Also, options for the device drivers are -set. They will not work without them. Change as appropriate for your card. -If you are not yet using the very cool kerneld, you will have to "modprobe --k sb" yourself to get things going. Eventually things may be fixed so -that this kludgery is not necessary; for the time being, it seems to work -well. - - Replace 'sb' with the driver for your card, and give it the right -options. To find the filename of the driver, look in -/lib/modules//misc. Mine looks like: - -adlib_card.o # This is the generic OPLx driver -opl3.o # The OPL3 driver -sb.o # <> -sound.o # The sound driver -uart401.o # Used by sb, maybe other cards - - Whichever card you have, try feeding it the options that would be the -default if you were making the driver wired, not as modules. You can -look at function referred to by module_init() for the card to see what -args are expected. - - Note that at present there is no way to configure the io, irq and other -parameters for the modular drivers as one does for the wired drivers.. One -needs to pass the modules the necessary parameters as arguments, either -with /etc/modprobe.d/*.conf or with command-line args to modprobe, e.g. - -modprobe sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 -modprobe adlib_card io=0x388 - - recommend using /etc/modprobe.d/*.conf. - -Persistent DMA Buffers: - -The sound modules normally allocate DMA buffers during open() and -deallocate them during close(). Linux can often have problems allocating -DMA buffers for ISA cards on machines with more than 16MB RAM. This is -because ISA DMA buffers must exist below the 16MB boundary and it is quite -possible that we can't find a large enough free block in this region after -the machine has been running for any amount of time. The way to avoid this -problem is to allocate the DMA buffers during module load and deallocate -them when the module is unloaded. For this to be effective we need to load -the sound modules right after the kernel boots, either manually or by an -init script, and keep them around until we shut down. This is a little -wasteful of RAM, but it guarantees that sound always works. - -To make the sound driver use persistent DMA buffers we need to pass the -sound.o module a "dmabuf=1" command-line argument. This is normally done -in /etc/modprobe.d/*.conf files like so: - -options sound dmabuf=1 - -If you have 16MB or less RAM or a PCI sound card, this is wasteful and -unnecessary. It is possible that machine with 16MB or less RAM will find -this option useful, but if your machine is so memory-starved that it -cannot find a 64K block free, you will be wasting even more RAM by keeping -the sound modules loaded and the DMA buffers allocated when they are not -needed. The proper solution is to upgrade your RAM. But you do also have -this improper solution as well. Use it wisely. - - I'm afraid I know nothing about anything but my setup, being more of a -text-mode guy anyway. If you have options for other cards or other helpful -hints, send them to me, Jim Bray, jb@as220.org, http://as220.org/jb. diff --git a/Documentation/sound/oss/README.ymfsb b/Documentation/sound/oss/README.ymfsb deleted file mode 100644 index b6b77906b58d5f0c161c03056b5d72073c53f6e0..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/README.ymfsb +++ /dev/null @@ -1,107 +0,0 @@ -Legacy audio driver for YMF7xx PCI cards. - - -FIRST OF ALL -============ - - This code references YAMAHA's sample codes and data sheets. - I respect and thank for all people they made open the information - about YMF7xx cards. - - And this codes heavily based on Jeff Garzik 's - old VIA 82Cxxx driver (via82cxxx.c). I also respect him. - - -DISCLIMER -========= - - This driver is currently at early ALPHA stage. It may cause serious - damage to your computer when used. - PLEASE USE IT AT YOUR OWN RISK. - - -ABOUT THIS DRIVER -================= - - This code enables you to use your YMF724[A-F], YMF740[A-C], YMF744, YMF754 - cards. When enabled, your card acts as "SoundBlaster Pro" compatible card. - It can only play 22.05kHz / 8bit / Stereo samples, control external MIDI - port. - If you want to use your card as recent "16-bit" card, you should use - Alsa or OSS/Linux driver. Of course you can write native PCI driver for - your cards :) - - -USAGE -===== - - # modprobe ymfsb (options) - - -OPTIONS FOR MODULE -================== - - io : SB base address (0x220, 0x240, 0x260, 0x280) - synth_io : OPL3 base address (0x388, 0x398, 0x3a0, 0x3a8) - dma : DMA number (0,1,3) - master_volume: AC'97 PCM out Vol (0-100) - spdif_out : SPDIF-out flag (0:disable 1:enable) - - These options will change in future... - - -FREQUENCY -========= - - When playing sounds via this driver, you will hear its pitch is slightly - lower than original sounds. Since this driver recognizes your card acts - with 21.739kHz sample rates rather than 22.050kHz (I think it must be - hardware restriction). So many players become tone deafness. - To prevent this, you should express some options to your sound player - that specify correct sample frequency. For example, to play your MP3 file - correctly with mpg123, specify the frequency like following: - - % mpg123 -r 21739 foo.mp3 - - -SPDIF OUT -========= - - With installing modules with option 'spdif_out=1', you can enjoy your - sounds from SPDIF-out of your card (if it had). - Its Fs is fixed to 48kHz (It never means the sample frequency become - up to 48kHz. All sounds via SPDIF-out also 22kHz samples). So your - digital-in capable components has to be able to handle 48kHz Fs. - - -COPYING -======= - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - -TODO -==== - * support for multiple cards - (set the different SB_IO,MPU_IO,OPL_IO for each cards) - - * support for OPL (dmfm) : There will be no requirements... :-< - - -AUTHOR -====== - - Daisuke Nagano - diff --git a/Documentation/sound/oss/SoundPro b/Documentation/sound/oss/SoundPro deleted file mode 100644 index 9d4db1f29d3ce1f1f77f831c8a94e61933816c3f..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/SoundPro +++ /dev/null @@ -1,105 +0,0 @@ -Documentation for the SoundPro CMI8330 extensions in the WSS driver (ad1848.o) ------------------------------------------------------------------------------- - -( Be sure to read Documentation/sound/oss/CMI8330 too ) - -Ion Badulescu, ionut@cs.columbia.edu -February 24, 1999 - -(derived from the OPL3-SA2 documentation by Scott Murray) - -The SoundPro CMI8330 (ISA) is a chip usually found on some Taiwanese -motherboards. The official name in the documentation is CMI8330, SoundPro -is the nickname and the big inscription on the chip itself. - -The chip emulates a WSS as well as a SB16, but it has certain differences -in the mixer section which require separate support. It also emulates an -MPU401 and an OPL3 synthesizer, so you probably want to enable support -for these, too. - -The chip identifies itself as an AD1848, but its mixer is significantly -more advanced than the original AD1848 one. If your system works with -either WSS or SB16 and you are having problems with some mixer controls -(no CD audio, no line-in, etc), you might want to give this driver a try. -Detection should work, but it hasn't been widely tested, so it might still -mis-identify the chip. You can still force soundpro=1 in the modprobe -parameters for ad1848. Please let me know if it happens to you, so I can -adjust the detection routine. - -The chip is capable of doing full-duplex, but since the driver sees it as an -AD1848, it cannot take advantage of this. Moreover, the full-duplex mode is -not achievable through the WSS interface, b/c it needs a dma16 line which is -assigned only to the SB16 subdevice (with isapnp). Windows documentation -says the user must use WSS Playback and SB16 Recording for full-duplex, so -it might be possible to do the same thing under Linux. You can try loading -up both ad1848 and sb then use one for playback and the other for -recording. I don't know if this works, b/c I haven't tested it. Anyway, if -you try it, be very careful: the SB16 mixer *mostly* works, but certain -settings can have unexpected effects. Use the WSS mixer for best results. - -There is also a PCI SoundPro chip. I have not seen this chip, so I have -no idea if the driver will work with it. I suspect it won't. - -As with PnP cards, some configuration is required. There are two ways -of doing this. The most common is to use the isapnptools package to -initialize the card, and use the kernel module form of the sound -subsystem and sound drivers. Alternatively, some BIOS's allow manual -configuration of installed PnP devices in a BIOS menu, which should -allow using the non-modular sound drivers, i.e. built into the kernel. -Since in this latter case you cannot use module parameters, you will -have to enable support for the SoundPro at compile time. - -The IRQ and DMA values can be any that are considered acceptable for a -WSS. Assuming you've got isapnp all happy, then you should be able to -do something like the following (which *must* match the isapnp/BIOS -configuration): - -modprobe ad1848 io=0x530 irq=11 dma=0 soundpro=1 --and maybe- -modprobe sb io=0x220 irq=5 dma=1 dma16=5 - --then- -modprobe mpu401 io=0x330 irq=9 -modprobe opl3 io=0x388 - -If all goes well and you see no error messages, you should be able to -start using the sound capabilities of your system. If you get an -error message while trying to insert the module(s), then make -sure that the values of the various arguments match what you specified -in your isapnp configuration file, and that there is no conflict with -another device for an I/O port or interrupt. Checking the contents of -/proc/ioports and /proc/interrupts can be useful to see if you're -butting heads with another device. - -If you do not see the chipset version message, and none of the other -messages present in the system log are helpful, try adding 'debug=1' -to the ad1848 parameters, email me the syslog results and I'll do -my best to help. - -Lastly, if you're using modules and want to set up automatic module -loading with kmod, the kernel module loader, here is the section I -currently use in my conf.modules file: - -# Sound -post-install sound modprobe -k ad1848; modprobe -k mpu401; modprobe -k opl3 -options ad1848 io=0x530 irq=11 dma=0 -options sb io=0x220 irq=5 dma=1 dma16=5 -options mpu401 io=0x330 irq=9 -options opl3 io=0x388 - -The above ensures that ad1848 will be loaded whenever the sound system -is being used. - -Good luck. - -Ion - -NOT REALLY TESTED: -- recording -- recording device selection -- full-duplex - -TODO: -- implement mixer support for surround, loud, digital CD switches. -- come up with a scheme which allows recording volumes for each subdevice. -This is a major OSS API change. diff --git a/Documentation/sound/oss/Soundblaster b/Documentation/sound/oss/Soundblaster deleted file mode 100644 index b288d464ba8b0c80cd3861dd990fb3fc137d4be4..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/Soundblaster +++ /dev/null @@ -1,53 +0,0 @@ -modprobe sound -insmod uart401 -insmod sb ... - -This loads the driver for the Sound Blaster and assorted clones. Cards that -are covered by other drivers should not be using this driver. - -The Sound Blaster module takes the following arguments - -io I/O address of the Sound Blaster chip (0x220,0x240,0x260,0x280) -irq IRQ of the Sound Blaster chip (5,7,9,10) -dma 8-bit DMA channel for the Sound Blaster (0,1,3) -dma16 16-bit DMA channel for SB16 and equivalent cards (5,6,7) -mpu_io I/O for MPU chip if present (0x300,0x330) - -sm_games=1 Set if you have a Logitech soundman games -acer=1 Set this to detect cards in some ACER notebooks -mwave_bug=1 Set if you are trying to use this driver with mwave (see on) -type Use this to specify a specific card type - -The following arguments are taken if ISAPnP support is compiled in - -isapnp=0 Set this to disable ISAPnP detection (use io=0xXXX etc. above) -multiple=0 Set to disable detection of multiple Soundblaster cards. - Consider it a bug if this option is needed, and send in a - report. -pnplegacy=1 Set this to be able to use a PnP card(s) along with a single - non-PnP (legacy) card. Above options for io, irq, etc. are - needed, and will apply only to the legacy card. -reverse=1 Reverses the order of the search in the PnP table. -uart401=1 Set to enable detection of mpu devices on some clones. -isapnpjump=n Jumps to slot n in the driver's PnP table. Use the source, - Luke. - -You may well want to load the opl3 driver for synth music on most SB and -clone SB devices - -insmod opl3 io=0x388 - -Using Mwave - -To make this driver work with Mwave you must set mwave_bug. You also need -to warm boot from DOS/Windows with the required firmware loaded under this -OS. IBM are being difficult about documenting how to load this firmware. - -Avance Logic ALS007 - -This card is supported; see the separate file ALS007 for full details. - -Avance Logic ALS100 - -This card is supported; setup should be as for a standard Sound Blaster 16. -The driver will identify the audio device as a "Sound Blaster 16 (ALS-100)". diff --git a/Documentation/sound/oss/Tropez+ b/Documentation/sound/oss/Tropez+ deleted file mode 100644 index b93a6b734fc0694d8ee28f8ad7d43e5989d3ccac..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/Tropez+ +++ /dev/null @@ -1,26 +0,0 @@ -From: Paul Barton-Davis - -Here is the configuration I use with a Tropez+ and my modular -driver: - - alias char-major-14 wavefront - alias synth0 wavefront - alias mixer0 cs4232 - alias audio0 cs4232 - pre-install wavefront modprobe "-k" "cs4232" - post-install wavefront modprobe "-k" "opl3" - options wavefront io=0x200 irq=9 - options cs4232 synthirq=9 synthio=0x200 io=0x530 irq=5 dma=1 dma2=0 - options opl3 io=0x388 - -Things to note: - - the wavefront options "io" and "irq" ***MUST*** match the "synthio" - and "synthirq" cs4232 options. - - you can do without the opl3 module if you don't - want to use the OPL/[34] synth on the soundcard - - the opl3 io parameter is conventionally not adjustable. - -Please see drivers/sound/README.wavefront for more details. diff --git a/Documentation/sound/oss/VIBRA16 b/Documentation/sound/oss/VIBRA16 deleted file mode 100644 index 68a5a46beb88ed867af17c04a8c0dfd4cbffe968..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/VIBRA16 +++ /dev/null @@ -1,80 +0,0 @@ -Sound Blaster 16X Vibra addendum --------------------------------- -by Marius Ilioaea - Stefan Laudat - -Sat Mar 6 23:55:27 EET 1999 - - Hello again, - - Playing with a SB Vibra 16x soundcard we found it very difficult -to setup because the kernel reported a lot of DMA errors and wouldn't -simply play any sound. - A good starting point is that the vibra16x chip full-duplex facility -is neither still exploited by the sb driver found in the linux kernel -(tried it with a 2.2.2-ac7), nor in the commercial OSS package (it reports -it as half-duplex soundcard). Oh, I almost forgot, the RedHat sndconfig -failed detecting it ;) - So, the big problem still remains, because the sb module wants a -8-bit and a 16-bit dma, which we could not allocate for vibra... it supports -only two 8-bit dma channels, the second one will be passed to the module -as a 16 bit channel, the kernel will yield about that but everything will -be okay, trust us. - The only inconvenient you may find is that you will have -some sound playing jitters if you have HDD dma support enabled - but this -will happen with almost all soundcards... - - A fully working isapnp.conf is just here: - - - -(READPORT 0x0203) -(ISOLATE PRESERVE) -(IDENTIFY *) -(VERBOSITY 2) -(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING -# SB 16 and OPL3 devices -(CONFIGURE CTL00f0/-1 (LD 0 -(INT 0 (IRQ 5 (MODE +E))) -(DMA 0 (CHANNEL 1)) -(DMA 1 (CHANNEL 3)) -(IO 0 (SIZE 16) (BASE 0x0220)) -(IO 2 (SIZE 4) (BASE 0x0388)) -(NAME "CTL00f0/-1[0]{Audio }") -(ACT Y) -)) - -# Joystick device - only if you need it :-/ - -(CONFIGURE CTL00f0/-1 (LD 1 -(IO 0 (SIZE 1) (BASE 0x0200)) -(NAME "CTL00f0/-1[1]{Game }") -(ACT Y) -)) -(WAITFORKEY) - - - - So, after a good kernel modules compilation and a 'depmod -a kernel_ver' -you may want to: - -modprobe sb io=0x220 irq=5 dma=1 dma16=3 - - Or, take the hard way: - -modprobe soundcore -modprobe sound -modprobe uart401 -modprobe sb io=0x220 irq=5 dma=1 dma16=3 -# do you need MIDI? -modprobe opl3=0x388 - - Just in case, the kernel sound support should be: - -CONFIG_SOUND=m -CONFIG_SOUND_OSS=m -CONFIG_SOUND_SB=m - - Enjoy your new noisy Linux box! ;) - - diff --git a/Documentation/sound/oss/WaveArtist b/Documentation/sound/oss/WaveArtist deleted file mode 100644 index f4f3407cd818ebbd72a8df277b2fcfe6351473e9..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/WaveArtist +++ /dev/null @@ -1,170 +0,0 @@ - - (the following is from the armlinux CVS) - - WaveArtist mixer and volume levels can be accessed via these commands: - - nn30 read registers nn, where nn = 00 - 09 for mixer settings - 0a - 13 for channel volumes - mm31 write the volume setting in pairs, where mm = (nn - 10) / 2 - rr32 write the mixer settings in pairs, where rr = nn/2 - xx33 reset all settings to default - 0y34 select mono source, y=0 = left, y=1 = right - - bits - nn 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 00 | 0 | 0 0 1 1 | left line mixer gain | left aux1 mixer gain |lmute| -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 01 | 0 | 0 1 0 1 | left aux2 mixer gain | right 2 left mic gain |mmute| -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 02 | 0 | 0 1 1 1 | left mic mixer gain | left mic | left mixer gain |dith | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 03 | 0 | 1 0 0 1 | left mixer input select |lrfg | left ADC gain | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 04 | 0 | 1 0 1 1 | right line mixer gain | right aux1 mixer gain |rmute| -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 05 | 0 | 1 1 0 1 | right aux2 mixer gain | left 2 right mic gain |test | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 06 | 0 | 1 1 1 1 | right mic mixer gain | right mic |right mixer gain |rbyps| -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 07 | 1 | 0 0 0 1 | right mixer select |rrfg | right ADC gain | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 08 | 1 | 0 0 1 1 | mono mixer gain |right ADC mux sel|left ADC mux sel | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 09 | 1 | 0 1 0 1 |loopb|left linout|loop|ADCch|TxFch|OffCD|test |loopb|loopb|osamp| -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 0a | 0 | left PCM channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 0b | 0 | right PCM channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 0c | 0 | left FM channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 0d | 0 | right FM channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 0e | 0 | left wavetable channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 0f | 0 | right wavetable channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 10 | 0 | left PCM expansion channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 11 | 0 | right PCM expansion channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 12 | 0 | left FM expansion channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - 13 | 0 | right FM expansion channel volume | -----+---+------------+-----+-----+-----+----+-----+-----+-----+-----+-----+-----+-----+ - - lmute: left mute - mmute: mono mute - dith: dithds - lrfg: - rmute: right mute - rbyps: right bypass - rrfg: - ADCch: - TxFch: - OffCD: - osamp: - - And the following diagram is derived from the description in the CVS archive: - - MIC L (mouthpiece) - +------+ - -->PreAmp>-\ - +--^---+ | - | | - r2b4-5 | +--------+ - /----*-------------------------------->5 | - | | | - | /----------------------------------->4 | - | | | | - | | /--------------------------------->3 1of5 | +---+ - | | | | mux >-->AMP>--> ADC L - | | | /------------------------------->2 | +-^-+ - | | | | | | | - Line | | | | +----+ +------+ +---+ /---->1 | r3b3-0 - ------------*->mute>--> Gain >--> | | | | - L | | | +----+ +------+ | | | *->0 | - | | | | | | +---^----+ - Aux2 | | | +----+ +------+ | | | | - ----------*--->mute>--> Gain >--> M | | r8b0-2 - L | | +----+ +------+ | | | - | | | | \------\ - Aux1 | | +----+ +------+ | | | - --------*----->mute>--> Gain >--> I | | - L | +----+ +------+ | | | - | | | | - | +----+ +------+ | | +---+ | - *------->mute>--> Gain >--> X >-->AMP>--* - | +----+ +------+ | | +-^-+ | - | | | | | - | +----+ +------+ | | r2b1-3 | - | /----->mute>--> Gain >--> E | | - | | +----+ +------+ | | | - | | | | | - | | +----+ +------+ | | | - | | /--->mute>--> Gain >--> R | | - | | | +----+ +------+ | | | - | | | | | | r9b8-9 - | | | +----+ +------+ | | | | - | | | /->mute>--> Gain >--> | | +---v---+ - | | | | +----+ +------+ +---+ /-*->0 | - DAC | | | | | | | - ------------*----------------------------------->? | +----+ - L | | | | | Mux >-->mute>--> L output - | | | | /->? | +--^-+ - | | | | | | | | - | | | /--------->? | r0b0 - | | | | | | +-------+ - | | | | | | - Mono | | | | | | +-------+ - ----------* | \---> | +----+ - | | | | | | Mix >-->mute>--> Mono output - | | | | *-> | +--^-+ - | | | | | +-------+ | - | | | | | r1b0 - DAC | | | | | +-------+ - ------------*-------------------------*--------->1 | +----+ - R | | | | | | Mux >-->mute>--> R output - | | | | +----+ +------+ +---+ *->0 | +--^-+ - | | | \->mute>--> Gain >--> | | +---^---+ | - | | | +----+ +------+ | | | | r5b0 - | | | | | | r6b0 - | | | +----+ +------+ | | | - | | \--->mute>--> Gain >--> M | | - | | +----+ +------+ | | | - | | | | | - | | +----+ +------+ | | | - | *----->mute>--> Gain >--> I | | - | | +----+ +------+ | | | - | | | | | - | | +----+ +------+ | | +---+ | - \------->mute>--> Gain >--> X >-->AMP>--* - | +----+ +------+ | | +-^-+ | - /--/ | | | | - Aux1 | +----+ +------+ | | r6b1-3 | - -------*------>mute>--> Gain >--> E | | - R | | +----+ +------+ | | | - | | | | | - Aux2 | | +----+ +------+ | | /------/ - ---------*---->mute>--> Gain >--> R | | - R | | | +----+ +------+ | | | - | | | | | | +--------+ - Line | | | +----+ +------+ | | | *->0 | - -----------*-->mute>--> Gain >--> | | | | - R | | | | +----+ +------+ +---+ \---->1 | - | | | | | | - | | | \-------------------------------->2 | +---+ - | | | | Mux >-->AMP>--> ADC R - | | \---------------------------------->3 | +-^-+ - | | | | | - | \------------------------------------>4 | r7b3-0 - | | | - \-----*-------------------------------->5 | - | +---^----+ - r6b4-5 | | - | | r8b3-5 - +--v---+ | - -->PreAmp>-/ - +------+ - MIC R (electret mic) diff --git a/Documentation/sound/oss/btaudio b/Documentation/sound/oss/btaudio deleted file mode 100644 index effdb9a3f898885baca9485c2f6ed88e427a0811..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/btaudio +++ /dev/null @@ -1,92 +0,0 @@ - -Intro -===== - -people start bugging me about this with questions, looks like I -should write up some documentation for this beast. That way I -don't have to answer that much mails I hope. Yes, I'm lazy... - - -You might have noticed that the bt878 grabber cards have actually -_two_ PCI functions: - -$ lspci -[ ... ] -00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) -00:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) -[ ... ] - -The first does video, it is backward compatible to the bt848. The second -does audio. btaudio is a driver for the second function. It's a sound -driver which can be used for recording sound (and _only_ recording, no -playback). As most TV cards come with a short cable which can be plugged -into your sound card's line-in you probably don't need this driver if all -you want to do is just watching TV... - - -Driver Status -============= - -Still somewhat experimental. The driver should work stable, i.e. it -should'nt crash your box. It might not work as expected, have bugs, -not being fully OSS API compliant, ... - -Latest versions are available from http://bytesex.org/bttv/, the -driver is in the bttv tarball. Kernel patches might be available too, -have a look at http://bytesex.org/bttv/listing.html. - -The chip knows two different modes. btaudio registers two dsp -devices, one for each mode. They can not be used at the same time. - - -Digital audio mode -================== - -The chip gives you 16 bit stereo sound. The sample rate depends on -the external source which feeds the bt878 with digital sound via I2S -interface. There is a insmod option (rate) to tell the driver which -sample rate the hardware uses (32000 is the default). - -One possible source for digital sound is the msp34xx audio processor -chip which provides digital sound via I2S with 32 kHz sample rate. My -Hauppauge board works this way. - -The Osprey-200 reportly gives you digital sound with 44100 Hz sample -rate. It is also possible that you get no sound at all. - - -analog mode (A/D) -================= - -You can tell the driver to use this mode with the insmod option "analog=1". -The chip has three analog inputs. Consequently you'll get a mixer device -to control these. - -The analog mode supports mono only. Both 8 + 16 bit. Both are _signed_ -int, which is uncommon for the 8 bit case. Sample rate range is 119 kHz -to 448 kHz. Yes, the number of digits is correct. The driver supports -downsampling by powers of two, so you can ask for more usual sample rates -like 44 kHz too. - -With my Hauppauge I get noisy sound on the second input (mapped to line2 -by the mixer device). Others get a useable signal on line1. - - -some examples -============= - -* read audio data from btaudio (dsp2), send to es1730 (dsp,dsp1): - $ sox -w -r 32000 -t ossdsp /dev/dsp2 -t ossdsp /dev/dsp - -* read audio data from btaudio, send to esound daemon (which might be - running on another host): - $ sox -c 2 -w -r 32000 -t ossdsp /dev/dsp2 -t sw - | esdcat -r 32000 - $ sox -c 1 -w -r 32000 -t ossdsp /dev/dsp2 -t sw - | esdcat -m -r 32000 - - -Have fun, - - Gerd - --- -Gerd Knorr diff --git a/Documentation/sound/oss/mwave b/Documentation/sound/oss/mwave deleted file mode 100644 index 5fbcb160927589fc54f38ac423a54a85692ff11c..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/mwave +++ /dev/null @@ -1,185 +0,0 @@ - How to try to survive an IBM Mwave under Linux SB drivers - - -+ IBM have now released documentation of sorts and Torsten is busy - trying to make the Mwave work. This is not however a trivial task. - ----------------------------------------------------------------------------- - -OK, first thing - the IRQ problem IS a problem, whether the test is bypassed or -not. It is NOT a Linux problem, but an MWAVE problem that is fixed with the -latest MWAVE patches. So, in other words, don't bypass the test for MWAVES! - -I have Windows 95 on /dev/hda1, swap on /dev/hda2, and Red Hat 5 on /dev/hda3. - -The steps, then: - - Boot to Linux. - Mount Windows 95 file system (assume mount point = /dos95). - mkdir /dos95/linux - mkdir /dos95/linux/boot - mkdir /dos95/linux/boot/parms - - Copy the kernel, any initrd image, and loadlin to /dos95/linux/boot/. - - Reboot to Windows 95. - - Edit C:/msdos.sys and add or change the following: - - Logo=0 - BootGUI=0 - - Note that msdos.sys is a text file but it needs to be made 'unhidden', - readable and writable before it can be edited. This can be done with - DOS' "attrib" command. - - Edit config.sys to have multiple config menus. I have one for windows 95 and - five for Linux, like this: ------------- -[menu] -menuitem=W95, Windows 95 -menuitem=LINTP, Linux - ThinkPad -menuitem=LINTP3, Linux - ThinkPad Console -menuitem=LINDOC, Linux - Docked -menuitem=LINDOC3, Linux - Docked Console -menuitem=LIN1, Linux - Single User Mode -REM menudefault=W95,10 - -[W95] - -[LINTP] - -[LINDOC] - -[LINTP3] - -[LINDOC3] - -[LIN1] - -[COMMON] -FILES=30 -REM Please read README.TXT in C:\MWW subdirectory before changing the DOS= statement. -DOS=HIGH,UMB -DEVICE=C:\MWW\MANAGER\MWD50430.EXE -SHELL=c:\command.com /e:2048 -------------------- - -The important things are the SHELL and DEVICE statements. - - Then change autoexec.bat. Basically everything in there originally should be - done ONLY when Windows 95 is booted. Then you add new things specifically - for Linux. Mine is as follows - ---------------- -@ECHO OFF -if "%CONFIG%" == "W95" goto W95 - -REM -REM Linux stuff -REM -SET MWPATH=C:\MWW\DLL;C:\MWW\MWGAMES;C:\MWW\DSP -SET BLASTER=A220 I5 D1 -SET MWROOT=C:\MWW -SET LIBPATH=C:\MWW\DLL -SET PATH=C:\WINDOWS;C:\MWW\DLL; -CALL MWAVE START NOSHOW -c:\linux\boot\loadlin.exe @c:\linux\boot\parms\%CONFIG%.par - -:W95 -REM -REM Windows 95 stuff -REM -c:\toolkit\guard -SET MSINPUT=C:\MSINPUT -SET MWPATH=C:\MWW\DLL;C:\MWW\MWGAMES;C:\MWW\DSP -REM The following is used by DOS games to recognize Sound Blaster hardware. -REM If hardware settings are changed, please change this line as well. -REM See the Mwave README file for instructions. -SET BLASTER=A220 I5 D1 -SET MWROOT=C:\MWW -SET LIBPATH=C:\MWW\DLL -SET PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;E:\ORAWIN95\BIN;f:\msdev\bin;e:\v30\bin.dbg;v:\devt\v30\bin;c:\JavaSDK\Bin;C:\MWW\DLL; -SET INCLUDE=f:\MSDEV\INCLUDE;F:\MSDEV\MFC\INCLUDE -SET LIB=F:\MSDEV\LIB;F:\MSDEV\MFC\LIB -win - ------------------------- - -Now build a file in c:\linux\boot\parms for each Linux config that you have. - -For example, my LINDOC3 config is for a docked Thinkpad at runlevel 3 with no -initrd image, and has a parameter file named LINDOC3.PAR in c:\linux\boot\parms: - ------------------------ -# LOADLIN @param_file image=other_image root=/dev/other -# -# Linux Console in docking station -# -c:\linux\boot\zImage.krn # First value must be filename of Linux kernel. -root=/dev/hda3 # device which gets mounted as root FS -ro # Other kernel arguments go here. -apm=off -doc=yes -3 ------------------------ - -The doc=yes parameter is an environment variable used by my init scripts, not -a kernel argument. - -However, the apm=off parameter IS a kernel argument! APM, at least in my setup, -causes the kernel to crash when loaded via loadlin (but NOT when loaded via -LILO). The APM stuff COULD be forced out of the kernel via the kernel compile -options. Instead, I got an unofficial patch to the APM drivers that allows them -to be dynamically deactivated via kernel arguments. Whatever you chose to -document, APM, it seems, MUST be off for setups like mine. - -Now make sure C:\MWW\MWCONFIG.REF looks like this: - ----------------------- -[NativeDOS] -Default=SB1.5 -SBInputSource=CD -SYNTH=FM -QSound=OFF -Reverb=OFF -Chorus=OFF -ReverbDepth=5 -ChorusDepth=5 -SBInputVolume=5 -SBMainVolume=10 -SBWaveVolume=10 -SBSynthVolume=10 -WaveTableVolume=10 -AudioPowerDriver=ON - -[FastCFG] -Show=No -HideOption=Off ------------------------------ - -OR the Default= line COULD be - -Default=SBPRO - -Reboot to Windows 95 and choose Linux. When booted, use sndconfig to configure -the sound modules and voilà - ThinkPad sound with Linux. - -Now the gotchas - you can either have CD sound OR Mixers but not both. That's a -problem with the SB1.5 (CD sound) or SBPRO (Mixers) settings. No one knows why -this is! - -For some reason MPEG3 files, when played through mpg123, sound like they -are playing at 1/8th speed - not very useful! If you have ANY insight -on why this second thing might be happening, I would be grateful. - -=========================================================== - _/ _/_/_/_/ - _/_/ _/_/ _/ - _/ _/_/ _/_/_/_/ Martin John Bartlett - _/ _/ _/ _/ (martin@nitram.demon.co.uk) -_/ _/_/_/_/ - _/ -_/ _/ - _/_/ -=========================================================== diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt deleted file mode 100644 index cc675f25eee4a889692e5dd97adc064d87844293..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/oss-parameters.txt +++ /dev/null @@ -1,51 +0,0 @@ - OSS Kernel Parameters - ~~~~~~~~~~~~~~~~~~~~~ - -See Documentation/admin-guide/kernel-parameters.rst for general information on -specifying module parameters. - -This document may not be entirely up to date and comprehensive. The command -"modinfo -p ${modulename}" shows a current list of all parameters of a loadable -module. Loadable modules, after being loaded into the running kernel, also -reveal their parameters in /sys/module/${modulename}/parameters/. Some of these -parameters may be changed at runtime by the command -"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". - - - ad1848= [HW,OSS] - Format: ,,,, - - aedsp16= [HW,OSS] Audio Excel DSP 16 - Format: ,,,,, - See also header of sound/oss/aedsp16.c. - - dmasound= [HW,OSS] Sound subsystem buffers - - mpu401= [HW,OSS] - Format: , - - opl3= [HW,OSS] - Format: - - pas2= [HW,OSS] Format: - ,,,,,,, - - pss= [HW,OSS] Personal Sound System (ECHO ESC614) - Format: - ,,,,, - - sscape= [HW,OSS] - Format: ,,,, - - trix= [HW,OSS] MediaTrix AudioTrix Pro - Format: - ,,,,,,,, - - uart401= [HW,OSS] - Format: , - - uart6850= [HW,OSS] - Format: , - - waveartist= [HW,OSS] - Format: ,,, diff --git a/Documentation/sound/oss/ultrasound b/Documentation/sound/oss/ultrasound deleted file mode 100644 index eed331c738a3a9873f449862ae2b8268cfbae304..0000000000000000000000000000000000000000 --- a/Documentation/sound/oss/ultrasound +++ /dev/null @@ -1,30 +0,0 @@ -modprobe sound -insmod ad1848 -insmod gus io=* irq=* dma=* ... - -This loads the driver for the Gravis Ultrasound family of sound cards. - -The gus module takes the following arguments - -io I/O address of the Ultrasound card (eg. io=0x220) -irq IRQ of the Sound Blaster card -dma DMA channel for the Sound Blaster -dma16 2nd DMA channel, only needed for full duplex operation -type 1 for PnP card -gus16 1 for using 16 bit sampling daughter board -no_wave_dma Set to disable DMA usage for wavetable (see note) -db16 ??? - - -no_wave_dma option - -This option defaults to a value of 0, which allows the Ultrasound wavetable -DSP to use DMA for playback and downloading samples. This is the same -as the old behaviour. If set to 1, no DMA is needed for downloading samples, -and allows owners of a GUS MAX to make use of simultaneous digital audio -(/dev/dsp), MIDI, and wavetable playback. - - -If you have problems in recording with GUS MAX, you could try to use -just one 8 bit DMA channel. Recording will not work with one DMA -channel if it's a 16 bit one. diff --git a/Documentation/switchtec.txt b/Documentation/switchtec.txt index a0a9c7b3d4d546cc79cdbc39c6555371a4843675..f788264921ffa21415169997225ff40a70469bd7 100644 --- a/Documentation/switchtec.txt +++ b/Documentation/switchtec.txt @@ -78,3 +78,15 @@ The following IOCTLs are also supported by the device: between PCI Function Framework number (used by the event system) and Switchtec Logic Port ID and Partition number (which is more user friendly). + + +Non-Transparent Bridge (NTB) Driver +=================================== + +An NTB driver is provided for the switchtec hardware in switchtec_ntb. +Currently, it only supports switches configured with exactly 2 +partitions. It also requires the following configuration settings: + +* Both partitions must be able to access each other's GAS spaces. + Thus, the bits in the GAS Access Vector under Management Settings + must be set to support this. diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 9baf66a9ef4e7e57f24388d3da3130da83503195..b920423f88cbcb19e04a7838359ef04dace8f431 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -58,6 +58,7 @@ Currently, these files are in /proc/sys/vm: - percpu_pagelist_fraction - stat_interval - stat_refresh +- numa_stat - swappiness - user_reserve_kbytes - vfs_cache_pressure @@ -157,6 +158,10 @@ Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any value lower than this limit will be ignored and the old configuration will be retained. +Note: the value of dirty_bytes also must be set greater than +dirty_background_bytes or the amount of memory corresponding to +dirty_background_ratio. + ============================================================== dirty_expire_centisecs @@ -176,6 +181,9 @@ generating disk writes will itself start writing out dirty data. The total available memory is not equal to total system memory. +Note: dirty_ratio must be set greater than dirty_background_ratio or +ratio corresponding to dirty_background_bytes. + ============================================================== dirty_writeback_centisecs @@ -622,7 +630,7 @@ oom_dump_tasks Enables a system-wide task dump (excluding kernel threads) to be produced when the kernel performs an OOM-killing and includes such information as -pid, uid, tgid, vm size, rss, nr_ptes, nr_pmds, swapents, oom_score_adj +pid, uid, tgid, vm size, rss, pgtables_bytes, swapents, oom_score_adj score, and name. This is helpful to determine why the OOM killer was invoked, to identify the rogue task that caused it, and to determine why the OOM killer chose the task it did to kill. @@ -792,10 +800,25 @@ with no ill effects: errors and warnings on these stats are suppressed.) ============================================================== +numa_stat + +This interface allows runtime configuration of numa statistics. + +When page allocation performance becomes a bottleneck and you can tolerate +some possible tool breakage and decreased numa counter precision, you can +do: + echo 0 > /proc/sys/vm/numa_stat + +When page allocation performance is not a bottleneck and you want all +tooling to work, you can do: + echo 1 > /proc/sys/vm/numa_stat + +============================================================== + swappiness This control is used to define how aggressive the kernel will swap -memory pages. Higher values will increase agressiveness, lower values +memory pages. Higher values will increase aggressiveness, lower values decrease the amount of swap. A value of 0 instructs the kernel not to initiate swap until the amount of free and file-backed pages is less than the high water mark in a zone. diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt index b3da1f90b8618ef95da6112a51cb62bc3c01590a..2b9b51cd501e68aff9d65d5a5de3d5514dc416a3 100644 --- a/Documentation/trace/coresight-cpu-debug.txt +++ b/Documentation/trace/coresight-cpu-debug.txt @@ -149,11 +149,23 @@ If you want to limit idle states at boot time, you can use "nohlt" or At the runtime you can disable idle states with below methods: -Set latency request to /dev/cpu_dma_latency to disable all CPUs specific idle -states (if latency = 0uS then disable all idle states): -# echo "what_ever_latency_you_need_in_uS" > /dev/cpu_dma_latency - -Disable specific CPU's specific idle state: +It is possible to disable CPU idle states by way of the PM QoS +subsystem, more specifically by using the "/dev/cpu_dma_latency" +interface (see Documentation/power/pm_qos_interface.txt for more +details). As specified in the PM QoS documentation the requested +parameter will stay in effect until the file descriptor is released. +For example: + +# exec 3<> /dev/cpu_dma_latency; echo 0 >&3 +... +Do some work... +... +# exec 3<>- + +The same can also be done from an application program. + +Disable specific CPU's specific idle state from cpuidle sysfs (see +Documentation/cpuidle/sysfs.txt): # echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/gpio.txt index bce9725210659de9a7c1d3c97cb9d8374dc0d581..4f8bf30a41dc59ea52b0a77d5816cb6b1716f105 100644 --- a/Documentation/translations/zh_CN/gpio.txt +++ b/Documentation/translations/zh_CN/gpio.txt @@ -257,9 +257,9 @@ GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其 简单地关闭未使用时钟)。 对于 GPIO 使用 pinctrl 子系统已知的引脚，子系统应该被告知其使用情况； -一个 gpiolib 驱动的 .request()操作应调用 pinctrl_request_gpio()， -而 gpiolib 驱动的 .free()操作应调用 pinctrl_free_gpio()。pinctrl -子系统允许 pinctrl_request_gpio()在某个引脚或引脚组以复用形式“属于” +一个 gpiolib 驱动的 .request()操作应调用 pinctrl_gpio_request()， +而 gpiolib 驱动的 .free()操作应调用 pinctrl_gpio_free()。pinctrl +子系统允许 pinctrl_gpio_request()在某个引脚或引脚组以复用形式“属于” 一个设备时都成功返回。 任何须将 GPIO 信号导向适当引脚的引脚复用硬件的编程应该发生在 GPIO diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index e63a35fafef0e153c30023e92622111006d1dd7c..f670e4b9e7f33fdbb186d9b1c9186c6a2fbf7324 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1124,10 +1124,14 @@ guest physical address space and must not conflict with any memory slot or any mmio address. The guest may malfunction if it accesses this memory region. +Setting the address to 0 will result in resetting the address to its default +(0xfffbc000). + This ioctl is required on Intel-based hosts. This is needed on Intel hardware because of a quirk in the virtualization implementation (see the internals documentation when it pops into existence). +Fails if any VCPU has already been created. 4.41 KVM_SET_BOOT_CPU_ID @@ -4347,3 +4351,12 @@ This capability indicates that userspace can load HV_X64_MSR_VP_INDEX msr. Its value is used to denote the target vcpu for a SynIC interrupt. For compatibilty, KVM initializes this msr to KVM's internal vcpu index. When this capability is absent, userspace can still query this msr's value. + +8.13 KVM_CAP_S390_AIS_MIGRATION + +Architectures: s390 +Parameters: none + +This capability indicates if the flic device will be able to get/set the +AIS states for migration via the KVM_DEV_FLIC_AISM_ALL attribute and allows +to discover this without having to create a flic device. diff --git a/Documentation/virtual/kvm/devices/arm-vgic-its.txt b/Documentation/virtual/kvm/devices/arm-vgic-its.txt index eb06beb759601f1fa7c96a12ebda6a774f7d877f..8d5830eab26a6ba03c310719eb2cc6b76e64fa5a 100644 --- a/Documentation/virtual/kvm/devices/arm-vgic-its.txt +++ b/Documentation/virtual/kvm/devices/arm-vgic-its.txt @@ -33,6 +33,10 @@ Groups: request the initialization of the ITS, no additional parameter in kvm_device_attr.addr. + KVM_DEV_ARM_ITS_CTRL_RESET + reset the ITS, no additional parameter in kvm_device_attr.addr. + See "ITS Reset State" section. + KVM_DEV_ARM_ITS_SAVE_TABLES save the ITS table data into guest RAM, at the location provisioned by the guest in corresponding registers/table entries. @@ -157,3 +161,19 @@ Then vcpus can be started. - pINTID is the physical LPI ID; if zero, it means the entry is not valid and other fields are not meaningful. - ICID is the collection ID + + ITS Reset State: + ---------------- + +RESET returns the ITS to the same state that it was when first created and +initialized. When the RESET command returns, the following things are +guaranteed: + +- The ITS is not enabled and quiescent + GITS_CTLR.Enabled = 0 .Quiescent=1 +- There is no internally cached state +- No collection or device table are used + GITS_BASER.Valid = 0 +- GITS_CBASER = 0, GITS_CREADR = 0, GITS_CWRITER = 0 +- The ABI version is unchanged and remains the one set when the ITS + device was first created. diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virtual/kvm/devices/s390_flic.txt index 2f1cbf1301d2291ba23d1073511cb0b2989d61f5..a4e20a09017468b2e5a97e7782ad74aab1431de5 100644 --- a/Documentation/virtual/kvm/devices/s390_flic.txt +++ b/Documentation/virtual/kvm/devices/s390_flic.txt @@ -151,8 +151,13 @@ struct kvm_s390_ais_all { to an ISC (MSB0 bit 0 to ISC 0 and so on). The combination of simm bit and nimm bit presents AIS mode for a ISC. + KVM_DEV_FLIC_AISM_ALL is indicated by KVM_CAP_S390_AIS_MIGRATION. + Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on FLIC with an unknown group or attribute gives the error code EINVAL (instead of ENXIO, as specified in the API documentation). It is not possible to conclude that a FLIC operation is unavailable based on the error code resulting from a usage attempt. + +Note: The KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl will return EINVAL in case a zero +schid is specified. diff --git a/Documentation/vm/mmu_notifier.txt b/Documentation/vm/mmu_notifier.txt new file mode 100644 index 0000000000000000000000000000000000000000..23b462566bb762787197b553e871647d72f1aecd --- /dev/null +++ b/Documentation/vm/mmu_notifier.txt @@ -0,0 +1,93 @@ +When do you need to notify inside page table lock ? + +When clearing a pte/pmd we are given a choice to notify the event through +(notify version of *_clear_flush call mmu_notifier_invalidate_range) under +the page table lock. But that notification is not necessary in all cases. + +For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when device use +thing like ATS/PASID to get the IOMMU to walk the CPU page table to access a +process virtual address space). There is only 2 cases when you need to notify +those secondary TLB while holding page table lock when clearing a pte/pmd: + + A) page backing address is free before mmu_notifier_invalidate_range_end() + B) a page table entry is updated to point to a new page (COW, write fault + on zero page, __replace_page(), ...) + +Case A is obvious you do not want to take the risk for the device to write to +a page that might now be used by some completely different task. + +Case B is more subtle. For correctness it requires the following sequence to +happen: + - take page table lock + - clear page table entry and notify ([pmd/pte]p_huge_clear_flush_notify()) + - set page table entry to point to new page + +If clearing the page table entry is not followed by a notify before setting +the new pte/pmd value then you can break memory model like C11 or C++11 for +the device. + +Consider the following scenario (device use a feature similar to ATS/PASID): + +Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we assume +they are write protected for COW (other case of B apply too). + +[Time N] -------------------------------------------------------------------- +CPU-thread-0 {try to write to addrA} +CPU-thread-1 {try to write to addrB} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {read addrA and populate device TLB} +DEV-thread-2 {read addrB and populate device TLB} +[Time N+1] ------------------------------------------------------------------ +CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} +CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+2] ------------------------------------------------------------------ +CPU-thread-0 {COW_step1: {update page table to point to new page for addrA}} +CPU-thread-1 {COW_step1: {update page table to point to new page for addrB}} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+3] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {preempted} +CPU-thread-2 {write to addrA which is a write to new page} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+3] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {preempted} +CPU-thread-2 {} +CPU-thread-3 {write to addrB which is a write to new page} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+4] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {} +DEV-thread-2 {} +[Time N+5] ------------------------------------------------------------------ +CPU-thread-0 {preempted} +CPU-thread-1 {} +CPU-thread-2 {} +CPU-thread-3 {} +DEV-thread-0 {read addrA from old page} +DEV-thread-2 {read addrB from new page} + +So here because at time N+2 the clear page table entry was not pair with a +notification to invalidate the secondary TLB, the device see the new value for +addrB before seing the new value for addrA. This break total memory ordering +for the device. + +When changing a pte to write protect or to point to a new write protected page +with same content (KSM) it is fine to delay the mmu_notifier_invalidate_range +call to mmu_notifier_invalidate_range_end() outside the page table lock. This +is true even if the thread doing the page table update is preempted right after +releasing page table lock but before call mmu_notifier_invalidate_range_end(). diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX index 8d76718e1ea26861cebb36a58f29aa023711ecf2..68946f83e579f580a0e7b5731f4b34b4eb26578e 100644 --- a/Documentation/w1/slaves/00-INDEX +++ b/Documentation/w1/slaves/00-INDEX @@ -10,3 +10,5 @@ w1_ds2438 - The Maxim/Dallas Semiconductor ds2438 smart battery monitor. w1_ds28e04 - The Maxim/Dallas Semiconductor ds28e04 eeprom. +w1_ds28e17 + - The Maxim/Dallas Semiconductor ds28e17 1-Wire-to-I2C Master Bridge. diff --git a/Documentation/w1/slaves/w1_ds28e17 b/Documentation/w1/slaves/w1_ds28e17 new file mode 100644 index 0000000000000000000000000000000000000000..7fcfad5b4a37280c1c8f997a271592ab72125af2 --- /dev/null +++ b/Documentation/w1/slaves/w1_ds28e17 @@ -0,0 +1,68 @@ +Kernel driver w1_ds28e17 +======================== + +Supported chips: + * Maxim DS28E17 1-Wire-to-I2C Master Bridge + +supported family codes: + W1_FAMILY_DS28E17 0x19 + +Author: Jan Kandziora + + +Description +----------- +The DS28E17 is a Onewire slave device which acts as an I2C bus master. + +This driver creates a new I2C bus for any DS28E17 device detected. I2C buses +come and go as the DS28E17 devices come and go. I2C slave devices connected to +a DS28E17 can be accessed by the kernel or userspace tools as if they were +connected to a "native" I2C bus master. + + +An udev rule like the following +------------------------------------------------------------------------------- +SUBSYSTEM=="i2c-dev", KERNEL=="i2c-[0-9]*", ATTRS{name}=="w1-19-*", \ + SYMLINK+="i2c-$attr{name}" +------------------------------------------------------------------------------- +may be used to create stable /dev/i2c- entries based on the unique id of the +DS28E17 chip. + + +Driver parameters are: + +speed: + This sets up the default I2C speed a DS28E17 get configured for as soon + it is connected. The power-on default of the DS28E17 is 400kBaud, but + chips may come and go on the Onewire bus without being de-powered and + as soon the "w1_ds28e17" driver notices a freshly connected, or + reconnected DS28E17 device on the Onewire bus, it will re-apply this + setting. + + Valid values are 100, 400, 900 [kBaud]. Any other value means to leave + alone the current DS28E17 setting on detect. The default value is 100. + +stretch: + This sets up the default stretch value used for freshly connected + DS28E17 devices. It is a multiplier used on the calculation of the busy + wait time for an I2C transfer. This is to account for I2C slave devices + which make heavy use of the I2C clock stretching feature and thus, the + needed timeout cannot be pre-calculated correctly. As the w1_ds28e17 + driver checks the DS28E17's busy flag in a loop after the precalculated + wait time, it should be hardly needed to tweak this setting. + + Leave it at 1 unless you get ETIMEDOUT errors and a "w1_slave_driver + 19-00000002dbd8: busy timeout" in the kernel log. + + Valid values are 1 to 9. The default is 1. + + +The driver creates sysfs files /sys/bus/w1/devices/19-/speed and +/sys/bus/w1/devices/19-/stretch for each device, preloaded with the default +settings from the driver parameters. They may be changed anytime. In addition a +directory /sys/bus/w1/devices/19-/i2c- for the I2C bus master sysfs +structure is created. + + +See https://github.com/ianka/w1_ds28e17 for even more information. + diff --git a/Kbuild b/Kbuild index af161aa1facd194baeb574e9d36a530274411702..00530420548225a8b26a36f504d9aa00468ddb42 100644 --- a/Kbuild +++ b/Kbuild @@ -18,7 +18,6 @@ targets := kernel/bounds.s # We use internal kbuild rules to avoid the "is up to date" message from make kernel/bounds.s: kernel/bounds.c FORCE - $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) $(obj)/$(bounds-file): kernel/bounds.s FORCE @@ -54,7 +53,6 @@ targets += arch/$(SRCARCH)/kernel/asm-offsets.s # We use internal kbuild rules to avoid the "is up to date" message from make arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \ $(obj)/$(timeconst-file) $(obj)/$(bounds-file) FORCE - $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) $(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE diff --git a/MAINTAINERS b/MAINTAINERS index 347f2a7e6c3898f608dca51e3b400fc856892693..44512c346206708bfc9b90e14e8e733a8aa81018 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -384,6 +384,7 @@ ACPI WMI DRIVER L: platform-driver-x86@vger.kernel.org S: Orphan F: drivers/platform/x86/wmi.c +F: include/uapi/linux/wmi.h AD1889 ALSA SOUND DRIVER M: Thibaut Varene @@ -527,11 +528,6 @@ W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/input/misc/adxl34x.c -AEDSP16 DRIVER -M: Riccardo Facchetti -S: Maintained -F: sound/oss/aedsp16.c - AF9013 MEDIA DRIVER M: Antti Palosaari L: linux-media@vger.kernel.org @@ -700,9 +696,9 @@ F: include/linux/altera_uart.h F: include/linux/altera_jtaguart.h AMAZON ETHERNET DRIVERS -M: Netanel Belgazal -R: Saeed Bishara -R: Zorik Machulsky +M: Netanel Belgazal +R: Saeed Bishara +R: Zorik Machulsky L: netdev@vger.kernel.org S: Supported F: Documentation/networking/ena.txt @@ -759,8 +755,6 @@ F: drivers/gpu/drm/amd/amdkfd/ F: drivers/gpu/drm/amd/include/cik_structs.h F: drivers/gpu/drm/amd/include/kgd_kfd_interface.h F: drivers/gpu/drm/amd/include/vi_structs.h -F: drivers/gpu/drm/radeon/radeon_kfd.c -F: drivers/gpu/drm/radeon/radeon_kfd.h F: include/uapi/linux/kfd_ioctl.h AMD SEATTLE DEVICE TREE SUPPORT @@ -1226,6 +1220,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.linux4sam.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git S: Supported +N: at91 +N: atmel F: arch/arm/mach-at91/ F: include/soc/at91/ F: arch/arm/boot/dts/at91*.dts @@ -1234,6 +1230,9 @@ F: arch/arm/boot/dts/sama*.dts F: arch/arm/boot/dts/sama*.dtsi F: arch/arm/include/debug/at91.S F: drivers/memory/atmel* +F: drivers/watchdog/sama5d4_wdt.c +X: drivers/input/touchscreen/atmel_mxt_ts.c +X: drivers/net/wireless/atmel/ ARM/CALXEDA HIGHBANK ARCHITECTURE M: Rob Herring @@ -1768,6 +1767,7 @@ Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next S: Supported F: arch/arm64/boot/dts/renesas/ +F: Documentation/devicetree/bindings/arm/shmobile.txt F: drivers/soc/renesas/ F: include/linux/soc/renesas/ @@ -1887,6 +1887,7 @@ F: arch/arm/boot/dts/sh* F: arch/arm/configs/shmobile_defconfig F: arch/arm/include/debug/renesas-scif.S F: arch/arm/mach-shmobile/ +F: Documentation/devicetree/bindings/arm/shmobile.txt F: drivers/soc/renesas/ F: include/linux/soc/renesas/ @@ -1961,6 +1962,14 @@ M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/TEGRA HDMI CEC SUBSYSTEM SUPPORT +M: Hans Verkuil +L: linux-tegra@vger.kernel.org +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/platform/tegra-cec/ +F: Documentation/devicetree/bindings/media/tegra-cec.txt + ARM/TETON BGA MACHINE SUPPORT M: "Mark F. Brown" L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2029,6 +2038,7 @@ M: Masahiro Yamada L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git S: Maintained +F: Documentation/devicetree/bindings/gpio/gpio-uniphier.txt F: arch/arm/boot/dts/uniphier* F: arch/arm/include/asm/hardware/cache-uniphier.h F: arch/arm/mach-uniphier/ @@ -2036,6 +2046,7 @@ F: arch/arm/mm/cache-uniphier.c F: arch/arm64/boot/dts/socionext/ F: drivers/bus/uniphier-system-bus.c F: drivers/clk/uniphier/ +F: drivers/gpio/gpio-uniphier.c F: drivers/i2c/busses/i2c-uniphier* F: drivers/irqchip/irq-uniphier-aidet.c F: drivers/pinctrl/uniphier/ @@ -2136,7 +2147,6 @@ F: drivers/gpio/gpio-zx.c F: drivers/i2c/busses/i2c-zx2967.c F: drivers/mmc/host/dw_mmc-zx.* F: drivers/pinctrl/zte/ -F: drivers/reset/reset-zx2967.c F: drivers/soc/zte/ F: drivers/thermal/zx2967_thermal.c F: drivers/watchdog/zx2967_wdt.c @@ -2159,7 +2169,6 @@ F: sound/soc/zte/ ARM/ZYNQ ARCHITECTURE M: Michal Simek -R: Sören Brinkmann L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://wiki.xilinx.com T: git https://github.com/Xilinx/linux-xlnx.git @@ -2247,7 +2256,7 @@ F: include/linux/dmaengine.h F: include/linux/async_tx.h AT24 EEPROM DRIVER -M: Wolfram Sang +M: Bartosz Golaszewski L: linux-i2c@vger.kernel.org S: Maintained F: drivers/misc/eeprom/at24.c @@ -2562,10 +2571,12 @@ S: Maintained F: drivers/net/hamradio/baycom* BCACHE (BLOCK LAYER CACHE) +M: Michael Lyle M: Kent Overstreet L: linux-bcache@vger.kernel.org W: http://bcache.evilpiepirate.org -S: Orphan +C: irc://irc.oftc.net/bcache +S: Maintained F: drivers/md/bcache/ BDISP ST MEDIA DRIVER @@ -2713,6 +2724,7 @@ L: linux-kernel@vger.kernel.org S: Supported F: arch/x86/net/bpf_jit* F: Documentation/networking/filter.txt +F: Documentation/bpf/ F: include/linux/bpf* F: include/linux/filter.h F: include/uapi/linux/bpf* @@ -2725,7 +2737,7 @@ F: net/core/filter.c F: net/sched/act_bpf.c F: net/sched/cls_bpf.c F: samples/bpf/ -F: tools/net/bpf* +F: tools/bpf/ F: tools/testing/selftests/bpf/ BROADCOM B44 10/100 ETHERNET DRIVER @@ -2896,7 +2908,15 @@ S: Supported F: drivers/gpio/gpio-brcmstb.c F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt +BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER +M: Al Cooper +L: linux-kernel@vger.kernel.org +L: bcm-kernel-feedback-list@broadcom.com +S: Maintained +F: drivers/phy/broadcom/phy-brcm-usb* + BROADCOM GENET ETHERNET DRIVER +M: Doug Berger M: Florian Fainelli L: netdev@vger.kernel.org S: Supported @@ -2923,6 +2943,7 @@ N: bcm583* N: bcm585* N: bcm586* N: bcm88312 +N: hr2 F: arch/arm64/boot/dts/broadcom/ns2* F: drivers/clk/bcm/clk-ns* F: drivers/pinctrl/bcm/pinctrl-ns* @@ -2966,6 +2987,14 @@ S: Maintained F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt F: drivers/cpufreq/brcmstb* +BROADCOM STB AVS TMON DRIVER +M: Markus Mayer +M: bcm-kernel-feedback-list@broadcom.com +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt +F: drivers/thermal/broadcom/brcmstb* + BROADCOM STB NAND FLASH DRIVER M: Brian Norris M: Kamal Dasu @@ -2974,6 +3003,14 @@ L: bcm-kernel-feedback-list@broadcom.com S: Maintained F: drivers/mtd/nand/brcmnand/ +BROADCOM STB DPFE DRIVER +M: Markus Mayer +M: bcm-kernel-feedback-list@broadcom.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt +F: drivers/memory/brcmstb_dpfe.c + BROADCOM SYSTEMPORT ETHERNET DRIVER M: Florian Fainelli L: netdev@vger.kernel.org @@ -3082,7 +3119,6 @@ F: arch/c6x/ CA8210 IEEE-802.15.4 RADIO DRIVER M: Harry Morris -M: linuxdev@cascoda.com L: linux-wpan@vger.kernel.org W: https://github.com/Cascoda/ca8210-linux.git S: Maintained @@ -3257,6 +3293,15 @@ F: include/uapi/linux/cec.h F: include/uapi/linux/cec-funcs.h F: Documentation/devicetree/bindings/media/cec.txt +CEC GPIO DRIVER +M: Hans Verkuil +L: linux-media@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +W: http://linuxtv.org +S: Supported +F: drivers/media/platform/cec-gpio/ +F: Documentation/devicetree/bindings/media/cec-gpio.txt + CELL BROADBAND ENGINE ARCHITECTURE M: Arnd Bergmann L: linuxppc-dev@lists.ozlabs.org @@ -3329,17 +3374,22 @@ S: Maintained F: drivers/auxdisplay/cfag12864bfb.c F: include/linux/cfag12864b.h -CFG80211 and NL80211 +802.11 (including CFG80211/NL80211) M: Johannes Berg L: linux-wireless@vger.kernel.org W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained +F: net/wireless/ F: include/uapi/linux/nl80211.h +F: include/linux/ieee80211.h +F: include/net/wext.h F: include/net/cfg80211.h -F: net/wireless/* -X: net/wireless/wext* +F: include/net/iw_handler.h +F: include/net/ieee80211_radiotap.h +F: Documentation/driver-api/80211/cfg80211.rst +F: Documentation/networking/regulatory.txt CHAR and MISC DRIVERS M: Arnd Bergmann @@ -3415,7 +3465,7 @@ F: drivers/scsi/snic/ CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti M: Govindarajulu Varadarajan <_govind@gmx.com> -M: Neel Patel +M: Parvi Kaustubhi S: Supported F: drivers/net/ethernet/cisco/enic/ @@ -3466,7 +3516,7 @@ COCCINELLE/Semantic Patches (SmPL) M: Julia Lawall M: Gilles Muller M: Nicolas Palix -M: Michal Marek +M: Michal Marek L: cocci@systeme.lip6.fr (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc W: http://coccinelle.lip6.fr/ @@ -3580,7 +3630,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git S: Maintained F: Documentation/cgroup-v1/cpusets.txt F: include/linux/cpuset.h -F: kernel/cpuset.c +F: kernel/cgroup/cpuset.c CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG) M: Johannes Weiner @@ -3637,6 +3687,8 @@ F: drivers/cpufreq/arm_big_little_dt.c CPU POWER MONITORING SUBSYSTEM M: Thomas Renninger +M: Shuah Khan +M: Shuah Khan L: linux-pm@vger.kernel.org S: Maintained F: tools/power/cpupower/ @@ -3677,8 +3729,8 @@ F: drivers/cpuidle/* F: include/linux/cpuidle.h CRAMFS FILESYSTEM -W: http://sourceforge.net/projects/cramfs/ -S: Orphan / Obsolete +M: Nicolas Pitre +S: Maintained F: Documentation/filesystems/cramfs.txt F: fs/cramfs/ @@ -3979,6 +4031,26 @@ M: "Maciej W. Rozycki" S: Maintained F: drivers/net/fddi/defxx.* +DELL SMBIOS DRIVER +M: Pali Rohár +M: Mario Limonciello +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/dell-smbios.* + +DELL SMBIOS SMM DRIVER +M: Mario Limonciello +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/dell-smbios-smm.c + +DELL SMBIOS WMI DRIVER +M: Mario Limonciello +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/dell-smbios-wmi.c +F: tools/wmi/dell-smbios-example.c + DELL LAPTOP DRIVER M: Matthew Garrett M: Pali Rohár @@ -4008,12 +4080,17 @@ S: Maintained F: Documentation/dcdbas.txt F: drivers/firmware/dcdbas.* -DELL WMI EXTRAS DRIVER +DELL WMI NOTIFICATIONS DRIVER M: Matthew Garrett M: Pali Rohár S: Maintained F: drivers/platform/x86/dell-wmi.c +DELL WMI DESCRIPTOR DRIVER +M: Mario Limonciello +S: Maintained +F: drivers/platform/x86/dell-wmi-descriptor.c + DELTA ST MEDIA DRIVER M: Hugues Fruchet L: linux-media@vger.kernel.org @@ -4092,6 +4169,8 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm.git T: quilt http://people.redhat.com/agk/patches/linux/editing/ S: Maintained F: Documentation/device-mapper/ +F: drivers/md/Makefile +F: drivers/md/Kconfig F: drivers/md/dm* F: drivers/md/persistent-data/ F: include/linux/device-mapper.h @@ -4115,7 +4194,7 @@ F: Documentation/devicetree/bindings/mfd/da90*.txt F: Documentation/devicetree/bindings/input/da90??-onkey.txt F: Documentation/devicetree/bindings/thermal/da90??-thermal.txt F: Documentation/devicetree/bindings/regulator/da92*.txt -F: Documentation/devicetree/bindings/watchdog/da92??-wdt.txt +F: Documentation/devicetree/bindings/watchdog/da90??-wdt.txt F: Documentation/devicetree/bindings/sound/da[79]*.txt F: drivers/gpio/gpio-da90??.c F: drivers/hwmon/da90??-hwmon.c @@ -4163,7 +4242,7 @@ L: linux-i2c@vger.kernel.org S: Maintained F: drivers/i2c/busses/i2c-diolan-u2c.c -DIRECT ACCESS (DAX) +FILESYSTEM DIRECT ACCESS (DAX) M: Matthew Wilcox M: Ross Zwisler L: linux-fsdevel@vger.kernel.org @@ -4172,6 +4251,12 @@ F: fs/dax.c F: include/linux/dax.h F: include/trace/events/fs_dax.h +DEVICE DIRECT ACCESS (DAX) +M: Dan Williams +L: linux-nvdimm@lists.01.org +S: Supported +F: drivers/dax/ + DIRECTORY NOTIFICATION (DNOTIFY) M: Jan Kara R: Amir Goldstein @@ -4367,6 +4452,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/bochs/ +DRM DRIVER FOR FARADAY TVE200 TV ENCODER +M: Linus Walleij +T: git git://anongit.freedesktop.org/drm/drm-misc +S: Maintained +F: drivers/gpu/drm/tve200/ + DRM DRIVER FOR INTEL I810 VIDEO CARDS S: Orphan / Obsolete F: drivers/gpu/drm/i810/ @@ -4510,7 +4601,7 @@ L: dri-devel@lists.freedesktop.org S: Supported F: drivers/gpu/drm/sun4i/ F: Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git +T: git git://anongit.freedesktop.org/drm/drm-misc DRM DRIVERS FOR AMLOGIC SOCS M: Neil Armstrong @@ -4694,7 +4785,7 @@ T: git git://anongit.freedesktop.org/drm/drm-misc DRM PANEL DRIVERS M: Thierry Reding L: dri-devel@lists.freedesktop.org -T: git git://anongit.freedesktop.org/tegra/linux.git +T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/drm_panel.c F: drivers/gpu/drm/panel/ @@ -5159,7 +5250,7 @@ F: drivers/video/fbdev/s1d13xxxfb.c F: include/video/s1d13xxxfb.h ERRSEQ ERROR TRACKING INFRASTRUCTURE -M: Jeff Layton +M: Jeff Layton S: Maintained F: lib/errseq.c F: include/linux/errseq.h @@ -5347,7 +5438,7 @@ F: include/scsi/libfcoe.h F: include/uapi/scsi/fc/ FILE LOCKING (flock() and fcntl()/lockf()) -M: Jeff Layton +M: Jeff Layton M: "J. Bruce Fields" L: linux-fsdevel@vger.kernel.org S: Maintained @@ -5437,7 +5528,7 @@ K: fmc_d.*register FPGA MANAGER FRAMEWORK M: Alan Tull -R: Moritz Fischer +M: Moritz Fischer L: linux-fpga@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git @@ -5462,6 +5553,7 @@ F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER M: Bartlomiej Zolnierkiewicz +L: dri-devel@lists.freedesktop.org L: linux-fbdev@vger.kernel.org T: git git://github.com/bzolnier/linux.git Q: http://patchwork.kernel.org/project/linux-fbdev/list/ @@ -5475,7 +5567,7 @@ F: include/uapi/linux/fb.h FREESCALE CAAM (Cryptographic Acceleration and Assurance Module) DRIVER M: Horia Geantă -M: Dan Douglass +M: Aymen Sghaier L: linux-crypto@vger.kernel.org S: Maintained F: drivers/crypto/caam/ @@ -5655,6 +5747,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt.git S: Supported F: fs/crypto/ F: include/linux/fscrypt*.h +F: Documentation/filesystems/fscrypt.rst FUJITSU FR-V (FRV) PORT S: Orphan @@ -6248,6 +6341,13 @@ S: Maintained F: drivers/net/ethernet/hisilicon/ F: Documentation/devicetree/bindings/net/hisilicon*.txt +HISILICON PMU DRIVER +M: Shaokun Zhang +W: http://www.hisilicon.com +S: Supported +F: drivers/perf/hisilicon +F: Documentation/perf/hisi-pmu.txt + HISILICON ROCE DRIVER M: Lijun Ou M: Wei Hu(Xavier) @@ -6781,8 +6881,7 @@ F: drivers/ipack/ INFINIBAND SUBSYSTEM M: Doug Ledford -M: Sean Hefty -M: Hal Rosenstock +M: Jason Gunthorpe L: linux-rdma@vger.kernel.org W: http://www.openfabrics.org/ Q: http://patchwork.kernel.org/project/linux-rdma/list/ @@ -7108,6 +7207,11 @@ F: Documentation/wimax/README.i2400m F: drivers/net/wimax/i2400m/ F: include/uapi/linux/wimax/i2400m.h +INTEL WMI THUNDERBOLT FORCE POWER DRIVER +M: Mario Limonciello +S: Maintained +F: drivers/platform/x86/intel-wmi-thunderbolt.c + INTEL(R) TRACE HUB M: Alexander Shishkin S: Supported @@ -7369,7 +7473,7 @@ JFS FILESYSTEM M: Dave Kleikamp L: jfs-discussion@lists.sourceforge.net W: http://jfs.sourceforge.net/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git +T: git git://github.com/kleikamp/linux-shaggy.git S: Maintained F: Documentation/filesystems/jfs.txt F: fs/jfs/ @@ -7437,10 +7541,8 @@ F: mm/kasan/ F: scripts/Makefile.kasan KCONFIG -M: "Yann E. MORIN" L: linux-kbuild@vger.kernel.org -T: git git://gitorious.org/linux-kconfig/linux-kconfig -S: Maintained +S: Orphan F: Documentation/kbuild/kconfig-language.txt F: scripts/kconfig/ @@ -7469,7 +7571,7 @@ F: fs/autofs4/ KERNEL BUILD + files below scripts/ (unless maintained elsewhere) M: Masahiro Yamada -M: Michal Marek +M: Michal Marek T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git L: linux-kbuild@vger.kernel.org S: Maintained @@ -7487,7 +7589,7 @@ S: Odd Fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS M: "J. Bruce Fields" -M: Jeff Layton +M: Jeff Layton L: linux-nfs@vger.kernel.org W: http://nfs.sourceforge.net/ T: git git://linux-nfs.org/~bfields/linux.git @@ -7608,6 +7710,7 @@ S: Supported F: arch/x86/kvm/ F: arch/x86/include/uapi/asm/kvm* F: arch/x86/include/asm/kvm* +F: arch/x86/include/asm/pvclock-abi.h F: arch/x86/kernel/kvm.c F: arch/x86/kernel/kvmclock.c @@ -7672,16 +7775,6 @@ F: include/linux/kdb.h F: include/linux/kgdb.h F: kernel/debug/ -KMEMCHECK -M: Vegard Nossum -M: Pekka Enberg -S: Maintained -F: Documentation/dev-tools/kmemcheck.rst -F: arch/x86/include/asm/kmemcheck.h -F: arch/x86/mm/kmemcheck/ -F: include/linux/kmemcheck.h -F: mm/kmemcheck.c - KMEMLEAK M: Catalin Marinas S: Maintained @@ -8215,6 +8308,7 @@ F: Documentation/networking/mac80211-injection.txt F: include/net/mac80211.h F: net/mac80211/ F: drivers/net/wireless/mac80211_hwsim.[ch] +F: Documentation/networking/mac80211_hwsim/README MAILBOX API M: Jassi Brar @@ -9206,12 +9300,6 @@ F: include/linux/dt-bindings/mux/ F: include/linux/mux/ F: drivers/mux/ -MULTISOUND SOUND DRIVER -M: Andrew Veliath -S: Maintained -F: Documentation/sound/oss/MultiSound -F: sound/oss/msnd* - MULTITECH MULTIPORT CARD (ISICOM) S: Orphan F: drivers/tty/isicom.c @@ -9415,6 +9503,7 @@ M: Florian Fainelli S: Maintained F: net/dsa/ F: include/net/dsa.h +F: include/linux/dsa/ F: drivers/net/dsa/ NETWORKING [GENERAL] @@ -9435,8 +9524,8 @@ F: include/uapi/linux/in.h F: include/uapi/linux/net.h F: include/uapi/linux/netdevice.h F: include/uapi/linux/net_namespace.h -F: tools/net/ F: tools/testing/selftests/net/ +F: lib/net_utils.c F: lib/random32.c NETWORKING [IPSEC] @@ -9637,12 +9726,11 @@ S: Supported F: drivers/ntb/hw/idt/ NTB INTEL DRIVER -M: Jon Mason M: Dave Jiang L: linux-ntb@googlegroups.com S: Supported -W: https://github.com/jonmason/ntb/wiki -T: git git://github.com/jonmason/ntb.git +W: https://github.com/davejiang/linux/wiki +T: git https://github.com/davejiang/linux.git F: drivers/ntb/hw/intel/ NTFS FILESYSTEM @@ -10060,7 +10148,7 @@ M: Stephen Boyd L: linux-pm@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git -F: drivers/base/power/opp/ +F: drivers/opp/ F: include/linux/pm_opp.h F: Documentation/power/opp.txt F: Documentation/devicetree/bindings/opp/ @@ -10354,6 +10442,8 @@ F: Documentation/switchtec.txt F: Documentation/ABI/testing/sysfs-class-switchtec F: drivers/pci/switch/switchtec* F: include/uapi/linux/switchtec_ioctl.h +F: include/linux/switchtec.h +F: drivers/ntb/hw/mscc/ PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support) M: Thomas Petazzoni @@ -10504,6 +10594,14 @@ S: Maintained F: Documentation/devicetree/bindings/pci/pcie-kirin.txt F: drivers/pci/dwc/pcie-kirin.c +PCIE DRIVER FOR HISILICON STB +M: Jianguo Sun +M: Shawn Guo +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt +F: drivers/pci/dwc/pcie-histb.c + PCIE DRIVER FOR MEDIATEK M: Ryder Lee L: linux-pci@vger.kernel.org @@ -10527,6 +10625,13 @@ S: Maintained F: Documentation/devicetree/bindings/pci/rockchip-pcie.txt F: drivers/pci/host/pcie-rockchip.c +PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC +M: Linus Walleij +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +F: drivers/pci/host/pci-v3-semi.c + PCIE DRIVER FOR ST SPEAR13XX M: Pratyush Anand L: linux-pci@vger.kernel.org @@ -10557,6 +10662,12 @@ S: Maintained F: crypto/pcrypt.c F: include/crypto/pcrypt.h +PEAQ WMI HOTKEYS DRIVER +M: Hans de Goede +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/peaq-wmi.c + PER-CPU MEMORY ALLOCATOR M: Tejun Heo M: Christoph Lameter @@ -10670,6 +10781,7 @@ PIN CONTROLLER - RENESAS M: Laurent Pinchart M: Geert Uytterhoeven L: linux-renesas-soc@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git sh-pfc S: Maintained F: drivers/pinctrl/sh-pfc/ @@ -11051,7 +11163,6 @@ F: drivers/mtd/nand/pxa3xx_nand.c QAT DRIVER M: Giovanni Cabiddu -M: Salvatore Benedetto L: qat-linux@intel.com S: Supported F: drivers/crypto/qat/ @@ -11099,6 +11210,7 @@ F: drivers/net/ethernet/qlogic/qede/ QLOGIC QL4xxx RDMA DRIVER M: Ram Amrani +M: Michal Kalderon M: Ariel Elior L: linux-rdma@vger.kernel.org S: Supported @@ -11469,6 +11581,7 @@ F: include/linux/rpmsg/ RENESAS CLOCK DRIVERS M: Geert Uytterhoeven L: linux-renesas-soc@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git clk-renesas S: Supported F: drivers/clk/renesas/ @@ -11511,6 +11624,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained F: Documentation/rfkill.txt +F: Documentation/ABI/stable/sysfs-class-rfkill F: net/rfkill/ RHASHTABLE @@ -11532,6 +11646,16 @@ S: Maintained F: drivers/mtd/nand/r852.c F: drivers/mtd/nand/r852.h +RISC-V ARCHITECTURE +M: Palmer Dabbelt +M: Albert Ou +L: patches@groups.riscv.org +T: git https://github.com/riscv/riscv-linux +S: Supported +F: arch/riscv/ +K: riscv +N: riscv + ROCCAT DRIVERS M: Stefan Achatz W: http://sourceforge.net/projects/roccat/ @@ -11540,6 +11664,13 @@ F: drivers/hid/hid-roccat* F: include/linux/hid-roccat* F: Documentation/ABI/*/sysfs-driver-hid-roccat* +ROCKCHIP RASTER 2D GRAPHIC ACCELERATION UNIT DRIVER +M: Jacob chen +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/platform/rockchip/rga/ +F: Documentation/devicetree/bindings/media/rockchip-rga.txt + ROCKER DRIVER M: Jiri Pirko L: netdev@vger.kernel.org @@ -11784,7 +11915,7 @@ L: linux-crypto@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Maintained F: drivers/crypto/exynos-rng.c -F: Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt +F: Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt SAMSUNG FRAMEBUFFER DRIVER M: Jingoo Han @@ -12076,7 +12207,6 @@ F: drivers/mmc/host/sdhci-omap.c SECURE ENCRYPTING DEVICE (SED) OPAL DRIVER M: Scott Bauer M: Jonathan Derrick -M: Rafael Antognolli L: linux-block@vger.kernel.org S: Supported F: block/sed* @@ -12477,7 +12607,10 @@ M: Shaohua Li L: linux-raid@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/shli/md.git S: Supported -F: drivers/md/ +F: drivers/md/Makefile +F: drivers/md/Kconfig +F: drivers/md/md* +F: drivers/md/raid* F: include/linux/raid/ F: include/uapi/linux/raid/ @@ -12687,6 +12820,13 @@ L: stable@vger.kernel.org S: Supported F: Documentation/process/stable-kernel-rules.rst +STAGING - ATOMISP DRIVER +M: Alan Cox +M: Sakari Ailus +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/staging/media/atomisp/ + STAGING - COMEDI M: Ian Abbott M: H Hartley Sweeten @@ -12930,9 +13070,22 @@ F: arch/arc/plat-axs10x F: arch/arc/boot/dts/ax* F: Documentation/devicetree/bindings/arc/axs10* +SYNOPSYS AXS10x RESET CONTROLLER DRIVER +M: Eugeniy Paltsev +S: Supported +F: drivers/reset/reset-axs10x.c +F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt + +SYNOPSYS DESIGNWARE APB GPIO DRIVER +M: Hoan Tran +L: linux-gpio@vger.kernel.org +S: Maintained +F: drivers/gpio/gpio-dwapb.c +F: Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt + SYNOPSYS DESIGNWARE DMAC DRIVER M: Viresh Kumar -M: Andy Shevchenko +R: Andy Shevchenko S: Maintained F: include/linux/dma/dw.h F: include/linux/platform_data/dma-dw.h @@ -13313,8 +13466,18 @@ M: Andreas Noever M: Michael Jamet M: Mika Westerberg M: Yehezkel Bernat +T: git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git S: Maintained F: drivers/thunderbolt/ +F: include/linux/thunderbolt.h + +THUNDERBOLT NETWORK DRIVER +M: Michael Jamet +M: Mika Westerberg +M: Yehezkel Bernat +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/thunderbolt.c THUNDERX GPIO DRIVER M: David Daney @@ -13771,7 +13934,7 @@ UDRAW TABLET M: Bastien Nocera L: linux-input@vger.kernel.org S: Maintained -F: drivers/hid/hid-udraw.c +F: drivers/hid/hid-udraw-ps3.c UFS FILESYSTEM M: Evgeniy Dushistov @@ -14294,12 +14457,15 @@ S: Maintained F: include/linux/virtio_vsock.h F: include/uapi/linux/virtio_vsock.h F: include/uapi/linux/vsockmon.h +F: include/uapi/linux/vm_sockets_diag.h +F: net/vmw_vsock/diag.c F: net/vmw_vsock/af_vsock_tap.c F: net/vmw_vsock/virtio_transport_common.c F: net/vmw_vsock/virtio_transport.c F: drivers/net/vsockmon.c F: drivers/vhost/vsock.c F: drivers/vhost/vsock.h +F: tools/testing/vsock/ VIRTIO CONSOLE DRIVER M: Amit Shah @@ -14396,7 +14562,7 @@ M: Manohar Vanga M: Greg Kroah-Hartman L: devel@driverdev.osuosl.org S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git F: Documentation/driver-api/vme.rst F: drivers/staging/vme/ F: drivers/vme/ @@ -14563,7 +14729,6 @@ L: wil6210@qca.qualcomm.com S: Supported W: http://wireless.kernel.org/en/users/Drivers/wil6210 F: drivers/net/wireless/ath/wil6210/ -F: include/uapi/linux/wil6210_uapi.h WIMAX STACK M: Inaky Perez-Gonzalez @@ -14614,6 +14779,7 @@ F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt F: Documentation/devicetree/bindings/mfd/arizona.txt F: Documentation/devicetree/bindings/mfd/wm831x.txt +F: Documentation/devicetree/bindings/sound/wlf,arizona.txt F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c F: drivers/extcon/extcon-arizona.c @@ -14747,6 +14913,7 @@ F: arch/x86/xen/ F: drivers/*/xen-*front.c F: drivers/xen/ F: arch/x86/include/asm/xen/ +F: arch/x86/include/asm/pvclock-abi.h F: include/xen/ F: include/uapi/xen/ F: Documentation/ABI/stable/sysfs-hypervisor-xen diff --git a/Makefile b/Makefile index 7917d4a1d8d2383caeb71eb2cc0f45cbc8dacc33..efb942ad0b556c9fc3eb4636f39a351425a8cedc 100644 --- a/Makefile +++ b/Makefile @@ -11,6 +11,10 @@ NAME = Fearless Coyote # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. +# That's our default target when none is given on the command line +PHONY := _all +_all: + # o Do not use make's built-in rules and variables # (this increases performance and avoids hard-to-debug behaviour); # o Look for make include files relative to root of kernel src @@ -117,10 +121,6 @@ ifeq ("$(origin O)", "command line") KBUILD_OUTPUT := $(O) endif -# That's our default target when none is given on the command line -PHONY := _all -_all: - # Cancel implicit rules on top Makefile $(CURDIR)/Makefile Makefile: ; @@ -187,15 +187,6 @@ ifeq ("$(origin M)", "command line") KBUILD_EXTMOD := $(M) endif -# If building an external module we do not care about the all: rule -# but instead _all depend on modules -PHONY += all -ifeq ($(KBUILD_EXTMOD),) -_all: all -else -_all: modules -endif - ifeq ($(KBUILD_SRC),) # building in the source tree srctree := . @@ -207,6 +198,9 @@ else srctree := $(KBUILD_SRC) endif endif + +export KBUILD_CHECKSRC KBUILD_EXTMOD KBUILD_SRC + objtree := . src := $(srctree) obj := $(objtree) @@ -215,6 +209,74 @@ VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) export srctree objtree VPATH +# To make sure we do not include .config for any of the *config targets +# catch them early, and hand them over to scripts/kconfig/Makefile +# It is allowed to specify more targets when calling make, including +# mixing *config targets and build targets. +# For example 'make oldconfig all'. +# Detect when mixed targets is specified, and make a second invocation +# of make so .config is not included in this case either (for *config). + +version_h := include/generated/uapi/linux/version.h +old_version_h := include/linux/version.h + +no-dot-config-targets := clean mrproper distclean \ + cscope gtags TAGS tags help% %docs check% coccicheck \ + $(version_h) headers_% archheaders archscripts \ + kernelversion %src-pkg + +config-targets := 0 +mixed-targets := 0 +dot-config := 1 + +ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) + ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) + dot-config := 0 + endif +endif + +ifeq ($(KBUILD_EXTMOD),) + ifneq ($(filter config %config,$(MAKECMDGOALS)),) + config-targets := 1 + ifneq ($(words $(MAKECMDGOALS)),1) + mixed-targets := 1 + endif + endif +endif +# install and modules_install need also be processed one by one +ifneq ($(filter install,$(MAKECMDGOALS)),) + ifneq ($(filter modules_install,$(MAKECMDGOALS)),) + mixed-targets := 1 + endif +endif + +ifeq ($(mixed-targets),1) +# =========================================================================== +# We're called with mixed targets (*config and build targets). +# Handle them one by one. + +PHONY += $(MAKECMDGOALS) __build_one_by_one + +$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one + @: + +__build_one_by_one: + $(Q)set -e; \ + for i in $(MAKECMDGOALS); do \ + $(MAKE) -f $(srctree)/Makefile $$i; \ + done + +else + +# We need some generic definitions (do not try to remake the file). +scripts/Kbuild.include: ; +include scripts/Kbuild.include + +# Read KERNELRELEASE from include/config/kernel.release (if it exists) +KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) +KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) +export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION + # SUBARCH tells the usermode build what the underlying arch is. That is set # first, and if a usermode build is happening, the "ARCH=um" on the command # line overrides the setting of ARCH below. If a native build is happening, @@ -226,7 +288,8 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \ + -e s/riscv.*/riscv/) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- @@ -284,9 +347,6 @@ ifeq ($(ARCH),tilegx) SRCARCH := tile endif -# Where to locate arch specific headers -hdr-arch := $(SRCARCH) - KCONFIG_CONFIG ?= .config export KCONFIG_CONFIG @@ -307,45 +367,6 @@ HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) HOST_LOADLIBES := $(HOST_LFS_LIBS) -ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1) -HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \ - -Wno-missing-field-initializers -fno-delete-null-pointer-checks -endif - -# Decide whether to build built-in, modular, or both. -# Normally, just do built-in. - -KBUILD_MODULES := -KBUILD_BUILTIN := 1 - -# If we have only "make modules", don't compile built-in objects. -# When we're building modules with modversions, we need to consider -# the built-in objects during the descend as well, in order to -# make sure the checksums are up to date before we record them. - -ifeq ($(MAKECMDGOALS),modules) - KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) -endif - -# If we have "make modules", compile modules -# in addition to whatever we do anyway. -# Just "make" or "make all" shall build modules as well - -ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) - KBUILD_MODULES := 1 -endif - -ifeq ($(MAKECMDGOALS),) - KBUILD_MODULES := 1 -endif - -export KBUILD_MODULES KBUILD_BUILTIN -export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD - -# We need some generic definitions (do not try to remake the file). -scripts/Kbuild.include: ; -include scripts/Kbuild.include - # Make variables (CC, etc...) AS = $(CROSS_COMPILE)as LD = $(CROSS_COMPILE)ld @@ -373,14 +394,11 @@ LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = LDFLAGS_vmlinux = -CFLAGS_GCOV := -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,) -CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,) - # Use USERINCLUDE when you must reference the UAPI directories only. USERINCLUDE := \ - -I$(srctree)/arch/$(hdr-arch)/include/uapi \ - -I$(objtree)/arch/$(hdr-arch)/include/generated/uapi \ + -I$(srctree)/arch/$(SRCARCH)/include/uapi \ + -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ -I$(srctree)/include/uapi \ -I$(objtree)/include/generated/uapi \ -include $(srctree)/include/linux/kconfig.h @@ -388,40 +406,33 @@ USERINCLUDE := \ # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option LINUXINCLUDE := \ - -I$(srctree)/arch/$(hdr-arch)/include \ - -I$(objtree)/arch/$(hdr-arch)/include/generated \ + -I$(srctree)/arch/$(SRCARCH)/include \ + -I$(objtree)/arch/$(SRCARCH)/include/generated \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ -I$(objtree)/include \ $(USERINCLUDE) -KBUILD_CPPFLAGS := -D__KERNEL__ - +KBUILD_AFLAGS := -D__ASSEMBLY__ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common -fshort-wchar \ -Werror-implicit-function-declaration \ -Wno-format-security \ - -std=gnu89 $(call cc-option,-fno-PIE) - - + -std=gnu89 +KBUILD_CPPFLAGS := -D__KERNEL__ KBUILD_AFLAGS_KERNEL := KBUILD_CFLAGS_KERNEL := -KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE) KBUILD_AFLAGS_MODULE := -DMODULE KBUILD_CFLAGS_MODULE := -DMODULE KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds +GCC_PLUGINS_CFLAGS := -# Read KERNELRELEASE from include/config/kernel.release (if it exists) -KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) -KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) - -export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP HOSTLDFLAGS HOST_LOADLIBES export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS -export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KCOV CFLAGS_KASAN CFLAGS_UBSAN +export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_KASAN CFLAGS_UBSAN export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL @@ -463,73 +474,6 @@ ifneq ($(KBUILD_SRC),) $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) endif -# Support for using generic headers in asm-generic -PHONY += asm-generic uapi-asm-generic -asm-generic: uapi-asm-generic - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ - src=asm obj=arch/$(SRCARCH)/include/generated/asm -uapi-asm-generic: - $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ - src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm - -# To make sure we do not include .config for any of the *config targets -# catch them early, and hand them over to scripts/kconfig/Makefile -# It is allowed to specify more targets when calling make, including -# mixing *config targets and build targets. -# For example 'make oldconfig all'. -# Detect when mixed targets is specified, and make a second invocation -# of make so .config is not included in this case either (for *config). - -version_h := include/generated/uapi/linux/version.h -old_version_h := include/linux/version.h - -no-dot-config-targets := clean mrproper distclean \ - cscope gtags TAGS tags help% %docs check% coccicheck \ - $(version_h) headers_% archheaders archscripts \ - kernelversion %src-pkg - -config-targets := 0 -mixed-targets := 0 -dot-config := 1 - -ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) - ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) - dot-config := 0 - endif -endif - -ifeq ($(KBUILD_EXTMOD),) - ifneq ($(filter config %config,$(MAKECMDGOALS)),) - config-targets := 1 - ifneq ($(words $(MAKECMDGOALS)),1) - mixed-targets := 1 - endif - endif -endif -# install and modules_install need also be processed one by one -ifneq ($(filter install,$(MAKECMDGOALS)),) - ifneq ($(filter modules_install,$(MAKECMDGOALS)),) - mixed-targets := 1 - endif -endif - -ifeq ($(mixed-targets),1) -# =========================================================================== -# We're called with mixed targets (*config and build targets). -# Handle them one by one. - -PHONY += $(MAKECMDGOALS) __build_one_by_one - -$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one - @: - -__build_one_by_one: - $(Q)set -e; \ - for i in $(MAKECMDGOALS); do \ - $(MAKE) -f $(srctree)/Makefile $$i; \ - done - -else ifeq ($(config-targets),1) # =========================================================================== # *config targets only - make sure prerequisites are updated, and descend @@ -552,6 +496,44 @@ else # Build targets only - this includes vmlinux, arch specific targets, clean # targets and others. In general all targets except *config targets. +# If building an external module we do not care about the all: rule +# but instead _all depend on modules +PHONY += all +ifeq ($(KBUILD_EXTMOD),) +_all: all +else +_all: modules +endif + +# Decide whether to build built-in, modular, or both. +# Normally, just do built-in. + +KBUILD_MODULES := +KBUILD_BUILTIN := 1 + +# If we have only "make modules", don't compile built-in objects. +# When we're building modules with modversions, we need to consider +# the built-in objects during the descend as well, in order to +# make sure the checksums are up to date before we record them. + +ifeq ($(MAKECMDGOALS),modules) + KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) +endif + +# If we have "make modules", compile modules +# in addition to whatever we do anyway. +# Just "make" or "make all" shall build modules as well + +ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) + KBUILD_MODULES := 1 +endif + +ifeq ($(MAKECMDGOALS),) + KBUILD_MODULES := 1 +endif + +export KBUILD_MODULES KBUILD_BUILTIN + ifeq ($(KBUILD_EXTMOD),) # Additional helpers built in scripts/ # Carefully list dependencies so we do not try to build scripts twice @@ -622,6 +604,11 @@ endif # Defaults to vmlinux, but the arch makefile usually adds further targets all: vmlinux +KBUILD_CFLAGS += $(call cc-option,-fno-PIE) +KBUILD_AFLAGS += $(call cc-option,-fno-PIE) +CFLAGS_GCOV := -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,) +export CFLAGS_GCOV CFLAGS_KCOV + # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default # values of the respective KBUILD_* variables ARCH_CPPFLAGS := @@ -653,11 +640,12 @@ KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \ KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) # check for 'asm goto' -ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y) +ifeq ($(call shell-cached,$(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y) KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO endif +include scripts/Makefile.kcov include scripts/Makefile.gcc-plugins ifdef CONFIG_READABLE_ASM @@ -789,7 +777,7 @@ KBUILD_CFLAGS += $(call cc-option,-fdata-sections,) endif # arch Makefile may override CC so keep this after arch Makefile is included -NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) +NOSTDINC_FLAGS += -nostdinc -isystem $(call shell-cached,$(CC) -print-file-name=include) CHECKFLAGS += $(NOSTDINC_FLAGS) # warn about C99 declaration after statement @@ -1071,6 +1059,15 @@ prepare0: archprepare gcc-plugins # All the preparing.. prepare: prepare0 prepare-objtool +# Support for using generic headers in asm-generic +PHONY += asm-generic uapi-asm-generic +asm-generic: uapi-asm-generic + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=asm obj=arch/$(SRCARCH)/include/generated/asm +uapi-asm-generic: + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm + PHONY += prepare-objtool prepare-objtool: $(objtool_target) @@ -1139,8 +1136,8 @@ headerdep: #Default location for installed headers export INSTALL_HDR_PATH = $(objtree)/usr -# If we do an all arch process set dst to include/arch-$(hdr-arch) -hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(hdr-arch), dst=include) +# If we do an all arch process set dst to include/arch-$(SRCARCH) +hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(SRCARCH), dst=include) PHONY += archheaders archheaders: @@ -1158,10 +1155,10 @@ headers_install_all: PHONY += headers_install headers_install: __headers - $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \ + $(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \ $(error Headers not exportable for the $(SRCARCH) architecture)) $(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst) + $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all @@ -1170,7 +1167,7 @@ headers_check_all: headers_install_all PHONY += headers_check headers_check: headers_install $(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include HDRCHECK=1 - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst) HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Kernel selftest @@ -1283,7 +1280,7 @@ CLEAN_DIRS += $(MODVERDIR) # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated \ arch/*/include/generated .tmp_objdiff -MRPROPER_FILES += .config .config.old .version .old_version \ +MRPROPER_FILES += .config .config.old .version \ Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ signing_key.pem signing_key.priv signing_key.x509 \ x509.genkey extra_certificates signing_key.x509.keyid \ @@ -1393,7 +1390,7 @@ help: @echo ' export_report - List the usages of all exported symbols' @echo ' headers_check - Sanity check on exported headers' @echo ' headerdep - Detect inclusion cycles in headers' - @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help + @echo ' coccicheck - Check with Coccinelle' @echo '' @echo 'Kernel selftest:' @echo ' kselftest - Build and run kernel selftest (run as root)' @@ -1550,12 +1547,13 @@ clean: $(clean-dirs) $(call cmd,rmfiles) @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ - -o -name '*.ko.*' \ + -o -name '*.ko.*' -o -name '*.dtb' -o -name '*.dtb.S' \ -o -name '*.dwo' \ -o -name '*.su' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ + -o -name .cache.mk \ -o -name '*.c.[012]*.*' \ -o -name '*.ll' \ -o -name '*.gcno' \) -type f -print | xargs rm -f @@ -1702,8 +1700,7 @@ cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \ # read all saved command lines -targets := $(wildcard $(sort $(targets))) -cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) +cmd_files := $(wildcard .*.cmd $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd)) ifneq ($(cmd_files),) $(cmd_files): ; # Do not try to update included dependency files diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 69b875880754f5f54d7e4eeaa026c63bc283a894..b31b974a03cb1f4c88e4129da020cd4fa6ed249d 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -506,7 +506,7 @@ config ALPHA_QEMU Generic kernels will auto-detect QEMU. But when building a system-specific kernel, the assumption is that we want to - elimiate as many runtime tests as possible. + eliminate as many runtime tests as possible. If unsure, say N. diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h index e542cb272b673b543c254a81cc558553a86bbf2d..b78f61f20796b2ea20e6b5b17777f44193783a5d 100644 --- a/arch/alpha/include/asm/dma-mapping.h +++ b/arch/alpha/include/asm/dma-mapping.h @@ -9,6 +9,4 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) return dma_ops; } -#define dma_cache_sync(dev, va, size, dir) ((void)0) - #endif /* _ALPHA_DMA_MAPPING_H */ diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h index bae97eb19d269dd8cf7b8008ddb9833aab68abfd..942924756cf2150750421ef7ad872cf52228e83b 100644 --- a/arch/alpha/include/asm/floppy.h +++ b/arch/alpha/include/asm/floppy.h @@ -24,7 +24,6 @@ #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count) #define fd_enable_irq() enable_irq(FLOPPY_IRQ) #define fd_disable_irq() disable_irq(FLOPPY_IRQ) -#define fd_cacheflush(addr,size) /* nothing */ #define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\ 0, "floppy", NULL) #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL) @@ -62,7 +61,6 @@ alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io) prev_dir = dir; fd_clear_dma_ff(); - fd_cacheflush(addr, size); fd_set_dma_mode(mode); set_dma_addr(FLOPPY_DMA, bus_addr); fd_set_dma_count(size); diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h index fc988c16e8944c18ccc39338776d855ce7fb62e9..b9ec553519248ead670b69cd0a25b8f0882e8327 100644 --- a/arch/alpha/include/asm/pci.h +++ b/arch/alpha/include/asm/pci.h @@ -13,9 +13,6 @@ * The following structure is used to manage multiple PCI busses. */ -struct pci_dev; -struct pci_bus; -struct resource; struct pci_iommu_arena; struct page; @@ -57,8 +54,6 @@ struct pci_controller { #define PCIBIOS_MIN_IO alpha_mv.min_io_address #define PCIBIOS_MIN_MEM alpha_mv.min_mem_address -extern void pcibios_set_master(struct pci_dev *dev); - /* IOMMU controls. */ /* The PCI address space does not equal the physical memory address space. diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h index 6bf730063e3f00105ace8c911aa9dc65cd54649f..2dbdf59258d9765c5ad5f336635c0fd05e1cb24b 100644 --- a/arch/alpha/include/uapi/asm/mman.h +++ b/arch/alpha/include/uapi/asm/mman.h @@ -12,6 +12,7 @@ #define MAP_SHARED 0x01 /* Share changes */ #define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ #define MAP_TYPE 0x0f /* Mask for type of mapping (OSF/1 is _wrong_) */ #define MAP_FIXED 0x100 /* Interpret addr exactly */ #define MAP_ANONYMOUS 0x10 /* don't use a file */ diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 08235bb1f0356405716a22a84cd845fcf18db17f..87da0057994665e5d9594388ff1d451964f98ccc 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -197,9 +197,16 @@ pcibios_init(void) subsys_initcall(pcibios_init); #ifdef ALPHA_RESTORE_SRM_SETUP +/* Store PCI device configuration left by SRM here. */ +struct pdev_srm_saved_conf +{ + struct pdev_srm_saved_conf *next; + struct pci_dev *dev; +}; + static struct pdev_srm_saved_conf *srm_saved_configs; -void pdev_save_srm_config(struct pci_dev *dev) +static void pdev_save_srm_config(struct pci_dev *dev) { struct pdev_srm_saved_conf *tmp; static int printed = 0; @@ -239,6 +246,8 @@ pci_restore_srm_config(void) pci_restore_state(tmp->dev); } } +#else +#define pdev_save_srm_config(dev) do {} while (0) #endif void pcibios_fixup_bus(struct pci_bus *bus) diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h index 26231601630ed7a9d0dca38e52fa2bb18910a526..2e4cb74fdc416b94a776b0f6982f266bebcff47b 100644 --- a/arch/alpha/kernel/pci_impl.h +++ b/arch/alpha/kernel/pci_impl.h @@ -157,16 +157,8 @@ struct pci_iommu_arena #endif #ifdef ALPHA_RESTORE_SRM_SETUP -/* Store PCI device configuration left by SRM here. */ -struct pdev_srm_saved_conf -{ - struct pdev_srm_saved_conf *next; - struct pci_dev *dev; -}; - extern void pci_restore_srm_config(void); #else -#define pdev_save_srm_config(dev) do {} while (0) #define pci_restore_srm_config() do {} while (0) #endif diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 5da0aec8ce904d1bacc7a4811bcb5b17f3276fcf..438b10c44d732355888e856668fc09c5a9685e85 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -65,9 +65,9 @@ srmcons_do_receive_chars(struct tty_port *port) } static void -srmcons_receive_chars(unsigned long data) +srmcons_receive_chars(struct timer_list *t) { - struct srmcons_private *srmconsp = (struct srmcons_private *)data; + struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer); struct tty_port *port = &srmconsp->port; unsigned long flags; int incr = 10; @@ -206,8 +206,7 @@ static const struct tty_operations srmcons_ops = { static int __init srmcons_init(void) { - setup_timer(&srmcons_singleton.timer, srmcons_receive_chars, - (unsigned long)&srmcons_singleton); + timer_setup(&srmcons_singleton.timer, srmcons_receive_chars, 0); if (srm_is_registered_console) { struct tty_driver *driver; int err; diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index c84e67fdea095cbed225edac052f4ce07007abb9..5c7adf100a582ba1d1a4c3d2760d1d7103e0eb0d 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -298,7 +298,7 @@ config ARC_MMU_V1 config ARC_MMU_V2 bool "MMU v2" help - Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio + Fixed the deficiency of v1 - possible thrashing in memcpy scenario when 2 D-TLB and 1 I-TLB entries index into same 2way set. config ARC_MMU_V3 @@ -371,7 +371,7 @@ config ARC_FPU_SAVE_RESTORE bool "Enable FPU state persistence across context switch" default n help - Double Precision Floating Point unit had dedictaed regs which + Double Precision Floating Point unit had dedicated regs which need to be saved/restored across context-switch. Note that ARC FPU is overly simplistic, unlike say x86, which has hardware pieces to allow software to conditionally save/restore, @@ -467,7 +467,7 @@ config ARC_PLAT_NEEDS_PHYS_TO_DMA bool config ARC_KVADDR_SIZE - int "Kernel Virtaul Address Space size (MB)" + int "Kernel Virtual Address Space size (MB)" range 0 512 default "256" help diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore index 5246969a20c5fb323acf72b3b96dbc2976bfce4c..c4c5fd529c251d126b28ff8c3c5e77b6d6a45e2b 100644 --- a/arch/arc/boot/.gitignore +++ b/arch/arc/boot/.gitignore @@ -1,2 +1 @@ -*.dtb* uImage diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile index 83c9e076ef6309f7b6d49fd43764eb6a2342bad5..22a4c5d4702fe62c71f434a0bbba44f2c8cd461d 100644 --- a/arch/arc/boot/dts/Makefile +++ b/arch/arc/boot/dts/Makefile @@ -11,8 +11,6 @@ dtb-y := $(builtindtb-y).dtb .SECONDARY: $(obj)/$(builtindtb-y).dtb.S -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) - -always := $(dtb-y) -clean-files := *.dtb *.dtb.S +# for CONFIG_OF_ALL_DTBS test +dtstree := $(srctree)/$(src) +dtb- := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d1346a16076033acb8d3d60e5de846d7ee2e0e3b..51c8df5610777459c727e30cc65ef6fe7aa41b66 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,6 +3,7 @@ config ARM bool default y select ARCH_CLOCKSOURCE_DATA + select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE @@ -240,15 +241,6 @@ config NEED_RET_TO_USER config ARCH_MTD_XIP bool -config VECTORS_BASE - hex - default 0xffff0000 if MMU || CPU_HIGH_VECTOR - default DRAM_BASE if REMAP_VECTORS_TO_RAM - default 0x00000000 - help - The base address of exception vectors. This must be two pages - in size. - config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED default y @@ -379,7 +371,7 @@ config ARCH_EBSA110 config ARCH_EP93XX bool "EP93xx-based" - select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_SPARSEMEM_ENABLE select ARM_AMBA imply ARM_PATCH_PHYS_VIRT select ARM_VIC @@ -2006,6 +1998,17 @@ config XIP_PHYS_ADDR be linked for and stored to. This address is dependent on your own flash usage. +config XIP_DEFLATED_DATA + bool "Store kernel .data section compressed in ROM" + depends on XIP_KERNEL + select ZLIB_INFLATE + help + Before the kernel is actually executed, its .data section has to be + copied to RAM from ROM. This option allows for storing that data + in compressed form and decompressed to RAM rather than merely being + copied, saving some precious ROM space. A possible drawback is a + slightly longer boot delay. + config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 22f34c423be68a92b6435c6f0ebd2766d4de4380..1168a03c85255fbe7295c0fad7f77fb7d2e9b2af 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -53,8 +53,8 @@ config REMAP_VECTORS_TO_RAM config ARM_MPU bool 'Use the ARM v7 PMSA Compliant MPU' - depends on CPU_V7 - default y + depends on CPU_V7 || CPU_V7M + default y if CPU_V7 help Some ARM systems without an MMU have instead a Memory Protection Unit (MPU) that defines the type and permissions for regions of diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 954ba8b810521296e5fb6e1800deab756aa41c12..12b8c8f8ec0708f24e5f953857044d45660d618f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -170,6 +170,11 @@ choice depends on ARCH_BCM_5301X || ARCH_BCM_NSP select DEBUG_UART_8250 + config DEBUG_BCM_HR2 + bool "Kernel low-level debugging on Hurricane 2 UART2" + depends on ARCH_BCM_HR2 + select DEBUG_UART_8250 + config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" depends on ARCH_BCM_MOBILE @@ -912,6 +917,13 @@ choice Say Y here if you want kernel low-level debugging support via SCIF2 on Renesas R-Car E2 (R8A7794). + config DEBUG_RCAR_GEN2_SCIF4 + bool "Kernel low-level debugging messages via SCIF4 on R8A7745" + depends on ARCH_R8A7745 + help + Say Y here if you want kernel low-level debugging support + via SCIF4 on Renesas RZ/G1E (R8A7745). + config DEBUG_RMOBILE_SCIFA0 bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" depends on ARCH_R8A73A4 @@ -1452,6 +1464,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 @@ -1509,6 +1522,7 @@ config DEBUG_UART_PHYS default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if DEBUG_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X + default 0x18000400 if DEBUG_BCM_HR2 default 0x18010000 if DEBUG_SIRFATLAS7_UART0 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1571,6 +1585,7 @@ config DEBUG_UART_PHYS default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 + default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE @@ -1605,6 +1620,7 @@ config DEBUG_UART_PHYS DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ + DEBUG_RCAR_GEN2_SCIF4 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ @@ -1624,6 +1640,7 @@ config DEBUG_UART_VIRT default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1000400 if DEBUG_BCM_HR2 default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 @@ -1729,7 +1746,8 @@ config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ - DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 + DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ + DEBUG_OMAP7XXUART3 default 2 config DEBUG_UART_8250_WORD diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 36ae4454554ce1a11cc65848c60569bf8b3e0abe..80351e505fd57aeb0413a80e61214e341a3e2f48 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -16,11 +16,11 @@ LDFLAGS := LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 -LDFLAGS_MODULE += --be8 +KBUILD_LDFLAGS_MODULE += --be8 endif ifeq ($(CONFIG_ARM_MODULE_PLTS),y) -LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds +KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds endif GZFLAGS :=-9 @@ -122,7 +122,7 @@ CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) -CFLAGS_MODULE +=-fno-optimize-sibling-calls +KBUILD_CFLAGS_MODULE +=-fno-optimize-sibling-calls endif else CFLAGS_ISA :=$(call cc-option,-marm,) @@ -149,6 +149,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000 endif textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 +textofs-$(CONFIG_ARCH_MESON) := 0x00208000 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore index 3c79f85975aaa26c7c2e353fefc54d71d89bc5bf..ce1c5ff746e7d2930fc0ec2005b6e65b35bd9a91 100644 --- a/arch/arm/boot/.gitignore +++ b/arch/arm/boot/.gitignore @@ -3,4 +3,3 @@ zImage xipImage bootpImage uImage -*.dtb diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 50f8d1be7fcbe7cdcecb37f54f2b24f514a65974..a3af4dc08c3e94a67ef0c06d8f9402ca1910f420 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -31,8 +31,19 @@ targets := Image zImage xipImage bootpImage uImage ifeq ($(CONFIG_XIP_KERNEL),y) +cmd_deflate_xip_data = $(CONFIG_SHELL) -c \ + '$(srctree)/$(src)/deflate_xip_data.sh $< $@ || { rm -f $@; false; }' + +ifeq ($(CONFIG_XIP_DEFLATED_DATA),y) +quiet_cmd_mkxip = XIPZ $@ +cmd_mkxip = $(cmd_objcopy) && $(cmd_deflate_xip_data) +else +quiet_cmd_mkxip = $(quiet_cmd_objcopy) +cmd_mkxip = $(cmd_objcopy) +endif + $(obj)/xipImage: vmlinux FORCE - $(call if_changed,objcopy) + $(call if_changed,mkxip) @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)' $(obj)/Image $(obj)/zImage: FORCE diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a5889238fc9fc6fe6f3c2dc1b2c7e172fc597594..45a6b9b7af2a56f179427d353ad70c3cd920bb69 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -117,8 +117,11 @@ ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ - awk 'END{print $$3}') +KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ + perl -e 'while (<>) { \ + $$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \ + $$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \ + }; printf "%d\n", $$bss_end - $$bss_start;') LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 8a756870c238435af684215c653f54a739f4f1a5..45c8823c37503d3bfdc2beee80304c556db8bf53 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -143,6 +143,8 @@ start: .word _magic_start @ absolute load/run zImage address .word _magic_end @ zImage end address .word 0x04030201 @ endianness flag + .word 0x45454545 @ another magic number to indicate + .word _magic_table @ additional data table __EFI_HEADER 1: diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index 7d06aa19c3e6b5664c0e17a4de826b0810e78730..e6bf6774c4bb9903436469ad2ef8a0d97039730a 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -44,12 +44,22 @@ SECTIONS *(.glue_7t) *(.glue_7) } + .table : ALIGN(4) { + _table_start = .; + LONG(ZIMAGE_MAGIC(2)) + LONG(ZIMAGE_MAGIC(0x5a534c4b)) + LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start)) + LONG(ZIMAGE_MAGIC(_kernel_bss_size)) + LONG(0) + _table_end = .; + } .rodata : { *(.rodata) *(.rodata.*) } .piggydata : { *(.piggydata) + __piggy_size_addr = . - 4; } . = ALIGN(4); @@ -97,6 +107,7 @@ SECTIONS _magic_sig = ZIMAGE_MAGIC(0x016f2818); _magic_start = ZIMAGE_MAGIC(_start); _magic_end = ZIMAGE_MAGIC(_edata); + _magic_table = ZIMAGE_MAGIC(_table_start - _start); . = BSS_START; __bss_start = .; diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh new file mode 100755 index 0000000000000000000000000000000000000000..1189598a25ebb01dc13fbb03a510f0750d709398 --- /dev/null +++ b/arch/arm/boot/deflate_xip_data.sh @@ -0,0 +1,64 @@ +#!/bin/sh + +# XIP kernel .data segment compressor +# +# Created by: Nicolas Pitre, August 2017 +# Copyright: (C) 2017 Linaro Limited +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. + +# This script locates the start of the .data section in xipImage and +# substitutes it with a compressed version. The needed offsets are obtained +# from symbol addresses in vmlinux. It is expected that .data extends to +# the end of xipImage. + +set -e + +VMLINUX="$1" +XIPIMAGE="$2" + +DD="dd status=none" + +# Use "make V=1" to debug this script. +case "$KBUILD_VERBOSE" in +*1*) + set -x + ;; +esac + +sym_val() { + # extract hex value for symbol in $1 + local val=$($NM "$VMLINUX" | sed -n "/ $1$/{s/ .*$//p;q}") + [ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; } + # convert from hex to decimal + echo $((0x$val)) +} + +__data_loc=$(sym_val __data_loc) +_edata_loc=$(sym_val _edata_loc) +base_offset=$(sym_val _xiprom) + +# convert to file based offsets +data_start=$(($__data_loc - $base_offset)) +data_end=$(($_edata_loc - $base_offset)) + +# Make sure data occupies the last part of the file. +file_end=$(stat -c "%s" "$XIPIMAGE") +if [ "$file_end" != "$data_end" ]; then + printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \ + $(($file_end + $base_offset)) $_edata_loc 2>&1 + exit 1; +fi + +# be ready to clean up +trap 'rm -f "$XIPIMAGE.tmp"' 0 1 2 3 + +# substitute the data section by a compressed version +$DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp" +$DD if="$XIPIMAGE" skip=$data_start iflag=skip_bytes | +gzip -9 >> "$XIPIMAGE.tmp" + +# replace kernel binary +mv -f "$XIPIMAGE.tmp" "$XIPIMAGE" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index eff87a3445662c767bf6f4b24a94620148ab11e3..d0381e9caf216bdbb6a398374551ef6411830901 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -101,6 +101,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ + bcm47094-luxul-abr-4500.dtb \ + bcm47094-luxul-xbr-4500.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-netgear-r8500.dtb \ bcm94708.dtb \ @@ -109,6 +111,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm953012hr.dtb \ bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_53573) += \ + bcm47189-luxul-xap-1440.dtb \ + bcm47189-luxul-xap-810.dtb \ bcm47189-tenda-ac9.dtb \ bcm947189acdbmr.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ @@ -118,6 +122,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm911360k.dtb \ bcm958300k.dtb \ bcm958305k.dtb +dtb-$(CONFIG_ARCH_BCM_HR2) += \ + bcm53340-ubnt-unifi-switch8.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb \ @@ -177,6 +183,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ + exynos5422-odroidhc1.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ exynos5422-odroidxu4.dtb \ @@ -342,12 +349,14 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-babbage.dtb \ imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ - imx51-ts4800.dtb + imx51-ts4800.dtb \ + imx51-zii-rdu1.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-cx9020.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ + imx53-ppd.dtb \ imx53-qsb.dtb \ imx53-qsrb.dtb \ imx53-smd.dtb \ @@ -389,14 +398,19 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-ts4900.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ + imx6dl-tx6s-8034-mb7.dtb \ imx6dl-tx6s-8035.dtb \ + imx6dl-tx6s-8035-mb7.dtb \ imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-80xx-mb7.dtb \ imx6dl-tx6u-8033.dtb \ + imx6dl-tx6u-8033-mb7.dtb \ imx6dl-tx6u-811x.dtb \ imx6dl-tx6u-81xx-mb7.dtb \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ + imx6dl-wandboard-revd1.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ @@ -408,6 +422,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ + imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ imx6q-evi.dtb \ imx6q-gk802.dtb \ @@ -435,6 +450,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-nitrogen6_som2.dtb \ imx6q-novena.dtb \ imx6q-phytec-pbab01.dtb \ + imx6q-pistachio.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ @@ -448,17 +464,25 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ imx6q-tx6q-1036.dtb \ + imx6q-tx6q-1036-mb7.dtb \ + imx6q-tx6q-10x0-mb7.dtb \ imx6q-tx6q-1110.dtb \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ imx6q-utilite-pro.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ + imx6q-wandboard-revd1.dtb \ imx6q-zii-rdu2.dtb \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ + imx6qp-tx6qp-8037.dtb \ + imx6qp-tx6qp-8037-mb7.dtb \ + imx6qp-tx6qp-8137.dtb \ + imx6qp-tx6qp-8137-mb7.dtb \ + imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ @@ -469,6 +493,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sdb-reva.dtb \ imx6sx-sdb-sai.dtb \ imx6sx-sdb.dtb \ + imx6sx-softing-vining-2000.dtb \ imx6sx-udoo-neo-basic.dtb \ imx6sx-udoo-neo-extended.dtb \ imx6sx-udoo-neo-full.dtb @@ -681,6 +706,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-netgear-wnr854t.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_ACTIONS) += \ + owl-s500-cubieboard6.dtb \ owl-s500-guitar-bb-rev-b.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb @@ -701,7 +727,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ + qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ + qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ @@ -725,7 +753,9 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7743-iwg20d-q7.dtb \ + r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ + r8a7745-iwg22d-sodimm.dtb \ r8a7745-sk-rzg1e.dtb \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ @@ -768,7 +798,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ - rk3288-veyron-speedy.dtb + rk3288-veyron-speedy.dtb \ + rk3288-vyasa.dtb dtb-$(CONFIG_ARCH_S3C24XX) += \ s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += \ @@ -891,6 +922,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-olinuxino-micro-emmc.dtb \ sun7i-a20-orangepi.dtb \ sun7i-a20-orangepi-mini.dtb \ sun7i-a20-pcduino3.dtb \ @@ -916,6 +948,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-bananapi-m3.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-a83t-tbs-a711.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ @@ -932,8 +965,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-parrot.dtb \ + sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-v3s-licheepi-zero.dtb \ - sun8i-v3s-licheepi-zero-dock.dtb + sun8i-v3s-licheepi-zero-dock.dtb \ + sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb @@ -1070,9 +1105,3 @@ dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-ast2500-evb.dtb endif - -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) - -always := $(dtb-y) -clean-files := *.dtb diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index e58fab8aec5df2a885ea8c04f9eefda09cf2d307..1b81c4e757727d2abcc798fefaaa55e0b0fecfec 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -130,9 +130,11 @@ }; }; - pmu { + pmu@4b000000 { compatible = "arm,cortex-a8-pmu"; interrupts = <3>; + reg = <0x4b000000 0x1000000>; + ti,hwmods = "debugss"; }; /* @@ -929,6 +931,12 @@ }; }; + emif: emif@4c000000 { + compatible = "ti,emif-am3352"; + reg = <0x4c000000 0x1000000>; + ti,hwmods = "emif"; + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 081fa68b6f98049ad2edb1c9c6d579c0958a7a2d..a04d79ec212a9f2d94fc5197b1556821b8198af7 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -75,6 +75,9 @@ compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&matrix_keypad_default>; + pinctrl-1 = <&matrix_keypad_sleep>; row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ @@ -145,6 +148,43 @@ }; &am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&unused_pins>; + + unused_pins: unused_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -198,7 +238,7 @@ >; }; - nand_flash_x8: nand_flash_x8 { + nand_flash_x8_default: nand_flash_x8_default { pinctrl-single,pins = < AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ @@ -219,12 +259,39 @@ >; }; - ecap0_pins: backlight_pins { + nand_flash_x8_sleep: nand_flash_x8_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + + ecap0_pins_default: backlight_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; + ecap0_pins_sleep: backlight_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */ @@ -232,7 +299,7 @@ >; }; - spi0_pins: pinmux_spi0_pins { + spi0_pins_default: pinmux_spi0_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ @@ -241,7 +308,16 @@ >; }; - spi1_pins: pinmux_spi1_pins { + spi0_pins_sleep: pinmux_spi0_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + + spi1_pins_default: pinmux_spi1_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ @@ -250,13 +326,54 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + spi1_pins_sleep: pinmux_spi1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; - qspi1_default: qspi1_default { + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7) + >; + }; + + matrix_keypad_default: matrix_keypad_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* mii1_tx_clk.gpio3_9 */ + AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7) /* mii1_rx_clk.gpio3_10 */ + AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd3.gpio2_18 */ + AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd2.gpio2_19 */ + AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ + AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ + AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.gpio0_14 */ + AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.gpio0_15 */ + >; + }; + + matrix_keypad_sleep: matrix_keypad_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + qspi1_pins_default: qspi1_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3) AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2) @@ -267,12 +384,29 @@ >; }; - pixcir_ts_pins: pixcir_ts_pins { + qspi1_pins_sleep: qspi1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; + + pixcir_ts_pins_default: pixcir_ts_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ >; }; + pixcir_ts_pins_sleep: pixcir_ts_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ + >; + }; + hdq_pins: pinmux_hdq_pins { pinctrl-single,pins = < AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ @@ -355,6 +489,48 @@ >; }; + uart0_pins_default: uart0_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart0_pins_sleep: uart0_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) + AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) + >; + }; + + usb2_phy1_default: usb2_phy1_default { + pinctrl-single,pins = < + AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + usb2_phy1_sleep: usb2_phy1_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb2_phy2_default: usb2_phy2_default { + pinctrl-single,pins = < + AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + usb2_phy2_sleep: usb2_phy2_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ @@ -378,8 +554,9 @@ status = "okay"; vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; @@ -478,8 +655,10 @@ pixcir_ts@5c { compatible = "pixcir,pixcir_tangoc"; - pinctrl-names = "default"; - pinctrl-0 = <&pixcir_ts_pins>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pixcir_ts_pins_default>; + pinctrl-1 = <&pixcir_ts_pins_sleep>; + reg = <0x5c>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_EDGE_FALLING>; @@ -550,8 +729,9 @@ &gpmc { status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ - pinctrl-names = "default"; - pinctrl-0 = <&nand_flash_x8>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&nand_flash_x8_default>; + pinctrl-1 = <&nand_flash_x8_sleep>; ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -647,24 +827,30 @@ &ecap0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ecap0_pins_default>; + pinctrl-1 = <&ecap0_pins_sleep>; }; &spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi0_pins_default>; + pinctrl-1 = <&spi0_pins_sleep>; }; &spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_default>; + pinctrl-1 = <&spi1_pins_sleep>; }; &usb2_phy1 { status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb2_phy1_default>; + pinctrl-1 = <&usb2_phy1_sleep>; }; &usb1 { @@ -674,6 +860,9 @@ &usb2_phy2 { status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb2_phy2_default>; + pinctrl-1 = <&usb2_phy2_sleep>; }; &usb2 { @@ -683,8 +872,9 @@ &qspi { status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */ - pinctrl-names = "default"; - pinctrl-0 = <&qspi1_default>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi1_pins_default>; + pinctrl-1 = <&qspi1_pins_sleep>; spi-max-frequency = <48000000>; m25p80@0 { @@ -770,6 +960,13 @@ }; }; +&uart0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_pins_default>; + pinctrl-1 = <&uart0_pins_sleep>; +}; + &mcasp1 { #sound-dai-cells = <0>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 4978011df5bd5899b66ffbe36bbcf711fec7da7e..95040810c0949e0af55b7e48db4107e5281b4f02 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -316,32 +316,32 @@ * change the default environment, unless you know * what you are doing. */ - partition@00000000 { /* u-boot */ + partition@0 { /* u-boot */ label = "RedBoot"; reg = <0x00000000 0x000c0000>; /* 768KB */ }; - partition@000c0000 { /* uImage */ + partition@c0000 { /* uImage */ label = "zImage"; reg = <0x000c0000 0x002d0000>; /* 2880KB */ }; - partition@00390000 { /* uInitramfs */ + partition@390000 { /* uInitramfs */ label = "rd.gz"; reg = <0x00390000 0x00440000>; /* 4250KB */ }; - partition@007d0000 { /* MAC address and serial number */ + partition@7d0000 { /* MAC address and serial number */ label = "vendor"; reg = <0x007d0000 0x00010000>; /* 64KB */ }; - partition@007e0000 { + partition@7e0000 { label = "RedBoot config"; reg = <0x007e0000 0x00010000>; /* 64KB */ }; - partition@007f0000 { + partition@7f0000 { label = "FIS directory"; reg = <0x007f0000 0x00010000>; /* 64KB */ }; diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 31510eb56f108e8a8708bb6e4a513fb137982c13..36ad571e76f31c85aff97acc42d7991ddf184e50 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -267,35 +267,35 @@ * enumerated. The MAC address and the serial number are listed * in the "vendor" partition. */ - partition@00000000 { + partition@0 { label = "RedBoot"; reg = <0x00000000 0x000f0000>; read-only; }; - partition@000c0000 { + partition@c0000 { label = "zImage"; reg = <0x000f0000 0x002d0000>; }; - partition@00390000 { + partition@390000 { label = "rd.gz"; reg = <0x003c0000 0x00410000>; }; - partition@007d0000 { + partition@7d0000 { label = "vendor"; reg = <0x007d0000 0x00010000>; read-only; }; - partition@007e0000 { + partition@7e0000 { label = "RedBoot config"; reg = <0x007e0000 0x00010000>; read-only; }; - partition@007f0000 { + partition@7f0000 { label = "FIS directory"; reg = <0x007f0000 0x00010000>; read-only; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index d8e05bab0cee5104e74edb5ad0d8635d07079653..d7228a5461c828d495546f939cd9fddfd6356dbd 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -332,32 +332,32 @@ * change the default environment, unless you know * what you are doing. */ - partition@00000000 { /* u-boot */ + partition@0 { /* u-boot */ label = "RedBoot"; reg = <0x00000000 0x000d0000>; /* 832KB */ }; - partition@000c0000 { /* uImage */ + partition@c0000 { /* uImage */ label = "zImage"; reg = <0x000d0000 0x002d0000>; /* 2880KB */ }; - partition@003a0000 { /* uInitramfs */ + partition@3a0000 { /* uInitramfs */ label = "rd.gz"; reg = <0x003a0000 0x00430000>; /* 4250KB */ }; - partition@007d0000 { /* MAC address and serial number */ + partition@7d0000 { /* MAC address and serial number */ label = "vendor"; reg = <0x007d0000 0x00010000>; /* 64KB */ }; - partition@007e0000 { + partition@7e0000 { label = "RedBoot config"; reg = <0x007e0000 0x00010000>; /* 64KB */ }; - partition@007f0000 { + partition@7f0000 { label = "FIS directory"; reg = <0x007f0000 0x00010000>; /* 64KB */ }; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 767cbe8d8557a1d111443c0c0e119b578d591b9a..2ed11773048d2e6a0f2d62112ed378c9572367bf 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -151,7 +151,6 @@ interrupts = , ; interrupt-affinity = <&cpu0>, <&cpu1>; - interrupt-parent = <&intc>; }; pcie: pcie@f8050000 { @@ -185,7 +184,6 @@ compatible = "simple-bus"; #address-cells = <0x1>; #size-cells = <0x1>; - interrupt-parent = <&intc>; ranges; dma-ranges = <0x80000000 0x00000000 0x40000000>; dma-coherent; @@ -195,7 +193,6 @@ clocks = <ð_phy_ref_clk>, <&clkctrl ARTPEC6_CLK_ETH_ACLK>; compatible = "snps,dwc-qos-ethernet-4.10"; - interrupt-parent = <&intc>; interrupts = ; reg = <0xf8010000 0x4000>; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index f53e89d63477ee1cef6bf3b6e6ee9f995f4e4525..602bc10fdaf4829d5eb5de8eea03961f399167f2 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -60,3 +60,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; }; + +&i2c3 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c7 { + status = "okay"; + + lm75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index e1b523bd5b8b3b90616ccc272120c5ed52593819..c786bc2f2919b8586e60363a4314978eb61dbae9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -7,10 +7,6 @@ model = "Palmetto BMC"; compatible = "tyan,palmetto-bmc", "aspeed,ast2400"; - aliases { - serial4 = &uart5; - }; - chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -62,3 +58,55 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; + + rtc@68 { + compatible = "dallas,ds3231"; + reg = <0x68>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + tmp423@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 6dd77cba191c01a66ec57da0a27575394a31ea45..8067793129ea450f0e416fa18c13e525997d57a9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -80,3 +80,61 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + /* PCIe slot 1 (x8) */ + status = "okay"; +}; + +&i2c7 { + /* PCIe slot 2 (x16) */ + status = "okay"; +}; + +&i2c8 { + /* PCIe slot 3 (x16) */ + status = "okay"; +}; + +&i2c9 { + /* PCIe slot 4 (x16) */ + status = "okay"; +}; + +&i2c10 { + /* PCIe slot 5 (x8) */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index fcc5efbd0879b7ab4fdbdd545fff0404c413e6d9..45d815a86d420b9f8f108919bb846f865f9b5231 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -8,6 +8,29 @@ #size-cells = <1>; interrupt-parent = <&vic>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &vuart; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -110,7 +133,7 @@ clock-frequency = <192000000>; }; - clk_apb: clk_apb@08 { + clk_apb: clk_apb@8 { #clock-cells = <0>; compatible = "aspeed,g4-apb-clock", "fixed-clock"; reg = <0x08>; @@ -127,750 +150,17 @@ pinctrl: pinctrl { compatible = "aspeed,g4-pinctrl"; - - pinctrl_acpi_default: acpi_default { - function = "ACPI"; - groups = "ACPI"; - }; - - pinctrl_adc0_default: adc0_default { - function = "ADC0"; - groups = "ADC0"; - }; - - pinctrl_adc1_default: adc1_default { - function = "ADC1"; - groups = "ADC1"; - }; - - pinctrl_adc10_default: adc10_default { - function = "ADC10"; - groups = "ADC10"; - }; - - pinctrl_adc11_default: adc11_default { - function = "ADC11"; - groups = "ADC11"; - }; - - pinctrl_adc12_default: adc12_default { - function = "ADC12"; - groups = "ADC12"; - }; - - pinctrl_adc13_default: adc13_default { - function = "ADC13"; - groups = "ADC13"; - }; - - pinctrl_adc14_default: adc14_default { - function = "ADC14"; - groups = "ADC14"; - }; - - pinctrl_adc15_default: adc15_default { - function = "ADC15"; - groups = "ADC15"; - }; - - pinctrl_adc2_default: adc2_default { - function = "ADC2"; - groups = "ADC2"; - }; - - pinctrl_adc3_default: adc3_default { - function = "ADC3"; - groups = "ADC3"; - }; - - pinctrl_adc4_default: adc4_default { - function = "ADC4"; - groups = "ADC4"; - }; - - pinctrl_adc5_default: adc5_default { - function = "ADC5"; - groups = "ADC5"; - }; - - pinctrl_adc6_default: adc6_default { - function = "ADC6"; - groups = "ADC6"; - }; - - pinctrl_adc7_default: adc7_default { - function = "ADC7"; - groups = "ADC7"; - }; - - pinctrl_adc8_default: adc8_default { - function = "ADC8"; - groups = "ADC8"; - }; - - pinctrl_adc9_default: adc9_default { - function = "ADC9"; - groups = "ADC9"; - }; - - pinctrl_bmcint_default: bmcint_default { - function = "BMCINT"; - groups = "BMCINT"; - }; - - pinctrl_ddcclk_default: ddcclk_default { - function = "DDCCLK"; - groups = "DDCCLK"; - }; - - pinctrl_ddcdat_default: ddcdat_default { - function = "DDCDAT"; - groups = "DDCDAT"; - }; - - pinctrl_extrst_default: extrst_default { - function = "EXTRST"; - groups = "EXTRST"; - }; - - pinctrl_flack_default: flack_default { - function = "FLACK"; - groups = "FLACK"; - }; - - pinctrl_flbusy_default: flbusy_default { - function = "FLBUSY"; - groups = "FLBUSY"; - }; - - pinctrl_flwp_default: flwp_default { - function = "FLWP"; - groups = "FLWP"; - }; - - pinctrl_gpid_default: gpid_default { - function = "GPID"; - groups = "GPID"; - }; - - pinctrl_gpid0_default: gpid0_default { - function = "GPID0"; - groups = "GPID0"; - }; - - pinctrl_gpid2_default: gpid2_default { - function = "GPID2"; - groups = "GPID2"; - }; - - pinctrl_gpid4_default: gpid4_default { - function = "GPID4"; - groups = "GPID4"; - }; - - pinctrl_gpid6_default: gpid6_default { - function = "GPID6"; - groups = "GPID6"; - }; - - pinctrl_gpie0_default: gpie0_default { - function = "GPIE0"; - groups = "GPIE0"; - }; - - pinctrl_gpie2_default: gpie2_default { - function = "GPIE2"; - groups = "GPIE2"; - }; - - pinctrl_gpie4_default: gpie4_default { - function = "GPIE4"; - groups = "GPIE4"; - }; - - pinctrl_gpie6_default: gpie6_default { - function = "GPIE6"; - groups = "GPIE6"; - }; - - pinctrl_i2c10_default: i2c10_default { - function = "I2C10"; - groups = "I2C10"; - }; - - pinctrl_i2c11_default: i2c11_default { - function = "I2C11"; - groups = "I2C11"; - }; - - pinctrl_i2c12_default: i2c12_default { - function = "I2C12"; - groups = "I2C12"; - }; - - pinctrl_i2c13_default: i2c13_default { - function = "I2C13"; - groups = "I2C13"; - }; - - pinctrl_i2c14_default: i2c14_default { - function = "I2C14"; - groups = "I2C14"; - }; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_i2c4_default: i2c4_default { - function = "I2C4"; - groups = "I2C4"; - }; - - pinctrl_i2c5_default: i2c5_default { - function = "I2C5"; - groups = "I2C5"; - }; - - pinctrl_i2c6_default: i2c6_default { - function = "I2C6"; - groups = "I2C6"; - }; - - pinctrl_i2c7_default: i2c7_default { - function = "I2C7"; - groups = "I2C7"; - }; - - pinctrl_i2c8_default: i2c8_default { - function = "I2C8"; - groups = "I2C8"; - }; - - pinctrl_i2c9_default: i2c9_default { - function = "I2C9"; - groups = "I2C9"; - }; - - pinctrl_lpcpd_default: lpcpd_default { - function = "LPCPD"; - groups = "LPCPD"; - }; - - pinctrl_lpcpme_default: lpcpme_default { - function = "LPCPME"; - groups = "LPCPME"; - }; - - pinctrl_lpcrst_default: lpcrst_default { - function = "LPCRST"; - groups = "LPCRST"; - }; - - pinctrl_lpcsmi_default: lpcsmi_default { - function = "LPCSMI"; - groups = "LPCSMI"; - }; - - pinctrl_mac1link_default: mac1link_default { - function = "MAC1LINK"; - groups = "MAC1LINK"; - }; - - pinctrl_mac2link_default: mac2link_default { - function = "MAC2LINK"; - groups = "MAC2LINK"; - }; - - pinctrl_mdio1_default: mdio1_default { - function = "MDIO1"; - groups = "MDIO1"; - }; - - pinctrl_mdio2_default: mdio2_default { - function = "MDIO2"; - groups = "MDIO2"; - }; - - pinctrl_ncts1_default: ncts1_default { - function = "NCTS1"; - groups = "NCTS1"; - }; - - pinctrl_ncts2_default: ncts2_default { - function = "NCTS2"; - groups = "NCTS2"; - }; - - pinctrl_ncts3_default: ncts3_default { - function = "NCTS3"; - groups = "NCTS3"; - }; - - pinctrl_ncts4_default: ncts4_default { - function = "NCTS4"; - groups = "NCTS4"; - }; - - pinctrl_ndcd1_default: ndcd1_default { - function = "NDCD1"; - groups = "NDCD1"; - }; - - pinctrl_ndcd2_default: ndcd2_default { - function = "NDCD2"; - groups = "NDCD2"; - }; - - pinctrl_ndcd3_default: ndcd3_default { - function = "NDCD3"; - groups = "NDCD3"; - }; - - pinctrl_ndcd4_default: ndcd4_default { - function = "NDCD4"; - groups = "NDCD4"; - }; - - pinctrl_ndsr1_default: ndsr1_default { - function = "NDSR1"; - groups = "NDSR1"; - }; - - pinctrl_ndsr2_default: ndsr2_default { - function = "NDSR2"; - groups = "NDSR2"; - }; - - pinctrl_ndsr3_default: ndsr3_default { - function = "NDSR3"; - groups = "NDSR3"; - }; - - pinctrl_ndsr4_default: ndsr4_default { - function = "NDSR4"; - groups = "NDSR4"; - }; - - pinctrl_ndtr1_default: ndtr1_default { - function = "NDTR1"; - groups = "NDTR1"; - }; - - pinctrl_ndtr2_default: ndtr2_default { - function = "NDTR2"; - groups = "NDTR2"; - }; - - pinctrl_ndtr3_default: ndtr3_default { - function = "NDTR3"; - groups = "NDTR3"; - }; - - pinctrl_ndtr4_default: ndtr4_default { - function = "NDTR4"; - groups = "NDTR4"; - }; - - pinctrl_ndts4_default: ndts4_default { - function = "NDTS4"; - groups = "NDTS4"; - }; - - pinctrl_nri1_default: nri1_default { - function = "NRI1"; - groups = "NRI1"; - }; - - pinctrl_nri2_default: nri2_default { - function = "NRI2"; - groups = "NRI2"; - }; - - pinctrl_nri3_default: nri3_default { - function = "NRI3"; - groups = "NRI3"; - }; - - pinctrl_nri4_default: nri4_default { - function = "NRI4"; - groups = "NRI4"; - }; - - pinctrl_nrts1_default: nrts1_default { - function = "NRTS1"; - groups = "NRTS1"; - }; - - pinctrl_nrts2_default: nrts2_default { - function = "NRTS2"; - groups = "NRTS2"; - }; - - pinctrl_nrts3_default: nrts3_default { - function = "NRTS3"; - groups = "NRTS3"; - }; - - pinctrl_oscclk_default: oscclk_default { - function = "OSCCLK"; - groups = "OSCCLK"; - }; - - pinctrl_pwm0_default: pwm0_default { - function = "PWM0"; - groups = "PWM0"; - }; - - pinctrl_pwm1_default: pwm1_default { - function = "PWM1"; - groups = "PWM1"; - }; - - pinctrl_pwm2_default: pwm2_default { - function = "PWM2"; - groups = "PWM2"; - }; - - pinctrl_pwm3_default: pwm3_default { - function = "PWM3"; - groups = "PWM3"; - }; - - pinctrl_pwm4_default: pwm4_default { - function = "PWM4"; - groups = "PWM4"; - }; - - pinctrl_pwm5_default: pwm5_default { - function = "PWM5"; - groups = "PWM5"; - }; - - pinctrl_pwm6_default: pwm6_default { - function = "PWM6"; - groups = "PWM6"; - }; - - pinctrl_pwm7_default: pwm7_default { - function = "PWM7"; - groups = "PWM7"; - }; - - pinctrl_rgmii1_default: rgmii1_default { - function = "RGMII1"; - groups = "RGMII1"; - }; - - pinctrl_rgmii2_default: rgmii2_default { - function = "RGMII2"; - groups = "RGMII2"; - }; - - pinctrl_rmii1_default: rmii1_default { - function = "RMII1"; - groups = "RMII1"; - }; - - pinctrl_rmii2_default: rmii2_default { - function = "RMII2"; - groups = "RMII2"; - }; - - pinctrl_rom16_default: rom16_default { - function = "ROM16"; - groups = "ROM16"; - }; - - pinctrl_rom8_default: rom8_default { - function = "ROM8"; - groups = "ROM8"; - }; - - pinctrl_romcs1_default: romcs1_default { - function = "ROMCS1"; - groups = "ROMCS1"; - }; - - pinctrl_romcs2_default: romcs2_default { - function = "ROMCS2"; - groups = "ROMCS2"; - }; - - pinctrl_romcs3_default: romcs3_default { - function = "ROMCS3"; - groups = "ROMCS3"; - }; - - pinctrl_romcs4_default: romcs4_default { - function = "ROMCS4"; - groups = "ROMCS4"; - }; - - pinctrl_rxd1_default: rxd1_default { - function = "RXD1"; - groups = "RXD1"; - }; - - pinctrl_rxd2_default: rxd2_default { - function = "RXD2"; - groups = "RXD2"; - }; - - pinctrl_rxd3_default: rxd3_default { - function = "RXD3"; - groups = "RXD3"; - }; - - pinctrl_rxd4_default: rxd4_default { - function = "RXD4"; - groups = "RXD4"; - }; - - pinctrl_salt1_default: salt1_default { - function = "SALT1"; - groups = "SALT1"; - }; - - pinctrl_salt2_default: salt2_default { - function = "SALT2"; - groups = "SALT2"; - }; - - pinctrl_salt3_default: salt3_default { - function = "SALT3"; - groups = "SALT3"; - }; - - pinctrl_salt4_default: salt4_default { - function = "SALT4"; - groups = "SALT4"; - }; - - pinctrl_sd1_default: sd1_default { - function = "SD1"; - groups = "SD1"; - }; - - pinctrl_sd2_default: sd2_default { - function = "SD2"; - groups = "SD2"; - }; - - pinctrl_sgpmck_default: sgpmck_default { - function = "SGPMCK"; - groups = "SGPMCK"; - }; - - pinctrl_sgpmi_default: sgpmi_default { - function = "SGPMI"; - groups = "SGPMI"; - }; - - pinctrl_sgpmld_default: sgpmld_default { - function = "SGPMLD"; - groups = "SGPMLD"; - }; - - pinctrl_sgpmo_default: sgpmo_default { - function = "SGPMO"; - groups = "SGPMO"; - }; - - pinctrl_sgpsck_default: sgpsck_default { - function = "SGPSCK"; - groups = "SGPSCK"; - }; - - pinctrl_sgpsi0_default: sgpsi0_default { - function = "SGPSI0"; - groups = "SGPSI0"; - }; - - pinctrl_sgpsi1_default: sgpsi1_default { - function = "SGPSI1"; - groups = "SGPSI1"; - }; - - pinctrl_sgpsld_default: sgpsld_default { - function = "SGPSLD"; - groups = "SGPSLD"; - }; - - pinctrl_sioonctrl_default: sioonctrl_default { - function = "SIOONCTRL"; - groups = "SIOONCTRL"; - }; - - pinctrl_siopbi_default: siopbi_default { - function = "SIOPBI"; - groups = "SIOPBI"; - }; - - pinctrl_siopbo_default: siopbo_default { - function = "SIOPBO"; - groups = "SIOPBO"; - }; - - pinctrl_siopwreq_default: siopwreq_default { - function = "SIOPWREQ"; - groups = "SIOPWREQ"; - }; - - pinctrl_siopwrgd_default: siopwrgd_default { - function = "SIOPWRGD"; - groups = "SIOPWRGD"; - }; - - pinctrl_sios3_default: sios3_default { - function = "SIOS3"; - groups = "SIOS3"; - }; - - pinctrl_sios5_default: sios5_default { - function = "SIOS5"; - groups = "SIOS5"; - }; - - pinctrl_siosci_default: siosci_default { - function = "SIOSCI"; - groups = "SIOSCI"; - }; - - pinctrl_spi1_default: spi1_default { - function = "SPI1"; - groups = "SPI1"; - }; - - pinctrl_spi1debug_default: spi1debug_default { - function = "SPI1DEBUG"; - groups = "SPI1DEBUG"; - }; - - pinctrl_spi1passthru_default: spi1passthru_default { - function = "SPI1PASSTHRU"; - groups = "SPI1PASSTHRU"; - }; - - pinctrl_spics1_default: spics1_default { - function = "SPICS1"; - groups = "SPICS1"; - }; - - pinctrl_timer3_default: timer3_default { - function = "TIMER3"; - groups = "TIMER3"; - }; - - pinctrl_timer4_default: timer4_default { - function = "TIMER4"; - groups = "TIMER4"; - }; - - pinctrl_timer5_default: timer5_default { - function = "TIMER5"; - groups = "TIMER5"; - }; - - pinctrl_timer6_default: timer6_default { - function = "TIMER6"; - groups = "TIMER6"; - }; - - pinctrl_timer7_default: timer7_default { - function = "TIMER7"; - groups = "TIMER7"; - }; - - pinctrl_timer8_default: timer8_default { - function = "TIMER8"; - groups = "TIMER8"; - }; - - pinctrl_txd1_default: txd1_default { - function = "TXD1"; - groups = "TXD1"; - }; - - pinctrl_txd2_default: txd2_default { - function = "TXD2"; - groups = "TXD2"; - }; - - pinctrl_txd3_default: txd3_default { - function = "TXD3"; - groups = "TXD3"; - }; - - pinctrl_txd4_default: txd4_default { - function = "TXD4"; - groups = "TXD4"; - }; - - pinctrl_uart6_default: uart6_default { - function = "UART6"; - groups = "UART6"; - }; - - pinctrl_usbcki_default: usbcki_default { - function = "USBCKI"; - groups = "USBCKI"; - }; - - pinctrl_vgabios_rom_default: vgabios_rom_default { - function = "VGABIOS_ROM"; - groups = "VGABIOS_ROM"; - }; - - pinctrl_vgahs_default: vgahs_default { - function = "VGAHS"; - groups = "VGAHS"; - }; - - pinctrl_vgavs_default: vgavs_default { - function = "VGAVS"; - groups = "VGAVS"; - }; - - pinctrl_vpi18_default: vpi18_default { - function = "VPI18"; - groups = "VPI18"; - }; - - pinctrl_vpi24_default: vpi24_default { - function = "VPI24"; - groups = "VPI24"; - }; - - pinctrl_vpi30_default: vpi30_default { - function = "VPI30"; - groups = "VPI30"; - }; - - pinctrl_vpo12_default: vpo12_default { - function = "VPO12"; - groups = "VPO12"; - }; - - pinctrl_vpo24_default: vpo24_default { - function = "VPO24"; - groups = "VPO24"; - }; - - pinctrl_wdtrst1_default: wdtrst1_default { - function = "WDTRST1"; - groups = "WDTRST1"; - }; - - pinctrl_wdtrst2_default: wdtrst2_default { - function = "WDTRST2"; - groups = "WDTRST2"; - }; - }; }; + adc: adc@1e6e9000 { + compatible = "aspeed,ast2400-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&clk_apb>; + #io-channel-cells = <1>; + status = "disabled"; + }; + sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x8000>; // 32K @@ -895,23 +185,9 @@ clock-names = "PCLK"; }; - wdt1: wdt@1e785000 { - compatible = "aspeed,ast2400-wdt"; - reg = <0x1e785000 0x1c>; - interrupts = <27>; - }; - - wdt2: wdt@1e785020 { - compatible = "aspeed,ast2400-wdt"; - reg = <0x1e785020 0x1c>; - interrupts = <27>; - clocks = <&clk_apb>; - status = "disabled"; - }; - uart1: serial@1e783000 { compatible = "ns16550a"; - reg = <0x1e783000 0x1000>; + reg = <0x1e783000 0x20>; reg-shift = <2>; interrupts = <9>; clocks = <&clk_uart>; @@ -919,64 +195,1046 @@ status = "disabled"; }; - uart2: serial@1e78d000 { + uart5: serial@1e784000 { compatible = "ns16550a"; - reg = <0x1e78d000 0x1000>; + reg = <0x1e784000 0x20>; reg-shift = <2>; - interrupts = <32>; + interrupts = <10>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - uart3: serial@1e78e000 { - compatible = "ns16550a"; - reg = <0x1e78e000 0x1000>; + wdt1: watchdog@1e785000 { + compatible = "aspeed,ast2400-wdt"; + reg = <0x1e785000 0x1c>; + }; + + wdt2: watchdog@1e785020 { + compatible = "aspeed,ast2400-wdt"; + reg = <0x1e785020 0x1c>; + }; + + vuart: serial@1e787000 { + compatible = "aspeed,ast2400-vuart"; + reg = <0x1e787000 0x40>; reg-shift = <2>; - interrupts = <33>; + interrupts = <10>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - uart4: serial@1e78f000 { + uart2: serial@1e78d000 { compatible = "ns16550a"; - reg = <0x1e78f000 0x1000>; + reg = <0x1e78d000 0x20>; reg-shift = <2>; - interrupts = <34>; + interrupts = <32>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - uart5: serial@1e784000 { + uart3: serial@1e78e000 { compatible = "ns16550a"; - reg = <0x1e784000 0x1000>; + reg = <0x1e78e000 0x20>; reg-shift = <2>; - interrupts = <10>; + interrupts = <33>; clocks = <&clk_uart>; - current-speed = <38400>; no-loopback-test; status = "disabled"; }; - uart6: serial@1e787000 { + uart4: serial@1e78f000 { compatible = "ns16550a"; - reg = <0x1e787000 0x1000>; + reg = <0x1e78f000 0x20>; reg-shift = <2>; - interrupts = <10>; + interrupts = <34>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; }; - adc: adc@1e6e9000 { - compatible = "aspeed,ast2400-adc"; - reg = <0x1e6e9000 0xb0>; - clocks = <&clk_apb>; - #io-channel-cells = <1>; - status = "disabled"; + i2c: i2c@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; }; }; }; }; + +&i2c { + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2400-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; + }; + + i2c0: i2c-bus@40 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x40 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; + + i2c1: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x80 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <1>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; + + i2c2: i2c-bus@c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0xc0 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <2>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; + + i2c3: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x100 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <3>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; + + i2c4: i2c-bus@140 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x140 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <4>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; + + i2c5: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x180 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <5>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; + + i2c6: i2c-bus@1c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x1c0 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <6>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; + + i2c7: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x300 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <7>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; + + i2c8: i2c-bus@340 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x340 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <8>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; + + i2c9: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x380 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <9>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; + + i2c10: i2c-bus@3c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x3c0 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <10>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; + + i2c11: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x400 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <11>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; + + i2c12: i2c-bus@440 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x440 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <12>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; + + i2c13: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x480 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <13>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; +}; + +&pinctrl { + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_extrst_default: extrst_default { + function = "EXTRST"; + groups = "EXTRST"; + }; + + pinctrl_flack_default: flack_default { + function = "FLACK"; + groups = "FLACK"; + }; + + pinctrl_flbusy_default: flbusy_default { + function = "FLBUSY"; + groups = "FLBUSY"; + }; + + pinctrl_flwp_default: flwp_default { + function = "FLWP"; + groups = "FLWP"; + }; + + pinctrl_gpid_default: gpid_default { + function = "GPID"; + groups = "GPID"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_ndts4_default: ndts4_default { + function = "NDTS4"; + groups = "NDTS4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rom16_default: rom16_default { + function = "ROM16"; + groups = "ROM16"; + }; + + pinctrl_rom8_default: rom8_default { + function = "ROM8"; + groups = "ROM8"; + }; + + pinctrl_romcs1_default: romcs1_default { + function = "ROMCS1"; + groups = "ROMCS1"; + }; + + pinctrl_romcs2_default: romcs2_default { + function = "ROMCS2"; + groups = "ROMCS2"; + }; + + pinctrl_romcs3_default: romcs3_default { + function = "ROMCS3"; + groups = "ROMCS3"; + }; + + pinctrl_romcs4_default: romcs4_default { + function = "ROMCS4"; + groups = "ROMCS4"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sgpmck_default: sgpmck_default { + function = "SGPMCK"; + groups = "SGPMCK"; + }; + + pinctrl_sgpmi_default: sgpmi_default { + function = "SGPMI"; + groups = "SGPMI"; + }; + + pinctrl_sgpmld_default: sgpmld_default { + function = "SGPMLD"; + groups = "SGPMLD"; + }; + + pinctrl_sgpmo_default: sgpmo_default { + function = "SGPMO"; + groups = "SGPMO"; + }; + + pinctrl_sgpsck_default: sgpsck_default { + function = "SGPSCK"; + groups = "SGPSCK"; + }; + + pinctrl_sgpsi0_default: sgpsi0_default { + function = "SGPSI0"; + groups = "SGPSI0"; + }; + + pinctrl_sgpsi1_default: sgpsi1_default { + function = "SGPSI1"; + groups = "SGPSI1"; + }; + + pinctrl_sgpsld_default: sgpsld_default { + function = "SGPSLD"; + groups = "SGPSLD"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spics1_default: spics1_default { + function = "SPICS1"; + groups = "SPICS1"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabios_rom_default: vgabios_rom_default { + function = "VGABIOS_ROM"; + groups = "VGABIOS_ROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi18_default: vpi18_default { + function = "VPI18"; + groups = "VPI18"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpi30_default: vpi30_default { + function = "VPI30"; + groups = "VPI30"; + }; + + pinctrl_vpo12_default: vpo12_default { + function = "VPO12"; + groups = "VPO12"; + }; + + pinctrl_vpo24_default: vpo24_default { + function = "VPO24"; + groups = "VPO24"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index eab8f549a6fed49351d86b5fa408c03545e19779..5c4ecdba3a6bc2e2d4ed5d669dcc116327e986e0 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -8,6 +8,29 @@ #size-cells = <1>; interrupt-parent = <&vic>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &vuart; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -145,7 +168,7 @@ clock-frequency = <198000000>; }; - clk_apb: clk_apb@08 { + clk_apb: clk_apb@8 { #clock-cells = <0>; compatible = "aspeed,g5-apb-clock", "fixed-clock"; reg = <0x08>; @@ -164,962 +187,1199 @@ compatible = "aspeed,g5-pinctrl"; aspeed,external-nodes = <&gfx &lhc>; - pinctrl_acpi_default: acpi_default { - function = "ACPI"; - groups = "ACPI"; - }; + }; - pinctrl_adc0_default: adc0_default { - function = "ADC0"; - groups = "ADC0"; - }; + }; - pinctrl_adc1_default: adc1_default { - function = "ADC1"; - groups = "ADC1"; - }; + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + }; - pinctrl_adc10_default: adc10_default { - function = "ADC10"; - groups = "ADC10"; - }; + adc: adc@1e6e9000 { + compatible = "aspeed,ast2500-adc"; + reg = <0x1e6e9000 0xb0>; + clocks = <&clk_apb>; + #io-channel-cells = <1>; + status = "disabled"; + }; - pinctrl_adc11_default: adc11_default { - function = "ADC11"; - groups = "ADC11"; - }; + sram@1e720000 { + compatible = "mmio-sram"; + reg = <0x1e720000 0x9000>; // 36K + }; - pinctrl_adc12_default: adc12_default { - function = "ADC12"; - groups = "ADC12"; - }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; - pinctrl_adc13_default: adc13_default { - function = "ADC13"; - groups = "ADC13"; - }; + timer: timer@1e782000 { + /* This timer is a Faraday FTTMR010 derivative */ + compatible = "aspeed,ast2400-timer"; + reg = <0x1e782000 0x90>; + interrupts = <16 17 18 35 36 37 38 39>; + clocks = <&clk_apb>; + clock-names = "PCLK"; + }; - pinctrl_adc14_default: adc14_default { - function = "ADC14"; - groups = "ADC14"; - }; + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x20>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_adc15_default: adc15_default { - function = "ADC15"; - groups = "ADC15"; - }; + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x20>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_adc2_default: adc2_default { - function = "ADC2"; - groups = "ADC2"; - }; + wdt1: watchdog@1e785000 { + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785000 0x20>; + }; - pinctrl_adc3_default: adc3_default { - function = "ADC3"; - groups = "ADC3"; - }; + wdt2: watchdog@1e785020 { + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785020 0x20>; + }; - pinctrl_adc4_default: adc4_default { - function = "ADC4"; - groups = "ADC4"; - }; + wdt3: watchdog@1e785040 { + compatible = "aspeed,ast2500-wdt"; + reg = <0x1e785040 0x20>; + status = "disabled"; + }; - pinctrl_adc5_default: adc5_default { - function = "ADC5"; - groups = "ADC5"; - }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; - pinctrl_adc6_default: adc6_default { - function = "ADC6"; - groups = "ADC6"; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e789000 0x1000>; - pinctrl_adc7_default: adc7_default { - function = "ADC7"; - groups = "ADC7"; - }; + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2500-lpc-bmc"; + reg = <0x0 0x80>; + }; - pinctrl_adc8_default: adc8_default { - function = "ADC8"; - groups = "ADC8"; - }; + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; - pinctrl_adc9_default: adc9_default { - function = "ADC9"; - groups = "ADC9"; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80 0x1e0>; - pinctrl_bmcint_default: bmcint_default { - function = "BMCINT"; - groups = "BMCINT"; - }; + reg-io-width = <4>; - pinctrl_ddcclk_default: ddcclk_default { - function = "DDCCLK"; - groups = "DDCCLK"; + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; }; + }; + }; - pinctrl_ddcdat_default: ddcdat_default { - function = "DDCDAT"; - groups = "DDCDAT"; - }; + vuart: serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_espi_default: espi_default { - function = "ESPI"; - groups = "ESPI"; - }; + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x20>; + reg-shift = <2>; + interrupts = <32>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_fwspics1_default: fwspics1_default { - function = "FWSPICS1"; - groups = "FWSPICS1"; - }; + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x20>; + reg-shift = <2>; + interrupts = <33>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_fwspics2_default: fwspics2_default { - function = "FWSPICS2"; - groups = "FWSPICS2"; - }; + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x20>; + reg-shift = <2>; + interrupts = <34>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; - pinctrl_gpid0_default: gpid0_default { - function = "GPID0"; - groups = "GPID0"; - }; + i2c: i2c@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + }; + }; + }; +}; - pinctrl_gpid2_default: gpid2_default { - function = "GPID2"; - groups = "GPID2"; - }; +&i2c { + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; + }; - pinctrl_gpid4_default: gpid4_default { - function = "GPID4"; - groups = "GPID4"; - }; + i2c0: i2c-bus@40 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x40 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; - pinctrl_gpid6_default: gpid6_default { - function = "GPID6"; - groups = "GPID6"; - }; + i2c1: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x80 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <1>; + interrupt-parent = <&i2c_ic>; + status = "disabled"; + /* Does not need pinctrl properties */ + }; - pinctrl_gpie0_default: gpie0_default { - function = "GPIE0"; - groups = "GPIE0"; - }; + i2c2: i2c-bus@c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0xc0 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <2>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; - pinctrl_gpie2_default: gpie2_default { - function = "GPIE2"; - groups = "GPIE2"; - }; + i2c3: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x100 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <3>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; - pinctrl_gpie4_default: gpie4_default { - function = "GPIE4"; - groups = "GPIE4"; - }; + i2c4: i2c-bus@140 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x140 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <4>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; - pinctrl_gpie6_default: gpie6_default { - function = "GPIE6"; - groups = "GPIE6"; - }; + i2c5: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x180 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <5>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; - pinctrl_i2c10_default: i2c10_default { - function = "I2C10"; - groups = "I2C10"; - }; + i2c6: i2c-bus@1c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x1c0 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <6>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; - pinctrl_i2c11_default: i2c11_default { - function = "I2C11"; - groups = "I2C11"; - }; + i2c7: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x300 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <7>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; - pinctrl_i2c12_default: i2c12_default { - function = "I2C12"; - groups = "I2C12"; - }; + i2c8: i2c-bus@340 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x340 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <8>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; - pinctrl_i2c13_default: i2c13_default { - function = "I2C13"; - groups = "I2C13"; - }; + i2c9: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x380 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <9>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; - pinctrl_i2c14_default: i2c14_default { - function = "I2C14"; - groups = "I2C14"; - }; + i2c10: i2c-bus@3c0 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x3c0 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <10>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; + i2c11: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x400 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <11>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; - pinctrl_i2c4_default: i2c4_default { - function = "I2C4"; - groups = "I2C4"; - }; + i2c12: i2c-bus@440 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x440 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <12>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; - pinctrl_i2c5_default: i2c5_default { - function = "I2C5"; - groups = "I2C5"; - }; + i2c13: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + reg = <0x480 0x40>; + compatible = "aspeed,ast2500-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <13>; + interrupt-parent = <&i2c_ic>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; +}; - pinctrl_i2c6_default: i2c6_default { - function = "I2C6"; - groups = "I2C6"; - }; +&pinctrl { + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; - pinctrl_i2c7_default: i2c7_default { - function = "I2C7"; - groups = "I2C7"; - }; + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; - pinctrl_i2c8_default: i2c8_default { - function = "I2C8"; - groups = "I2C8"; - }; + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; - pinctrl_i2c9_default: i2c9_default { - function = "I2C9"; - groups = "I2C9"; - }; + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; - pinctrl_lad0_default: lad0_default { - function = "LAD0"; - groups = "LAD0"; - }; - pinctrl_lad1_default: lad1_default { - function = "LAD1"; - groups = "LAD1"; - }; + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; - pinctrl_lad2_default: lad2_default { - function = "LAD2"; - groups = "LAD2"; - }; + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; - pinctrl_lad3_default: lad3_default { - function = "LAD3"; - groups = "LAD3"; - }; + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; - pinctrl_lclk_default: lclk_default { - function = "LCLK"; - groups = "LCLK"; - }; + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; - pinctrl_lframe_default: lframe_default { - function = "LFRAME"; - groups = "LFRAME"; - }; + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; - pinctrl_lpchc_default: lpchc_default { - function = "LPCHC"; - groups = "LPCHC"; - }; + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; - pinctrl_lpcpd_default: lpcpd_default { - function = "LPCPD"; - groups = "LPCPD"; - }; + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; - pinctrl_lpcplus_default: lpcplus_default { - function = "LPCPLUS"; - groups = "LPCPLUS"; - }; + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; - pinctrl_lpcpme_default: lpcpme_default { - function = "LPCPME"; - groups = "LPCPME"; - }; + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; - pinctrl_lpcrst_default: lpcrst_default { - function = "LPCRST"; - groups = "LPCRST"; - }; + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; - pinctrl_lpcsmi_default: lpcsmi_default { - function = "LPCSMI"; - groups = "LPCSMI"; - }; + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; - pinctrl_lsirq_default: lsirq_default { - function = "LSIRQ"; - groups = "LSIRQ"; - }; + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; - pinctrl_mac1link_default: mac1link_default { - function = "MAC1LINK"; - groups = "MAC1LINK"; - }; + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; - pinctrl_mac2link_default: mac2link_default { - function = "MAC2LINK"; - groups = "MAC2LINK"; - }; + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; - pinctrl_mdio1_default: mdio1_default { - function = "MDIO1"; - groups = "MDIO1"; - }; + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; - pinctrl_mdio2_default: mdio2_default { - function = "MDIO2"; - groups = "MDIO2"; - }; + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; - pinctrl_ncts1_default: ncts1_default { - function = "NCTS1"; - groups = "NCTS1"; - }; + pinctrl_espi_default: espi_default { + function = "ESPI"; + groups = "ESPI"; + }; - pinctrl_ncts2_default: ncts2_default { - function = "NCTS2"; - groups = "NCTS2"; - }; + pinctrl_fwspics1_default: fwspics1_default { + function = "FWSPICS1"; + groups = "FWSPICS1"; + }; - pinctrl_ncts3_default: ncts3_default { - function = "NCTS3"; - groups = "NCTS3"; - }; + pinctrl_fwspics2_default: fwspics2_default { + function = "FWSPICS2"; + groups = "FWSPICS2"; + }; - pinctrl_ncts4_default: ncts4_default { - function = "NCTS4"; - groups = "NCTS4"; - }; + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; - pinctrl_ndcd1_default: ndcd1_default { - function = "NDCD1"; - groups = "NDCD1"; - }; + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; - pinctrl_ndcd2_default: ndcd2_default { - function = "NDCD2"; - groups = "NDCD2"; - }; + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; - pinctrl_ndcd3_default: ndcd3_default { - function = "NDCD3"; - groups = "NDCD3"; - }; + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; - pinctrl_ndcd4_default: ndcd4_default { - function = "NDCD4"; - groups = "NDCD4"; - }; + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; - pinctrl_ndsr1_default: ndsr1_default { - function = "NDSR1"; - groups = "NDSR1"; - }; + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; - pinctrl_ndsr2_default: ndsr2_default { - function = "NDSR2"; - groups = "NDSR2"; - }; + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; - pinctrl_ndsr3_default: ndsr3_default { - function = "NDSR3"; - groups = "NDSR3"; - }; + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; - pinctrl_ndsr4_default: ndsr4_default { - function = "NDSR4"; - groups = "NDSR4"; - }; + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; - pinctrl_ndtr1_default: ndtr1_default { - function = "NDTR1"; - groups = "NDTR1"; - }; + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; - pinctrl_ndtr2_default: ndtr2_default { - function = "NDTR2"; - groups = "NDTR2"; - }; + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; - pinctrl_ndtr3_default: ndtr3_default { - function = "NDTR3"; - groups = "NDTR3"; - }; + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; - pinctrl_ndtr4_default: ndtr4_default { - function = "NDTR4"; - groups = "NDTR4"; - }; + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; - pinctrl_nri1_default: nri1_default { - function = "NRI1"; - groups = "NRI1"; - }; + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; - pinctrl_nri2_default: nri2_default { - function = "NRI2"; - groups = "NRI2"; - }; + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; - pinctrl_nri3_default: nri3_default { - function = "NRI3"; - groups = "NRI3"; - }; + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; - pinctrl_nri4_default: nri4_default { - function = "NRI4"; - groups = "NRI4"; - }; + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; - pinctrl_nrts1_default: nrts1_default { - function = "NRTS1"; - groups = "NRTS1"; - }; + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; - pinctrl_nrts2_default: nrts2_default { - function = "NRTS2"; - groups = "NRTS2"; - }; + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; - pinctrl_nrts3_default: nrts3_default { - function = "NRTS3"; - groups = "NRTS3"; - }; + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; - pinctrl_nrts4_default: nrts4_default { - function = "NRTS4"; - groups = "NRTS4"; - }; + pinctrl_lad0_default: lad0_default { + function = "LAD0"; + groups = "LAD0"; + }; - pinctrl_oscclk_default: oscclk_default { - function = "OSCCLK"; - groups = "OSCCLK"; - }; + pinctrl_lad1_default: lad1_default { + function = "LAD1"; + groups = "LAD1"; + }; - pinctrl_pewake_default: pewake_default { - function = "PEWAKE"; - groups = "PEWAKE"; - }; + pinctrl_lad2_default: lad2_default { + function = "LAD2"; + groups = "LAD2"; + }; - pinctrl_pnor_default: pnor_default { - function = "PNOR"; - groups = "PNOR"; - }; + pinctrl_lad3_default: lad3_default { + function = "LAD3"; + groups = "LAD3"; + }; - pinctrl_pwm0_default: pwm0_default { - function = "PWM0"; - groups = "PWM0"; - }; + pinctrl_lclk_default: lclk_default { + function = "LCLK"; + groups = "LCLK"; + }; - pinctrl_pwm1_default: pwm1_default { - function = "PWM1"; - groups = "PWM1"; - }; + pinctrl_lframe_default: lframe_default { + function = "LFRAME"; + groups = "LFRAME"; + }; - pinctrl_pwm2_default: pwm2_default { - function = "PWM2"; - groups = "PWM2"; - }; + pinctrl_lpchc_default: lpchc_default { + function = "LPCHC"; + groups = "LPCHC"; + }; - pinctrl_pwm3_default: pwm3_default { - function = "PWM3"; - groups = "PWM3"; - }; + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; - pinctrl_pwm4_default: pwm4_default { - function = "PWM4"; - groups = "PWM4"; - }; + pinctrl_lpcplus_default: lpcplus_default { + function = "LPCPLUS"; + groups = "LPCPLUS"; + }; - pinctrl_pwm5_default: pwm5_default { - function = "PWM5"; - groups = "PWM5"; - }; + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; - pinctrl_pwm6_default: pwm6_default { - function = "PWM6"; - groups = "PWM6"; - }; + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; - pinctrl_pwm7_default: pwm7_default { - function = "PWM7"; - groups = "PWM7"; - }; + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; - pinctrl_rgmii1_default: rgmii1_default { - function = "RGMII1"; - groups = "RGMII1"; - }; + pinctrl_lsirq_default: lsirq_default { + function = "LSIRQ"; + groups = "LSIRQ"; + }; - pinctrl_rgmii2_default: rgmii2_default { - function = "RGMII2"; - groups = "RGMII2"; - }; + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; - pinctrl_rmii1_default: rmii1_default { - function = "RMII1"; - groups = "RMII1"; - }; + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; - pinctrl_rmii2_default: rmii2_default { - function = "RMII2"; - groups = "RMII2"; - }; + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; - pinctrl_rxd1_default: rxd1_default { - function = "RXD1"; - groups = "RXD1"; - }; + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; - pinctrl_rxd2_default: rxd2_default { - function = "RXD2"; - groups = "RXD2"; - }; + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; - pinctrl_rxd3_default: rxd3_default { - function = "RXD3"; - groups = "RXD3"; - }; + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; - pinctrl_rxd4_default: rxd4_default { - function = "RXD4"; - groups = "RXD4"; - }; + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; - pinctrl_salt1_default: salt1_default { - function = "SALT1"; - groups = "SALT1"; - }; + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; - pinctrl_salt10_default: salt10_default { - function = "SALT10"; - groups = "SALT10"; - }; + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; - pinctrl_salt11_default: salt11_default { - function = "SALT11"; - groups = "SALT11"; - }; + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; - pinctrl_salt12_default: salt12_default { - function = "SALT12"; - groups = "SALT12"; - }; + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; - pinctrl_salt13_default: salt13_default { - function = "SALT13"; - groups = "SALT13"; - }; + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; - pinctrl_salt14_default: salt14_default { - function = "SALT14"; - groups = "SALT14"; - }; + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; - pinctrl_salt2_default: salt2_default { - function = "SALT2"; - groups = "SALT2"; - }; + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; - pinctrl_salt3_default: salt3_default { - function = "SALT3"; - groups = "SALT3"; - }; + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; - pinctrl_salt4_default: salt4_default { - function = "SALT4"; - groups = "SALT4"; - }; + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; - pinctrl_salt5_default: salt5_default { - function = "SALT5"; - groups = "SALT5"; - }; + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; - pinctrl_salt6_default: salt6_default { - function = "SALT6"; - groups = "SALT6"; - }; + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; - pinctrl_salt7_default: salt7_default { - function = "SALT7"; - groups = "SALT7"; - }; + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; - pinctrl_salt8_default: salt8_default { - function = "SALT8"; - groups = "SALT8"; - }; + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; - pinctrl_salt9_default: salt9_default { - function = "SALT9"; - groups = "SALT9"; - }; + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; - pinctrl_scl1_default: scl1_default { - function = "SCL1"; - groups = "SCL1"; - }; + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; - pinctrl_scl2_default: scl2_default { - function = "SCL2"; - groups = "SCL2"; - }; + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; - pinctrl_sd1_default: sd1_default { - function = "SD1"; - groups = "SD1"; - }; + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; - pinctrl_sd2_default: sd2_default { - function = "SD2"; - groups = "SD2"; - }; + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; - pinctrl_sda1_default: sda1_default { - function = "SDA1"; - groups = "SDA1"; - }; + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; - pinctrl_sda2_default: sda2_default { - function = "SDA2"; - groups = "SDA2"; - }; + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; - pinctrl_sgps1_default: sgps1_default { - function = "SGPS1"; - groups = "SGPS1"; - }; + pinctrl_nrts4_default: nrts4_default { + function = "NRTS4"; + groups = "NRTS4"; + }; - pinctrl_sgps2_default: sgps2_default { - function = "SGPS2"; - groups = "SGPS2"; - }; + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; - pinctrl_sioonctrl_default: sioonctrl_default { - function = "SIOONCTRL"; - groups = "SIOONCTRL"; - }; + pinctrl_pewake_default: pewake_default { + function = "PEWAKE"; + groups = "PEWAKE"; + }; - pinctrl_siopbi_default: siopbi_default { - function = "SIOPBI"; - groups = "SIOPBI"; - }; + pinctrl_pnor_default: pnor_default { + function = "PNOR"; + groups = "PNOR"; + }; - pinctrl_siopbo_default: siopbo_default { - function = "SIOPBO"; - groups = "SIOPBO"; - }; + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; - pinctrl_siopwreq_default: siopwreq_default { - function = "SIOPWREQ"; - groups = "SIOPWREQ"; - }; + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; - pinctrl_siopwrgd_default: siopwrgd_default { - function = "SIOPWRGD"; - groups = "SIOPWRGD"; - }; + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; - pinctrl_sios3_default: sios3_default { - function = "SIOS3"; - groups = "SIOS3"; - }; + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; - pinctrl_sios5_default: sios5_default { - function = "SIOS5"; - groups = "SIOS5"; - }; + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; - pinctrl_siosci_default: siosci_default { - function = "SIOSCI"; - groups = "SIOSCI"; - }; + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; - pinctrl_spi1_default: spi1_default { - function = "SPI1"; - groups = "SPI1"; - }; + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; - pinctrl_spi1cs1_default: spi1cs1_default { - function = "SPI1CS1"; - groups = "SPI1CS1"; - }; + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; - pinctrl_spi1debug_default: spi1debug_default { - function = "SPI1DEBUG"; - groups = "SPI1DEBUG"; - }; + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; - pinctrl_spi1passthru_default: spi1passthru_default { - function = "SPI1PASSTHRU"; - groups = "SPI1PASSTHRU"; - }; + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; - pinctrl_spi2ck_default: spi2ck_default { - function = "SPI2CK"; - groups = "SPI2CK"; - }; + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; - pinctrl_spi2cs0_default: spi2cs0_default { - function = "SPI2CS0"; - groups = "SPI2CS0"; - }; + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; - pinctrl_spi2cs1_default: spi2cs1_default { - function = "SPI2CS1"; - groups = "SPI2CS1"; - }; + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; - pinctrl_spi2miso_default: spi2miso_default { - function = "SPI2MISO"; - groups = "SPI2MISO"; - }; + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; - pinctrl_spi2mosi_default: spi2mosi_default { - function = "SPI2MOSI"; - groups = "SPI2MOSI"; - }; + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; - pinctrl_timer3_default: timer3_default { - function = "TIMER3"; - groups = "TIMER3"; - }; + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; - pinctrl_timer4_default: timer4_default { - function = "TIMER4"; - groups = "TIMER4"; - }; + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; - pinctrl_timer5_default: timer5_default { - function = "TIMER5"; - groups = "TIMER5"; - }; + pinctrl_salt10_default: salt10_default { + function = "SALT10"; + groups = "SALT10"; + }; - pinctrl_timer6_default: timer6_default { - function = "TIMER6"; - groups = "TIMER6"; - }; + pinctrl_salt11_default: salt11_default { + function = "SALT11"; + groups = "SALT11"; + }; - pinctrl_timer7_default: timer7_default { - function = "TIMER7"; - groups = "TIMER7"; - }; + pinctrl_salt12_default: salt12_default { + function = "SALT12"; + groups = "SALT12"; + }; - pinctrl_timer8_default: timer8_default { - function = "TIMER8"; - groups = "TIMER8"; - }; + pinctrl_salt13_default: salt13_default { + function = "SALT13"; + groups = "SALT13"; + }; - pinctrl_txd1_default: txd1_default { - function = "TXD1"; - groups = "TXD1"; - }; + pinctrl_salt14_default: salt14_default { + function = "SALT14"; + groups = "SALT14"; + }; - pinctrl_txd2_default: txd2_default { - function = "TXD2"; - groups = "TXD2"; - }; + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; - pinctrl_txd3_default: txd3_default { - function = "TXD3"; - groups = "TXD3"; - }; + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; - pinctrl_txd4_default: txd4_default { - function = "TXD4"; - groups = "TXD4"; - }; + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; - pinctrl_uart6_default: uart6_default { - function = "UART6"; - groups = "UART6"; - }; + pinctrl_salt5_default: salt5_default { + function = "SALT5"; + groups = "SALT5"; + }; - pinctrl_usbcki_default: usbcki_default { - function = "USBCKI"; - groups = "USBCKI"; - }; + pinctrl_salt6_default: salt6_default { + function = "SALT6"; + groups = "SALT6"; + }; - pinctrl_vgabiosrom_default: vgabiosrom_default { - function = "VGABIOSROM"; - groups = "VGABIOSROM"; - }; + pinctrl_salt7_default: salt7_default { + function = "SALT7"; + groups = "SALT7"; + }; - pinctrl_vgahs_default: vgahs_default { - function = "VGAHS"; - groups = "VGAHS"; - }; + pinctrl_salt8_default: salt8_default { + function = "SALT8"; + groups = "SALT8"; + }; - pinctrl_vgavs_default: vgavs_default { - function = "VGAVS"; - groups = "VGAVS"; - }; + pinctrl_salt9_default: salt9_default { + function = "SALT9"; + groups = "SALT9"; + }; - pinctrl_vpi24_default: vpi24_default { - function = "VPI24"; - groups = "VPI24"; - }; + pinctrl_scl1_default: scl1_default { + function = "SCL1"; + groups = "SCL1"; + }; - pinctrl_vpo_default: vpo_default { - function = "VPO"; - groups = "VPO"; - }; + pinctrl_scl2_default: scl2_default { + function = "SCL2"; + groups = "SCL2"; + }; - pinctrl_wdtrst1_default: wdtrst1_default { - function = "WDTRST1"; - groups = "WDTRST1"; - }; + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; - pinctrl_wdtrst2_default: wdtrst2_default { - function = "WDTRST2"; - groups = "WDTRST2"; - }; + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; - }; + pinctrl_sda1_default: sda1_default { + function = "SDA1"; + groups = "SDA1"; + }; - }; + pinctrl_sda2_default: sda2_default { + function = "SDA2"; + groups = "SDA2"; + }; - gfx: display@1e6e6000 { - compatible = "aspeed,ast2500-gfx", "syscon"; - reg = <0x1e6e6000 0x1000>; - reg-io-width = <4>; - }; + pinctrl_sgps1_default: sgps1_default { + function = "SGPS1"; + groups = "SGPS1"; + }; - sram@1e720000 { - compatible = "mmio-sram"; - reg = <0x1e720000 0x9000>; // 36K - }; + pinctrl_sgps2_default: sgps2_default { + function = "SGPS2"; + groups = "SGPS2"; + }; - gpio: gpio@1e780000 { - #gpio-cells = <2>; - gpio-controller; - compatible = "aspeed,ast2500-gpio"; - reg = <0x1e780000 0x1000>; - interrupts = <20>; - gpio-ranges = <&pinctrl 0 0 220>; - interrupt-controller; - }; + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; - timer: timer@1e782000 { - /* This timer is a Faraday FTTMR010 derivative */ - compatible = "aspeed,ast2400-timer"; - reg = <0x1e782000 0x90>; - interrupts = <16 17 18 35 36 37 38 39>; - clocks = <&clk_apb>; - clock-names = "PCLK"; - }; + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; - wdt1: wdt@1e785000 { - compatible = "aspeed,ast2500-wdt"; - reg = <0x1e785000 0x20>; - interrupts = <27>; - }; + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; - wdt2: wdt@1e785020 { - compatible = "aspeed,ast2500-wdt"; - reg = <0x1e785020 0x20>; - interrupts = <27>; - status = "disabled"; - }; + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; - wdt3: wdt@1e785040 { - compatible = "aspeed,ast2500-wdt"; - reg = <0x1e785040 0x20>; - status = "disabled"; - }; + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; - uart1: serial@1e783000 { - compatible = "ns16550a"; - reg = <0x1e783000 0x1000>; - reg-shift = <2>; - interrupts = <9>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; - lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1e789000 0x1000>; + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; - reg = <0x0 0x80>; - }; + pinctrl_spi1cs1_default: spi1cs1_default { + function = "SPI1CS1"; + groups = "SPI1CS1"; + }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x80 0x1e0>; + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; - reg-io-width = <4>; + pinctrl_spi2ck_default: spi2ck_default { + function = "SPI2CK"; + groups = "SPI2CK"; + }; - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - }; - }; + pinctrl_spi2cs0_default: spi2cs0_default { + function = "SPI2CS0"; + groups = "SPI2CS0"; + }; - uart2: serial@1e78d000 { - compatible = "ns16550a"; - reg = <0x1e78d000 0x1000>; - reg-shift = <2>; - interrupts = <32>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_spi2cs1_default: spi2cs1_default { + function = "SPI2CS1"; + groups = "SPI2CS1"; + }; - uart3: serial@1e78e000 { - compatible = "ns16550a"; - reg = <0x1e78e000 0x1000>; - reg-shift = <2>; - interrupts = <33>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_spi2miso_default: spi2miso_default { + function = "SPI2MISO"; + groups = "SPI2MISO"; + }; - uart4: serial@1e78f000 { - compatible = "ns16550a"; - reg = <0x1e78f000 0x1000>; - reg-shift = <2>; - interrupts = <34>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_spi2mosi_default: spi2mosi_default { + function = "SPI2MOSI"; + groups = "SPI2MOSI"; + }; - uart5: serial@1e784000 { - compatible = "ns16550a"; - reg = <0x1e784000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - current-speed = <38400>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; - uart6: serial@1e787000 { - compatible = "ns16550a"; - reg = <0x1e787000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; - adc: adc@1e6e9000 { - compatible = "aspeed,ast2500-adc"; - reg = <0x1e6e9000 0xb0>; - clocks = <&clk_apb>; - #io-channel-cells = <1>; - status = "disabled"; - }; - }; + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabiosrom_default: vgabiosrom_default { + function = "VGABIOSROM"; + groups = "VGABIOSROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpo_default: vpo_default { + function = "VPO"; + groups = "VPO"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; }; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index 4da011a7a6986aac7ee3e6188b1038bbe25b2855..1c86537a42a01cce895086b4fea786f61eb9fe0c 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -147,12 +147,12 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts index 21c5b56c92e083cb618b4e05d8a30733b89ee519..f877f3430bcc299b29d2b41ea7a4a40dc426b12f 100644 --- a/arch/arm/boot/dts/at91-ariettag25.dts +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -59,12 +59,12 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index 27ebb0f722fdbd724fe83089b86cae39eed2b5ee..c452654b843a400a1c29292ec5d842c44da6cb79 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -62,7 +62,7 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ @@ -71,7 +71,7 @@ >; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index 4372c0287c1c053b3e505f130bbd2bc66d44615c..ec6c28c521a5b64210b02227a676b04686d1ff8f 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -133,11 +133,11 @@ }; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { status = "okay"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 33238fcb6d0b420430cc6a584b71af98d141c3b1..fe1bc0a59a98b4775f1d6fe84c6f8bf3920f41d9 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -59,12 +59,12 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { num-ports = <1>; status = "okay"; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 60cb084a8d927e40303a377a40fd283d2eb29f45..6d87b4eb6c417e3f7dbe0cdaf91fdbc30fbdc6ac 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -53,19 +53,27 @@ model = "Atmel SAMA5D27 SOM1 EK"; compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + aliases { + serial0 = &uart1; /* DBGU */ + serial1 = &uart4; /* mikro BUS 1 */ + serial2 = &uart2; /* mikro BUS 2 */ + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + chosen { stdout-path = "serial0:115200n8"; }; ahb { - usb0: gadget@00300000 { + usb0: gadget@300000 { atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00400000 { + usb1: ohci@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ &pioA PIN_PA27 GPIO_ACTIVE_HIGH @@ -76,7 +84,7 @@ status = "okay"; }; - usb2: ehci@00500000 { + usb2: ehci@500000 { status = "okay"; }; @@ -128,12 +136,14 @@ }; pwm0: pwm@f802c000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>; + status = "disabled"; /* Conflict with leds. */ }; flx1: flexcom@f8038000 { atmel,flexcom-mode = ; - status = "disabled"; + status = "okay"; i2c2: i2c@600 { compatible = "atmel,sama5d2-i2c"; @@ -147,7 +157,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; atmel,fifo-size = <16>; - status = "disabled"; + status = "okay"; }; }; @@ -165,17 +175,12 @@ status = "okay"; }; - can0: can@f8054000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can0_default>; - }; - uart3: serial@fc008000 { atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; uart4: serial@fc00c000 { @@ -199,7 +204,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; atmel,fifo-size = <32>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; spi2: spi@400 { @@ -211,7 +216,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; atmel,fifo-size = <16>; - status = "disabled"; + status = "disabled"; /* Conflict with isc. */ }; }; @@ -228,7 +233,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <32>; - status = "disabled"; + status = "disabled"; /* Conflict with spi3 and i2c3. */ }; spi3: spi@400 { @@ -240,7 +245,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; atmel,fifo-size = <16>; - status = "okay"; + status = "okay"; /* Conflict with uart6 and i2c3. */ }; i2c3: i2c@600 { @@ -255,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; - status = "disabled"; + status = "disabled"; /* Conflict with uart6 and spi3. */ }; }; @@ -268,12 +273,6 @@ pinctrl@fc038000 { - pinctrl_can0_default: can0_default { - pinmux = , - ; - bias-disable; - }; - pinctrl_can1_default: can1_default { pinmux = , ; @@ -350,7 +349,7 @@ , , ; - bias-pull-up; + bias-disable; }; ck_cd_vddsel { @@ -368,7 +367,7 @@ , , ; - bias-pull-up; + bias-disable; }; conf-ck_cd { @@ -512,6 +511,7 @@ label = "USER"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; @@ -519,7 +519,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; + status = "okay"; /* Conflict with pwm0. */ red { label = "red"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index cbc26001247bea2fabcf186ad784f187810dbc63..56de21de2779ea8e0af901458f46b46ffd77c6e5 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -67,14 +67,14 @@ }; ahb { - usb0: gadget@00300000 { + usb0: gadget@300000 { atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00400000 { + usb1: ohci@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ &pioA PIN_PB10 GPIO_ACTIVE_HIGH @@ -85,7 +85,7 @@ status = "okay"; }; - usb2: ehci@00500000 { + usb2: ehci@500000 { status = "okay"; }; @@ -103,6 +103,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc1_default>; status = "okay"; /* conflict with qspi0 */ + vqmmc-supply = <&vdd_3v3_reg>; + vmmc-supply = <&vdd_3v3_reg>; }; apb { @@ -160,14 +162,6 @@ compatible = "active-semi,act8945a"; reg = <0x5b>; active-semi,vsel-high; - active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; - active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; - active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>; - active-semi,input-voltage-threshold-microvolt = <6600>; - active-semi,precondition-timeout = <40>; - active-semi,total-timeout = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; status = "okay"; regulators { @@ -220,11 +214,28 @@ regulator-always-on; }; }; + + charger { + compatible = "active-semi,act8945a-charger"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; + interrupt-parent = <&pioA>; + interrupts = ; + + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + status = "okay"; + }; }; }; pwm0: pwm@f802c000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm2_default>; + status = "disabled"; /* conflict with leds */ }; flx0: flexcom@f8034000 { @@ -449,7 +460,7 @@ , , ; - bias-pull-up; + bias-disable; }; ck_cd_rstn_vddsel { @@ -468,7 +479,7 @@ , , ; - bias-pull-up; + bias-disable; }; conf-ck_cd { @@ -508,6 +519,11 @@ bias-disable; }; + pinctrl_pwm0_pwm2_default: pwm0_pwm2_default { + pinmux = , + ; + bias-pull-up; + }; }; classd: classd@fc048000 { @@ -536,6 +552,7 @@ label = "PB_USER"; gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; linux,code = <0x104>; + wakeup-source; }; }; @@ -543,7 +560,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led_gpio_default>; - status = "okay"; + status = "okay"; /* conflict with pwm0 */ red { label = "red"; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 3af088d2cba79d29ddfd7984644fe6822ce48906..40879aded68080112eb9848367a31de16e000a85 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -235,14 +235,14 @@ }; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 3 GPIO_ACTIVE_LOW @@ -251,7 +251,7 @@ status = "okay"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index 84be29f38dae005f12eb0c13a1ec90eaf5b5616a..fe05aaa7ac8785cebd149a33116f1ebcd0b36caf 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -21,14 +21,14 @@ }; ahb { - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -37,7 +37,7 @@ status = "okay"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index cf712444b2c2cb37d1b77ef18bf485cca499a727..29ab17a97f9ada1b50242b7921cf40f82ede95bc 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -170,14 +170,14 @@ }; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_HIGH @@ -186,7 +186,7 @@ status = "okay"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index bae5248f126e8f23ed59cdc0df10586b85814dc3..5b7ee92e32a71af7758800f7543f8f787b01dc33 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -216,14 +216,14 @@ }; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ &pioE 11 GPIO_ACTIVE_LOW @@ -232,7 +232,7 @@ status = "okay"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index e0c0b2897a49d4e19d8d6cd43e39f89592a6515c..9f6005708ea880092c308fc197e7028b7d7e9011 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -180,14 +180,14 @@ }; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "disable"; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -196,7 +196,7 @@ status = "disable"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { /* 4G Modem */ status = "okay"; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index f057e0b15a6f5427d5018ea7d0b18555feede78c..da622bf45b4a3a17a07216cc8a28126c0e13dae4 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -66,7 +66,7 @@ }; }; - sram: sram@00200000 { + sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x4000>; }; @@ -938,7 +938,7 @@ status = "disabled"; }; - usb0: ohci@00300000 { + usb0: ohci@300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index f90e1c2d3caa2fc41485ba330bdcd691a379e6be..33192d0cefeeec67fd9785f1e141643f970ec8e7 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -78,7 +78,7 @@ }; }; - usb0: ohci@00300000 { + usb0: ohci@300000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 6582f3cca92920cd9aa0918655f0015c49dfed1a..bc655e7332d6542720f209aa160c390e7fc456a5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -69,7 +69,7 @@ }; }; - sram0: sram@002ff000 { + sram0: sram@2ff000 { compatible = "mmio-sram"; reg = <0x002ff000 0x2000>; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index a05353f961515fdcf3f5aa4ccaabba743d914dab..66876019101da789dc139420ebe4a80ec1541a18 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -60,7 +60,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x28000>; }; @@ -71,7 +71,7 @@ #size-cells = <1>; ranges; - usb0: ohci@00500000 { + usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 157e1493e6eb58e373e699dbc5bd6619b0d05009..960d6940ebf656818e5a2cd4c32757d8f62e99e4 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -32,7 +32,7 @@ }; ahb { - usb0: ohci@00500000 { + usb0: ohci@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index ed4b564f8de5756ef700c04db31d02b240e62238..e54f14d36b6f4c2516561ef83a0aecd224973645 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -62,12 +62,12 @@ }; }; - sram0: sram@00300000 { + sram0: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x14000>; }; - sram1: sram@00500000 { + sram1: sram@500000 { compatible = "mmio-sram"; reg = <0x00500000 0x4000>; }; @@ -1010,7 +1010,7 @@ status = "disabled"; }; - usb0: ohci@00a00000 { + usb0: ohci@a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 10a0925da10e16db6b5668f09ae62f52f6f593d2..5a2e1af793f55aab9f4ddbe0c6843529af596762 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -191,7 +191,7 @@ }; }; - usb0: ohci@00a00000 { + usb0: ohci@a00000 { num-ports = <2>; status = "okay"; atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index f5930161816371128530533b70ff298fa64cfb0a..90705ee6008b20418826ae1a9c752525e8b3b4f4 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -16,11 +16,11 @@ reg = <0x20000000 0x08000000>; }; - sram0: sram@002ff000 { + sram0: sram@2ff000 { status = "disabled"; }; - sram1: sram@002fc000 { + sram1: sram@2fc000 { compatible = "mmio-sram"; reg = <0x002fc000 0x8000>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 64fa3f9a39d3353ea18eb806a62b2498045a4d81..2b127ca7aaa0a3f2feef3d962ebb634d6051d1b5 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -74,7 +74,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; }; @@ -1313,7 +1313,7 @@ status = "disabled"; }; - usb0: ohci@00700000 { + usb0: ohci@700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1322,7 +1322,7 @@ status = "disabled"; }; - usb1: ehci@00800000 { + usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 94c52c555f832d69cab669b64204f614fd00bced..e922552a04cb45b5841a4a9e9bf01f92fd8020d0 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -290,14 +290,14 @@ }; }; - usb0: ohci@00700000 { + usb0: ohci@700000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW &pioD 3 GPIO_ACTIVE_LOW>; }; - usb1: ehci@00800000 { + usb1: ehci@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 06516d02d351b50e5f4474930b15a3df2111a146..e0ac824e0785bbdfca5ade320cf6cd2607c41c72 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -64,7 +64,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; }; @@ -1018,7 +1018,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 5bea8c59b1154313d0fdf72f8244314ae4dea733..212562aedf5ebb53ebec31c7dd3d63b7cb5f5392 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -169,7 +169,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <1>; atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 7768342a663857e91dc90be762bffcf262ba23f4..52f0e9ef8f67e5e83a5f1e4e9ce71e4943cdb5ee 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -70,7 +70,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; }; @@ -81,7 +81,7 @@ #size-cells = <1>; ranges; - fb0: fb@00500000 { + fb0: fb@500000 { compatible = "atmel,at91sam9rl-lcdc"; reg = <0x00500000 0x1000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 9047c168298a7423ae09de0cb1c03b768e7a22d6..ea6ed98960c911bc9b47c170c7d07e77718d8c81 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -32,7 +32,7 @@ }; ahb { - fb0: fb@00500000 { + fb0: fb@500000 { display = <&display0>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 494864836e837aa87de0b7d7f8fe46844cd788e7..f705a3165656de0b8058a56d7bad1bb02de19d83 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -16,6 +16,10 @@ ahb { apb { + can1: can@f8004000 { + status = "okay"; + }; + macb0: ethernet@f802c000 { phy-mode = "rmii"; status = "okay"; @@ -25,6 +29,12 @@ phy-mode = "rmii"; status = "okay"; }; + + pwm0: pwm@f8034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1>; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 57f307541d2ea4f5e892b776648f5793aacbd6ec..ad779a7dfefd62aa1971698301618141f8cd37d8 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -72,7 +72,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x8000>; }; @@ -1231,7 +1231,7 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1240,7 +1240,7 @@ status = "disabled"; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 9d2bbc41a7b0812d2460da3688090a58bd1f1b9d..4a2e13c8bf00470442e95ad864945ad6ac0afff9 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -50,6 +50,8 @@ }; usart0: serial@f801c000 { + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; @@ -134,7 +136,7 @@ }; }; - usb0: ohci@00600000 { + usb0: ohci@600000 { status = "okay"; num-ports = <3>; atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ @@ -143,7 +145,7 @@ >; }; - usb1: ehci@00700000 { + usb1: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi index 0278f63b2daf8796379998675797cf1b172da5cd..1304452f0fae0eb8887591357263c1a61a3f6979 100644 --- a/arch/arm/boot/dts/at91sam9xe.dtsi +++ b/arch/arm/boot/dts/at91sam9xe.dtsi @@ -49,11 +49,11 @@ model = "Atmel AT91SAM9XE family SoC"; compatible = "atmel,at91sam9xe", "atmel,at91sam9260"; - sram0: sram@002ff000 { + sram0: sram@2ff000 { status = "disabled"; }; - sram1: sram@00300000 { + sram1: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x4000>; }; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 3c8fa26e87b70c71d0bdb3e10d8b9f3219c1f130..897103e0a79bf3b4be99d8b8f2a8a48bb0b22672 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -107,7 +107,7 @@ }; }; - usb_power_supply: usb_power_supply { + usb_power_supply: usb-power-supply { compatible = "x-powers,axp202-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..73b761f850c54ca3e5acb02b2414659550f54c93 --- /dev/null +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -0,0 +1,139 @@ +/* + * Copyright 2017 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* AXP813/818 Integrated Power Management Chip */ + +&axp81x { + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <3000>; + + reg_dcdc1: dcdc1 { + }; + + reg_dcdc2: dcdc2 { + }; + + reg_dcdc3: dcdc3 { + }; + + reg_dcdc4: dcdc4 { + }; + + reg_dcdc5: dcdc5 { + }; + + reg_dcdc6: dcdc6 { + }; + + reg_dcdc7: dcdc7 { + }; + + reg_aldo1: aldo1 { + }; + + reg_aldo2: aldo2 { + }; + + reg_aldo3: aldo3 { + }; + + reg_dldo1: dldo1 { + }; + + reg_dldo2: dldo2 { + }; + + reg_dldo3: dldo3 { + }; + + reg_dldo4: dldo4 { + }; + + reg_eldo1: eldo1 { + }; + + reg_eldo2: eldo2 { + }; + + reg_eldo3: eldo3 { + }; + + reg_fldo1: fldo1 { + }; + + reg_fldo2: fldo2 { + }; + + reg_fldo3: fldo3 { + }; + + reg_ldo_io0: ldo-io0 { + /* Disable by default to avoid conflicts with GPIO */ + status = "disabled"; + }; + + reg_ldo_io1: ldo-io1 { + /* Disable by default to avoid conflicts with GPIO */ + status = "disabled"; + }; + + reg_rtc_ldo: rtc-ldo { + /* RTC_LDO is a fixed, always-on regulator */ + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_sw: sw { + }; + + reg_drivevbus: drivevbus { + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 7c957ea06c66ce6b603277e452584dc8df05e5ef..699fdf94d139bdffea5b28fbc4bab912895583f2 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -96,14 +96,14 @@ #address-cells = <1>; #size-cells = <1>; - otp: otp@0301c800 { + otp: otp@301c800 { compatible = "brcm,ocotp"; reg = <0x0301c800 0x2c>; brcm,ocotp-size = <2048>; status = "disabled"; }; - pcie_phy: phy@0301d0a0 { + pcie_phy: phy@301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; #address-cells = <1>; @@ -120,7 +120,7 @@ }; }; - pinctrl: pinctrl@0301d0c8 { + pinctrl: pinctrl@301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x30>, <0x0301d24c 0x2c>; @@ -141,7 +141,7 @@ }; }; - mailbox: mailbox@03024024 { + mailbox: mailbox@3024024 { compatible = "brcm,iproc-mailbox"; reg = <0x03024024 0x40>; interrupts = ; @@ -150,7 +150,7 @@ #mbox-cells = <1>; }; - gpio_crmu: gpio@03024800 { + gpio_crmu: gpio@3024800 { compatible = "brcm,cygnus-crmu-gpio"; reg = <0x03024800 0x50>, <0x03024008 0x18>; @@ -473,6 +473,16 @@ status = "disabled"; }; + clcd: clcd@180a0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x180a0000 0x1000>; + interrupts = ; + interrupt-names = "combined"; + clocks = <&axi41_clk>, <&apb_clk>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + v3d: v3d@180a2000 { compatible = "brcm,cygnus-v3d"; reg = <0x180a2000 0x1000>; @@ -575,6 +585,14 @@ status = "disabled"; }; + pwm: pwm@180aa500 { + compatible = "brcm,kona-pwm"; + reg = <0x180aa500 0xc4>; + #pwm-cells = <3>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; + status = "disabled"; + }; + keypad: keypad@180ac000 { compatible = "brcm,bcm-keypad"; reg = <0x180ac000 0x14c>; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..3f9cedd8011f0c22fb05b6a50d1705fc5ceab05d --- /dev/null +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -0,0 +1,368 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include + +/ { + compatible = "brcm,hr2"; + model = "Broadcom Hurricane 2 SoC"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = ; + interrupt-affinity = <&cpu0>; + }; + + mpcore@19000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x00023000>; + #address-cells = <1>; + #size-cells = <1>; + + a9pll: arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,hr2-armpll"; + clocks = <&osc>; + reg = <0x0 0x1000>; + }; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = ; + clocks = <&periph_clk>; + }; + + twd-timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x20>; + interrupts = ; + clocks = <&periph_clk>; + }; + + twd-watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = ; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: l2-cache@22000 { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; + }; + }; + + axi@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x0011c40c>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupts = ; + clocks = <&osc>; + status = "disabled"; + }; + + uart1: serial@400 { + compatible = "ns16550a"; + reg = <0x0400 0x100>; + interrupts = ; + clocks = <&osc>; + status = "disabled"; + }; + + dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = , + , + , + , + , + , + , + , + ; + #dma-cells = <1>; + status = "disabled"; + }; + + amac0: ethernet@22000 { + compatible = "brcm,nsp-amac"; + reg = <0x22000 0x1000>, + <0x110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = ; + status = "disabled"; + }; + + nand: nand@26000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x26000 0x600>, + <0x11b408 0x600>, + <0x026f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = ; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + gpiob: gpio@30000 { + compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + interrupts = ; + }; + + pwm: pwm@31000 { + compatible = "brcm,iproc-pwm"; + reg = <0x31000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + + qspi: qspi@27200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + reg = <0x027200 0x184>, + <0x027000 0x124>, + <0x11c408 0x004>, + <0x0273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + /* partitions defined in board DTS */ + }; + + ccbtimer0: timer@34000 { + compatible = "arm,sp804"; + reg = <0x34000 0x1000>; + interrupts = , + ; + }; + + ccbtimer1: timer@35000 { + compatible = "arm,sp804"; + reg = <0x35000 0x1000>; + interrupts = , + ; + }; + + i2c0: i2c@38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + }; + + watchdog@39000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x39000 0x1000>; + interrupts = ; + }; + + i2c1: i2c@3b000 { + compatible = "brcm,iproc-i2c"; + reg = <0x3b000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + }; + }; + + pflash: nor@20000000 { + compatible = "cfi-flash", "jedec-flash"; + reg = <0x20000000 0x04000000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + + /* partitions defined in board DTS */ + }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi-controller { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + brcm,pcie-msi-inten; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi-controller { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + brcm,pcie-msi-inten; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index dff66974feeda575c06f38c38ddff3e4ecdf41ce..528b9e3bc1da146fd188b4e2c93ec75b7abb4fdd 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -75,7 +75,7 @@ #address-cells = <1>; #size-cells = <1>; - a9pll: arm_clk@00000 { + a9pll: arm_clk@0 { #clock-cells = <0>; compatible = "brcm,nsp-armpll"; clocks = <&osc>; @@ -164,7 +164,7 @@ #address-cells = <1>; #size-cells = <1>; - gpioa: gpio@0020 { + gpioa: gpio@20 { compatible = "brcm,nsp-gpio-a"; reg = <0x0020 0x70>, <0x3f1c4 0x1c>; @@ -176,7 +176,7 @@ gpio-ranges = <&pinctrl 0 0 32>; }; - uart0: serial@0300 { + uart0: serial@300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupts = ; @@ -184,7 +184,7 @@ status = "disabled"; }; - uart1: serial@0400 { + uart1: serial@400 { compatible = "ns16550a"; reg = <0x0400 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index eb1a28da57e3122c0f650af5a3e26f34f12e0ab4..a8844d033b3fed7d20855d20ba4f403f81d02fc9 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -30,6 +30,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; }; /* uart1 is mapped to the pin header */ diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index c544ab302012078633e2940aab2e1e922c910166..ba1c19b1b3eb60962d951a3449d3e6560bac092a 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -57,7 +57,8 @@ usb { label = "bcm53xx:green:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; status { diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts new file mode 100644 index 0000000000000000000000000000000000000000..ecd22a2467465c0a8db19a8847e9518d22316f1a --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul ABR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts new file mode 100644 index 0000000000000000000000000000000000000000..15ffb1abc4409183677a92fcc0a1e096d43e2ee2 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XBR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts new file mode 100644 index 0000000000000000000000000000000000000000..74c83b0ca54e0c1937fe446ae487c0b4a6661ead --- /dev/null +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573"; + model = "Luxul XAP-1440 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "bcm53xx:blue:wlan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts new file mode 100644 index 0000000000000000000000000000000000000000..214df18f3a754c5c088126df547854d88c479952 --- /dev/null +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -0,0 +1,87 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573"; + model = "Luxul XAP-810 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + pcie0_leds { + compatible = "gpio-leds"; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + pcie0_chipcommon: chipcommon@0 { + reg = <0 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 045b9bb857f9a030491bc3bdbf82ae67bb841b73..9a076c409f4ed35fcf5fbe79807ede6e7e8466d5 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -24,7 +24,7 @@ #address-cells = <1>; #size-cells = <1>; - uart0: serial@0300 { + uart0: serial@300 { compatible = "ns16550"; reg = <0x0300 0x100>; interrupts = ; @@ -32,7 +32,7 @@ status = "disabled"; }; - uart1: serial@0400 { + uart1: serial@400 { compatible = "ns16550"; reg = <0x0400 0x100>; interrupts = ; @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <1>; - a9pll: arm_clk@00000 { + a9pll: arm_clk@0 { #clock-cells = <0>; compatible = "brcm,nsp-armpll"; clocks = <&osc>; diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts new file mode 100644 index 0000000000000000000000000000000000000000..431cda514230cf026cdc28063df385de645a0203 --- /dev/null +++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts @@ -0,0 +1,85 @@ +/* + * DTS for Unifi Switch 8 port + * + * Copyright (C) 2017 Florian Fainelli + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm-hr2.dtsi" + +/ { + compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2"; + model = "Ubiquiti UniFi Switch 8 (BCM53342)"; + + /* Hurricane 2 designs use the second UART */ + chosen { + bootargs = "console=ttyS1,115200 earlyprintk"; + }; + + memory@0 { + reg = <0x00000000 0x08000000>, + <0x68000000 0x08000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + + flash: m25p80@0 { + compatible = "m25p80"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12500000>; + spi-cpol; + spi-cpha; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x10000>; + }; + + partition@d0000 { + label = "shmoo"; + reg = <0xd0000 0x10000>; + }; + + partition@e0000 { + label = "kernel0"; + reg = <0xe0000 0xf00000>; + }; + + partition@fe0000 { + label = "kernel1"; + reg = <0xfe0000 0xf10000>; + }; + + partition@1ef0000 { + label = "cfg"; + reg = <0x1ef0000 0x100000>; + }; + + partition@1ff0000 { + label = "EEPROM"; + reg = <0x1ff0000 0x10000>; + }; + }; +}; + +&pcie0 { + /* Attaches to the internal switch */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index c698a565b8ae9e2134c36fc796e983159b686a67..16007d72c346ab76d48c4c73d356a353af0e4133 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -107,7 +107,7 @@ gpio-controller; #gpio-cells = <2>; - uart0: serial@0300 { + uart0: serial@300 { compatible = "ns16550a"; reg = <0x0300 0x100>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 425c48971abecf267f146c8671a4843e204fcd07..d575823c57507b003ec938a848a28562d717a4be 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -202,7 +202,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -220,7 +220,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -238,7 +238,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 4fe1574d08c3ab9b36c938074f772215e9c99416..501c59d97eae4b8360563c38d82abf4120b7a9dd 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -182,7 +182,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -200,7 +200,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -218,7 +218,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index e548229697fc5cecf29da93dc322184e2e67e4c0..bf3a6c9a1d347b6244a7910f0b2159c61348c308 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -234,7 +234,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -252,7 +252,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -270,7 +270,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index a0f0916156e66d83949716c4b571184695fbef3b..eed89e659143a878c9a62159c52c834340c3a61b 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -26,6 +26,19 @@ reg = <0xc0000000 0x08000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsp_memory_region: dsp-memory@c3000000 { + compatible = "shared-dma-pool"; + reg = <0xc3000000 0x1000000>; + reusable; + status = "okay"; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 LCDK"; @@ -319,3 +332,8 @@ pinctrl-0 = <&vpif_capture_pins>; status = "okay"; }; + +&dsp { + memory-region = <&dsp_memory_region>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index af68ef7b0caadee75e8d8fc9bffee1153ed355b9..c66cf78953639db3ed025e4997beb6ef77719064 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -23,6 +23,18 @@ reg = <0xfffee000 0x2000>; }; }; + dsp: dsp@11800000 { + compatible = "ti,da850-dsp"; + reg = <0x11800000 0x40000>, + <0x11e00000 0x8000>, + <0x11f00000 0x8000>, + <0x01c14044 0x4>, + <0x01c14174 0x8>; + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; + interrupt-parent = <&intc>; + interrupts = <28>; + status = "disabled"; + }; soc@1c00000 { compatible = "simple-bus"; model = "da850"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index f4a07bb7c3a29ec69b63edba91b2d9f4c948e21f..4a0a5115b298436dc76180bc74f1d1372d3163a5 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -457,25 +457,25 @@ }; }; - thermal: thermal-diode@001c { + thermal: thermal-diode@1c { compatible = "marvell,dove-thermal"; reg = <0x001c 0x0c>, <0x005c 0x08>; }; - gate_clk: clock-gating-ctrl@0038 { + gate_clk: clock-gating-ctrl@38 { compatible = "marvell,dove-gating-clock"; reg = <0x0038 0x4>; clocks = <&core_clk 0>; #clock-cells = <1>; }; - divider_clk: core-clock@0064 { + divider_clk: core-clock@64 { compatible = "marvell,dove-divider-clock"; reg = <0x0064 0x8>; #clock-cells = <1>; }; - pinctrl: pin-ctrl@0200 { + pinctrl: pin-ctrl@200 { compatible = "marvell,dove-pinctrl"; reg = <0x0200 0x14>, <0x0440 0x04>; @@ -719,13 +719,13 @@ }; }; - core_clk: core-clocks@0214 { + core_clk: core-clocks@214 { compatible = "marvell,dove-core-clock"; reg = <0x0214 0x4>; #clock-cells = <1>; }; - gpio0: gpio-ctrl@0400 { + gpio0: gpio-ctrl@400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; @@ -737,7 +737,7 @@ interrupts = <12>, <13>, <14>, <60>; }; - gpio1: gpio-ctrl@0420 { + gpio1: gpio-ctrl@420 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 343e95f9a00144203b30e4e0beceee5e8bbbbbc7..e088bb93636a6b648f04ffc3836d63ada9e4c97c 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -256,3 +256,7 @@ status = "okay"; }; }; + +&pcie1_rc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index aa426dabb6c349d9f1b5a4a0173ae30ad3b7cc58..ef9c90daa74b82dd0de2abb885a09fc8396e65fa 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -497,7 +497,3 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; - -&pcie1_rc { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 02a136a4661aa1ed172e4926a7a8dabad9e271b9..ac9216293b7c74283351f67c05f76bb59dbd52e0 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -170,7 +170,7 @@ pbias_mmc_reg: pbias_mmc_omap5 { regulator-name = "pbias_mmc_omap5"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; }; }; @@ -457,6 +457,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + ti,hwmods = "dma_system"; }; edma: edma@43300000 { @@ -1069,6 +1070,13 @@ max-frequency = <192000000>; }; + hdqw1w: 1w@480b2000 { + compatible = "ti,omap3-1w"; + reg = <0x480b2000 0x1000>; + interrupts = ; + ti,hwmods = "hdq1w"; + }; + mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; @@ -1489,6 +1497,32 @@ }; }; + target-module@4a0dd000 { + compatible = "ti,sysc-omap4-sr"; + ti,hwmods = "smartreflex_core"; + reg = <0x4a0dd000 0x4>, + <0x4a0dd008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0dd000 0x001000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + + target-module@4a0d9000 { + compatible = "ti,sysc-omap4-sr"; + ti,hwmods = "smartreflex_mpu"; + reg = <0x4a0d9000 0x4>, + <0x4a0d9008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0d9000 0x001000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + omap_dwc3_1: omap_dwc3_1@48880000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss1"; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts index 9a134ed271eb7e8d796925ae20f61b912927481d..bc9d5b69745298bab449c3a829edd25332dcd607 100644 --- a/arch/arm/boot/dts/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -75,7 +75,7 @@ }; &bus { - flash: nor@00000000 { + flash: nor@0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 639c2e605f3c99a4c5478b85c4ac69c236f8bfba..152e0291d0da0a53ba3fe362ed352ed86ab195e6 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -29,7 +29,7 @@ reg = <0x40000000 0x1ff00000>; }; - firmware@0205f000 { + firmware@205f000 { compatible = "samsung,secure-firmware"; reg = <0x0205f000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index bbdfcbc6e7d29a5cdbb854ba030f1d77cae048ad..029eb18590cf7a700e96bbad68f405aa0616987d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -32,7 +32,7 @@ reg = <0x40000000 0x1ff00000>; }; - firmware@0205F000 { + firmware@205f000 { compatible = "samsung,secure-firmware"; reg = <0x0205F000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 0b45467d77a8f53d5b21ce910cadfd2d1226565e..3743df4de390f3f8c2de1185b858d3ebf18bb977 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -32,7 +32,7 @@ reg = <0x40000000 0x1ff00000>; }; - firmware@0205F000 { + firmware@205f000 { compatible = "samsung,secure-firmware"; reg = <0x0205F000 0x1000>; }; @@ -227,28 +227,6 @@ vci-supply = <&ldo20_reg>; reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - power-on-delay= <30>; - power-off-delay= <120>; - reset-delay = <5>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <29>; - panel-height-mm = <29>; - - display-timings { - timing-0 { - clock-frequency = <4600000>; - hactive = <320>; - vactive = <320>; - hfront-porch = <1>; - hback-porch = <1>; - hsync-len = <1>; - vfront-porch = <150>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 590ee442d0ae1bde4ebe2e067f968cf54c2348d5..2bd3872221a1f627bce8f3b7a1bcba4a9b9962f1 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -122,7 +122,7 @@ }; }; - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 5739389f5bb877ef7b29455a1bcd47328d7223ed..4768b086ed677caae2fae52e960774894e016811 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -55,7 +55,7 @@ serial3 = &serial_3; }; - clock_audss: clock-controller@03810000 { + clock_audss: clock-controller@3810000 { compatible = "samsung,exynos4210-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; @@ -64,7 +64,7 @@ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; clocks = <&clock_audss EXYNOS_I2S_BUS>, diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index f280954b260ad440783b3d24f453365e1628458f..82c32d4d83d86d5d0f612ea31b7734111c7e4818 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -843,7 +843,7 @@ }; }; - pinctrl@03860000 { + pinctrl@3860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 0c89ea99de545dd63ba132295758101089eab15b..acd2b2286ccb7d33aaf9d98656cc976162e8acef 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -31,7 +31,7 @@ stdout-path = &serial_2; }; - sysram@02020000 { + sysram@2020000 { smp-sysram@0 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 768fb075b1fd1b520b17f908e7797267200a1bde..03dd61f6480955e657ea3b53e043c2fa4735770b 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -64,7 +64,7 @@ }; }; - sysram: sysram@02020000 { + sysram: sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; #address-cells = <1>; @@ -151,7 +151,7 @@ }; }; - pinctrl_2: pinctrl@03860000 { + pinctrl_2: pinctrl@3860000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x03860000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 14ce2c69bc0b4972d4cb4817fcfaaca0b8b953d4..bda49b232f7bb56d367bf8f150e594c4c0d0efc3 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -26,7 +26,7 @@ reg = <0x40000000 0x40000000>; }; - firmware@0203F000 { + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 102acd78be15a9a972a2334cb520021424045ba0..a21be71000c1b1996271901b1497be2e0307b69a 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -20,7 +20,7 @@ stdout-path = &serial_1; }; - firmware@0204F000 { + firmware@204f000 { compatible = "samsung,secure-firmware"; reg = <0x0204F000 0x1000>; }; @@ -31,8 +31,6 @@ pinctrl-0 = <&gpio_power_key>; power_key { - interrupt-parent = <&gpx1>; - interrupts = <3 IRQ_TYPE_NONE>; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = ; label = "power key"; @@ -253,7 +251,7 @@ samsung,i2c-max-bus-freq = <400000>; status = "okay"; - usb3503: usb3503@08 { + usb3503: usb3503@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -263,7 +261,7 @@ initial-mode = <1>; }; - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 97882267ef093ded9a513e728ee097fdcd0efcbf..acf48a018e5ec20227907c618ebb1db892dadfd4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -43,8 +43,6 @@ pinctrl-0 = <&gpio_power_key &gpio_home_key>; home_key { - interrupt-parent = <&gpx2>; - interrupts = <2 IRQ_TYPE_NONE>; gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = ; label = "home key"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8a89eb893d644d46ad79d7f3e7161edb2d0eccf0..b0b5ec7903a53e91ac6f235d3167b0bbb6846b90 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -32,7 +32,7 @@ stdout-path = &serial_2; }; - firmware@0203F000 { + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index 1d27c28564e4dbce4f2eb27b79137765530bd7b3..4eebd4721a5f505e1f563467cef78115d93e8844 100644 --- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -899,7 +899,7 @@ }; }; - pinctrl_2: pinctrl@03860000 { + pinctrl_2: pinctrl@3860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index bceb919ac6379ad8d5034913b32ecdfd436a7030..220cdf109405463d5f643efa4310a865e49fa25c 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -18,6 +18,7 @@ #include #include #include +#include / { model = "Samsung Trats 2 based on Exynos4412"; @@ -40,7 +41,7 @@ stdout-path = &serial_2; }; - firmware@0204F000 { + firmware@204f000 { compatible = "samsung,secure-firmware"; reg = <0x0204F000 0x1000>; }; @@ -97,6 +98,34 @@ gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vsil12: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "VSIL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&buck7_reg>; + }; + + vcc33mhl: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3.3_MHL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc18mhl: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8_MHL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; gpio-keys { @@ -206,7 +235,7 @@ #size-cells = <0>; status = "okay"; - ak8975@0c { + ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; @@ -229,6 +258,36 @@ }; }; + i2c-mhl { + compatible = "i2c-gpio"; + gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_mhl_bus>; + pinctrl-names = "default"; + status = "okay"; + + sii9234: hdmi-bridge@39 { + compatible = "sil,sii9234"; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x39>; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; + }; + camera: camera { pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; @@ -501,6 +560,29 @@ status = "okay"; }; +&hdmi { + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&i2c_5>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; @@ -579,6 +661,10 @@ }; }; +&i2c_5 { + status = "okay"; +}; + &i2c_7 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -587,7 +673,7 @@ pinctrl-names = "default"; status = "okay"; - max77686: max77686_pmic@09 { + max77686: max77686_pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; @@ -873,12 +959,20 @@ }; }; +&i2c_8 { + status = "okay"; +}; + &i2s0 { pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; }; +&mixer { + status = "okay"; +}; + &mshc_0 { broken-cd; non-removable; @@ -904,6 +998,18 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep0>; + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = ; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + sleep0: sleep-states { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); @@ -1007,6 +1113,11 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep1>; + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = ; + }; + sleep1: sleep-states { PIN_SLP(gpk0-0, PREV, NONE); PIN_SLP(gpk0-1, PREV, NONE); diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 7ff03a7e8fb93e9cfcdeb89c1bd39e85e12f5bd8..b255ac55b1c1ea11c375f64723eb3dc1a1a8ccd4 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -150,7 +150,7 @@ }; }; - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 18a7f396ac5f727b4daa0c15b2723b3ca89035d2..0efd678b8251933c7555871cc810596d0112b3cc 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -152,6 +152,8 @@ }; &hdmi { + status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; @@ -455,15 +457,9 @@ &i2c_2 { status = "okay"; - + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -489,15 +485,9 @@ &i2c_8 { status = "okay"; - + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x38>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2c_9 { @@ -516,6 +506,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 062cba4c2c310b28846634d354b10fe4d07e786c..1e3f9627766cd2a26ace998f76d9cb13fcb669fb 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -116,6 +116,8 @@ }; &hdmi { + status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; @@ -129,7 +131,7 @@ reg = <0x50>; }; - max77686@09 { + max77686@9 { compatible = "maxim,max77686"; reg = <0x09>; interrupt-parent = <&gpx3>; @@ -308,24 +310,16 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2c_9 { @@ -344,6 +338,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 8788880e459d3e1dde6bfddbe80ae3c631693d89..2e7175d2b1b86736762325687e3dde3b590ca1b5 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -261,10 +261,10 @@ }; &hdmi { + status = "okay"; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; ddc = <&i2c_2>; hdmi-en-supply = <&tps65090_fet7>; vdd-supply = <&ldo8_reg>; @@ -281,7 +281,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686: max77686@09 { + max77686: max77686@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; @@ -450,13 +450,9 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -514,19 +510,19 @@ &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2s0 { status = "okay"; }; +&mixer { + status = "okay"; +}; + /* eMMC flash */ &mmc_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index d53bfcbeb39c42f3789514953f152413418d0d49..47dbc50546c104d8fc9e8e8c15201409b50a0913 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -91,10 +91,10 @@ }; &hdmi { + status = "okay"; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; ddc = <&i2c_2>; hdmi-en-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; @@ -362,13 +362,9 @@ &i2c_2 { status = "okay"; + /* used by HDMI DDC */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; }; &i2c_3 { @@ -412,19 +408,19 @@ &i2c_8 { status = "okay"; + /* used by HDMI PHY */ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; }; &i2s0 { status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 8dbeb873e99ca8bac4badd0532c75d14699337b6..5286084e103283dd7f5d17fe74973420bee8f010 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -93,7 +93,7 @@ }; soc: soc { - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x30000>; #address-cells = <1>; @@ -219,7 +219,7 @@ interrupts = ; }; - pinctrl_3: pinctrl@03860000 { + pinctrl_3: pinctrl@3860000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x03860000 0x1000>; interrupts = ; @@ -367,6 +367,11 @@ clocks = <&clock CLK_I2C_HDMI>; clock-names = "i2c"; status = "disabled"; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; }; i2c_9: i2c@121D0000 { @@ -475,7 +480,7 @@ status = "disabled"; }; - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; status = "disabled"; reg = <0x03830000 0x100>; @@ -637,7 +642,7 @@ }; gsc_0: gsc@13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -647,7 +652,7 @@ }; gsc_1: gsc@13e10000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -657,7 +662,7 @@ }; gsc_2: gsc@13e20000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -667,7 +672,7 @@ }; gsc_3: gsc@13e30000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = ; power-domains = <&pd_gsc>; @@ -687,6 +692,8 @@ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; samsung,syscon-phandle = <&pmu_system_controller>; + phy = <&hdmiphy>; + status = "disabled"; }; hdmicec: cec@101B0000 { @@ -702,7 +709,7 @@ status = "disabled"; }; - mixer@14450000 { + mixer: mixer@14450000 { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; power-domains = <&pd_disp1>; @@ -711,6 +718,7 @@ <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; iommus = <&sysmmu_tv>; + status = "disabled"; }; dp_phy: video-phy { diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index c4de1353e5dfe6616a06f5a596a9a30929dd0022..a45eaae33f8f9ca756840eaadfbdf15503f44a9b 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -54,7 +54,7 @@ #clock-cells = <0>; }; - firmware@02073000 { + firmware@2073000 { compatible = "samsung,secure-firmware"; reg = <0x02073000 0x1000>; }; @@ -164,7 +164,7 @@ samsung,i2c-max-bus-freq = <400000>; status = "okay"; - usb3503: usb-hub@08 { + usb3503: usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -178,7 +178,7 @@ refclk-frequency = <24000000>; }; - max77802: pmic@09 { + max77802: pmic@9 { compatible = "maxim,max77802"; reg = <0x9>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 9cb7726ef8d0dbc1f4bb6964acc64bc34abd566e..25f21e9e7d587b3c8fce954ff39b9aa44e9d5ef0 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -32,7 +32,7 @@ #clock-cells = <0>; }; - firmware@02037000 { + firmware@2037000 { compatible = "samsung,secure-firmware"; reg = <0x02037000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 7eab4bc07cec6cde6b645823040ea708d1936dad..06713ec86f0dad73586e553eb900d284393110ca 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -187,7 +187,7 @@ interrupts = ; }; - pinctrl_3: pinctrl@03860000 { + pinctrl_3: pinctrl@3860000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x03860000 0x1000>; interrupts = ; @@ -223,7 +223,7 @@ }; }; - audi2s0: i2s@03830000 { + audi2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index ee1bb9b8b36681aa95f67b0bc02a23e40b35ec05..bc78575d8a4de483be3f948c961088529eec9734 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -30,7 +30,7 @@ bootargs = "console=ttySAC3,115200"; }; - firmware@02073000 { + firmware@2073000 { compatible = "samsung,secure-firmware"; reg = <0x02073000 0x1000>; }; @@ -360,6 +360,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index 5c052d7ff55460d2a965c5ed55e20e475ed1b24c..d7d703aa1699ded9804162b2ed1b089fd625acec 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -36,6 +36,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu1: cpu@1 { @@ -48,6 +49,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -60,6 +62,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu3: cpu@3 { @@ -72,6 +75,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu4: cpu@100 { @@ -85,6 +89,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu5: cpu@101 { @@ -97,6 +102,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu6: cpu@102 { @@ -109,6 +115,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu7: cpu@103 { @@ -121,6 +128,7 @@ cooling-min-level = <0>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 683a4cfb4a23d469ba91670f414e27ea03d57f5a..38af8769711c28a571c09314f3040601de6e2e92 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -696,6 +696,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + /* eMMC flash */ &mmc_0 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 08c8ab173e871fdbea71bbea7207998dbe780daa..310d8637ce9f400c8ff2d89f0ce59d40030f9d17 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -130,6 +130,7 @@ &hdmi { status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -347,12 +348,12 @@ &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + /* used by HDMI DDC */ status = "okay"; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; +&mixer { + status = "okay"; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 02d2f898efa6cbe1041f102de9b3445999a6bea3..8aa2cc7aa125f5513a8333d84f8caae7a67fd3e6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -352,7 +352,7 @@ interrupts = ; }; - pinctrl_4: pinctrl@03860000 { + pinctrl_4: pinctrl@3860000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x03860000 0x1000>; interrupts = ; @@ -365,7 +365,7 @@ interrupt-parent = <&gic>; ranges; - adma: adma@03880000 { + adma: adma@3880000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x03880000 0x1000>; interrupts = ; @@ -429,7 +429,7 @@ }; }; - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; dmas = <&adma 0 @@ -646,6 +646,7 @@ clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; iommus = <&sysmmu_tv>; + status = "disabled"; }; rotator: rotator@11C00000 { @@ -658,7 +659,7 @@ }; gsc_0: video-scaler@13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = ; clocks = <&clock CLK_GSCL0>; @@ -668,7 +669,7 @@ }; gsc_1: video-scaler@13e10000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = ; clocks = <&clock CLK_GSCL1>; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index bf3c6f1ec4ee3c48b9a01a2b31ce97a87d67a00b..ec01d8020c2da99a1096514a93bbaadea14a03af 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -35,6 +35,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu1: cpu@101 { @@ -47,6 +48,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu2: cpu@102 { @@ -59,6 +61,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu3: cpu@103 { @@ -71,6 +74,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu4: cpu@0 { @@ -84,6 +88,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu5: cpu@1 { @@ -96,6 +101,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu6: cpu@2 { @@ -108,6 +114,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu7: cpu@3 { @@ -120,6 +127,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a5b8d0f0877e728cafc0b931e0637084659dd3fd --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -0,0 +1,443 @@ +/* + * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source + * + * Copyright (c) 2017 Marek Szyprowski + * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include "exynos5800.dtsi" +#include "exynos5422-cpus.dtsi" + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x7EA00000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; +}; + +&bus_wcore { + devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, + <&nocp_mem1_0>, <&nocp_mem1_1>; + vdd-supply = <&buck3_reg>; + exynos,saturation-ratio = <100>; + status = "okay"; +}; + +&bus_noc { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys_apb { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_fsys2 { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_gen { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_g2d { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_g2d_acp { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_jpeg { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_jpeg_apb { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_disp1_fimd { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_disp1 { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_gscl_scaler { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&bus_mscl { + devfreq = <&bus_wcore>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&buck6_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + samsung,s2mps11-acokb-ground; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vddq_mmc0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vddq_mmc2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "vdd_emmc_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; +}; + +&nocp_mem0_0 { + status = "okay"; +}; + +&nocp_mem0_1 { + status = "okay"; +}; + +&nocp_mem1_0 { + status = "okay"; +}; + +&nocp_mem1_1 { + status = "okay"; +}; + +&pinctrl_0 { + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; +}; + +&tmu_cpu0 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo7_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo7_reg>; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +/* usbdrd_dwc3_1 mode customized in each board */ + +&usbdrd3_0 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; + +&usbdrd3_1 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts new file mode 100644 index 0000000000000000000000000000000000000000..fb8e8ae776e9bd62b1ea6a2fc87312a67cc3caf1 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -0,0 +1,213 @@ +/* + * Hardkernel Odroid HC1 board device tree source + * + * Copyright (c) 2017 Marek Szyprowski + * Copyright (c) 2017 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroid-core.dtsi" + +/ { + model = "Hardkernel Odroid HC1"; + compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \ + "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; + trips { + cpu0_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu0_alert1: cpu-alert-1 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu0_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* + * When reaching cpu0_alert0, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1600 MHz and 1100 MHz. + */ + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu4 0 2>; + }; + /* + * When reaching cpu0_alert1, reduce CPU + * further, down to 600 MHz (12 steps for big, + * 7 steps for LITTLE). + */ + map2 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1 0>; + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2 0>; + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3 0>; + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu0 0 2>; + }; + map1 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu4 0 2>; + }; + map2 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu0 3 7>; + }; + map3 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + }; + +}; + +&pwm { + /* + * PWM 2 -- Blue LED + */ + pinctrl-0 = <&pwm2_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <2>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index c0b85981c6bf741dadd6d9fd6e91ddd79e808c2f..da3141a307d5ea1dd3ab576b726d1ef5227bb48b 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -11,6 +11,8 @@ * published by the Free Software Foundation. */ +#include + / { sound: sound { compatible = "simple-audio-card"; @@ -43,6 +45,17 @@ }; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FIN_PLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <19200000>; +}; + &hsi2c_5 { status = "okay"; max98090: max98090@10 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index a183b56283f8ff9e9d41d616edfc00a82d200267..445c6c5a13001610f11f03f24a2a2d19bc969ed9 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -12,32 +12,28 @@ * published by the Free Software Foundation. */ -#include -#include -#include -#include -#include "exynos5800.dtsi" -#include "exynos5422-cpus.dtsi" +#include +#include "exynos5422-odroid-core.dtsi" / { - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x7EA00000>; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - firmware@02073000 { - compatible = "samsung,secure-firmware"; - reg = <0x02073000 0x1000>; - }; - - fixed-rate-clocks { - oscclk { - compatible = "samsung,exynos5420-oscclk"; - clock-frequency = <24000000>; + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key>; + + power_key { + /* + * The power button (SW2) is connected to the PWRON + * pin (active high) of the S2MPS11 PMIC, which acts + * as a 16ms debouce filter and signal inverter with + * output on ONOB pin (active low). ONOB PMIC pin is + * then connected to XEINT3 SoC pin. + */ + gpios = <&gpx0 3 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "power key"; + debounce-interval = <0>; + wakeup-source; }; }; @@ -63,22 +59,22 @@ polling-delay-passive = <250>; polling-delay = <0>; trips { - cpu_alert0: cpu-alert-0 { + cpu0_alert0: cpu-alert-0 { temperature = <50000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_alert1: cpu-alert-1 { + cpu0_alert1: cpu-alert-1 { temperature = <60000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_alert2: cpu-alert-2 { + cpu0_alert2: cpu-alert-2 { temperature = <70000>; /* millicelsius */ hysteresis = <5000>; /* millicelsius */ type = "active"; }; - cpu_crit0: cpu-crit-0 { + cpu0_crit0: cpu-crit-0 { temperature = <120000>; /* millicelsius */ hysteresis = <0>; /* millicelsius */ type = "critical"; @@ -87,59 +83,258 @@ * Exynos542x supports only 4 trip-points * so for these polling mode is required. * Start polling at temperature level of last - * interrupt-driven trip: cpu_alert2 + * interrupt-driven trip: cpu0_alert2 */ - cpu_alert3: cpu-alert-3 { + cpu0_alert3: cpu-alert-3 { temperature = <70000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ type = "passive"; }; - cpu_alert4: cpu-alert-4 { + cpu0_alert4: cpu-alert-4 { temperature = <85000>; /* millicelsius */ hysteresis = <10000>; /* millicelsius */ type = "passive"; }; - }; cooling-maps { map0 { - trip = <&cpu_alert0>; + trip = <&cpu0_alert0>; cooling-device = <&fan0 0 1>; }; map1 { - trip = <&cpu_alert1>; + trip = <&cpu0_alert1>; cooling-device = <&fan0 1 2>; }; map2 { - trip = <&cpu_alert2>; + trip = <&cpu0_alert2>; cooling-device = <&fan0 2 3>; }; /* - * When reaching cpu_alert3, reduce CPU + * When reaching cpu0_alert3, reduce CPU * by 2 steps. On Exynos5422/5800 that would * be: 1600 MHz and 1100 MHz. */ map3 { - trip = <&cpu_alert3>; + trip = <&cpu0_alert3>; cooling-device = <&cpu0 0 2>; }; map4 { - trip = <&cpu_alert3>; + trip = <&cpu0_alert3>; cooling-device = <&cpu4 0 2>; }; - /* - * When reaching cpu_alert4, reduce CPU - * further, down to 600 MHz (11 steps for big, + * When reaching cpu0_alert4, reduce CPU + * further, down to 600 MHz (12 steps for big, * 7 steps for LITTLE). */ map5 { - trip = <&cpu_alert4>; + trip = <&cpu0_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu0_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu1_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu1_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu1_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu1_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu1_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu1_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu1_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu2_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu2_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu2_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu2_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu2_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu2_alert4>; cooling-device = <&cpu0 3 7>; }; map6 { - trip = <&cpu_alert4>; - cooling-device = <&cpu4 3 11>; + trip = <&cpu2_alert4>; + cooling-device = <&cpu4 3 12>; + }; + }; + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu3_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu3_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu3_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu3_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu3_alert3>; + cooling-device = <&cpu4 0 2>; + }; + map5 { + trip = <&cpu3_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu3_alert4>; + cooling-device = <&cpu4 3 12>; }; }; }; @@ -151,110 +346,9 @@ status = "okay"; }; -&bus_wcore { - devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, - <&nocp_mem1_0>, <&nocp_mem1_1>; - vdd-supply = <&buck3_reg>; - exynos,saturation-ratio = <100>; - status = "okay"; -}; - -&bus_noc { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys_apb { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_fsys2 { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_gen { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_peri { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_g2d { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_g2d_acp { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_jpeg { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_jpeg_apb { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_disp1_fimd { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_disp1 { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_gscl_scaler { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&bus_mscl { - devfreq = <&bus_wcore>; - status = "okay"; -}; - -&clock_audss { - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FIN_PLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <19200000>; -}; - -&cpu0 { - cpu-supply = <&buck6_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - &hdmi { status = "okay"; + ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -269,246 +363,15 @@ needs-hpd; }; -&hsi2c_4 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - samsung,s2mps11-acokb-ground; - - interrupt-parent = <&gpx0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&s2mps11_irq>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_ldo1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "vddq_mmc0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo4_reg: LDO4 { - regulator-name = "vdd_adc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "vdd_ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "vdd_ldo6"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "vdd_ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "vdd_ldo8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "vdd_ldo9"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "vdd_ldo10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "vddq_mmc2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo18_reg: LDO18 { - regulator-name = "vdd_emmc_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo26_reg: LDO26 { - regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_mem"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd_kfc"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "vdd_2.8v_ldo"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3750000>; - regulator-always-on; - regulator-boot-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_vmem"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + /* used by HDMI DDC */ status = "okay"; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; +&mixer { + status = "okay"; }; &mmc_0 { @@ -530,48 +393,18 @@ vqmmc-supply = <&ldo3_reg>; }; -&mmc_2 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; - cap-sd-highspeed; - vmmc-supply = <&ldo19_reg>; - vqmmc-supply = <&ldo13_reg>; -}; - -&nocp_mem0_0 { - status = "okay"; -}; - -&nocp_mem0_1 { - status = "okay"; -}; - -&nocp_mem1_0 { - status = "okay"; -}; - -&nocp_mem1_1 { - status = "okay"; -}; - &pinctrl_0 { - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; + power_key: power-key { + samsung,pins = "gpx0-3"; samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-pud = ; samsung,pin-drv = ; }; - s2mps11_irq: s2mps11-irq { - samsung,pins = "gpx0-4"; - samsung,pin-function = ; - samsung,pin-pud = ; + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; samsung,pin-drv = ; }; }; @@ -584,45 +417,3 @@ samsung,pin-drv = ; }; }; - -&tmu_cpu0 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu1 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu2 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_cpu3 { - vtmu-supply = <&ldo7_reg>; -}; - -&tmu_gpu { - vtmu-supply = <&ldo7_reg>; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -/* usbdrd_dwc3_1 mode customized in each board */ - -&usbdrd3_0 { - vdd33-supply = <&ldo9_reg>; - vdd10-supply = <&ldo11_reg>; -}; - -&usbdrd3_1 { - vdd33-supply = <&ldo9_reg>; - vdd10-supply = <&ldo11_reg>; -}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 92bd2c6f76316171718d1d3f4fb63b9daa9be4d1..7eafad333bdb2fda8e5fb0f2bca5d3c2b32b6fdf 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -56,7 +56,7 @@ samsung,spi-feedback-delay = <0>; }; - partition@00000 { + partition@0 { label = "BootLoader"; reg = <0x60000 0x80000>; read-only; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 7a00be7ea6d716e38bf979a6d9e4da7397f7dfd1..9c3c75ae5e48813ad5b43ac57b054e0ce4a797b8 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -196,7 +196,7 @@ clock-names = "watchdog"; }; - gmac: ethernet@00230000 { + gmac: ethernet@230000 { compatible = "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x00230000 0x8000>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 0389e8a10d0bd353744e176360c4485fffdcd759..a5007f182bc4a1106340ddba33be64d22d3e8041 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -29,7 +29,7 @@ }; soc: soc { - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; @@ -134,6 +134,7 @@ interrupts = ; phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u3_susphy_quirk; }; }; @@ -154,6 +155,7 @@ reg = <0x12400000 0x10000>; phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u3_susphy_quirk; }; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 8613944ea5c5e5e7301889bff99c989ac68fd580..6a9fdc0760f0ea8c7ad502cd70dc009d49b58a59 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -50,7 +50,7 @@ reg = <0x0 0x7c0000>; }; - root@07c0000 { + root@7c0000 { label = "root"; reg = <0x7c0000 0x7840000>; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index b9b07d0895cfaef1ba465cc4b12542bd89660ad1..cb5c925bd59729310530002d5df5bfae35d0f718 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -142,6 +142,12 @@ groups = "idegrp"; }; }; + tvc_default_pins: pinctrl-tvc { + mux { + function = "tvc"; + groups = "tvcgrp"; + }; + }; }; }; @@ -348,5 +354,20 @@ memcpy-bus-width = <32>; #dma-cells = <2>; }; + + display-controller@6a000000 { + compatible = "cortina,gemini-tvc", "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + pinctrl-names = "default"; + pinctrl-0 = <&tvc_default_pins>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 9d5fd5cfefa668d068adfd13ea720bc7267e4844..f7cf4f53e764dc41d908dad12d0675e5911c18bf 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -91,14 +91,14 @@ reboot-offset = <0x4>; }; - global_timer@0a000200 { + global_timer@a000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x0a000200 0x100>; interrupts = <1 11 0xf04>; clocks = <&hisi_refclk144mhz>; }; - local_timer@0a000600 { + local_timer@a000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x0a000600 0x100>; interrupts = <1 13 0xf04>; diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index 40a9e33c2654e3ab694d742328d2d8d4becfefff..ca48641d0f48d69f914cc56901fe7b7b864f966d 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -18,7 +18,7 @@ model = "Hisilicon D01 Development Board"; compatible = "hisilicon,hip04-d01"; - memory@00000000,10000000 { + memory@0,10000000 { device_type = "memory"; reg = <0x00000000 0x10000000 0x00000000 0xc0000000>, <0x00000004 0xc0000000 0x00000003 0x40000000>; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 6c712a97e1fef042b00c8fe55d406e78285b973e..50d3f8426da17dc3b36dc85c196aefcb9176f6c3 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -39,7 +39,7 @@ compatible = "simple-bus"; ranges; - timer0: timer@00002000 { + timer0: timer@2000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00002000 0x1000>; /* timer00 & timer01 */ @@ -48,7 +48,7 @@ status = "disabled"; }; - timer1: timer@00a29000 { + timer1: timer@a29000 { /* * Only used in NORMAL state, not available ins * SLOW or DOZE state. @@ -62,7 +62,7 @@ status = "disabled"; }; - timer2: timer@00a2a000 { + timer2: timer@a2a000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00a2a000 0x1000>; /* timer20 & timer21 */ @@ -71,7 +71,7 @@ status = "disabled"; }; - timer3: timer@00a2b000 { + timer3: timer@a2b000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00a2b000 0x1000>; /* timer30 & timer31 */ @@ -80,7 +80,7 @@ status = "disabled"; }; - timer4: timer@00a81000 { + timer4: timer@a81000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00a81000 0x1000>; /* timer30 & timer31 */ @@ -89,7 +89,7 @@ status = "disabled"; }; - uart0: uart@00b00000 { + uart0: uart@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b00000 0x1000>; interrupts = <0 49 4>; @@ -98,7 +98,7 @@ status = "disabled"; }; - uart1: uart@00006000 { + uart1: uart@6000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00006000 0x1000>; interrupts = <0 50 4>; @@ -107,7 +107,7 @@ status = "disabled"; }; - uart2: uart@00b02000 { + uart2: uart@b02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b02000 0x1000>; interrupts = <0 51 4>; @@ -116,7 +116,7 @@ status = "disabled"; }; - uart3: uart@00b03000 { + uart3: uart@b03000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x00b03000 0x1000>; interrupts = <0 52 4>; @@ -125,7 +125,7 @@ status = "disabled"; }; - uart4: uart@00b04000 { + uart4: uart@b04000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 53 4>; @@ -199,7 +199,7 @@ status = "disabled"; }; - gpio5: gpio@004000 { + gpio5: gpio@4000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x004000 0x1000>; interrupts = <0 113 0x4>; @@ -378,7 +378,7 @@ }; }; - local_timer@00a00600 { + local_timer@a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; @@ -392,7 +392,7 @@ cache-level = <2>; }; - sysctrl: system-controller@00000000 { + sysctrl: system-controller@0 { compatible = "hisilicon,sysctrl", "syscon"; reg = <0x00000000 0x1000>; }; @@ -404,7 +404,7 @@ mask = <0xdeadbeef>; }; - cpuctrl@00a22000 { + cpuctrl@a22000 { compatible = "hisilicon,cpuctrl"; #address-cells = <1>; #size-cells = <1>; @@ -489,7 +489,7 @@ clocks = <&clock HIX5HD2_SATA_CLK>; }; - ir: ir@001000 { + ir: ir@1000 { compatible = "hisilicon,hix5hd2-ir"; reg = <0x001000 0x1000>; interrupts = <0 47 4>; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index 38d712be5685a8eeb989f64125a634df1ed8a339..20f6565c337d700a13fcf6071c4c236e4563f280 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -40,7 +40,7 @@ spi1 = &cspi2; }; - aitc: aitc-interrupt-controller@00223000 { + aitc: aitc-interrupt-controller@223000 { compatible = "fsl,imx1-aitc", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; @@ -69,14 +69,14 @@ interrupt-parent = <&aitc>; ranges; - aipi@00200000 { + aipi@200000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x00200000 0x10000>; ranges; - gpt1: timer@00202000 { + gpt1: timer@202000 { compatible = "fsl,imx1-gpt"; reg = <0x00202000 0x1000>; interrupts = <59>; @@ -85,7 +85,7 @@ clock-names = "ipg", "per"; }; - gpt2: timer@00203000 { + gpt2: timer@203000 { compatible = "fsl,imx1-gpt"; reg = <0x00203000 0x1000>; interrupts = <58>; @@ -94,7 +94,7 @@ clock-names = "ipg", "per"; }; - fb: fb@00205000 { + fb: fb@205000 { compatible = "fsl,imx1-fb"; reg = <0x00205000 0x1000>; interrupts = <14>; @@ -105,7 +105,7 @@ status = "disabled"; }; - uart1: serial@00206000 { + uart1: serial@206000 { compatible = "fsl,imx1-uart"; reg = <0x00206000 0x1000>; interrupts = <30 29 26>; @@ -115,7 +115,7 @@ status = "disabled"; }; - uart2: serial@00207000 { + uart2: serial@207000 { compatible = "fsl,imx1-uart"; reg = <0x00207000 0x1000>; interrupts = <24 23 20>; @@ -125,7 +125,7 @@ status = "disabled"; }; - pwm: pwm@00208000 { + pwm: pwm@208000 { #pwm-cells = <2>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; @@ -135,7 +135,7 @@ clock-names = "ipg", "per"; }; - dma: dma@00209000 { + dma: dma@209000 { compatible = "fsl,imx1-dma"; reg = <0x00209000 0x1000>; interrupts = <61 60>; @@ -145,7 +145,7 @@ #dma-cells = <1>; }; - uart3: serial@0020a000 { + uart3: serial@20a000 { compatible = "fsl,imx1-uart"; reg = <0x0020a000 0x1000>; interrupts = <54 4 1>; @@ -156,14 +156,14 @@ }; }; - aipi@00210000 { + aipi@210000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x00210000 0x10000>; ranges; - cspi1: cspi@00213000 { + cspi1: cspi@213000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; @@ -175,7 +175,7 @@ status = "disabled"; }; - i2c: i2c@00217000 { + i2c: i2c@217000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-i2c"; @@ -185,7 +185,7 @@ status = "disabled"; }; - cspi2: cspi@00219000 { + cspi2: cspi@219000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; @@ -197,20 +197,20 @@ status = "disabled"; }; - clks: ccm@0021b000 { + clks: ccm@21b000 { compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; #clock-cells = <1>; }; - iomuxc: iomuxc@0021c000 { + iomuxc: iomuxc@21c000 { compatible = "fsl,imx1-iomuxc"; reg = <0x0021c000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges; - gpio1: gpio@0021c000 { + gpio1: gpio@21c000 { compatible = "fsl,imx1-gpio"; reg = <0x0021c000 0x100>; interrupts = <11>; @@ -220,7 +220,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio@0021c100 { + gpio2: gpio@21c100 { compatible = "fsl,imx1-gpio"; reg = <0x0021c100 0x100>; interrupts = <12>; @@ -230,7 +230,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio@0021c200 { + gpio3: gpio@21c200 { compatible = "fsl,imx1-gpio"; reg = <0x0021c200 0x100>; interrupts = <13>; @@ -240,7 +240,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio@0021c300 { + gpio4: gpio@21c300 { compatible = "fsl,imx1-gpio"; reg = <0x0021c300 0x100>; interrupts = <62>; @@ -252,7 +252,7 @@ }; }; - weim: weim@00220000 { + weim: weim@220000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx1-weim"; @@ -269,7 +269,7 @@ status = "disabled"; }; - esram: esram@00300000 { + esram: esram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index db39bd6b8e0062ae1cae8b97b743a7ebc577f759..0f053721d80f20790ecf189c766621bdfda19d64 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -64,7 +64,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 20>; + cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index c52692821fb14beb23408e2297288fd77b751a44..2d15ce72d006a63b4ee2be4ef65c72c0e0861f15 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -135,7 +135,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 129>; @@ -295,6 +295,14 @@ status = "okay"; }; +&tsc { + status = "okay"; +}; + +&tscadc { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index d2a91976e67f69ad5aed3307ac08d8e3295fff03..ae078341fb6038561776218e99eda5d66974e40f 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -143,7 +143,7 @@ pinctrl-0 = <&i2c0_pins_a>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 581e85f4fd4c11ffb05eb5c73b75f1fa6a7ba96b..49ab40838e694d15bd821aa410a813c5553384c6 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -148,7 +148,7 @@ pinctrl-0 = <&i2c0_pins_a>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 5309bb90d7d586cbadfc6b61777761595b5d35c8..7f5b80402c545bacf6ea6903e2fae96a591ec27f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -194,7 +194,7 @@ pinctrl-0 = <&i2c0_pins_a>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index dbfb8aab505f76e986e301aab30632b7df43a20a..22aa025cab1ecda2caf6c892fb4c9d2e5332a180 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -137,7 +137,7 @@ }; i2c0: i2c@80058000 { - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 0ebbc83852d026fbdd9684424b62a7a9d10720ea..152621ea37db840c35231c440df434e8156eda63 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,13 +1,43 @@ /* * Copyright 2012 Shawn Guo - * Copyright 2013 Lothar Waßmann + * Copyright 2013-2017 Lothar Waßmann * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -45,82 +75,69 @@ status = "disabled"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb0_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_2p5v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - reg_3p3v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_can_xcvr: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&tx28_flexcan_xcvr_pins>; - }; + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_flexcan_xcvr_pins>; + }; - reg_lcd: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LCD POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_lcd: regulator-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "LCD POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_lcd_reset: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "LCD RESET"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; - startup-delay-us = <300000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - }; + reg_lcd_reset: regulator-lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "LCD RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; }; clocks { @@ -298,7 +315,7 @@ clock-frequency = <400000>; status = "okay"; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_2p5v>; @@ -312,7 +329,7 @@ pinctrl-names = "default"; pinctrl-0 = <&tx28_pca9554_pins>; interrupt-parent = <&gpio3>; - interrupts = <28 0>; + interrupts = <28 IRQ_TYPE_NONE>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -336,7 +353,7 @@ pinctrl-names = "default"; pinctrl-0 = <&tx28_tsc2007_pins>; interrupt-parent = <&gpio3>; - interrupts = <20 0>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <660>; }; @@ -344,6 +361,8 @@ ds1339: rtc@68 { compatible = "mxim,ds1339"; reg = <0x68>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index e9357131b026e33140d3928cd284ef976d0278be..ae98d67590747adf8eae32a57cc018e73c4bfdd6 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -65,7 +65,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio3 24>; + cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 3747d80104f4530226638a9051e18ba14f457701..35955e63d6c56d1781e6b41548df09a040067039 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -52,7 +52,7 @@ }; }; - tzic: tz-interrupt-controller@0fffc000 { + tzic: tz-interrupt-controller@fffc000 { compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic"; interrupt-controller; #interrupt-cells = <1>; @@ -443,6 +443,7 @@ clocks = <&clks IMX5_CLK_SDMA_GATE>, <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; + #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index a5e6091c8729968beef3bd4279c325a3212a5ca8..3e1846a64d937f13e5a161cb80be3f43cab31052 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -16,7 +16,7 @@ model = "Armadeus Systems APF51Dev docking/development board"; compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; - backlight@bl1{ + backlight { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; compatible = "gpio-backlight"; @@ -24,7 +24,7 @@ default-on; }; - display@di1 { + disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; @@ -51,7 +51,7 @@ port { display_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; + remote-endpoint = <&ipu_di0_disp1>; }; }; }; @@ -120,7 +120,7 @@ pinctrl-0 = <&pinctrl_hog>; imx51-apf51dev { - pinctrl_backlight: bl1grp { + pinctrl_backlight: backlightgrp { fsl,pins = < MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5 >; @@ -218,6 +218,6 @@ }; }; -&ipu_di0_disp0 { +&ipu_di0_disp1 { remote-endpoint = <&display_in>; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 873cf242679c0d1cbc9a84938105abfada2c9610..2a694c5cc8aebcfa2813305d02a357d4ddd7fb63 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -39,7 +39,7 @@ }; }; - display0: display@di0 { + display1: disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; @@ -61,12 +61,12 @@ port { display0_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; + remote-endpoint = <&ipu_di0_disp1>; }; }; }; - display1: display@di1 { + display2: disp2 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb565"; pinctrl-names = "default"; @@ -93,7 +93,7 @@ port { display1_in: endpoint { - remote-endpoint = <&ipu_di1_disp1>; + remote-endpoint = <&ipu_di1_disp2>; }; }; }; @@ -337,7 +337,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_clkcodec>; @@ -348,11 +348,11 @@ }; }; -&ipu_di0_disp0 { +&ipu_di0_disp1 { remote-endpoint = <&display0_in>; }; -&ipu_di1_disp1 { +&ipu_di1_disp2 { remote-endpoint = <&display1_in>; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index ca1cc5eca80fb1cd6a0b32b85fdee9374f2792b3..564233e974129eb6433a11e1086d86676c6ca5d4 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -50,7 +50,7 @@ power-supply = <&backlight_reg>; }; - display0: display@di0 { + display1: disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; @@ -71,9 +71,9 @@ }; }; - port@0 { + port { display0_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; + remote-endpoint = <&ipu_di0_disp1>; }; }; }; @@ -107,7 +107,7 @@ }; }; -&ipu_di0_disp0 { +&ipu_di0_disp1 { remote-endpoint = <&display0_in>; }; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts new file mode 100644 index 0000000000000000000000000000000000000000..49be0e1c812d21628920931f2c69579d37828908 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -0,0 +1,834 @@ +/* + * Copyright (C) 2017 Zodiac Inflight Innovations + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx51.dtsi" +#include + +/ { + model = "ZII RDU1 Board"; + compatible = "zii,imx51-rdu1", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + aliases { + mdio-gpio0 = &mdio_gpio; + rtc0 = &ds1341; + }; + + clk_26M_osc: 26M_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clk_26M_osc_gate: 26M_gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clk26mhz>; + clocks = <&clk_26M_osc>; + #clock-cells = <0>; + enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + clk_26M_usb: usbhost_gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbgate26mhz>; + clocks = <&clk_26M_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + }; + + clk_26M_snd: snd_gate { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sndgate26mhz>; + clocks = <&clk_26M_osc_gate>; + #clock-cells = <0>; + enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + + reg_5p0v_main: regulator-5p0v-main { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + disp0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu_di0_disp1>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel { + /* no compatible here, bootloader will patch in correct one */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel>; + power-supply = <®_3p3v>; + enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + i2c_gpio: i2c-gpio { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swi2c>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */ + <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,delay-us = <50>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clk_26M_snd>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + #sound-dai-cells = <0>; + }; + }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiospi0>; + status = "okay"; + + gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + + eeprom@0 { + compatible = "eeprom-93xx46"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cs-high; + data-size = <8>; + }; + }; + + mdio_gpio: mdio-gpio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swmdio>; + gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */ + <&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */ + + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "netaux"; + }; + + port@3 { + reg = <3>; + label = "netright"; + }; + + port@4 { + reg = <4>; + label = "netleft"; + }; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "RDU1 audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT"; + simple-audio-card,aux-devs = <&tpa6130a2>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clk_26M_snd>; + }; + }; + + usbh1phy: usbphy1 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1phy>; + clocks = <&clk_26M_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + }; + + usbh2phy: usbphy2 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2phy>; + clocks = <&clk_26M_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(2) | + IMX_AUDMUX_V2_PTCR_TCSEL(2) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + aud3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled0 { + reg = <3>; + label = "system:green:status"; + linux,default-trigger = "default-on"; + }; + + sysled1 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-supply = <&vgen3_reg>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + + tpa6130a2: amp@60 { + compatible = "ti,tpa6130a2"; + reg = <0x60>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ampgpio>; + power-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_3p3v>; + }; + + ds1341: rtc@68 { + compatible = "maxim,ds1341"; + reg = <0x68>; + }; + + /* touch nodes default disabled, bootloader will enable the right one */ + + touchscreen@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; + + touchscreen@4c { + compatible = "atmel,maxtouch"; + reg = <0x4c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; + + touchscreen@20 { + compatible = "syna,rmi4_i2c"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <2>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touch-inverted-y; + touch-swapped-x-y; + syna,sensor-type = <1>; + }; + }; + +}; + +&ipu_di0_disp1 { + remote-endpoint = <&display_in>; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + phy_type = "ulpi"; + fsl,usbphy = <&usbh1phy>; + disable-over-current; + vbus-supply = <®_5p0v_main>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + dr_mode = "host"; + phy_type = "ulpi"; + fsl,usbphy = <&usbh2phy>; + disable-over-current; + vbus-supply = <®_5p0v_main>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb_reg>; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <®_5p0v_main>; + status = "okay"; +}; + +&iomuxc { + pinctrl_ampgpio: ampgpiogrp { + fsl,pins = < + MX51_PAD_GPIO1_9__GPIO1_9 0x5e + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0xa5 + MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x85 + MX51_PAD_AUD3_BB_CK__AUD3_TXC 0xa5 + MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x85 + >; + }; + + pinctrl_clk26mhz: clk26mhzgrp { + fsl,pins = < + MX51_PAD_DI1_PIN12__GPIO3_1 0x85 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_EIM_EB2__FEC_MDIO 0x1f5 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x2180 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x180 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x180 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x180 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x180 + MX51_PAD_NANDF_D11__FEC_RX_DV 0x2084 + MX51_PAD_EIM_CS5__FEC_CRS 0x180 + MX51_PAD_NANDF_RB2__FEC_COL 0x2180 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x2180 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x2004 + MX51_PAD_NANDF_CS3__FEC_MDC 0x2004 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x2180 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x2004 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x2004 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_EIM_A20__GPIO2_14 0x85 + >; + }; + + pinctrl_gpiospi0: gpiospi0grp { + fsl,pins = < + MX51_PAD_CSI2_D18__GPIO4_11 0x85 + MX51_PAD_CSI2_D19__GPIO4_12 0x85 + MX51_PAD_CSI2_HSYNC__GPIO4_14 0x85 + MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x85 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_ipu_disp1: ipudisp1grp { + fsl,pins = < + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX51_PAD_DI1_D0_CS__GPIO3_3 0x85 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x1e0 + MX51_PAD_GPIO1_8__GPIO1_8 0x21e2 + >; + }; + + pinctrl_sndgate26mhz: sndgate26mhzgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 + >; + }; + + pinctrl_swi2c: swi2cgrp { + fsl,pins = < + MX51_PAD_GPIO1_2__GPIO1_2 0xc5 + MX51_PAD_DI1_D1_CS__GPIO3_4 0x400001f5 + >; + }; + + pinctrl_swmdio: swmdiogrp { + fsl,pins = < + MX51_PAD_NANDF_D14__GPIO3_26 0x21e6 + MX51_PAD_NANDF_D15__GPIO3_25 0x21e6 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX51_PAD_CSI1_D8__GPIO3_12 0x85 + MX51_PAD_CSI1_D9__GPIO3_13 0x85 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c4 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0xc5 + MX51_PAD_UART2_TXD__UART2_TXD 0xc5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usbgate26mhz: usbgate26mhzgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT6__GPIO1_19 0x85 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_STP__USBH1_STP 0x0 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x0 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x0 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x0 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x0 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x0 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x0 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x0 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x0 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x0 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x0 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x0 + >; + }; + + pinctrl_usbh1phy: usbh1phygrp { + fsl,pins = < + MX51_PAD_NANDF_D0__GPIO4_8 0x85 + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX51_PAD_EIM_A26__USBH2_STP 0x0 + MX51_PAD_EIM_A24__USBH2_CLK 0x0 + MX51_PAD_EIM_A25__USBH2_DIR 0x0 + MX51_PAD_EIM_A27__USBH2_NXT 0x0 + MX51_PAD_EIM_D16__USBH2_DATA0 0x0 + MX51_PAD_EIM_D17__USBH2_DATA1 0x0 + MX51_PAD_EIM_D18__USBH2_DATA2 0x0 + MX51_PAD_EIM_D19__USBH2_DATA3 0x0 + MX51_PAD_EIM_D20__USBH2_DATA4 0x0 + MX51_PAD_EIM_D21__USBH2_DATA5 0x0 + MX51_PAD_EIM_D22__USBH2_DATA6 0x0 + MX51_PAD_EIM_D23__USBH2_DATA7 0x0 + >; + }; + + pinctrl_usbh2phy: usbh2phygrp { + fsl,pins = < + MX51_PAD_NANDF_D1__GPIO4_7 0x85 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 1ee1d542d9ad088c0bb94a55d66829d6ac1d92b9..378be720b3c7679992c9901ab710da85ae584b7d 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -148,14 +148,14 @@ ipu_di0: port@2 { reg = <2>; - ipu_di0_disp0: endpoint { + ipu_di0_disp1: endpoint { }; }; ipu_di1: port@3 { reg = <3>; - ipu_di1_disp1: endpoint { + ipu_di1_disp2: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 4347a321c78216087e0cfbf79563af73dc3b7577..e48525763b1b90d2d3e80c3c329a3740cb71041e 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -16,7 +16,7 @@ model = "Aries/DENX M53EVK"; compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53"; - display1: display@di1 { + display1: disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; @@ -150,7 +150,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p2v>; @@ -183,7 +183,7 @@ >; }; - led_pin_gpio: led_gpio@0 { + led_pin_gpio: led_gpio { fsl,pins = < MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index df705ba48897f87bad941c11dd693150867f9df4..296dd74fc24685d323e026cc8136d8e743a40237 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -30,7 +30,7 @@ power-supply = <®_backlight>; }; - disp1: display@disp1 { + disp1: disp1 { compatible = "fsl,imx-parallel-display"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_disp1_1>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts new file mode 100644 index 0000000000000000000000000000000000000000..cce959438a79679e634ac8c191fedd85afcbfdca --- /dev/null +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -0,0 +1,1042 @@ +/* + * Copyright 2014 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx53.dtsi" +#include + +/ { + model = "General Electric CS ONE"; + compatible = "ge,imx53-cpuvo", "fsl,imx53"; + + aliases { + spi0 = &cspi; + spi1 = &ecspi1; + spi2 = &ecspi2; + }; + + chosen { + stdout-path = "&uart1:115200n8"; + }; + + memory@70000000 { + device_type = "memory"; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; + }; + + cko2_11M: sgtl-clock-cko2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + sgtlsound: sound { + compatible = "fsl,imx53-cpuvo-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-cpuvo-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; + + reg_sgtl5k: regulator-sgtl5k { + compatible = "regulator-fixed"; + regulator-name = "regulator-sgtl5k"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-0 = <&pinctrl_usb_otg_vbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usbh2_vbus: regulator-usbh2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbh3_vbus: regulator-usbh3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh3_vbus>; + gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + pwm_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35 + 38 40 43 45 48 51 53 56 58 61 63 66 68 71 + 73 76 79 81 84 86 89 91 94 96 99 102 104 + 107 109 112 114 117 119 122 124 127 130 + 132 135 137 140 142 145 147 150 153 155 + 158 160 163 165 168 170 173 175 178 181 + 183 186 188 191 193 196 198 201 204 206 + 209 211 214 216 219 221 224 226 229 232 + 234 237 239 242 244 247 249 252 255>; + default-brightness-level = <0>; + enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "pwm-leds"; + + alarm-brightness { + pwms = <&pwm1 0 100000>; + max-brightness = <255>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + active-delay = <100>; + inactive-delay = <10>; + wait-delay = <100>; + }; + + power-gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + power-button { + label = "Power button"; + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + touch-lock-key { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + touch-lock-button { + label = "Touch lock button"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + usbphy2: usbphy2 { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; + clock-names = "main_clk"; + clock-frequency = <24000000>; + clocks = <&clks IMX5_CLK_CKO2>; + assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; + assigned-clock-parents = <&clks IMX5_CLK_OSC>; + }; + + usbphy3: usbphy3 { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + clock-names = "main_clk"; + + clock-frequency = <24000000>; + clocks = <&clks IMX5_CLK_CKO2>; + assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; + assigned-clock-parents = <&clks IMX5_CLK_OSC>; + }; + + panel-lvds0 { + compatible = "nvd,9128"; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&cpu0 { + /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ + operating-points = < + /* kHz uV */ + 166666 850000 + 400000 900000 + 800000 1050000 + 1000000 1200000 + >; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW + &gpio4 10 GPIO_ACTIVE_LOW + &gpio4 11 GPIO_ACTIVE_LOW + &gpio4 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + spidev1: spi@1 { + compatible = "ge,achc"; + reg = <1>; + spi-max-frequency = <1000000>; + }; + + gpioxra0: gpio@2 { + compatible = "exar,xra1403"; + reg = <2>; + gpio-controller; + #gpio-cells = <2>; + spi-max-frequency = <1000000>; + }; + + gpioxra1: gpio@3 { + compatible = "exar,xra1403"; + reg = <3>; + gpio-controller; + #gpio-cells = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-chipselects = <1>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + status = "okay"; + + da9053@0 { + compatible = "dlg,da9053-aa"; + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <12 0x8>; + spi-max-frequency = <1000000>; + + regulators { + buck1_reg: buck1 { + regulator-name = "BUCKCORE"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "BUCKPRO"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "BUCKMEM"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + buck4_reg: buck4 { + regulator-name = "BUCKPERI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1_1v3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2_1v3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "ldo3_3v3"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "ldo4_2v775"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "ldo5_3v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "ldo6_1v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-name = "ldo7_2v75"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "ldo8_1v8"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo9_reg: ldo9 { + regulator-name = "ldo9_1v5"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + regulator-always-on; + }; + + ldo10_reg: ldo10 { + regulator-name = "ldo10_1v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + }; + }; + +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3>; + bus-width = <8>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + + i2c4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_sgtl5k>; + VDDIO-supply = <®_sgtl5k>; + clocks = <&cko2_11M>; + status = "okay"; + }; + }; + + i2c5: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + + temp@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + }; + + mma8453q: accelerometer@1c { + compatible = "fsl,mma8453"; + reg = <0x1c>; + interrupt-parent = <&gpio1>; + interrupts = <6 0>; + interrupt-names = "INT1"; + }; + + mpl3115: pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + }; + + i2c6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c8: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c9: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c10: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c11: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + status = "okay"; + + touchscreen@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio5>; + interrupts = <4 0x8>; + }; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi"; + vbus-supply = <®_usb_otg_vbus>; + pinctrl-0 = <&pinctrl_usb_otg>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_vbus>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + phy_type = "ulpi"; + dr_mode = "host"; + fsl,usbphy = <&usbphy2>; + vbus-supply = <®_usbh2_vbus>; + status = "okay"; +}; + +&usbh3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh3>; + phy_type = "ulpi"; + dr_mode = "host"; + vbus-supply = <®_usbh3_vbus>; + fsl,usbphy = <&usbphy3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_rev6>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400 + MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400 + MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400 + MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400 + MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400 + MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400 + MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400 + MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400 + MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400 + MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400 + /* ECSPI1_SS0, must treat as GPIO for EzPort */ + MX53_PAD_DISP0_DAT23__GPIO5_17 0x400 + MX53_PAD_KEY_COL2__GPIO4_10 0x0 + MX53_PAD_KEY_ROW2__GPIO4_11 0x0 + MX53_PAD_KEY_COL3__GPIO4_12 0x0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0 + MX53_PAD_EIM_OE__ECSPI2_MISO 0x0 + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0 + MX53_PAD_EIM_RW__GPIO2_26 0x0 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_esdhc3: esdhc3grp { + fsl,pins = < + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x0 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x0 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0 + >; + }; + + pinctrl_hog_rev6: hoggrp { + fsl,pins = < + /* CKO2 */ + MX53_PAD_GPIO_3__CCM_CLKO2 0x4 + /* DEFIB_SYNC_MARKER_IN_IRQ */ + MX53_PAD_GPIO_5__GPIO1_5 0x0 + /* ACCELEROMETER_DATA_RDY_N */ + MX53_PAD_GPIO_6__GPIO1_6 0x0 + /* TEMPERATURE_ALERT_N */ + MX53_PAD_GPIO_7__GPIO1_7 0x0 + /* BAROMETRIC_PRESSURE_DATA_RDY_N */ + MX53_PAD_GPIO_8__GPIO1_8 0x0 + /* DOCKING_I2C_INTERFACE_IRQ_N */ + MX53_PAD_PATA_DATA4__GPIO2_4 0x0 + /* PWR_OUT_TO_DOCK_FAULT_N */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x0 + /* ENABLE_PWR_TO_DOCK_N */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x0 + /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */ + MX53_PAD_PATA_DATA7__GPIO2_7 0x0 + /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */ + MX53_PAD_PATA_DATA12__GPIO2_12 0x0 + /* DOCK_PRESENT_N */ + MX53_PAD_PATA_DATA13__GPIO2_13 0x0 + /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x0 + /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x0 + /* RESET_IMX535_ETHERNET_PHY_N */ + MX53_PAD_EIM_A22__GPIO2_16 0x0 + /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */ + MX53_PAD_EIM_A21__GPIO2_17 0x0 + /* RESET_I2C1_BUS_SEGMENT_MUX_N */ + MX53_PAD_EIM_A20__GPIO2_18 0x0 + /* RESET_IMX535_USB_HOST3_PHY_N */ + MX53_PAD_EIM_A19__GPIO2_19 0x0 + /* ESDHC3_EMMC_NAND_RST_N */ + MX53_PAD_EIM_A18__GPIO2_20 0x0 + /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */ + MX53_PAD_EIM_A17__GPIO2_21 0x0 + /* POWER_DOWN_LVDS0_DESERIALIZER_N */ + MX53_PAD_EIM_A16__GPIO2_22 0x0 + /* POWER_DOWN_LVDS1_DESERIALIZER_N */ + MX53_PAD_EIM_LBA__GPIO2_27 0x0 + /* RESET_DP0_TRANSMITTER_N */ + MX53_PAD_EIM_EB0__GPIO2_28 0x0 + /* RESET_DP1_TRANSMITTER_N */ + MX53_PAD_EIM_EB1__GPIO2_29 0x0 + /* ENABLE_SPDIF_AUDIO_TO_DP0 */ + MX53_PAD_EIM_DA0__GPIO3_0 0x0 + /* ENABLE_SPDIF_AUDIO_TO_DP1 */ + MX53_PAD_EIM_DA1__GPIO3_1 0x0 + /* LVDS1_MUX_CTRL */ + MX53_PAD_EIM_DA2__GPIO3_2 0x0 + /* LVDS0_MUX_CTRL */ + MX53_PAD_EIM_DA3__GPIO3_3 0x0 + /* DP1_TRANSMITTER_IRQ */ + MX53_PAD_EIM_DA4__GPIO3_4 0x0 + /* DP0_TRANSMITTER_IRQ */ + MX53_PAD_EIM_DA5__GPIO3_5 0x0 + /* USB_RESET_N */ + MX53_PAD_EIM_DA6__GPIO3_6 0x0 + /* ENABLE_BATTERY_CHARGER */ + MX53_PAD_EIM_DA7__GPIO3_7 0x0 + /* SOFTWARE_CONTROLLED_PWR_CYCLE */ + MX53_PAD_EIM_DA8__GPIO3_8 0x0 + /* SOFTWARE_CONTROLLED_POWERDOWN */ + MX53_PAD_EIM_DA9__GPIO3_9 0x0 + /* DC_PWR_IN_OK */ + MX53_PAD_EIM_DA10__GPIO3_10 0x0 + /* BATT_PRESENT_N */ + MX53_PAD_EIM_DA11__GPIO3_11 0xe4 + /* PMIC_IRQ_N */ + MX53_PAD_EIM_DA12__GPIO3_12 0x0 + /* PMIC_VDD_FAULT_STATUS_N */ + MX53_PAD_EIM_DA13__GPIO3_13 0x0 + /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */ + MX53_PAD_EIM_DA14__GPIO3_14 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_DA15__GPIO3_15 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_D22__GPIO3_22 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_D24__GPIO3_24 0x0 + /* NBP_PUMP_VALVE_PWR_ENABLE */ + MX53_PAD_EIM_D25__GPIO3_25 0x0 + /* NIBP_RESET_N */ + MX53_PAD_EIM_D26__GPIO3_26 0x0 + /* LATCHED_OVERPRESSURE_N */ + MX53_PAD_EIM_D27__GPIO3_27 0x0 + /* NBP_SBWTCLK */ + MX53_PAD_EIM_D29__GPIO3_29 0x0 + /* ENABLE_WIFI_MODULE */ + MX53_PAD_GPIO_11__GPIO4_1 0x400 + /* WIFI_MODULE_IRQ_N */ + MX53_PAD_GPIO_12__GPIO4_2 0x400 + /* ENABLE_BLUETOOTH_MODULE */ + MX53_PAD_GPIO_13__GPIO4_3 0x400 + /* RESET_IMX535_USB_HOST2_PHY_N */ + MX53_PAD_GPIO_14__GPIO4_4 0x400 + /* ONKEY_IS_DEPRESSED */ + MX53_PAD_KEY_ROW3__GPIO4_13 0x0 + /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */ + MX53_PAD_EIM_WAIT__GPIO5_0 0x0 + /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */ + MX53_PAD_EIM_A25__GPIO5_2 0x0 + /* I2C_PCAP_TOUCHSCREEN_IRQ_N */ + MX53_PAD_EIM_A24__GPIO5_4 0x0 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT13__GPIO5_7 0x400 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT14__GPIO5_8 0x400 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT15__GPIO5_9 0x400 + /* HOST_CONTROLLED_RESET_TO_LCD_N */ + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0 + /* HOST_CONTROLLED_RESET_TO_PCAP_N */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x0 + /* LR_SCAN_CTRL */ + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0 + /* UD_SCAN_CTRL */ + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0 + /* DATA_WIDTH_CTRL */ + MX53_PAD_CSI0_DAT10__GPIO5_28 0x0 + /* BACKLIGHT_ENABLE */ + MX53_PAD_CSI0_DAT11__GPIO5_29 0x0 + /* MED_USB_PORT_1_HOST_SELECT */ + MX53_PAD_EIM_A23__GPIO6_6 0x0 + /* MED_USB_PORT_2_HOST_SELECT */ + MX53_PAD_NANDF_CLE__GPIO6_7 0x0 + /* MED_USB_PORT_3_HOST_SELECT */ + MX53_PAD_NANDF_ALE__GPIO6_8 0x0 + /* MED_USB_PORT_4_HOST_SELECT */ + MX53_PAD_NANDF_WP_B__GPIO6_9 0x0 + /* MED_USB_PORT_5_HOST_SELECT */ + MX53_PAD_NANDF_RB0__GPIO6_10 0x0 + /* MED_USB_PORT_6_HOST_SELECT */ + MX53_PAD_NANDF_CS0__GPIO6_11 0x0 + /* MED_USB_PORT_7_HOST_SELECT */ + MX53_PAD_NANDF_WE_B__GPIO6_12 0x0 + /* MED_USB_PORT_8_HOST_SELECT */ + MX53_PAD_NANDF_RE_B__GPIO6_13 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_0 */ + MX53_PAD_NANDF_CS1__GPIO6_14 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_1 */ + MX53_PAD_NANDF_CS2__GPIO6_15 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_2 */ + MX53_PAD_NANDF_CS3__GPIO6_16 0x0 + /* POWER_AND_BOOT_STATUS_INDICATOR */ + MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 + /* ACTIVATE_ALARM_LIGHT_RED */ + MX53_PAD_PATA_DIOR__GPIO7_3 0x0 + /* ACTIVATE_ALARM_LIGHT_YELLOW */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x0 + /* ACTIVATE_ALARM_LIGHT_CYAN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x0 + /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ + MX53_PAD_GPIO_16__GPIO7_11 0x0 + /* BATTERY_STATUS_INDICATOR_AMBER */ + MX53_PAD_GPIO_17__GPIO7_12 0x0 + /* AUDIO_ALARMS_SILENCED_INDICATOR */ + MX53_PAD_GPIO_18__GPIO7_13 0x0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D28__GPIO3_28 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4 + MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D16__GPIO3_16 0x1e4 + MX53_PAD_EIM_EB2__GPIO2_30 0x1e4 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4 + MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX53_PAD_GPIO_9__PWM1_PWMO 0x5 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_EIM_D23__UART3_CTS 0x1e4 + MX53_PAD_EIM_EB3__UART3_RTS 0x1e4 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 + >; + }; + + pinctrl_usb_otg_vbus: usb-otg-vbusgrp { + fsl,pins = < + /* USB_HS_OTG_VBUS_ENABLE */ + MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4 + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + /* USB H2 */ + MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180 + MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180 + MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180 + MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180 + MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180 + MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180 + MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180 + MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180 + MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180 + MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180 + MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180 + MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5 + MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180 + >; + }; + + pinctrl_usbh2_vbus: usbh2-vbusgrp { + fsl,pins = < + /* USB_HS_HOST2_VBUS_ENABLE */ + MX53_PAD_EIM_D31__GPIO3_31 0x0 + >; + }; + + pinctrl_usbh3_vbus: usbh3-vbusgrp { + fsl,pins = < + /* USB_HS_HOST3_VBUS_ENABLE */ + MX53_PAD_CSI0_DAT9__GPIO5_27 0x0 + >; + }; + + pinctrl_usbh3: usbh3grp { + fsl,pins = < + /* USB H3 */ + MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180 + MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180 + MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180 + MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180 + MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180 + MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180 + MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180 + MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180 + MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5 + MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180 + MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180 + MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180 + MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180 + >; + }; + + pinctrl_usb_otg: usbotggrp { + fsl,pins = < + /* USB_OTG_FAULT_N */ + MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 683dcbe27cbd63b6b30a8e20b7dc52d604a84616..41a2e2a2b07926235e321a206b7f0514546a8d2b 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -22,7 +22,7 @@ <0xb0000000 0x20000000>; }; - display0: display@di0 { + display0: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb565"; pinctrl-names = "default"; @@ -172,7 +172,7 @@ >; }; - led_pin_gpio7_7: led_gpio7_7@0 { + led_pin_gpio7_7: led_gpio7_7 { fsl,pins = < MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 >; @@ -314,7 +314,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p2v>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 33cb64fc8372bbfd8d4f1d17840bd307e0e92a2a..51f4a42a55e2d7d97389304afcae6e45899003df 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -232,12 +232,12 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; }; - magnetometer: mag3110@0e { + magnetometer: mag3110@e { compatible = "fsl,mag3110"; reg = <0x0e>; }; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 0ecb43d88522318701304fad35e3c214cfcb276e..7eb53e48c2f441d92f8968db3728d2fcdc2ae5ce 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -1,12 +1,42 @@ /* - * Copyright 2013 Lothar Waßmann + * Copyright 2013-2017 Lothar Waßmann * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -24,7 +54,7 @@ }; soc { - display: display@di0 { + display: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; @@ -173,28 +203,24 @@ default-brightness-level = <50>; }; - regulators { - reg_lcd_pwr: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LCD POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; - reg_lcd_reset: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "LCD RESET"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; + reg_lcd_reset: regulator-lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "LCD RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; }; }; @@ -203,7 +229,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_2v5>; @@ -228,7 +254,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc2007>; interrupt-parent = <&gpio3>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <660>; wakeup-source; diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts index 3cf682a681f40a986e8eb3142f3621ec5d6736b0..f2b2ad3ce9e52d6084c31f8983dcf21108079159 100644 --- a/arch/arm/boot/dts/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts @@ -1,6 +1,42 @@ /* - * Copyright 2013 Lothar Waßmann + * Copyright 2013-2017 Lothar Waßmann * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 at the following locations: @@ -63,82 +99,46 @@ default-brightness-level = <50>; }; - regulators { - reg_lcd_pwr0: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LVDS0 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; - - reg_lcd_pwr1: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "LVDS1 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; + reg_lcd_pwr0: regulator-lvds0-pwr { + compatible = "regulator-fixed"; + regulator-name = "LVDS0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; }; -}; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - touchscreen2: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti2>; - interrupt-parent = <&gpio3>; - interrupts = <23 0>; - wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - wakeup-source; + reg_lcd_pwr1: regulator-lvds1-pwr { + compatible = "regulator-fixed"; + regulator-name = "LVDS1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; }; }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; clocks = <&mclk>; }; - - touchscreen1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti1>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; }; &iomuxc { imx53-tx53-x13x { - pinctrl_i2c2: i2c2-grp1 { - fsl,pins = < - MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 - MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 - >; - }; - pinctrl_lvds0: lvds0grp { fsl,pins = < MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 7807c1fa110176b12cfa26f238186da8dcdeafe7..71b58b6933e1d7fb57cfe90b97b1232d8b8efaed 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -1,15 +1,45 @@ /* - * Copyright 2012 + * Copyright 2012-2017 * based on imx53-qsb.dts * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx53.dtsi" @@ -66,61 +96,50 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2v5: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; - reg_3v3: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - reg_can_xcvr: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - }; + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + }; - reg_usbh1_vbus: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_vbus>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usbotg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usbotg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_vbus>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -208,14 +227,17 @@ phy0: ethernet-phy@0 { interrupt-parent = <&gpio2>; - interrupts = <4>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; }; }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-0 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; @@ -225,7 +247,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ds1339>; interrupt-parent = <&gpio4>; - interrupts = <20 0>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; @@ -368,15 +392,29 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 - MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D21__GPIO3_21 0x400001e6 + MX53_PAD_EIM_D28__GPIO3_28 0x400001e6 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < - MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000 - MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4 + MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX53_PAD_GPIO_3__GPIO1_3 0x400001e6 + MX53_PAD_GPIO_6__GPIO1_6 0x400001e6 >; }; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index fc51b87ad2087022e8b8648c71fac18e00abb762..25c78f19826c823a19201e40c15604e1ae0f2707 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -130,7 +130,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 8bf0d89cdd355cf0c9484335476e08fb0fca1b5e..589a67c5f7969fb15b59e1910ea96db528dbf9e4 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -80,7 +80,7 @@ ports = <&ipu_di0>, <&ipu_di1>; }; - tzic: tz-interrupt-controller@0fffc000 { + tzic: tz-interrupt-controller@fffc000 { compatible = "fsl,imx53-tzic", "fsl,tzic"; interrupt-controller; #interrupt-cells = <1>; @@ -299,14 +299,14 @@ reg = <0x53f00000 0x60>; }; - usbphy0: usbphy@0 { + usbphy0: usbphy-0 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; clock-names = "main_clk"; status = "okay"; }; - usbphy1: usbphy@1 { + usbphy1: usbphy-1 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; clock-names = "main_clk"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index 0677625463d6fec91172fb251f4a49955940c108..5f0d196495d08ff23b6b2d2478f34545c7bca110 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -52,7 +52,7 @@ reg = <0x10000000 0x40000000>; }; - display0: display@di0 { + display0: disp0 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx-parallel-display"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 32a812b1839ea0cc5e3ab4451b031e6053fb9b29..cc418cecabdb3b76ef5be767184950b5d609d64f 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -32,7 +32,7 @@ }; soc { - display0: display@di0 { + display0: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 15203f0e9725cb775dac06399ab212d12479e536..126ff964edede598c126d62b0561979f5c6a3c06 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -21,7 +21,7 @@ }; soc { - display0: display@di0 { + display0: disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 26541538562c6d937fde7b96066112c5c7463689..5705ebee05955932f8e7cfce562d5c4115b8f1ae 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -88,7 +88,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts index 6de83c72bd7243448ca5bd0113880ce5c016fae0..971f9fc39c66c8ec22f7acf63970b7699587b29d 100644 --- a/arch/arm/boot/dts/imx6dl-icore.dts +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -57,3 +57,12 @@ &can2 { status = "okay"; }; + +&i2c1 { + max11801: touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 275c6c05219dbdc54ba4c994459a45506608e65b..23e108204e1e7d505515fb3e8760eb2ee8da9308 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -157,7 +157,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -165,7 +165,7 @@ VDDIO-supply = <®_3p3v>; }; - pmic: pf0100@08 { + pmic: pf0100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts index aac42ac465b64619a82773bf097cc49051c5aa08..51a9bb9d6bc2811bc347b1553e8ba74a2f2f642f 100644 --- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..fc23b4d291a1b462695c192f3618b7f86de71583 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8034.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts index ff8f7b1c42825b5f24fe16846a7a01367cae992a..9eb2ef17339c739080b9ea02b753574ba582197f 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Waßmann + * Copyright 2015-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8034 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu@1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -227,11 +68,3 @@ MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ >; }; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..4101c6597721c70cf167a2c89a21730121bbdee0 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6s-8035.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts index f988950e9443d44b19886f12ad9d9f423556c91e..a5532ecc18c5ad9d3901f53e575483da3cbe9cc6 100644 --- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015-2016 Lothar Waßmann + * Copyright 2015-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,174 +42,15 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6S-8035 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - aliases { - display = &display; - ipu1 = &ipu1; - }; - cpus { /delete-node/ cpu@1; }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -220,14 +61,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts index d1f1298ec55a8f28e80a297ee9e15d62d8385d28..67ed0452f5de5c1a2437a6ccbf70b7fdcdb195e4 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,166 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-801x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..d34189fc52d9793e70ab56a6b6c23b1501122071 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-8033.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts index 4d3204a56f46114347be5943691be5917e752dab..7030b2654bbd23d33580d79679e7016671b8a0e0 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6U-8033 Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,14 +57,6 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..aef5fcc42904f6e5775e92df3b72573252e5a0b5 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl-tx6u-801x.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index 5e0c6bb49f37a38b50ae6e849fad3898f0428c21..5342f2f5a8a856c25fbc70200212f6f6aec96ce1 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,137 +42,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { model = "Ka-Ro electronics TX6U-811x Module"; compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&i2c3 { - polytouch2: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts index b9a783f7160e29fd177f4e4697625722ee1b9ba7..c4588fb0bf6fe492ed84f48adcc8eea5c94d9299 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Waßmann + * Copyright 2016-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,216 +40,9 @@ */ /dts-v1/; -#include "imx6dl.dtsi" -#include "imx6qdl-tx6.dtsi" +#include "imx6dl-tx6u-811x.dts" +#include "imx6qdl-tx6-mb7.dtsi" / { - model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; - compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; - -&i2c3 { - polytouch1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; + model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard"; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts new file mode 100644 index 0000000000000000000000000000000000000000..aa4d4faaaec4e0d45bcaf6de097a1a8cba841f09 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" + +/ { + model = "Wandboard i.MX6 Dual Lite Board revD1"; + compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 8475e6cc59ac63c68036987845e33f8c3e50a164..4d693a75ce98b99ba7d9c1ec57f13b4361ddba39 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -60,35 +60,35 @@ }; soc { - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips1: aips-bus@02000000 { - iomuxc: iomuxc@020e0000 { + aips1: aips-bus@2000000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6dl-iomuxc"; }; - pxp: pxp@020f0000 { + pxp: pxp@20f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; }; - epdc: epdc@020f4000 { + epdc: epdc@20f4000 { reg = <0x020f4000 0x4000>; interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; }; - lcdif: lcdif@020f8000 { + lcdif: lcdif@20f8000 { reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; }; }; - aips2: aips-bus@02100000 { - i2c4: i2c@021f8000 { + aips2: aips-bus@2100000 { + i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 4bbfe3d6102756178a14e76a4b60b1c02dfead96..8b56656e53da8c50ff9a9ba4468d280b2250780b 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -76,7 +76,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index a35c7a54ad3b5484be85987024d771e42fb01bb1..27dc0fc686a918b75dc9ac37db5e670560c97217 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -77,7 +77,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 60d33e99de76037cf546c8000ade4304c959c1c6..40b2c67fe7af2c1511c19de5171ac55541be442b 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -76,7 +76,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 1015e55ca8f7bd9eaa2edf68ed499f577fbac083..b915837bbb5f7f867aad5fc27d39898a034ce4fb 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -165,7 +165,7 @@ #size-cells = <0>; reg = <0x3>; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&mclk>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index fe6ab0aa34f9dd5f7b5d0fb19b6c9be4858fb9d9..bc7587c383f687b72abc736809a7826e73840dca 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -77,8 +77,7 @@ regulator-name = "regulator-pcie-power-on-gpio"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; }; reg_usb_h1_vbus: usb_h1_vbus { @@ -362,7 +361,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - vdd-supply = <®_pcie_power_on_gpio>; + vpcie-supply = <®_pcie_power_on_gpio>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts new file mode 100644 index 0000000000000000000000000000000000000000..16658b76fc4e8ed18653950255eeb123efb1a128 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts @@ -0,0 +1,51 @@ +/* + * Copyright 2017 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-display5.dtsi" + +&panel { + compatible = "tianma,tm070jdhg30"; +}; + +&ldb { + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..4084de43d4d9c26ee83576a36130ac96e4ae483b --- /dev/null +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -0,0 +1,596 @@ +/* + * Copyright 2017 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" + +#include +#include +#include + +/ { + model = "Liebherr (LWN) display5 i.MX6 Quad Board"; + compatible = "lwn,display5", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 0>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <250>; + enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lvds>; + gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <300000>; + }; + + sound { + compatible = "simple-audio-card"; + label = "tfa9879-mono"; + + simple-audio-card,dai-link { + /* DAC */ + format = "i2s"; + bitclock-master = <&dailink_master>; + frame-master = <&dailink_master>; + + dailink_master: cpu { + sound-dai = <&ssi2>; + }; + codec { + sound-dai = <&codec>; + }; + }; + }; + + panel: panel-lvds0 { + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(5) | + IMX_AUDMUX_V2_PTCR_TCSEL(5) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(5) + >; + }; + + aud6 { + fsl,audmux-port = <5>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_RFSEL(8) | + IMX_AUDMUX_V2_PTCR_RCSEL(8) | + IMX_AUDMUX_V2_PTCR_TFSEL(1) | + IMX_AUDMUX_V2_PTCR_TCSEL(1) | + IMX_AUDMUX_V2_PTCR_RFSDIR | + IMX_AUDMUX_V2_PTCR_RCLKDIR | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>; + status = "okay"; + + s25fl256s: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + + partition@0 { + label = "SPL (spi)"; + reg = <0x0 0x20000>; + read-only; + }; + partition@1 { + label = "u-boot (spi)"; + reg = <0x20000 0x100000>; + read-only; + }; + partition@2 { + label = "uboot-env (spi)"; + reg = <0x120000 0x10000>; + }; + partition@3 { + label = "uboot-envr (spi)"; + reg = <0x130000 0x10000>; + }; + partition@4 { + label = "linux-recovery (spi)"; + reg = <0x140000 0x800000>; + }; + partition@5 { + label = "swupdate-fitImg (spi)"; + reg = <0x940000 0x400000>; + }; + partition@6 { + label = "swupdate-initramfs (spi)"; + reg = <0xD40000 0x800000>; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ðernet_phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@0 { + compatible = "marvell,88E1510"; + device_type = "ethernet-phy"; + /* Set LED0 control: */ + /* On - Link, Blink - Activity, Off - No Link */ + marvell,reg-init = <3 0x10 0 0x1011>; + max-speed = <100>; + reg = <0>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: tfa9879@6C { + #sound-dai-cells = <0>; + compatible = "nxp,tfa9879"; + reg = <0x6C>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + at24@50 { + compatible = "atmel,24c256"; + pagesize = <64>; + reg = <0x50>; + }; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm2 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* I2S OUTPUT AUD6*/ + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 + >; + }; + + pinctrl_backlight: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi2_cs: ecspi2csgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1 + >; + }; + + pinctrl_ecspi2_flwp: ecspi2flwpgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3_cs: ecspi3csgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0 + >; + }; + + pinctrl_ecspi3_flwp: ecspi3flwpgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lvds: reqlvdsgrp { + fsl,pins = < + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x030b0 + >; + }; + + pinctrl_usbh1_vbus: usbh1_vbus_grp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 33eb7f180995dfccbd483d4e140e3b63902753a8..f0316ea96898d31fba547c5c95d57aa7ebd606be 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -139,7 +139,7 @@ &pinctrl_pfuze>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; interrupt-parent = <&gpio3>; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 9dbeea05a9495f6fc2b5e56b55659508ca1230df..29adaa7c72f84cc4efb327df156f8af584337491 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -211,7 +211,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -322,7 +322,7 @@ reg = <0x1c>; }; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -330,7 +330,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; @@ -392,127 +392,124 @@ }; &iomuxc { - imx6q-gw5400-a { - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 8f9252889971a1421f28d05fde46e7956d0a6230..a3269f57df2b5ce74fc036b8d69b25e2fbb273bb 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -185,7 +185,7 @@ reg = <0x68>; }; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; pinctrl-names = "default"; @@ -195,7 +195,7 @@ VDDIO-supply = <®_3p3v>; }; - tc358743: tc358743@0f { + tc358743: tc358743@f { compatible = "toshiba,tc358743"; reg = <0x0f>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts index e451b4ceb4d81ef1972f0b1f51a782cf3bf94a1c..b81f48c6a8c68a9eab475e989db3297d73cf39ac 100644 --- a/arch/arm/boot/dts/imx6q-icore-rqs.dts +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -47,30 +47,6 @@ / { model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit"; compatible = "engicam,imx6-icore-rqs", "fsl,imx6q"; - - sound { - compatible = "fsl,imx-audio-sgtl5000"; - model = "imx-audio-sgtl5000"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&i2c3 { - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - VDDD-supply = <®_1p8v>; - }; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index eedbe737420c8472ac030b25744875033c418790..cab36f48d5f109e9a3a6f434a5703591ce1660d0 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -121,7 +121,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pfuze100: pmic@08 { + pfuze100: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index d83cfb6ec598993831d5447fb89803107fe45edc..7d7dc59507cfd0bf3e2e55d3d64a2107fdb729dd 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -158,7 +158,6 @@ regulator-max-microvolt = <1500000>; gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; }; reg_sata: regulator-sata { @@ -255,7 +254,7 @@ reg = <0x68>; }; - sbs_battery: bq20z75@0b { + sbs_battery: bq20z75@b { compatible = "sbs,sbs-battery"; reg = <0x0b>; sbs,i2c-retry-count = <50>; @@ -295,7 +294,7 @@ pinctrl-0 = <&pinctrl_i2c2_novena>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -447,6 +446,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_novena>; reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts new file mode 100644 index 0000000000000000000000000000000000000000..1effb58f304c3f2c76750ff4452e0bec08e3c936 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -0,0 +1,693 @@ +/* + * Copyright (C) 2017 NutsBoard.Org + * + * Author: Wig Cheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include +#include +#include "imx6q.dtsi" + +/ { + model = "NutsBoard i.MX6 Quad Pistachio board"; + compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q"; + + chosen { + stdout-path = &uart4; + }; + + memory: memory { + reg = <0x10000000 0x80000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = ; + }; + }; + + sound { + compatible = "fsl,imx-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "audio-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + brightness-levels = < + 0 /*1 2 3 4 5 6*/ 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <94>; + status = "okay"; + }; + + panel { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_sgtl5000>; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + ar1021@4d { + compatible = "microchip,ar1021-i2c"; + reg = <0x4d>; + interrupt-parent = <&gpio6>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /*pcie power*/ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /*LCD power*/ + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /*backlight power*/ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 /*SD3 CD pin*/ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /*codec power*/ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /*touch reset*/ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b01 /*touch irq*/ + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0/*backlight pwr*/ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /*gpio 5V_1*/ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 /*gpio 5V_2*/ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /*gpio 5V_3*/ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /*gpio 5V_4*/ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 /*AUX_5V_EN*/ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 /*AUX_5VB_EN*/ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 /*AUX_3V3_EN*/ + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /*I2C expander pwr*/ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + /* AR8035 reset */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 /* sys_mclk */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x130b0 /*headphone det*/ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 /*microphone det*/ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x15059 /*BT_EN*/ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059 + MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059 + MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059 + MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x15059 /*WL_EN_LDO*/ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x15059 /*WL_EN*/ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x15059 /*WL_IRQ*/ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b00 + >; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + fsl,dte-mode; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <0x5>; +}; + +&usbphy2 { + fsl,tx-d-cal = <0x5>; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + keep-power-in-suspend; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <&wlan_en_reg>; + no-1-8-v; + keep-power-in-suspend; + non-removable; + cap-power-off-card; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 06f492e17ca70edc3de4aa21fbe5357397febaeb..a3cd7afac20a8c764497a07404fce94529b4297b 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -158,7 +158,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts index 71746edc2ee9218d21cd8a738188ff24370862b0..ac3050a835e5502bf24ed3f04dc6500003d534f8 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -116,14 +62,14 @@ xceiver-supply = <®_3v3>; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index f9cd21a41a797c8b2dc81a04f1485de650611e3e..4ee860b626ff6842d23ee3971d1a85b21416f79c 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,166 +42,13 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { - model = "Ka-Ro electronics TX6Q-1010 Module"; + model = "Ka-Ro electronics TX6Q-1010/-1030 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts index 959ff3fb7304e4c3aef373eb6801e54ddb086d90..a773f252816cb54091a60189be147c6d92616a03 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,70 +42,16 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; +}; - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&ET070001DM6>; - - ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; +&backlight { + pwms = <&pwm2 0 500000 0>; + /delete-property/ turn-on-delay-ms; }; &can1 { @@ -124,14 +70,14 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &kpp { status = "disabled"; }; +&lcd_panel { + compatible = "edt,etm0700g0edh6"; +}; + ®_can_xcvr { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts index b49133d25d80995e7a38d87195fc1c588c753efc..0a4daec8d3ad3abd733892febf7ab11029bc47ff 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,164 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1020 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_3v3>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_1>; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -210,14 +57,15 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; +&ipu2 { + status = "disabled"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <4>; + non-removable; no-1-8-v; fsl,wp-controller; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..9ffbb0fe7df860c1d343e0daca42166e6b326a57 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1036.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts index 7c152e32758cbc63b634daa37b55c0c44a947d01..cb2fcb4896c6590efae1c8e411eca573426243aa 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,169 +42,11 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" / { model = "Ka-Ro electronics TX6Q-1036 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &display; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - display: display@di0 { - compatible = "fsl,imx-parallel-display"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_disp0_2>; - interface-pix-fmt = "rgb24"; - status = "okay"; - - port { - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - display-timings { - native-mode = <&vga>; - - vga: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; }; &ds1339 { @@ -215,18 +57,10 @@ status = "disabled"; }; -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - &ipu2 { status = "disabled"; }; -®_lcd0_pwr { - status = "disabled"; -}; - &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..d43a5d8f174976bc78ae0c5d4043daa3d5e3d669 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q-tx6q-1010.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 0433e220a931318a216fe4852d34600fad840a7c..f7b0acb65352c3c3852c3e2ca7f70aef2a37a508 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,141 +42,17 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" / { - model = "Ka-Ro electronics TX6Q-1110 Module"; + model = "Ka-Ro electronics TX6Q-1110/-1130 Module"; compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &lvds0; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 0>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 0>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&i2c3 { - polytouch1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; }; -&kpp { - status = "disabled"; /* pad conflict with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "disabled"; - - display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; +&ipu2 { + status = "disabled"; }; &sata { status = "okay"; }; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts index d78b129d01ea492d6b65e3885ca7974a0225c269..387edf2b3f96b437da6b4b421b5c71faf2d64db9 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Lothar Waßmann + * Copyright 2016-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,225 +40,9 @@ */ /dts-v1/; -#include "imx6q.dtsi" -#include "imx6qdl-tx6.dtsi" +#include "imx6q-tx6q-1110.dts" +#include "imx6qdl-tx6-mb7.dtsi" / { model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard"; - compatible = "karo,imx6q-tx6q", "fsl,imx6q"; - - aliases { - display = &lvds0; - ipu1 = &ipu2; - lvds0 = &lvds0; - lvds1 = &lvds1; - }; - - backlight0: backlight0 { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd0_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; - - backlight1: backlight1 { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd1_pwr>; - /* - * a poor man's way to create a 1:1 relationship between - * the PWM value and the actual duty cycle - */ - brightness-levels = < 0 1 2 3 4 5 6 7 8 9 - 10 11 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27 28 29 - 30 31 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 48 49 - 50 51 52 53 54 55 56 57 58 59 - 60 61 62 63 64 65 66 67 68 69 - 70 71 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 88 89 - 90 91 92 93 94 95 96 97 98 99 - 100>; - default-brightness-level = <50>; - }; -}; - -&can1 { - status = "disabled"; -}; - -&can2 { - xceiver-supply = <®_3v3>; -}; - -&i2c3 { - polytouch1: eeti@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eeti>; - interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; - wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - wakeup-source; - }; -}; - -&ipu2 { - status = "disabled"; -}; - -&kpp { - status = "disabled"; /* pads partially clash with backlight1 PWM */ -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds0_timing1>; - - lvds0_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds0_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds0_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - lvds1: lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&lvds1_timing2>; - - lvds1_timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - lvds1_timing1: VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <31>; - vfront-porch = <12>; - hsync-len = <96>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - - lvds1_timing2: nl12880bc20 { - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <50>; - hfront-porch = <50>; - vback-porch = <5>; - vfront-porch = <5>; - hsync-len = <60>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&iomuxc { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; }; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index 16d5be1aeb3ce3f56c0c01fe93140e55b0355269..f5d9c34b0d392caca7b3b9e8aa8e6c40ab40de1b 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -188,6 +188,8 @@ /delete-node/&hdmi_mux_1; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmicec>; ddc-i2c-bus = <&i2c2>; status = "okay"; }; @@ -211,6 +213,12 @@ >; }; + pinctrl_hdmicec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hpd: hpdgrp { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts new file mode 100644 index 0000000000000000000000000000000000000000..e87ddb1686692619db9bcf6a277d740c03a6d8e5 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" + +/ { + model = "Wandboard i.MX6 Quad Board revD1"; + compatible = "wand,imx6q-wandboard", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 90a741732f606fc00c50cd755bb7c4858f60c031..bc581aa5cf1785fce20c8e46d5c9e2fddedca4d2 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -79,15 +79,15 @@ }; soc { - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@02000000 { /* AIPS1 */ - spba-bus@02000000 { - ecspi5: ecspi@02018000 { + aips-bus@2000000 { /* AIPS1 */ + spba-bus@2000000 { + ecspi5: ecspi@2018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -102,12 +102,12 @@ }; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6q-iomuxc"; }; }; - sata: sata@02200000 { + sata: sata@2200000 { compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; @@ -118,7 +118,7 @@ status = "disabled"; }; - gpu_vg: gpu@02204000 { + gpu_vg: gpu@2204000 { compatible = "vivante,gc"; reg = <0x02204000 0x4000>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; @@ -128,7 +128,7 @@ power-domains = <&pd_pu>; }; - ipu2: ipu@02800000 { + ipu2: ipu@2800000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ipu"; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index ea339fa58f4a5a99f1834778e926ce022f139cdd..e80fdca585f861c7e716666270770f2b77127871 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -222,7 +222,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -313,7 +313,7 @@ }; }; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 9cd2a7477ed76b20bd938319c0fcef35a5117395..829a479381798dc6ff5c5339f9138f80017fe6c5 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -54,7 +54,7 @@ stdout-path = &uart4; }; - display@di0 { + disp0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; @@ -209,7 +209,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index ad84eddb6836f070b0fafdf3581e6dcb37372bfc..fc66bbfd6796b2d46920bd79ae4b46fa4d8ae532 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -167,7 +167,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -248,7 +248,7 @@ }; }; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 885556260bd0737b2164967dcad8af83d44ef066..dea8fc43c692d3a32e4268f1bd32de36475db65e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -332,175 +332,173 @@ }; &iomuxc { - imx6qdl-gw51xx { - pinctrl_adv7180: adv7180grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0 - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0 - >; - }; + pinctrl_adv7180: adv7180grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - >; - }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 115d706228eff5067f6a536e049e07183a778631..363a44394dad76e13b3a7082414d61dba7790fc3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -303,7 +303,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -311,7 +311,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; @@ -423,213 +423,211 @@ }; &iomuxc { - imx6qdl-gw52xx { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_ecspi3: escpi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 - >; - }; + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 24be7965056c13d898d026eb852ba30db284b206..c75385c0cad050cff380463c461e23164f726f95 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -294,7 +294,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -302,7 +302,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; @@ -415,205 +415,203 @@ }; &iomuxc { - imx6qdl-gw53xx { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 4594b22791695436df2cd9ff372f332db74ad5c4..eab75f3dbaf324e0e250998bb6b2c2c9ff7a6391 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -223,7 +223,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -331,7 +331,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -339,7 +339,7 @@ VDDIO-supply = <®_3p3v>; }; - touchscreen: egalax_ts@04 { + touchscreen: egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; @@ -468,221 +468,219 @@ }; &iomuxc { - imx6qdl-gw54xx { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 - MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 - MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 - MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_ecspi2: escpi2grp { - fsl,pins = < - MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 - MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 - >; - }; + pinctrl_ecspi2: escpi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4_backlight: pwm4grpbacklight { - fsl,pins = < - /* LVDS_PWM J6.5 */ - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4_backlight: pwm4grpbacklight { + fsl,pins = < + /* LVDS_PWM J6.5 */ + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_pwm4_dio: pwm4grpdio { - fsl,pins = < - /* DIO3 J16.4 */ - MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 - >; - }; + pinctrl_pwm4_dio: pwm4grpdio { + fsl,pins = < + /* DIO3 J16.4 */ + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 405b40310ddf2828672e8c0d7245b42ea701ae80..30d4662d44801c69d7198fe76e562c323eeaea15 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -320,110 +320,108 @@ }; &iomuxc { - imx6qdl-gw51xx { - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 67613dd7cc926fa6d11c273dadfb1c8314365ad1..c67c106050705bc2879e62ee9a8048339de3068e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -270,105 +270,103 @@ }; &iomuxc { - imx6qdl-gw552x { - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - >; - }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 988334c889eb79986f51f12b27d23cbec46de61d..37c07c0748aaf99e57ceef90512331e8c7cdf39b 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -138,7 +138,7 @@ }; /* Pro baseboard model */ - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index 7ca291e9dbdb234b253d09b72fd1cb2a3f5aac71..b6220d62f6de0f48f2ba667f237d90e987f1bcf7 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -41,6 +41,7 @@ #include #include +#include / { memory { @@ -118,17 +119,77 @@ clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>; clock-names = "refclk"; }; -}; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack", + "Speaker", "Line Out Jack", + "Speaker", "Ext Spk"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; + + audmux_ssi1 { + fsl,audmux-port = ; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) + >; + }; + + audmux_aud4 { + fsl,audmux-port = ; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_3p3v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + xceiver-supply = <®_3p3v>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; }; &fec { @@ -174,6 +235,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + sgtl5000: codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; }; &pcie { @@ -184,6 +255,7 @@ }; &ssi1 { + fsl,mode = "i2s-slave"; status = "okay"; }; @@ -270,6 +342,20 @@ >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 56d0c5d21cd01b528eb09300bf0ba82156c64e83..a1b469c142f10d0e42d204005361a396987b0218 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -42,6 +42,7 @@ #include #include +#include / { memory { @@ -55,6 +56,25 @@ default-brightness-level = <7>; }; + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + + reg_2p5v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -87,6 +107,59 @@ #clock-cells = <0>; clock-frequency = <25000000>; /* 25MHz for example */ }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6qdl-icore-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack", + "Speaker", "Line Out Jack", + "Speaker", "Ext Spk"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + + audmux_ssi1 { + fsl,audmux-port = ; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) + >; + }; + + audmux_aud4 { + fsl,audmux-port = ; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; }; &can1 { @@ -141,6 +214,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + sgtl5000: codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; }; &pwm3 { @@ -149,6 +232,11 @@ status = "okay"; }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; @@ -178,6 +266,15 @@ }; &iomuxc { + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 6b81580623ff70ae494ee28a74b02c180503e23c..4cc4e23cf99c4e2f3f6317791b21d4dd2cf04ca1 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -255,7 +255,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; @@ -279,7 +279,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index b63134e3b51a078a44b65698b7db3707c9f0bcdd..3a77f0fedfce9d439ca04c8437107aa906ade469 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -256,7 +256,7 @@ status = "okay"; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -397,7 +397,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; @@ -429,7 +429,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index a24e4f1911abe77917726d8ff8342f7dcb88dab2..40942d6b94b366737b2c66177617a2f993ef9956 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -120,7 +120,7 @@ }; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -315,7 +315,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; @@ -347,7 +347,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index d309a4d0eb08b38c0ba551ee3652549421538eb5..4bdf29169d2a0e8193e8c41c481474d67398757f 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -197,7 +197,7 @@ status = "okay"; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -313,7 +313,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -340,7 +340,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touchscreen@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 5cf90c24c70791a2fc7c89a386b0ebe3e9fa3d17..6e9549ff11da965e2cead22f0e95dcffdd0f220a 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -121,7 +121,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 6a7594e5d183f92c5ed7df23466d2e4bc3e508f2..4fa2fac3877b5a5685d85654d44476a933c0e72b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -244,7 +244,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 756c5054f047724f7e12a1fad1ca98fde09f50c2..35de7adc997bf6f86ed047515bbaa2a09872b2c3 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -221,7 +221,7 @@ status = "okay"; }; - lcd_display: display@di0 { + lcd_display: disp0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; @@ -350,7 +350,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index b72b6fa475801df93fc1e0413eb4b6ea3179fb07..0a50705b9c1897101a1732cc4bc703ff907b5443 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -67,7 +67,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 19 0>; - regulator-always-on; enable-active-high; }; }; @@ -214,6 +213,8 @@ }; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; ddc-i2c-bus = <&i2c2>; status = "okay"; }; @@ -304,7 +305,7 @@ }; }; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -411,7 +412,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - egalax_ts@04 { + egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio6>; @@ -486,6 +487,12 @@ >; }; + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 @@ -651,6 +658,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..5102fc47380b0305cd5eb8be17b8b248c3e1b141 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi @@ -0,0 +1,252 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + turn-on-delay-ms = <35>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lcd_panel: lcd-panel { + compatible = "edt,etm0700g0dh6"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + backlight = <&backlight>; + bus-format-override = "rgb24"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_out>; + }; + }; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + u-boot,panel-name = "edt,et0350g0dh6"; + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + u-boot,panel-name = "edt,et0430g0dh6"; + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + CoMTFT { /* same as ET0700 but with inverted pixel clock */ + u-boot,panel-name = "edt,etm0700g0edh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_in>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..2ca2eb37e14fc8ad44a0724ccfe82c13940be64d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi @@ -0,0 +1,286 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + lvds0_panel: lvds0-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight0>; + power-supply = <®_3v3>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + lvds1_panel: lvds1-panel { + compatible = "nlt,nl12880bc20-spwg-24"; + backlight = <&backlight1>; + power-supply = <®_3v3>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + + display-timings { + hsd100pxn1 { + u-boot,panel-name = "hannstar,hsd100pxn1"; + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + u-boot,panel-name = "nlt,nl12880bc20-spwg-24"; + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0700 { + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + + display-timings { + hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +®_lcd0_pwr { + status = "okay"; +}; + +®_lcd1_pwr { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..4c4e2e1a931f8a965c24142fd04c2195a3224fc1 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi @@ -0,0 +1,99 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + backlight0 { + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + backlight1 { + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + turn-on-delay-ms = <35>; + power-supply = <®_lcd1_pwr>; + }; + + lcd-panel { + compatible = "edt,et057090dhu"; + bus-format-override = "rgb24"; + pixelclk-active = <0>; + }; + + lvds0-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; + + lvds1-panel { + compatible = "edt,etml1010g0dka"; + bus-format-override = "spwg-18"; + pixelclk-active = <0>; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ds1339 { + /* + * The backup voltage of the module internal RTC is not wired + * by default on the MB7, so disable that RTC chip. + */ + status = "disabled"; +}; + +&i2c3 { + rtc: mcp7940x@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +®_lcd0_pwr { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c6bec97fbeaf567c19046c8b39ec1f6dddbcdd5c..6abb66cd7d4ac43ee9d837413f02c73f631a9885 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann + * Copyright 2014-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,6 +43,7 @@ #include #include #include +#include / { aliases { @@ -145,7 +146,7 @@ pinctrl-0 = <&pinctrl_lcd0_pwr>; gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_lcd1_pwr: regulator-lcd1-pwr { @@ -157,7 +158,7 @@ pinctrl-0 = <&pinctrl_lcd1_pwr>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-boot-on; + status = "disabled"; }; reg_usbh1_vbus: regulator-usbh1-vbus { @@ -183,24 +184,56 @@ }; sound { - compatible = "karo,imx6qdl-tx6qdl-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "sgtl5000-audio"; + compatible = "karo,imx6qdl-tx6-sgtl5000", + "simple-audio-card"; + simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - ssi-controller = <&ssi1>; - audio-codec = <&sgtl5000>; - audio-routing = + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <5>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &can1 { @@ -241,7 +274,7 @@ &fec { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; + pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, @@ -249,6 +282,7 @@ clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + phy-reset-post-delay = <10>; phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; @@ -261,8 +295,9 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_mdio>; - interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_etnphy_int>; + interrupt-parent = <&gpio7>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -276,25 +311,34 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; ds1339: rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; + trickle-resistor-ohms = <250>; + trickle-diode-disable; }; }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; - sgtl5000: sgtl5000@0a { + sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; reg = <0x0a>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; @@ -332,8 +376,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ >; }; @@ -451,12 +493,24 @@ >; }; + pinctrl_etnphy_int: etnphy-intgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + >; + }; + pinctrl_etnphy_power: etnphy-pwrgrp { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ >; }; + pinctrl_etnphy_rst: etnphy-rstgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 @@ -504,6 +558,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -511,6 +572,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3-gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + pinctrl_kpp: kppgrp { fsl,pins = < MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..6d8d9ca966460a162a7bd0513db9862be5be4560 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -0,0 +1,196 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "imx6qdl-wandboard.dtsi" + +/ { + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed"; + regulator-name = "ETH_PHY"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 13 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&fec { + phy-supply = <®_eth_phy>; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-wandboard { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index b4fa7f1d63da1e54b3a09108ff74fc0b80d7ccfb..ed96d7b5feabdb276de7f0750c25c5dba26d6c1c 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -82,7 +82,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index eeb7679fd348a4932d123a8bd7ec76fb5107cc63..7812fbac963c933f7247af8172a8bb17704761e0 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -390,7 +390,7 @@ clock-frequency = <100000>; status = "okay"; - pmic@08 { + pmic@8 { compatible = "fsl,pfuze100"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pfuze100_irq>; @@ -543,7 +543,7 @@ rmi4-f01@1 { reg = <0x1>; - syna,nosleep-mode = <1>; + syna,nosleep-mode = <2>; }; rmi4-f11@11 { @@ -728,6 +728,7 @@ &usbh1 { vbus-supply = <®_5p0v_main>; + disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 8884b4a3cafb6f979189ba4be89295ad3777bfee..1ce4eabf05904c21e0e8501795fe2927cab3c0bb 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -87,7 +87,7 @@ interrupt-parent = <&gpc>; ranges; - dma_apbh: dma-apbh@00110000 { + dma_apbh: dma-apbh@110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, @@ -100,7 +100,7 @@ clocks = <&clks IMX6QDL_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@00112000 { + gpmi: gpmi-nand@112000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -120,7 +120,7 @@ status = "disabled"; }; - hdmi: hdmi@0120000 { + hdmi: hdmi@120000 { #address-cells = <1>; #size-cells = <0>; reg = <0x00120000 0x9000>; @@ -148,7 +148,7 @@ }; }; - gpu_3d: gpu@00130000 { + gpu_3d: gpu@130000 { compatible = "vivante,gc"; reg = <0x00130000 0x4000>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; @@ -159,7 +159,7 @@ power-domains = <&pd_pu>; }; - gpu_2d: gpu@00134000 { + gpu_2d: gpu@134000 { compatible = "vivante,gc"; reg = <0x00134000 0x4000>; interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; @@ -169,7 +169,7 @@ power-domains = <&pd_pu>; }; - timer@00a00600 { + timer@a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; @@ -177,7 +177,7 @@ clocks = <&clks IMX6QDL_CLK_TWD>; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -186,7 +186,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@00a02000 { + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -229,21 +229,21 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; - aips-bus@02000000 { /* AIPS1 */ + aips-bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba-bus@02000000 { + spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - spdif: spdif@02004000 { + spdif: spdif@2004000 { compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; @@ -263,7 +263,7 @@ status = "disabled"; }; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -277,7 +277,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -291,7 +291,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -305,7 +305,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -319,7 +319,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; @@ -331,7 +331,7 @@ status = "disabled"; }; - esai: esai@02024000 { + esai: esai@2024000 { #sound-dai-cells = <0>; compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; @@ -347,7 +347,7 @@ status = "disabled"; }; - ssi1: ssi@02028000 { + ssi1: ssi@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; @@ -363,7 +363,7 @@ status = "disabled"; }; - ssi2: ssi@0202c000 { + ssi2: ssi@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; @@ -379,7 +379,7 @@ status = "disabled"; }; - ssi3: ssi@02030000 { + ssi3: ssi@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; @@ -395,7 +395,7 @@ status = "disabled"; }; - asrc: asrc@02034000 { + asrc: asrc@2034000 { compatible = "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; @@ -420,12 +420,12 @@ status = "okay"; }; - spba@0203c000 { + spba@203c000 { reg = <0x0203c000 0x4000>; }; }; - vpu: vpu@02040000 { + vpu: vpu@2040000 { compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, @@ -439,11 +439,11 @@ iram = <&ocram>; }; - aipstz@0207c000 { /* AIPSTZ1 */ + aipstz@207c000 { /* AIPSTZ1 */ reg = <0x0207c000 0x4000>; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; @@ -454,7 +454,7 @@ status = "disabled"; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; @@ -465,7 +465,7 @@ status = "disabled"; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; @@ -476,7 +476,7 @@ status = "disabled"; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { #pwm-cells = <2>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; @@ -487,7 +487,7 @@ status = "disabled"; }; - can1: flexcan@02090000 { + can1: flexcan@2090000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; @@ -497,7 +497,7 @@ status = "disabled"; }; - can2: flexcan@02094000 { + can2: flexcan@2094000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; @@ -507,7 +507,7 @@ status = "disabled"; }; - gpt: gpt@02098000 { + gpt: gpt@2098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -517,7 +517,7 @@ clock-names = "ipg", "per", "osc_per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>, @@ -528,7 +528,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>, @@ -539,7 +539,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>, @@ -550,7 +550,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>, @@ -561,7 +561,7 @@ #interrupt-cells = <2>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>, @@ -572,7 +572,7 @@ #interrupt-cells = <2>; }; - gpio6: gpio@020b0000 { + gpio6: gpio@20b0000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b0000 0x4000>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>, @@ -583,7 +583,7 @@ #interrupt-cells = <2>; }; - gpio7: gpio@020b4000 { + gpio7: gpio@20b4000 { compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; reg = <0x020b4000 0x4000>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>, @@ -594,7 +594,7 @@ #interrupt-cells = <2>; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -602,14 +602,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_DUMMY>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -617,7 +617,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -625,7 +625,7 @@ #clock-cells = <1>; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, @@ -737,7 +737,7 @@ clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; @@ -745,7 +745,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; @@ -753,7 +753,7 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -775,17 +775,17 @@ }; }; - epit1: epit@020d0000 { /* EPIT1 */ + epit1: epit@20d0000 { /* EPIT1 */ reg = <0x020d0000 0x4000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; }; - epit2: epit@020d4000 { /* EPIT2 */ + epit2: epit@20d4000 { /* EPIT2 */ reg = <0x020d4000 0x4000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6q-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -793,7 +793,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -826,9 +826,9 @@ }; }; - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; - reg = <0x020e0000 0x38>; + reg = <0x20e0000 0x38>; mux: mux-controller { compatible = "mmio-mux"; @@ -836,9 +836,9 @@ }; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; - reg = <0x020e0000 0x4000>; + reg = <0x20e0000 0x4000>; }; ldb: ldb { @@ -895,17 +895,17 @@ }; }; - dcic1: dcic@020e4000 { + dcic1: dcic@20e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; }; - dcic2: dcic@020e8000 { + dcic2: dcic@20e8000 { reg = <0x020e8000 0x4000>; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; @@ -917,7 +917,7 @@ }; }; - aips-bus@02100000 { /* AIPS2 */ + aips-bus@2100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -950,11 +950,11 @@ }; }; - aipstz@0217c000 { /* AIPSTZ2 */ + aipstz@217c000 { /* AIPSTZ2 */ reg = <0x0217c000 0x4000>; }; - usbotg: usb@02184000 { + usbotg: usb@2184000 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; @@ -967,7 +967,7 @@ status = "disabled"; }; - usbh1: usb@02184200 { + usbh1: usb@2184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; @@ -981,7 +981,7 @@ status = "disabled"; }; - usbh2: usb@02184400 { + usbh2: usb@2184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; @@ -994,7 +994,7 @@ status = "disabled"; }; - usbh3: usb@02184600 { + usbh3: usb@2184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; @@ -1007,14 +1007,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks IMX6QDL_CLK_USBOH3>; }; - fec: ethernet@02188000 { + fec: ethernet@2188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts-extended = @@ -1027,14 +1027,14 @@ status = "disabled"; }; - mlb@0218c000 { + mlb@218c000 { reg = <0x0218c000 0x4000>; interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>, <0 117 IRQ_TYPE_LEVEL_HIGH>, <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -1046,7 +1046,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -1058,7 +1058,7 @@ status = "disabled"; }; - usdhc3: usdhc@02198000 { + usdhc3: usdhc@2198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -1070,7 +1070,7 @@ status = "disabled"; }; - usdhc4: usdhc@0219c000 { + usdhc4: usdhc@219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; @@ -1082,7 +1082,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -1092,7 +1092,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -1102,7 +1102,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -1112,20 +1112,20 @@ status = "disabled"; }; - romcp@021ac000 { + romcp@21ac000 { reg = <0x021ac000 0x4000>; }; - mmdc0: mmdc@021b0000 { /* MMDC0 */ + mmdc0: mmdc@21b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - mmdc1: mmdc@021b4000 { /* MMDC1 */ + mmdc1: mmdc@21b4000 { /* MMDC1 */ reg = <0x021b4000 0x4000>; }; - weim: weim@021b8000 { + weim: weim@21b8000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx6q-weim"; @@ -1136,29 +1136,29 @@ status = "disabled"; }; - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; }; - tzasc@021d0000 { /* TZASC1 */ + tzasc@21d0000 { /* TZASC1 */ reg = <0x021d0000 0x4000>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; }; - tzasc@021d4000 { /* TZASC2 */ + tzasc@21d4000 { /* TZASC2 */ reg = <0x021d4000 0x4000>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; }; - audmux: audmux@021d8000 { + audmux: audmux@21d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; }; - mipi_csi: mipi@021dc000 { + mipi_csi: mipi@21dc000 { compatible = "fsl,imx6-mipi-csi2"; reg = <0x021dc000 0x4000>; #address-cells = <1>; @@ -1171,7 +1171,7 @@ status = "disabled"; }; - mipi_dsi: mipi@021e0000 { + mipi_dsi: mipi@21e0000 { #address-cells = <1>; #size-cells = <0>; reg = <0x021e0000 0x4000>; @@ -1199,14 +1199,14 @@ }; }; - vdoa@021e4000 { + vdoa@21e4000 { compatible = "fsl,imx6q-vdoa"; reg = <0x021e4000 0x4000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_VDOA>; }; - uart2: serial@021e8000 { + uart2: serial@21e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; @@ -1218,7 +1218,7 @@ status = "disabled"; }; - uart3: serial@021ec000 { + uart3: serial@21ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; @@ -1230,7 +1230,7 @@ status = "disabled"; }; - uart4: serial@021f0000 { + uart4: serial@21f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; @@ -1242,7 +1242,7 @@ status = "disabled"; }; - uart5: serial@021f4000 { + uart5: serial@21f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; @@ -1255,7 +1255,7 @@ }; }; - ipu1: ipu@02400000 { + ipu1: ipu@2400000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ipu"; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..92b38e6699aafca6e9205f547880eb910b78f810 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8037.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts new file mode 100644 index 0000000000000000000000000000000000000000..ffc0f2ee11d2378bc82904149ac1c7168477fc22 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts @@ -0,0 +1,86 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lcd.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8037 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts new file mode 100644 index 0000000000000000000000000000000000000000..07ad70718aec59fe2bd60bcf79311f0300168a1c --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp-tx6qp-8137.dts" +#include "imx6qdl-tx6-mb7.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts new file mode 100644 index 0000000000000000000000000000000000000000..dd494d587014ec627d1a745002fa015ccd0f3f03 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts @@ -0,0 +1,90 @@ +/* + * Copyright 2017 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-tx6.dtsi" +#include "imx6qdl-tx6-lvds.dtsi" + +/ { + model = "Ka-Ro electronics TX6QP-8137 Module"; + compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp"; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu2 { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts new file mode 100644 index 0000000000000000000000000000000000000000..f7badd82ce8a9b4ba251d4e2ef0f2dbcf0280759 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" + +/ { + model = "Wandboard i.MX6 QuadPlus Board revD1"; + compatible = "wand,imx6qp-wandboard", "fsl,imx6qp"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 299d863690c5dbbaded0a3b1bf05de9002b7cd3d..5f4fdce715c1941e24cab61074bfc8005db03a03 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -44,19 +44,19 @@ / { soc { - ocram2: sram@00940000 { + ocram2: sram@940000 { compatible = "mmio-sram"; reg = <0x00940000 0x20000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - ocram3: sram@00960000 { + ocram3: sram@960000 { compatible = "mmio-sram"; reg = <0x00960000 0x20000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@02100000 { + aips-bus@2100000 { pre1: pre@21c8000 { compatible = "fsl,imx6qp-pre"; reg = <0x021c8000 0x1000>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 0a90eea17018aceed3268d3969de1cb7bbd2f435..60600b4cf5fed80b8426d47f688d583cb357881b 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -145,7 +145,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3f76f980947ed6ecd88cb5a8b48cbfc3dc5bd63b..3ea1a41893c8bb578b7a7d0056bfbe32e2861246 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -76,7 +76,7 @@ }; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -109,13 +109,13 @@ interrupt-parent = <&gpc>; ranges; - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; clocks = <&clks IMX6SL_CLK_OCRAM>; }; - L2: l2-cache@00a02000 { + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -130,21 +130,21 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; - aips1: aips-bus@02000000 { + aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba: spba-bus@02000000 { + spba: spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - spdif: spdif@02004000 { + spdif: spdif@2004000 { compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; @@ -165,7 +165,7 @@ status = "disabled"; }; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -177,7 +177,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -189,7 +189,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -201,7 +201,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -213,7 +213,7 @@ status = "disabled"; }; - uart5: serial@02018000 { + uart5: serial@2018000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; @@ -226,7 +226,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; @@ -239,7 +239,7 @@ status = "disabled"; }; - uart2: serial@02024000 { + uart2: serial@2024000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02024000 0x4000>; @@ -252,7 +252,7 @@ status = "disabled"; }; - ssi1: ssi@02028000 { + ssi1: ssi@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; @@ -268,7 +268,7 @@ status = "disabled"; }; - ssi2: ssi@0202c000 { + ssi2: ssi@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; @@ -284,7 +284,7 @@ status = "disabled"; }; - ssi3: ssi@02030000 { + ssi3: ssi@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; @@ -300,7 +300,7 @@ status = "disabled"; }; - uart3: serial@02034000 { + uart3: serial@2034000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02034000 0x4000>; @@ -313,7 +313,7 @@ status = "disabled"; }; - uart4: serial@02038000 { + uart4: serial@2038000 { compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02038000 0x4000>; @@ -327,7 +327,7 @@ }; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; @@ -337,7 +337,7 @@ clock-names = "ipg", "per"; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; @@ -347,7 +347,7 @@ clock-names = "ipg", "per"; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; @@ -357,7 +357,7 @@ clock-names = "ipg", "per"; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { #pwm-cells = <2>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; @@ -367,7 +367,7 @@ clock-names = "ipg", "per"; }; - gpt: gpt@02098000 { + gpt: gpt@2098000 { compatible = "fsl,imx6sl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -376,7 +376,7 @@ clock-names = "ipg", "per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>, @@ -393,7 +393,7 @@ <&iomuxc 27 64 4>, <&iomuxc 31 52 1>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>, @@ -411,7 +411,7 @@ <&iomuxc 23 125 7>, <&iomuxc 30 110 2>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>, @@ -430,7 +430,7 @@ <&iomuxc 31 102 1>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>, @@ -456,7 +456,7 @@ <&iomuxc 30 152 1>, <&iomuxc 31 156 1>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>, @@ -478,7 +478,7 @@ <&iomuxc 21 161 1>; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -486,14 +486,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_DUMMY>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -501,7 +501,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6sl-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -509,7 +509,7 @@ #clock-cells = <1>; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6sl-anatop", "fsl,imx6q-anatop", "syscon", "simple-bus"; @@ -623,7 +623,7 @@ clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; @@ -631,7 +631,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; @@ -639,7 +639,7 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -661,17 +661,17 @@ }; }; - epit1: epit@020d0000 { + epit1: epit@20d0000 { reg = <0x020d0000 0x4000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; }; - epit2: epit@020d4000 { + epit2: epit@20d4000 { reg = <0x020d4000 0x4000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6sl-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, @@ -679,7 +679,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -692,28 +692,28 @@ #power-domain-cells = <1>; }; - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6sl-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6sl-iomuxc"; reg = <0x020e0000 0x4000>; }; - csi: csi@020e4000 { + csi: csi@20e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; - spdc: spdc@020e8000 { + spdc: spdc@20e8000 { reg = <0x020e8000 0x4000>; interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; @@ -725,17 +725,17 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; - pxp: pxp@020f0000 { + pxp: pxp@20f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; }; - epdc: epdc@020f4000 { + epdc: epdc@20f4000 { reg = <0x020f4000 0x4000>; interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; }; - lcdif: lcdif@020f8000 { + lcdif: lcdif@20f8000 { compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; @@ -746,7 +746,7 @@ status = "disabled"; }; - dcp: dcp@020fc000 { + dcp: dcp@20fc000 { compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, @@ -755,14 +755,14 @@ }; }; - aips2: aips-bus@02100000 { + aips2: aips-bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - usbotg1: usb@02184000 { + usbotg1: usb@2184000 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; @@ -775,7 +775,7 @@ status = "disabled"; }; - usbotg2: usb@02184200 { + usbotg2: usb@2184200 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; @@ -788,7 +788,7 @@ status = "disabled"; }; - usbh: usb@02184400 { + usbh: usb@2184400 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; @@ -801,14 +801,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks IMX6SL_CLK_USBOH3>; }; - fec: ethernet@02188000 { + fec: ethernet@2188000 { compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; reg = <0x02188000 0x4000>; interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; @@ -818,7 +818,7 @@ status = "disabled"; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -830,7 +830,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -842,7 +842,7 @@ status = "disabled"; }; - usdhc3: usdhc@02198000 { + usdhc3: usdhc@2198000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -854,7 +854,7 @@ status = "disabled"; }; - usdhc4: usdhc@0219c000 { + usdhc4: usdhc@219c000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; @@ -866,7 +866,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; @@ -876,7 +876,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; @@ -886,7 +886,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; @@ -896,17 +896,17 @@ status = "disabled"; }; - mmdc: mmdc@021b0000 { + mmdc: mmdc@21b0000 { compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - rngb: rngb@021b4000 { + rngb: rngb@21b4000 { reg = <0x021b4000 0x4000>; interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; }; - weim: weim@021b8000 { + weim: weim@21b8000 { #address-cells = <2>; #size-cells = <1>; reg = <0x021b8000 0x4000>; @@ -915,13 +915,13 @@ status = "disabled"; }; - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SL_CLK_OCOTP>; }; - audmux: audmux@021d8000 { + audmux: audmux@21d8000 { compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index c5578d1c1ee4d126a2b2f156af02b0a4f29a1888..f9d40ee149824186442a0d4d8352f4ed9d59aaf1 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -231,7 +231,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 71005478cdf06f29e9a0f4a04215e02d32fdba22..e3533e74ccc84bbaa0dbf82aae7d9f5c408102dc 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -18,7 +18,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index c0139d7e497ab3b525f3de8a891e6b47f1eb4dfa..6dd9bebfe027834fe445fad8408280e9cbf51ef3 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -18,7 +18,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze200"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts new file mode 100644 index 0000000000000000000000000000000000000000..4d8c6521845fd74849fcb7029fc03ec3f47a806c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -0,0 +1,572 @@ +/* + * Copyright (C) 2016 Christoph Fritz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sx.dtsi" + +/ { + model = "Softing VIN|ING 2000"; + compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg1_vbus: regulator-usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_peri_3v3: regulator-peri_3v3 { + compatible = "regulator-fixed"; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pwmleds { + compatible = "pwm-leds"; + + red { + label = "red"; + max-brightness = <255>; + pwms = <&pwm6 0 50000>; + }; + + green { + label = "green"; + max-brightness = <255>; + pwms = <&pwm2 0 50000>; + }; + + blue { + label = "blue"; + max-brightness = <255>; + pwms = <&pwm1 0 50000>; + }; + }; +}; + +&adc1 { + vref-supply = <®_peri_3v3>; + status = "okay"; +}; + +&cpu0 { + /* + * This board has a shared rail of reg_arm and reg_soc (supplied by + * sw1a_reg) which is modeled below, but still this module behaves + * unstable without higher voltages. Hence, set higher voltages here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet0-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet1-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + proximity: sx9500@28 { + compatible = "semtech,sx9500"; + reg = <0x28>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx9500>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + }; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x130b1 + MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x130b1 + MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x130b1 + MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x30b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x30c1 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x30c1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0f9 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0f9 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x30c1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0f9 + MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0f9 + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x10b0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x1b0b0 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x1b0b0 + MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_COL__ENET2_MDC 0xa0f9 + MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x10b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + /* reset external uC */ + MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x10b0 + /* IRQ from external uC */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x10b0 + /* overcurrent detection */ + MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x10b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_NAND_ALE__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_NAND_CLE__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp-1 { + fsl,pins = < + /* blue LED */ + MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp-1 { + fsl,pins = < + /* green LED */ + MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm6: pwm6grp-1 { + fsl,pins = < + /* red LED */ + MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1 + >; + }; + + pinctrl_sx9500: sx9500grp { + fsl,pins = < + /* Reset */ + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x838 + /* IRQ */ + MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x70e0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2_50mhz: usdhc2grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x1b000 + MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x10b0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170b9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170b9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170b9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170f9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170f9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170f9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc4_50mhz: usdhc4grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059 + MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_soc { + vin-supply = <&sw1a_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_50mhz>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc4 { + /* hs200-mode is currently unsupported because Vccq is on 3.1V, but + * not on necessary 1.8V. + */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4_50mhz>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + bus-width = <8>; + keep-power-in-suspend; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index dcfc9759143375decd12bea87ad5e7547837f3bd..53b3eac94f0de605606260e111c7980887349d3c 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -135,7 +135,7 @@ clock-frequency = <100000>; status = "okay"; - pmic: pmic@08 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 6c7eb54be9e2a4912d27cd4dcc2803a338390323..5b03ba3beda9e91d47d1bf7ad8e5ed25fc1f347d 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -95,7 +95,7 @@ }; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -153,13 +153,13 @@ interrupts = ; }; - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; clocks = <&clks IMX6SX_CLK_OCRAM>; }; - L2: l2-cache@00a02000 { + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = ; @@ -169,7 +169,7 @@ arm,data-latency = <4 2 3>; }; - gpu: gpu@01800000 { + gpu: gpu@1800000 { compatible = "vivante,gc"; reg = <0x01800000 0x4000>; interrupts = ; @@ -179,7 +179,7 @@ clock-names = "bus", "core", "shader"; }; - dma_apbh: dma-apbh@01804000 { + dma_apbh: dma-apbh@1804000 { compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = , @@ -192,7 +192,7 @@ clocks = <&clks IMX6SX_CLK_APBH_DMA>; }; - gpmi: gpmi-nand@01806000{ + gpmi: gpmi-nand@1806000{ compatible = "fsl,imx6sx-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -212,21 +212,21 @@ status = "disabled"; }; - aips1: aips-bus@02000000 { + aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba-bus@02000000 { + spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - spdif: spdif@02004000 { + spdif: spdif@2004000 { compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = ; @@ -248,7 +248,7 @@ status = "disabled"; }; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -260,7 +260,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -272,7 +272,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -284,7 +284,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -296,7 +296,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; @@ -309,7 +309,7 @@ status = "disabled"; }; - esai: esai@02024000 { + esai: esai@2024000 { reg = <0x02024000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_ESAI_IPG>, @@ -322,7 +322,7 @@ status = "disabled"; }; - ssi1: ssi@02028000 { + ssi1: ssi@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; @@ -336,7 +336,7 @@ status = "disabled"; }; - ssi2: ssi@0202c000 { + ssi2: ssi@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; @@ -350,7 +350,7 @@ status = "disabled"; }; - ssi3: ssi@02030000 { + ssi3: ssi@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; @@ -364,7 +364,7 @@ status = "disabled"; }; - asrc: asrc@02034000 { + asrc: asrc@2034000 { reg = <0x02034000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_ASRC_MEM>, @@ -381,7 +381,7 @@ }; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = ; @@ -391,7 +391,7 @@ #pwm-cells = <2>; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = ; @@ -401,7 +401,7 @@ #pwm-cells = <2>; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = ; @@ -411,7 +411,7 @@ #pwm-cells = <2>; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = ; @@ -421,7 +421,7 @@ #pwm-cells = <2>; }; - flexcan1: can@02090000 { + flexcan1: can@2090000 { compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = ; @@ -431,7 +431,7 @@ status = "disabled"; }; - flexcan2: can@02094000 { + flexcan2: can@2094000 { compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = ; @@ -441,7 +441,7 @@ status = "disabled"; }; - gpt: gpt@02098000 { + gpt: gpt@2098000 { compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = ; @@ -450,7 +450,7 @@ clock-names = "ipg", "per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = , @@ -462,7 +462,7 @@ gpio-ranges = <&iomuxc 0 5 26>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = , @@ -474,7 +474,7 @@ gpio-ranges = <&iomuxc 0 31 20>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = , @@ -486,7 +486,7 @@ gpio-ranges = <&iomuxc 0 51 29>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = , @@ -498,7 +498,7 @@ gpio-ranges = <&iomuxc 0 80 32>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = , @@ -510,7 +510,7 @@ gpio-ranges = <&iomuxc 0 112 24>; }; - gpio6: gpio@020b0000 { + gpio6: gpio@20b0000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020b0000 0x4000>; interrupts = , @@ -522,7 +522,7 @@ gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>; }; - gpio7: gpio@020b4000 { + gpio7: gpio@20b4000 { compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; reg = <0x020b4000 0x4000>; interrupts = , @@ -534,7 +534,7 @@ gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = ; @@ -542,14 +542,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_DUMMY>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = ; @@ -557,7 +557,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6sx-ccm"; reg = <0x020c4000 0x4000>; interrupts = , @@ -567,7 +567,7 @@ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; @@ -675,11 +675,12 @@ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; interrupts = ; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = ; @@ -687,7 +688,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = ; @@ -695,7 +696,7 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -724,17 +725,17 @@ }; }; - epit1: epit@020d0000 { + epit1: epit@20d0000 { reg = <0x020d0000 0x4000>; interrupts = ; }; - epit2: epit@020d4000 { + epit2: epit@20d4000 { reg = <0x020d4000 0x4000>; interrupts = ; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6sx-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , @@ -742,7 +743,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -751,18 +752,18 @@ interrupt-parent = <&intc>; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6sx-iomuxc"; reg = <0x020e0000 0x4000>; }; - gpr: iomuxc-gpr@020e4000 { + gpr: iomuxc-gpr@20e4000 { compatible = "fsl,imx6sx-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e4000 0x4000>; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = ; @@ -775,7 +776,7 @@ }; }; - aips2: aips-bus@02100000 { + aips2: aips-bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -809,7 +810,7 @@ }; }; - usbotg1: usb@02184000 { + usbotg1: usb@2184000 { compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = ; @@ -823,7 +824,7 @@ status = "disabled"; }; - usbotg2: usb@02184200 { + usbotg2: usb@2184200 { compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = ; @@ -836,7 +837,7 @@ status = "disabled"; }; - usbh: usb@02184400 { + usbh: usb@2184400 { compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = ; @@ -851,14 +852,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks IMX6SX_CLK_USBOH3>; }; - fec1: ethernet@02188000 { + fec1: ethernet@2188000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = , @@ -875,7 +876,7 @@ status = "disabled"; }; - mlb: mlb@0218c000 { + mlb: mlb@218c000 { reg = <0x0218c000 0x4000>; interrupts = , , @@ -884,7 +885,7 @@ status = "disabled"; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -896,7 +897,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; @@ -908,7 +909,7 @@ status = "disabled"; }; - usdhc3: usdhc@02198000 { + usdhc3: usdhc@2198000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02198000 0x4000>; interrupts = ; @@ -920,7 +921,7 @@ status = "disabled"; }; - usdhc4: usdhc@0219c000 { + usdhc4: usdhc@219c000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x0219c000 0x4000>; interrupts = ; @@ -932,7 +933,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -942,7 +943,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -952,7 +953,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -962,12 +963,12 @@ status = "disabled"; }; - mmdc: mmdc@021b0000 { + mmdc: mmdc@21b0000 { compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - fec2: ethernet@021b4000 { + fec2: ethernet@21b4000 { compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x021b4000 0x4000>; interrupts = , @@ -982,7 +983,7 @@ status = "disabled"; }; - weim: weim@021b8000 { + weim: weim@21b8000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; @@ -993,13 +994,23 @@ status = "disabled"; }; - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx6sx-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SX_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; - sai1: sai@021d4000 { + sai1: sai@21d4000 { compatible = "fsl,imx6sx-sai"; reg = <0x021d4000 0x4000>; interrupts = ; @@ -1012,13 +1023,13 @@ status = "disabled"; }; - audmux: audmux@021d8000 { + audmux: audmux@21d8000 { compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; }; - sai2: sai@021dc000 { + sai2: sai@21dc000 { compatible = "fsl,imx6sx-sai"; reg = <0x021dc000 0x4000>; interrupts = ; @@ -1031,7 +1042,7 @@ status = "disabled"; }; - qspi1: qspi@021e0000 { + qspi1: qspi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1044,7 +1055,7 @@ status = "disabled"; }; - qspi2: qspi@021e4000 { + qspi2: qspi@21e4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1057,7 +1068,7 @@ status = "disabled"; }; - uart2: serial@021e8000 { + uart2: serial@21e8000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; @@ -1070,7 +1081,7 @@ status = "disabled"; }; - uart3: serial@021ec000 { + uart3: serial@21ec000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; @@ -1083,7 +1094,7 @@ status = "disabled"; }; - uart4: serial@021f0000 { + uart4: serial@21f0000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; @@ -1096,7 +1107,7 @@ status = "disabled"; }; - uart5: serial@021f4000 { + uart5: serial@21f4000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; @@ -1109,7 +1120,7 @@ status = "disabled"; }; - i2c4: i2c@021f8000 { + i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; @@ -1120,21 +1131,21 @@ }; }; - aips3: aips-bus@02200000 { + aips3: aips-bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02200000 0x100000>; ranges; - spba-bus@02200000 { + spba-bus@2200000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02240000 0x40000>; ranges; - csi1: csi@02214000 { + csi1: csi@2214000 { reg = <0x02214000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, @@ -1144,7 +1155,7 @@ status = "disabled"; }; - pxp: pxp@02218000 { + pxp: pxp@2218000 { reg = <0x02218000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_PXP_AXI>, @@ -1153,7 +1164,7 @@ status = "disabled"; }; - csi2: csi@0221c000 { + csi2: csi@221c000 { reg = <0x0221c000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, @@ -1163,7 +1174,7 @@ status = "disabled"; }; - lcdif1: lcdif@02220000 { + lcdif1: lcdif@2220000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; interrupts = ; @@ -1174,7 +1185,7 @@ status = "disabled"; }; - lcdif2: lcdif@02224000 { + lcdif2: lcdif@2224000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; interrupts = ; @@ -1185,7 +1196,7 @@ status = "disabled"; }; - vadc: vadc@02228000 { + vadc: vadc@2228000 { reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; reg-names = "vadc-vafe", "vadc-vdec"; clocks = <&clks IMX6SX_CLK_VADC>, @@ -1195,7 +1206,7 @@ }; }; - adc1: adc@02280000 { + adc1: adc@2280000 { compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; reg = <0x02280000 0x4000>; interrupts = ; @@ -1206,7 +1217,7 @@ status = "disabled"; }; - adc2: adc@02284000 { + adc2: adc@2284000 { compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; reg = <0x02284000 0x4000>; interrupts = ; @@ -1217,7 +1228,7 @@ status = "disabled"; }; - wdog3: wdog@02288000 { + wdog3: wdog@2288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x02288000 0x4000>; interrupts = ; @@ -1225,7 +1236,7 @@ status = "disabled"; }; - ecspi5: ecspi@0228c000 { + ecspi5: ecspi@228c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -1237,7 +1248,7 @@ status = "disabled"; }; - uart6: serial@022a0000 { + uart6: serial@22a0000 { compatible = "fsl,imx6sx-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x022a0000 0x4000>; @@ -1250,7 +1261,7 @@ status = "disabled"; }; - pwm5: pwm@022a4000 { + pwm5: pwm@22a4000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x022a4000 0x4000>; interrupts = ; @@ -1260,7 +1271,7 @@ #pwm-cells = <2>; }; - pwm6: pwm@022a8000 { + pwm6: pwm@22a8000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x022a8000 0x4000>; interrupts = ; @@ -1270,7 +1281,7 @@ #pwm-cells = <2>; }; - pwm7: pwm@022ac000 { + pwm7: pwm@22ac000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x022ac000 0x4000>; interrupts = ; @@ -1280,7 +1291,7 @@ #pwm-cells = <2>; }; - pwm8: pwm@0022b0000 { + pwm8: pwm@22b0000 { compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; reg = <0x0022b0000 0x4000>; interrupts = ; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 9c23e017d86ad9194d48d7ef3bdb767210fd8dee..e5d3ef88be608562b057ba1fa337bd04f7ed08e0 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -147,6 +147,8 @@ &lcdif { + assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 7d7254b12a7563788ff85812437d8f5dab79336b..3bf26ebd4df9fa3b63bb28e7bf2c713caa0609e0 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -175,7 +175,7 @@ reg = <1>; max-speed = <100>; interrupt-parent = <&gpio5>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -186,7 +186,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -223,7 +223,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { reg = <0x0a>; compatible = "fsl,sgtl5000"; clocks = <&sys_mclk>; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index 28d055e3f3010fef8964f1aad5606cca1824e2e5..2d80f7b50bc03bce0ddc66d855ac4f8199644353 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -116,7 +116,7 @@ }; &i2c2 { - /delete-node/ codec@0a; + /delete-node/ codec@a; /delete-node/ touchscreen@48; rtc: mcp7940x@6f { diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index ec745eb3b6a853b1aab6eb7faab14c30e68bcdf7..65111f9843f4eaf715f0446e6ba8f70389c38cc1 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -362,7 +362,7 @@ clock-frequency = <400000>; status = "okay"; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; #sound-dai-cells = <0>; @@ -424,7 +424,7 @@ display = <&display>; status = "okay"; - display: display@di0 { + display: disp0 { bits-per-pixel = <32>; bus-width = <24>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f11a241a340d52b6cf95b184b69696e13e29c88d..d5181f85ca9cafbba955ca1a3a6e5fbaedf9248f 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -98,7 +98,7 @@ }; }; - intc: interrupt-controller@00a01000 { + intc: interrupt-controller@a01000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -149,12 +149,12 @@ status = "disabled"; }; - ocram: sram@00900000 { + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; }; - dma_apbh: dma-apbh@01804000 { + dma_apbh: dma-apbh@1804000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, @@ -167,7 +167,7 @@ clocks = <&clks IMX6UL_CLK_APBHDMA>; }; - gpmi: gpmi-nand@01806000 { + gpmi: gpmi-nand@1806000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -187,21 +187,21 @@ status = "disabled"; }; - aips1: aips-bus@02000000 { + aips1: aips-bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; - spba-bus@02000000 { + spba-bus@2000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02000000 0x40000>; ranges; - ecspi1: ecspi@02008000 { + ecspi1: ecspi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -213,7 +213,7 @@ status = "disabled"; }; - ecspi2: ecspi@0200c000 { + ecspi2: ecspi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -225,7 +225,7 @@ status = "disabled"; }; - ecspi3: ecspi@02010000 { + ecspi3: ecspi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -237,7 +237,7 @@ status = "disabled"; }; - ecspi4: ecspi@02014000 { + ecspi4: ecspi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -249,7 +249,7 @@ status = "disabled"; }; - uart7: serial@02018000 { + uart7: serial@2018000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x02018000 0x4000>; @@ -260,7 +260,7 @@ status = "disabled"; }; - uart1: serial@02020000 { + uart1: serial@2020000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x02020000 0x4000>; @@ -271,7 +271,7 @@ status = "disabled"; }; - uart8: serial@02024000 { + uart8: serial@2024000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x02024000 0x4000>; @@ -282,7 +282,7 @@ status = "disabled"; }; - sai1: sai@02028000 { + sai1: sai@2028000 { #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x02028000 0x4000>; @@ -297,7 +297,7 @@ status = "disabled"; }; - sai2: sai@0202c000 { + sai2: sai@202c000 { #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x0202c000 0x4000>; @@ -312,7 +312,7 @@ status = "disabled"; }; - sai3: sai@02030000 { + sai3: sai@2030000 { #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x02030000 0x4000>; @@ -328,7 +328,7 @@ }; }; - tsc: tsc@02040000 { + tsc: tsc@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = , @@ -339,7 +339,7 @@ status = "disabled"; }; - pwm1: pwm@02080000 { + pwm1: pwm@2080000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = ; @@ -350,7 +350,7 @@ status = "disabled"; }; - pwm2: pwm@02084000 { + pwm2: pwm@2084000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = ; @@ -361,7 +361,7 @@ status = "disabled"; }; - pwm3: pwm@02088000 { + pwm3: pwm@2088000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = ; @@ -372,7 +372,7 @@ status = "disabled"; }; - pwm4: pwm@0208c000 { + pwm4: pwm@208c000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = ; @@ -383,7 +383,7 @@ status = "disabled"; }; - can1: flexcan@02090000 { + can1: flexcan@2090000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = ; @@ -393,7 +393,7 @@ status = "disabled"; }; - can2: flexcan@02094000 { + can2: flexcan@2094000 { compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = ; @@ -403,7 +403,7 @@ status = "disabled"; }; - gpt1: gpt@02098000 { + gpt1: gpt@2098000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x02098000 0x4000>; interrupts = ; @@ -412,7 +412,7 @@ clock-names = "ipg", "per"; }; - gpio1: gpio@0209c000 { + gpio1: gpio@209c000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x0209c000 0x4000>; interrupts = , @@ -425,7 +425,7 @@ <&iomuxc 16 33 16>; }; - gpio2: gpio@020a0000 { + gpio2: gpio@20a0000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020a0000 0x4000>; interrupts = , @@ -437,7 +437,7 @@ gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>; }; - gpio3: gpio@020a4000 { + gpio3: gpio@20a4000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020a4000 0x4000>; interrupts = , @@ -449,7 +449,7 @@ gpio-ranges = <&iomuxc 0 65 29>; }; - gpio4: gpio@020a8000 { + gpio4: gpio@20a8000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020a8000 0x4000>; interrupts = , @@ -461,7 +461,7 @@ gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>; }; - gpio5: gpio@020ac000 { + gpio5: gpio@20ac000 { compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; reg = <0x020ac000 0x4000>; interrupts = , @@ -473,7 +473,7 @@ gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>; }; - fec2: ethernet@020b4000 { + fec2: ethernet@20b4000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x020b4000 0x4000>; interrupts = , @@ -490,7 +490,7 @@ status = "disabled"; }; - kpp: kpp@020b8000 { + kpp: kpp@20b8000 { compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = ; @@ -498,14 +498,14 @@ status = "disabled"; }; - wdog1: wdog@020bc000 { + wdog1: wdog@20bc000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = ; clocks = <&clks IMX6UL_CLK_WDOG1>; }; - wdog2: wdog@020c0000 { + wdog2: wdog@20c0000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = ; @@ -513,7 +513,7 @@ status = "disabled"; }; - clks: ccm@020c4000 { + clks: ccm@20c4000 { compatible = "fsl,imx6ul-ccm"; reg = <0x020c4000 0x4000>; interrupts = , @@ -523,7 +523,7 @@ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; }; - anatop: anatop@020c8000 { + anatop: anatop@20c8000 { compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; @@ -580,7 +580,7 @@ }; }; - usbphy1: usbphy@020c9000 { + usbphy1: usbphy@20c9000 { compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = ; @@ -589,7 +589,7 @@ fsl,anatop = <&anatop>; }; - usbphy2: usbphy@020ca000 { + usbphy2: usbphy@20ca000 { compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = ; @@ -598,7 +598,16 @@ fsl,anatop = <&anatop>; }; - snvs: snvs@020cc000 { + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; + + snvs: snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x020cc000 0x4000>; @@ -628,17 +637,17 @@ }; }; - epit1: epit@020d0000 { + epit1: epit@20d0000 { reg = <0x020d0000 0x4000>; interrupts = ; }; - epit2: epit@020d4000 { + epit2: epit@20d4000 { reg = <0x020d4000 0x4000>; interrupts = ; }; - src: src@020d8000 { + src: src@20d8000 { compatible = "fsl,imx6ul-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = , @@ -646,7 +655,7 @@ #reset-cells = <1>; }; - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupt-controller; @@ -655,18 +664,18 @@ interrupt-parent = <&intc>; }; - iomuxc: iomuxc@020e0000 { + iomuxc: iomuxc@20e0000 { compatible = "fsl,imx6ul-iomuxc"; reg = <0x020e0000 0x4000>; }; - gpr: iomuxc-gpr@020e4000 { + gpr: iomuxc-gpr@20e4000 { compatible = "fsl,imx6ul-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e4000 0x4000>; }; - gpt2: gpt@020e8000 { + gpt2: gpt@20e8000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = ; @@ -675,7 +684,7 @@ clock-names = "ipg", "per"; }; - sdma: sdma@020ec000 { + sdma: sdma@20ec000 { compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; @@ -687,7 +696,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; - pwm5: pwm@020f0000 { + pwm5: pwm@20f0000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f0000 0x4000>; interrupts = ; @@ -698,7 +707,7 @@ status = "disabled"; }; - pwm6: pwm@020f4000 { + pwm6: pwm@20f4000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f4000 0x4000>; interrupts = ; @@ -709,7 +718,7 @@ status = "disabled"; }; - pwm7: pwm@020f8000 { + pwm7: pwm@20f8000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f8000 0x4000>; interrupts = ; @@ -720,7 +729,7 @@ status = "disabled"; }; - pwm8: pwm@020fc000 { + pwm8: pwm@20fc000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020fc000 0x4000>; interrupts = ; @@ -732,14 +741,14 @@ }; }; - aips2: aips-bus@02100000 { + aips2: aips-bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - usbotg1: usb@02184000 { + usbotg1: usb@2184000 { compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = ; @@ -753,7 +762,7 @@ status = "disabled"; }; - usbotg2: usb@02184200 { + usbotg2: usb@2184200 { compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = ; @@ -766,13 +775,13 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; }; - fec1: ethernet@02188000 { + fec1: ethernet@2188000 { compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = , @@ -789,7 +798,7 @@ status = "disabled"; }; - usdhc1: usdhc@02190000 { + usdhc1: usdhc@2190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -801,7 +810,7 @@ status = "disabled"; }; - usdhc2: usdhc@02194000 { + usdhc2: usdhc@2194000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; @@ -813,7 +822,7 @@ status = "disabled"; }; - adc1: adc@02198000 { + adc1: adc@2198000 { compatible = "fsl,imx6ul-adc", "fsl,vf610-adc"; reg = <0x02198000 0x4000>; interrupts = ; @@ -825,7 +834,7 @@ status = "disabled"; }; - i2c1: i2c@021a0000 { + i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -835,7 +844,7 @@ status = "disabled"; }; - i2c2: i2c@021a4000 { + i2c2: i2c@21a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -845,7 +854,7 @@ status = "disabled"; }; - i2c3: i2c@021a8000 { + i2c3: i2c@21a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -855,18 +864,28 @@ status = "disabled"; }; - mmdc: mmdc@021b0000 { + mmdc: mmdc@21b0000 { compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - ocotp: ocotp-ctrl@021bc000 { + ocotp: ocotp-ctrl@21bc000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx6ul-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6UL_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; - lcdif: lcdif@021c8000 { + lcdif: lcdif@21c8000 { compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; reg = <0x021c8000 0x4000>; interrupts = ; @@ -877,7 +896,7 @@ status = "disabled"; }; - qspi: qspi@021e0000 { + qspi: qspi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; @@ -890,7 +909,7 @@ status = "disabled"; }; - uart2: serial@021e8000 { + uart2: serial@21e8000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021e8000 0x4000>; @@ -901,7 +920,7 @@ status = "disabled"; }; - uart3: serial@021ec000 { + uart3: serial@21ec000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021ec000 0x4000>; @@ -912,7 +931,7 @@ status = "disabled"; }; - uart4: serial@021f0000 { + uart4: serial@21f0000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021f0000 0x4000>; @@ -923,7 +942,7 @@ status = "disabled"; }; - uart5: serial@021f4000 { + uart5: serial@21f4000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021f4000 0x4000>; @@ -934,7 +953,7 @@ status = "disabled"; }; - i2c4: i2c@021f8000 { + i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; @@ -944,7 +963,7 @@ status = "disabled"; }; - uart6: serial@021fc000 { + uart6: serial@21fc000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; reg = <0x021fc000 0x4000>; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 0a3915868aa328fc4bafa4650ecf9085ce85b8df..bb5bf94f1a3295f38ca5497a1e11e1a8646e1045 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -121,7 +121,7 @@ pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; reg = <0x0a>; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index e7998308861fa395477bfbced53706e810a5e40b..2b05898bb3f68805d0ac801f42ddceb3644b3c8e 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -181,7 +181,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts index e78c2c9cc28a919f51cbc7fc815dba5aafca69e1..508328b2a6bf4375f880a43b00575f7fd84b14fa 100644 --- a/arch/arm/boot/dts/imx7d-pico.dts +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -52,6 +52,17 @@ reg = <0x80000000 0x80000000>; }; + reg_ap6212: regulator-ap6212 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ap6212>; + regulator-name = "AP6212"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; @@ -137,7 +148,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; @@ -152,7 +163,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -271,6 +282,17 @@ status = "okay"; }; +&usdhc2 { /* Wifi SDIO */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_ap6212>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -326,6 +348,12 @@ >; }; + pinctrl_reg_ap6212: regap6212grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59 + >; + }; + pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f @@ -348,6 +376,17 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 44637cabcc566d402847992607984f9736db5a27..a7a5dc7b270083ffc6172a5d4cd499f74a7c67d6 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -241,7 +241,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 07b63f8b7314595980f928e06c68ee8e602a6111..9bdf121f7e4358840c969b859d683ed25f321529 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -122,7 +122,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -226,7 +226,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 380f9ae60c78856f083dbd1370f80cc92dbbda1a..4d58638d104b4b7060398500b51be5f79c04a51d 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -11,7 +11,7 @@ reg = <0x10000000 0x200>; /* Use core module LED to indicate CPU load */ - led@0c.0 { + led@c.0 { compatible = "register-bit-led"; offset = <0x0c>; mask = <0x01>; @@ -100,7 +100,7 @@ compatible = "syscon", "simple-mfd"; reg = <0x1a000000 0x10>; - led@04.0 { + led@4.0 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x01>; @@ -108,21 +108,21 @@ linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@04.1 { + led@4.1 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x02>; label = "integrator:yellow"; default-state = "off"; }; - led@04.2 { + led@4.2 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x04>; label = "integrator:red"; default-state = "off"; }; - led@04.3 { + led@4.3 { compatible = "register-bit-led"; offset = <0x04>; mask = <0x08>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index a5d88a213dcda47c0756a53dc6c516dffeb4455b..94d2ff9836d00367a086f01a69bb16acd95008dd 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -154,21 +154,26 @@ }; pci: pciv3@62000000 { - compatible = "v3,v360epc-pci"; + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0x62000000 0x10000>; + /* Bridge registers and config access space */ + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; interrupt-parent = <&pic>; interrupts = <17>; /* Bus error IRQ */ - ranges = <0x00000000 0 0x61000000 /* config space */ - 0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */ - 0x01000000 0 0x0 /* I/O space */ - 0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */ - 0x02000000 0 0x00000000 /* non-prefectable memory */ - 0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */ - 0x42000000 0 0x10000000 /* prefetchable memory */ - 0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */ + 0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ interrupt-map-mask = <0xf800 0 0 0x7>; interrupt-map = < /* IDSEL 9 */ diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..efd8af9242d12fcfc909d33bd99e8729acf2cfee --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -0,0 +1,152 @@ +/* + * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + micrel,led-mode = <1>; + }; +}; + +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; + + scif0_pins: scif0 { + groups = "scif0_data_d"; + function = "scif0"; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..31fab5f183a9c008ee27b70f9cc6ee30057f1d3f --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -0,0 +1,43 @@ +/* + * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial1 = &scif1; + serial4 = &hscif1; + }; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&pfc { + hscif1_pins: hscif1 { + groups = "hscif1_data_c", "hscif1_ctrl_c"; + function = "hscif1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_d"; + function = "scif1"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 819ab83459163963a80c9471c1b61c7eca422311..6b796b52ff4f8497eca86db917ce52102e4c8312 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -88,7 +88,7 @@ }; }; - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; @@ -100,7 +100,7 @@ }; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { pscrst: reset-controller { compatible = "ti,k2e-pscrst", "ti,syscon-reset"; #reset-cells = <1>; @@ -111,7 +111,7 @@ }; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index f462f1043531682f2c00dcc9f287dad5df8dd03e..656af194a518263c08474bb45c162badb907d5c0 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -45,6 +45,22 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + ecap0_pins: ecap0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */ + K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */ + K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */ + K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */ + >; + }; + }; &k2g_pinctrl { @@ -81,6 +97,14 @@ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ >; }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + >; + }; + }; &uart0 { @@ -112,3 +136,72 @@ memory-region = <&dsp_common_memory>; status = "okay"; }; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c1024"; + reg = <0x50>; + }; +}; + +&keystone_usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + status = "okay"; +}; + +&keystone_usb1 { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi_nor: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <5000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x100000 0xf00000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 826b286665e62491bc85dccf65f0528cc425512c..8f313ff406b9f9a416e0b1e9182f0ecfcd29d373 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -28,6 +28,9 @@ aliases { serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; rproc0 = &dsp0; }; @@ -42,7 +45,7 @@ }; }; - gic: interrupt-controller@02561000 { + gic: interrupt-controller@2561000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -80,7 +83,7 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x100000>; ranges = <0x0 0x0c000000 0x100000>; @@ -92,19 +95,19 @@ }; }; - k2g_pinctrl: pinmux@02621000 { + k2g_pinctrl: pinmux@2621000 { compatible = "pinctrl-single"; reg = <0x02621000 0x410>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x001b0007>; }; - devctrl: device-state-control@02620000 { + devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -115,7 +118,7 @@ status = "disabled"; }; - dcan0: can@0260B200 { + dcan0: can@260b200 { compatible = "ti,am4372-d_can", "ti,am3352-d_can"; reg = <0x0260B200 0x200>; interrupts = ; @@ -124,7 +127,7 @@ clocks = <&k2g_clks 0x0008 1>; }; - dcan1: can@0260B400 { + dcan1: can@260b400 { compatible = "ti,am4372-d_can", "ti,am3352-d_can"; reg = <0x0260B400 0x200>; interrupts = ; @@ -133,7 +136,40 @@ clocks = <&k2g_clks 0x0009 1>; }; - kirq0: keystone_irq@026202a0 { + i2c0: i2c@2530000 { + compatible = "ti,keystone-i2c"; + reg = <0x02530000 0x400>; + clocks = <&k2g_clks 0x003a 0>; + power-domains = <&k2g_pds 0x003a>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@2530400 { + compatible = "ti,keystone-i2c"; + reg = <0x02530400 0x400>; + clocks = <&k2g_clks 0x003b 0>; + power-domains = <&k2g_pds 0x003b>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@2530800 { + compatible = "ti,keystone-i2c"; + reg = <0x02530800 0x400>; + clocks = <&k2g_clks 0x003c 0>; + power-domains = <&k2g_pds 0x003c>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + kirq0: keystone_irq@26202a0 { compatible = "ti,keystone-irq"; interrupts = ; interrupt-controller; @@ -141,7 +177,7 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; @@ -164,7 +200,7 @@ status = "disabled"; }; - msgmgr: msgmgr@02a00000 { + msgmgr: msgmgr@2a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; reg-names = "queue_proxy_region", @@ -176,7 +212,7 @@ ; }; - pmmc: pmmc@02921c00 { + pmmc: pmmc@2921c00 { compatible = "ti,k2g-sci"; /* * In case of rare platforms that does not use k2g as @@ -246,7 +282,7 @@ clock-names = "gpio"; }; - edma0: edma@02700000 { + edma0: edma@2700000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02700000 0x8000>; reg-names = "edma3_cc"; @@ -265,19 +301,19 @@ power-domains = <&k2g_pds 0x3f>; }; - edma0_tptc0: tptc@02760000 { + edma0_tptc0: tptc@2760000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x02760000 0x400>; power-domains = <&k2g_pds 0x3f>; }; - edma0_tptc1: tptc@02768000 { + edma0_tptc1: tptc@2768000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x02768000 0x400>; power-domains = <&k2g_pds 0x3f>; }; - edma1: edma@02728000 { + edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; @@ -300,13 +336,13 @@ power-domains = <&k2g_pds 0x4f>; }; - edma1_tptc0: tptc@027b0000 { + edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; - edma1_tptc1: tptc@027b8000 { + edma1_tptc1: tptc@27b8000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; @@ -343,5 +379,177 @@ clock-names = "fck", "mmchsdb_fck"; status = "disabled"; }; + + mcasp0: mcasp@2340000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02340000 0x2000>, + <0x21804000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma0 24 1>, <&edma0 25 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x4>; + clocks = <&k2g_clks 0x4 0>; + clock-names = "fck"; + status = "disabled"; + }; + + mcasp1: mcasp@2342000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02342000 0x2000>, + <0x21804400 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma1 48 1>, <&edma1 49 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x5>; + clocks = <&k2g_clks 0x5 0>; + clock-names = "fck"; + status = "disabled"; + }; + + mcasp2: mcasp@2344000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02344000 0x2000>, + <0x21804800 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma1 50 1>, <&edma1 51 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x6>; + clocks = <&k2g_clks 0x6 0>; + clock-names = "fck"; + status = "disabled"; + }; + + usb0_phy: usb-phy@0 { + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; + + keystone_usb0: keystone-dwc3@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + interrupts = ; + ranges; + dma-coherent; + dma-ranges; + status = "disabled"; + power-domains = <&k2g_pds 0x0016>; + + usb0: usb@2690000 { + compatible = "snps,dwc3"; + reg = <0x2690000 0x10000>; + interrupts = ; + maximum-speed = "high-speed"; + dr_mode = "otg"; + usb-phy = <&usb0_phy>; + status = "disabled"; + }; + }; + + usb1_phy: usb-phy@1 { + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; + + keystone_usb1: keystone-dwc3@2580000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2580000 0x10000>; + interrupts = ; + ranges; + dma-coherent; + dma-ranges; + status = "disabled"; + power-domains = <&k2g_pds 0x0017>; + + usb1: usb@2590000 { + compatible = "snps,dwc3"; + reg = <0x2590000 0x10000>; + interrupts = ; + maximum-speed = "high-speed"; + dr_mode = "otg"; + usb-phy = <&usb1_phy>; + status = "disabled"; + }; + }; + + ecap0: pwm@21d1800 { + compatible = "ti,k2g-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x021d1800 0x60>; + power-domains = <&k2g_pds 0x38>; + clocks = <&k2g_clks 0x38 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap1: pwm@21d1c00 { + compatible = "ti,k2g-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x021d1c00 0x60>; + power-domains = <&k2g_pds 0x39>; + clocks = <&k2g_clks 0x39 0x0>; + clock-names = "fck"; + status = "disabled"; + }; + + spi0: spi@21805400 { + compatible = "ti,keystone-spi"; + reg = <0x21805400 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0010>; + clocks = <&k2g_clks 0x0010 0>; + }; + + spi1: spi@21805800 { + compatible = "ti,keystone-spi"; + reg = <0x21805800 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0011>; + clocks = <&k2g_clks 0x0011 0>; + }; + + spi2: spi@21805c00 { + compatible = "ti,keystone-spi"; + reg = <0x21805C00 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0012>; + clocks = <&k2g_clks 0x0012 0>; + }; + + spi3: spi@21806000 { + compatible = "ti,keystone-spi"; + reg = <0x21806000 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0013>; + clocks = <&k2g_clks 0x0013 0>; + }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 31dc00e4e5fd8ce1124c48e575b9772804a0798f..7c486d9dc90ed38d8c268f1dc9048ddd58ad3766 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -59,7 +59,7 @@ soc { /include/ "keystone-k2hk-clocks.dtsi" - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x600000>; ranges = <0x0 0x0c000000 0x600000>; @@ -71,7 +71,7 @@ }; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { pscrst: reset-controller { compatible = "ti,k2hk-pscrst", "ti,syscon-reset"; #reset-cells = <1>; @@ -89,7 +89,7 @@ }; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; @@ -273,7 +273,7 @@ status = "disabled"; }; - mdio: mdio@02090300 { + mdio: mdio@2090300 { compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 4431310bc922bf3c6e4de97f4bcd0dc2ee262056..4370e6513aa4ff23c5e0b01c03250b9de2401b76 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -43,7 +43,7 @@ soc { /include/ "keystone-k2l-clocks.dtsi" - uart2: serial@02348400 { + uart2: serial@2348400 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -53,7 +53,7 @@ interrupts = ; }; - uart3: serial@02348800 { + uart3: serial@2348800 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -63,7 +63,7 @@ interrupts = ; }; - k2l_pmx: pinmux@02620690 { + k2l_pmx: pinmux@2620690 { compatible = "pinctrl-single"; reg = <0x02620690 0xc>; #address-cells = <1>; @@ -213,7 +213,7 @@ }; }; - msm_ram: msmram@0c000000 { + msm_ram: msmram@c000000 { compatible = "mmio-sram"; reg = <0x0c000000 0x200000>; ranges = <0x0 0x0c000000 0x200000>; @@ -225,7 +225,7 @@ }; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { pscrst: reset-controller { compatible = "ti,k2l-pscrst", "ti,syscon-reset"; #reset-cells = <1>; @@ -247,7 +247,7 @@ clocks = <&clkosr>; }; - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 8dd74f48a6d3720119153745bdea67f629d19c29..06e10544f9b11b4fb41b35beb2d1542435cf83f2 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -78,17 +78,17 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; - pllctrl: pll-controller@02310000 { + pllctrl: pll-controller@2310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { compatible = "syscon", "simple-mfd"; reg = <0x02350000 0x1000>; }; - devctrl: device-state-control@02620000 { + devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; @@ -102,7 +102,7 @@ /include/ "keystone-clocks.dtsi" - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -112,7 +112,7 @@ interrupts = ; }; - uart1: serial@02531000 { + uart1: serial@2531000 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -214,7 +214,7 @@ }; }; - wdt: wdt@022f0080 { + wdt: wdt@22f0080 { compatible = "ti,keystone-wdt","ti,davinci-wdt"; reg = <0x022f0080 0x80>; clocks = <&clkwdtimer0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 65e9524e852ab0570e72330fc8a5eabfb4fe173f..210d21a65bd13b9a7f09bf2cf73a644b0044db66 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -208,32 +208,32 @@ spi-max-frequency = <20000000>; mode = <0>; - partition@00000000 { + partition@0 { reg = <0x00000000 0x00080000>; label = "RedBoot"; }; - partition@00080000 { + partition@80000 { reg = <0x00080000 0x00200000>; label = "zImage"; }; - partition@00280000 { + partition@280000 { reg = <0x00280000 0x00140000>; label = "rd.gz"; }; - partition@003c0000 { + partition@3c0000 { reg = <0x003c0000 0x00010000>; label = "vendor"; }; - partition@003d0000 { + partition@3d0000 { reg = <0x003d0000 0x00020000>; label = "RedBoot config"; }; - partition@003f0000 { + partition@3f0000 { reg = <0x003f0000 0x00010000>; label = "FIS directory"; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 4faea1d9facf1058d6bdcc073a9eafabda893163..a88eb22070a1b714ca74a5384e3302b2806166b7 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -45,29 +45,29 @@ spi-max-frequency = <20000000>; mode = <0>; - partition@0000000 { + partition@0 { reg = <0x00000000 0x00080000>; label = "U-Boot"; }; - partition@00200000 { + partition@200000 { reg = <0x00200000 0x00200000>; label = "Kernel"; }; - partition@00400000 { + partition@400000 { reg = <0x00400000 0x00900000>; label = "RootFS1"; }; - partition@00d00000 { + partition@d00000 { reg = <0x00d00000 0x00300000>; label = "RootFS2"; }; - partition@00040000 { + partition@40000 { reg = <0x00080000 0x00040000>; label = "U-Boot Config"; }; - partition@000c0000 { + partition@c0000 { reg = <0x000c0000 0x00140000>; label = "NAS Config"; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index a70fc7f01fc391e619710c1e17871aadd9e77454..eb2bf74096559b006d3f75af15ca6183a78d8eb5 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -41,7 +41,7 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - nand: nand@012f { + nand: nand@12f { #address-cells = <1>; #size-cells = <1>; cle = <0>; @@ -57,7 +57,7 @@ status = "disabled"; }; - crypto_sram: sa-sram@0301 { + crypto_sram: sa-sram@301 { compatible = "mmio-sram"; reg = ; clocks = <&gate_clk 17>; diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts index 52b3ed10283a7a5dabca56341d623a60017420dc..c43adb7b4d7ca5e342f628d2890ef99c6901a5f8 100644 --- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -231,24 +231,24 @@ #address-cells = <1>; #size-cells = <1>; - mtd0@00000000 { + mtd0@0 { label = "ea3250-boot"; reg = <0x00000000 0x00080000>; read-only; }; - mtd1@00080000 { + mtd1@80000 { label = "ea3250-uboot"; reg = <0x00080000 0x000c0000>; read-only; }; - mtd2@00140000 { + mtd2@140000 { label = "ea3250-kernel"; reg = <0x00140000 0x00400000>; }; - mtd3@00540000 { + mtd3@540000 { label = "ea3250-rootfs"; reg = <0x00540000 0x07ac0000>; }; diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index fd95e2b10357755478f544075bb2ac30d3ace486..c72eb9845603a25d0968ae07730e2b6d2faa11b7 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -154,29 +154,29 @@ #address-cells = <1>; #size-cells = <1>; - mtd0@00000000 { + mtd0@0 { label = "phy3250-boot"; reg = <0x00000000 0x00064000>; read-only; }; - mtd1@00064000 { + mtd1@64000 { label = "phy3250-uboot"; reg = <0x00064000 0x00190000>; read-only; }; - mtd2@001f4000 { + mtd2@1f4000 { label = "phy3250-ubt-prms"; reg = <0x001f4000 0x00010000>; }; - mtd3@00204000 { + mtd3@204000 { label = "phy3250-kernel"; reg = <0x00204000 0x00400000>; }; - mtd4@00604000 { + mtd4@604000 { label = "phy3250-rootfs"; reg = <0x00604000 0x039fc000>; }; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index d81fe433e3c82eafa0ea1703a5b6fe7905e6f7ac..abff7ef7c9cd6a571a5966ff75f473215c737233 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -55,7 +55,7 @@ <0x20000000 0x20000000 0x30000000>, <0xe0000000 0xe0000000 0x04000000>; - iram: sram@08000000 { + iram: sram@8000000 { compatible = "mmio-sram"; reg = <0x08000000 0x20000>; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index cd6ad072e72c17ebe287b72d3f26657a402a97ba..4926133077b3541165ccf989af0834a8362411b3 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -80,6 +80,20 @@ #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; + assist: assist@7c00 { + compatible = "amlogic,meson-mx-assist", "syscon"; + reg = <0x7c00 0x200>; + }; + + gpio_intc: interrupt-controller@9880 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0xc1109880 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + hwrng: rng@8100 { compatible = "amlogic,meson-rng"; reg = <0x8100 0x8>; @@ -160,6 +174,15 @@ status = "disabled"; }; + sdio: mmc@8c20 { + compatible = "amlogic,meson-mx-sdio"; + reg = <0x8c20 0x20>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spifc: spi@8c80 { compatible = "amlogic,meson6-spifc"; reg = <0x8c80 0x80>; @@ -217,7 +240,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xc9040000 0x40000>; - interrupts = ; + interrupts = ; phys = <&usb0_phy>; phy-names = "usb2-phy"; dr_mode = "host"; @@ -229,7 +252,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xc90c0000 0x40000>; - interrupts = ; + interrupts = ; phys = <&usb1_phy>; phy-names = "usb2-phy"; dr_mode = "host"; @@ -252,5 +275,25 @@ #size-cells = <1>; ranges = <0 0xd9000000 0x20000>; }; + + bootrom: bootrom@d9040000 { + compatible = "amlogic,meson-mx-bootrom", "syscon"; + reg = <0xd9040000 0x10000>; + }; + + secbus: secbus@da000000 { + compatible = "simple-bus"; + reg = <0xda000000 0x6000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xda000000 0x6000>; + + efuse: nvmem@0 { + compatible = "amlogic,meson6-efuse"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index ef281d2900527703af28b49f425df50415d1bd2d..9b463211339f5f5bc9156e88da3881607ba22ecc 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -84,6 +84,9 @@ }; }; /* end of / */ +&efuse { + status = "disabled"; +}; &uart_AO { clocks = <&xtal>, <&clk81>, <&clk81>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index b98d44fde6b60bc9301a3b23cb65f2ccd0d8e64c..2d7a0752a460886de27f1a280169538f95422f9f 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -45,6 +45,7 @@ #include #include +#include #include "meson.dtsi" / { @@ -60,6 +61,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x200>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; cpu@201 { @@ -67,6 +70,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x201>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; cpu@202 { @@ -74,6 +79,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x202>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; cpu@203 { @@ -81,6 +88,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x203>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; }; }; @@ -118,6 +127,11 @@ }; /* end of / */ &aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8-pmu", "syscon"; + reg = <0xe0 0x8>; + }; + pinctrl_aobus: pinctrl@84 { compatible = "amlogic,meson8-aobus-pinctrl"; reg = <0x84 0xc>; @@ -132,7 +146,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 120 16>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; }; uart_ao_a_pins: uart_ao_a { @@ -173,6 +187,11 @@ reg = <0x8000 0x4>, <0x4000 0x460>; }; + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; + pwm_ef: pwm@86c0 { compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; reg = <0x86c0 0x10>; @@ -249,6 +268,19 @@ }; }; +&ahb_sram { + smp-sram@1ff80 { + compatible = "amlogic,meson8-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + +&efuse { + compatible = "amlogic,meson8-efuse"; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; +}; + ðmac { clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; @@ -294,6 +326,12 @@ clock-names = "clkin", "core", "sana"; }; +&sdio { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; +}; + &spifc { clocks = <&clkc CLKID_CLK81>; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index e50f1a1fdbc79a57116b499a8a227369083b387e..9ff6ca4e20d069f56427fef917f20d71bdf83649 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -76,3 +76,26 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&gpio_ao { + /* + * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal + * to be turned high in order to be detected by the USB Controller. + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = ; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index bc278da7df0d93b260eb36d0080b64de2711c592..d75e0ceda8bbec15119068e40ce15bd7e0212972 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -47,6 +47,7 @@ #include #include #include +#include #include "meson.dtsi" / { @@ -59,6 +60,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x200>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; cpu@201 { @@ -66,6 +69,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x201>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; cpu@202 { @@ -73,6 +78,8 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x202>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; cpu@203 { @@ -80,6 +87,20 @@ compatible = "arm,cortex-a5"; next-level-cache = <&L2>; reg = <0x203>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; }; }; @@ -90,6 +111,11 @@ }; /* end of / */ &aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xe0 0x18>; + }; + pinctrl_aobus: pinctrl@84 { compatible = "amlogic,meson8b-aobus-pinctrl"; reg = <0x84 0xc>; @@ -104,7 +130,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 130 16>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; }; uart_ao_a_pins: uart_ao_a { @@ -130,6 +156,11 @@ #reset-cells = <1>; }; + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8b-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; + pwm_ef: pwm@86c0 { compatible = "amlogic,meson8b-pwm"; reg = <0x86c0 0x10>; @@ -157,11 +188,31 @@ }; }; +&ahb_sram { + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + + +&efuse { + compatible = "amlogic,meson8b-efuse"; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; +}; + ðmac { clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; }; +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson8b-gpio-intc"; + status = "okay"; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -190,6 +241,12 @@ clock-names = "clkin", "core", "sana"; }; +&sdio { + compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; +}; + &uart_AO { clocks = <&clkc CLKID_CLK81>; }; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 116ce78bea4fd0716ec53e7fa71aec275ec69b62..36cfa215620d2c26cc50f313826d53ffdfd24ec8 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -46,7 +46,7 @@ }; }; - usb0: ohci@00300000 { + usb0: ohci@300000 { num-ports = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index f48497354221d3fd786258940e4d25e2e109f4de..63af4b13a36f040c41d6d5d34f91d6a91d9c1b38 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -56,12 +56,29 @@ bt_sco_codec:bt_sco_codec { compatible = "linux,bt-sco"; }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&bls 0 100000>; + brightness-levels = < + 0 16 32 48 64 80 96 112 + 128 144 160 176 192 208 224 240 + 255 + >; + default-brightness-level = <9>; + }; }; &auxadc { status = "okay"; }; +&bls { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_bls_gpio>; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -111,6 +128,12 @@ }; }; + pwm_bls_gpio: pwm_bls_gpio { + pins_cmd_dat { + pinmux = ; + }; + }; + spi_pins_a: spi0@0 { pins_spi { pinmux = , diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index afe12e5b51f95374e2f8f5f91b91f2bbc189e193..965ddfbc9953685e559bfc169ef654ce60bc7347 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -430,7 +430,9 @@ compatible = "mediatek,mt2701-audio"; reg = <0 0x11220000 0 0x2000>, <0 0x112a0000 0 0x20000>; - interrupts = ; + interrupts = , + ; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, @@ -530,6 +532,15 @@ #clock-cells = <1>; }; + bls: pwm@1400a000 { + compatible = "mediatek,mt2701-disp-pwm"; + reg = <0 0x1400a000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>; + clock-names = "main", "mm"; + status = "disabled"; + }; + larb0: larb@14010000 { compatible = "mediatek,mt2701-smi-larb"; reg = <0 0x14010000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 0d6f60af76402f5de54b7ecea8add726d85b31b0..41df742d78914b96eae2b2f7fa2e9b2154b1c3fc 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -139,7 +139,7 @@ status = "disabled"; }; - wdt: watchdog@010000000 { + wdt: watchdog@10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x44>; }; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index ec8a07415cb38816db5990aa240744b9d9b27e64..0640fb75bf59bc20e8a679d43d487395ade67d3a 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -227,8 +227,7 @@ }; pio: pinctrl@10005000 { - compatible = "mediatek,mt7623-pinctrl", - "mediatek,mt2701-pinctrl"; + compatible = "mediatek,mt7623-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; pins-are-numbered; @@ -544,7 +543,9 @@ "mediatek,mt2701-audio"; reg = <0 0x11220000 0 0x2000>, <0 0x112a0000 0 0x20000>; - interrupts = ; + interrupts = , + ; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, @@ -678,7 +679,7 @@ interrupts = ; clocks = <&hifsys CLK_HIFSYS_USB0PHY>, <&topckgen CLK_TOP_ETHIF_SEL>; - clock-names = "sys_ck", "free_ck"; + clock-names = "sys_ck", "ref_ck"; power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; status = "disabled"; @@ -688,8 +689,6 @@ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; reg = <0 0x1a1c4000 0 0x0700>; - clocks = <&clk26m>; - clock-names = "u3phya_ref"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -697,12 +696,16 @@ u2port0: usb-phy@1a1c4800 { reg = <0 0x1a1c4800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; u3port0: usb-phy@1a1c4900 { reg = <0 0x1a1c4900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; @@ -717,7 +720,7 @@ interrupts = ; clocks = <&hifsys CLK_HIFSYS_USB1PHY>, <&topckgen CLK_TOP_ETHIF_SEL>; - clock-names = "sys_ck", "free_ck"; + clock-names = "sys_ck", "ref_ck"; power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; status = "disabled"; @@ -727,8 +730,6 @@ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; reg = <0 0x1a244000 0 0x0700>; - clocks = <&clk26m>; - clock-names = "u3phya_ref"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -736,12 +737,16 @@ u2port1: usb-phy@1a244800 { reg = <0 0x1a244800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; u3port1: usb-phy@1a244900 { reg = <0 0x1a244900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; @@ -782,16 +787,15 @@ }; crypto: crypto@1b240000 { - compatible = "mediatek,mt7623-crypto"; + compatible = "mediatek,eip97-crypto"; reg = <0 0x1b240000 0 0x20000>; interrupts = , , , , ; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_CRYPTO>; - clock-names = "ethif","cryp"; + clocks = <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "cryp"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index ee5a0bb22354df10d9d3fc6d4179f7f8460fd933..ec2283b1a638e028d28e57d53e8a7dd9fc2c2778 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -20,7 +20,7 @@ }; }; - bootrom: bootrom@00000000 { + bootrom: bootrom@0 { reg = <0x00000000 0x80000>; }; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index 1de80c7886abaa7f9bb25432519c65a112a501ee..1df3ace3af9275254a05b4097b83d0a25a975061 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -7,6 +7,10 @@ reg = <0x80000000 0x8000000>; /* 128 MB */ }; + chosen { + stdout-path = &uart3; + }; + ocp { i2c0 { compatible = "i2c-cbus-gpio"; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index c963b31ec3b3cd9368911df73a21764663b42a5d..5a4ba0aea44711de976971991e91be063fc0ac46 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -9,146 +9,11 @@ #include "omap36xx.dtsi" #include "omap3-evm-common.dtsi" - +#include "omap3-evm-processor-common.dtsi" / { model = "TI OMAP37XX EVM (TMDSEVM3730)"; compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - wl12xx_vmmc: wl12xx_vmmc { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_gpio>; - }; -}; - -&dss { - pinctrl-names = "default"; - pinctrl-0 = < - &dss_dpi_pins1 - &dss_dpi_pins2 - >; -}; - -&hsusb2_phy { - pinctrl-names = "default"; - pinctrl-0 = <&ehci_phy_pins>; -}; - -&omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; - - dss_dpi_pins1: pinmux_dss_dpi_pins2 { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ - >; - }; - - /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ - mmc2_pins: pinmux_mmc2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ - >; - }; - - /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ - on_board_gpio_61: pinmux_ehci_port_select_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) - >; - }; - - /* Used by OHCI and EHCI. OHCI won't work without external phy */ - hsusb2_pins: pinmux_hsusb2_pins { - pinctrl-single,pins = < - - /* mcspi1_cs3.hsusb2_data2 */ - OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_clk.hsusb2_data7 */ - OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_simo.hsusb2_data4 */ - OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_somi.hsusb2_data5 */ - OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_cs0.hsusb2_data6 */ - OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) - - /* mcspi2_cs1.hsusb2_data3 */ - OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) - >; - }; - - wl12xx_gpio: pinmux_wl12xx_gpio { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ - OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ - >; - }; - - smsc911x_pins: pinmux_smsc911x_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ - >; - }; }; &omap3_pmx_core2 { @@ -191,74 +56,7 @@ }; }; -&omap3_pmx_wkup { - dss_dpi_pins2: pinmux_dss_dpi_pins1 { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ - OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ - OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ - OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ - OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ - OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ - >; - }; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; -}; - -&mmc3 { - status = "disabled"; -}; - -&uart1 { - interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; -}; - -&uart2 { - interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; -}; - -&uart3 { - interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - -/* - * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface - * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. - */ -&gpio2 { - en_usb2_port { - gpio-hog; - gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ - output-low; - line-name = "enable usb2 port"; - }; -}; - -/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ -&twl_gpio { - en_on_board_gpio_61 { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "en_hsusb2_clk"; - }; -}; - &gpmc { - ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ - <5 0 0x2c000000 0x01000000>; - nand@0,0 { compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ @@ -309,9 +107,4 @@ reg = <0x780000 0x1f880000>; }; }; - - ethernet@gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&smsc911x_pins>; - }; }; diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ce7f42f9448cd6521d7f2d43595a1ab08161bf4f --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi @@ -0,0 +1,216 @@ +/* + * Common support for omap3 EVM 35xx/37xx processor modules + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + }; +}; + +&dss { + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&lcd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins1 + &dss_dpi_pins2 + >; +}; + +&hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&ehci_phy_pins>; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; + + dss_dpi_pins1: pinmux_dss_dpi_pins2 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ + on_board_gpio_61: pinmux_ehci_port_select_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + + /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs1.hsusb2_data3 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ + >; + }; + + smsc911x_pins: pinmux_smsc911x_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; +}; + +&omap3_pmx_wkup { + dss_dpi_pins2: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +/* + * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface + * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. + */ +&gpio2 { + en_usb2_port { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ + output-low; + line-name = "enable usb2 port"; + }; +}; + +/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ +&twl_gpio { + en_on_board_gpio_61 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "en_hsusb2_clk"; + }; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ + <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for LAN9220 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&smsc911x_pins>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 99b2bfcd1059fdfbf1b4b3a95d7b598f224b199d..21a3b88aef0cc42efa2f857738f740b4fbd821d9 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -9,13 +9,81 @@ #include "omap34xx.dtsi" #include "omap3-evm-common.dtsi" +#include "omap3-evm-processor-common.dtsi" / { model = "TI OMAP35XX EVM (TMDSEVM3530)"; - compatible = "ti,omap3-evm", "ti,omap3"; + compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3"; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +&gpmc { + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16abdhc"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ + #address-cells = <1>; + #size-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index fa611a5e48506c688c9406424e6454fb8d724449..343a36d8031d8a2207d9b411ae71000b50232fa0 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -257,7 +257,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; gpiom1: gpio@20 { - compatible = "mcp,mcp23017"; + compatible = "microchip,mcp23017"; gpio-controller; #gpio-cells = <2>; reg = <0x20>; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index b9e58c536afd5b63bf021869867c82914504d62a..39e35f8b8206aeca9f23286b305f8cc7c92563f9 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -26,6 +26,7 @@ clocks = <&isp 0>; clock-frequency = <9600000>; nokia,nvm-size = <(16 * 64)>; + flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { link-frequencies = /bits/ 64 <199200000 210000000 499200000>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4acd32a1c4ef7c8801bbd516f2f317d50db21218..669c51c00c000ecb40afb036428be5e273381457 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -791,7 +791,7 @@ }; /* D/A converter for auto-focus */ - ad5820: dac@0c { + ad5820: dac@c { compatible = "adi,ad5820"; reg = <0x0c>; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 1b0bd72945f21337d1e89c3e1636bbfb5cabeecd..12fbb3da5fce9855ebcba310b6564bb50f6dd52e 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -271,14 +271,14 @@ #size-cells = <0>; reg = <0x30>; compatible = "ams,as3645a"; - flash@0 { + as3645a_flash: flash@0 { reg = <0x0>; flash-timeout-us = <150000>; flash-max-microamp = <320000>; led-max-microamp = <60000>; ams,input-max-microamp = <1750000>; }; - indicator@1 { + as3645a_indicator: indicator@1 { reg = <0x1>; led-max-microamp = <10000>; }; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 646601a3ebd806fe83156f2244ab550c43e46f81..c354a1ed1e70fbe76a88f92caadc9636b59a15a9 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -60,6 +60,7 @@ clocks = <&isp 0>; clock-frequency = <9600000>; nokia,nvm-size = <(16 * 64)>; + flash-leds = <&as3645a_flash &as3645a_indicator>; port { smia_1_1: endpoint { link-frequencies = /bits/ 64 <210000000 333600000 398400000>; diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi index 25e100db7b1ac8ebf3de7449838196e9e91f7327..b8b9fcc41ef1f3d955a2ff3bc8f6ff622cd17976 100644 --- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi +++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -30,6 +30,7 @@ compatible = "sharp,ls037v7dw01"; label = "lcd"; power-supply = <&lcd_3v3>; + envdd-supply = <&lcd_3v3>; port { lcd_in: endpoint { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index bdaf30c8c405716ad2f1e434ac8abbd40bcdb786..90b5c7148feb5a6c20763741628fd1e4c41e3909 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,6 +215,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <96>; + ti,hwmods = "dma"; }; gpio1: gpio@48310000 { diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 2b48e51c372ab70122e13ee13d4f4a11722cd632..22c1eee9b07a28e27cd1a2d66e89100065a3ce7b 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -13,6 +13,10 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; + chosen { + stdout-path = &uart3; + }; + aliases { display0 = &dvi0; display1 = &hdmi0; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 64d00f5893a6341d9283d5d1c853a629c6aa11bc..1dc5a76b3c7106c9532f47c71c8052813b2492f9 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -51,6 +51,17 @@ }; }; + /* + * Note that 4430 needs cross trigger interface (CTI) supported + * before we can configure the interrupts. This means sampling + * events are not supported for pmu. Note that 4460 does not use + * CTI, see also 4460.dtsi. + */ + pmu { + compatible = "arm,cortex-a9-pmu"; + ti,hwmods = "debugss"; + }; + gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -163,6 +174,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2000 0x1000>; + ti,hwmods = "ctrl_module_core"; scm_conf: scm_conf@0 { compatible = "syscon"; @@ -175,9 +187,11 @@ omap4_padconf_core: scm@100000 { compatible = "ti,omap4-scm-padconf-core", "simple-bus"; + reg = <0x100000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x100000 0x1000>; + ti,hwmods = "ctrl_module_pad_core"; omap4_pmx_core: pinmux@40 { compatible = "ti,omap4-padconf", @@ -252,17 +266,33 @@ }; }; - omap4_pmx_wkup: pinmux@1e040 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x1e040 0x0038>; + omap4_scm_wkup: scm@c000 { + compatible = "ti,omap4-scm-wkup"; + reg = <0xc000 0x1000>; + ti,hwmods = "ctrl_module_wkup"; + }; + + omap4_padconf_wkup: padconf@1e000 { + compatible = "ti,omap4-scm-padconf-wkup", + "simple-bus"; + reg = <0x1e000 0x1000>; #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; + #size-cells = <1>; + ranges = <0 0x1e000 0x1000>; + ti,hwmods = "ctrl_module_pad_wkup"; + + omap4_pmx_wkup: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; }; }; }; @@ -282,6 +312,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + ti,hwmods = "dma_system"; }; gpio1: gpio@4a310000 { @@ -351,6 +382,19 @@ #interrupt-cells = <2>; }; + target-module@48076000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "slimbus2"; + reg = <0x48076000 0x4>, + <0x48076010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48076000 0x001000>; + + /* No child device binding or driver in mainline */ + }; + elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0x2000>; @@ -411,6 +455,57 @@ clock-frequency = <48000000>; }; + target-module@4a0db000 { + compatible = "ti,sysc-sr"; + ti,hwmods = "smartreflex_iva"; + reg = <0x4a0db000 0x4>, + <0x4a0db008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0db000 0x001000>; + + smartreflex_iva: smartreflex@0 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0 0x80>; + interrupts = ; + }; + }; + + target-module@4a0dd000 { + compatible = "ti,sysc-sr"; + ti,hwmods = "smartreflex_core"; + reg = <0x4a0dd000 0x4>, + <0x4a0dd008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0dd000 0x001000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0 0x80>; + interrupts = ; + }; + }; + + target-module@4a0d9000 { + compatible = "ti,sysc-sr"; + ti,hwmods = "smartreflex_mpu"; + reg = <0x4a0d9000 0x4>, + <0x4a0d9008 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a0d9000 0x001000>; + + smartreflex_mpu: smartreflex@0 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0 0x80>; + interrupts = ; + }; + }; + hwspinlock: spinlock@4a0f6000 { compatible = "ti,omap4-hwspinlock"; reg = <0x4a0f6000 0x1000>; @@ -489,6 +584,13 @@ dma-names = "tx0", "rx0", "tx1", "rx1"; }; + hdqw1w: 1w@480b2000 { + compatible = "ti,omap3-1w"; + reg = <0x480b2000 0x1000>; + interrupts = ; + ti,hwmods = "hdq1w"; + }; + mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; @@ -565,6 +667,40 @@ dma-names = "tx", "rx"; }; + hsi: hsi@4a058000 { + compatible = "ti,omap4-hsi"; + reg = <0x4a058000 0x4000>, + <0x4a05c000 0x1000>; + reg-names = "sys", "gdd"; + ti,hwmods = "hsi"; + + clocks = <&hsi_fck>; + clock-names = "hsi_fck"; + + interrupts = ; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a058000 0x4000>; + + hsi_port1: hsi-port@2000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x2000 0x800>, + <0x2800 0x800>; + reg-names = "tx", "rx"; + interrupts = ; + }; + + hsi_port2: hsi-port@3000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x3000 0x800>, + <0x3800 0x800>; + reg-names = "tx", "rx"; + interrupts = ; + }; + }; + mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -573,6 +709,19 @@ #iommu-cells = <0>; }; + target-module@52000000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "iss"; + reg = <0x52000000 0x4>, + <0x52000010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x52000000 0x1000000>; + + /* No child device binding, driver in staging */ + }; + mmu_ipu: mmu@55082000 { compatible = "ti,omap4-iommu"; reg = <0x55082000 0x100>; @@ -589,6 +738,14 @@ ti,hwmods = "wd_timer2"; }; + wdt3: wdt@40130000 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x40130000 0x80>, /* MPU private access */ + <0x49030000 0x80>; /* L3 Interconnect */ + interrupts = ; + ti,hwmods = "wd_timer3"; + }; + mcpdm: mcpdm@40132000 { compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ @@ -659,6 +816,56 @@ status = "disabled"; }; + target-module@40128000 { + compatible = "ti,sysc-mcasp"; + ti,hwmods = "mcasp"; + reg = <0x40128004 0x4>; + reg-names = "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40128000 0x1000>, /* MPU */ + <0x49028000 0x49028000 0x1000>; /* L3 */ + + /* + * Child device unsupported by davinci-mcasp. At least + * RX path is disabled for omap4, and only DIT mode + * works with no I2S. See also old Android kernel + * omap-mcasp driver for more information. + */ + }; + + target-module@4012c000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "slimbus1"; + reg = <0x4012c000 0x4>, + <0x4012c010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */ + <0x4902c000 0x4902c000 0x1000>; /* L3 */ + + /* No child device binding or driver in mainline */ + }; + + target-module@401f1000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "aess"; + reg = <0x401f1000 0x4>, + <0x401f1010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */ + <0x490f1000 0x490f1000 0x1000>; /* L3 */ + + /* + * No child device binding or driver in mainline. + * See Android tree and related upstreaming efforts + * for the old driver. + */ + }; + mcbsp4: mcbsp@48096000 { compatible = "ti,omap4-mcbsp"; reg = <0x48096000 0xff>; /* L4 Interconnect */ @@ -747,6 +954,19 @@ }; }; + target-module@4a10a000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "fdif"; + reg = <0x4a10a000 0x4>, + <0x4a10a010 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a10a000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; @@ -962,6 +1182,22 @@ status = "disabled"; }; + target-module@56000000 { + compatible = "ti,sysc-omap4"; + ti,hwmods = "gpu"; + reg = <0x5601fc00 0x4>, + <0x5601fc10 0x4>; + reg-names = "rev", "sysc"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; + dss: dss@58000000 { compatible = "ti,omap4-dss"; reg = <0x58000000 0x80>; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7824b2631cb6b3f93ffaedbaff5ebc65d6064292..575ecffb0e9e47cfda8373c22071de12e8789302 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -14,6 +14,10 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart3; + }; + vmain: fixedregulator-vmain { compatible = "regulator-fixed"; regulator-name = "vmain"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index eaff2a5751ddc11c5b1ec901a60c6f7c671aabac..4cd0005e462f7a0b88577a578d0baff8f2b13714 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -194,7 +194,7 @@ pbias_mmc_reg: pbias_mmc_omap5 { regulator-name = "pbias_mmc_omap5"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; }; }; }; @@ -295,6 +295,7 @@ #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + ti,hwmods = "dma_system"; }; gpio1: gpio@4ae10000 { diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts new file mode 100644 index 0000000000000000000000000000000000000000..ea4e01bce8d14fe005316187b1c4b4c7c809c345 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts @@ -0,0 +1,44 @@ +/* + * Cubietech CubieBoard6 + * + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "owl-s500.dtsi" + +/ { + compatible = "cubietech,cubieboard6", "actions,s500"; + model = "CubieBoard6"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart3_clk>; +}; diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts index 521463d4cac6a22f966a81df75a38e9491237a50..7be1d2eaf3f06904bbbc33a1b65d1063853a339a 100644 --- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts +++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts @@ -19,8 +19,15 @@ chosen { stdout-path = "serial3:115200n8"; }; + + uart3_clk: uart3-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; }; &uart3 { status = "okay"; + clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 51a48741d4c015aff87904b26471d887bd271831..43c9980a4260cf1c5b5fa1b23c3dfe84ac4a9252 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -7,6 +7,7 @@ */ #include +#include / { compatible = "actions,s500"; @@ -43,6 +44,7 @@ compatible = "arm,cortex-a9"; reg = <0x2>; enable-method = "actions,s500-smp"; + power-domains = <&sps S500_PD_CPU2>; }; cpu3: cpu@3 { @@ -50,6 +52,7 @@ compatible = "arm,cortex-a9"; reg = <0x3>; enable-method = "actions,s500-smp"; + power-domains = <&sps S500_PD_CPU3>; }; }; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index 46aa6db8353ac3bc1dfa9f2af943d0fee15551c7..c2b48a1838eb2fafbe0c492017be28d757607fc7 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -207,7 +207,7 @@ }; }; - gpio0: gpio@000000 { + gpio0: gpio@0 { compatible = "oxsemi,ox810se-gpio"; reg = <0x000000 0x100000>; interrupts = <21>; @@ -296,7 +296,7 @@ compatible = "simple-bus"; ranges = <0 0x45000000 0x1000000>; - sys: sys-ctrl@000000 { + sys: sys-ctrl@0 { compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; reg = <0x000000 0x100000>; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index 459207536a46654246517adfdd62cd6a38629202..085bbd33eadc25a4dc1d3fe6d635794c978b716f 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -173,7 +173,7 @@ }; }; - gpio0: gpio@000000 { + gpio0: gpio@0 { compatible = "oxsemi,ox820-gpio"; reg = <0x000000 0x100000>; interrupts = ; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index 533919e96eaee8f70054a42e5e66db433143d6a4..a1266cf8776ce9aea1e13ef62bad3474161cbba0 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -124,7 +124,7 @@ #size-cells = <1>; ranges = <0 0x200000 0x80000>; - rtc0: rtc@00000 { + rtc0: rtc@0 { compatible = "picochip,pc3x2-rtc"; clock-freq = <200000000>; reg = <0x00000 0xf>; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index ab3e80085511fef0a3911e4d9fc67d2f2d7c0d70..d78cd207eca1ac319841248a59629984e898e002 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -223,7 +223,7 @@ #size-cells = <1>; ranges = <0 0x200000 0x80000>; - rtc0: rtc@00000 { + rtc0: rtc@0 { compatible = "picochip,pc3x2-rtc"; clock-freq = <200000000>; reg = <0x00000 0xf>; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 3139221737eeba04f3926b544225680a425ccb04..be5177221cbbc3fc12d23d51271498ac26846bd4 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -127,12 +127,12 @@ }; }; - usb0: ohci@00700000 { + usb0: ohci@700000 { status = "okay"; num-ports = <2>; }; - usb1: ehci@00800000 { + usb1: ehci@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 9d725f983282511f7dae7961b6d5748a48761f97..497bb065eb9d3ca886ed2db2dce00dc3d9411848 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -397,23 +397,23 @@ xoadc-ref-supply = <&pm8058_l18>; /* Board-specific channels */ - mpp5@05 { + mpp5@5 { /* Connected to AOUT of ALS sensor */ reg = <0x00 0x05>; }; - mpp6@06 { + mpp6@6 { /* Connected to test point TP43 */ reg = <0x00 0x06>; }; - mpp7@07 { + mpp7@7 { /* Connected to battery thermistor */ reg = <0x00 0x07>; }; - mpp8@08 { + mpp8@8 { /* Connected to battery ID detector */ reg = <0x00 0x08>; }; - mpp9@09 { + mpp9@9 { /* Connected to XO thermistor */ reg = <0x00 0x09>; }; @@ -512,7 +512,7 @@ pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi12_i2c_pins>; - ak8975@0c { + ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 6089c8d56cd549c6476a519bb5efe82f29258315..3ca96e3618787be4931ed1c22b3192547ac0ac13 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -591,6 +591,7 @@ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; + status = "disabled"; }; }; @@ -907,11 +908,11 @@ usb_hs1_phy: phy { compatible = "qcom,usb-hs-phy-apq8064", "qcom,usb-hs-phy"; - #phy-cells = <0>; clocks = <&sleep_clk>, <&cxo_board>; clock-names = "sleep", "ref"; resets = <&usb1 0>; reset-names = "por"; + #phy-cells = <0>; }; }; }; @@ -1264,6 +1265,7 @@ dsi0_phy: dsi-phy@4700200 { compatible = "qcom,dsi-phy-28nm-8960"; #clock-cells = <1>; + #phy-cells = <0>; reg = <0x04700200 0x100>, <0x04700300 0x200>, @@ -1418,6 +1420,7 @@ clocks = <&mmcc HDMI_S_AHB_CLK>; clock-names = "slave_iface_clk"; + #phy-cells = <0>; }; mdp: mdp@5100000 { diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 221c4584552f9df40ababa4dc3cc22c2216d0811..33030f9419fefdbf267e4e7ce1e0947def1c77e0 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -124,6 +124,73 @@ reg = <0x900000 0x4000>; }; + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16500000 0x100>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi6_serial: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x1000>, + <0x16500000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gsbi7: gsbi@16600000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; gsbi8: gsbi@19800000 { compatible = "qcom,gsbi-v1.0.0"; @@ -317,37 +384,37 @@ #size-cells = <0>; #io-channel-cells = <2>; - vcoin: adc-channel@00 { + vcoin: adc-channel@0 { reg = <0x00 0x00>; }; - vbat: adc-channel@01 { + vbat: adc-channel@1 { reg = <0x00 0x01>; }; - dcin: adc-channel@02 { + dcin: adc-channel@2 { reg = <0x00 0x02>; }; - ichg: adc-channel@03 { + ichg: adc-channel@3 { reg = <0x00 0x03>; }; - vph_pwr: adc-channel@04 { + vph_pwr: adc-channel@4 { reg = <0x00 0x04>; }; - usb_vbus: adc-channel@0a { + usb_vbus: adc-channel@a { reg = <0x00 0x0a>; }; - die_temp: adc-channel@0b { + die_temp: adc-channel@b { reg = <0x00 0x0b>; }; - ref_625mv: adc-channel@0c { + ref_625mv: adc-channel@c { reg = <0x00 0x0c>; }; - ref_1250mv: adc-channel@0d { + ref_1250mv: adc-channel@d { reg = <0x00 0x0d>; }; - ref_325mv: adc-channel@0e { + ref_325mv: adc-channel@e { reg = <0x00 0x0e>; }; - ref_muxoff: adc-channel@0f { + ref_muxoff: adc-channel@f { reg = <0x00 0x0f>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts new file mode 100644 index 0000000000000000000000000000000000000000..d0a5df90b543bfa63f201ee1cf14fd3a9b7d0ac4 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -0,0 +1,321 @@ +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include +#include +#include + + +/ { + model = "Fairphone 2"; + compatible = "fairphone,fp2", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + smd { + rpm { + rpm_requests { + pm8841-regulators { + s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; +}; + +&soc { + serial@f991e000 { + status = "ok"; + }; + + pinctrl@fd510000 { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + }; + + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; +}; + +&spmi_bus { + pm8941@0 { + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio1", "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts new file mode 100644 index 0000000000000000000000000000000000000000..e87f2c99060d46fd829e1a1619739349bf61ced3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts @@ -0,0 +1,641 @@ +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include +#include +#include + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + }; + + smd { + rpm { + rpm_requests { + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-system-load = <154000>; + }; + + s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&msmgpio 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&soc { + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + sdhci@f9864900 { + status = "ok"; + + max-frequency = <100000000>; + non-removable; + vmmc-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + + sdhci@f98a4900 { + status = "ok"; + + bus-width = <4>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + }; + + serial@f991e000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_pin_a>; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + + pinctrl@fd510000 { + blsp1_uart2_pin_a: blsp1-uart2-pin-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + + drive-strength = <4>; + bias-disable; + }; + }; + + i2c8_pins: i2c8 { + mux { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + + drive-strength = <2>; + bias-disable; + }; + }; + + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "gpio40"; + function = "sdc3"; + + drive-strength = <10>; + bias-disable; + }; + + cmd { + pins = "gpio39"; + function = "sdc3"; + + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: synaptics { + pin { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + }; + + i2c@f9964000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_pins>; + + synaptics@2c { + compatible = "syna,rmi-i2c"; + reg = <0x2c>; + + interrupt-parent = <&msmgpio>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; + }; + + i2c@f9967000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + }; +}; + +&spmi_bus { + pm8941@0 { + charger@1000 { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; + }; + + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = ; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = ; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = ; + input-disable; + output-low; + }; + + }; + + coincell@2800 { + status = "ok"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 33002fed8cc3023d4e08a4f942c9bd0193439be5..d9019a49b292d8301b9e39616cc013871319bfb3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -18,27 +18,27 @@ #size-cells = <1>; ranges; - mpss@08000000 { + mpss@8000000 { reg = <0x08000000 0x5100000>; no-map; }; - mba@00d100000 { + mba@d100000 { reg = <0x0d100000 0x100000>; no-map; }; - reserved@0d200000 { + reserved@d200000 { reg = <0x0d200000 0xa00000>; no-map; }; - adsp_region: adsp@0dc00000 { + adsp_region: adsp@dc00000 { reg = <0x0dc00000 0x1900000>; no-map; }; - venus@0f500000 { + venus@f500000 { reg = <0x0f500000 0x500000>; no-map; }; @@ -48,17 +48,17 @@ no-map; }; - tz@0fc00000 { + tz@fc00000 { reg = <0x0fc00000 0x160000>; no-map; }; - rfsa@0fd60000 { + rfsa@fd60000 { reg = <0x0fd60000 0x20000>; no-map; }; - rmtfs@0fd80000 { + rmtfs@fd80000 { reg = <0x0fd80000 0x180000>; no-map; }; @@ -614,6 +614,20 @@ status = "disabled"; }; + sdhci@f9864900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + sdhci@f98a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..6740a4cb7da8db0206253b7a4ffa7e67c3664f9b --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -0,0 +1,18 @@ +#include "qcom-msm8974.dtsi" + +/ { + soc { + sdhci@f9824900 { + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, + <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; + clock-names = "core", "iface", "xo", "cal", "sleep"; + }; + + clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974pro"; + }; + }; +}; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index a1b2aef984f635ce31d90061ff3e14c22c156d84..779f724b4531defa1eebf6cf5a179a4b8bb1dcc6 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -11,6 +11,8 @@ /dts-v1/; #include "r7s72100.dtsi" +#include +#include / { model = "GR-Peach"; @@ -28,7 +30,6 @@ memory@20000000 { device_type = "memory"; reg = <0x20000000 0x00a00000>; - }; lbsc { @@ -51,6 +52,44 @@ reg = <0x00600000 0x00200000>; }; }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led1 { + gpios = <&port6 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + scif2_pins: serial2 { + /* P6_2 as RxD2; P6_3 as TxD2 */ + pinmux = , ; + }; + + ether_pins: ether { + /* Ethernet on Ports 1,3,5,10 */ + pinmux = , /* P1_14 = ET_COL */ + , /* P3_0 = ET_TXCLK */ + , /* P3_3 = ET_MDIO */ + , /* P3_4 = ET_RXCLK */ + , /* P3_5 = ET_RXER */ + , /* P3_6 = ET_RXDV */ + , /* P5_9 = ET_MDC */ + , /* P10_1 = ET_TXER */ + , /* P10_2 = ET_TXEN */ + , /* P10_3 = ET_CRS */ + , /* P10_4 = ET_TXD0 */ + , /* P10_5 = ET_TXD1 */ + , /* P10_6 = ET_TXD2 */ + , /* P10_7 = ET_TXD3 */ + , /* P10_8 = ET_RXD0 */ + , /* P10_9 = ET_RXD1 */ + ,/* P10_10 = ET_RXD2 */ + ;/* P10_11 = ET_RXD3 */ + }; }; &extal_clk { @@ -61,6 +100,38 @@ clock-frequency = <48000000>; }; +&mtu2 { + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + &scif2 { + pinctrl-names = "default"; + pinctrl-0 = <&scif2_pins>; + + status = "okay"; +}; + +ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; + status = "okay"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + + phy0: ethernet-phy@0 { + reg = <0>; + + reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <5>; + }; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 4ed12a4d9d51382143357585358f20081e216b35..ab9645a42eca3811084c7b09cfddfdeebd497f81 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -203,6 +203,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <400000000>; + clocks = <&cpg_clocks R7S72100_CLK_I>; next-level-cache = <&L2>; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 310222634570d98f19cbad69b3473ba6d0e20798..dd4d09712a2a3a8885bbb99889494742a9cc945d 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -27,6 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; clock-frequency = <1500000000>; power-domains = <&pd_a2sl>; next-level-cache = <&L2_CA15>; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts new file mode 100644 index 0000000000000000000000000000000000000000..d90eb8464222e33d2682523f7288f561c38e44af --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" +#include "iwg20d-q7-dbcm-ca.dtsi" + +/ { + model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 081af01928519e333deef4ac6ab1e579419aa08a..6aa6b7467704bc30dc72435b23e8611a17548927 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the iWave-RZG1M Qseven carrier board + * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. * @@ -10,47 +10,9 @@ /dts-v1/; #include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" / { model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; - - aliases { - serial0 = &scif0; - ethernet0 = &avb; - }; -}; - -&pfc { - scif0_pins: scif0 { - groups = "scif0_data_d"; - function = "scif0"; - }; - - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - micrel,led-mode = <1>; - }; }; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index ff799381863763decedb115e645980670d973b5b..75a8ca5718463e67701d072581beb324eed6858c 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -9,6 +9,7 @@ */ #include "r8a7743.dtsi" +#include / { compatible = "iwave,g20m", "renesas,r8a7743"; @@ -42,6 +43,17 @@ groups = "mmc_data8_b", "mmc_ctrl"; function = "mmc"; }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; }; &mmcif0 { @@ -53,3 +65,34 @@ non-removable; status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 14222c72f0e0f7d5ad95a46d68b310df76fff6cc..7bbba4a36f31814979e1ff3c8e79a2972be65b73 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -25,6 +25,13 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &iic0; + i2c7 = &iic1; + i2c8 = &iic3; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus { @@ -56,6 +63,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -101,7 +109,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -116,7 +124,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -131,7 +139,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -146,7 +154,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -161,7 +169,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -176,7 +184,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -191,7 +199,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -206,7 +214,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -348,6 +356,34 @@ dma-channels = <15>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + /* The memory map in the User's Manual maps the cores to bus * numbers */ @@ -436,6 +472,58 @@ status = "disabled"; }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -779,6 +867,241 @@ max-frequency = <97500000>; status = "disabled"; }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7743", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7743", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + + /* + * pci1 and xhci share the same phy, therefore only one of them + * can be active at any one time. If both of them are enabled, + * a race condition will determine who'll control the phy. + * A firmware file is needed by the xhci driver in order for + * USB 3.0 to work properly. + */ + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7743", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = ; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee100000 0 0x328>; + interrupts = ; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee140000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7743"; + reg = <0 0xee160000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7743", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7743", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; }; /* External root clock */ diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts new file mode 100644 index 0000000000000000000000000000000000000000..52153ec3638cff22cc697125d4ccb7135dbd4308 --- /dev/null +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -0,0 +1,109 @@ +/* + * Device Tree Source for the iWave-RZG1E SODIMM carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7745-iwg22m.dtsi" + +/ { + model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E"; + compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"; + + aliases { + serial0 = &scif4; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&pfc { + scif4_pins: scif4 { + groups = "scif4_data_b"; + function = "scif4"; + }; + + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif4 { + pinctrl-0 = <&scif4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + /* + * On some older versions of the platform (before R4.0) the phy address + * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. + */ + reg = <3>; + micrel,led-mode = <1>; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ed9a8cf3fe36c01375b0bc15f478075dbf4476ea --- /dev/null +++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi @@ -0,0 +1,111 @@ +/* + * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7745.dtsi" +#include + +/ { + compatible = "iwave,g22m", "renesas,r8a7745"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x20000000>; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + mmcif0_pins: mmc { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + i2c3_pins: i2c3 { + groups = "i2c3_b"; + function = "i2c3"; + }; +}; + +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index aff90dfb8b32169c1cf0c4cf98adc7a090ce5419..3a50f703601c467032e3adcada00206511b9546d 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -18,6 +18,19 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -65,6 +78,111 @@ resets = <&cpg 408>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7745", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + irqc: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7745", "renesas,irqc"; #interrupt-cells = <2>; @@ -508,6 +626,317 @@ #size-cells = <0>; status = "disabled"; }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7745", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = ; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7745", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = ; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + max-frequency = <97500000>; + status = "disabled"; + }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7745", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7745", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7745"; + reg = <0 0xee100000 0 0x328>; + interrupts = ; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7745"; + reg = <0 0xee140000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7745"; + reg = <0 0xee160000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7745", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; }; /* External root clock */ diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 8f3156c0e5754b090e6d06efe1d47faf95fda57a..a39472aab8672330c3ab0816525efd25333d0db6 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -33,6 +33,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <800000000>; + clocks = <&z_clk>; }; }; @@ -88,7 +89,7 @@ }; gpio0: gpio@ffc40000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc40000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -99,7 +100,7 @@ }; gpio1: gpio@ffc41000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc41000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -110,7 +111,7 @@ }; gpio2: gpio@ffc42000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc42000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -121,7 +122,7 @@ }; gpio3: gpio@ffc43000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc43000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -132,7 +133,7 @@ }; gpio4: gpio@ffc44000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc44000 0x2c>; interrupts = ; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 8ee0b2ca5d39a26556b570c6e529c1eeab2f42f3..e8eb94748b27efd2252598768240f2ed6fd1f5b6 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -29,12 +29,14 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM1>; }; cpu@2 { @@ -42,6 +44,7 @@ compatible = "arm,cortex-a9"; reg = <2>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM2>; }; cpu@3 { @@ -49,6 +52,7 @@ compatible = "arm,cortex-a9"; reg = <3>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM3>; }; }; @@ -76,7 +80,7 @@ }; gpio0: gpio@ffc40000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc40000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -87,7 +91,7 @@ }; gpio1: gpio@ffc41000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc41000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -98,7 +102,7 @@ }; gpio2: gpio@ffc42000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc42000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -109,7 +113,7 @@ }; gpio3: gpio@ffc43000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc43000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -120,7 +124,7 @@ }; gpio4: gpio@ffc44000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc44000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -131,7 +135,7 @@ }; gpio5: gpio@ffc45000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc45000 0x2c>; interrupts = ; #gpio-cells = <2>; @@ -142,7 +146,7 @@ }; gpio6: gpio@ffc46000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc46000 0x2c>; interrupts = ; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index ba100a6f67ca554c1b7068ba60e83090a0338ff4..e3d27783b6b56b42879b86a2eece9fe3ec6e3230 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -316,11 +316,8 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7790_CLK_DU0>, - <&mstp7_clks R8A7790_CLK_DU1>, - <&mstp7_clks R8A7790_CLK_DU2>, - <&mstp7_clks R8A7790_CLK_LVDS0>, - <&mstp7_clks R8A7790_CLK_LVDS1>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 16358bf8d1dbffdceceeb53124bf45dea8ae31ec..2f017fee4009a2242c3a808c5aa07e29eac36ee9 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -10,7 +10,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -52,10 +52,11 @@ reg = <0>; clock-frequency = <1300000000>; voltage-tolerance = <1>; /* 1% */ - clocks = <&cpg_clocks R8A7790_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -71,8 +72,10 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -80,8 +83,10 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu3: cpu@3 { @@ -89,8 +94,10 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu4: cpu@100 { @@ -98,8 +105,10 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu5: cpu@101 { @@ -107,8 +116,10 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu6: cpu@102 { @@ -116,8 +127,10 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU2>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu7: cpu@103 { @@ -125,8 +138,10 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU3>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; L2_CA15: cache-controller-0 { @@ -185,13 +200,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7790_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -199,12 +215,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -212,12 +229,13 @@ gpio-ranges = <&pfc 0 32 30>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -225,12 +243,13 @@ gpio-ranges = <&pfc 0 64 30>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -238,12 +257,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -251,12 +271,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -264,8 +285,9 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; thermal: thermal@e61f0000 { @@ -274,8 +296,9 @@ "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; - clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; + clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <0>; }; @@ -292,9 +315,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7790_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -312,9 +336,10 @@ , , ; - clocks = <&mstp3_clks R8A7790_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -330,8 +355,9 @@ , , ; - clocks = <&mstp4_clks R8A7790_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -358,9 +384,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -389,9 +416,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -418,9 +446,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -447,9 +476,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>; + clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <13>; }; @@ -460,8 +490,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; + clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 330>; #dma-cells = <1>; dma-channels = <2>; }; @@ -472,8 +503,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; + clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 331>; #dma-cells = <1>; dma-channels = <2>; }; @@ -484,8 +516,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -496,8 +529,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -508,8 +542,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -520,8 +555,9 @@ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -533,11 +569,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -548,11 +585,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 323>; status = "disabled"; }; @@ -563,11 +601,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_IIC2>; + clocks = <&cpg CPG_MOD 300>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>, <&dmac1 0x69>, <&dmac1 0x6a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 300>; status = "disabled"; }; @@ -578,11 +617,12 @@ "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; + clocks = <&cpg CPG_MOD 926>; dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -590,11 +630,12 @@ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -604,11 +645,12 @@ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; + clocks = <&cpg CPG_MOD 305>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, <&dmac1 0xe1>, <&dmac1 0xe2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 305>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -623,12 +665,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -636,12 +679,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 313>; dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; status = "disabled"; }; @@ -649,12 +693,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -662,12 +707,13 @@ compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -676,12 +722,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -690,12 +737,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -704,12 +752,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -718,12 +767,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -732,12 +782,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -746,12 +797,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -760,13 +812,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -775,13 +828,14 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -790,13 +844,14 @@ "renesas,scif"; reg = <0 0xe6e56000 0 64>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 310>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 310>; status = "disabled"; }; @@ -805,13 +860,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -820,13 +876,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -852,8 +909,9 @@ compatible = "renesas,ether-r8a7790"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -865,8 +923,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -876,8 +935,9 @@ compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_SATA0>; + clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 815>; status = "disabled"; }; @@ -885,8 +945,9 @@ compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; reg = <0 0xee500000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_SATA1>; + clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 814>; status = "disabled"; }; @@ -894,11 +955,12 @@ compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -911,9 +973,10 @@ reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; clock-names = "usbhs"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; usb0: usb-channel@0 { @@ -930,8 +993,9 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -939,8 +1003,9 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -948,8 +1013,9 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; @@ -957,41 +1023,46 @@ compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + clocks = <&cpg CPG_MOD 808>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 808>; status = "disabled"; }; - vsp1@fe920000 { + vsp@fe920000 { compatible = "renesas,vsp1"; reg = <0 0xfe920000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; + clocks = <&cpg CPG_MOD 130>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 130>; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; + clocks = <&cpg CPG_MOD 127>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 127>; }; du: display@feb00000 { @@ -1003,11 +1074,9 @@ interrupts = , , ; - clocks = <&mstp7_clks R8A7790_CLK_DU0>, - <&mstp7_clks R8A7790_CLK_DU1>, - <&mstp7_clks R8A7790_CLK_DU2>, - <&mstp7_clks R8A7790_CLK_LVDS0>, - <&mstp7_clks R8A7790_CLK_LVDS1>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>, + <&cpg CPG_MOD 725>; clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; status = "disabled"; @@ -1037,10 +1106,11 @@ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, - <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7790_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -1048,10 +1118,11 @@ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, - <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7790_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -1059,443 +1130,77 @@ compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; - clocks = <&mstp1_clks R8A7790_CLK_JPU>; + clocks = <&cpg CPG_MOD 106>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 106>; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overriden by the board. */ - clock-frequency = <0>; - }; - - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* - * The external audio clocks are configured as 0 Hz fixed frequency clocks by - * default. Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7790-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "sd1", - "z", "rcan", "adsp"; - #power-domain-cells = <0>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc1_clk: mmc1@e6150244 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150244 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssp_clk: ssp@e6150248 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150248 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssprs_clk: ssprs@e615024c { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615024c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - z2_clk: z2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - i_clk: i { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - b_clk: b { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cl_clk: cl { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - imp_clk: imp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - oscclk_clk: oscclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(12 * 1024)>; - clock-mult = <1>; - }; - zb3_clk: zb3 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - zb3d2_clk: zb3d2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - ddr_clk: ddr { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7790_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>, - <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>, - <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, - <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1 - R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1 - R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC - R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0 - R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 - R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 - R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S - >; - clock-output-names = - "vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1", - "tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1", - "fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0", - "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 - R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 - R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 - R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "msiof3", "scifb2", - "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>, - <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3 - R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 - R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 - R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1 - >; - clock-output-names = - "iic2", "tpu0", "mmcif1", "scif2", "sdhi3", - "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "iic0", "pciec", "iic1", "ssusb", "cmt1", - "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7790_CLK_ADSP>, - <&extal_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 - R8A7790_CLK_ADSP_MOD R8A7790_CLK_THERMAL - R8A7790_CLK_PWM - >; - clock-output-names = "audmac0", "audmac1", "adsp_mod", - "thermal", "pwm"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, - <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1 - R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0 - R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0 - R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0 - >; - clock-output-names = - "ehci", "hsusb", "hscif1", "hscif0", "scif1", - "scif0", "du2", "du1", "du0", "lvds1", "lvds0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 - R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 - R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER - R8A7790_CLK_SATA1 R8A7790_CLK_SATA0 - >; - clock-output-names = - "mlb", "vin3", "vin2", "vin1", "vin0", - "etheravb", "ether", "sata1", "sata0"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 - R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 - R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS - R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0 - >; - clock-output-names = - "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "rcan1", "rcan0", "qspi_mod", "iic3", - "i2c3", "i2c2", "i2c1", "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, - <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>; - - #clock-cells = <1>; - clock-indices = < - R8A7790_CLK_SSI_ALL - R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5 - R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0 - R8A7790_CLK_SCU_ALL - R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0 - R8A7790_CLK_SCU_CTU1_MIX1 R8A7790_CLK_SCU_CTU0_MIX0 - R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5 - R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0 - >; - clock-output-names = - "ssi-all", - "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", - "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", - "scu-all", - "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", - "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7790-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; }; prr: chipid@ff000044 { @@ -1518,11 +1223,12 @@ compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1534,11 +1240,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = ; - clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + clocks = <&cpg CPG_MOD 0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1549,11 +1256,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + clocks = <&cpg CPG_MOD 208>; dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1564,11 +1272,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + clocks = <&cpg CPG_MOD 205>; dmas = <&dmac0 0x41>, <&dmac0 0x42>, <&dmac1 0x41>, <&dmac1 0x42>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 205>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1579,11 +1288,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6c90000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + clocks = <&cpg CPG_MOD 215>; dmas = <&dmac0 0x45>, <&dmac0 0x46>, <&dmac1 0x45>, <&dmac1 0x46>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 215>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1593,8 +1303,9 @@ compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = ; - clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + clocks = <&cpg CPG_MOD 328>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 328>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1606,8 +1317,9 @@ reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <0 0>; @@ -1639,8 +1351,9 @@ reg = <0 0xee0b0000 0 0xc00>, <0 0xee0a0000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <1 1>; @@ -1657,8 +1370,9 @@ pci2: pci@ee0d0000 { compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = ; @@ -1707,9 +1421,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 319>; status = "disabled"; }; @@ -1728,21 +1443,22 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, - <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, - <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, - <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, - <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, - <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, - <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, - <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, - <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, - <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, - <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7790_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1753,6 +1469,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ce0b278e1cbe2bf44113586460953edd6ab5f7d..e164eda69baf3fd02a8392cb432b4b9c00ec6f54 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -330,9 +330,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7791_CLK_DU0>, - <&mstp7_clks R8A7791_CLK_DU1>, - <&mstp7_clks R8A7791_CLK_LVDS0>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "lvds.0", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 95da5cb9d37ab8e50fab028bca63782dd422bf7c..eb374956294f6983bf0132d8e83da7a3a0a6100b 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -419,9 +419,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7791_CLK_DU0>, - <&mstp7_clks R8A7791_CLK_DU1>, - <&mstp7_clks R8A7791_CLK_LVDS0>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, <&x3_clk>, <&x16_clk>; clock-names = "du.0", "du.1", "lvds.0", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index f1d1a977215308e6cc831a6062780810c150b8a8..67831d0405f34492ed5724ab9a2df2b0e1b95b05 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -10,7 +10,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -51,7 +51,7 @@ reg = <0>; clock-frequency = <1500000000>; voltage-tolerance = <1>; /* 1% */ - clocks = <&cpg_clocks R8A7791_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7791_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; @@ -70,6 +70,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -117,13 +118,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7791_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -131,12 +133,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -144,12 +147,13 @@ gpio-ranges = <&pfc 0 32 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -157,12 +161,13 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -170,12 +175,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -183,12 +189,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -196,12 +203,13 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -209,12 +217,13 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -222,8 +231,9 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; + clocks = <&cpg CPG_MOD 904>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 904>; }; thermal: thermal@e61f0000 { @@ -232,8 +242,9 @@ "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; - clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; + clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <0>; }; @@ -250,9 +261,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7791_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -270,9 +282,10 @@ , , ; - clocks = <&mstp3_clks R8A7791_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -294,8 +307,9 @@ , , ; - clocks = <&mstp4_clks R8A7791_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -322,9 +336,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -353,9 +368,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -382,9 +398,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -411,9 +428,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>; + clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <13>; }; @@ -424,8 +442,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; + clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 330>; #dma-cells = <1>; dma-channels = <2>; }; @@ -436,8 +455,9 @@ interrupts = ; interrupt-names = "ch0", "ch1"; - clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; + clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 331>; #dma-cells = <1>; dma-channels = <2>; }; @@ -449,8 +469,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -461,8 +482,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -473,8 +495,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -485,8 +508,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -497,8 +521,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 927>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -510,8 +535,9 @@ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 925>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -524,11 +550,12 @@ "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + clocks = <&cpg CPG_MOD 926>; dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -539,11 +566,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -554,11 +582,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 323>; status = "disabled"; }; @@ -571,11 +600,12 @@ compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -585,12 +615,13 @@ compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -598,12 +629,13 @@ compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -611,12 +643,13 @@ compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -625,12 +658,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -639,12 +673,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -653,12 +688,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -667,12 +703,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; + clocks = <&cpg CPG_MOD 1106>; clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -681,12 +718,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; + clocks = <&cpg CPG_MOD 1107>; clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -695,12 +733,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; + clocks = <&cpg CPG_MOD 1108>; clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -709,12 +748,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -723,12 +763,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -737,12 +778,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -751,13 +793,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -766,22 +809,24 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; adc: adc@e6e54000 { compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; reg = <0 0xe6e54000 0 64>; - clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; + clocks = <&cpg CPG_MOD 901>; clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 901>; status = "disabled"; }; @@ -790,13 +835,14 @@ "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -805,13 +851,14 @@ "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>, + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -820,13 +867,14 @@ "renesas,scif"; reg = <0 0xe6ee0000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>, + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -835,13 +883,14 @@ "renesas,scif"; reg = <0 0xe6ee8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>, + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -850,13 +899,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -865,13 +915,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -880,13 +931,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -912,8 +964,9 @@ compatible = "renesas,ether-r8a7791"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -925,8 +978,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -936,8 +990,9 @@ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_SATA0>; + clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 815>; status = "disabled"; }; @@ -945,8 +1000,9 @@ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee500000 0 0x2000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_SATA1>; + clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 814>; status = "disabled"; }; @@ -954,11 +1010,12 @@ compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 704>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -971,9 +1028,10 @@ reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; clock-names = "usbhs"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; usb0: usb-channel@0 { @@ -990,8 +1048,9 @@ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -999,8 +1058,9 @@ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -1008,33 +1068,37 @@ compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7791_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; + clocks = <&cpg CPG_MOD 127>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 127>; }; du: display@feb00000 { @@ -1044,9 +1108,9 @@ reg-names = "du", "lvds.0"; interrupts = , ; - clocks = <&mstp7_clks R8A7791_CLK_DU0>, - <&mstp7_clks R8A7791_CLK_DU1>, - <&mstp7_clks R8A7791_CLK_LVDS0>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; clock-names = "du.0", "du.1", "lvds.0"; status = "disabled"; @@ -1071,10 +1135,11 @@ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, - <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7791_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -1082,10 +1147,11 @@ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, - <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7791_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -1093,435 +1159,78 @@ compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; - clocks = <&mstp1_clks R8A7791_CLK_JPU>; + clocks = <&cpg CPG_MOD 106>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 106>; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overriden by the board. */ - clock-frequency = <0>; - }; - - /* - * The external audio clocks are configured as 0 Hz fixed frequency clocks by - * default. Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7791-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z", - "rcan", "adsp"; - #power-domain-cells = <0>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssp_clk: ssp@e6150248 { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150248 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - ssprs_clk: ssprs@e615024c { - compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615024c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - i_clk: i { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - b_clk: b { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cl_clk: cl { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - oscclk_clk: oscclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(12 * 1024)>; - clock-mult = <1>; - }; - zb3_clk: zb3 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - zb3d2_clk: zb3d2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - ddr_clk: ddr { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7791_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>, - <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU - R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG - R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0 - R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 - R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 - R8A7791_CLK_VSP1_S - >; - clock-output-names = - "vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg", - "2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0", - "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 - R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 - R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 - R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2", - "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 - R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 - R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 - R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1 - >; - clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1", - "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7791_CLK_ADSP>, - <&extal_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 - R8A7791_CLK_ADSP_MOD R8A7791_CLK_THERMAL - R8A7791_CLK_PWM - >; - clock-output-names = "audmac0", "audmac1", "adsp_mod", - "thermal", "pwm"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&zx_clk>, <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 - R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 - R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 - R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0 - R8A7791_CLK_LVDS0 - >; - clock-output-names = - "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", - "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB - R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0 - R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER - R8A7791_CLK_SATA1 R8A7791_CLK_SATA0 - >; - clock-output-names = - "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", - "etheravb", "ether", "sata1", "sata0"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, - <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_GYROADC - R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 - R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 - R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 - R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 - R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 - >; - clock-output-names = - "gyroadc", - "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", - "i2c1", "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, - <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>; - - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_SSI_ALL - R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5 - R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0 - R8A7791_CLK_SCU_ALL - R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0 - R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0 - R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5 - R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0 - >; - clock-output-names = - "ssi-all", - "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", - "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", - "scu-all", - "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", - "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; - }; - mstp11_clks: mstp11_clks@e615099c { - compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5 - >; - clock-output-names = "scifa3", "scifa4", "scifa5"; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7791-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -1544,11 +1253,12 @@ compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1560,11 +1270,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = ; - clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + clocks = <&cpg CPG_MOD 000>; dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1575,11 +1286,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + clocks = <&cpg CPG_MOD 208>; dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1590,11 +1302,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + clocks = <&cpg CPG_MOD 205>; dmas = <&dmac0 0x41>, <&dmac0 0x42>, <&dmac1 0x41>, <&dmac1 0x42>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 205>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1604,8 +1317,9 @@ compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = ; - clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; + clocks = <&cpg CPG_MOD 328>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 328>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1617,8 +1331,9 @@ reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <0 0>; @@ -1650,8 +1365,9 @@ reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <1 1>; @@ -1697,9 +1413,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 319>; status = "disabled"; }; @@ -1778,21 +1495,22 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>, - <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>, - <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>, - <&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>, - <&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>, - <&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>, - <&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>, - <&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>, - <&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>, - <&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>, - <&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>, - <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7791_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1803,6 +1521,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index f3ea43b7b7243127b36cb783eb2ad082598fb5e2..9b67dca6c9ef550d49e2224c880c61eb5925f568 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -310,8 +310,7 @@ pinctrl-0 = <&du0_pins &du1_pins>; pinctrl-names = "default"; - clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, - <&x1_clk>, <&x2_clk>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index c24f26fdab1f8c1e67a186acb373b0cce3f52ada..b9471b67b72829de871def622002bcaf6ddbed8e 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -305,8 +305,7 @@ pinctrl-0 = <&du0_pins &du1_pins>; pinctrl-names = "default"; - clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, - <&osc2_clk>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>; clock-names = "du.0", "du.1", "dclkin.0"; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 2623f39bed2b73bb6f180a72e89586702a90f2cc..131f65b0426ea317ccfa4fa8fed0b015611bd48c 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -46,7 +46,7 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&z_clk>; + clocks = <&cpg CPG_CORE R8A7792_CLK_Z>; power-domains = <&sysc R8A7792_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; }; @@ -56,6 +56,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7792_CLK_Z>; power-domains = <&sysc R8A7792_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -92,9 +93,10 @@ <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7792_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; irqc: interrupt-controller@e61c0000 { @@ -106,8 +108,9 @@ , , ; - clocks = <&mstp4_clks R8A7792_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; timer { @@ -145,7 +148,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -153,13 +156,14 @@ gpio-ranges = <&pfc 0 0 29>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -167,13 +171,14 @@ gpio-ranges = <&pfc 0 32 23>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -181,13 +186,14 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -195,13 +201,14 @@ gpio-ranges = <&pfc 0 96 28>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -209,13 +216,14 @@ gpio-ranges = <&pfc 0 128 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -223,13 +231,14 @@ gpio-ranges = <&pfc 0 160 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055100 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055100 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -237,13 +246,14 @@ gpio-ranges = <&pfc 0 192 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; gpio7: gpio@e6055200 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055200 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -251,13 +261,14 @@ gpio-ranges = <&pfc 0 224 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO7>; + clocks = <&cpg CPG_MOD 904>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 904>; }; gpio8: gpio@e6055300 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055300 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -265,13 +276,14 @@ gpio-ranges = <&pfc 0 256 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO8>; + clocks = <&cpg CPG_MOD 921>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 921>; }; gpio9: gpio@e6055400 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -279,13 +291,14 @@ gpio-ranges = <&pfc 0 288 17>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO9>; + clocks = <&cpg CPG_MOD 919>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 919>; }; gpio10: gpio@e6055500 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055500 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -293,13 +306,14 @@ gpio-ranges = <&pfc 0 320 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO10>; + clocks = <&cpg CPG_MOD 914>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 914>; }; gpio11: gpio@e6055600 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055600 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -307,8 +321,9 @@ gpio-ranges = <&pfc 0 352 30>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7792_CLK_GPIO11>; + clocks = <&cpg CPG_MOD 913>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 913>; }; dmac0: dma-controller@e6700000 { @@ -336,9 +351,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -368,9 +384,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -380,13 +397,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -395,13 +413,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -410,13 +429,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -425,13 +445,14 @@ "renesas,rcar-gen2-scif", "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -440,13 +461,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -455,13 +477,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>, - <&scif_clk>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -490,8 +513,9 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; - clocks = <&mstp3_clks R8A7792_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -500,8 +524,9 @@ "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_JPU>; + clocks = <&cpg CPG_MOD 106>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 106>; }; avb: ethernet@e6800000 { @@ -509,8 +534,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -522,8 +548,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -535,8 +562,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -548,8 +576,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -561,8 +590,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -574,8 +604,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 927>; i2c-scl-internal-delay-ns = <6>; #address-cells = <1>; #size-cells = <0>; @@ -587,8 +618,9 @@ "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 925>; i2c-scl-internal-delay-ns = <110>; #address-cells = <1>; #size-cells = <0>; @@ -599,11 +631,12 @@ compatible = "renesas,qspi-r8a7792", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -615,11 +648,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = ; - clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>; + clocks = <&cpg CPG_MOD 000>; dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 000>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -630,11 +664,12 @@ "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = ; - clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>; + clocks = <&cpg CPG_MOD 208>; dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -646,8 +681,8 @@ reg-names = "du"; interrupts = , ; - clocks = <&mstp7_clks R8A7792_CLK_DU0>, - <&mstp7_clks R8A7792_CLK_DU1>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; status = "disabled"; @@ -673,10 +708,11 @@ "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_CAN0>, - <&rcan_clk>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -685,10 +721,11 @@ "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7792_CLK_CAN1>, - <&rcan_clk>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -697,8 +734,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -707,8 +745,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -717,8 +756,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; @@ -727,8 +767,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN3>; + clocks = <&cpg CPG_MOD 808>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 808>; status = "disabled"; }; @@ -737,8 +778,9 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef4000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN4>; + clocks = <&cpg CPG_MOD 805>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 805>; status = "disabled"; }; @@ -747,254 +789,47 @@ "renesas,rcar-gen2-vin"; reg = <0 0xe6ef5000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7792_CLK_VIN5>; + clocks = <&cpg CPG_MOD 804>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 804>; status = "disabled"; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_VSP1_SY>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_VSP1DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7792_CLK_VSP1DU1>; + clocks = <&cpg CPG_MOD 127>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 127>; }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7792-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7792-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; clocks = <&extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi"; + clock-names = "extal"; + #clock-cells = <2>; #power-domain-cells = <0>; }; - - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - z_clk: z { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL0>; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - sd_clk: sd { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rcan_clk: rcan { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <49>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7792_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <5>; - clock-mult = <1>; - }; - - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&m2_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_JPU - R8A7792_CLK_VSP1DU1 R8A7792_CLK_VSP1DU0 - R8A7792_CLK_VSP1_SY - >; - clock-output-names = "jpu", "vsp1du1", "vsp1du0", - "vsp1-sy"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_MSIOF1 - R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0 - >; - clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&sd_clk>; - #clock-cells = <1>; - renesas,clock-indices = ; - clock-output-names = "sdhi0"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_IRQC R8A7792_CLK_INTC_SYS - >; - clock-output-names = "irqc", "intc-sys"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0 - R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2 - R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0 - R8A7792_CLK_DU1 R8A7792_CLK_DU0 - >; - clock-output-names = "hscif1", "hscif0", "scif3", - "scif2", "scif1", "scif0", - "du1", "du0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&zg_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_VIN5 R8A7792_CLK_VIN4 - R8A7792_CLK_VIN3 R8A7792_CLK_VIN2 - R8A7792_CLK_VIN1 R8A7792_CLK_VIN0 - R8A7792_CLK_ETHERAVB - >; - clock-output-names = "vin5", "vin4", "vin3", "vin2", - "vin1", "vin0", "etheravb"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7792-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>, - <&cpg_clocks R8A7792_CLK_QSPI>, - <&cp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6 - R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4 - R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2 - R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0 - R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10 - R8A7792_CLK_CAN1 R8A7792_CLK_CAN0 - R8A7792_CLK_QSPI_MOD - R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8 - R8A7792_CLK_I2C5 R8A7792_CLK_I2C4 - R8A7792_CLK_I2C3 R8A7792_CLK_I2C2 - R8A7792_CLK_I2C1 R8A7792_CLK_I2C0 - >; - clock-output-names = - "gpio7", "gpio6", "gpio5", "gpio4", - "gpio3", "gpio2", "gpio1", "gpio0", - "gpio11", "gpio10", "can1", "can0", - "qspi_mod", "gpio9", "gpio8", - "i2c5", "i2c4", "i2c3", "i2c2", - "i2c1", "i2c0"; - }; }; /* External root clock */ diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 76e3aca2029e5f66de3263a1bf5273a0e5b119b0..51b3ffac8efaad1dbdc53ebe220f59c194f8585e 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -303,9 +303,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7793_CLK_DU0>, - <&mstp7_clks R8A7793_CLK_DU1>, - <&mstp7_clks R8A7793_CLK_LVDS0>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "lvds.0", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 497716b6fbe2416423b53b2fd3be3303bc60c92c..58eae569b4e0e3f0920f0e8d0cb4a19cd752d1fd 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -8,7 +8,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -43,7 +43,7 @@ reg = <0>; clock-frequency = <1500000000>; voltage-tolerance = <1>; /* 1% */ - clocks = <&cpg_clocks R8A7793_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7793_PD_CA15_CPU0>; @@ -62,6 +62,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU1>; }; @@ -108,13 +109,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7793_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -122,12 +124,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -135,12 +138,13 @@ gpio-ranges = <&pfc 0 32 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -148,12 +152,13 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -161,12 +166,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -174,12 +180,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -187,12 +194,13 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -200,12 +208,13 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -213,8 +222,9 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7793_CLK_GPIO7>; + clocks = <&cpg CPG_MOD 904>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 904>; }; thermal: thermal@e61f0000 { @@ -223,8 +233,9 @@ "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; - clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; + clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <0>; }; @@ -241,9 +252,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7793_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -261,9 +273,10 @@ , , ; - clocks = <&mstp3_clks R8A7793_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -285,8 +298,9 @@ , , ; - clocks = <&mstp4_clks R8A7793_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -313,9 +327,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -344,9 +359,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -373,9 +389,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -402,9 +419,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>; + clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <13>; }; @@ -416,8 +434,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 931>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -428,8 +447,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 930>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -440,8 +460,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 929>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -452,8 +473,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 928>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -464,8 +486,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 927>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -477,8 +500,9 @@ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 925>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -491,11 +515,12 @@ "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; + clocks = <&cpg CPG_MOD 926>; dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -506,11 +531,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -521,11 +547,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 323>; status = "disabled"; }; @@ -538,12 +565,13 @@ compatible = "renesas,sdhi-r8a7793"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -551,12 +579,13 @@ compatible = "renesas,sdhi-r8a7793"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -564,12 +593,13 @@ compatible = "renesas,sdhi-r8a7793"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -577,11 +607,12 @@ compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -592,12 +623,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -606,12 +638,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -620,12 +653,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -634,12 +668,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; + clocks = <&cpg CPG_MOD 1106>; clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -648,12 +683,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; + clocks = <&cpg CPG_MOD 1107>; clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -662,12 +698,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; + clocks = <&cpg CPG_MOD 1108>; clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -676,12 +713,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -690,12 +728,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -704,12 +743,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -718,13 +758,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -733,13 +774,14 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -748,13 +790,14 @@ "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -763,13 +806,14 @@ "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>, + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -778,13 +822,14 @@ "renesas,scif"; reg = <0 0xe6ee0000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>, + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -793,13 +838,14 @@ "renesas,scif"; reg = <0 0xe6ee8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>, + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -808,13 +854,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -823,13 +870,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -838,13 +886,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -870,8 +919,9 @@ compatible = "renesas,ether-r8a7793"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -882,8 +932,9 @@ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -891,8 +942,9 @@ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -900,8 +952,9 @@ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7793_CLK_VIN2>; + clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 809>; status = "disabled"; }; @@ -909,11 +962,12 @@ compatible = "renesas,qspi-r8a7793", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -927,9 +981,9 @@ reg-names = "du", "lvds.0"; interrupts = , ; - clocks = <&mstp7_clks R8A7793_CLK_DU0>, - <&mstp7_clks R8A7793_CLK_DU1>, - <&mstp7_clks R8A7793_CLK_LVDS0>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; clock-names = "du.0", "du.1", "lvds.0"; status = "disabled"; @@ -954,10 +1008,11 @@ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_RCAN0>, - <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -965,376 +1020,74 @@ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7793_CLK_RCAN1>, - <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* - * The external audio clocks are configured as 0 Hz fixed frequency clocks by - * default. Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7793-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z", - "rcan", "adsp"; - #power-domain-cells = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7793-div6-clock", - "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7793-div6-clock", - "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7793-div6-clock", - "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <5>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7793_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, - <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, - <&zs_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_VCP0 R8A7793_CLK_VPC0 - R8A7793_CLK_SSP1 R8A7793_CLK_TMU1 - R8A7793_CLK_3DG R8A7793_CLK_2DDMAC - R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0 - R8A7793_CLK_TMU3 R8A7793_CLK_TMU2 - R8A7793_CLK_CMT0 R8A7793_CLK_TMU0 - R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0 - R8A7793_CLK_VSP1_S - >; - clock-output-names = - "vcp0", "vpc0", "ssp_dev", "tmu1", - "pvrsrvkm", "tddmac", "fdp1", "fdp0", - "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", - "vsp1-du0", "vsps"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0 - R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2 - R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "scifb0", - "scifb1", "scifb2", "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, - <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, - <&rclk_clk>, <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2 - R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0 - R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0 - R8A7793_CLK_PCIEC R8A7793_CLK_IIC1 - R8A7793_CLK_SSUSB R8A7793_CLK_CMT1 - R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1 - >; - clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "i2c7", "pciec", "i2c8", "ssusb", "cmt1", - "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_IRQC R8A7793_CLK_INTC_SYS - >; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "audmac0", "audmac1", "thermal"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, - <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, - <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_EHCI R8A7793_CLK_HSUSB - R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5 - R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1 - R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3 - R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1 - R8A7793_CLK_SCIF0 R8A7793_CLK_DU1 - R8A7793_CLK_DU0 R8A7793_CLK_LVDS0 - >; - clock-output-names = - "ehci", "hsusb", "hscif2", "scif5", "scif4", - "hscif1", "hscif0", "scif3", "scif2", - "scif1", "scif0", "du1", "du0", "lvds0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7793-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, - <&p_clk>, <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2 - R8A7793_CLK_VIN1 R8A7793_CLK_VIN0 - R8A7793_CLK_ETHER R8A7793_CLK_SATA1 - R8A7793_CLK_SATA0 - >; - clock-output-names = - "ipmmu_sgx", "vin2", "vin1", "vin0", "ether", - "sata1", "sata0"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&p_clk>, <&p_clk>, - <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>, - <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6 - R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 - R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 - R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 - R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1 - R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5 - R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4 - R8A7793_CLK_I2C3 R8A7793_CLK_I2C2 - R8A7793_CLK_I2C1 R8A7793_CLK_I2C0 - >; - clock-output-names = - "gpio7", "gpio6", "gpio5", "gpio4", - "gpio3", "gpio2", "gpio1", "gpio0", - "rcan1", "rcan0", "qspi_mod", "i2c5", - "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", - "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, - <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>; - - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_SSI_ALL - R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5 - R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0 - R8A7793_CLK_SCU_ALL - R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0 - R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0 - R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5 - R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0 - >; - clock-output-names = - "ssi-all", - "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", - "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", - "scu-all", - "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", - "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; - }; - mstp11_clks: mstp11_clks@e615099c { - compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5 - >; - clock-output-names = "scifa3", "scifa4", "scifa5"; - }; + /* Special CPG clocks */ + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7793-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; }; rst: reset-controller@e6160000 { @@ -1428,19 +1181,20 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>, - <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>, - <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>, - <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>, - <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>, - <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>, - <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>, - <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>, - <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>, - <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>, - <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>, - <&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7793_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1449,6 +1203,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f1eea13cdf44371d84f63695aaf5ff812fc9a45c..bd98790d964e13a7afbf50c67ef9ce6a8e3490f6 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -167,8 +167,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU1>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x13_clk>, <&x2_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; @@ -305,7 +304,7 @@ vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; sd-uhs-sdr50; sd-uhs-sdr104; status = "okay"; @@ -319,7 +318,7 @@ vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; sd-uhs-sdr50; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 4cb5278d104dfcb3324c923cdd4346908f8d7586..edfad0e5ac53a0c124c07b66018cbd0ba8a4ea8a 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -423,8 +423,7 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU1>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x2_clk>, <&x3_clk>; clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 26535414203a0b1e43bab73a12ec16238c8b3b1b..905e50c9b524d2c4ac40e516f8238e15f48a2a50 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -9,7 +9,7 @@ * kind, whether express or implied. */ -#include +#include #include #include #include @@ -43,7 +43,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&z2_clk>; + clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>; power-domains = <&sysc R8A7794_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; @@ -53,6 +53,7 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>; power-domains = <&sysc R8A7794_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; @@ -75,13 +76,14 @@ <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = ; - clocks = <&mstp4_clks R8A7794_CLK_INTC_SYS>; + clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -89,12 +91,13 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO0>; + clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -102,12 +105,13 @@ gpio-ranges = <&pfc 0 32 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO1>; + clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -115,12 +119,13 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO2>; + clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -128,12 +133,13 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO3>; + clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -141,12 +147,13 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO4>; + clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -154,12 +161,13 @@ gpio-ranges = <&pfc 0 160 28>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO5>; + clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = ; #gpio-cells = <2>; @@ -167,8 +175,9 @@ gpio-ranges = <&pfc 0 192 26>; #interrupt-cells = <2>; interrupt-controller; - clocks = <&mstp9_clks R8A7794_CLK_GPIO6>; + clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; cmt0: timer@ffca0000 { @@ -176,9 +185,10 @@ reg = <0 0xffca0000 0 0x1004>; interrupts = , ; - clocks = <&mstp1_clks R8A7794_CLK_CMT0>; + clocks = <&cpg CPG_MOD 124>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 124>; renesas,channels-mask = <0x60>; @@ -196,9 +206,10 @@ , , ; - clocks = <&mstp3_clks R8A7794_CLK_CMT1>; + clocks = <&cpg CPG_MOD 329>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 329>; renesas,channels-mask = <0xff>; @@ -228,8 +239,9 @@ , , ; - clocks = <&mstp4_clks R8A7794_CLK_IRQC>; + clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; pfc: pin-controller@e6060000 { @@ -261,9 +273,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>; + clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; }; @@ -292,9 +305,10 @@ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12", "ch13", "ch14"; - clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; }; @@ -320,9 +334,10 @@ "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", "ch12"; - clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>; + clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <13>; }; @@ -332,12 +347,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; + clocks = <&cpg CPG_MOD 204>; clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -346,12 +362,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; + clocks = <&cpg CPG_MOD 203>; clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -360,12 +377,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; + clocks = <&cpg CPG_MOD 202>; clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -374,12 +392,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; + clocks = <&cpg CPG_MOD 1106>; clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1106>; status = "disabled"; }; @@ -388,12 +407,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; + clocks = <&cpg CPG_MOD 1107>; clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1107>; status = "disabled"; }; @@ -402,12 +422,13 @@ "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; interrupts = ; - clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; + clocks = <&cpg CPG_MOD 1108>; clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1108>; status = "disabled"; }; @@ -416,12 +437,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; + clocks = <&cpg CPG_MOD 206>; clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -430,12 +452,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; + clocks = <&cpg CPG_MOD 207>; clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -444,12 +467,13 @@ "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; interrupts = ; - clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; + clocks = <&cpg CPG_MOD 216>; clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 216>; status = "disabled"; }; @@ -458,13 +482,14 @@ "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 721>; status = "disabled"; }; @@ -473,13 +498,14 @@ "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 720>; status = "disabled"; }; @@ -488,13 +514,14 @@ "renesas,scif"; reg = <0 0xe6e58000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 719>; status = "disabled"; }; @@ -503,13 +530,14 @@ "renesas,scif"; reg = <0 0xe6ea8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>, + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 718>; status = "disabled"; }; @@ -518,13 +546,14 @@ "renesas,scif"; reg = <0 0xe6ee0000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>, + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 715>; status = "disabled"; }; @@ -533,13 +562,14 @@ "renesas,scif"; reg = <0 0xe6ee8000 0 64>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>, + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 714>; status = "disabled"; }; @@ -548,13 +578,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>, + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 717>; status = "disabled"; }; @@ -563,13 +594,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>, + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 716>; status = "disabled"; }; @@ -578,13 +610,14 @@ "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>, + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 713>; status = "disabled"; }; @@ -610,8 +643,9 @@ compatible = "renesas,ether-r8a7794"; reg = <0 0xee700000 0 0x400>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_ETHER>; + clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -623,8 +657,9 @@ "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -635,8 +670,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C0>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 931>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -647,8 +683,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C1>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 930>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -659,8 +696,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C2>; + clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 929>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -671,8 +709,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C3>; + clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 928>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -683,8 +722,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C4>; + clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 927>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -695,8 +735,9 @@ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_I2C5>; + clocks = <&cpg CPG_MOD 925>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 925>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -708,11 +749,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_IIC0>; + clocks = <&cpg CPG_MOD 318>; dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 318>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -723,11 +765,12 @@ "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_IIC1>; + clocks = <&cpg CPG_MOD 323>; dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 323>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -737,11 +780,12 @@ compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; + clocks = <&cpg CPG_MOD 315>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 315>; reg-io-width = <4>; status = "disabled"; }; @@ -750,12 +794,13 @@ compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee100000 0 0x328>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; + clocks = <&cpg CPG_MOD 314>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -763,12 +808,13 @@ compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee140000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; + clocks = <&cpg CPG_MOD 312>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -776,12 +822,13 @@ compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee160000 0 0x100>; interrupts = ; - clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; + clocks = <&cpg CPG_MOD 311>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -789,11 +836,12 @@ compatible = "renesas,qspi-r8a7794", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; + clocks = <&cpg CPG_MOD 917>; dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 917>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -804,8 +852,9 @@ compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_VIN0>; + clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 811>; status = "disabled"; }; @@ -813,8 +862,9 @@ compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; - clocks = <&mstp8_clks R8A7794_CLK_VIN1>; + clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 810>; status = "disabled"; }; @@ -824,8 +874,9 @@ reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <0 0>; @@ -857,8 +908,9 @@ reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; bus-range = <1 1>; @@ -888,8 +940,9 @@ compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = ; - clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 704>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -902,9 +955,10 @@ reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + clocks = <&cpg CPG_MOD 704>; clock-names = "usbhs"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; usb0: usb-channel@0 { @@ -917,20 +971,22 @@ }; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7794_CLK_VSP1_S>; + clocks = <&cpg CPG_MOD 131>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = ; - clocks = <&mstp1_clks R8A7794_CLK_VSP1_DU0>; + clocks = <&cpg CPG_MOD 128>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; du: display@feb00000 { @@ -939,8 +995,7 @@ reg-names = "du"; interrupts = , ; - clocks = <&mstp7_clks R8A7794_CLK_DU0>, - <&mstp7_clks R8A7794_CLK_DU1>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; status = "disabled"; @@ -965,10 +1020,11 @@ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_RCAN0>, - <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -976,434 +1032,73 @@ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; - clocks = <&mstp9_clks R8A7794_CLK_RCAN1>, - <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, + <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overriden by the board. */ - clock-frequency = <0>; - }; - - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* - * The external audio clocks are configured as 0 Hz fixed - * frequency clocks by default. Boards that provide audio - * clocks should override them. - */ - audio_clka: audio_clka { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clkb: audio_clkb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clkc: audio_clkc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@e6150000 { - compatible = "renesas,r8a7794-cpg-clocks", - "renesas,rcar-gen2-cpg-clocks"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk &usb_extal_clk>; - #clock-cells = <1>; - clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "rcan"; - #power-domain-cells = <0>; - }; - /* Variable factor clocks */ - sd2_clk: sd2@e6150078 { - compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - sd3_clk: sd3@e615026c { - compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615026c 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; - mmc0_clk: mmc0@e6150240 { - compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150240 0 4>; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - }; + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - z2_clk: z2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL0>; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - }; - zg_clk: zg { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - zx_clk: zx { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <3>; - clock-mult = <1>; - }; - zs_clk: zs { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <6>; - clock-mult = <1>; - }; - hp_clk: hp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - i_clk: i { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - b_clk: b { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <12>; - clock-mult = <1>; - }; - p_clk: p { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <24>; - clock-mult = <1>; - }; - cl_clk: cl { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; - m2_clk: m2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - rclk_clk: rclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(48 * 1024)>; - clock-mult = <1>; - }; - oscclk_clk: oscclk { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <(12 * 1024)>; - clock-mult = <1>; - }; - zb3_clk: zb3 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - }; - zb3d2_clk: zb3d2 { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - ddr_clk: ddr { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL3>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - }; - mp_clk: mp { - compatible = "fixed-factor-clock"; - clocks = <&pll1_div2_clk>; - #clock-cells = <0>; - clock-div = <15>; - clock-mult = <1>; - }; - cp_clk: cp { - compatible = "fixed-factor-clock"; - clocks = <&cpg_clocks R8A7794_CLK_PLL1>; - #clock-cells = <0>; - clock-div = <48>; - clock-mult = <1>; - }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - acp_clk: acp { - compatible = "fixed-factor-clock"; - clocks = <&extal_clk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; + /* + * The external audio clocks are configured as 0 Hz fixed + * frequency clocks by default. Boards that provide audio + * clocks should override them. + */ + audio_clka: audio_clka { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkb: audio_clkb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkc: audio_clkc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - /* Gate clocks */ - mstp0_clks: mstp0_clks@e6150130 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; - clocks = <&mp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "msiof0"; - }; - mstp1_clks: mstp1_clks@e6150134 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, - <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1 - R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0 - R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 - R8A7794_CLK_TMU0 R8A7794_CLK_VSP1_DU0 R8A7794_CLK_VSP1_S - >; - clock-output-names = - "vcp0", "vpc0", "tmu1", "3dg", "2ddmac", "fdp1-0", - "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du0", "vsps"; - }; - mstp2_clks: mstp2_clks@e6150138 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&zs_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 - R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 - R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 - R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0 - >; - clock-output-names = - "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2", - "sys-dmac1", "sys-dmac0"; - }; - mstp3_clks: mstp3_clks@e615013c { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0 - R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0 - R8A7794_CLK_IIC1 R8A7794_CLK_CMT1 - R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1 - >; - clock-output-names = - "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c6", "i2c7", - "cmt1", "usbdmac0", "usbdmac1"; - }; - mstp4_clks: mstp4_clks@e6150140 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&cp_clk>, <&zs_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "irqc", "intc-sys"; - }; - mstp5_clks: mstp5_clks@e6150144 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&hp_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "audmac0", "pwm"; - }; - mstp7_clks: mstp7_clks@e615014c { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&hp_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&zx_clk>, <&zx_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_EHCI R8A7794_CLK_HSUSB - R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 - R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 - R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 - R8A7794_CLK_SCIF0 - R8A7794_CLK_DU1 R8A7794_CLK_DU0 - >; - clock-output-names = - "ehci", "hsusb", - "hscif2", "scif5", "scif4", "hscif1", "hscif0", - "scif3", "scif2", "scif1", "scif0", - "du1", "du0"; - }; - mstp8_clks: mstp8_clks@e6150990 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 - R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER - >; - clock-output-names = - "vin1", "vin0", "etheravb", "ether"; - }; - mstp9_clks: mstp9_clks@e6150994 { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>, - <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = - "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", - "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", - "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; - }; - mstp10_clks: mstp10_clks@e6150998 { - compatible = "renesas,r8a7794-mstp-clocks", - "renesas,cpg-mstp-clocks"; - reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; - clocks = <&p_clk>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&p_clk>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>, - <&mstp10_clks R8A7794_CLK_SCU_ALL>; - #clock-cells = <1>; - clock-indices = ; - clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7", - "ssi6", "ssi5", "ssi4", "ssi3", - "ssi2", "ssi1", "ssi0", - "scu-all", "scu-dvc1", "scu-dvc0", - "scu-ctu1-mix1", "scu-ctu0-mix0", - "scu-src6", "scu-src5", "scu-src4", - "scu-src3", "scu-src2", "scu-src1"; - }; - mstp11_clks: mstp11_clks@e615099c { - compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; - reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; - clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; - #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 - >; - clock-output-names = "scifa3", "scifa4", "scifa5"; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7794-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; }; rst: reset-controller@e6160000 { @@ -1490,31 +1185,20 @@ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>, - <&mstp10_clks R8A7794_CLK_SSI9>, - <&mstp10_clks R8A7794_CLK_SSI8>, - <&mstp10_clks R8A7794_CLK_SSI7>, - <&mstp10_clks R8A7794_CLK_SSI6>, - <&mstp10_clks R8A7794_CLK_SSI5>, - <&mstp10_clks R8A7794_CLK_SSI4>, - <&mstp10_clks R8A7794_CLK_SSI3>, - <&mstp10_clks R8A7794_CLK_SSI2>, - <&mstp10_clks R8A7794_CLK_SSI1>, - <&mstp10_clks R8A7794_CLK_SSI0>, - <&mstp10_clks R8A7794_CLK_SCU_SRC6>, - <&mstp10_clks R8A7794_CLK_SCU_SRC5>, - <&mstp10_clks R8A7794_CLK_SCU_SRC4>, - <&mstp10_clks R8A7794_CLK_SCU_SRC3>, - <&mstp10_clks R8A7794_CLK_SCU_SRC2>, - <&mstp10_clks R8A7794_CLK_SCU_SRC1>, - <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>, - <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>, - <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>, - <&mstp10_clks R8A7794_CLK_SCU_DVC0>, - <&mstp10_clks R8A7794_CLK_SCU_DVC1>, + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, + <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clka>, <&audio_clkb>, <&audio_clkc>, - <&m2_clk>; + <&cpg CPG_CORE R8A7794_CLK_M2>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", @@ -1525,6 +1209,13 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index fdb1570bc7d3137fcfed7acf2fb970ca4ff1a75a..e2a0f576946f0884bb091d8a2ff6bc71e7b47949 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -135,6 +135,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 4916c65e0ace7ca0b9ec68cddaca34b55c39d932..3b704cfed69ac1f7b39343925fb2037c9e78e10b 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -152,6 +152,25 @@ }; }; + gpu: gpu@10090000 { + compatible = "rockchip,rk3036-mali", "arm,mali-400"; + reg = <0x10090000 0x10000>; + interrupts = , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0"; + assigned-clocks = <&cru SCLK_GPU>; + assigned-clock-rates = <100000000>; + clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; + clock-names = "core", "bus"; + resets = <&cru SRST_GPU>; + status = "disabled"; + }; + vop: vop@10118000 { compatible = "rockchip,rk3036-vop"; reg = <0x10118000 0x19c>; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 400cbf9609e3707b7792139bba326c947df81fe8..cdf301f5778b129f0d2007c8cfa5cd0f13b93d61 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -196,7 +196,7 @@ clock-frequency = <400000>; status = "okay"; - ak8963: ak8963@0d { + ak8963: ak8963@d { compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio4>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index f50481fd8e5cdc5de9e05a035fb75d2b2bd8bbaf..06523caca27d6d09058fbe3b6983266fbae3858c 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -610,6 +610,30 @@ }; }; +&gpu { + compatible = "rockchip,rk3066-mali", "arm,mali-400"; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_xfer>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 53d6fc2fdbce89fb2118c30e2115c05bc29eebcd..00e05a6662acd5bb19c42540fd0d22c857fdf4af 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -176,6 +176,10 @@ cpu0-supply = <&vdd_arm>; }; +&gpu { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 1399bc04ea77fe17fd10472c0ba37ba7d80c8a1a..aa10caae51c3021f4cef19ade6bd3ca517e3c24f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -553,6 +553,30 @@ interrupts = ; }; +&gpu { + compatible = "rockchip,rk3188-mali", "arm,mali-400"; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; +}; + &i2c0 { compatible = "rockchip,rk3188-i2c"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 06814421eed2ef9c41fd5db803bc60f91ee85bed..780ec3a99b21f857b414d4d47b8e773cd28c7788 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -558,6 +558,27 @@ status = "disabled"; }; + gpu: gpu@20000000 { + compatible = "rockchip,rk3228-mali", "arm,mali-400"; + reg = <0x20000000 0x10000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "core", "bus"; + resets = <&cru SRST_GPU_A>; + status = "disabled"; + }; + vpu_mmu: iommu@20020800 { compatible = "rockchip,iommu"; reg = <0x20020800 0x100>; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 5f05815f47e09278bdc9eb7870d25ab0c504e549..5f1e336dbaac7a85c300c1a5f395a7d4cd127953 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -184,6 +184,7 @@ regulator-name = "vdd10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-always-on; }; vcca_18: REG7 { @@ -223,6 +224,7 @@ regulator-name = "vcc18_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 7da0947ababbc4a1cda11e6f5b4190ee9f803a88..eab176e3dfc3011149ecefc91745a4ee3a20e89f 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -226,6 +226,13 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; + status = "okay"; +}; + &i2c0 { hym8563: hym8563@51 { compatible = "haoyu,hym8563"; @@ -255,6 +262,10 @@ }; }; +&i2c5 { + status = "okay"; +}; + &i2s { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index f084e0c8dcb350726949d698cd8021c0168d8a9e..c06d0f4ceb8153811752a2d31e0e85779288ec5d 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -384,7 +384,7 @@ status = "okay"; clock-frequency = <400000>; - ak8963: ak8963@0d { + ak8963: ak8963@d { compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio8>; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts new file mode 100644 index 0000000000000000000000000000000000000000..9842a006e8238b352672968f21b155f543130f69 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -0,0 +1,498 @@ +/* + * Copyright (C) 2017 Jagan Teki + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288.dtsi" + +/ { + model = "Amarula Vyasa-RK3288"; + compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; + + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x0 0x0 0x0 0x80000000>; + device_type = "memory"; + }; + + dc12_vbat: dc12-vbat { + compatible = "regulator-fixed"; + regulator-name = "dc12_vbat"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vboot_3v3: vboot-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vboot_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vboot_5v: vboot-5v { + compatible = "regulator-fixed"; + regulator-name = "vboot_sv"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + v3g_3v3: v3g-3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3g_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc12_vbat>; + }; + + vsus_5v: vsus-5v { + compatible = "regulator-fixed"; + regulator-name = "vsus_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vusb1_5v: vusb1-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb1_5v"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */ + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + + vusb2_5v: vusb2-5v { + compatible = "regulator-fixed"; + regulator-name = "vusb2_5v"; + enable-active-high; + gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_tp: LDO_REG1 { + regulator-name = "vcc_tp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_codec: LDO_REG2 { + regulator-name = "vcc_codec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_gps: LDO_REG4 { + regulator-name = "vcc_gps"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc10_lcd: LDO_REG6 { + regulator-name = "vcc10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_lan: SWITCH_REG2 { + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + audio-supply = <&vcc_18>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_io>; + flash0-suuply = <&vcc_18>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&phy_pwr_en>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = ; + }; + }; + + usb_host { + phy_pwr_en: phy-pwr-en { + rockchip,pins = ; + }; + + usb2_pwr_en: usb2-pwr-en { + rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = ; + + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 356ed1e624525224c8e797da0990f83a75823008..cd24894ee5c6b14deab21c543bad7c62ec34c93d 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -972,6 +972,17 @@ status = "disabled"; }; + rga: rga@ff920000 { + compatible = "rockchip,rk3288-rga"; + reg = <0x0 0xff920000 0x0 0x180>; + interrupts = ; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; + clock-names = "aclk", "hclk", "sclk"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>; + reset-names = "core", "axi", "ahb"; + }; + vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0x0 0xff930000 0x0 0x19c>; @@ -1002,6 +1013,11 @@ reg = <2>; remote-endpoint = <&mipi_in_vopb>; }; + + vopb_out_lvds: endpoint@3 { + reg = <3>; + remote-endpoint = <&lvds_in_vopb>; + }; }; }; @@ -1045,6 +1061,11 @@ reg = <2>; remote-endpoint = <&mipi_in_vopl>; }; + + vopl_out_lvds: endpoint@3 { + reg = <3>; + remote-endpoint = <&lvds_in_vopl>; + }; }; }; @@ -1086,6 +1107,39 @@ }; }; + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + reg = <0x0 0xff96c000 0x0 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + power-domains = <&power RK3288_PD_VIO>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + }; + }; + edp: dp@ff970000 { compatible = "rockchip,rk3288-dp"; reg = <0x0 0xff970000 0x0 0x4000>; @@ -1124,8 +1178,8 @@ reg-io-width = <4>; rockchip,grf = <&grf>; interrupts = ; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "cec"; power-domains = <&power RK3288_PD_VIO>; status = "disabled"; @@ -1427,6 +1481,14 @@ }; hdmi { + hdmi_cec_c0: hdmi-cec-c0 { + rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; + }; + + hdmi_cec_c7: hdmi-cec-c7 { + rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>; + }; + hdmi_ddc: hdmi-ddc { rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, <7 20 RK_FUNC_2 &pcfg_pull_none>; @@ -1527,6 +1589,15 @@ }; }; + lcdc { + lcdc_ctl: lcdc-ctl { + rockchip,pins = <1 24 RK_FUNC_1 &pcfg_pull_none>, + <1 25 RK_FUNC_1 &pcfg_pull_none>, + <1 26 RK_FUNC_1 &pcfg_pull_none>, + <1 27 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_clk: sdmmc-clk { rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 4aa6f60d6a22eddf372c34cc18769347e65fa48c..49584b6a4195281916d1bec1b02bfa15fa91d012 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -117,6 +117,17 @@ clock-output-names = "xin24m"; }; + gpu: gpu@10090000 { + compatible = "arm,mali-400"; + reg = <0x10090000 0x10000>; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "core", "bus"; + assigned-clocks = <&cru ACLK_GPU>; + assigned-clock-rates = <100000000>; + resets = <&cru SRST_GPU>; + status = "disabled"; + }; + L2: l2-cache-controller@10138000 { compatible = "arm,pl310-cache"; reg = <0x10138000 0x1000>; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 86a57f823616185a14ede94aebdcf853e6edfa16..70f0106d1252b26b7062d354758c9e2468ee16e3 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -222,6 +222,10 @@ status = "okay"; }; +&tsadc { + status = "okay"; +}; + &u2phy { status = "okay"; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index e7cd1315db1b7bc08c688867dd77c4687396fe92..76ea24636feb12026e0708c6c256cf0465722787 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -43,6 +43,7 @@ #include #include #include +#include / { #address-cells = <1>; #size-cells = <1>; @@ -70,6 +71,8 @@ compatible = "arm,cortex-a7"; reg = <0xf00>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <75>; operating-points-v2 = <&cpu_opp_table>; }; }; @@ -329,6 +332,60 @@ status = "disabled"; }; + thermal-zones { + soc_thermal: soc-thermal { + polling-delay-passive = <20>; + polling-delay = <1000>; + sustainable-power = <50>; + thermal-sensors = <&tsadc 0>; + + trips { + threshold: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + target: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + soc_crit: soc-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + }; + }; + }; + + tsadc: tsadc@10370000 { + compatible = "rockchip,rv1108-tsadc"; + reg = <0x10370000 0x100>; + interrupts = ; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <750000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,hw-tshut-temp = <120000>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + adc: adc@1038c000 { compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc"; reg = <0x1038c000 0x100>; @@ -740,6 +797,16 @@ }; }; + tsadc { + otp_out: otp-out { + rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>; + }; + + otp_gpio: otp-gpio { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index b1a26b42d1904a82817e1986da79fd963b934d2f..b44e63995583dfaa56a223c359f32aab2ad9c329 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -124,7 +124,7 @@ }; }; - ns_sram: sram@00200000 { + ns_sram: sram@200000 { compatible = "mmio-sram"; reg = <0x00200000 0x20000>; }; @@ -135,13 +135,13 @@ #size-cells = <1>; ranges; - nfc_sram: sram@00100000 { + nfc_sram: sram@100000 { compatible = "mmio-sram"; no-memory-wc; reg = <0x00100000 0x2400>; }; - usb0: gadget@00300000 { + usb0: gadget@300000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,sama5d3-udc"; @@ -271,7 +271,7 @@ }; }; - usb1: ohci@00400000 { + usb1: ohci@400000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -280,7 +280,7 @@ status = "disabled"; }; - usb2: ehci@00500000 { + usb2: ehci@500000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -289,7 +289,7 @@ status = "disabled"; }; - L2: cache-controller@00a00000 { + L2: cache-controller@a00000 { compatible = "arm,pl310-cache"; reg = <0x00a00000 0x1000>; interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 554d0bdedc7a172c9bad3b8e84ac068cb388a412..1889b4dea066886ae83b0d97cf98981dd6544510 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -79,7 +79,7 @@ }; }; - sram: sram@00300000 { + sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; }; @@ -1408,7 +1408,7 @@ reg = <0x200000 0x2400>; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,sama5d3-udc"; @@ -1525,7 +1525,7 @@ }; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1534,7 +1534,7 @@ status = "disabled"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 6d252ad050f671809c1e313bbb0771e7f5836a57..7f55050dd4057b6de1da1cc1053534d392c2cf47 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -166,14 +166,14 @@ }; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; - usb1: ohci@00600000 { + usb1: ohci@600000 { num-ports = <3>; atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH &pioD 26 GPIO_ACTIVE_LOW @@ -182,7 +182,7 @@ status = "okay"; }; - usb2: ehci@00700000 { + usb2: ehci@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index 252e0d35f8466929618dcd28227f00075684600d..83e3d3e08fd44ae11d212feb091dd51701567c9a 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -253,7 +253,7 @@ }; }; - usb0: gadget@00500000 { + usb0: gadget@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 2fa36c525957cc193000f2db84ef50d07aa1ca85..b069644ed23886889f9a0430f2fc6a3cae88af49 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -113,7 +113,7 @@ }; }; - ns_sram: sram@00210000 { + ns_sram: sram@210000 { compatible = "mmio-sram"; reg = <0x00210000 0x10000>; }; @@ -130,7 +130,7 @@ reg = <0x100000 0x2400>; }; - usb0: gadget@00400000 { + usb0: gadget@400000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,sama5d3-udc"; @@ -260,7 +260,7 @@ }; }; - usb1: ohci@00500000 { + usb1: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -269,7 +269,7 @@ status = "disabled"; }; - usb2: ehci@00600000 { + usb2: ehci@600000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -278,7 +278,7 @@ status = "disabled"; }; - L2: cache-controller@00a00000 { + L2: cache-controller@a00000 { compatible = "arm,pl310-cache"; reg = <0x00a00000 0x1000>; interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 4ea5c5a16c57eed5235fc0f7365ce1a9d5e005f5..88d7e5631d340740d2642b5b0e8770ea89cc895b 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -27,6 +27,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1196000000>; + clocks = <&cpg_clocks SH73A0_CLK_Z>; power-domains = <&pd_a2sl>; next-level-cache = <&L2>; }; @@ -35,6 +36,7 @@ compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1196000000>; + clocks = <&cpg_clocks SH73A0_CLK_Z>; power-domains = <&pd_a2sl>; next-level-cache = <&L2>; }; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 6f720756057d62eec2e24dc7fc453aafa9edfc59..35e944d8b5c42307c8dbb9f98d34b35a7457cc46 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -92,7 +92,7 @@ interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; }; - ak8974@0f { + ak8974@f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; reg = <0x0f>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 3c9f2f068c2f2387ea4b8927782f87eb72f9ba67..0e7d77d719d759955a3de5a5231d3fab16c19c0f 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -143,7 +143,7 @@ interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; }; - ak8974@0f { + ak8974@f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; reg = <0x0f>; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index 34c119a66f14b44a2878bbbb9eb21fba7ea87fb6..d0a24d9e517a5e8ba5403b1fd2fbd39bff622813 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -90,7 +90,7 @@ clock-output-names = "clk-s-icn-reg-0"; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -131,7 +131,7 @@ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -220,7 +220,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 12c0757594d7fc305a1aea564419e69bf508c0da..cf3756976c396b74079ebcb2c3fdda8769793cdf 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -72,19 +72,19 @@ }; }; - intc: interrupt-controller@08761000 { + intc: interrupt-controller@8761000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x08761000 0x1000>, <0x08760100 0x100>; }; - scu@08760000 { + scu@8760000 { compatible = "arm,cortex-a9-scu"; reg = <0x08760000 0x1000>; }; - timer@08760200 { + timer@8760200 { interrupt-parent = <&intc>; compatible = "arm,cortex-a9-global-timer"; reg = <0x08760200 0x100>; @@ -555,7 +555,7 @@ status = "disabled"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; @@ -570,7 +570,7 @@ bus-width = <8>; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; status = "disabled"; reg = <0x09080000 0x7ff>; @@ -715,14 +715,14 @@ status = "disabled"; }; - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; @@ -756,14 +756,14 @@ <&clk_s_c0_flexgen CLK_ETH_PHY>; }; - rng10: rng@08a89000 { + rng10: rng@8a89000 { compatible = "st,rng"; reg = <0x08a89000 0x1000>; clocks = <&clk_sysin>; status = "okay"; }; - rng11: rng@08a8a000 { + rng11: rng@8a8a000 { compatible = "st,rng"; reg = <0x08a8a000 0x1000>; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index bd1a82e8fffee706d8f8030bb01c209fe23b8521..a29090077fdf5637e7a173c70288e6fbbfc02228 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -56,7 +56,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -64,7 +64,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO0"; }; - pio1: gpio@09611000 { + pio1: gpio@9611000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -72,7 +72,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO1"; }; - pio2: gpio@09612000 { + pio2: gpio@9612000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -80,7 +80,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO2"; }; - pio3: gpio@09613000 { + pio3: gpio@9613000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -88,7 +88,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO3"; }; - pio4: gpio@09614000 { + pio4: gpio@9614000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -97,7 +97,7 @@ st,bank-name = "PIO4"; }; - pio5: gpio@09615000 { + pio5: gpio@9615000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -380,7 +380,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; - pio10: pio@09200000 { + pio10: pio@9200000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -388,7 +388,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO10"; }; - pio11: pio@09201000 { + pio11: pio@9201000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -396,7 +396,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO11"; }; - pio12: pio@09202000 { + pio12: pio@9202000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -404,7 +404,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO12"; }; - pio13: pio@09203000 { + pio13: pio@9203000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -412,7 +412,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO13"; }; - pio14: pio@09204000 { + pio14: pio@9204000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -420,7 +420,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO14"; }; - pio15: pio@09205000 { + pio15: pio@9205000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -428,7 +428,7 @@ reg = <0x5000 0x100>; st,bank-name = "PIO15"; }; - pio16: pio@09206000 { + pio16: pio@9206000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -436,7 +436,7 @@ reg = <0x6000 0x100>; st,bank-name = "PIO16"; }; - pio17: pio@09207000 { + pio17: pio@9207000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -444,7 +444,7 @@ reg = <0x7000 0x100>; st,bank-name = "PIO17"; }; - pio18: pio@09208000 { + pio18: pio@9208000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -452,7 +452,7 @@ reg = <0x8000 0x100>; st,bank-name = "PIO18"; }; - pio19: pio@09209000 { + pio19: pio@9209000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -940,7 +940,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; - pio20: pio@09210000 { + pio20: pio@9210000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -973,7 +973,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; - pio30: gpio@09220000 { + pio30: gpio@9220000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -981,7 +981,7 @@ reg = <0x0 0x100>; st,bank-name = "PIO30"; }; - pio31: gpio@09221000 { + pio31: gpio@9221000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -989,7 +989,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO31"; }; - pio32: gpio@09222000 { + pio32: gpio@9222000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -997,7 +997,7 @@ reg = <0x2000 0x100>; st,bank-name = "PIO32"; }; - pio33: gpio@09223000 { + pio33: gpio@9223000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1005,7 +1005,7 @@ reg = <0x3000 0x100>; st,bank-name = "PIO33"; }; - pio34: gpio@09224000 { + pio34: gpio@9224000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1013,7 +1013,7 @@ reg = <0x4000 0x100>; st,bank-name = "PIO34"; }; - pio35: gpio@09225000 { + pio35: gpio@9225000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1168,7 +1168,7 @@ interrupt-names = "irqmux"; ranges = <0 0x09230000 0x3000>; - pio40: gpio@09230000 { + pio40: gpio@9230000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1176,7 +1176,7 @@ reg = <0 0x100>; st,bank-name = "PIO40"; }; - pio41: gpio@09231000 { + pio41: gpio@9231000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1184,7 +1184,7 @@ reg = <0x1000 0x100>; st,bank-name = "PIO41"; }; - pio42: gpio@09232000 { + pio42: gpio@9232000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 83313b51915dd45c4a136f7ba1590387ace7e78b..9830be57743368b651a5b1d18f8c66dbfe6dcce1 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -30,7 +30,7 @@ soc { - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { max-frequency = <200000000>; sd-uhs-sdr50; sd-uhs-sdr104; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 93c14d183e291b14cb0b094dd2a0b57762a2d08f..c663b70c43a7426ffa09667c4fbb30e657ca5a13 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -109,14 +109,14 @@ status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { pinctrl-0 = <&pinctrl_sd0>; bus-width = <4>; status = "okay"; }; /* high speed expansion connector */ - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index 07c8ef9d77f6e790a82e37cbde7ebf1dcd8ef5dc..fde5df17f57590e1a9c6f8dc4a8ab200ea7cba91 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -92,7 +92,7 @@ clock-output-names = "clk-s-icn-reg-0"; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -134,7 +134,7 @@ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -230,7 +230,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 21fe72b183d87c6f470b0ebce2aedcb1881c9a1a..cffa50db5d7240e358e52df23c2a929af428ecf3 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -282,7 +282,7 @@ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; }; - sti-cec@094a087c { + sti-cec@94a087c { compatible = "st,stih-cec"; reg = <0x94a087c 0x64>; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 438e54c585b1c1291a6cfc362362b06d1460dc66..4e6d915c85ff0aef06739e910f0fa9d0ba040497 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -75,11 +75,11 @@ st,i2c-min-sda-pulse-width-us = <5>; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { status = "okay"; max-frequency = <200000000>; sd-uhs-sdr50; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index ee6614b79f7dbed88566e64f6458e0ff534949b2..9a157c1a99b1d12ad2e326a2cac01566cd124940 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -92,7 +92,7 @@ clock-output-names = "clk-s-icn-reg-0"; }; - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; @@ -131,7 +131,7 @@ "clk-s-c0-fs0-ch3"; }; - clk_s_c0: clockgen-c@09103000 { + clk_s_c0: clockgen-c@9103000 { compatible = "st,clkgen-c32"; reg = <0x9103000 0x1000>; @@ -223,7 +223,7 @@ "clk-s-d0-fs0-ch3"; }; - clockgen-d0@09104000 { + clockgen-d0@9104000 { compatible = "st,clkgen-c32"; reg = <0x9104000 0x1000>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 965f88160718ebe5b224f48acaf55175151a7e91..e6525ab4d9bb6d9c6ae87513e861b3846b3109eb 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -100,7 +100,7 @@ phy-names = "usb"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>; assigned-clock-parents = <&clk_s_c0_pll1 0>; assigned-clock-rates = <200000000>; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 4b8f62f89664034420275e729e0a2f5471ea510f..7f80c2c414c89da5f9f16fb5c6b0b0a0f8c0280d 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -62,12 +62,12 @@ status = "okay"; }; - mmc0: sdhci@09060000 { + mmc0: sdhci@9060000 { non-removable; status = "okay"; }; - mmc1: sdhci@09080000 { + mmc1: sdhci@9080000 { status = "okay"; }; @@ -102,7 +102,7 @@ fixed-link = <0 1 1000 0 0>; }; - demux@08a20000 { + demux@8a20000 { compatible = "st,stih407-c8sectpfe"; status = "okay"; reg = <0x08a20000 0x10000>, diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 69a957963fa8c96d1586bdd2a8d7df2732d42904..2d4e7171769454f4405774aad212ce1fe6c6f160 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -83,6 +83,13 @@ gpios = <&gpioc 13 0>; }; }; + + usbotg_hs_phy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; + clock-names = "main_clk"; + }; }; &clk_hse { @@ -93,6 +100,14 @@ status = "okay"; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-names = "default"; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + &rtc { status = "okay"; }; @@ -102,3 +117,12 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 7f3560c0211dd8972f06a89e34d54c5c00d9fbfa..ae94d86c53c490d41267936cd36b3ef7f3fdd140 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -40,7 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include +#include #include / { @@ -165,35 +165,35 @@ usart1_pins_a: usart1@0 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ bias-disable; }; }; usart3_pins_a: usart3@0 { pins1 { - pinmux = ; + pinmux = ; /* USART3_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART3_RX */ bias-disable; }; }; usbotg_fs_pins_a: usbotg_fs@0 { pins { - pinmux = , - , - ; + pinmux = , /* OTG_FS_ID */ + , /* OTG_FS_DM */ + ; /* OTG_FS_DP */ bias-disable; drive-push-pull; slew-rate = <2>; @@ -202,9 +202,9 @@ usbotg_fs_pins_b: usbotg_fs@1 { pins { - pinmux = , - , - ; + pinmux = , /* OTG_HS_ID */ + , /* OTG_HS_DM */ + ; /* OTG_HS_DP */ bias-disable; drive-push-pull; slew-rate = <2>; @@ -213,18 +213,18 @@ usbotg_hs_pins_a: usbotg_hs@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* OTG_HS_ULPI_NXT*/ + , /* OTG_HS_ULPI_DIR */ + , /* OTG_HS_ULPI_STP */ + , /* OTG_HS_ULPI_CK */ + , /* OTG_HS_ULPI_D0 */ + , /* OTG_HS_ULPI_D1 */ + , /* OTG_HS_ULPI_D2 */ + , /* OTG_HS_ULPI_D3 */ + , /* OTG_HS_ULPI_D4 */ + , /* OTG_HS_ULPI_D5 */ + , /* OTG_HS_ULPI_D6 */ + ; /* OTG_HS_ULPI_D7 */ bias-disable; drive-push-pull; slew-rate = <2>; @@ -233,49 +233,49 @@ ethernet_mii: mii@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* ETH_MII_TXD0_ETH_RMII_TXD0 */ + , /* ETH_MII_TXD1_ETH_RMII_TXD1 */ + , /* ETH_MII_TXD2 */ + , /* ETH_MII_TXD3 */ + , /* ETH_MII_TX_CLK */ + , /* ETH_MII_TX_EN_ETH_RMII_TX_EN */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */ + , /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */ + , /* ETH_MII_RXD0_ETH_RMII_RXD0 */ + , /* ETH_MII_RXD1_ETH_RMII_RXD1 */ + , /* ETH_MII_RXD2 */ + ; /* ETH_MII_RXD3 */ slew-rate = <2>; }; }; adc3_in8_pin: adc@200 { pins { - pinmux = ; + pinmux = ; }; }; pwm1_pins: pwm@1 { pins { - pinmux = , - , - ; + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH1N */ + ; /* TIM1_BKIN */ }; }; pwm3_pins: pwm@3 { pins { - pinmux = , - ; + pinmux = , /* TIM3_CH1 */ + ; /* TIM3_CH2 */ }; }; i2c1_pins: i2c1@0 { pins { - pinmux = , - ; + pinmux = , /* I2C1_SDA */ + ; /* I2C1_SCL */ bias-disable; drive-open-drain; slew-rate = <3>; @@ -284,55 +284,55 @@ ltdc_pins: ltdc@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_CLK */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6*/ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3*/ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + , /* LCD_B7 */ + ; /* LCD_DE */ slew-rate = <2>; }; }; dcmi_pins: dcmi@0 { pins { - pinmux = , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; + pinmux = , /* DCMI_HSYNC */ + , /* DCMI_VSYNC */ + , /* DCMI_PIXCLK */ + , /* DCMI_D0 */ + , /* DCMI_D1 */ + , /* DCMI_D2 */ + , /* DCMI_D3 */ + , /*DCMI_D4 */ + , /* DCMI_D5 */ + , /* DCMI_D6 */ + , /* DCMI_D7 */ + , /* DCMI_D8 */ + , /* DCMI_D9 */ + , /* DCMI_D10 */ + ; /* DCMI_D11 */ bias-disable; drive-push-pull; slew-rate = <3>; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 5b36eb114ddc953067904afbd08497b2286c3785..10099df8b73ef39621685efe017dfd08958ca4d1 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -314,7 +314,7 @@ }; usart2: serial@40004400 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>; @@ -322,7 +322,7 @@ }; usart3: serial@40004800 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40004800 0x400>; interrupts = <39>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>; @@ -386,7 +386,7 @@ }; usart7: serial@40007800 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40007800 0x400>; interrupts = <82>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>; @@ -394,7 +394,7 @@ }; usart8: serial@40007c00 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>; @@ -444,7 +444,7 @@ }; usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>; @@ -455,7 +455,7 @@ }; usart6: serial@40011400 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011400 0x400>; interrupts = <71>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index 18f6560744379123f770a5f4a6a5733e4f10f87c..4d85dba59e1deadea023c5af85cd23b5e1823f34 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -61,6 +61,20 @@ serial0 = &usart1; }; + usbotg_hs_phy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; + clock-names = "main_clk"; + }; + + /* This turns on vbus for otg fs for host mode (dwc2) */ + vcc5v_otg_fs: vcc5v-otg-fs-regulator { + compatible = "regulator-fixed"; + gpio = <&gpiod 5 0>; + regulator-name = "vcc5_host1"; + regulator-always-on; + }; }; &clk_hse { @@ -72,3 +86,19 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_fs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_fs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_b>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 5633860037d23397379b092a4cf5bba353abb367..5f66d151eedb15fa5481323a17bae4f23c1d404c 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -42,7 +42,7 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" -#include +#include #include #include @@ -82,6 +82,27 @@ status = "disabled"; }; + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + timer3: timer@40000400 { compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; @@ -90,6 +111,27 @@ status = "disabled"; }; + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + timer4: timer@40000800 { compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; @@ -98,6 +140,27 @@ status = "disabled"; }; + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; @@ -105,6 +168,27 @@ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; }; + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; @@ -113,6 +197,22 @@ status = "disabled"; }; + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + timer7: timer@40001400 { compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; @@ -121,6 +221,73 @@ status = "disabled"; }; + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + rtc: rtc@40002800 { compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; @@ -136,7 +303,7 @@ }; usart2: serial@40004400 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; interrupts = <38>; clocks = <&rcc 1 CLK_USART2>; @@ -144,7 +311,7 @@ }; usart3: serial@40004800 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40004800 0x400>; interrupts = <39>; clocks = <&rcc 1 CLK_USART3>; @@ -167,6 +334,18 @@ status = "disabled"; }; + i2c1: i2c@40005400 { + compatible = "st,stm32f7-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F7_APB1_RESET(I2C1)>; + clocks = <&rcc 1 CLK_I2C1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cec: cec@40006c00 { compatible = "st,stm32-cec"; reg = <0x40006C00 0x400>; @@ -177,7 +356,7 @@ }; usart7: serial@40007800 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40007800 0x400>; interrupts = <82>; clocks = <&rcc 1 CLK_UART7>; @@ -185,15 +364,57 @@ }; usart8: serial@40007c00 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; clocks = <&rcc 1 CLK_UART8>; status = "disabled"; }; + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart1: serial@40011000 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&rcc 1 CLK_USART1>; @@ -201,7 +422,7 @@ }; usart6: serial@40011400 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40011400 0x400>; interrupts = <71>; clocks = <&rcc 1 CLK_USART6>; @@ -221,6 +442,57 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; @@ -347,7 +619,7 @@ cec_pins_a: cec@0 { pins { - pinmux = ; + pinmux = ; /* HDMI CEC */ slew-rate = <0>; drive-open-drain; bias-disable; @@ -356,27 +628,88 @@ usart1_pins_a: usart1@0 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ bias-disable; }; }; usart1_pins_b: usart1@1 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ + bias-disable; + }; + }; + + i2c1_pins_b: i2c1@0 { + pins { + pinmux = , /* I2C1 SDA */ + ; /* I2C1 SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + usbotg_hs_pins_a: usbotg-hs@0 { + pins { + pinmux = , /* OTG_HS_ULPI_NXT */ + , /* OTG_HS_ULPI_DIR */ + , /* OTG_HS_ULPI_STP */ + , /* OTG_HS_ULPI_CK */ + , /* OTG_HS_ULPI_D0 */ + , /* OTG_HS_ULPI_D1 */ + , /* OTG_HS_ULPI_D2 */ + , /* OTG_HS_ULPI_D3 */ + , /* OTG_HS_ULPI_D4 */ + , /* OTG_HS_ULPI_D5 */ + , /* OTG_HS_ULPI_D6 */ + ; /* OTG_HS_ULPI_D7 */ bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_hs_pins_b: usbotg-hs@1 { + pins { + pinmux = , /* OTG_HS_ULPI_NXT */ + , /* OTG_HS_ULPI_DIR */ + , /* OTG_HS_ULPI_STP */ + , /* OTG_HS_ULPI_CK */ + , /* OTG_HS_ULPI_D0 */ + , /* OTG_HS_ULPI_D1 */ + , /* OTG_HS_ULPI_D2 */ + , /* OTG_HS_ULPI_D3 */ + , /* OTG_HS_ULPI_D4 */ + , /* OTG_HS_ULPI_D5 */ + , /* OTG_HS_ULPI_D6 */ + ; /* OTG_HS_ULPI_D7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_fs_pins_a: usbotg-fs@0 { + pins { + pinmux = , /* OTG_FS_ID */ + , /* OTG_FS_DM */ + ; /* OTG_FS_DP */ + bias-disable; + drive-push-pull; + slew-rate = <2>; }; }; }; @@ -431,6 +764,24 @@ st,mem2mem; status = "disabled"; }; + + usbotg_hs: usb@40040000 { + compatible = "st,stm32f7-hsotg"; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>; + clock-names = "otg"; + status = "disabled"; + }; + + usbotg_fs: usb@50000000 { + compatible = "st,stm32f4x9-fsotg"; + reg = <0x50000000 0x40000>; + interrupts = <67>; + clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>; + clock-names = "otg"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 76bbd6575fae6fdabdf1806ee91601486218376d..65c1cd0439872a612fad7a7af7017dc3064a54da 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -40,7 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include +#include / { soc { @@ -55,7 +55,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x0 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOA_CK>; st,bank-name = "GPIOA"; }; @@ -63,7 +63,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOB_CK>; st,bank-name = "GPIOB"; }; @@ -71,7 +71,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x800 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOC_CK>; st,bank-name = "GPIOC"; }; @@ -79,7 +79,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0xc00 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOD_CK>; st,bank-name = "GPIOD"; }; @@ -87,7 +87,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1000 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOE_CK>; st,bank-name = "GPIOE"; }; @@ -95,7 +95,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOF_CK>; st,bank-name = "GPIOF"; }; @@ -103,7 +103,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1800 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOG_CK>; st,bank-name = "GPIOG"; }; @@ -111,7 +111,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1c00 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOH_CK>; st,bank-name = "GPIOH"; }; @@ -119,7 +119,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2000 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOI_CK>; st,bank-name = "GPIOI"; }; @@ -127,7 +127,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOJ_CK>; st,bank-name = "GPIOJ"; }; @@ -135,32 +135,32 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2800 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc GPIOK_CK>; st,bank-name = "GPIOK"; }; usart1_pins: usart1@0 { pins1 { - pinmux = ; + pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART1_RX */ bias-disable; }; }; usart2_pins: usart2@0 { pins1 { - pinmux = ; + pinmux = ; /* USART2_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; /* USART2_RX */ bias-disable; }; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 58ec2275181ef7c196087ba8ba2ac6d05da6524a..bbfcbaca0b36bc30e44b63dd5bc9c7b9ef872f91 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -42,6 +42,8 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" +#include +#include / { clocks { @@ -51,10 +53,16 @@ clock-frequency = <0>; }; - timer_clk: timer-clk { + clk_lse: clk-lse { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <125000000>; + clock-frequency = <32768>; + }; + + clk_i2s: i2s_ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; }; }; @@ -63,21 +71,47 @@ compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&timer_clk>; + clocks = <&rcc TIM5_CK>; + }; + + lptimer1: timer@40002400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x40002400 0x400>; + clocks = <&rcc LPTIM1_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; }; usart2: serial@40004400 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; interrupts = <38>; status = "disabled"; - clocks = <&timer_clk>; + clocks = <&rcc USART2_CK>; }; dac: dac@40007400 { compatible = "st,stm32h7-dac-core"; reg = <0x40007400 0x400>; - clocks = <&timer_clk>; + clocks = <&rcc DAC12_CK>; clock-names = "pclk"; #address-cells = <1>; #size-cells = <0>; @@ -99,12 +133,11 @@ }; usart1: serial@40011000 { - compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + compatible = "st,stm32f7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; status = "disabled"; - clocks = <&timer_clk>; - + clocks = <&rcc USART1_CK>; }; dma1: dma@40020000 { @@ -118,9 +151,10 @@ <16>, <17>, <47>; - clocks = <&timer_clk>; + clocks = <&rcc DMA1_CK>; #dma-cells = <4>; st,mem2mem; + dma-requests = <8>; status = "disabled"; }; @@ -135,17 +169,28 @@ <68>, <69>, <70>; - clocks = <&timer_clk>; + clocks = <&rcc DMA2_CK>; #dma-cells = <4>; st,mem2mem; + dma-requests = <8>; status = "disabled"; }; + dmamux1: dma-router@40020800 { + compatible = "st,stm32h7-dmamux"; + reg = <0x40020800 0x1c>; + #dma-cells = <3>; + dma-channels = <16>; + dma-requests = <128>; + dma-masters = <&dma1 &dma2>; + clocks = <&rcc DMA1_CK>; + }; + adc_12: adc@40022000 { compatible = "st,stm32h7-adc-core"; reg = <0x40022000 0x400>; interrupts = <18>; - clocks = <&timer_clk>; + clocks = <&rcc ADC12_CK>; clock-names = "bus"; interrupt-controller; #interrupt-cells = <1>; @@ -172,11 +217,121 @@ }; }; + mdma1: dma@52000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x52000000 0x1000>; + interrupts = <122>; + clocks = <&rcc MDMA_CK>; + #dma-cells = <5>; + dma-channels = <16>; + dma-requests = <32>; + }; + + lptimer2: timer@58002400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58002400 0x400>; + clocks = <&rcc LPTIM2_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + + trigger@1 { + compatible = "st,stm32-lptimer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + + lptimer3: timer@58002800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58002800 0x400>; + clocks = <&rcc LPTIM3_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + + trigger@2 { + compatible = "st,stm32-lptimer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + lptimer4: timer@58002c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58002c00 0x400>; + clocks = <&rcc LPTIM4_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + }; + + lptimer5: timer@58003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x58003000 0x400>; + clocks = <&rcc LPTIM5_CK>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + status = "disabled"; + }; + }; + + vrefbuf: regulator@58003C00 { + compatible = "st,stm32-vrefbuf"; + reg = <0x58003C00 0x8>; + clocks = <&rcc VREF_CK>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + status = "disabled"; + }; + + rcc: reset-clock-controller@58024400 { + compatible = "st,stm32h743-rcc", "st,stm32-rcc"; + reg = <0x58024400 0x400>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>; + st,syscfg = <&pwrcfg>; + }; + + pwrcfg: power-config@58024800 { + compatible = "syscon"; + reg = <0x58024800 0x400>; + }; + adc_3: adc@58026000 { compatible = "st,stm32h7-adc-core"; reg = <0x58026000 0x400>; interrupts = <127>; - clocks = <&timer_clk>; + clocks = <&rcc ADC3_CK>; clock-names = "bus"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 6c07786e7ddb9195fc88108d5d1906deb13f6c12..9f0e72c67219adba7a2f9d47ed69d596539420ac 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -81,7 +81,7 @@ }; &clk_hse { - clock-frequency = <125000000>; + clock-frequency = <25000000>; }; &usart1 { diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index f80d37ddc4c6638e2d0f94da05af1ac9afa91ddc..09e909576c61f726aad93e3f4ddc9923b87b628f 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_a1000>; red { label = "a1000:red:usr"; @@ -79,8 +77,6 @@ reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&emac_power_pin_a1000>; regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -129,8 +125,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -140,8 +134,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -156,7 +148,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -170,8 +162,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -187,18 +177,6 @@ status = "okay"; }; -&pio { - emac_power_pin_a1000: emac_power_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - led_pins_a1000: led_pins@0 { - pins = "PH10", "PH20"; - function = "gpio_out"; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -236,13 +214,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 6b02de592a0267dd3433483dcf5995de2a6813ad..39ba4ccb9e2e5af505c3134238382d1935f10a9a 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -68,8 +68,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -79,8 +77,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -95,7 +91,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -108,8 +104,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -125,12 +119,6 @@ status = "okay"; }; -&pio { - usb2_vbus_pin_a: usb2_vbus_pin@0 { - pins = "PH12"; - }; -}; - ®_usb0_vbus { regulator-boot-on; status = "okay"; @@ -147,7 +135,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index a7d61994b8fd272d2d4531fe15d1e4e8653622d3..dfc88aee4fe35f04209e585661288cf0dc8f3de9 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -65,8 +65,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -80,14 +78,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5306de4: touchscreen@38 { @@ -104,21 +98,21 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@800 { + button-800 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <800000>; }; - button@1000 { + button-1000 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Back"; linux,code = ; channel = <0>; @@ -127,8 +121,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -141,13 +133,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -164,7 +156,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 404ce769489968214107adca9a6d2d4592e33e3e..1982c8c238c54b3b9d484db4206f6d53a4a2b980 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -90,6 +101,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -99,8 +114,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -109,9 +122,17 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -121,14 +142,12 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -141,8 +160,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -163,13 +180,13 @@ }; &pio { - led_pins_cubieboard: led_pins@0 { + led_pins_cubieboard: led-pins { pins = "PH20", "PH21"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -221,14 +238,14 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index e0777ae808c749bd2e1a81ee2ce1740267971de6..147cbc5e08ac560cbd703da412f47628aca10f3e 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -58,8 +58,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_dsrv9703c>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -77,10 +75,8 @@ max-microvolt = <3000000>; }; - reg_motor: reg_motor { + reg_motor: reg-motor { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&motor_pins>; regulator-name = "vcc-motor"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -90,8 +86,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -105,8 +99,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -118,15 +110,11 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; /* pull-ups and devices require AXP209 LDO3 */ status = "failed"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -134,8 +122,6 @@ reg = <0x38>; interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; touchscreen-size-x = <1024>; touchscreen-size-y = <768>; @@ -146,14 +132,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@400 { + button-400 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <400000>; }; - button@800 { + button-800 { label = "Volume Up"; linux,code = ; channel = <0>; @@ -162,8 +148,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -176,33 +160,13 @@ }; &pio { - bl_en_pin_dsrv9703c: bl_en_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - motor_pins: motor_pins@0 { - pins = "PB3"; - function = "gpio_out"; - }; - - touchscreen_pins: touchscreen_pins@0 { - pins = "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -211,7 +175,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -250,7 +214,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index d8bfd7b74916262dcfeebe7e11cef06d1ca35149..41ca8bded89f020883aa6297dc4453f8a71bbc44 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -72,8 +72,6 @@ */ &codec { /* PH15 controls power to external amplifier (ft2012q) */ - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -91,8 +89,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -104,8 +100,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* Accelerometer */ @@ -122,21 +116,21 @@ status = "okay"; - button@158 { + button-158 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <349206>; }; - button@1142 { + button-1142 { label = "Esc"; linux,code = ; channel = <0>; @@ -145,8 +139,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ @@ -154,13 +146,6 @@ status = "okay"; }; -&pio { - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -197,7 +182,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 856cfc9128e6c5baaff8f71bd76245522e882074..f33e42d6ce8bad174c9778a8f5ccb6a4b66ce751 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -80,8 +80,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy0>; status = "okay"; }; @@ -92,7 +90,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -106,8 +104,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -123,27 +119,11 @@ status = "okay"; }; -&pio { - pinctrl-names = "default"; - pinctrl-0 = <&hackberry_hogs>; - - hackberry_hogs: hogs@0 { - pins = "PH19"; - function = "gpio_out"; - }; - - usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - pins = "PH12"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_hackberry>; gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -156,6 +136,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 6506595268b2a5c0f8ef12ae798a47515b8fe070..35c57d065dd8f2d306da46fb98f09e9f8416e375 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -63,8 +63,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -78,8 +76,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -92,13 +88,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -116,7 +112,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index d51d8c302dafac2fa01e08fe2e57b110b3b04b58..9482e831a9a169e7e9ce7f63108b9a5666d9d66b 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -58,8 +58,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_inet>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -88,8 +86,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -101,8 +97,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* Accelerometer */ @@ -115,8 +109,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5x: touchscreen@38 { @@ -124,8 +116,6 @@ reg = <0x38>; interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_wake_pin>; wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */ touchscreen-size-x = <600>; touchscreen-size-y = <1024>; @@ -137,21 +127,21 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@1000 { + button-1000 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Home"; linux,code = ; channel = <0>; @@ -160,8 +150,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -178,23 +166,13 @@ }; &pio { - bl_en_pin_inet: bl_en_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - touchscreen_wake_pin: touchscreen_wake_pin@0 { - pins = "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -203,7 +181,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -246,7 +224,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index a8e479fe43ca83acf8df79a637b0db864ddb74dc..4b5c91c8e85bff25c135e2d1e1dd2bdf1d19f55d 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -72,8 +72,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -85,14 +83,10 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -109,35 +103,35 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Menu"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@600 { + button-600 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <800000>; }; - button@1000 { + button-1000 { label = "Home"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Esc"; linux,code = ; channel = <0>; @@ -146,8 +140,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -160,13 +152,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -208,7 +200,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 2acb89a87d41f2c07a426c56f67396ddff8d4211..13224f5ac166620efc8c5081cab2972f87de0ec2 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys-polled"; pinctrl-names = "default"; pinctrl-0 = <&key_pins_inet9f>; @@ -67,7 +67,7 @@ #size-cells = <0>; poll-interval = <20>; - button@0 { + left-joystick-left { label = "Left Joystick Left"; linux,code = ; linux,input-type = ; @@ -75,7 +75,7 @@ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ }; - button@1 { + left-joystick-right { label = "Left Joystick Right"; linux,code = ; linux,input-type = ; @@ -83,7 +83,7 @@ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ }; - button@2 { + left-joystick-up { label = "Left Joystick Up"; linux,code = ; linux,input-type = ; @@ -91,7 +91,7 @@ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ }; - button@3 { + left-joystick-down { label = "Left Joystick Down"; linux,code = ; linux,input-type = ; @@ -99,7 +99,7 @@ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ }; - button@4 { + right-joystick-left { label = "Right Joystick Left"; linux,code = ; linux,input-type = ; @@ -107,7 +107,7 @@ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ }; - button@5 { + right-joystick-right { label = "Right Joystick Right"; linux,code = ; linux,input-type = ; @@ -115,7 +115,7 @@ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ }; - button@6 { + right-joystick-up { label = "Right Joystick Up"; linux,code = ; linux,input-type = ; @@ -123,7 +123,7 @@ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ }; - button@7 { + right-joystick-down { label = "Right Joystick Down"; linux,code = ; linux,input-type = ; @@ -131,7 +131,7 @@ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ }; - button@8 { + dpad-left { label = "DPad Left"; linux,code = ; linux,input-type = ; @@ -139,7 +139,7 @@ gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */ }; - button@9 { + dpad-right { label = "DPad Right"; linux,code = ; linux,input-type = ; @@ -147,7 +147,7 @@ gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ }; - button@10 { + dpad-up { label = "DPad Up"; linux,code = ; linux,input-type = ; @@ -155,7 +155,7 @@ gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ }; - button@11 { + dpad-down { label = "DPad Down"; linux,code = ; linux,input-type = ; @@ -163,49 +163,49 @@ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ }; - button@12 { + x { label = "Button X"; linux,code = ; gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */ }; - button@13 { + y { label = "Button Y"; linux,code = ; gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */ }; - button@14 { + a { label = "Button A"; linux,code = ; gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ }; - button@15 { + b { label = "Button B"; linux,code = ; gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */ }; - button@16 { + select { label = "Select Button"; linux,code = ; gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ }; - button@17 { + start { label = "Start Button"; linux,code = ; gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ }; - button@18 { + top-left { label = "Top Left Button"; linux,code = ; gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ }; - button@19 { + top-right { label = "Top Right Button"; linux,code = ; gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */ @@ -222,8 +222,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -235,8 +233,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* Accelerometer */ @@ -249,8 +245,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -267,35 +261,35 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Menu"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@600 { + button-600 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <800000>; }; - button@1000 { + button-1000 { label = "Home"; linux,code = ; channel = <0>; voltage = <1000000>; }; - button@1200 { + button-1200 { label = "Esc"; linux,code = ; channel = <0>; @@ -304,8 +298,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -318,7 +310,7 @@ }; &pio { - key_pins_inet9f: key_pins@0 { + key_pins_inet9f: key-pins { pins = "PA0", "PA1", "PA3", "PA4", "PA5", "PA6", "PA8", "PA9", "PA11", "PA12", "PA13", @@ -328,13 +320,13 @@ bias-pull-up; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -376,7 +368,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 92e3e030ced350baa5698956325b8eb1158e2e97..d22bd79562d87e0ca559060de2745397caaabad0 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -57,7 +57,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; + pinctrl-0 = <&emac_pins>; phy = <&phy1>; status = "okay"; }; @@ -67,6 +67,9 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + axp209: pmic@34 { interrupts = <0>; }; @@ -74,19 +77,19 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; + pinctrl-0 = <&i2c2_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -100,7 +103,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -114,7 +117,11 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>; status = "okay"; }; + +&uart0 { + pinctrl-0 = <&uart0_pb_pins>; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 92b2d4af3d21c667b1b3e32f07131c2171c7f91e..879141ca6027038f81b3975008bf82e9cbdf7e45 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_q5>; green { label = "q5:green:usr"; @@ -74,8 +72,6 @@ reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&emac_power_pin_q5>; regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -98,8 +94,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -109,8 +103,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -125,7 +117,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; @@ -139,8 +131,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -160,18 +150,6 @@ status = "okay"; }; -&pio { - emac_power_pin_q5: emac_power_pin@0 { - pins = "PH19"; - function = "gpio_out"; - }; - - led_pins_q5: led_pins@0 { - pins = "PH20"; - function = "gpio_out"; - }; -}; - ®_usb0_vbus { regulator-boot-on; status = "okay"; @@ -187,7 +165,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 0f927da28ee167961294c7ca21cd58bfc4e07f98..435c551aef0f398375ee42462f4ab590c70f931f 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -61,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_marsboard>; red1 { label = "marsboard:red1:usr"; @@ -107,27 +105,19 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -140,8 +130,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -162,12 +150,7 @@ }; &pio { - led_pins_marsboard: led_pins@0 { - pins = "PB5", "PB6", "PB7", "PB8"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -184,14 +167,14 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index a5ed9e4e22c611bffa1842a6140665ada70b1db3..1b639e5f91720a73c0c921e37c72f6fbac19db05 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -70,8 +70,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -86,18 +84,16 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; -&ir0_rx_pins_a { +&ir0_rx_pins { /* The ir receiver is not always populated */ bias-pull-up; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -132,7 +128,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index 81db6824a2c79c7441f1aa335abde6f84b45e341..7198b34e2e5082cf41679f9bd3f3483539b947a0 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -71,8 +71,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -88,23 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; - - usb2_vbus_pin_mk802: usb2_vbus_pin@0 { - pins = "PH12"; - function = "gpio_out"; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -114,14 +95,13 @@ }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_mk802>; gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; @@ -131,8 +111,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index e74a881fd9a7a56d399742e8116245163810d21e..e460da2eb13961cc14398519c6c91cb2a8a50263 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -67,8 +67,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -82,8 +80,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -105,7 +101,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 462412ee903c54a0bb0c758d85ae2daad96069e9..49247fbe6acd5d73a19d07ceec73be50c1d973a4 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -89,6 +100,10 @@ cooling-max-level = <2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -98,8 +113,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -108,9 +121,17 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -124,8 +145,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -144,8 +163,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -166,24 +183,19 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pin { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -191,7 +203,6 @@ }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -210,7 +221,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 84f55e76df0c211568c5c0975428235dc7f08a4a..6e140547b638f9a45bf63fbe1b8ee5c8387b962a 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino>; tx { label = "pcduino:green:tx"; @@ -76,26 +74,24 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_pcduino>; #address-cells = <1>; #size-cells = <0>; - button@0 { + back { label = "Key Back"; linux,code = ; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - button@1 { + home { label = "Key Home"; linux,code = ; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - button@2 { + menu { label = "Key Menu"; linux,code = ; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; @@ -116,8 +112,6 @@ }; &emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; phy = <&phy1>; status = "okay"; }; @@ -127,8 +121,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -146,8 +138,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -168,17 +158,7 @@ }; &pio { - led_pins_pcduino: led_pins@0 { - pins = "PH15", "PH16"; - function = "gpio_out"; - }; - - key_pins_pcduino: key_pins@0 { - pins = "PH17", "PH18", "PH19"; - function = "gpio_in"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -214,7 +194,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts index 811d00ee2aded649d4aa92674f7da34b0d61e022..bc4f128965ed52e06aa95967ec094b4f2bcd6212 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -55,16 +55,7 @@ compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10"; }; -&pio { - usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { - pins = "PD2"; - function = "gpio_out"; - }; -}; - ®_usb2_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_pcduino2>; gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index c0f8c88b5a7d8ac064a02fa4097f225532bf1966..5081303f79e739e7bb3f865771ca36fabda8b07f 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -58,8 +58,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_protab>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -72,8 +70,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -87,8 +83,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -100,20 +94,14 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; /* pull-ups and devices require AXP209 LDO3 */ status = "failed"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; - pixcir_ts@5c { - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; + touchscreen@5c { compatible = "pixcir,pixcir_tangoc"; reg = <0x5c>; interrupt-parent = <&pio>; @@ -132,14 +120,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@400 { + button-400 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <400000>; }; - button@800 { + button-800 { label = "Volume Down"; linux,code = ; channel = <0>; @@ -148,8 +136,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -162,28 +148,13 @@ }; &pio { - bl_en_pin_protab: bl_en_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - touchscreen_pins: touchscreen_pins@0 { - pins = "PA5", "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -192,7 +163,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -231,7 +202,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 41c2579143fd6b7beb9f9e665e21dd0fd48b4409..b91300d49a31081269789a6e7437e6d707a8a6f4 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -41,14 +41,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include - -#include #include +#include +#include / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&intc>; aliases { @@ -60,46 +60,48 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&de_be0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; - framebuffer@1 { + framebuffer-fe0-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; - framebuffer@2 { + framebuffer-fe0-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; - framebuffer@3 { + framebuffer-fe0-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 5>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; }; @@ -111,7 +113,7 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ @@ -127,7 +129,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -141,14 +143,14 @@ }; trips { - cpu_alert0: cpu_alert0 { + cpu_alert0: cpu-alert0 { /* milliCelsius */ temperature = <850000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu_crit { + cpu_crit: cpu-crit { /* milliCelsius */ temperature = <100000>; hysteresis = <2000>; @@ -158,532 +160,46 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; + }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <3>, - <4>, <5>, <6>, - <7>, <8>, <9>, - <10>, <11>, <12>, - <13>, <14>, <16>, - <17>, <18>, <20>, - <21>, <22>, <23>, - <24>, <25>, <26>, - <32>, <33>, <34>, - <35>, <36>, <37>, - <40>, <41>, <43>, - <44>, <45>, - <46>, <47>, - <50>, <52>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", - "ahb_ohci1", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_mmc3", "ahb_ms", - "ahb_nand", "ahb_sdram", "ahb_ace", - "ahb_emac", "ahb_ts", "ahb_spi0", - "ahb_spi1", "ahb_spi2", "ahb_spi3", - "ahb_pata", "ahb_sata", "ahb_gps", - "ahb_ve", "ahb_tvd", "ahb_tve0", - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", - "ahb_csi0", "ahb_csi1", "ahb_hdmi", - "ahb_de_be0", "ahb_de_be1", - "ahb_de_fe0", "ahb_de_fe1", - "ahb_mp", "ahb_mali400"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <1>, - <2>, <3>, - <5>, <6>, - <7>, <10>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis", - "apb0_pio", "apb0_ir0", - "apb0_ir1", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <4>, - <5>, <6>, - <7>, <16>, - <17>, <18>, - <19>, <20>, - <21>, <22>, - <23>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_can", - "apb1_scr", "apb1_ps20", - "apb1_ps21", "apb1_uart0", - "apb1_uart1", "apb1_uart2", - "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", - "apb1_uart7"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@01c20094 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3", - "mmc3_output", - "mmc3_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - pata_clk: clk@01c200ac { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "pata"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - ir1_clk: clk@01c200b4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir1"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", - "usb_phy"; - }; - - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200d4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-dram-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, <2>, - <3>, - <4>, - <5>, <6>, - <15>, - <24>, <25>, - <26>, <27>, - <28>, <29>; - clock-output-names = "dram_ve", - "dram_csi0", "dram_csi1", - "dram_ts", - "dram_tvd", - "dram_tve0", "dram_tve1", - "dram_output", - "dram_de_fe1", "dram_de_fe0", - "dram_de_be0", "dram_de_be1", - "dram_de_mp", "dram_ace"; - }; - - de_be0_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be0"; - }; - - de_be1_clk: clk@01c20108 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20108 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be1"; - }; - - de_fe0_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe0"; - }; - - de_fe1_clk: clk@01c20110 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20110 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe1"; - }; - - - tcon0_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch0-sclk"; - - }; - - tcon1_ch0_clk: clk@01c2011c { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2011c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch0-sclk"; - - }; - - tcon0_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch1-sclk"; - - }; - - tcon1_ch1_clk: clk@01c20130 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c20130 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch1-sclk"; - - }; - - ve_clk: clk@01c2013c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-ve-clk"; - reg = <0x01c2013c 0x4>; - clocks = <&pll4>; - clock-output-names = "ve"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; + de: display-engine { + compatible = "allwinner,sun4i-a10-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; }; - soc@01c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -697,14 +213,14 @@ }; }; - sram_d: sram@00010000 { + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -712,19 +228,19 @@ }; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -733,11 +249,11 @@ #size-cells = <0>; }; - spi0: spi@01c05000 { + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -747,30 +263,34 @@ #size-cells = <0>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - emac: ethernet@01c0b000 { + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; status = "disabled"; }; - mdio: mdio@01c0b080 { + mdio: mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -778,78 +298,154 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun4i-a10-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + tcon0_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun4i-a10-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = <45>; + resets = <&ccu RST_TCON1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD1>, + <&ccu CLK_TCON1_CH0>, + <&ccu CLK_TCON1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon1>; + }; + + tcon1_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; interrupts = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; interrupts = <33>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; interrupts = <34>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, - <&mmc3_clk 0>, - <&mmc3_clk 1>, - <&mmc3_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>; + clock-names = "ahb", "mmc"; interrupts = <35>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -859,51 +455,95 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <86>; - clocks = <&ahb_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; }; - spi2: spi@01c17000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun4i-a10-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu 9>, + <&ccu 18>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -913,39 +553,39 @@ #size-cells = <0>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = <56>; - clocks = <&pll6 0>, <&ahb_gates 25>; + clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; status = "disabled"; }; - ehci1: usb@01c1c000 { + ehci1: usb@1c1c000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = <40>; - clocks = <&ahb_gates 3>; + clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - ohci1: usb@01c1c400 { + ohci1: usb@1c1c400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = <65>; - clocks = <&usb_clk 7>, <&ahb_gates 4>; + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - spi3: spi@01c1f000 { + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; interrupts = <50>; - clocks = <&ahb_gates 23>, <&spi3_clk>; + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 31>, <&dma SUN4I_DMA_DEDICATED 30>; @@ -955,30 +595,39 @@ #size-cells = <0>; }; - intc: interrupt-controller@01c20400 { + ccu: clock@1c20000 { + compatible = "allwinner,sun4i-a10-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + intc: interrupt-controller@1c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; - can0_pins_a: can0@0 { + can0_ph_pins: can0-ph-pins { pins = "PH20", "PH21"; function = "can"; }; - emac_pins_a: emac0@0 { + emac_pins: emac0-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -987,42 +636,42 @@ function = "emac"; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pins: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - ir0_tx_pins_a: ir0@1 { + ir0_tx_pins: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; - ir1_rx_pins_a: ir1@0 { + ir1_rx_pins: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; - ir1_tx_pins_a: ir1@1 { + ir1_tx_pins: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -1030,107 +679,107 @@ bias-pull-up; }; - ps20_pins_a: ps20@0 { + ps2_ch0_pins: ps2-ch0-pins { pins = "PI20", "PI21"; function = "ps2"; }; - ps21_pins_a: ps21@0 { + ps2_ch1_ph_pins: ps2-ch1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; - pwm0_pins_a: pwm0@0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; - pwm1_pins_a: pwm1@0 { + pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; - spi0_pins_a: spi0@0 { + spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; - spi0_cs0_pins_a: spi0_cs0@0 { + spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; - spi1_pins_a: spi1@0 { + spi1_pins: spi1-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; - spi1_cs0_pins_a: spi1_cs0@0 { + spi1_cs0_pin: spi1-cs0-pin { pins = "PI16"; function = "spi1"; }; - spi2_pins_a: spi2@0 { - pins = "PC20", "PC21", "PC22"; + spi2_pb_pins: spi2-pb-pins { + pins = "PB15", "PB16", "PB17"; function = "spi2"; }; - spi2_pins_b: spi2@1 { - pins = "PB15", "PB16", "PB17"; + spi2_pc_pins: spi2-pc-pins { + pins = "PC20", "PC21", "PC22"; function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - pins = "PC19"; + spi2_cs0_pb_pin: spi2-cs0-pb-pin { + pins = "PB14"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { - pins = "PB14"; + spi2_cs0_pc_pins: spi2-cs0-pc-pin { + pins = "PC19"; function = "spi2"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; - uart0_pins_b: uart0@1 { + uart0_pf_pins: uart0-pf-pins { pins = "PF2", "PF4"; function = "uart0"; }; - uart1_pins_a: uart1@0 { + uart1_pins: uart1-pins { pins = "PA10", "PA11"; function = "uart1"; }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; clocks = <&osc24M>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - rtc: rtc@01c20d00 { + rtc: rtc@1c20d00 { compatible = "allwinner,sun4i-a10-rtc"; reg = <0x01c20d00 0x20>; interrupts = <24>; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun4i-a10-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; @@ -1138,12 +787,12 @@ status = "disabled"; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -1151,37 +800,50 @@ status = "disabled"; }; - ir0: ir@01c21800 { + ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; clock-names = "apb", "ir"; interrupts = <5>; reg = <0x01c21800 0x40>; status = "disabled"; }; - ir1: ir@01c21c00 { + ir1: ir@1c21c00 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 7>, <&ir1_clk>; + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; clock-names = "apb", "ir"; interrupts = <6>; reg = <0x01c21c00 0x40>; status = "disabled"; }; - lradc: lradc@01c22800 { + i2s0: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <16>; + clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -1189,150 +851,316 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = <17>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; + clocks = <&ccu CLK_APB1_UART4>; status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = <18>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; + clocks = <&ccu CLK_APB1_UART5>; status = "disabled"; }; - uart6: serial@01c29800 { + uart6: serial@1c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; interrupts = <19>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 22>; + clocks = <&ccu CLK_APB1_UART6>; status = "disabled"; }; - uart7: serial@01c29c00 { + uart7: serial@1c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; interrupts = <20>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 23>; + clocks = <&ccu CLK_APB1_UART7>; status = "disabled"; }; - ps20: ps2@01c2a000 { + ps20: ps2@1c2a000 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = <62>; - clocks = <&apb1_gates 6>; + clocks = <&ccu CLK_APB1_PS20>; status = "disabled"; }; - ps21: ps2@01c2a400 { + ps21: ps2@1c2a400 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a400 0x400>; interrupts = <63>; - clocks = <&apb1_gates 7>; + clocks = <&ccu CLK_APB1_PS21>; status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = <26>; - clocks = <&apb1_gates 4>; + clocks = <&ccu CLK_APB1_CAN>; status = "disabled"; }; + + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun4i-a10-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@1e20000 { + compatible = "allwinner,sun4i-a10-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = <48>; + clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, + <&ccu CLK_DRAM_DE_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@1e40000 { + compatible = "allwinner,sun4i-a10-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = <48>; + clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, + <&ccu CLK_DRAM_DE_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_be0>; + }; + + be1_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be1>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun4i-a10-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <47>; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + be0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 18f25c5e75aebc3584699ec661b07fde5610f17c..6ae4d95e230e58a468c908d85c2cfaf8d87894a0 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -76,8 +76,8 @@ allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - hdmi: hdmi@01c16000 { + soc@1c00000 { + hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; interrupts = <58>; @@ -111,7 +111,7 @@ }; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; clocks = <&ccu CLK_HOSC>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 6436bad94404d21e1edd012992d2983053ae7428..4e830f5cb7f1ddb085710e56f659ffc74926bdc7 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -88,8 +88,8 @@ allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - pwm: pwm@01c20e00 { + soc@1c00000 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; clocks = <&ccu CLK_HOSC>; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index 3eb56cad0ceaa2b44fc218c66103502b25766615..ef0b7446a99d1113e9baa797d689c4950177743d 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -54,8 +54,8 @@ allwinner,pipelines = <&fe0>; }; - soc@01c00000 { - pwm: pwm@01c20e00 { + soc@1c00000 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; clocks = <&ccu CLK_HOSC>; @@ -63,7 +63,7 @@ status = "disabled"; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; @@ -76,7 +76,7 @@ status = "disabled"; }; - i2s0: i2s@01c22400 { + i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 8a4d2277826f03fccdb52b4e1cf4ecbd5f511fa0..49229b3d5492534c3938d77631ac2bff27de9d39 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -110,6 +110,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + &lradc { vref-supply = <®_ldo2>; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 98cc00341b005486a800394797696ea4675a060a..07f2248ed5f8b5931978bd5c3fee53c58cc6ec38 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -93,7 +93,7 @@ #size-cells = <1>; ranges; - osc24M: clk@01c20050 { + osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -108,20 +108,20 @@ }; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -135,14 +135,14 @@ status = "disabled"; }; - sram_d: sram@00010000 { + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -150,7 +150,7 @@ }; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; @@ -158,7 +158,7 @@ #dma-cells = <2>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -171,7 +171,7 @@ #size-cells = <0>; }; - spi0: spi@01c05000 { + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; @@ -185,7 +185,7 @@ #size-cells = <0>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; @@ -199,7 +199,7 @@ #size-cells = <0>; }; - tve0: tv-encoder@01c0a000 { + tve0: tv-encoder@1c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; clocks = <&ccu CLK_AHB_TVE>; @@ -217,7 +217,7 @@ }; }; - emac: ethernet@01c0b000 { + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; @@ -226,7 +226,7 @@ status = "disabled"; }; - mdio: mdio@01c0b080 { + mdio: mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -234,7 +234,7 @@ #size-cells = <0>; }; - tcon0: lcd-controller@01c0c000 { + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; @@ -278,7 +278,7 @@ }; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; @@ -289,7 +289,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; @@ -300,7 +300,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; @@ -311,7 +311,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; clocks = <&ccu CLK_AHB_OTG>; @@ -324,7 +324,7 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4>; @@ -336,7 +336,7 @@ status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; @@ -346,7 +346,7 @@ status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; @@ -356,7 +356,7 @@ status = "disabled"; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun5i-a13-crypto", "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; @@ -365,7 +365,7 @@ clock-names = "ahb", "mod"; }; - spi2: spi@01c17000 { + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; @@ -379,7 +379,7 @@ #size-cells = <0>; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; clock-names = "hosc", "losc"; @@ -387,14 +387,14 @@ #reset-cells = <1>; }; - intc: interrupt-controller@01c20400 { + intc: interrupt-controller@1c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { reg = <0x01c20800 0x400>; interrupts = <28>; clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; @@ -538,19 +538,19 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; clocks = <&ccu CLK_HOSC>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - ir0: ir@01c21800 { + ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; clock-names = "apb", "ir"; @@ -559,14 +559,14 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; @@ -579,19 +579,19 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; @@ -601,7 +601,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; @@ -611,7 +611,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <3>; @@ -621,7 +621,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = <4>; @@ -631,7 +631,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; @@ -641,7 +641,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; @@ -651,7 +651,7 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; @@ -661,14 +661,14 @@ #size-cells = <0>; }; - timer@01c60000 { + timer@1c60000 { compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <82>, <83>; clocks = <&ccu CLK_AHB_HSTIMER>; }; - fe0: display-frontend@01e00000 { + fe0: display-frontend@1e00000 { compatible = "allwinner,sun5i-a13-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = <47>; @@ -696,7 +696,7 @@ }; }; - be0: display-backend@01e60000 { + be0: display-backend@1e60000 { compatible = "allwinner,sun5i-a13-display-backend"; reg = <0x01e60000 0x10000>; interrupts = <47>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 9ecb5f0b3f83e889b2536dd7531a7c45e1fbc4d7..19e382a11297e1f753c250c20e35de3784e0aaea 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -62,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vga-connector { compatible = "vga-connector"; @@ -162,6 +173,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index eef072a21accaed0c29d6407d076331ad579a987..8bfa12b548e0a2acf8f285505cd3699e27519e86 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -221,7 +221,7 @@ clock-output-names = "gmac_int_tx"; }; - gmac_tx_clk: clk@01c200d0 { + gmac_tx_clk: clk@1c200d0 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c200d0 0x4>; @@ -236,13 +236,13 @@ status = "disabled"; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; interrupts = ; @@ -251,7 +251,7 @@ #dma-cells = <1>; }; - tcon0: lcd-controller@01c0c000 { + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0c000 0x1000>; interrupts = ; @@ -278,17 +278,28 @@ reg = <0>; remote-endpoint = <&drc0_out_tcon0>; }; + + tcon0_in_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon0>; + }; }; tcon0_out: port@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; }; - tcon1: lcd-controller@01c0d000 { + tcon1: lcd-controller@1c0d000 { compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0d000 0x1000>; interrupts = ; @@ -311,6 +322,11 @@ #size-cells = <0>; reg = <0>; + tcon1_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon1>; + }; + tcon1_in_drc1: endpoint@1 { reg = <1>; remote-endpoint = <&drc1_out_tcon1>; @@ -321,11 +337,17 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; }; }; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_AHB1_MMC0>, @@ -344,7 +366,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_AHB1_MMC1>, @@ -363,7 +385,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_AHB1_MMC2>, @@ -382,7 +404,7 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ccu CLK_AHB1_MMC3>, @@ -401,7 +423,50 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun6i-a31-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>, + <&ccu 7>, + <&ccu 13>; + clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; + resets = <&ccu RST_AHB1_HDMI>; + reset-names = "ahb"; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + dmas = <&dma 13>, <&dma 13>, <&dma 14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + usb_otg: usb@1c19000 { compatible = "allwinner,sun6i-a31-musb"; reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_AHB1_OTG>; @@ -414,7 +479,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun6i-a31-usb-phy"; reg = <0x01c19400 0x10>, <0x01c1a800 0x4>, @@ -438,7 +503,7 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; @@ -449,7 +514,7 @@ status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; @@ -460,7 +525,7 @@ status = "disabled"; }; - ehci1: usb@01c1b000 { + ehci1: usb@1c1b000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = ; @@ -471,7 +536,7 @@ status = "disabled"; }; - ohci1: usb@01c1b400 { + ohci1: usb@1c1b400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = ; @@ -482,7 +547,7 @@ status = "disabled"; }; - ohci2: usb@01c1c400 { + ohci2: usb@1c1c400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; @@ -491,7 +556,7 @@ status = "disabled"; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -500,7 +565,7 @@ #reset-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; interrupts = , @@ -633,7 +698,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -644,12 +709,12 @@ clocks = <&osc24M>; }; - wdt1: watchdog@01c20ca0 { + wdt1: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-spdif"; reg = <0x01c21000 0x400>; @@ -662,21 +727,47 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>; + resets = <&ccu RST_APB1_DAUDIO0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>; + resets = <&ccu RST_APB1_DAUDIO1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun6i-a31-ts"; reg = <0x01c25000 0x100>; interrupts = ; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -689,7 +780,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -702,7 +793,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -715,7 +806,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; @@ -728,7 +819,7 @@ status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; @@ -741,7 +832,7 @@ status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = ; @@ -754,7 +845,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -765,7 +856,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -776,7 +867,7 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; @@ -787,7 +878,7 @@ #size-cells = <0>; }; - i2c3: i2c@01c2b800 { + i2c3: i2c@1c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; @@ -798,7 +889,7 @@ #size-cells = <0>; }; - gmac: ethernet@01c30000 { + gmac: ethernet@1c30000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c30000 0x1054>; interrupts = ; @@ -815,7 +906,7 @@ #size-cells = <0>; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun6i-a31-crypto", "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; @@ -826,7 +917,7 @@ reset-names = "ahb"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-codec"; reg = <0x01c22c00 0x400>; @@ -839,7 +930,7 @@ status = "disabled"; }; - timer@01c60000 { + timer@1c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; @@ -851,7 +942,7 @@ resets = <&ccu RST_AHB1_HSTIMER>; }; - spi0: spi@01c68000 { + spi0: spi@1c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; interrupts = ; @@ -863,7 +954,7 @@ status = "disabled"; }; - spi1: spi@01c69000 { + spi1: spi@1c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = ; @@ -875,7 +966,7 @@ status = "disabled"; }; - spi2: spi@01c6a000 { + spi2: spi@1c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = ; @@ -887,7 +978,7 @@ status = "disabled"; }; - spi3: spi@01c6b000 { + spi3: spi@1c6b000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6b000 0x1000>; interrupts = ; @@ -899,7 +990,7 @@ status = "disabled"; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -910,7 +1001,7 @@ interrupts = ; }; - fe0: display-frontend@01e00000 { + fe0: display-frontend@1e00000 { compatible = "allwinner,sun6i-a31-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = ; @@ -942,7 +1033,7 @@ }; }; - fe1: display-frontend@01e20000 { + fe1: display-frontend@1e20000 { compatible = "allwinner,sun6i-a31-display-frontend"; reg = <0x01e20000 0x20000>; interrupts = ; @@ -974,7 +1065,7 @@ }; }; - be1: display-backend@01e40000 { + be1: display-backend@1e40000 { compatible = "allwinner,sun6i-a31-display-backend"; reg = <0x01e40000 0x10000>; interrupts = ; @@ -1020,7 +1111,7 @@ }; }; - drc1: drc@01e50000 { + drc1: drc@1e50000 { compatible = "allwinner,sun6i-a31-drc"; reg = <0x01e50000 0x10000>; interrupts = ; @@ -1053,6 +1144,11 @@ #size-cells = <0>; reg = <1>; + drc1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc1>; + }; + drc1_out_tcon1: endpoint@1 { reg = <1>; remote-endpoint = <&tcon1_in_drc1>; @@ -1061,7 +1157,7 @@ }; }; - be0: display-backend@01e60000 { + be0: display-backend@1e60000 { compatible = "allwinner,sun6i-a31-display-backend"; reg = <0x01e60000 0x10000>; interrupts = ; @@ -1107,7 +1203,7 @@ }; }; - drc0: drc@01e70000 { + drc0: drc@1e70000 { compatible = "allwinner,sun6i-a31-drc"; reg = <0x01e70000 0x10000>; interrupts = ; @@ -1144,11 +1240,16 @@ reg = <0>; remote-endpoint = <&tcon0_in_drc0>; }; + + drc0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc0>; + }; }; }; }; - rtc: rtc@01f00000 { + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , @@ -1163,7 +1264,7 @@ interrupts = ; }; - prcm@01f01400 { + prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; @@ -1215,12 +1316,12 @@ }; }; - cpucfg@01f01c00 { + cpucfg@1f01c00 { compatible = "allwinner,sun6i-a31-cpuconfig"; reg = <0x01f01c00 0x300>; }; - ir: ir@01f02000 { + ir: ir@1f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; clock-names = "apb", "ir"; @@ -1230,7 +1331,7 @@ status = "disabled"; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun6i-a31-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = , @@ -1255,7 +1356,7 @@ }; }; - p2wi: i2c@01f03400 { + p2wi: i2c@1f03400 { compatible = "allwinner,sun6i-a31-p2wi"; reg = <0x01f03400 0x400>; interrupts = ; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 4c10123509c40402f4fb5658a8421de940eccf1a..0cdb38ab33779809e96433f04b1b18616a7746cb 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -52,17 +52,42 @@ / { model = "MSI Primo81 tablet"; compatible = "msi,primo81", "allwinner,sun6i-a31s"; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; }; &cpu0 { cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { /* rtl8188etv wifi is connected here */ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { /* pull-ups and device VDDIO use AXP221 DLDO3 */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index b3d98222bd8134700addbef18b22b57464999e07..298476485bb47830a03751cf28f3c246dca2d2e9 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -53,6 +53,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -90,6 +101,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { /* USB 2.0 4 port hub IC */ status = "okay"; @@ -112,6 +127,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index eb55e74232c9928a18b76c8768c3b224b5031644..4ed3162e3e5a009240c4771f140818b21c4b4879 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -109,6 +120,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -130,6 +145,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 2a50207618cb366409df6122a3b1649fe62cf7a9..39f43e4eb7423ea2faa2052eb8e74b5d08c9b934 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -91,6 +102,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -111,6 +126,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 852a0aa24dcee6c577b167c9d36d9c01b9a59403..8c9bedc602ecdfc7b5823c6c6e1b3f0725a7720e 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -126,6 +137,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -146,6 +161,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 004b6ddac8131c26d381aa046060a3876c6729e8..442f3c755f365b091ab18c25996936847551e510 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -98,6 +109,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -173,6 +188,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -241,6 +266,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_ahci_5v { gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 2ce1a9f13a178fa1315f5aac061ee6e0fcb80fcb..edf9c3c6c0d7f4636e0e52392e4642667e549e46 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -62,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -80,6 +91,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -100,6 +115,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 097bd755764cfbff148ade65c15561ec33dd3325..ba250189d07f66be0c8939cbbe1a43c0ede4f27f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -85,6 +96,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -105,6 +120,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts new file mode 100644 index 0000000000000000000000000000000000000000..d99e7b193efe39550f1b4a18f39bb7d8521c68f6 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts @@ -0,0 +1,70 @@ + /* + * Copyright 2017 Olimex Ltd. + * Stefan Mavrodiev + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun7i-a20-olinuxino-micro.dts" + +/ { + model = "Olimex A20-OLinuXino-MICRO-eMMC"; + compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 0b7403e4d687ea341c8f053dcc1da179f0acf162..dffbaa24b3ee7d125f824e239063a43e1e8aacef 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -66,6 +66,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -92,6 +103,10 @@ cpu-supply = <®_dcdc2>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -102,7 +117,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -112,6 +127,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -229,6 +254,11 @@ }; &pio { + gmac_txerr: gmac_txerr@0 { + pins = "PA17"; + function = "gmac"; + }; + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { pins = "PH11"; function = "gpio_in"; @@ -256,6 +286,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -330,6 +368,10 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 96bee776e1456b2e8787390bbcadbaecfb8563cd..68dfa82544fc4c574916c3d60c17a60097ddb2b1 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -46,9 +46,9 @@ #include #include - -#include #include +#include +#include / { interrupt-parent = <&gic>; @@ -66,9 +66,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&de_be0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>, + <&ccu CLK_HDMI>; status = "disabled"; }; @@ -76,9 +77,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, - <&de_be0_clk>, <&tcon0_ch0_clk>, - <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -86,10 +87,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, - <&de_be0_clk>, <&tcon0_ch1_clk>, - <&dram_gates 5>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, + <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>, + <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; }; @@ -102,7 +103,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ @@ -181,23 +182,13 @@ #size-cells = <1>; ranges; - osc24M: clk@01c20050 { + osc24M: clk@1c20050 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; + compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -205,528 +196,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&pll3>; - clock-div = <1>; - clock-mult = <2>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-pll4-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6", - "pll6_div_4"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&pll7>; - clock-div = <1>; - clock-mult = <2>; - clock-output-names = "pll7-2x"; - }; - - pll8: clk@01c20040 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-pll4-clk"; - reg = <0x01c20040 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll8"; - }; - - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&pll6 3>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 3>; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, <8>, - <9>, <10>, <11>, <12>, - <13>, <14>, <16>, - <17>, <18>, <20>, <21>, - <22>, <23>, <25>, - <28>, <32>, <33>, <34>, - <35>, <36>, <37>, <40>, - <41>, <42>, <43>, - <44>, <45>, <46>, - <47>, <49>, <50>, - <52>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms", - "ahb_nand", "ahb_sdram", "ahb_ace", - "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", - "ahb_spi2", "ahb_spi3", "ahb_sata", - "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0", - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0", - "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0", - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", - "ahb_de_fe1", "ahb_gmac", "ahb_mp", - "ahb_mali"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, - <8>, <10>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_i2s0", "apb0_i2s1", - "apb0_pio", "apb0_ir0", "apb0_ir1", - "apb0_i2s2", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <5>, <6>, <7>, - <15>, <16>, <17>, - <18>, <19>, <20>, - <21>, <22>, <23>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_i2c3", "apb1_can", - "apb1_scr", "apb1_ps20", "apb1_ps21", - "apb1_i2c4", "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", "apb1_uart7"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@01c20094 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3", - "mmc3_output", - "mmc3_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - pata_clk: clk@01c200ac { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "pata"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - ir1_clk: clk@01c200b4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir1"; - }; - - i2s0_clk: clk@01c200b8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200b8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s0"; - }; - - ac97_clk: clk@01c200bc { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200bc 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "ac97"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - keypad_clk: clk@01c200c4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200c4 0x4>; - clocks = <&osc24M>; - clock-output-names = "keypad"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", - "usb_phy"; - }; - - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200d4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; - - i2s1_clk: clk@01c200d8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200d8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s1"; - }; - - i2s2_clk: clk@01c200dc { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200dc 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s2"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-dram-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, <2>, - <3>, - <4>, - <5>, <6>, - <15>, - <24>, <25>, - <26>, <27>, - <28>, <29>; - clock-output-names = "dram_ve", - "dram_csi0", "dram_csi1", - "dram_ts", - "dram_tvd", - "dram_tve0", "dram_tve1", - "dram_output", - "dram_de_fe1", "dram_de_fe0", - "dram_de_be0", "dram_de_be1", - "dram_de_mp", "dram_ace"; - }; - - de_be0_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be0"; - }; - - de_be1_clk: clk@01c20108 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20108 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be1"; - }; - - de_fe0_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe0"; - }; - - de_fe1_clk: clk@01c20110 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20110 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe1"; - }; - - tcon0_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch0-sclk"; - - }; - - tcon1_ch0_clk: clk@01c2011c { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2011c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch0-sclk"; - - }; - - tcon0_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch1-sclk"; - - }; - - tcon1_ch1_clk: clk@01c20130 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c20130 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch1-sclk"; - - }; - - ve_clk: clk@01c2013c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-ve-clk"; - reg = <0x01c2013c 0x4>; - clocks = <&pll4>; - clock-output-names = "ve"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; - clock-output-names = "mbus"; - }; - /* * The following two are dummy clocks, placeholders * used in the gmac_tx clock. The gmac driver will @@ -736,71 +205,50 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@2 { + mii_phy_tx_clk: clk@1 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@3 { + gmac_int_tx_clk: clk@2 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "gmac_int_tx"; }; - gmac_tx_clk: clk@01c20164 { + gmac_tx_clk: clk@1c20164 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c20164 0x4>; clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; clock-output-names = "gmac_tx"; }; + }; - /* - * Dummy clock used by output clocks - */ - osc24M_32k: clk@1 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <750>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc24M_32k"; - }; - clk_out_a: clk@01c201f0 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-out-clk"; - reg = <0x01c201f0 0x4>; - clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; - clock-output-names = "clk_out_a"; - }; - - clk_out_b: clk@01c201f4 { - #clock-cells = <0>; - compatible = "allwinner,sun7i-a20-out-clk"; - reg = <0x01c201f4 0x4>; - clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; - clock-output-names = "clk_out_b"; - }; + de: display-engine { + compatible = "allwinner,sun7i-a20-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@01c00000 { + sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; - sram_a: sram@00000000 { + sram_a: sram@0 { compatible = "mmio-sram"; reg = <0x00000000 0xc000>; #address-cells = <1>; @@ -814,14 +262,14 @@ }; }; - sram_d: sram@00010000 { + sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; - otg_sram: sram-section@0000 { + otg_sram: sram-section@0 { compatible = "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; @@ -829,7 +277,7 @@ }; }; - nmi_intc: interrupt-controller@01c00030 { + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; @@ -837,19 +285,19 @@ interrupts = ; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = ; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = ; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -858,11 +306,11 @@ #size-cells = <0>; }; - spi0: spi@01c05000 { + spi0: spi@1c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = ; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -873,11 +321,11 @@ num-cs = <4>; }; - spi1: spi@01c06000 { + spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = ; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -888,16 +336,16 @@ num-cs = <1>; }; - emac: ethernet@01c0b000 { + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = ; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; status = "disabled"; }; - mdio: mdio@01c0b080 { + mdio: mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -905,13 +353,111 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun7i-a20-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = ; + resets = <&ccu RST_TCON0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD0>, + <&ccu CLK_TCON0_CH0>, + <&ccu CLK_TCON0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + + tcon0_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun7i-a20-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = ; + resets = <&ccu RST_TCON1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB_LCD1>, + <&ccu CLK_TCON1_CH0>, + <&ccu CLK_TCON1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + dmas = <&dma SUN4I_DMA_DEDICATED 15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon1>; + }; + + tcon1_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_AHB_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -922,13 +468,13 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_AHB_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -939,13 +485,13 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_AHB_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -956,13 +502,13 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, - <&mmc3_clk 0>, - <&mmc3_clk 1>, - <&mmc3_clk 2>; + clocks = <&ccu CLK_AHB_MMC3>, + <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -973,10 +519,10 @@ #size-cells = <0>; }; - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = ; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -986,52 +532,97 @@ status = "disabled"; }; - usbphy: phy@01c13400 { + usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = ; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = ; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun7i-a20-crypto", "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; - clocks = <&ahb_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; }; - spi2: spi@01c17000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun7i-a20-hdmi", + "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, + <&ccu 9>, + <&ccu 18>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = ; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -1042,39 +633,39 @@ num-cs = <1>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = ; - clocks = <&pll6 0>, <&ahb_gates 25>; + clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; status = "disabled"; }; - ehci1: usb@01c1c000 { + ehci1: usb@1c1c000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = ; - clocks = <&ahb_gates 3>; + clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - ohci1: usb@01c1c400 { + ohci1: usb@1c1c400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; - clocks = <&usb_clk 7>, <&ahb_gates 4>; + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - spi3: spi@01c1f000 { + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; interrupts = ; - clocks = <&ahb_gates 23>, <&spi3_clk>; + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 31>, <&dma SUN4I_DMA_DEDICATED 30>; @@ -1085,11 +676,20 @@ num-cs = <1>; }; - pio: pinctrl@01c20800 { + ccu: clock@1c20000 { + compatible = "allwinner,sun7i-a20-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; interrupts = ; - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1324,7 +924,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = , @@ -1336,18 +936,18 @@ clocks = <&osc24M>; }; - wdt: watchdog@01c20c90 { + wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; - rtc: rtc@01c20d00 { + rtc: rtc@1c20d00 { compatible = "allwinner,sun7i-a20-rtc"; reg = <0x01c20d00 0x20>; interrupts = ; }; - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; @@ -1355,12 +955,12 @@ status = "disabled"; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = ; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -1368,30 +968,30 @@ status = "disabled"; }; - ir0: ir@01c21800 { + ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; clock-names = "apb", "ir"; interrupts = ; reg = <0x01c21800 0x40>; status = "disabled"; }; - ir1: ir@01c21c00 { + ir1: ir@1c21c00 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 7>, <&ir1_clk>; + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; clock-names = "apb", "ir"; interrupts = ; reg = <0x01c21c00 0x40>; status = "disabled"; }; - i2s1: i2s@01c22000 { + i2s1: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22000 0x400>; interrupts = ; - clocks = <&apb0_gates 4>, <&i2s1_clk>; + clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 4>, <&dma SUN4I_DMA_NORMAL 4>; @@ -1399,12 +999,12 @@ status = "disabled"; }; - i2s0: i2s@01c22400 { + i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; interrupts = ; - clocks = <&apb0_gates 3>, <&i2s0_clk>; + clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 3>, <&dma SUN4I_DMA_NORMAL 3>; @@ -1412,19 +1012,19 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - codec: codec@01c22c00 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun7i-a20-codec"; reg = <0x01c22c00 0x40>; interrupts = ; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -1432,17 +1032,17 @@ status = "disabled"; }; - sid: eeprom@01c23800 { + sid: eeprom@1c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; }; - i2s2: i2s@01c24400 { + i2s2: i2s@1c24400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c24400 0x400>; interrupts = ; - clocks = <&apb0_gates 8>, <&i2s2_clk>; + clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 6>, <&dma SUN4I_DMA_NORMAL 6>; @@ -1450,179 +1050,179 @@ status = "disabled"; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = ; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; + clocks = <&ccu CLK_APB1_UART4>; status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; + clocks = <&ccu CLK_APB1_UART5>; status = "disabled"; }; - uart6: serial@01c29800 { + uart6: serial@1c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 22>; + clocks = <&ccu CLK_APB1_UART6>; status = "disabled"; }; - uart7: serial@01c29c00 { + uart7: serial@1c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 23>; + clocks = <&ccu CLK_APB1_UART7>; status = "disabled"; }; - ps20: ps2@01c2a000 { + ps20: ps2@1c2a000 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = ; - clocks = <&apb1_gates 6>; + clocks = <&ccu CLK_APB1_PS20>; status = "disabled"; }; - ps21: ps2@01c2a400 { + ps21: ps2@1c2a400 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a400 0x400>; interrupts = ; - clocks = <&apb1_gates 7>; + clocks = <&ccu CLK_APB1_PS21>; status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c3: i2c@01c2b800 { + i2c3: i2c@1c2b800 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; - clocks = <&apb1_gates 3>; + clocks = <&ccu CLK_APB1_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun7i-a20-can", "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = ; - clocks = <&apb1_gates 4>; + clocks = <&ccu CLK_APB1_CAN>; status = "disabled"; }; - i2c4: i2c@01c2c000 { + i2c4: i2c@1c2c000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = ; - clocks = <&apb1_gates 15>; + clocks = <&ccu CLK_APB1_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - gmac: ethernet@01c50000 { + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>; interrupts = ; interrupt-names = "macirq"; - clocks = <&ahb_gates 49>, <&gmac_tx_clk>; + clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; snps,pbl = <2>; snps,fixed-burst; @@ -1632,17 +1232,17 @@ #size-cells = <0>; }; - hstimer@01c60000 { + hstimer@1c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = , , , ; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -1653,5 +1253,164 @@ interrupts = ; }; + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun7i-a20-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_DRAM_DE_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@1e20000 { + compatible = "allwinner,sun7i-a20-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, + <&ccu CLK_DRAM_DE_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@1e40000 { + compatible = "allwinner,sun7i-a20-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, + <&ccu CLK_DRAM_DE_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_be0>; + }; + + be1_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be1>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun7i-a20-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DRAM_DE_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_DE_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + + be0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_be0>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index ea50dda75adceba97c0d9f16ff4f90eab366c3d9..971f9be699a7cbe7fe761f3ae671c09335fa337a 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -118,13 +118,13 @@ }; }; - soc@01c00000 { + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; interrupts = ; @@ -133,7 +133,7 @@ #dma-cells = <1>; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, @@ -152,7 +152,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, @@ -171,7 +171,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, @@ -190,7 +190,7 @@ #size-cells = <0>; }; - nfc: nand@01c03000 { + nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = ; @@ -203,7 +203,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; @@ -216,7 +216,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { /* * compatible and address regions get set in * SoC specific dtsi file @@ -233,7 +233,7 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; @@ -244,7 +244,7 @@ status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; @@ -255,7 +255,7 @@ status = "disabled"; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; @@ -263,7 +263,7 @@ #reset-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ @@ -344,7 +344,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -352,13 +352,13 @@ clocks = <&osc24M>; }; - wdt0: watchdog@01c20ca0 { + wdt0: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; }; - pwm: pwm@01c21400 { + pwm: pwm@1c21400 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c21400 0xc>; clocks = <&osc24M>; @@ -366,14 +366,14 @@ status = "disabled"; }; - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -386,7 +386,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -399,7 +399,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -412,7 +412,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; @@ -425,7 +425,7 @@ status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; @@ -438,7 +438,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -449,7 +449,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -460,7 +460,7 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; @@ -498,7 +498,7 @@ assigned-clock-rates = <384000000>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -509,7 +509,7 @@ interrupts = ; }; - rtc: rtc@01f00000 { + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , @@ -527,7 +527,7 @@ interrupts = ; }; - prcm@01f01400 { + prcm@1f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -575,12 +575,12 @@ }; }; - cpucfg@01f01c00 { + cpucfg@1f01c00 { compatible = "allwinner,sun8i-a23-cpuconfig"; reg = <0x01f01c00 0x300>; }; - r_uart: serial@01f02800 { + r_uart: serial@1f02800 { compatible = "snps,dw-apb-uart"; reg = <0x01f02800 0x400>; interrupts = ; @@ -591,7 +591,7 @@ status = "disabled"; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; @@ -618,7 +618,7 @@ }; }; - r_rsb: rsb@01f03400 { + r_rsb: rsb@1f03400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x01f03400 0x400>; interrupts = ; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 4d1f929780a8df4f831710c74cf6bbd0659c79dc..58e6585b504bab464c3845b2f4a16cb6769f6f26 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -49,8 +49,8 @@ reg = <0x40000000 0x40000000>; }; - soc@01c00000 { - codec: codec@01c22c00 { + soc@1c00000 { + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a23-codec"; reg = <0x01c22c00 0x400>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 22660919bd08ae8b9c43eff253a9180c16ab0202..50eb84fa246ac6c0608a8c9f2897ef3313581d0c 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -203,8 +203,8 @@ }; }; - soc@01c00000 { - tcon0: lcd-controller@01c0c000 { + soc@1c00000 { + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-a33-tcon"; reg = <0x01c0c000 0x1000>; interrupts = ; @@ -240,7 +240,7 @@ }; }; - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; @@ -250,7 +250,7 @@ reset-names = "ahb"; }; - dai: dai@01c22c00 { + dai: dai@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-i2s"; reg = <0x01c22c00 0x200>; @@ -263,7 +263,7 @@ status = "disabled"; }; - codec: codec@01c22e00 { + codec: codec@1c22e00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x400>; @@ -273,14 +273,14 @@ status = "disabled"; }; - ths: ths@01c25000 { + ths: ths@1c25000 { compatible = "allwinner,sun8i-a33-ths"; reg = <0x01c25000 0x100>; #thermal-sensor-cells = <0>; #io-channel-cells = <0>; }; - fe0: display-frontend@01e00000 { + fe0: display-frontend@1e00000 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = ; @@ -308,7 +308,7 @@ }; }; - be0: display-backend@01e60000 { + be0: display-backend@1e60000 { compatible = "allwinner,sun8i-a33-display-backend"; reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; reg-names = "be", "sat"; @@ -350,7 +350,7 @@ }; }; - drc0: drc@01e70000 { + drc0: drc@1e70000 { compatible = "allwinner,sun8i-a33-drc"; reg = <0x01e70000 0x10000>; interrupts = ; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 1f0d60afb25b695c44523c70d80677f1dd753ecb..5091cecbcd1eb0de85a11ccc268e2adcc76324be 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -43,7 +43,8 @@ /dts-v1/; #include "sun8i-a83t.dtsi" -#include "sunxi-common-regulators.dtsi" + +#include / { model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; @@ -56,6 +57,26 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reg_usb0_vbus: reg-usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + }; + + reg_usb1_vbus: reg-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + }; }; &ehci0 { @@ -65,7 +86,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ bus-width = <4>; cd-inverted; @@ -75,7 +96,8 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_emmc_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -86,16 +108,6 @@ status = "okay"; }; -®_usb0_vbus { - gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ - status = "okay"; -}; - -®_usb1_vbus { - gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - status = "okay"; -}; - &r_rsb { status = "okay"; @@ -104,6 +116,8 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + swin-supply = <®_dcdc1>; }; ac100: codec@e89 { @@ -131,6 +145,113 @@ }; }; +#include "axp81x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dram-pll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-sys"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo4 { + /* + * The PHY requires 20ms after all voltages are applied until core + * logic is ready and 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ephy"; +}; + +®_fldo1 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd12-hsic"; +}; + +®_fldo2 { + /* + * Despite the embedded CPUs core not being used in any way, + * this must remain on or the system will hang. + */ + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +®_sw { + regulator-name = "vcc-wifi"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 2bafd7e99ef7f2d0d83cfcd155240492059e5d91..c606af3dbfedf9351aed99313917b3f9e85e98c4 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun8i-a83t.dtsi" -#include "sunxi-common-regulators.dtsi" #include @@ -59,6 +58,27 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reg_usb1_vbus: reg-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* The WiFi low power clock must be 32768 Hz */ + assigned-clocks = <&ac100_rtc 1>; + assigned-clock-rates = <32768>; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -71,17 +91,35 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ cd-inverted; status = "okay"; }; +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_emmc_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -96,6 +134,10 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + fldoin-supply = <®_dcdc5>; + swin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; ac100: codec@e89 { @@ -123,17 +165,126 @@ }; }; -®_usb1_vbus { - gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ +#include "axp81x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dram-pll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + /* schematics says 3.1V but FEX file says 3.3V */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + /* + * This powers both the WiFi/BT module's main power, I/O supply, + * and external pull-ups on all the data lines. It should be set + * to the same voltage as the I/O supply (DCDC1 in this case) to + * avoid any leakage or mismatch. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pd"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; status = "okay"; }; -®_vcc3v0 { - status = "disabled"; +®_fldo1 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd12-hsic"; +}; + +®_fldo2 { + /* + * Despite the embedded CPUs core not being used in any way, + * this must remain on or the system will hang. + */ + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; -®_vcc5v0 { - status = "disabled"; +®_sw { + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; + regulator-name = "vcc-ephy"; }; &uart0 { diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 716a205c6dbbeca282efbe4498742634205ad8bd..7f0a3f6d0cf238ad5786ed8088d2b306e16ab63e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun8i-a83t.dtsi" -#include "sunxi-common-regulators.dtsi" #include @@ -95,6 +94,26 @@ refclk-frequency = <19200000>; }; + reg_usb1_vbus: reg-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */ + }; + + reg_usb2_vbus: reg-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb2-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "On-board SPDIF"; @@ -112,6 +131,17 @@ #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* The WiFi low power clock must be 32768 Hz */ + assigned-clocks = <&ac100_rtc 1>; + assigned-clock-rates = <32768>; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -127,17 +157,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ cd-inverted; status = "okay"; }; +&mmc1 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_sw>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_emmc_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -152,6 +191,9 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + swin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; }; ac100: codec@e89 { @@ -179,22 +221,143 @@ }; }; -®_usb1_vbus { - gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */ - status = "okay"; +#include "axp81x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dram-pll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; }; -®_usb2_vbus { - gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ +®_dcdc1 { + /* + * The schematics say this should be 3.3V, but the FEX file says + * it should be 3V. The latter makes sense, as the WiFi module's + * I/O is indirectly powered from DCDC1, through SW. It is rated + * at 2.98V maximum. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-sys"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "dp-pwr"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "ephy-io"; +}; + +®_dldo4 { + /* + * The PHY requires 20ms after all voltages are applied until core + * logic is ready and 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ephy"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; status = "okay"; }; -®_vcc3v0 { - status = "disabled"; +®_eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "dp-bridge-1"; +}; + +®_eldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "dp-bridge-2"; +}; + +®_fldo1 { + /* TODO should be handled by USB PHY */ + regulator-always-on; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd12-hsic"; +}; + +®_fldo2 { + /* + * Despite the embedded CPUs core not being used in any way, + * this must remain on or the system will hang. + */ + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; -®_vcc5v0 { - status = "disabled"; +®_sw { + regulator-name = "vcc-wifi-io"; }; &spdif { diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts new file mode 100644 index 0000000000000000000000000000000000000000..98715538932f10bd048b355b4f7bb5bfc183a7cd --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -0,0 +1,349 @@ +/* + * Copyright (C) 2017 Touchless Biometric Systems AG + * Tomas Novotny + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +#include + +/ { + model = "TBS A711 Tablet"; + compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vbat: reg-vbat { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + reg_vmain: reg-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vbat>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + + /* + * This is actually Bluetooth's clock, but we have to + * hook it up somewheere + */ + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + }; +}; + +/* + * An USB-2 hub is connected here, which also means we don't need to + * enable the OHCI controller. + */ +&ehci0 { + status = "okay"; +}; + +/* + * There's a modem connected here that needs to be initialised before + * being able to be enumerated. + */ +&ehci1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_dldo1>; + non-removable; + wakeup-source; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp81x: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + swin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; + +}; + +#include "axp81x.dtsi" + +®_aldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1.8"; +}; + +®_aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-name = "vdd-drampll"; +}; + +®_aldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + regulator-name = "vcc-io"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-name = "vdd-cpu-A"; +}; + +®_dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-name = "vdd-cpu-B"; +}; + +®_dcdc4 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <4200000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi-r"; +}; + +®_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dsi"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi-f"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-hsic"; +}; + +®_fldo2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-name = "vdd-cpus"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-vb"; + status = "okay"; +}; + +®_sw { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-name = "vcc-lcd"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +/* There's the BT part of the AP6210 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus_supply = <®_vmain>; + usb2_vbus_supply = <®_vmain>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index f996bd343e50ca156830b373048f3d51a0234116..19acae1b40898a77afbbedbe21cbcaecdffa0ab5 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -54,12 +54,6 @@ #address-cells = <1>; #size-cells = <1>; - aliases { - }; - - chosen { - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -218,6 +212,8 @@ resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -242,7 +238,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; @@ -348,6 +344,14 @@ bias-pull-up; }; + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", @@ -371,6 +375,16 @@ pins = "PF2", "PF4"; function = "uart0"; }; + + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; timer@1c20c00 { @@ -404,7 +418,7 @@ status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -415,6 +429,17 @@ status = "disabled"; }; + uart1: serial@1c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index b1502df7b50923a70d996847d1cd258d92cda73c..6713d0f2b3f4d3f3f62231bf6a74bf35828ce8b0 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -56,6 +56,8 @@ aliases { serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &xr819; }; @@ -102,6 +104,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index a337af1de32246b69807f4ee3b65e04e63231967..f2292deaa5908e845c68f73f2ed186b561b7d29a 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -52,6 +52,7 @@ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -63,7 +64,6 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -75,7 +75,6 @@ gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { label = "power"; @@ -97,7 +96,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_en_bpi_m2p>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; }; @@ -114,6 +112,24 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -171,23 +187,6 @@ status = "okay"; }; -&r_pio { - pwr_led_bpi_m2p: led_pins@0 { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_bpi_m2p: key_pins@0 { - pins = "PL3"; - function = "gpio_in"; - }; - - wifi_en_bpi_m2p: wifi_en_pin { - pins = "PL7"; - function = "gpio_out"; - }; -}; - ®_usb0_vbus { gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index 8ddd1b2cc0970f6bed86f7eb1e5eb433dd7358f0..0a8b79cf59549769dc1cb949ef65b3eccad1b7dd 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -45,6 +45,27 @@ / { model = "FriendlyArm NanoPi M1 Plus"; compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; + + aliases { + serial1 = &uart3; + ethernet1 = &sdio_wifi; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; }; &ehci1 { @@ -55,6 +76,50 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + &ohci1 { status = "okay"; }; @@ -62,3 +127,9 @@ &ohci2 { status = "okay"; }; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts index ec63d104b404b012b943ad76d256a857402afda1..3a2ccdb28afddf293e324210874fc2744497e3b9 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -55,6 +55,12 @@ status = "okay"; }; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + &ohci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 8d2cc6e9a03faff3cc71965493e5c54c1359e9f3..78f6c24952dd128249fd3010d212222832bb060a 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -46,3 +46,10 @@ model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index c6decee41a275e4970cf0c538386314f449f914f..7646e331bd2934f56dfb79e358cc9692cdfb2cbb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -81,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sw_r_npi>; - k1@0 { + k1 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -108,19 +108,19 @@ }; &pio { - leds_npi: led_pins@0 { + leds_npi: led_pins { pins = "PA10"; function = "gpio_out"; }; }; &r_pio { - leds_r_npi: led_pins@0 { + leds_r_npi: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_npi: key_pins@0 { + sw_r_npi: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 8ff71b1bb45b1c918d71e686ef4da4de7250306a..b20be95b49d5c686f011aaff5c2be90b448dd7e7 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -54,6 +54,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &rtl8189; }; @@ -117,6 +118,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -152,24 +160,24 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3", "PL4"; function = "gpio_in"; }; - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { + wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin { pins = "PL7"; function = "gpio_out"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 9b47a0def740c5ca43af9fd17503c3b2a28eb6c3..a70a1daf4e2c3e949a555eac59b00f9ec7a0d933 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -141,19 +141,19 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 5fea430e0eb1006120dd9b98dd904cdd7af14b67..82e5d28cd698c7b423f2ab2c2e5cc9da5f09dc0f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -97,6 +98,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; @@ -116,19 +124,19 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 8b93f5c781a70b565ed0012d2c29b35f04987dcd..a10281b455f50ccad1f26087ae14884600c19c90 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,6 +53,11 @@ }; }; +&emac { + /* LEDs changed to active high on the plus */ + /delete-property/ allwinner,leds-active-low; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 1a044b17d6c61e5cc391782c5e06aa3df7322548..d22546df1b822b6aa195dba75c5874d4c1db5c01 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -113,6 +114,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -146,19 +154,19 @@ }; &pio { - leds_opc: led_pins@0 { + leds_opc: led_pins { pins = "PA15"; function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { + leds_r_opc: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_opc: key_pins@0 { + sw_r_opc: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 828ae7a526d924955e666a4ad110f565aa931bf5..cbc499b04de44c4c16563e3d8c9828b683944686 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -47,6 +47,10 @@ model = "Xunlong Orange Pi Plus / Plus 2"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + aliases { + ethernet0 = &emac; + }; + reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; regulator-name = "gmac-3v3"; @@ -74,6 +78,24 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -92,7 +114,7 @@ }; &pio { - usb3_vbus_pin_a: usb3_vbus_pin@0 { + usb3_vbus_pin_a: usb3_vbus_pin { pins = "PG11"; function = "gpio_out"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 97920b12a944526f3c5dd15de7435f5e30195a3c..6dbf7b2e0c13c44f06e7970c006f3357f0d0493e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -61,3 +61,19 @@ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ }; }; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts new file mode 100644 index 0000000000000000000000000000000000000000..8c5efe2a9881c44335d4a97da7e41ebe303114f0 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2017 Chen-Yu Tsai + * Copyright (C) 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include + +/ { + model = "Banana Pi BPI-M2-Ultra"; + compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr-led { + label = "bananapi:red:pwr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + user-led-green { + label = "bananapi:green:user"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + }; + + user-led-blue { + label = "bananapi:blue:user"; + gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..173dcc1652d2be98db9a34b4c068c22f307c9d59 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -0,0 +1,473 @@ +/* + * Copyright 2017 Chen-Yu Tsai + * Copyright 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nmi_intc: interrupt-controller@1c00030 { + compatible = "allwinner,sun7i-a20-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c00030 0x0c>; + interrupts = ; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun8i-r40-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,sun8i-r40-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@1c11000 { + compatible = "allwinner,sun8i-r40-emmc", + "allwinner,sun50i-a64-emmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + pinctrl-0 = <&mmc2_pins>; + pinctrl-names = "default"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc3: mmc@1c12000 { + compatible = "allwinner,sun8i-r40-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC3>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,sun8i-r40-usb-phy"; + reg = <0x01c13400 0x14>, + <0x01c14800 0x4>, + <0x01c19800 0x4>, + <0x01c1c800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci1: usb@1c19000 { + compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; + reg = <0x01c19000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI1>; + resets = <&ccu RST_BUS_EHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@1c19400 { + compatible = "allwinner,sun8i-r40-ohci", "generic-ohci"; + reg = <0x01c19400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci2: usb@1c1c000 { + compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI2>; + resets = <&ccu RST_BUS_EHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@1c1c400 { + compatible = "allwinner,sun8i-r40-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-r40-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,sun8i-r40-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + i2c0_pins: i2c0-pins { + pins = "PB0", "PB1"; + function = "i2c0"; + }; + + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc1_pg_pins: mmc1-pg-pins { + pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC5", "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", "PC14", + "PC15", "PC24"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + uart0_pb_pins: uart0-pb-pins { + pins = "PB22", "PB23"; + function = "uart0"; + }; + }; + + wdt: watchdog@1c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@1c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@1c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + uart5: serial@1c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; + status = "disabled"; + }; + + uart6: serial@1c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART6>; + resets = <&ccu RST_BUS_UART6>; + status = "disabled"; + }; + + uart7: serial@1c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART7>; + resets = <&ccu RST_BUS_UART7>; + status = "disabled"; + }; + + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@1c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@1c2b800 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@1c2c000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2c000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 3a06dc5b3746719b18a7fbbf579aaff668493060..443b083c6adc9a1c9f605554fcada283e8d90872 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -178,7 +178,7 @@ }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, @@ -197,7 +197,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, @@ -218,7 +218,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, @@ -237,7 +237,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; @@ -250,7 +250,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun8i-v3s-usb-phy"; reg = <0x01c19400 0x2c>, <0x01c1a800 0x4>; @@ -264,7 +264,7 @@ #phy-cells = <1>; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -273,14 +273,14 @@ #reset-cells = <1>; }; - rtc: rtc@01c20400 { + rtc: rtc@1c20400 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01c20400 0x54>; interrupts = , ; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-v3s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = , @@ -324,7 +324,7 @@ }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -332,7 +332,7 @@ clocks = <&osc24M>; }; - wdt0: watchdog@01c20ca0 { + wdt0: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; @@ -345,7 +345,7 @@ status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -356,7 +356,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -367,7 +367,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -378,7 +378,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -391,7 +391,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -416,7 +416,7 @@ #size-cells = <0>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts new file mode 100644 index 0000000000000000000000000000000000000000..fe16fc0eb51843a152f9afa12f1546cc6d7d7eb8 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2017 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include + +/ { + model = "Banana Pi M2 Berry"; + compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr-led { + label = "bananapi:red:pwr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + user-led { + label = "bananapi:green:user"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + }; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 3741ac71c3d62588b507199b425a44987df52397..4024639aa00570954c095516ca8e880c25d9a508 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard4>; green { label = "cubieboard4:green:usr"; @@ -76,7 +74,7 @@ }; }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; @@ -87,7 +85,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ @@ -97,7 +95,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>; + pinctrl-0 = <&mmc1_pins>; vmmc-supply = <®_dldo1>; vqmmc-supply = <®_cldo3>; mmc-pwrseq = <&wifi_pwrseq>; @@ -130,30 +128,10 @@ clocks = <&ac100_rtc 0>; }; -&pio { - led_pins_cubieboard4: led-pins@0 { - pins = "PH6", "PH17"; - function = "gpio_out"; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - pins = "PH18"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_ir { status = "okay"; }; -&r_pio { - wifi_en_pin_cubieboard4: wifi_en_pin@0 { - pins = "PL2"; - function = "gpio_out"; - }; -}; - &r_rsb { status = "okay"; @@ -427,6 +405,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 85f1ad6703109ff736854532b7242d32281c000a..a9b807be99a02598c59811e35d32cec1cddf5322 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -62,11 +62,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>; /* The LED names match those found on the board */ - led2 { label = "optimus:led2:usr"; gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; @@ -86,8 +83,6 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_optimus>; - regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -97,15 +92,13 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_optimus>; - regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ }; - wifi_pwrseq: wifi_pwrseq { + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; clock-names = "ext_clock"; @@ -129,7 +122,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ @@ -139,7 +132,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>; + pinctrl-0 = <&mmc1_pins>; vmmc-supply = <®_dldo1>; vqmmc-supply = <®_cldo3>; mmc-pwrseq = <&wifi_pwrseq>; @@ -180,45 +173,10 @@ clocks = <&ac100_rtc 0>; }; -&pio { - led_pins_optimus: led-pins@0 { - pins = "PH0", "PH1"; - function = "gpio_out"; - }; - - mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - pins = "PH18"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_optimus: usb1_vbus_pin@1 { - pins = "PH4"; - function = "gpio_out"; - }; - - usb3_vbus_pin_optimus: usb3_vbus_pin@1 { - pins = "PH5"; - function = "gpio_out"; - }; -}; - &r_ir { status = "okay"; }; -&r_pio { - led_r_pins_optimus: led-pins@1 { - pins = "PM15"; - function = "gpio_out"; - }; - - wifi_en_pin_optimus: wifi_en_pin@0 { - pins = "PL2"; - function = "gpio_out"; - }; -}; - &r_rsb { status = "okay"; @@ -492,7 +450,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 759a72317eb8f0b2c98156deadaf6773f4c9cb7e..90eac0b2a1938aac9a3935c88dbed007678e6425 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton64.dtsi" - #include #include @@ -54,6 +52,8 @@ #include / { + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; cpus { @@ -109,11 +109,6 @@ }; }; - memory { - /* 8GB max. with LPAE */ - reg = <0 0x20000000 0x02 0>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = , @@ -144,7 +139,7 @@ * would also throw all the PLL clock rates off, or just the * downstream clocks in the PRCM. */ - osc24M: osc24M_clk { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -156,7 +151,7 @@ * AC100 codec/RTC chip. This serves as a placeholder for * board dts files to specify the source. */ - osc32k: osc32k_clk { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; @@ -164,7 +159,7 @@ clock-output-names = "osc32k"; }; - cpus_clk: clk@08001410 { + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; #clock-cells = <0>; @@ -174,7 +169,7 @@ clock-output-names = "cpus"; }; - ahbs: ahbs_clk { + ahbs: clk-ahbs { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -183,7 +178,7 @@ clock-output-names = "ahbs"; }; - apbs: clk@0800141c { + apbs: clk@800141c { compatible = "allwinner,sun8i-a23-apb0-clk"; reg = <0x0800141c 0x4>; #clock-cells = <0>; @@ -191,7 +186,7 @@ clock-output-names = "apbs"; }; - apbs_gates: clk@08001428 { + apbs_gates: clk@8001428 { compatible = "allwinner,sun9i-a80-apbs-gates-clk"; reg = <0x08001428 0x4>; #clock-cells = <1>; @@ -212,7 +207,7 @@ "apbs_i2s1", "apbs_twd"; }; - r_1wire_clk: clk@08001450 { + r_1wire_clk: clk@8001450 { reg = <0x08001450 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -220,7 +215,7 @@ clock-output-names = "r_1wire"; }; - r_ir_clk: clk@08001454 { + r_ir_clk: clk@8001454 { reg = <0x08001454 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -239,7 +234,7 @@ */ ranges = <0 0 0 0x20000000>; - ehci0: usb@00a00000 { + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; interrupts = ; @@ -250,7 +245,7 @@ status = "disabled"; }; - ohci0: usb@00a00400 { + ohci0: usb@a00400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a00400 0x100>; interrupts = ; @@ -262,7 +257,7 @@ status = "disabled"; }; - usbphy1: phy@00a00800 { + usbphy1: phy@a00800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a00800 0x4>; clocks = <&usb_clocks CLK_USB0_PHY>; @@ -273,7 +268,7 @@ #phy-cells = <0>; }; - ehci1: usb@00a01000 { + ehci1: usb@a01000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a01000 0x100>; interrupts = ; @@ -284,7 +279,7 @@ status = "disabled"; }; - usbphy2: phy@00a01800 { + usbphy2: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; clocks = <&usb_clocks CLK_USB1_HSIC>, @@ -303,7 +298,7 @@ phy_type = "hsic"; }; - ehci2: usb@00a02000 { + ehci2: usb@a02000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a02000 0x100>; interrupts = ; @@ -314,7 +309,7 @@ status = "disabled"; }; - ohci2: usb@00a02400 { + ohci2: usb@a02400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a02400 0x100>; interrupts = ; @@ -326,7 +321,7 @@ status = "disabled"; }; - usbphy3: phy@00a02800 { + usbphy3: phy@a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; clocks = <&usb_clocks CLK_USB2_HSIC>, @@ -343,7 +338,7 @@ #phy-cells = <0>; }; - usb_clocks: clock@00a08000 { + usb_clocks: clock@a08000 { compatible = "allwinner,sun9i-a80-usb-clks"; reg = <0x00a08000 0x8>; clocks = <&ccu CLK_BUS_USB>, <&osc24M>; @@ -352,7 +347,7 @@ #reset-cells = <1>; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, @@ -367,7 +362,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, @@ -382,7 +377,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, @@ -397,7 +392,7 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, @@ -412,7 +407,7 @@ #size-cells = <0>; }; - mmc_config_clk: clk@01c13000 { + mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ccu CLK_BUS_MMC>; @@ -425,7 +420,7 @@ "mmc2_config", "mmc3_config"; }; - gic: interrupt-controller@01c41000 { + gic: interrupt-controller@1c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, <0x01c42000 0x2000>, @@ -436,7 +431,7 @@ interrupts = ; }; - de_clocks: clock@03000000 { + de_clocks: clock@3000000 { compatible = "allwinner,sun9i-a80-de-clks"; reg = <0x03000000 0x30>; clocks = <&ccu CLK_DE>, @@ -450,7 +445,7 @@ #reset-cells = <1>; }; - ccu: clock@06000000 { + ccu: clock@6000000 { compatible = "allwinner,sun9i-a80-ccu"; reg = <0x06000000 0x800>; clocks = <&osc24M>, <&osc32k>; @@ -459,7 +454,7 @@ #reset-cells = <1>; }; - timer@06000c00 { + timer@6000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; interrupts = , @@ -472,13 +467,13 @@ clocks = <&osc24M>; }; - wdt: watchdog@06000ca0 { + wdt: watchdog@6000ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = ; }; - pio: pinctrl@06000800 { + pio: pinctrl@6000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; interrupts = , @@ -494,12 +489,12 @@ #size-cells = <0>; #gpio-cells = <3>; - i2c3_pins_a: i2c3@0 { + i2c3_pins: i2c3-pins { pins = "PG10", "PG11"; function = "i2c3"; }; - mmc0_pins: mmc0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1" ,"PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -507,7 +502,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1" ,"PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -515,7 +510,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -525,18 +520,18 @@ bias-pull-up; }; - uart0_pins_a: uart0@0 { + uart0_ph_pins: uart0-ph-pins { pins = "PH12", "PH13"; function = "uart0"; }; - uart4_pins_a: uart4@0 { + uart4_pins: uart4-pins { pins = "PG12", "PG13", "PG14", "PG15"; function = "uart4"; }; }; - uart0: serial@07000000 { + uart0: serial@7000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; interrupts = ; @@ -547,7 +542,7 @@ status = "disabled"; }; - uart1: serial@07000400 { + uart1: serial@7000400 { compatible = "snps,dw-apb-uart"; reg = <0x07000400 0x400>; interrupts = ; @@ -558,7 +553,7 @@ status = "disabled"; }; - uart2: serial@07000800 { + uart2: serial@7000800 { compatible = "snps,dw-apb-uart"; reg = <0x07000800 0x400>; interrupts = ; @@ -569,7 +564,7 @@ status = "disabled"; }; - uart3: serial@07000c00 { + uart3: serial@7000c00 { compatible = "snps,dw-apb-uart"; reg = <0x07000c00 0x400>; interrupts = ; @@ -580,7 +575,7 @@ status = "disabled"; }; - uart4: serial@07001000 { + uart4: serial@7001000 { compatible = "snps,dw-apb-uart"; reg = <0x07001000 0x400>; interrupts = ; @@ -591,7 +586,7 @@ status = "disabled"; }; - uart5: serial@07001400 { + uart5: serial@7001400 { compatible = "snps,dw-apb-uart"; reg = <0x07001400 0x400>; interrupts = ; @@ -602,7 +597,7 @@ status = "disabled"; }; - i2c0: i2c@07002800 { + i2c0: i2c@7002800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; interrupts = ; @@ -613,7 +608,7 @@ #size-cells = <0>; }; - i2c1: i2c@07002c00 { + i2c1: i2c@7002c00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; interrupts = ; @@ -624,7 +619,7 @@ #size-cells = <0>; }; - i2c2: i2c@07003000 { + i2c2: i2c@7003000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; interrupts = ; @@ -635,7 +630,7 @@ #size-cells = <0>; }; - i2c3: i2c@07003400 { + i2c3: i2c@7003400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; interrupts = ; @@ -646,7 +641,7 @@ #size-cells = <0>; }; - i2c4: i2c@07003800 { + i2c4: i2c@7003800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; interrupts = ; @@ -657,19 +652,19 @@ #size-cells = <0>; }; - r_wdt: watchdog@08001000 { + r_wdt: watchdog@8001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = ; }; - apbs_rst: reset@080014b0 { + apbs_rst: reset@80014b0 { reg = <0x080014b0 0x4>; compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; - nmi_intc: interrupt-controller@080015a0 { + nmi_intc: interrupt-controller@80015a0 { compatible = "allwinner,sun9i-a80-nmi"; interrupt-controller; #interrupt-cells = <2>; @@ -677,7 +672,7 @@ interrupts = ; }; - r_ir: ir@08002000 { + r_ir: ir@8002000 { compatible = "allwinner,sun5i-a13-ir"; interrupts = ; pinctrl-names = "default"; @@ -689,7 +684,7 @@ status = "disabled"; }; - r_uart: serial@08002800 { + r_uart: serial@8002800 { compatible = "snps,dw-apb-uart"; reg = <0x08002800 0x400>; interrupts = ; @@ -700,7 +695,7 @@ status = "disabled"; }; - r_pio: pinctrl@08002c00 { + r_pio: pinctrl@8002c00 { compatible = "allwinner,sun9i-a80-r-pinctrl"; reg = <0x08002c00 0x400>; interrupts = , @@ -713,12 +708,12 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - r_ir_pins: r_ir { + r_ir_pins: r-ir-pins { pins = "PL6"; function = "s_cir_rx"; }; - r_rsb_pins: r_rsb { + r_rsb_pins: r-rsb-pins { pins = "PN0", "PN1"; function = "s_rsb"; drive-strength = <20>; @@ -726,7 +721,7 @@ }; }; - r_rsb: i2c@08003400 { + r_rsb: i2c@8003400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x08003400 0x400>; interrupts = ; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 11240a8313c266a33ec7ad1233aca2a976d4af3f..8d40c00d64bb39a893d2f74c3d859ea42db59589 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -91,7 +91,7 @@ reg = <0x01c00000 0x1000>; }; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = ; @@ -100,7 +100,7 @@ #dma-cells = <1>; }; - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c0f000 0x1000>; resets = <&ccu RST_BUS_MMC0>; @@ -111,7 +111,7 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c10000 0x1000>; resets = <&ccu RST_BUS_MMC1>; @@ -122,7 +122,7 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c11000 0x1000>; resets = <&ccu RST_BUS_MMC2>; @@ -133,7 +133,7 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; clocks = <&ccu CLK_BUS_OTG>; @@ -146,7 +146,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun8i-h3-usb-phy"; reg = <0x01c19400 0x2c>, <0x01c1a800 0x4>, @@ -178,7 +178,7 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; @@ -187,7 +187,7 @@ status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; @@ -197,7 +197,7 @@ status = "disabled"; }; - ehci1: usb@01c1b000 { + ehci1: usb@1c1b000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = ; @@ -208,7 +208,7 @@ status = "disabled"; }; - ohci1: usb@01c1b400 { + ohci1: usb@1c1b400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = ; @@ -220,7 +220,7 @@ status = "disabled"; }; - ehci2: usb@01c1c000 { + ehci2: usb@1c1c000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = ; @@ -231,7 +231,7 @@ status = "disabled"; }; - ohci2: usb@01c1c400 { + ohci2: usb@1c1c400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; @@ -243,7 +243,7 @@ status = "disabled"; }; - ehci3: usb@01c1d000 { + ehci3: usb@1c1d000 { compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1d000 0x100>; interrupts = ; @@ -254,7 +254,7 @@ status = "disabled"; }; - ohci3: usb@01c1d400 { + ohci3: usb@1c1d400 { compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1d400 0x100>; interrupts = ; @@ -266,7 +266,7 @@ status = "disabled"; }; - ccu: clock@01c20000 { + ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -275,7 +275,7 @@ #reset-cells = <1>; }; - pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20800 0x400>; interrupts = , @@ -310,7 +310,7 @@ function = "i2c2"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins_a: mmc0 { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -318,13 +318,13 @@ bias-pull-up; }; - mmc0_cd_pin: mmc0_cd_pin@0 { + mmc0_cd_pin: mmc0_cd_pin { pins = "PF6"; function = "gpio_in"; bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins_a: mmc1 { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -342,7 +342,7 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pins_a: spdif { pins = "PA17"; function = "spdif"; }; @@ -357,7 +357,7 @@ function = "spi1"; }; - uart0_pins_a: uart0@0 { + uart0_pins_a: uart0 { pins = "PA4", "PA5"; function = "uart0"; }; @@ -381,9 +381,14 @@ pins = "PA13", "PA14"; function = "uart3"; }; + + uart3_rts_cts_pins: uart3_rts_cts { + pins = "PA15", "PA16"; + function = "uart3"; + }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -391,7 +396,56 @@ clocks = <&osc24M>; }; - spi0: spi@01c68000 { + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + /* Only one MDIO is usable at the time */ + internal_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + + external_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; interrupts = ; @@ -407,7 +461,7 @@ #size-cells = <0>; }; - spi1: spi@01c69000 { + spi1: spi@1c69000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c69000 0x1000>; interrupts = ; @@ -423,13 +477,13 @@ #size-cells = <0>; }; - wdt0: watchdog@01c20ca0 { + wdt0: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; }; - spdif: spdif@01c21000 { + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-spdif"; reg = <0x01c21000 0x400>; @@ -442,7 +496,7 @@ status = "disabled"; }; - pwm: pwm@01c21400 { + pwm: pwm@1c21400 { compatible = "allwinner,sun8i-h3-pwm"; reg = <0x01c21400 0x8>; clocks = <&osc24M>; @@ -450,7 +504,33 @@ status = "disabled"; }; - codec: codec@01c22c00 { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + resets = <&ccu RST_BUS_I2S0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + resets = <&ccu RST_BUS_I2S1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-codec"; reg = <0x01c22c00 0x400>; @@ -464,7 +544,7 @@ status = "disabled"; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -477,7 +557,7 @@ status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; @@ -490,7 +570,7 @@ status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; @@ -503,7 +583,7 @@ status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; @@ -516,7 +596,7 @@ status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; @@ -529,7 +609,7 @@ #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; @@ -542,9 +622,9 @@ #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; + reg = <0x01c2b400 0x400>; interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; @@ -555,7 +635,7 @@ #size-cells = <0>; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -566,7 +646,7 @@ interrupts = ; }; - rtc: rtc@01f00000 { + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , @@ -583,12 +663,12 @@ #reset-cells = <1>; }; - codec_analog: codec-analog@01f015c0 { + codec_analog: codec-analog@1f015c0 { compatible = "allwinner,sun8i-h3-codec-analog"; reg = <0x01f015c0 0x4>; }; - ir: ir@01f02000 { + ir: ir@1f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; @@ -598,7 +678,7 @@ status = "disabled"; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; @@ -609,7 +689,7 @@ interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir@0 { + ir_pins_a: ir { pins = "PL11"; function = "s_cir_rx"; }; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi index 2565d5137a17e300c4f9274277303d5626e761f2..ddf4e722ea93775ee7ac240a1442dc9432880e9e 100644 --- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -65,8 +65,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -75,8 +73,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index 12ab6e0c033149239c7476c8ea60262c697837d5..0ec1b0a317b4c4631d4cfe5d9d451e9d16c697de 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -160,7 +160,7 @@ #address-cells = <1>; #size-cells = <1>; - irq0: irq0@000 { + irq0: irq0@0 { reg = <0x000 0x100>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index e8e777b8ef1b33658f773b36fe0b064b15121d3c..d112f85e66ed530b14f66ed6d0c50f107d4f2a65 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -68,6 +68,10 @@ }; }; + cec@70015000 { + status = "okay"; + }; + gpu@0,57000000 { /* * Node left disabled on purpose - the bootloader will enable diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index a7e43dcbf74443738749512081edde1ff4738d14..174092bfac908ca0c359f756d165c26b8cef6ff1 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -125,7 +125,7 @@ nvidia,head = <1>; }; - hdmi@54280000 { + hdmi: hdmi@54280000 { compatible = "nvidia,tegra124-hdmi"; reg = <0x0 0x54280000 0x0 0x00040000>; interrupts = ; @@ -853,6 +853,16 @@ status = "disabled"; }; + cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; + status = "disabled"; + hdmi-phandle = <&hdmi>; + }; + soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra124-soctherm"; reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index b3aaab354f3e0e8ff842db3549f865e7c1c60e10..0056852c4fb0a20a6396a7de2d1b45db1776c72c 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -38,7 +38,7 @@ }; ðsc { - interrupts = <0 49 4>; + interrupts = <1 8>; }; &serial0 { @@ -53,6 +53,14 @@ status = "okay"; }; +&gpio { + xirq1 { + gpio-hog; + gpios = <121 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 93586faf950f1bff750fe9821e4b7d1c60766fc7..01fc3e16e2bd5adae80f8a42d17a6b4d039c85d7 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -37,7 +37,7 @@ clock-frequency = <24576000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -71,6 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -81,6 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -91,6 +93,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -101,6 +104,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <136>; + socionext,interrupt-ranges = <0 48 13>, <14 62 2>; }; i2c0: i2c@58400000 { @@ -113,6 +131,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -126,6 +145,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -139,6 +159,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <400000>; }; @@ -152,6 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -305,6 +327,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 2188d114d79b06c9b9b1bfde5d8cee1bc82e02df..0e510a725976e38cf928d2edba5b46ac7a937fff 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -40,7 +40,7 @@ }; ðsc { - interrupts = <0 52 4>; + interrupts = <4 8>; }; &serial0 { @@ -55,6 +55,14 @@ status = "okay"; }; +&gpio { + xirq4 { + gpio-hog; + gpios = <124 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index be82cddc407245b82cfde6b02cbcc970576e6e0d..de481c372467a75ba49b7631ba95bed22fa95190 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -8,117 +8,117 @@ */ &pinctrl { - pinctrl_aout: aout_grp { + pinctrl_aout: aout { groups = "aout"; function = "aout"; }; - pinctrl_emmc: emmc_grp { + pinctrl_emmc: emmc { groups = "emmc", "emmc_dat8"; function = "emmc"; }; - pinctrl_ether_mii: ether_mii_grp { + pinctrl_ether_mii: ether-mii { groups = "ether_mii"; function = "ether_mii"; }; - pinctrl_ether_rgmii: ether_rgmii_grp { + pinctrl_ether_rgmii: ether-rgmii { groups = "ether_rgmii"; function = "ether_rgmii"; }; - pinctrl_ether_rmii: ether_rmii_grp { + pinctrl_ether_rmii: ether-rmii { groups = "ether_rmii"; function = "ether_rmii"; }; - pinctrl_i2c0: i2c0_grp { + pinctrl_i2c0: i2c0 { groups = "i2c0"; function = "i2c0"; }; - pinctrl_i2c1: i2c1_grp { + pinctrl_i2c1: i2c1 { groups = "i2c1"; function = "i2c1"; }; - pinctrl_i2c2: i2c2_grp { + pinctrl_i2c2: i2c2 { groups = "i2c2"; function = "i2c2"; }; - pinctrl_i2c3: i2c3_grp { + pinctrl_i2c3: i2c3 { groups = "i2c3"; function = "i2c3"; }; - pinctrl_i2c4: i2c4_grp { + pinctrl_i2c4: i2c4 { groups = "i2c4"; function = "i2c4"; }; - pinctrl_nand: nand_grp { + pinctrl_nand: nand { groups = "nand"; function = "nand"; }; - pinctrl_nand2cs: nand2cs_grp { + pinctrl_nand2cs: nand2cs { groups = "nand", "nand_cs1"; function = "nand"; }; - pinctrl_sd: sd_grp { + pinctrl_sd: sd { groups = "sd"; function = "sd"; }; - pinctrl_sd1: sd1_grp { + pinctrl_sd1: sd1 { groups = "sd1"; function = "sd1"; }; - pinctrl_system_bus: system_bus_grp { + pinctrl_system_bus: system-bus { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; }; - pinctrl_uart0: uart0_grp { + pinctrl_uart0: uart0 { groups = "uart0"; function = "uart0"; }; - pinctrl_uart1: uart1_grp { + pinctrl_uart1: uart1 { groups = "uart1"; function = "uart1"; }; - pinctrl_uart2: uart2_grp { + pinctrl_uart2: uart2 { groups = "uart2"; function = "uart2"; }; - pinctrl_uart3: uart3_grp { + pinctrl_uart3: uart3 { groups = "uart3"; function = "uart3"; }; - pinctrl_usb0: usb0_grp { + pinctrl_usb0: usb0 { groups = "usb0"; function = "usb0"; }; - pinctrl_usb1: usb1_grp { + pinctrl_usb1: usb1 { groups = "usb1"; function = "usb1"; }; - pinctrl_usb2: usb2_grp { + pinctrl_usb2: usb2 { groups = "usb2"; function = "usb2"; }; - pinctrl_usb3: usb3_grp { + pinctrl_usb3: usb3 { groups = "usb3"; function = "usb3"; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 903df6348e77db51d2bcc86d2aa1d32a0cf3dece..be99467ac6bb9b0cc4e39f1bbb32d79d046cf5f5 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -40,7 +40,7 @@ }; ðsc { - interrupts = <0 50 4>; + interrupts = <2 8>; }; &serial0 { @@ -55,6 +55,14 @@ status = "okay"; }; +&gpio { + xirq2 { + gpio-hog; + gpios = <122 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 2a9bd7f9f5db3d43b1896162048e95faea18f299..7955c3a49e659695f1526b024192c8c13a31a138 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -45,7 +45,7 @@ clock-frequency = <25000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -79,6 +79,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -89,6 +90,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -99,6 +101,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -109,6 +112,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>; }; i2c0: i2c@58780000 { @@ -121,6 +139,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -134,6 +153,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -147,6 +167,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <100000>; }; @@ -160,6 +181,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -173,6 +195,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -184,6 +207,7 @@ #size-cells = <0>; interrupts = <0 26 4>; clocks = <&peri_clk 10>; + resets = <&peri_rst 10>; clock-frequency = <400000>; }; @@ -324,6 +348,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index b026bcd42a069351b1786959be0af090eaef21d3..6589b8a2c65c7766d850e1625ba201065aa9f760 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -37,7 +37,7 @@ }; }; - cpu_opp: opp_table { + cpu_opp: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -119,7 +119,7 @@ clock-frequency = <20000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -166,6 +166,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -176,6 +177,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -186,6 +188,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -196,6 +199,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>; }; i2c0: i2c@58780000 { @@ -208,6 +226,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -221,6 +240,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -234,6 +254,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <100000>; }; @@ -247,6 +268,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -260,6 +282,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -271,6 +294,7 @@ #size-cells = <0>; interrupts = <0 26 4>; clocks = <&peri_clk 10>; + resets = <&peri_rst 10>; clock-frequency = <400000>; }; @@ -385,6 +409,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 90b020c950837d5d0c9d2a43d74d4a2c208b7463..d82d6d8721319a462086cfb5d2330c5e9e12118d 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -7,6 +7,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include + / { compatible = "socionext,uniphier-pxs2"; #address-cells = <1>; @@ -16,7 +18,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; @@ -24,9 +26,10 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; @@ -36,7 +39,7 @@ operating-points-v2 = <&cpu_opp>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; @@ -46,7 +49,7 @@ operating-points-v2 = <&cpu_opp>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; @@ -57,7 +60,7 @@ }; }; - cpu_opp: opp_table { + cpu_opp: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -107,13 +110,42 @@ clock-frequency = <25000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu-crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_alert>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -141,6 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -151,6 +184,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -161,6 +195,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -171,6 +206,24 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 96 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1"; + ngpios = <232>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, + <21 217 3>; }; i2c0: i2c@58780000 { @@ -183,6 +236,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -196,6 +250,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -209,6 +264,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <100000>; }; @@ -222,6 +278,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -233,6 +290,7 @@ #size-cells = <0>; interrupts = <0 45 4>; clocks = <&peri_clk 8>; + resets = <&peri_rst 8>; clock-frequency = <400000>; }; @@ -244,6 +302,7 @@ #size-cells = <0>; interrupts = <0 25 4>; clocks = <&peri_clk 9>; + resets = <&peri_rst 9>; clock-frequency = <400000>; }; @@ -255,6 +314,7 @@ #size-cells = <0>; interrupts = <0 26 4>; clocks = <&peri_clk 10>; + resets = <&peri_rst 10>; clock-frequency = <400000>; }; @@ -358,6 +418,13 @@ compatible = "socionext,uniphier-pxs2-reset"; #reset-cells = <1>; }; + + pvtctl: pvtctl { + compatible = "socionext,uniphier-pxs2-thermal"; + interrupts = <0 3 4>; + #thermal-sensor-cells = <0>; + socionext,tmod-calibration = <0x0f86 0x6844>; + }; }; nand: nand@68000000 { @@ -369,6 +436,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 5accd3cc76e4aaee7471f0ce7542bfc7eb6d1ac9..1c0e7077a5609920323b356712b59cd6e51c75fb 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -38,7 +38,7 @@ }; ðsc { - interrupts = <0 48 4>; + interrupts = <0 8>; }; &serial0 { @@ -53,6 +53,14 @@ status = "okay"; }; +&gpio { + xirq0 { + gpio-hog; + gpios = <120 0>; + input; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index ebd0c3f63e7fb6bf05d8e775367e6572f8931318..71885366cd238339f1ddc03ae3010c4052806ce8 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -37,7 +37,7 @@ clock-frequency = <25000000>; }; - arm_timer_clk: arm_timer_clk { + arm_timer_clk: arm-timer { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -71,6 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&peri_clk 0>; + resets = <&peri_rst 0>; }; serial1: serial@54006900 { @@ -81,6 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&peri_clk 1>; + resets = <&peri_rst 1>; }; serial2: serial@54006a00 { @@ -91,6 +93,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; clocks = <&peri_clk 2>; + resets = <&peri_rst 2>; }; serial3: serial@54006b00 { @@ -101,6 +104,25 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; clocks = <&peri_clk 3>; + resets = <&peri_rst 3>; + }; + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 104 0 0>, + <&pinctrl 112 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2"; + ngpios = <136>; + socionext,interrupt-ranges = <0 48 13>, <14 62 2>; }; i2c0: i2c@58400000 { @@ -113,6 +135,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; clocks = <&peri_clk 4>; + resets = <&peri_rst 4>; clock-frequency = <100000>; }; @@ -126,6 +149,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; clocks = <&peri_clk 5>; + resets = <&peri_rst 5>; clock-frequency = <100000>; }; @@ -139,6 +163,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; + resets = <&peri_rst 6>; clock-frequency = <400000>; }; @@ -152,6 +177,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; clocks = <&peri_clk 7>; + resets = <&peri_rst 7>; clock-frequency = <100000>; }; @@ -305,6 +331,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; clocks = <&sys_clk 2>; + resets = <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index 6c825f192e659354be7f066535ed08c28450961f..e4e7e1bb91720ccc10aa564365bfd1f164433921 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -11,11 +11,12 @@ status = "okay"; ranges = <1 0x00000000 0x42000000 0x02000000>; - support_card: support_card@1,1f00000 { + support_card: support-card@1,1f00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 1 0x01f00000 0x00100000>; + interrupt-parent = <&gpio>; ethsc: ethernet@0 { compatible = "smsc,lan9118", "smsc,lan9115"; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 482381c1c9622832d2ab438c2f38e3d5770fd136..7b1125be99c467221f442122073afb1b15ac34e8 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -128,7 +128,7 @@ }; }; - usb0: ohci@00a00000 { + usb0: ohci@a00000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi index 088c2c3685ab7bf3d65367c0662d226980cbb44e..81c3fe0465d95cb645d8e26177c6858db1dc52c5 100644 --- a/arch/arm/boot/dts/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -20,8 +20,8 @@ }; i2c-gpio-0 { - rv3029c2@56 { - compatible = "rv3029c2"; + rtc@56 { + compatible = "microcrystal,rv3029"; reg = <0x56>; }; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 53e3b8b250c6baa9ad81aaff3cfc6bb3cd67d10e..6f787e67bd2eacfb52944e6d47a39e46595e7b65 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -198,7 +198,7 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - codec: sgtl5000@0a { + codec: sgtl5000@a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; reg = <0x0a>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index db3b408ea55afee6a96530585fbda8a3c6f3fad2..02a6227c717ca6ce0bd515804887b74778a06ded 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -359,7 +359,7 @@ }; &i2c1 { - at24mac602@00 { + at24mac602@0 { compatible = "atmel,24c02"; reg = <0x50>; read-only; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index 752d28e0f9b0181b5dd2d52cbb02e55b9ec9e63f..8a74efdb636062e28e309e130f557e5bc582d65f 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -38,7 +38,7 @@ reg = <0x00400000 0x1000>; }; - intc: interrupt-controller@00801000 { + intc: interrupt-controller@801000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; #address-cells = <1>; @@ -48,7 +48,7 @@ <0x00800100 0x100>; }; - global_timer: timer@008000200 { + global_timer: timer@8000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x00800200 0x20>; interrupts = ; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 34e8277fce0d36a875cccb1278a9c016236b53d0..70a5de76b7db36a858a48cb82c2fd1e7fd94e95e 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -152,7 +152,7 @@ #size-cells = <0>; reg = <2>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 7ebc8c5ae39dce63ce99add3fea8e4eea121d924..cdc326ec333586da5650dd1894f07c2e64a80525 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -108,7 +108,7 @@ #size-cells = <0>; reg = <2>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 6c7b06854fced378be0aa62efe1c9929f183979b..51936bde1eb27d86bc79d48ebd01c4d973c082e9 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -826,28 +826,6 @@ static int locomo_match(struct device *_dev, struct device_driver *_drv) return dev->devid == drv->devid; } -static int locomo_bus_suspend(struct device *dev, pm_message_t state) -{ - struct locomo_dev *ldev = LOCOMO_DEV(dev); - struct locomo_driver *drv = LOCOMO_DRV(dev->driver); - int ret = 0; - - if (drv && drv->suspend) - ret = drv->suspend(ldev, state); - return ret; -} - -static int locomo_bus_resume(struct device *dev) -{ - struct locomo_dev *ldev = LOCOMO_DEV(dev); - struct locomo_driver *drv = LOCOMO_DRV(dev->driver); - int ret = 0; - - if (drv && drv->resume) - ret = drv->resume(ldev); - return ret; -} - static int locomo_bus_probe(struct device *dev) { struct locomo_dev *ldev = LOCOMO_DEV(dev); @@ -875,8 +853,6 @@ struct bus_type locomo_bus_type = { .match = locomo_match, .probe = locomo_bus_probe, .remove = locomo_bus_remove, - .suspend = locomo_bus_suspend, - .resume = locomo_bus_resume, }; int locomo_driver_register(struct locomo_driver *driver) diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 27d9720f7207b89728cf908cea4441adddf2aaad..bd0cf22f9cebdc26b5075c84f8e5db9c3679a935 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -34,6 +34,7 @@ CONFIG_DAVINCI_MUX_WARNINGS=y CONFIG_DAVINCI_RESET_CLOCKS=y CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -56,9 +57,11 @@ CONFIG_NETFILTER=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set +CONFIG_DMA_CMA=y CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m CONFIG_MTD_TESTS=m +CONFIG_MTD_CMDLINE_PARTS=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m CONFIG_MTD_CFI_INTELEXT=m @@ -195,7 +198,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_DAVINCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index a93cc2fcf79124896b0a0a228974ca3e51feb474..2f01e84b3d8c2d469c285334cbc7c48e0a992250 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -140,6 +140,6 @@ CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_MV_CESA=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 8c2a2619971b1e45326392cfdf31a0a3845790ed..f1d7834990ece60f33a2d6e18b794208d3ec73cc 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -244,7 +244,7 @@ CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m +CONFIG_USB_UAS=y CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y CONFIG_USB_HSIC_USB3503=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 32acac9ab81aad5be59676e09aa4c422cb598d6e..0d4494922561b80c407b98c44f321021320cd168 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -250,6 +250,7 @@ CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_DW_HDMI_AHB_AUDIO=m +CONFIG_DRM_DW_HDMI_CEC=y CONFIG_DRM_IMX=y CONFIG_DRM_IMX_PARALLEL_DISPLAY=y CONFIG_DRM_IMX_TVE=y @@ -365,6 +366,7 @@ CONFIG_PWM=y CONFIG_PWM_FSL_FTM=y CONFIG_PWM_IMX=y CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_MUX_MMIO=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index f907869e0ddcdf348da68b2d5f89f6d139003040..f710c192b33a2f2af800623f6515c0f80ffebbcd 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -189,6 +189,8 @@ CONFIG_KEYSTONE_NAVIGATOR_DMA=y CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=y +CONFIG_PWM=y +CONFIG_PWM_TIECAP=m CONFIG_KEYSTONE_IRQ=y CONFIG_RESET_TI_SCI=m CONFIG_RESET_TI_SYSCON=m diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index e15fa5f168bba0a72a1a26daf7e1c24dd4527138..0b54b4024e516137873852f3ea3117ec25e4ef4f 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -108,11 +108,11 @@ CONFIG_GPIO_MAX7300=y CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_SX150X=y CONFIG_GPIO_74X164=y CONFIG_GPIO_MAX7301=y CONFIG_GPIO_MC33880=y CONFIG_PINCTRL_MCP23S08=y +CONFIG_PINCTRL_SX150X=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 69a4bd13eea594352630cfcd81d9fae5b5ca385c..7c41bee284630d1403939763600975317be65325 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -279,6 +279,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_DEV_MV_CESA=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 0cacdbf84a7170083c8900f0f83fb680ba861b08..61509c4b769ffeeecf1a9d9e4a97bac5a4ba6d9e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -31,6 +31,7 @@ CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y +CONFIG_ARCH_BCM_HR2=y CONFIG_ARCH_BCM_NSP=y CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_281XX=y @@ -420,6 +421,7 @@ CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y +CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y @@ -689,10 +691,12 @@ CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y +CONFIG_USB_UAS=m CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_SUNXI=m CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y +CONFIG_USB_HSIC_USB3503=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y @@ -727,6 +731,7 @@ CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SDHCI_MSM=y +CONFIG_MMC_MESON_MX_SDIO=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y @@ -767,6 +772,7 @@ CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_TWL4030=y @@ -849,6 +855,7 @@ CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_REMOTEPROC=m CONFIG_ST_REMOTEPROC=m +CONFIG_RPMSG_VIRTIO=m CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_MEMORY=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index e39ee282e6ca7ed635c00dfee2e969b419389810..b831baddae026874e005c5869990b7e622aa4a69 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -163,5 +163,5 @@ CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_MV_CESA=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index d5e1370ec303d5440c4572262f6918d4a047a170..830e817a028abc7414b884dbf1aa7aa69dc132bc 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -219,7 +219,8 @@ CONFIG_AD525X_DPOT_I2C=m CONFIG_ICS932S401=m CONFIG_APDS9802ALS=m CONFIG_ISL29003=m -CONFIG_TI_DAC7512=m +CONFIG_IIO=m +CONFIG_AD5446=m CONFIG_EEPROM_AT24=m CONFIG_SENSORS_LIS3_SPI=m CONFIG_IDE=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 879159e4ab58c9cecc9a6ada8b2a3cf6ce2b90ca..c784d04e2ab7fca3f787cc91e2dc9e5faa6af571 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -28,9 +27,7 @@ CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCIE_QCOM=y CONFIG_SMP=y -CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_PREEMPT=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_CLEANCACHE=y CONFIG_ARM_APPENDED_DTB=y @@ -57,14 +54,13 @@ CONFIG_CFG80211=y CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_QCOM_EBI2=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y +CONFIG_QCOM_COINCELL=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y @@ -87,6 +83,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -98,12 +95,15 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8XXX_VIBRATOR=y CONFIG_INPUT_PMIC8XXX_PWRKEY=y CONFIG_INPUT_UINPUT=y +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MSM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_QUP=y @@ -121,11 +121,10 @@ CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y CONFIG_GPIOLIB=y -CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_CHARGER_QCOM_SMBB=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y +CONFIG_CHARGER_QCOM_SMBB=y CONFIG_THERMAL=y CONFIG_QCOM_TSENS=y CONFIG_MFD_PM8XXX=y @@ -135,8 +134,14 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_LP855X=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y @@ -155,15 +160,21 @@ CONFIG_USB_ACM=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_SERIAL=y +CONFIG_USB_HSIC_USB4604=y CONFIG_USB_MSM_OTG=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_CONFIGFS=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y -CONFIG_MMC_QCOM_DML=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y @@ -173,7 +184,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_PM8058=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RPMSG_QCOM_SMD=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PM8XXX=y CONFIG_DMADEVICES=y @@ -187,15 +197,17 @@ CONFIG_IPQ_GCC_4019=y CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_LCC_8960=y -CONFIG_MDM_GCC_9615=y CONFIG_MDM_LCC_9615=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y +CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_REMOTEPROC=y CONFIG_QCOM_ADSP_PIL=y CONFIG_QCOM_Q6V5_PIL=y CONFIG_QCOM_WCNSS_PIL=y +CONFIG_RPMSG_CHAR=y +CONFIG_RPMSG_QCOM_SMD=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y @@ -203,6 +215,7 @@ CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y CONFIG_QCOM_WCNSS_CTRL=y +CONFIG_EXTCON_QCOM_SPMI_MISC=y CONFIG_IIO=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_SW_TRIGGER=y @@ -211,9 +224,11 @@ CONFIG_MPU3050_I2C=y CONFIG_AK8975=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_BMP280=y +CONFIG_PWM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y -CONFIG_NVMEM=y +CONFIG_PHY_QCOM_USB_HS=y +CONFIG_PHY_QCOM_USB_HSIC=y CONFIG_QCOM_QFPROM=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y @@ -234,7 +249,4 @@ CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig index e3dc80ead46553d3ae2dbfbe056bc3cb28694762..77a56c23c6ef977fdc2ea94659ad002983ee91f4 100644 --- a/arch/arm/configs/raumfeld_defconfig +++ b/arch/arm/configs/raumfeld_defconfig @@ -37,7 +37,8 @@ CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_ISL29003=y -CONFIG_TI_DAC7512=y +CONFIG_IIO=y +CONFIG_AD5446=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 90e5c46913a5b58d9fc7ae7ea4e52143d83dcaaf..bb358ffde7d240eb952414e69c146810699090cb 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -18,7 +18,6 @@ CONFIG_EMBEDDED=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set # CONFIG_MMU is not set -CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_STM32=y CONFIG_CPU_V7M_NUM_IRQ=240 CONFIG_SET_MEM_PARAM=y @@ -44,18 +43,18 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_STM32F4=y +CONFIG_I2C_STM32F7=y +CONFIG_GPIO_STMPE=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y -CONFIG_REGULATOR=y -CONFIG_GPIO_STMPE=y CONFIG_MFD_STMPE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y @@ -67,6 +66,8 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_STM32=y CONFIG_DMADEVICES=y CONFIG_STM32_DMA=y +CONFIG_STM32_DMAMUX=y +CONFIG_STM32_MDMA=y CONFIG_IIO=y CONFIG_STM32_ADC_CORE=y CONFIG_STM32_ADC=y @@ -81,8 +82,6 @@ CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set CONFIG_CRYPTO=y -CONFIG_CRYPTO_DEV_STM32=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 9327e3a101dc4852e530a9ef6a6aaeb2e83e92f2..0a8d7bba2cb01235e21a54019e64db81741c482a 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -107,6 +107,7 @@ static inline u32 arch_timer_get_cntkctl(void) static inline void arch_timer_set_cntkctl(u32 cntkctl) { asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); + isb(); } #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 441933311bbf8a2eda92b5e1547f550a98a6b690..cb546425da8a09437cfb036bdc260ec7fce9f24f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -174,6 +174,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) return read_cpuid(CPUID_CACHETYPE); } +static inline unsigned int __attribute_const__ read_cpuid_mputype(void) +{ + return read_cpuid(CPUID_MPUIR); +} + #elif defined(CONFIG_CPU_V7M) static inline unsigned int __attribute_const__ read_cpuid_id(void) @@ -186,6 +191,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) return readl(BASEADDR_V7M_SCB + V7M_SCB_CTR); } +static inline unsigned int __attribute_const__ read_cpuid_mputype(void) +{ + return readl(BASEADDR_V7M_SCB + MPU_TYPE); +} + #else /* ifdef CONFIG_CPU_CP15 / elif defined(CONFIG_CPU_V7M) */ static inline unsigned int __attribute_const__ read_cpuid_id(void) diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 0722ec6be692381cee16f3f2ea4e8c32ce05677d..6821f1249300d99ee165d53053880ade369b0d78 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -7,7 +7,6 @@ #include #include #include -#include #include #define ARM_MAPPING_ERROR (~(dma_addr_t)0x0) diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 3ca1199978186b47b3858996da4005952c5dc72b..daf837423a766ee22db60439e9006ed617bda25e 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -190,13 +190,6 @@ extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs); -/* - * This can be called during early boot to increase the size of the atomic - * coherent DMA pool above the default value of 256KiB. It must be called - * before postcore_initcall. - */ -extern void __init init_dma_coherent_pool_size(unsigned long size); - /* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" * and utilize bounce buffers as needed to work around limited DMA windows. diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 8c5ca92a87a990ea69d58b9167299fc53d2d9e92..b078d992414b7ca21992f64d5ec2b2310e70b6fb 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -101,10 +101,15 @@ struct elf32_hdr; extern int elf_check_arch(const struct elf32_hdr *); #define elf_check_arch elf_check_arch +#define ELFOSABI_ARM_FDPIC 65 /* ARM FDPIC platform */ +#define elf_check_fdpic(x) ((x)->e_ident[EI_OSABI] == ELFOSABI_ARM_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_ARM_PIC) +#define ELF_FDPIC_CORE_EFLAGS 0 + #define vmcore_elf64_check_arch(x) (0) -extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); -#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) +extern int arm_elf_read_implies_exec(int); +#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(stk) struct task_struct; int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); @@ -121,6 +126,13 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); have no such handler. */ #define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, dynamic_addr) \ + do { \ + (_r)->ARM_r7 = _exec_map_addr; \ + (_r)->ARM_r8 = _interp_map_addr; \ + (_r)->ARM_r9 = dynamic_addr; \ + } while(0) + extern void elf_set_personality(const struct elf32_hdr *); #define SET_PERSONALITY(ex) elf_set_personality(&(ex)) diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h index 74e51d6bd93fd072fc95de22f67806dc89807e85..f8712e3c29cfec59749576e56bbda43a5a52d5fa 100644 --- a/arch/arm/include/asm/hardware/locomo.h +++ b/arch/arm/include/asm/hardware/locomo.h @@ -189,8 +189,6 @@ struct locomo_driver { unsigned int devid; int (*probe)(struct locomo_dev *); int (*remove)(struct locomo_dev *); - int (*suspend)(struct locomo_dev *, pm_message_t); - int (*resume)(struct locomo_dev *); }; #define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index b03d3fa2e58d86595ad0df1df16abfdccbaf76be..eb4e4207cd3caed204fecdaeb71956eaa1e0b074 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -19,7 +19,6 @@ } while (0) extern pte_t *pkmap_page_table; -extern pte_t *fixmap_page_table; extern void *kmap_high(struct page *page); extern void kunmap_high(struct page *page); diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 14d68a4d826f6388af790b91bc3c2ae7fa80de13..36dd2962a42db2868badb568e38118884321eddb 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -68,6 +68,8 @@ extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); +extern void __kvm_timer_set_cntvoff(u32 cntvoff_low, u32 cntvoff_high); + extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); extern void __init_stage2_translation(void); diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 98089ffd91bb602649cc7724adafe5ce045b9c8a..3d22eb87f919a81ce530baeee88247c75521a4ef 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -25,7 +25,22 @@ #include #include +/* arm64 compatibility macros */ +#define COMPAT_PSR_MODE_ABT ABT_MODE +#define COMPAT_PSR_MODE_UND UND_MODE +#define COMPAT_PSR_T_BIT PSR_T_BIT +#define COMPAT_PSR_I_BIT PSR_I_BIT +#define COMPAT_PSR_A_BIT PSR_A_BIT +#define COMPAT_PSR_E_BIT PSR_E_BIT +#define COMPAT_PSR_IT_MASK PSR_IT_MASK + unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); + +static inline unsigned long *vcpu_reg32(struct kvm_vcpu *vcpu, u8 reg_num) +{ + return vcpu_reg(vcpu, reg_num); +} + unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu); static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu, @@ -42,10 +57,25 @@ static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num, bool kvm_condition_valid32(const struct kvm_vcpu *vcpu); void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr); -void kvm_inject_undefined(struct kvm_vcpu *vcpu); +void kvm_inject_undef32(struct kvm_vcpu *vcpu); +void kvm_inject_dabt32(struct kvm_vcpu *vcpu, unsigned long addr); +void kvm_inject_pabt32(struct kvm_vcpu *vcpu, unsigned long addr); void kvm_inject_vabt(struct kvm_vcpu *vcpu); -void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr); -void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr); + +static inline void kvm_inject_undefined(struct kvm_vcpu *vcpu) +{ + kvm_inject_undef32(vcpu); +} + +static inline void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) +{ + kvm_inject_dabt32(vcpu, addr); +} + +static inline void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) +{ + kvm_inject_pabt32(vcpu, addr); +} static inline bool kvm_condition_valid(const struct kvm_vcpu *vcpu) { @@ -203,7 +233,7 @@ static inline u8 kvm_vcpu_trap_get_fault_type(struct kvm_vcpu *vcpu) static inline bool kvm_vcpu_dabt_isextabt(struct kvm_vcpu *vcpu) { - switch (kvm_vcpu_trap_get_fault_type(vcpu)) { + switch (kvm_vcpu_trap_get_fault(vcpu)) { case FSC_SEA: case FSC_SEA_TTW0: case FSC_SEA_TTW1: diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 4a879f6ff13bea92d189eec9370be73cd616705c..242151ea69087a4ec8c4b5fd963c210ff30a89fe 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -293,4 +293,7 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr); +/* All host FP/SIMD state is restored on guest exit, so nothing to save: */ +static inline void kvm_fpsimd_flush_cpu_state(void) {} + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index 14b5903f022461a2f090ad16ff7880e13cea04d3..ab20ffa8b9e7658bc73779b7b6ae711f140d2105 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -98,8 +98,8 @@ #define cntvoff_el2 CNTVOFF #define cnthctl_el2 CNTHCTL -void __timer_save_state(struct kvm_vcpu *vcpu); -void __timer_restore_state(struct kvm_vcpu *vcpu); +void __timer_enable_traps(struct kvm_vcpu *vcpu); +void __timer_disable_traps(struct kvm_vcpu *vcpu); void __vgic_v2_save_state(struct kvm_vcpu *vcpu); void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 65669b9ce128821e92178024d80507150411e1ff..1592a4264488e2c0646c5500fc6e4b8c44d5247a 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -15,6 +15,10 @@ typedef struct { #ifdef CONFIG_VDSO unsigned long vdso; #endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID @@ -34,6 +38,10 @@ typedef struct { */ typedef struct { unsigned long end_brk; +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif } mm_context_t; #endif diff --git a/arch/arm/include/asm/mpu.h b/arch/arm/include/asm/mpu.h index 0c3f774fa4b5dfc451b2180e576d3e910f15dbb6..6d1491c8ee2227eeea54624f7e2eca07e2b84131 100644 --- a/arch/arm/include/asm/mpu.h +++ b/arch/arm/include/asm/mpu.h @@ -2,8 +2,6 @@ #ifndef __ARM_MPU_H #define __ARM_MPU_H -#ifdef CONFIG_ARM_MPU - /* MPUIR layout */ #define MPUIR_nU 1 #define MPUIR_DREGION 8 @@ -18,6 +16,11 @@ /* MPU D/I Size Register fields */ #define MPU_RSR_SZ 1 #define MPU_RSR_EN 0 +#define MPU_RSR_SD 8 + +/* Number of subregions (SD) */ +#define MPU_NR_SUBREGS 8 +#define MPU_MIN_SUBREG_SIZE 256 /* The D/I RSR value for an enabled region spanning the whole of memory */ #define MPU_RSR_ALL_MEM 63 @@ -39,6 +42,7 @@ #endif /* Access permission bits of ACR (only define those that we use)*/ +#define MPU_AP_PL1RO_PL0NA (0x5 << 8) #define MPU_AP_PL1RW_PL0RW (0x3 << 8) #define MPU_AP_PL1RW_PL0R0 (0x2 << 8) #define MPU_AP_PL1RW_PL0NA (0x1 << 8) @@ -47,7 +51,7 @@ #define MPU_PROBE_REGION 0 #define MPU_BG_REGION 1 #define MPU_RAM_REGION 2 -#define MPU_VECTORS_REGION 3 +#define MPU_ROM_REGION 3 /* Maximum number of regions Linux is interested in */ #define MPU_MAX_REGIONS 16 @@ -65,13 +69,23 @@ struct mpu_rgn { }; struct mpu_rgn_info { - u32 mpuir; + unsigned int used; struct mpu_rgn rgns[MPU_MAX_REGIONS]; }; extern struct mpu_rgn_info mpu_rgn_info; -#endif /* __ASSEMBLY__ */ +#ifdef CONFIG_ARM_MPU + +extern void __init adjust_lowmem_bounds_mpu(void); +extern void __init mpu_setup(void); -#endif /* CONFIG_ARM_MPU */ +#else + +static inline void adjust_lowmem_bounds_mpu(void) {} +static inline void mpu_setup(void) {} + +#endif /* !CONFIG_ARM_MPU */ + +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index b2902a5cd780fdbeaba81b7e4e7f9b4a610350be..2d7344f0e2085b2a72da34f04fc3264e88834b3a 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -57,7 +57,7 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) extern pgd_t *pgd_alloc(struct mm_struct *mm); extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); -#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO) +#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO) static inline void clean_pte_table(pte_t *pte) { diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index c3d5fc124a054c6309ffacdb2845ff22fd5bfa56..338cbe0a18efe742bfc9ab9c9210036636a2d53b 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -47,15 +47,24 @@ struct thread_struct { #define INIT_THREAD { } -#ifdef CONFIG_MMU -#define nommu_start_thread(regs) do { } while (0) -#else -#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data -#endif - #define start_thread(regs,pc,sp) \ ({ \ + unsigned long r7, r8, r9; \ + \ + if (IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC)) { \ + r7 = regs->ARM_r7; \ + r8 = regs->ARM_r8; \ + r9 = regs->ARM_r9; \ + } \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ + if (IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC) && \ + current->personality & FDPIC_FUNCPTRS) { \ + regs->ARM_r7 = r7; \ + regs->ARM_r8 = r8; \ + regs->ARM_r9 = r9; \ + regs->ARM_r10 = current->mm->start_data; \ + } else if (!IS_ENABLED(CONFIG_MMU)) \ + regs->ARM_r10 = current->mm->start_data; \ if (current->personality & ADDR_LIMIT_32BIT) \ regs->ARM_cpsr = USR_MODE; \ else \ @@ -65,7 +74,6 @@ struct thread_struct { regs->ARM_cpsr |= PSR_ENDSTATE; \ regs->ARM_pc = pc & ~1; /* pc */ \ regs->ARM_sp = sp; /* sp */ \ - nommu_start_thread(regs); \ }) /* Forward declaration, a strange C thing */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 3d6dc8b460e4b4ea6b32d66f3ec0004378e53d9f..709a55989cb0641f7006f5a1765898aa9fb972c3 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -60,7 +60,7 @@ asmlinkage void secondary_start_kernel(void); */ struct secondary_data { union { - unsigned long mpu_rgn_szr; + struct mpu_rgn_info *mpu_rgn_info; u64 pgdir; }; unsigned long swapper_pg_dir; diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h index 800f5228939fa669dbc255d43146e62a2309356f..b818e5d0cd7840efcdc2689df5d18401bbf10b0a 100644 --- a/arch/arm/include/asm/smp_scu.h +++ b/arch/arm/include/asm/smp_scu.h @@ -28,6 +28,8 @@ static inline unsigned long scu_a9_get_base(void) #ifdef CONFIG_HAVE_ARM_SCU unsigned int scu_get_core_count(void __iomem *); int scu_power_mode(void __iomem *, unsigned int); +int scu_cpu_power_enable(void __iomem *, unsigned int); +int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu); #else static inline unsigned int scu_get_core_count(void __iomem *scu_base) { @@ -37,6 +39,16 @@ static inline int scu_power_mode(void __iomem *scu_base, unsigned int mode) { return -EINVAL; } +static inline int scu_cpu_power_enable(void __iomem *scu_base, + unsigned int mode) +{ + return -EINVAL; +} +static inline int scu_get_cpu_power_mode(void __iomem *scu_base, + unsigned int logical_cpu) +{ + return -EINVAL; +} #endif #if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU) diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index f59ab9bcbaf956b8cac5568e62c54de17a7cd648..5d88d2f22b2cc5d62ccc883cded7693605134084 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -25,6 +25,14 @@ void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); const struct cpumask *cpu_coregroup_mask(int cpu); +#include + +/* Replace task scheduler's default frequency-invariant accounting */ +#define arch_scale_freq_capacity topology_get_freq_scale + +/* Replace task scheduler's default cpu-invariant accounting */ +#define arch_scale_cpu_capacity topology_get_cpu_scale + #else static inline void init_cpu_topology(void) { } diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index 3f0d95ab14b8ee03ed5735548a620fe04d8d63f0..5c5e62cb304b4ebc77896bb5e70ca190f398ae35 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -3,6 +3,7 @@ #define _ASMARM_UCONTEXT_H #include +#include /* * struct sigcontext only has room for the basic registers, but struct diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h index e6d9e29fcae44ce06c8829fd27dc30ac43c56049..634e77107425df69c4b658c4887a9b5cec1cfeac 100644 --- a/arch/arm/include/asm/v7m.h +++ b/arch/arm/include/asm/v7m.h @@ -58,6 +58,16 @@ #define V7M_SCB_CCSIDR 0x80 /* Cache size ID register */ #define V7M_SCB_CSSELR 0x84 /* Cache size selection register */ +/* Memory-mapped MPU registers for M-class */ +#define MPU_TYPE 0x90 +#define MPU_CTRL 0x94 +#define MPU_CTRL_ENABLE 1 +#define MPU_CTRL_PRIVDEFENA (1 << 2) + +#define MPU_RNR 0x98 +#define MPU_RBAR 0x9c +#define MPU_RASR 0xa0 + /* Cache opeartions */ #define V7M_SCB_ICIALLU 0x250 /* I-cache invalidate all to PoU */ #define V7M_SCB_ICIMVAU 0x258 /* I-cache invalidate by MVA to PoU */ diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S index 52aaed2b936fb0324c707f801b06a90ce88f60f7..c826f15d2f80382e160633bbc82f4d3a02f9b8fb 100644 --- a/arch/arm/include/debug/brcmstb.S +++ b/arch/arm/include/debug/brcmstb.S @@ -58,6 +58,7 @@ /* Check SUN_TOP_CTRL base */ ldr \rp, =SUN_TOP_CTRL_BASE @ load SUN_TOP_CTRL PA ldr \rv, [\rp, #0] @ get register contents +ARM_BE8( rev \rv, \rv ) and \rv, \rv, #0xffffff00 @ strip revision bits [7:0] /* Chip specific detection starts here */ @@ -98,11 +99,13 @@ .endm .macro store, rd, rx:vararg +ARM_BE8( rev \rd, \rd ) str \rd, \rx .endm .macro load, rd, rx:vararg ldr \rd, \rx +ARM_BE8( rev \rd, \rd ) .endm .macro senduart,rd,rx diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 1f57bbe82b6fb8582c2a3a1617345266c22e33e8..6edd177bb1c7c66e0ec32caf7ec8d2c3680ed2f3 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -152,6 +152,12 @@ struct kvm_arch_memory_slot { (__ARM_CP15_REG(op1, 0, crm, 0) | KVM_REG_SIZE_U64) #define ARM_CP15_REG64(...) __ARM_CP15_REG64(__VA_ARGS__) +/* PL1 Physical Timer Registers */ +#define KVM_REG_ARM_PTIMER_CTL ARM_CP15_REG32(0, 14, 2, 1) +#define KVM_REG_ARM_PTIMER_CNT ARM_CP15_REG64(0, 14) +#define KVM_REG_ARM_PTIMER_CVAL ARM_CP15_REG64(2, 14) + +/* Virtual Timer Registers */ #define KVM_REG_ARM_TIMER_CTL ARM_CP15_REG32(0, 14, 3, 1) #define KVM_REG_ARM_TIMER_CNT ARM_CP15_REG64(1, 14) #define KVM_REG_ARM_TIMER_CVAL ARM_CP15_REG64(3, 14) @@ -216,6 +222,7 @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_ITS_SAVE_TABLES 1 #define KVM_DEV_ARM_ITS_RESTORE_TABLES 2 #define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3 +#define KVM_DEV_ARM_ITS_CTRL_RESET 4 /* KVM_IRQ_LINE irq field index values */ #define KVM_ARM_IRQ_TYPE_SHIFT 24 diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h index b67cda536c255b876cdf8fa6b0cbafae0f97b245..e61c65b4018db0326898c0170df19aa63bd98385 100644 --- a/arch/arm/include/uapi/asm/ptrace.h +++ b/arch/arm/include/uapi/asm/ptrace.h @@ -32,6 +32,10 @@ #define PTRACE_SETVFPREGS 28 #define PTRACE_GETHBPREGS 29 #define PTRACE_SETHBPREGS 30 +#define PTRACE_GETFDPIC 31 + +#define PTRACE_GETFDPIC_EXEC 0 +#define PTRACE_GETFDPIC_INTERP 1 /* * PSR bits @@ -54,6 +58,7 @@ #endif #define FIQ_MODE 0x00000011 #define IRQ_MODE 0x00000012 +#define MON_MODE 0x00000016 #define ABT_MODE 0x00000017 #define HYP_MODE 0x0000001a #define UND_MODE 0x0000001b diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index 39b2ad997e91ae8edf4aced8dd583599816db6c1..93ecf8aa4fe5138c56001f113f794694ba30bcc9 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -36,5 +36,6 @@ #define __ARM_NR_usr26 (__ARM_NR_BASE+3) #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) +#define __ARM_NR_get_tls (__ARM_NR_BASE+6) #endif /* _UAPI__ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 499f978fb1fd612c5e0f1e6fce6c44fac5c5ef0b..b59ac4bf82b8a9d2c99a5c7ef062db9f62722adc 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -88,6 +88,11 @@ head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +# This is executed very early using a temporary stack when no memory allocator +# nor global data is available. Everything has to be allocated on the stack. +CFLAGS_head-inflate-data.o := $(call cc-option,-Wframe-larger-than=10240) +obj-$(CONFIG_XIP_DEFLATED_DATA) += head-inflate-data.o + obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a ifeq ($(CONFIG_ARM_PSCI),y) diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 608008229c7db6881f8d103750153280d96105d7..f369ece99958770f0dad006127e7cb4327fdf098 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -23,11 +23,13 @@ #include #include #include +#include #include #include #include #include #include +#include "signal.h" /* * Make sure that the compiler and target are compatible. @@ -112,6 +114,9 @@ int main(void) DEFINE(SVC_ADDR_LIMIT, offsetof(struct svc_pt_regs, addr_limit)); DEFINE(SVC_REGS_SIZE, sizeof(struct svc_pt_regs)); BLANK(); + DEFINE(SIGFRAME_RC3_OFFSET, offsetof(struct sigframe, retcode[3])); + DEFINE(RT_SIGFRAME_RC3_OFFSET, offsetof(struct rt_sigframe, sig.retcode[3])); + BLANK(); #ifdef CONFIG_CACHE_L2X0 DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base)); DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl)); @@ -182,6 +187,16 @@ int main(void) BLANK(); #ifdef CONFIG_VDSO DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store)); +#endif + BLANK(); +#ifdef CONFIG_ARM_MPU + DEFINE(MPU_RNG_INFO_RNGS, offsetof(struct mpu_rgn_info, rgns)); + DEFINE(MPU_RNG_INFO_USED, offsetof(struct mpu_rgn_info, used)); + + DEFINE(MPU_RNG_SIZE, sizeof(struct mpu_rgn)); + DEFINE(MPU_RGN_DRBAR, offsetof(struct mpu_rgn, drbar)); + DEFINE(MPU_RGN_DRSR, offsetof(struct mpu_rgn, drsr)); + DEFINE(MPU_RGN_DRACR, offsetof(struct mpu_rgn, dracr)); #endif return 0; } diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 98fbfd235ac875662c6666abfad5c53fbd93b1df..c10a3e8ee998efeaabc0c544037006ef0ab6cb3f 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -196,11 +196,8 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) break; } - if (!mdesc) { - early_print("\nError: unrecognized/unsupported machine ID" - " (r1 = 0x%08x).\n\n", machine_nr); - dump_machine_table(); /* does not return */ - } + if (!mdesc) + return NULL; if (__atags_pointer) tags = phys_to_virt(__atags_pointer); diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 0a498cb3fad88d046c23073a5d1b7785fdfaf1a7..b795dc2408c05a65fb3e28ec2001ebb04eaf50df 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -55,7 +55,9 @@ ENDPROC(printhex4) ENTRY(printhex2) mov r1, #2 -printhex: adr r2, hexbuf +printhex: adr r2, hexbuf_rel + ldr r3, [r2] + add r2, r2, r3 add r3, r2, r1 mov r1, #0 strb r1, [r3] @@ -71,7 +73,11 @@ printhex: adr r2, hexbuf b printascii ENDPROC(printhex2) -hexbuf: .space 16 + .pushsection .bss +hexbuf_addr: .space 16 + .popsection + .align +hexbuf_rel: .long hexbuf_addr - . .ltorg @@ -79,25 +85,28 @@ hexbuf: .space 16 ENTRY(printascii) addruart_current r3, r1, r2 - b 2f -1: waituart r2, r3 - senduart r1, r3 - busyuart r2, r3 - teq r1, #'\n' - moveq r1, #'\r' - beq 1b -2: teq r0, #0 +1: teq r0, #0 ldrneb r1, [r0], #1 teqne r1, #0 - bne 1b - ret lr + reteq lr +2: teq r1, #'\n' + bne 3f + mov r1, #'\r' + waituart r2, r3 + senduart r1, r3 + busyuart r2, r3 + mov r1, #'\n' +3: waituart r2, r3 + senduart r1, r3 + busyuart r2, r3 + b 1b ENDPROC(printascii) ENTRY(printch) addruart_current r3, r1, r2 mov r1, r0 mov r0, #0 - b 1b + b 2b ENDPROC(printch) #ifdef CONFIG_MMU @@ -124,7 +133,9 @@ ENTRY(printascii) ENDPROC(printascii) ENTRY(printch) - adr r1, hexbuf + adr r1, hexbuf_rel + ldr r2, [r1] + add r1, r1, r2 strb r0, [r1] mov r0, #0x03 @ SYS_WRITEC ARM( svc #0x123456 ) diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c index 43076536965c6631741f135472192cb79c1e2041..9257736ec9fa56b85f292ce019fca1a2689c1ab1 100644 --- a/arch/arm/kernel/early_printk.c +++ b/arch/arm/kernel/early_printk.c @@ -11,16 +11,20 @@ #include #include #include +#include -extern void printch(int); +extern void printascii(const char *); static void early_write(const char *s, unsigned n) { - while (n-- > 0) { - if (*s == '\n') - printch('\r'); - printch(*s); - s++; + char buf[128]; + while (n) { + unsigned l = min(n, sizeof(buf)-1); + memcpy(buf, s, l); + buf[l] = 0; + s += l; + n -= l; + printascii(buf); } } diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index 846dda2f3c48f1532569aad4d52a89af4d7b9340..18242298138621143f87a17c3c4ee059614eb329 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -4,6 +4,7 @@ #include #include #include +#include #include int elf_check_arch(const struct elf32_hdr *x) @@ -81,7 +82,7 @@ EXPORT_SYMBOL(elf_set_personality); * - the binary requires an executable stack * - we're running on a CPU which doesn't support NX. */ -int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) +int arm_elf_read_implies_exec(int executable_stack) { if (executable_stack != EXSTACK_DISABLE_X) return 1; @@ -90,3 +91,24 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 0; } EXPORT_SYMBOL(arm_elf_read_implies_exec); + +#if defined(CONFIG_MMU) && defined(CONFIG_BINFMT_ELF_FDPIC) + +void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, + struct elf_fdpic_params *interp_params, + unsigned long *start_stack, + unsigned long *start_brk) +{ + elf_set_personality(&exec_params->hdr); + + exec_params->load_addr = 0x8000; + interp_params->load_addr = ELF_ET_DYN_BASE; + *start_stack = TASK_SIZE - SZ_16M; + + if ((exec_params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) == ELF_FDPIC_FLAG_INDEPENDENT) { + exec_params->flags &= ~ELF_FDPIC_FLAG_ARRANGEMENT; + exec_params->flags |= ELF_FDPIC_FLAG_CONSTDISP; + } +} + +#endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 99c908226065cf6331324309edeadfa618597874..e655dcd0a933c7e293c800facfdbd44f66154098 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -400,17 +400,8 @@ ENDPROC(sys_fstatfs64_wrapper) * offset, we return EINVAL. */ sys_mmap2: -#if PAGE_SHIFT > 12 - tst r5, #PGOFF_MASK - moveq r5, r5, lsr #PAGE_SHIFT - 12 - streq r5, [sp, #4] - beq sys_mmap_pgoff - mov r0, #-EINVAL - ret lr -#else str r5, [sp, #4] b sys_mmap_pgoff -#endif ENDPROC(sys_mmap2) #ifdef CONFIG_OABI_COMPAT diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 8733012d231f32d5a370e2666885b0813dff097b..21dde771a7dd8d1465a73145f6351db0dfe922b4 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -79,47 +79,69 @@ ENDPROC(__vet_atags) */ __INIT __mmap_switched: - adr r3, __mmap_switched_data - - ldmia r3!, {r4, r5, r6, r7} - cmp r4, r5 @ Copy data segment if needed -1: cmpne r5, r6 - ldrne fp, [r4], #4 - strne fp, [r5], #4 - bne 1b - - mov fp, #0 @ Clear BSS (and zero fp) -1: cmp r6, r7 - strcc fp, [r6],#4 - bcc 1b - - ARM( ldmia r3, {r4, r5, r6, r7, sp}) - THUMB( ldmia r3, {r4, r5, r6, r7} ) - THUMB( ldr sp, [r3, #16] ) - str r9, [r4] @ Save processor ID - str r1, [r5] @ Save machine type - str r2, [r6] @ Save atags pointer - cmp r7, #0 - strne r0, [r7] @ Save control register values + + mov r7, r1 + mov r8, r2 + mov r10, r0 + + adr r4, __mmap_switched_data + mov fp, #0 + +#if defined(CONFIG_XIP_DEFLATED_DATA) + ARM( ldr sp, [r4], #4 ) + THUMB( ldr sp, [r4] ) + THUMB( add r4, #4 ) + bl __inflate_kernel_data @ decompress .data to RAM + teq r0, #0 + bne __error +#elif defined(CONFIG_XIP_KERNEL) + ARM( ldmia r4!, {r0, r1, r2, sp} ) + THUMB( ldmia r4!, {r0, r1, r2, r3} ) + THUMB( mov sp, r3 ) + sub r2, r2, r1 + bl memcpy @ copy .data to RAM +#endif + + ARM( ldmia r4!, {r0, r1, sp} ) + THUMB( ldmia r4!, {r0, r1, r3} ) + THUMB( mov sp, r3 ) + sub r1, r1, r0 + bl __memzero @ clear .bss + + ldmia r4, {r0, r1, r2, r3} + str r9, [r0] @ Save processor ID + str r7, [r1] @ Save machine type + str r8, [r2] @ Save atags pointer + cmp r3, #0 + strne r10, [r3] @ Save control register values + mov lr, #0 b start_kernel ENDPROC(__mmap_switched) .align 2 .type __mmap_switched_data, %object __mmap_switched_data: - .long __data_loc @ r4 - .long _sdata @ r5 - .long __bss_start @ r6 - .long _end @ r7 - .long processor_id @ r4 - .long __machine_arch_type @ r5 - .long __atags_pointer @ r6 +#ifdef CONFIG_XIP_KERNEL +#ifndef CONFIG_XIP_DEFLATED_DATA + .long _sdata @ r0 + .long __data_loc @ r1 + .long _edata_loc @ r2 +#endif + .long __bss_stop @ sp (temporary stack in .bss) +#endif + + .long __bss_start @ r0 + .long __bss_stop @ r1 + .long init_thread_union + THREAD_START_SP @ sp + + .long processor_id @ r0 + .long __machine_arch_type @ r1 + .long __atags_pointer @ r2 #ifdef CONFIG_CPU_CP15 - .long cr_alignment @ r7 + .long cr_alignment @ r3 #else - .long 0 @ r7 + .long 0 @ r3 #endif - .long init_thread_union + THREAD_START_SP @ sp .size __mmap_switched_data, . - __mmap_switched_data /* diff --git a/arch/arm/kernel/head-inflate-data.c b/arch/arm/kernel/head-inflate-data.c new file mode 100644 index 0000000000000000000000000000000000000000..6dd0ce5e6058d9059a975cf76c87f5953bcd241b --- /dev/null +++ b/arch/arm/kernel/head-inflate-data.c @@ -0,0 +1,62 @@ +/* + * XIP kernel .data segment decompressor + * + * Created by: Nicolas Pitre, August 2017 + * Copyright: (C) 2017 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/* for struct inflate_state */ +#include "../../../lib/zlib_inflate/inftrees.h" +#include "../../../lib/zlib_inflate/inflate.h" +#include "../../../lib/zlib_inflate/infutil.h" + +extern char __data_loc[]; +extern char _edata_loc[]; +extern char _sdata[]; + +/* + * This code is called very early during the boot process to decompress + * the .data segment stored compressed in ROM. Therefore none of the global + * variables are valid yet, hence no kernel services such as memory + * allocation is available. Everything must be allocated on the stack and + * we must avoid any global data access. We use a temporary stack located + * in the .bss area. The linker script makes sure the .bss is big enough + * to hold our stack frame plus some room for called functions. + * + * We mimic the code in lib/decompress_inflate.c to use the smallest work + * area possible. And because everything is statically allocated on the + * stack then there is no need to clean up before returning. + */ + +int __init __inflate_kernel_data(void) +{ + struct z_stream_s stream, *strm = &stream; + struct inflate_state state; + char *in = __data_loc; + int rc; + + /* Check and skip gzip header (assume no filename) */ + if (in[0] != 0x1f || in[1] != 0x8b || in[2] != 0x08 || in[3] & ~3) + return -1; + in += 10; + + strm->workspace = &state; + strm->next_in = in; + strm->avail_in = _edata_loc - __data_loc; /* upper bound */ + strm->next_out = _sdata; + strm->avail_out = _edata_loc - __data_loc; + zlib_inflateInit2(strm, -MAX_WBITS); + WS(strm)->inflate_state.wsize = 0; + WS(strm)->inflate_state.window = NULL; + rc = zlib_inflate(strm, Z_FINISH); + if (rc == Z_OK || rc == Z_STREAM_END) + rc = strm->avail_out; /* should be 0 */ + return rc; +} diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 2e21e08de7478b5e19f1aee89521356e52d8c041..2e38f85b757afa377ee3571639c99d4ebbac04a8 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -13,6 +13,7 @@ */ #include #include +#include #include #include @@ -110,8 +111,8 @@ ENTRY(secondary_startup) #ifdef CONFIG_ARM_MPU /* Use MPU region info supplied by __cpu_up */ - ldr r6, [r7] @ get secondary_data.mpu_szr - bl __setup_mpu @ Initialize the MPU + ldr r6, [r7] @ get secondary_data.mpu_rgn_info + bl __secondary_setup_mpu @ Initialize the MPU #endif badr lr, 1f @ return (PIC) address @@ -175,19 +176,33 @@ ENDPROC(__after_proc_init) #ifdef CONFIG_ARM_MPU +#ifndef CONFIG_CPU_V7M /* Set which MPU region should be programmed */ -.macro set_region_nr tmp, rgnr +.macro set_region_nr tmp, rgnr, unused mov \tmp, \rgnr @ Use static region numbers mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR .endm /* Setup a single MPU region, either D or I side (D-side for unified) */ -.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE +.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE, unused mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR .endm +#else +.macro set_region_nr tmp, rgnr, base + mov \tmp, \rgnr + str \tmp, [\base, #MPU_RNR] +.endm + +.macro setup_region bar, acr, sr, unused, base + lsl \acr, \acr, #16 + orr \acr, \acr, \sr + str \bar, [\base, #MPU_RBAR] + str \acr, [\base, #MPU_RASR] +.endm +#endif /* * Setup the MPU and initial MPU Regions. We create the following regions: * Region 0: Use this for probing the MPU details, so leave disabled. @@ -201,64 +216,137 @@ ENDPROC(__after_proc_init) ENTRY(__setup_mpu) /* Probe for v7 PMSA compliance */ - mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 +M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) +M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) + +AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0 +M_CLASS(ldr r0, [r12, 0x50]) and r0, r0, #(MMFR0_PMSA) @ PMSA field teq r0, #(MMFR0_PMSAv7) @ PMSA v7 - bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA + bxne lr /* Determine whether the D/I-side memory map is unified. We set the * flags here and continue to use them for the rest of this function */ - mrc p15, 0, r0, c0, c0, 4 @ MPUIR +AR_CLASS(mrc p15, 0, r0, c0, c0, 4) @ MPUIR +M_CLASS(ldr r0, [r12, #MPU_TYPE]) ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU - beq __error_p @ Fail: ARM_MPU and no MPU + bxeq lr tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified /* Setup second region first to free up r6 */ - set_region_nr r0, #MPU_RAM_REGION + set_region_nr r0, #MPU_RAM_REGION, r12 isb /* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */ ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL) - setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled - beq 1f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled + setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled + beq 1f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled 1: isb /* First/background region */ - set_region_nr r0, #MPU_BG_REGION + set_region_nr r0, #MPU_BG_REGION, r12 isb /* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */ mov r0, #0 @ BG region starts at 0x0 ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA) mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled - setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled - beq 2f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled + setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ 0x0, BG region, enabled + beq 2f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE r12 @ 0x0, BG region, enabled 2: isb - /* Vectors region */ - set_region_nr r0, #MPU_VECTORS_REGION +#ifdef CONFIG_XIP_KERNEL + set_region_nr r0, #MPU_ROM_REGION, r12 isb - /* Shared, inaccessible to PL0, rw PL1 */ - mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE - ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL) - /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */ - mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN) - - setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled - beq 3f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled + + ldr r5,=(MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL) + + ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start + ldr r6, =(_exiprom) @ ROM end + sub r6, r6, r0 @ Minimum size of region to map + clz r6, r6 @ Region size must be 2^N... + rsb r6, r6, #31 @ ...so round up region size + lsl r6, r6, #MPU_RSR_SZ @ Put size in right field + orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit + + setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled + beq 3f @ Memory-map not unified + setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled 3: isb +#endif + + /* Enable the MPU */ +AR_CLASS(mrc p15, 0, r0, c1, c0, 0) @ Read SCTLR +AR_CLASS(bic r0, r0, #CR_BR) @ Disable the 'default mem-map' +AR_CLASS(orr r0, r0, #CR_M) @ Set SCTRL.M (MPU on) +AR_CLASS(mcr p15, 0, r0, c1, c0, 0) @ Enable MPU + +M_CLASS(ldr r0, [r12, #MPU_CTRL]) +M_CLASS(bic r0, #MPU_CTRL_PRIVDEFENA) +M_CLASS(orr r0, #MPU_CTRL_ENABLE) +M_CLASS(str r0, [r12, #MPU_CTRL]) + isb + + ret lr +ENDPROC(__setup_mpu) + +#ifdef CONFIG_SMP +/* + * r6: pointer at mpu_rgn_info + */ + +ENTRY(__secondary_setup_mpu) + /* Probe for v7 PMSA compliance */ + mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 + and r0, r0, #(MMFR0_PMSA) @ PMSA field + teq r0, #(MMFR0_PMSAv7) @ PMSA v7 + bne __error_p + + /* Determine whether the D/I-side memory map is unified. We set the + * flags here and continue to use them for the rest of this function */ + mrc p15, 0, r0, c0, c0, 4 @ MPUIR + ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU + beq __error_p + + ldr r4, [r6, #MPU_RNG_INFO_USED] + mov r5, #MPU_RNG_SIZE + add r3, r6, #MPU_RNG_INFO_RNGS + mla r3, r4, r5, r3 + +1: + tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified + sub r3, r3, #MPU_RNG_SIZE + sub r4, r4, #1 + + set_region_nr r0, r4 + isb + + ldr r0, [r3, #MPU_RGN_DRBAR] + ldr r6, [r3, #MPU_RGN_DRSR] + ldr r5, [r3, #MPU_RGN_DRACR] + + setup_region r0, r5, r6, MPU_DATA_SIDE + beq 2f + setup_region r0, r5, r6, MPU_INSTR_SIDE +2: isb + + mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR + cmp r4, #0 + bgt 1b /* Enable the MPU */ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR - bic r0, r0, #CR_BR @ Disable the 'default mem-map' + bic r0, r0, #CR_BR @ Disable the 'default mem-map' orr r0, r0, #CR_M @ Set SCTRL.M (MPU on) mcr p15, 0, r0, c1, c0, 0 @ Enable MPU isb + ret lr -ENDPROC(__setup_mpu) -#endif +ENDPROC(__secondary_setup_mpu) + +#endif /* CONFIG_SMP */ +#endif /* CONFIG_ARM_MPU */ #include "head-common.S" diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 8e9a3e40d949567598cfdcc8146823f5ada96cb2..fc40a2b40595bef5411d2d948a06774a0d78b2b7 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -1069,6 +1069,16 @@ void __init setup_arch(char **cmdline_p) mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type); + if (!mdesc) { + early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n"); + early_print(" r1=0x%08x, r2=0x%08x\n", __machine_arch_type, + __atags_pointer); + if (__atags_pointer) + early_print(" r2[]=%*ph\n", 16, + phys_to_virt(__atags_pointer)); + dump_machine_table(); + } + machine_desc = mdesc; machine_name = mdesc->name; dump_stack_set_arch_desc("%s", mdesc->name); diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index b67ae12503f30c3ba113f1d8c7a943d17e9db717..bd8810d4acb393b78ee186a8719526d463eebc8b 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -19,11 +19,12 @@ #include #include #include -#include #include #include -extern const unsigned long sigreturn_codes[7]; +#include "signal.h" + +extern const unsigned long sigreturn_codes[17]; static unsigned long signal_return_offset; @@ -172,15 +173,6 @@ static int restore_vfp_context(char __user **auxp) /* * Do a signal return; undo the signal stack. These are aligned to 64-bit. */ -struct sigframe { - struct ucontext uc; - unsigned long retcode[2]; -}; - -struct rt_sigframe { - struct siginfo info; - struct sigframe sig; -}; static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf) { @@ -366,9 +358,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, unsigned long __user *rc, void __user *frame) { unsigned long handler = (unsigned long)ksig->ka.sa.sa_handler; + unsigned long handler_fdpic_GOT = 0; unsigned long retcode; - int thumb = 0; + unsigned int idx, thumb = 0; unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT); + bool fdpic = IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC) && + (current->personality & FDPIC_FUNCPTRS); + + if (fdpic) { + unsigned long __user *fdpic_func_desc = + (unsigned long __user *)handler; + if (__get_user(handler, &fdpic_func_desc[0]) || + __get_user(handler_fdpic_GOT, &fdpic_func_desc[1])) + return 1; + } cpsr |= PSR_ENDSTATE; @@ -408,9 +411,26 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, if (ksig->ka.sa.sa_flags & SA_RESTORER) { retcode = (unsigned long)ksig->ka.sa.sa_restorer; + if (fdpic) { + /* + * We need code to load the function descriptor. + * That code follows the standard sigreturn code + * (6 words), and is made of 3 + 2 words for each + * variant. The 4th copied word is the actual FD + * address that the assembly code expects. + */ + idx = 6 + thumb * 3; + if (ksig->ka.sa.sa_flags & SA_SIGINFO) + idx += 5; + if (__put_user(sigreturn_codes[idx], rc ) || + __put_user(sigreturn_codes[idx+1], rc+1) || + __put_user(sigreturn_codes[idx+2], rc+2) || + __put_user(retcode, rc+3)) + return 1; + goto rc_finish; + } } else { - unsigned int idx = thumb << 1; - + idx = thumb << 1; if (ksig->ka.sa.sa_flags & SA_SIGINFO) idx += 3; @@ -422,6 +442,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, __put_user(sigreturn_codes[idx+1], rc+1)) return 1; +rc_finish: #ifdef CONFIG_MMU if (cpsr & MODE32_BIT) { struct mm_struct *mm = current->mm; @@ -441,7 +462,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, * the return code written onto the stack. */ flush_icache_range((unsigned long)rc, - (unsigned long)(rc + 2)); + (unsigned long)(rc + 3)); retcode = ((unsigned long)rc) + thumb; } @@ -451,6 +472,8 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, regs->ARM_sp = (unsigned long)frame; regs->ARM_lr = retcode; regs->ARM_pc = handler; + if (fdpic) + regs->ARM_r9 = handler_fdpic_GOT; regs->ARM_cpsr = cpsr; return 0; diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h new file mode 100644 index 0000000000000000000000000000000000000000..b7b838b05229aa5cd702611013cdae97fa033b07 --- /dev/null +++ b/arch/arm/kernel/signal.h @@ -0,0 +1,11 @@ +#include + +struct sigframe { + struct ucontext uc; + unsigned long retcode[4]; +}; + +struct rt_sigframe { + struct siginfo info; + struct sigframe sig; +}; diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S index b84d0cb13682ccd42e41a22894cb8d2c1821496d..2c7b22e32152825d2d035fb760ef961c6c4d141e 100644 --- a/arch/arm/kernel/sigreturn_codes.S +++ b/arch/arm/kernel/sigreturn_codes.S @@ -14,6 +14,8 @@ * GNU General Public License for more details. */ +#include +#include #include /* @@ -51,6 +53,17 @@ ARM_OK( .arm ) .thumb .endm + .macro arm_fdpic_slot n + .org sigreturn_codes + 24 + 20 * (\n) +ARM_OK( .arm ) + .endm + + .macro thumb_fdpic_slot n + .org sigreturn_codes + 24 + 20 * (\n) + 12 + .thumb + .endm + + #if __LINUX_ARM_ARCH__ <= 4 /* * Note we manually set minimally required arch that supports @@ -90,13 +103,46 @@ ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) swi #0 + /* ARM sigreturn restorer FDPIC bounce code snippet */ + arm_fdpic_slot 0 +ARM_OK( ldr r3, [sp, #SIGFRAME_RC3_OFFSET] ) +ARM_OK( ldmia r3, {r3, r9} ) +#ifdef CONFIG_ARM_THUMB +ARM_OK( bx r3 ) +#else +ARM_OK( ret r3 ) +#endif + + /* Thumb sigreturn restorer FDPIC bounce code snippet */ + thumb_fdpic_slot 0 + ldr r3, [sp, #SIGFRAME_RC3_OFFSET] + ldmia r3, {r2, r3} + mov r9, r3 + bx r2 + + /* ARM sigreturn_rt restorer FDPIC bounce code snippet */ + arm_fdpic_slot 1 +ARM_OK( ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET] ) +ARM_OK( ldmia r3, {r3, r9} ) +#ifdef CONFIG_ARM_THUMB +ARM_OK( bx r3 ) +#else +ARM_OK( ret r3 ) +#endif + + /* Thumb sigreturn_rt restorer FDPIC bounce code snippet */ + thumb_fdpic_slot 1 + ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET] + ldmia r3, {r2, r3} + mov r9, r3 + bx r2 + /* - * Note on addtional space: setup_return in signal.c - * algorithm uses two words copy regardless whether - * it is thumb case or not, so we need additional - * word after real last entry. + * Note on additional space: setup_return in signal.c + * always copies the same number of words regardless whether + * it is thumb case or not, so we need one additional padding + * word after the last entry. */ - arm_slot 2 .space 4 .size sigreturn_codes, . - sigreturn_codes diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index c9a0a529982793ef85bbde11ec646579cd2a7d18..b4fbf00ee4ad527d256c20f055540ae74b8c2b9f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -114,7 +114,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; #ifdef CONFIG_ARM_MPU - secondary_data.mpu_rgn_szr = mpu_rgn_info.rgns[MPU_RAM_REGION].drsr; + secondary_data.mpu_rgn_info = &mpu_rgn_info; #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 72f9241ad5dba5eb42fe7d5e5e31be456a96ad97..c6b33074c39311795716e8557a3e8862d4a051f3 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -21,6 +21,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) #define SCU_CONFIG 0x04 #define SCU_CPU_STATUS 0x08 +#define SCU_CPU_STATUS_MASK GENMASK(1, 0) #define SCU_INVALIDATE 0x0c #define SCU_FPGA_REVISION 0x10 @@ -72,6 +73,24 @@ void scu_enable(void __iomem *scu_base) } #endif +static int scu_set_power_mode_internal(void __iomem *scu_base, + unsigned int logical_cpu, + unsigned int mode) +{ + unsigned int val; + int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0); + + if (mode > 3 || mode == 1 || cpu > 3) + return -EINVAL; + + val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu); + val &= ~SCU_CPU_STATUS_MASK; + val |= mode; + writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu); + + return 0; +} + /* * Set the executing CPUs power mode as defined. This will be in * preparation for it executing a WFI instruction. @@ -81,16 +100,28 @@ void scu_enable(void __iomem *scu_base) * flushed. Interrupts must also have been disabled. */ int scu_power_mode(void __iomem *scu_base, unsigned int mode) +{ + return scu_set_power_mode_internal(scu_base, smp_processor_id(), mode); +} + +/* + * Set the given (logical) CPU's power mode to SCU_PM_NORMAL. + */ +int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu) +{ + return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL); +} + +int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu) { unsigned int val; - int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0); + int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0); - if (mode > 3 || mode == 1 || cpu > 3) + if (cpu > 3) return -EINVAL; - val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu) & ~0x03; - val |= mode; - writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu); + val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu); + val &= SCU_CPU_STATUS_MASK; - return 0; + return val; } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 0fcd82f013883c58229aa8647d50047af010dde2..5cf04888c581df4a21053a826f8a2fdd58204435 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -655,6 +655,9 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) set_tls(regs->ARM_r0); return 0; + case NR(get_tls): + return current_thread_info()->tp_value[0]; + default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 0951df916b8577cec288aefd78e204827397b364..ec4b3f94ad8071e779974dbd55f7843af175df3d 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -7,6 +7,8 @@ /* No __ro_after_init data in the .rodata section - which will always be ro */ #define RO_AFTER_INIT_DATA +#include + #include #include #include @@ -78,9 +80,7 @@ SECTIONS *(.text.fixup) *(__ex_table) #endif -#ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) -#endif *(.discard) *(.discard.*) } @@ -182,19 +182,7 @@ SECTIONS *(.taglist.init) __tagtable_end = .; } -#ifdef CONFIG_SMP_ON_UP - .init.smpalt : { - __smpalt_begin = .; - *(.alt.smp.init) - __smpalt_end = .; - } -#endif - .init.pv_table : { - __pv_table_begin = .; - *(.pv_table) - __pv_table_end = .; - } - .init.data : { + .init.rodata : { INIT_SETUP(16) INIT_CALLS CON_INITCALL @@ -202,48 +190,49 @@ SECTIONS INIT_RAM_FS } -#ifdef CONFIG_SMP - PERCPU_SECTION(L1_CACHE_BYTES) +#ifdef CONFIG_ARM_MPU + . = ALIGN(SZ_128K); #endif - _exiprom = .; /* End of XIP ROM area */ - __data_loc = ALIGN(4); /* location in binary */ - . = PAGE_OFFSET + TEXT_OFFSET; - .data : AT(__data_loc) { - _data = .; /* address in memory */ - _sdata = .; - - /* - * first, the init task union, aligned - * to an 8192 byte boundary. - */ - INIT_TASK_DATA(THREAD_SIZE) +/* + * From this point, stuff is considered writable and will be copied to RAM + */ + __data_loc = ALIGN(4); /* location in file */ + . = PAGE_OFFSET + TEXT_OFFSET; /* location in memory */ +#undef LOAD_OFFSET +#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc) + + . = ALIGN(THREAD_SIZE); + _sdata = .; + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) { + *(.data..ro_after_init) + } + _edata = .; - . = ALIGN(PAGE_SIZE); - __init_begin = .; + . = ALIGN(PAGE_SIZE); + __init_begin = .; + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA + } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { ARM_EXIT_KEEP(EXIT_DATA) - . = ALIGN(PAGE_SIZE); - __init_end = .; - - *(.data..ro_after_init) - - NOSAVE_DATA - CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) - READ_MOSTLY_DATA(L1_CACHE_BYTES) - - /* - * and the usual data section - */ - DATA_DATA - CONSTRUCTORS - - _edata = .; } - _edata_loc = __data_loc + SIZEOF(.data); +#ifdef CONFIG_SMP + PERCPU_SECTION(L1_CACHE_BYTES) +#endif + + /* + * End of copied data. We need a dummy section to get its LMA. + * Also located before final ALIGN() as trailing padding is not stored + * in the resulting binary file and useless to copy. + */ + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { } + _edata_loc = LOADADDR(.data.endmark); - BUG_TABLE + . = ALIGN(PAGE_SIZE); + __init_end = .; #ifdef CONFIG_HAVE_TCM /* @@ -302,7 +291,7 @@ SECTIONS } #endif - BSS_SECTION(0, 0, 0) + BSS_SECTION(0, 0, 8) _end = .; STABS_DEBUG @@ -323,3 +312,29 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") */ ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, "HYP init code too big or misaligned") + +#ifdef CONFIG_XIP_DEFLATED_DATA +/* + * The .bss is used as a stack area for __inflate_kernel_data() whose stack + * frame is 9568 bytes. Make sure it has extra room left. + */ +ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA") +#endif + +#ifdef CONFIG_ARM_MPU +/* + * Due to PMSAv7 restriction on base address and size we have to + * enforce minimal alignment restrictions. It was seen that weaker + * alignment restriction on _xiprom will likely force XIP address + * space spawns multiple MPU regions thus it is likely we run in + * situation when we are reprogramming MPU region we run on with + * something which doesn't cover reprogramming code itself, so as soon + * as we update MPU settings we'd immediately try to execute straight + * from background region which is XN. + * It seem that alignment in 1M should suit most users. + * _exiprom is aligned as 1/8 of 1M so can be covered by subregion + * disable + */ +ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues") +ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues") +#endif diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 1845a5affb44290934ac15084aad0603a20cf36c..ee53f65188724b07c517d36a8bb0763d3b5acf17 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -215,14 +215,9 @@ SECTIONS *(.pv_table) __pv_table_end = .; } - .init.data : { - INIT_DATA - INIT_SETUP(16) - INIT_CALLS - CON_INITCALL - SECURITY_INITCALL - INIT_RAM_FS - } + + INIT_DATA_SECTION(16) + .exit.data : { ARM_EXIT_KEEP(EXIT_DATA) } @@ -237,33 +232,10 @@ SECTIONS . = ALIGN(THREAD_SIZE); #endif __init_end = .; - __data_loc = .; - - .data : AT(__data_loc) { - _data = .; /* address in memory */ - _sdata = .; - - /* - * first, the init task union, aligned - * to an 8192 byte boundary. - */ - INIT_TASK_DATA(THREAD_SIZE) - - NOSAVE_DATA - CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) - READ_MOSTLY_DATA(L1_CACHE_BYTES) - - /* - * and the usual data section - */ - DATA_DATA - CONSTRUCTORS - - _edata = .; - } - _edata_loc = __data_loc + SIZEOF(.data); - BUG_TABLE + _sdata = .; + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + _edata = .; #ifdef CONFIG_HAVE_TCM /* diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index 30a13647c54c6ef3bcf01b3db27892e929cd8e4e..cdff963f133a189e848929d831a5e88b9fb270d7 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -165,143 +165,6 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) * Inject exceptions into the guest */ -static u32 exc_vector_base(struct kvm_vcpu *vcpu) -{ - u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); - u32 vbar = vcpu_cp15(vcpu, c12_VBAR); - - if (sctlr & SCTLR_V) - return 0xffff0000; - else /* always have security exceptions */ - return vbar; -} - -/* - * Switch to an exception mode, updating both CPSR and SPSR. Follow - * the logic described in AArch32.EnterMode() from the ARMv8 ARM. - */ -static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode) -{ - unsigned long cpsr = *vcpu_cpsr(vcpu); - u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR); - - *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode; - - switch (mode) { - case FIQ_MODE: - *vcpu_cpsr(vcpu) |= PSR_F_BIT; - /* Fall through */ - case ABT_MODE: - case IRQ_MODE: - *vcpu_cpsr(vcpu) |= PSR_A_BIT; - /* Fall through */ - default: - *vcpu_cpsr(vcpu) |= PSR_I_BIT; - } - - *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT); - - if (sctlr & SCTLR_TE) - *vcpu_cpsr(vcpu) |= PSR_T_BIT; - if (sctlr & SCTLR_EE) - *vcpu_cpsr(vcpu) |= PSR_E_BIT; - - /* Note: These now point to the mode banked copies */ - *vcpu_spsr(vcpu) = cpsr; -} - -/** - * kvm_inject_undefined - inject an undefined exception into the guest - * @vcpu: The VCPU to receive the undefined exception - * - * It is assumed that this code is called from the VCPU thread and that the - * VCPU therefore is not currently executing guest code. - * - * Modelled after TakeUndefInstrException() pseudocode. - */ -void kvm_inject_undefined(struct kvm_vcpu *vcpu) -{ - unsigned long cpsr = *vcpu_cpsr(vcpu); - bool is_thumb = (cpsr & PSR_T_BIT); - u32 vect_offset = 4; - u32 return_offset = (is_thumb) ? 2 : 4; - - kvm_update_psr(vcpu, UND_MODE); - *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset; - - /* Branch to exception vector */ - *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset; -} - -/* - * Modelled after TakeDataAbortException() and TakePrefetchAbortException - * pseudocode. - */ -static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) -{ - u32 vect_offset; - u32 return_offset = (is_pabt) ? 4 : 8; - bool is_lpae; - - kvm_update_psr(vcpu, ABT_MODE); - *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset; - - if (is_pabt) - vect_offset = 12; - else - vect_offset = 16; - - /* Branch to exception vector */ - *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset; - - if (is_pabt) { - /* Set IFAR and IFSR */ - vcpu_cp15(vcpu, c6_IFAR) = addr; - is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); - /* Always give debug fault for now - should give guest a clue */ - if (is_lpae) - vcpu_cp15(vcpu, c5_IFSR) = 1 << 9 | 0x22; - else - vcpu_cp15(vcpu, c5_IFSR) = 2; - } else { /* !iabt */ - /* Set DFAR and DFSR */ - vcpu_cp15(vcpu, c6_DFAR) = addr; - is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31); - /* Always give debug fault for now - should give guest a clue */ - if (is_lpae) - vcpu_cp15(vcpu, c5_DFSR) = 1 << 9 | 0x22; - else - vcpu_cp15(vcpu, c5_DFSR) = 2; - } - -} - -/** - * kvm_inject_dabt - inject a data abort into the guest - * @vcpu: The VCPU to receive the undefined exception - * @addr: The address to report in the DFAR - * - * It is assumed that this code is called from the VCPU thread and that the - * VCPU therefore is not currently executing guest code. - */ -void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) -{ - inject_abt(vcpu, false, addr); -} - -/** - * kvm_inject_pabt - inject a prefetch abort into the guest - * @vcpu: The VCPU to receive the undefined exception - * @addr: The address to report in the DFAR - * - * It is assumed that this code is called from the VCPU thread and that the - * VCPU therefore is not currently executing guest code. - */ -void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) -{ - inject_abt(vcpu, true, addr); -} - /** * kvm_inject_vabt - inject an async abort / SError into the guest * @vcpu: The VCPU to receive the exception diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c index ebd2dd46adf7f991d7131eb55873a5e916010a8d..330c9ce34ba5f68ceb7907d9a41415d598fd0b0a 100644 --- a/arch/arm/kvm/hyp/switch.c +++ b/arch/arm/kvm/hyp/switch.c @@ -174,7 +174,7 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu) __activate_vm(vcpu); __vgic_restore_state(vcpu); - __timer_restore_state(vcpu); + __timer_enable_traps(vcpu); __sysreg_restore_state(guest_ctxt); __banked_restore_state(guest_ctxt); @@ -191,7 +191,8 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu) __banked_save_state(guest_ctxt); __sysreg_save_state(guest_ctxt); - __timer_save_state(vcpu); + __timer_disable_traps(vcpu); + __vgic_save_state(vcpu); __deactivate_traps(vcpu); @@ -237,7 +238,7 @@ void __hyp_text __noreturn __hyp_panic(int cause) vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR); host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); - __timer_save_state(vcpu); + __timer_disable_traps(vcpu); __deactivate_traps(vcpu); __deactivate_vm(vcpu); __banked_restore_state(host_ctxt); diff --git a/arch/arm/mach-actions/Makefile b/arch/arm/mach-actions/Makefile index c0f116241da72b46608d3fedbcca4e5dbc6e2c90..13831037d8cdf51d8604b706c39a567358ec5895 100644 --- a/arch/arm/mach-actions/Makefile +++ b/arch/arm/mach-actions/Makefile @@ -1,3 +1 @@ -obj-${CONFIG_SMP} += platsmp.o headsmp.o - -AFLAGS_headsmp.o := -Wa,-march=armv7-a +obj-${CONFIG_SMP} += platsmp.o diff --git a/arch/arm/mach-actions/headsmp.S b/arch/arm/mach-actions/headsmp.S deleted file mode 100644 index 65f53bdb69e7f13d5b392d46e55a7213dca983ff..0000000000000000000000000000000000000000 --- a/arch/arm/mach-actions/headsmp.S +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2012 Actions Semi Inc. - * Author: Actions Semi, Inc. - * - * Copyright (c) 2017 Andreas Färber - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include - -ENTRY(owl_v7_invalidate_l1) - mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp< + +static const char * const bcm_hr2_dt_compat[] __initconst = { + "brcm,hr2", + NULL, +}; + +DT_MACHINE_START(BCM_HR2_DT, "Broadcom Hurricane 2 SoC") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .dt_compat = bcm_hr2_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 0c1edfc98696da0e0bb7f4a18cdfbcdd27a9795d..8cff865ace04bf1c900676ebdacce9342d0f5036 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -15,15 +15,11 @@ #include #include #include -#include #include #include -static void __init bcm2835_init(void) -{ - bcm2835_init_clocks(); -} +#include "platsmp.h" static const char * const bcm2835_compat[] = { #ifdef CONFIG_ARCH_MULTI_V6 @@ -31,11 +27,12 @@ static const char * const bcm2835_compat[] = { #endif #ifdef CONFIG_ARCH_MULTI_V7 "brcm,bcm2836", + "brcm,bcm2837", #endif NULL }; DT_MACHINE_START(BCM2835, "BCM2835") - .init_machine = bcm2835_init, - .dt_compat = bcm2835_compat + .dt_compat = bcm2835_compat, + .smp = smp_ops(bcm2836_smp_ops), MACHINE_END diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 9e3f275934eb412f14947bf40ae2cec0f785bcc0..7d954830eb57644e36d80b3ab17cb1778d208337 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -287,6 +288,38 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle) return ret; } +static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + void __iomem *intc_base; + struct device_node *dn; + char *name; + + name = "brcm,bcm2836-l1-intc"; + dn = of_find_compatible_node(NULL, NULL, name); + if (!dn) { + pr_err("unable to find intc node\n"); + return -ENODEV; + } + + intc_base = of_iomap(dn, 0); + of_node_put(dn); + + if (!intc_base) { + pr_err("unable to remap intc base register\n"); + return -ENOMEM; + } + + writel(virt_to_phys(secondary_startup), + intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu); + + dsb(sy); + sev(); + + iounmap(intc_base); + + return 0; +} + static const struct smp_operations kona_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = kona_boot_secondary, @@ -305,3 +338,8 @@ static const struct smp_operations nsp_smp_ops __initconst = { .smp_boot_secondary = nsp_boot_secondary, }; CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops); + +const struct smp_operations bcm2836_smp_ops __initconst = { + .smp_boot_secondary = bcm2836_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops); diff --git a/arch/arm/mach-bcm/platsmp.h b/arch/arm/mach-bcm/platsmp.h new file mode 100644 index 0000000000000000000000000000000000000000..b8b8b3fa350d4d49911270d1f1fb983db587d0ef --- /dev/null +++ b/arch/arm/mach-bcm/platsmp.h @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2017 Stefan Wahren + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + */ + +extern const struct smp_operations bcm2836_smp_ops; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 5699ce39e64f70d9b2ca34865daaaa08f4325a43..f06db6700ab26acfa2ea7d0a9bb3ff1c626a0c9b 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -54,6 +54,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL), OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL), OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL), + OF_DEV_AUXDATA("ti,da850-dsp", 0x11800000, "davinci-rproc.0", NULL), {} }; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f53c6181399868ad232f3dcea8173349d6e76a93..e70feec6fad5e296b869d76e90d31bf5b71d1334 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include @@ -320,42 +320,47 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) /************************************************************************* * EP93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data ep93xx_i2c_data; + +/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ +static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + /* Use local offsets on gpiochip/port "G" */ + GPIO_LOOKUP_IDX("G", 1, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("G", 0, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; static struct platform_device ep93xx_i2c_device = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &ep93xx_i2c_data, + .platform_data = NULL, }, }; /** * ep93xx_register_i2c - Register the i2c platform device. - * @data: platform specific i2c-gpio configuration (__initdata) * @devices: platform specific i2c bus device information (__initdata) * @num: the number of devices on the i2c bus */ -void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num) +void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) { /* - * Set the EEPROM interface pin drive type control. - * Defines the driver type for the EECLK and EEDAT pins as either - * open drain, which will require an external pull-up, or a normal - * CMOS driver. + * FIXME: this just sets the two pins as non-opendrain, as no + * platforms tries to do that anyway. Flag the applicable lines + * as open drain in the GPIO_LOOKUP above and the driver or + * gpiolib will handle open drain/open drain emulation as need + * be. Right now i2c-gpio emulates open drain which is not + * optimal. */ - if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) - pr_warning("sda != EEDAT, open drain has no effect\n"); - if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) - pr_warning("scl != EECLK, open drain has no effect\n"); - - __raw_writel((data->sda_is_open_drain << 1) | - (data->scl_is_open_drain << 0), + __raw_writel((0 << 1) | (0 << 0), EP93XX_GPIO_EEDRIVE); - ep93xx_i2c_data = *data; i2c_register_board_info(0, devices, num); + gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); platform_device_register(&ep93xx_i2c_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 7a7f280b07d75af54b6fec1e32b84384a3c6ad25..8e89ec8b6f0ff535eab78436c44f75fa92ff581e 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include @@ -61,14 +60,6 @@ static struct ep93xx_eth_data __initdata edb93xx_eth_data = { /************************************************************************* * EDB93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, /* default to 100 kHz */ - .timeout = 0, /* default to 100 ms */ -}; static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { { @@ -86,13 +77,11 @@ static void __init edb93xx_register_i2c(void) { if (machine_is_edb9302a() || machine_is_edb9307a() || machine_is_edb9315a()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xxa_i2c_board_info, + ep93xx_register_i2c(edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9302() || machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xx_i2c_board_info, + ep93xx_register_i2c(edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 3bbe1591013e019837cef8524067867c0f6b613b..6c41c794bed50ee4ce4a5ae0b567d94afb60c5bc 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -8,7 +8,6 @@ #include struct device; -struct i2c_gpio_platform_data; struct i2c_board_info; struct spi_board_info; struct platform_device; @@ -37,8 +36,7 @@ void ep93xx_register_flash(unsigned int width, resource_size_t start, resource_size_t size); void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num); +void ep93xx_register_i2c(struct i2c_board_info *devices, int num); void ep93xx_register_spi(struct ep93xx_spi_info *info, struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index c7a40f245892885b403621e40bb33b4405111d5d..41aa5758135665a53e73387509ace6eb76d03ecb 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -43,60 +42,12 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = { .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; -/* - * GPIO lines used for MMC card detection. - */ -#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0 - -/* - * MMC card detection GPIO setup. - */ - -static int simone_mmc_spi_init(struct device *dev, - irqreturn_t (*irq_handler)(int, void *), void *mmc) -{ - unsigned int gpio = MMC_CARD_DETECT_GPIO; - int irq, err; - - err = gpio_request(gpio, dev_name(dev)); - if (err) - return err; - - err = gpio_direction_input(gpio); - if (err) - goto fail; - - irq = gpio_to_irq(gpio); - if (irq < 0) - goto fail; - - err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING, - "MMC card detect", mmc); - if (err) - goto fail; - - printk(KERN_INFO "%s: using irq %d for MMC card detection\n", - dev_name(dev), irq); - - return 0; -fail: - gpio_free(gpio); - return err; -} - -static void simone_mmc_spi_exit(struct device *dev, void *mmc) -{ - unsigned int gpio = MMC_CARD_DETECT_GPIO; - - free_irq(gpio_to_irq(gpio), mmc); - gpio_free(gpio); -} - static struct mmc_spi_platform_data simone_mmc_spi_data = { - .init = simone_mmc_spi_init, - .exit = simone_mmc_spi_exit, .detect_delay = 500, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .flags = MMC_SPI_USE_CD_GPIO, + .cd_gpio = EP93XX_GPIO_LINE_EGPIO0, + .cd_debounce = 1, }; static struct spi_board_info simone_spi_devices[] __initdata = { @@ -129,15 +80,6 @@ static struct ep93xx_spi_info simone_spi_info __initdata = { .use_dma = 1, }; -static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata simone_i2c_board_info[] = { { I2C_BOARD_INFO("ds1337", 0x68), @@ -161,7 +103,7 @@ static void __init simone_init_machine(void) ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&simone_eth_data, 1); ep93xx_register_fb(&simone_fb_info); - ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, + ep93xx_register_i2c(simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); ep93xx_register_spi(&simone_spi_info, simone_spi_devices, ARRAY_SIZE(simone_spi_devices)); diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 8b29398f4dc7c78e76d25a092159a8ba59cc539a..45940c1d778789f3b76a5e465c787ab05b22682f 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -127,15 +126,6 @@ static struct ep93xx_eth_data __initdata snappercl15_eth_data = { .phy_id = 1, }; -static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata snappercl15_i2c_data[] = { { /* Audio codec */ @@ -161,7 +151,7 @@ static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); ep93xx_register_eth(&snappercl15_eth_data, 1); - ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, + ep93xx_register_i2c(snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); snappercl15_register_audio(); diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 8745162ec05d3a887f940ecd84a0d90d2e736eca..f386ebae0163cbbe00cf34776db7517a43ea2ac1 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -18,7 +18,10 @@ #include #include #include +#include +#include +#include #include #include @@ -186,24 +189,22 @@ static struct platform_device ts72xx_rtc_device = { .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), }; +/************************************************************************* + * Watchdog (in CPLD) + *************************************************************************/ +#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000) +#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000) + static struct resource ts72xx_wdt_resources[] = { - { - .start = TS72XX_WDT_CONTROL_PHYS_BASE, - .end = TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = TS72XX_WDT_FEED_PHYS_BASE, - .end = TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01), + DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01), }; static struct platform_device ts72xx_wdt_device = { .name = "ts72xx-wdt", .id = -1, - .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), .resource = ts72xx_wdt_resources, + .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), }; static struct ep93xx_eth_data __initdata ts72xx_eth_data = { @@ -232,6 +233,27 @@ static struct platform_device ts73xx_fpga_device = { #endif +/************************************************************************* + * SPI Bus + *************************************************************************/ +static struct spi_board_info ts72xx_spi_devices[] __initdata = { + { + .modalias = "tmp122", + .max_speed_hz = 2 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static int ts72xx_spi_chipselects[] __initdata = { + EP93XX_GPIO_LINE_F(2), /* DIO_17 */ +}; + +static struct ep93xx_spi_info ts72xx_spi_info __initdata = { + .chipselect = ts72xx_spi_chipselects, + .num_chipselect = ARRAY_SIZE(ts72xx_spi_chipselects), +}; + static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); @@ -244,6 +266,8 @@ static void __init ts72xx_init_machine(void) if (board_is_ts7300()) platform_device_register(&ts73xx_fpga_device); #endif + ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, + ARRAY_SIZE(ts72xx_spi_devices)); } MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h index b89850f1a965103945d3e3e960a1fdd2de63580b..8a3206a54b39de86223bf1a16e378ae7166f367f 100644 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ b/arch/arm/mach-ep93xx/ts72xx.h @@ -39,9 +39,6 @@ #define TS72XX_OPTIONS2_TS9420 0x04 #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_WDT_CONTROL_PHYS_BASE 0x23800000 -#define TS72XX_WDT_FEED_PHYS_BASE 0x23c00000 - #ifndef __ASSEMBLY__ static inline int ts72xx_model(void) diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 1daf9441058c8ded557463daad4f7dcef44381bd..5a0b6187990a9b56497e5d58a0aa9247676b29bf 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -144,10 +143,6 @@ static struct pca953x_platform_data pca953x_77_gpio_data = { /************************************************************************* * I2C Bus *************************************************************************/ -static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .scl_pin = EP93XX_GPIO_LINE_EECLK, -}; static struct i2c_board_info vision_i2c_info[] __initdata = { { @@ -289,7 +284,7 @@ static void __init vision_init_machine(void) vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); - ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, + ep93xx_register_i2c(vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, ARRAY_SIZE(vision_spi_board_info)); diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0a99140b6ba28d8960ec48fd68b9782aa37541d3..44fa753bd79cfdd2bd2729c638baf1ac8f96d220 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -85,11 +85,6 @@ config CPU_EXYNOS4210 default y depends on ARCH_EXYNOS4 -config SOC_EXYNOS4212 - bool "SAMSUNG EXYNOS4212" - default y - depends on ARCH_EXYNOS4 - config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9424a8a9f30892fd69cdf07d768130edf82f98ff..3f715524c9d6e05a29b9ae15c9a99dcac56807a0 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -18,7 +18,6 @@ #define EXYNOS3_SOC_MASK 0xFFFFF000 #define EXYNOS4210_CPU_ID 0x43210000 -#define EXYNOS4212_CPU_ID 0x43220000 #define EXYNOS4412_CPU_ID 0xE4412200 #define EXYNOS4_CPU_MASK 0xFFFE0000 @@ -39,7 +38,6 @@ static inline int is_samsung_##name(void) \ IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK) IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK) @@ -59,12 +57,6 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos4210() 0 #endif -#if defined(CONFIG_SOC_EXYNOS4212) -# define soc_is_exynos4212() is_samsung_exynos4212() -#else -# define soc_is_exynos4212() 0 -#endif - #if defined(CONFIG_SOC_EXYNOS4412) # define soc_is_exynos4412() is_samsung_exynos4412() #else @@ -105,8 +97,7 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5800() 0 #endif -#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ - soc_is_exynos4412()) +#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4412()) #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \ soc_is_exynos5420() || soc_is_exynos5800()) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index c404c15ad07fea8a93dafae7629289124c03505b..9a9caac1125a25e4cae07c27cb1f807e2f594a61 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -195,7 +195,6 @@ static void __init exynos_dt_machine_init(void) exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; #endif if (of_machine_is_compatible("samsung,exynos4210") || - of_machine_is_compatible("samsung,exynos4212") || (of_machine_is_compatible("samsung,exynos4412") && of_machine_is_compatible("samsung,trats2")) || of_machine_is_compatible("samsung,exynos3250") || @@ -208,7 +207,6 @@ static char const *const exynos_dt_compat[] __initconst = { "samsung,exynos3250", "samsung,exynos4", "samsung,exynos4210", - "samsung,exynos4212", "samsung,exynos4412", "samsung,exynos5", "samsung,exynos5250", diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index e81a78b125d98af5f76568bb72f701400c45c2a9..2a51e4603a6f425d5d00f3364ad4a7e14f40f8c9 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -70,12 +70,7 @@ static int exynos_cpu_boot(int cpu) /* * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. - * But, Exynos4212 has only one secondary CPU so second parameter - * isn't used for informing secure firmware about CPU id. */ - if (soc_is_exynos4212()) - cpu = 0; - exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); return 0; } diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 1a7e5b5d08d83234ff58a6a75d6e0c777f0be9c6..c9740d96db9e1c37e754ff912f88372baaee97ce 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -167,8 +167,7 @@ void exynos_enter_aftr(void) exynos_pm_central_suspend(); - if (of_machine_is_compatible("samsung,exynos4212") || - of_machine_is_compatible("samsung,exynos4412")) { + if (of_machine_is_compatible("samsung,exynos4412")) { /* Setting SEQ_OPTION register */ pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, S5P_CENTRAL_SEQ_OPTION); diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index b529ba04ed16656aeefc80eb5a4bb95119b6753d..370d37ded7e7a12c1dc0e39d414c2778788d2bbc 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -225,7 +225,6 @@ static int __init exynos_pmu_irq_init(struct device_node *node, EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu"); EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu"); -EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu"); EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu"); EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu"); EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu"); @@ -616,9 +615,6 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = { }, { .compatible = "samsung,exynos4210-pmu", .data = &exynos4_pm_data, - }, { - .compatible = "samsung,exynos4212-pmu", - .data = &exynos4_pm_data, }, { .compatible = "samsung,exynos4412-pmu", .data = &exynos4_pm_data, diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index cda330c93d610d35d3e82e9d9574d6611dc489d4..0015abe9cb2b460e3ded0e84e06bad8d362de41c 100644 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -20,7 +20,7 @@ #include #include #include - +#include "3ds_debugboard.h" #include "hardware.h" /* LAN9217 ethernet base address */ diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c index 3feca526d16b8f1171b445563956be84ce830deb..db0127606aedac65f61cbcf9e326cebfdeca7964 100644 --- a/arch/arm/mach-imx/cpuidle-imx5.c +++ b/arch/arm/mach-imx/cpuidle-imx5.c @@ -9,6 +9,7 @@ #include #include #include +#include "cpuidle.h" static int imx5_cpuidle_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 45801b27ee5ced633fae6a7c6ca238cf203f0056..7d80a0ae723cb6660585cfeb6bdcaa3982d490b9 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -286,101 +286,20 @@ static void __init imx6q_init_machine(void) imx6q_axi_init(); } -#define OCOTP_CFG3 0x440 -#define OCOTP_CFG3_SPEED_SHIFT 16 -#define OCOTP_CFG3_SPEED_1P2GHZ 0x3 -#define OCOTP_CFG3_SPEED_996MHZ 0x2 -#define OCOTP_CFG3_SPEED_852MHZ 0x1 - -static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev) -{ - struct device_node *np; - void __iomem *base; - u32 val; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp"); - if (!np) { - pr_warn("failed to find ocotp node\n"); - return; - } - - base = of_iomap(np, 0); - if (!base) { - pr_warn("failed to map ocotp\n"); - goto put_node; - } - - /* - * SPEED_GRADING[1:0] defines the max speed of ARM: - * 2b'11: 1200000000Hz; - * 2b'10: 996000000Hz; - * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. - * 2b'00: 792000000Hz; - * We need to set the max speed of ARM according to fuse map. - */ - val = readl_relaxed(base + OCOTP_CFG3); - val >>= OCOTP_CFG3_SPEED_SHIFT; - val &= 0x3; - - if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && cpu_is_imx6q()) - if (dev_pm_opp_disable(cpu_dev, 1200000000)) - pr_warn("failed to disable 1.2 GHz OPP\n"); - if (val < OCOTP_CFG3_SPEED_996MHZ) - if (dev_pm_opp_disable(cpu_dev, 996000000)) - pr_warn("failed to disable 996 MHz OPP\n"); - if (cpu_is_imx6q()) { - if (val != OCOTP_CFG3_SPEED_852MHZ) - if (dev_pm_opp_disable(cpu_dev, 852000000)) - pr_warn("failed to disable 852 MHz OPP\n"); - } - iounmap(base); -put_node: - of_node_put(np); -} - -static void __init imx6q_opp_init(void) -{ - struct device_node *np; - struct device *cpu_dev = get_cpu_device(0); - - if (!cpu_dev) { - pr_warn("failed to get cpu0 device\n"); - return; - } - np = of_node_get(cpu_dev->of_node); - if (!np) { - pr_warn("failed to find cpu0 node\n"); - return; - } - - if (dev_pm_opp_of_add_table(cpu_dev)) { - pr_warn("failed to init OPP table\n"); - goto put_node; - } - - imx6q_opp_check_speed_grading(cpu_dev); - -put_node: - of_node_put(np); -} - -static struct platform_device imx6q_cpufreq_pdev = { - .name = "imx6q-cpufreq", -}; - static void __init imx6q_init_late(void) { /* - * WAIT mode is broken on TO 1.0 and 1.1, so there is no point - * to run cpuidle on them. + * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so + * there is no point to run cpuidle on them. + * + * It does work on imx6 Solo/DualLite starting from 1.1 */ - if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) + if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) || + (cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0)) imx6q_cpuidle_init(); - if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) { - imx6q_opp_init(); - platform_device_register(&imx6q_cpufreq_pdev); - } + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) + platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } static void __init imx6q_map_io(void) diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index f033a57d56942442f1b7041be14887a9189fe688..a3250bc7f1148fc59c11f3c378051ad950dc253b 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -245,7 +245,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = { /* * Set up static virtual mappings. */ -void __init mx31lite_map_io(void) +static void __init mx31lite_map_io(void) { mx31_map_io(); iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index 1e91a0918e8341220f16adea31c01cccba57e980..3c224f41e68ed4027494db30d4c9f01257f4e842 100644 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -22,6 +22,7 @@ #include +#include "board-mx31moboard.h" #include "common.h" #include "devices-imx31.h" #include "ehci.h" diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index 922d49175cb45fd611af7e7096be795d0624626a..9a5a869be1aecf1889f4e56e26d9833a398e9d4c 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -24,6 +24,7 @@ #include +#include "board-mx31moboard.h" #include "common.h" #include "devices-imx31.h" #include "ehci.h" diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index a5a4470db482b6be9eb12a87627bfd0bb6ed4c33..71b97ffe8d32c23b8c81a4d989bf3746573aa5a7 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -8,6 +8,4 @@ obj-y := core.o lm.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o - -obj-$(CONFIG_PCI) += pci_v3.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index a1af634f87096e2053b86b356052306760e564b9..8efe484fac139d8b4d9f004f18dce130fee6e2ae 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -36,7 +36,6 @@ #include "hardware.h" #include "cm.h" #include "common.h" -#include "pci_v3.h" #include "lm.h" /* Regmap to the AP system controller */ @@ -74,7 +73,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); - pci_v3_early_init(); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c deleted file mode 100644 index 2565f0e7b5cff9b99e84e9cf043c786f2122f044..0000000000000000000000000000000000000000 --- a/arch/arm/mach-integrator/pci_v3.c +++ /dev/null @@ -1,900 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/pci_v3.c - * - * PCI functions for V3 host PCI bridge - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include