Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 84c48e6f authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix oops on unaligned user access
  avr32: Add support for Mediama RMTx add-on board for ATNGW100
  avr32: Change Atmel ATNGW100 config to add choice of add-on board
  Fix MIMC200 board LCD init
  avr32: Fix clash in ATMEL_USART_ flags
  avr32: remove obsolete hw_interrupt_type
  avr32: Solves problem with inverted MCI detect pin on Merisc board
  atmel-mci: Add support for inverted detect pin
parents 5c55b40b bb6e6470

arch/avr32/boards/atngw100/Kconfig

+25 −2
Original line number Diff line number Diff line
@@ -2,8 +2,15 @@ 


if BOARD_ATNGW100



choice

	prompt "Select an NGW100 add-on board to support"

	default BOARD_ATNGW100_ADDON_NONE



config BOARD_ATNGW100_ADDON_NONE

	bool "None"



config BOARD_ATNGW100_EVKLCD10X

	bool "Add support for EVKLCD10X addon board"

	bool "EVKLCD10X addon board"

	help

	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)

	  addon board for the NGW100. By enabling this the LCD controller and
@@ -14,7 +21,19 @@ config BOARD_ATNGW100_EVKLCD10X 
	  The MCI pins can be reenabled by editing the "add device function" but

	  this may break the setup for other displays that use these pins.



	  Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.

config BOARD_ATNGW100_MRMT

	bool "Mediama RMT1/2 add-on board"

	help

	  This enables support for the Mediama RMT1 or RMT2 board.

	  RMT provides LCD support, AC97 codec and other

	  optional peripherals to the Atmel NGW100.



	  This choice disables the detect pin and the write-protect pin for the

	  MCI platform device, since it conflicts with the LCD platform device.

	  The MCI pins can be reenabled by editing the "add device function" but

	  this may break the setup for other displays that use these pins.



endchoice



choice

	prompt "LCD panel resolution on EVKLCD10X"
@@ -32,4 +51,8 @@ config BOARD_ATNGW100_EVKLCD10X_POW_QVGA 


endchoice



if BOARD_ATNGW100_MRMT

source	"arch/avr32/boards/atngw100/Kconfig_mrmt"

endif



endif	# BOARD_ATNGW100

arch/avr32/boards/atngw100/Kconfig_mrmt

0 → 100644
+80 −0
Original line number Diff line number Diff line 
# RMT for NGW100 customization



choice

	prompt "RMT Version"

	help

	  Select the RMTx board version.



config BOARD_MRMT_REV1

	bool "RMT1"

config BOARD_MRMT_REV2

	bool "RMT2"



endchoice



config BOARD_MRMT_AC97

	bool "Enable AC97 CODEC"

	help

	  Enable the UCB1400 AC97 CODEC driver.



choice

	prompt "Touchscreen Driver"

	default BOARD_MRMT_ADS7846_TS



config BOARD_MRMT_UCB1400_TS

	bool "Use UCB1400 Touchscreen"



config BOARD_MRMT_ADS7846_TS

	bool "Use ADS7846 Touchscreen"



endchoice



choice

	prompt "RMTx LCD Selection"

	default BOARD_MRMT_LCD_DISABLE



config BOARD_MRMT_LCD_DISABLE

	bool "LCD Disabled"



config BOARD_MRMT_LCD_LQ043T3DX0X

	bool "Sharp LQ043T3DX0x or compatible"

	help

	  If using RMT2, be sure to load the resistor pack selectors accordingly



if BOARD_MRMT_REV2

config BOARD_MRMT_LCD_KWH043GM08

	bool "Formike KWH043GM08 or compatible"

	help

	  Be sure to load the RMT2 resistor pack selectors accordingly

endif



endchoice



if !BOARD_MRMT_LCD_DISABLE

config BOARD_MRMT_BL_PWM

	bool "Use PWM control for LCD Backlight"

	help

		Use PWM driver for controlling LCD Backlight.

		Otherwise, LCD Backlight is always on.

endif



config BOARD_MRMT_RTC_I2C

	bool "Use External RTC on I2C Bus"

	help

		RMT1 has an optional RTC device on the I2C bus.

		It is a SII S35390A.  Be sure to select the

		matching RTC driver.



choice

	prompt "Wireless Module on ttyS2"

	default BOARD_MRMT_WIRELESS_ZB



config BOARD_MRMT_WIRELESS_ZB

	bool "Use ZigBee/802.15.4 Module"



config BOARD_MRMT_WIRELESS_BT

	bool "Use Bluetooth (HCI) Module"



config BOARD_MRMT_WIRELESS_NONE

	bool "Not Installed"

endchoice

arch/avr32/boards/atngw100/Makefile

+1 −0
Original line number Diff line number Diff line 
obj-y					+= setup.o flash.o

obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o

obj-$(CONFIG_BOARD_ATNGW100_MRMT)	+= mrmt.o

arch/avr32/boards/atngw100/mrmt.c

0 → 100644
+373 −0
Original line number Diff line number Diff line 
/*

 * Board-specific setup code for Remote Media Terminal 1 (RMT1)

 * add-on board for the ATNGW100 Network Gateway

 *

 * Copyright (C) 2008 Mediama Technologies

 * Based on ATNGW100 Network Gateway (Copyright (C) Atmel)

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

#include <linux/gpio.h>

#include <linux/init.h>

#include <linux/irq.h>

#include <linux/linkage.h>

#include <linux/platform_device.h>

#include <linux/types.h>

#include <linux/fb.h>

#include <linux/leds.h>

#include <linux/input.h>

#include <linux/gpio_keys.h>

#include <linux/atmel_serial.h>

#include <linux/spi/spi.h>

#include <linux/spi/ads7846.h>



#include <video/atmel_lcdc.h>

#include <sound/atmel-ac97c.h>



#include <asm/delay.h>

#include <asm/io.h>

#include <asm/setup.h>



#include <mach/at32ap700x.h>

#include <mach/board.h>

#include <mach/init.h>

#include <mach/portmux.h>



/* Define board-specifoic GPIO assignments */

#define PIN_LCD_BL	GPIO_PIN_PA(28)

#define PWM_CH_BL	0	/* Must match with GPIO pin definition */

#define PIN_LCD_DISP	GPIO_PIN_PA(31)

#define	PIN_AC97_RST_N	GPIO_PIN_PA(30)

#define PB_EXTINT_BASE	25

#define TS_IRQ		0

#define PIN_TS_EXTINT	GPIO_PIN_PB(PB_EXTINT_BASE+TS_IRQ)

#define PIN_PB_LEFT	GPIO_PIN_PB(11)

#define PIN_PB_RIGHT	GPIO_PIN_PB(12)

#define PIN_PWR_SW_N	GPIO_PIN_PB(14)

#define PIN_PWR_ON	GPIO_PIN_PB(13)

#define PIN_ZB_RST_N	GPIO_PIN_PA(21)

#define PIN_BT_RST	GPIO_PIN_PA(22)

#define PIN_LED_SYS	GPIO_PIN_PA(16)

#define PIN_LED_A	GPIO_PIN_PA(19)

#define PIN_LED_B	GPIO_PIN_PE(19)



#ifdef CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X

/* Sharp LQ043T3DX0x (or compatible) panel */

static struct fb_videomode __initdata lcd_fb_modes[] = {

	{

		.name		= "480x272 @ 59.94Hz",

		.refresh	= 59.94,

		.xres		= 480,		.yres		= 272,

		.pixclock	= KHZ2PICOS(9000),



		.left_margin	= 2,		.right_margin	= 2,

		.upper_margin	= 3,		.lower_margin	= 9,

		.hsync_len	= 41,		.vsync_len	= 1,



		.sync		= 0,

		.vmode		= FB_VMODE_NONINTERLACED,

	},

};



static struct fb_monspecs __initdata lcd_fb_default_monspecs = {

	.manufacturer		= "SHA",

	.monitor		= "LQ043T3DX02",

	.modedb			= lcd_fb_modes,

	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),

	.hfmin			= 14915,

	.hfmax			= 17638,

	.vfmin			= 53,

	.vfmax			= 61,

	.dclkmax		= 9260000,

};



static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {

	.default_bpp		= 24,

	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,

	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT

				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE

				   | ATMEL_LCDC_INVCLK_NORMAL

				   | ATMEL_LCDC_MEMOR_BIG),

	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,

	.default_monspecs	= &lcd_fb_default_monspecs,

	.guard_time		= 2,

};

#endif



#ifdef CONFIG_BOARD_MRMT_LCD_KWH043GM08

/* Sharp KWH043GM08-Fxx (or compatible) panel */

static struct fb_videomode __initdata lcd_fb_modes[] = {

	{

		.name		= "480x272 @ 59.94Hz",

		.refresh	= 59.94,

		.xres		= 480,		.yres		= 272,

		.pixclock	= KHZ2PICOS(9000),



		.left_margin	= 2,		.right_margin	= 2,

		.upper_margin	= 3,		.lower_margin	= 9,

		.hsync_len	= 41,		.vsync_len	= 1,



		.sync		= 0,

		.vmode		= FB_VMODE_NONINTERLACED,

	},

};



static struct fb_monspecs __initdata lcd_fb_default_monspecs = {

	.manufacturer		= "FOR",

	.monitor		= "KWH043GM08",

	.modedb			= lcd_fb_modes,

	.modedb_len		= ARRAY_SIZE(lcd_fb_modes),

	.hfmin			= 14915,

	.hfmax			= 17638,

	.vfmin			= 53,

	.vfmax			= 61,

	.dclkmax		= 9260000,

};



static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {

	.default_bpp		= 24,

	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,

	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT

				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE

				   | ATMEL_LCDC_INVCLK_INVERTED

				   | ATMEL_LCDC_MEMOR_BIG),

	.lcd_wiring_mode	= ATMEL_LCDC_WIRING_RGB,

	.default_monspecs	= &lcd_fb_default_monspecs,

	.guard_time		= 2,

};

#endif



#ifdef CONFIG_BOARD_MRMT_AC97

static struct ac97c_platform_data __initdata ac97c0_data = {

	.reset_pin		= PIN_AC97_RST_N,

};

#endif



#ifdef CONFIG_BOARD_MRMT_UCB1400_TS

/* NOTE: IRQ assignment relies on kernel module parameter */

static struct platform_device rmt_ts_device = {

	.name	= "ucb1400_ts",

	.id	= -1,

	}

};

#endif



#ifdef CONFIG_BOARD_MRMT_BL_PWM

/* PWM LEDs: LCD Backlight, etc */

static struct gpio_led rmt_pwm_led[] = {

	/* here the "gpio" is actually a PWM channel */

	{ .name = "backlight",	.gpio = PWM_CH_BL, },

};



static struct gpio_led_platform_data rmt_pwm_led_data = {

	.num_leds	= ARRAY_SIZE(rmt_pwm_led),

	.leds		= rmt_pwm_led,

};



static struct platform_device rmt_pwm_led_dev = {

	.name		= "leds-atmel-pwm",

	.id		= -1,

	.dev		= {

		.platform_data	= &rmt_pwm_led_data,

	},

};

#endif



#ifdef CONFIG_BOARD_MRMT_ADS7846_TS

static int ads7846_pendown_state(void)

{

	return !gpio_get_value( PIN_TS_EXTINT );	/* PENIRQ.*/

}



static struct ads7846_platform_data ads_info = {

	.model				= 7846,

	.keep_vref_on			= 0,	/* Use external VREF pin */

	.vref_delay_usecs		= 0,

	.vref_mv			= 3300,	/* VREF = 3.3V */

	.settle_delay_usecs		= 800,

	.penirq_recheck_delay_usecs	= 800,

	.x_plate_ohms			= 750,

	.y_plate_ohms			= 300,

	.pressure_max			= 4096,

	.debounce_max			= 1,

	.debounce_rep			= 0,

	.debounce_tol			= (~0),

	.get_pendown_state		= ads7846_pendown_state,

	.filter				= NULL,

	.filter_init			= NULL,

};



static struct spi_board_info spi01_board_info[] __initdata = {

	{

		.modalias	= "ads7846",

		.max_speed_hz	= 31250*26,

		.bus_num	= 0,

		.chip_select	= 1,

		.platform_data	= &ads_info,

		.irq		= AT32_EXTINT(TS_IRQ),

	},

};

#endif



/* GPIO Keys: left, right, power, etc */

static const struct gpio_keys_button rmt_gpio_keys_buttons[] = {

	[0] = {

		.type		= EV_KEY,

		.code		= KEY_POWER,

		.gpio		= PIN_PWR_SW_N,

		.active_low	= 1,

		.desc		= "power button",

	},

	[1] = {

		.type		= EV_KEY,

		.code		= KEY_LEFT,

		.gpio		= PIN_PB_LEFT,

		.active_low	= 1,

		.desc		= "left button",

	},

	[2] = {

		.type		= EV_KEY,

		.code		= KEY_RIGHT,

		.gpio		= PIN_PB_RIGHT,

		.active_low	= 1,

		.desc		= "right button",

	},

};



static const struct gpio_keys_platform_data rmt_gpio_keys_data = {

	.nbuttons =	ARRAY_SIZE(rmt_gpio_keys_buttons),

	.buttons =	(void *) rmt_gpio_keys_buttons,

};



static struct platform_device rmt_gpio_keys = {

	.name =		"gpio-keys",

	.id =		-1,

	.dev = {

		.platform_data = (void *) &rmt_gpio_keys_data,

	}

};



#ifdef CONFIG_BOARD_MRMT_RTC_I2C

static struct i2c_board_info __initdata mrmt1_i2c_rtc = {

	I2C_BOARD_INFO("s35390a", 0x30),

	.irq		= 0,

};

#endif



static void mrmt_power_off(void)

{

	/* PWR_ON=0 will force power off */

	gpio_set_value( PIN_PWR_ON, 0 );

}



static int __init mrmt1_init(void)

{

	gpio_set_value( PIN_PWR_ON, 1 );	/* Ensure PWR_ON is enabled */



	pm_power_off = mrmt_power_off;



	/* Setup USARTS (other than console) */

	at32_map_usart(2, 1, 0);	/* USART 2: /dev/ttyS1, RMT1:DB9M */

	at32_map_usart(3, 2, ATMEL_USART_RTS | ATMEL_USART_CTS);

			/* USART 3: /dev/ttyS2, RMT1:Wireless, w/ RTS/CTS */

	at32_add_device_usart(1);

	at32_add_device_usart(2);



	/* Select GPIO Key pins */

	at32_select_gpio( PIN_PWR_SW_N, AT32_GPIOF_DEGLITCH);

	at32_select_gpio( PIN_PB_LEFT, AT32_GPIOF_DEGLITCH);

	at32_select_gpio( PIN_PB_RIGHT, AT32_GPIOF_DEGLITCH);

	platform_device_register(&rmt_gpio_keys);



#ifdef CONFIG_BOARD_MRMT_RTC_I2C

	i2c_register_board_info(0, &mrmt1_i2c_rtc, 1);

#endif



#ifndef CONFIG_BOARD_MRMT_LCD_DISABLE

	/* User "alternate" LCDC inferface on Port E & D */

	/* NB: exclude LCDC_CC pin, as NGW100 reserves it for other use */

	at32_add_device_lcdc(0, &rmt_lcdc_data,

		fbmem_start, fbmem_size,

		(ATMEL_LCDC_ALT_24BIT | ATMEL_LCDC_PE_DVAL ) );

#endif



#ifdef CONFIG_BOARD_MRMT_AC97

	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);

#endif



#ifdef CONFIG_BOARD_MRMT_ADS7846_TS

	/* Select the Touchscreen interrupt pin mode */

	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),

			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);

	set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );

	spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));

#endif



#ifdef CONFIG_BOARD_MRMT_UCB1400_TS

	/* Select the Touchscreen interrupt pin mode */

	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),

			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);

	platform_device_register(&rmt_ts_device);

#endif



	at32_select_gpio( PIN_LCD_DISP, AT32_GPIOF_OUTPUT );

	gpio_request( PIN_LCD_DISP, "LCD_DISP" );

	gpio_direction_output( PIN_LCD_DISP, 0 );	/* LCD DISP */

#ifdef CONFIG_BOARD_MRMT_LCD_DISABLE

	/* Keep Backlight and DISP off */

	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );

	gpio_request( PIN_LCD_BL, "LCD_BL" );

	gpio_direction_output( PIN_LCD_BL, 0 );		/* Backlight */

#else

	gpio_set_value( PIN_LCD_DISP, 1 );	/* DISP asserted first */

#ifdef CONFIG_BOARD_MRMT_BL_PWM

	/* Use PWM for Backlight controls */

	at32_add_device_pwm(1 << PWM_CH_BL);

	platform_device_register(&rmt_pwm_led_dev);

#else

	/* Backlight always on */

	udelay( 1 );

	at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );

	gpio_request( PIN_LCD_BL, "LCD_BL" );

	gpio_direction_output( PIN_LCD_BL, 1 );

#endif

#endif



	/* Make sure BT and Zigbee modules in reset */

	at32_select_gpio( PIN_BT_RST, AT32_GPIOF_OUTPUT );

	gpio_request( PIN_BT_RST, "BT_RST" );

	gpio_direction_output( PIN_BT_RST, 1 );

	/* BT Module in Reset */



	at32_select_gpio( PIN_ZB_RST_N, AT32_GPIOF_OUTPUT );

	gpio_request( PIN_ZB_RST_N, "ZB_RST_N" );

	gpio_direction_output( PIN_ZB_RST_N, 0 );

	/* XBee Module in Reset */



#ifdef CONFIG_BOARD_MRMT_WIRELESS_ZB

	udelay( 1000 );

	/* Unreset the XBee Module */

	gpio_set_value( PIN_ZB_RST_N, 1 );

#endif

#ifdef CONFIG_BOARD_MRMT_WIRELESS_BT

	udelay( 1000 );

	/* Unreset the BT Module */

	gpio_set_value( PIN_BT_RST, 0 );

#endif



	return 0;

}

arch_initcall(mrmt1_init);



static int __init mrmt1_early_init(void)

{

	/* To maintain power-on signal in case boot loader did not already */

	at32_select_gpio( PIN_PWR_ON, AT32_GPIOF_OUTPUT );

	gpio_request( PIN_PWR_ON, "PIN_PWR_ON" );

	gpio_direction_output( PIN_PWR_ON, 1 );



	return 0;

}

core_initcall(mrmt1_early_init);

arch/avr32/boards/atngw100/setup.c

+5 −0
Original line number Diff line number Diff line
@@ -56,8 +56,13 @@ static struct spi_board_info spi0_board_info[] __initdata = { 
static struct mci_platform_data __initdata mci0_data = {

	.slot[0] = {

		.bus_width	= 4,

#if defined(CONFIG_BOARD_ATNGW100_EVKLCD10X) || defined(CONFIG_BOARD_ATNGW100_MRMT1)

		.detect_pin     = GPIO_PIN_NONE,

		.wp_pin         = GPIO_PIN_NONE,

#else

		.detect_pin	= GPIO_PIN_PC(25),

		.wp_pin		= GPIO_PIN_PE(0),

#endif

	},

};