Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6e01b20b authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller
Browse files

tg3: Consilidate MAC loopback code



The driver puts the device into MAC loopback in two places in the
driver.  This patch consolidates the code into a single routine.

Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2215e24c
Loading
Loading
Loading
Loading
+51 −40
Original line number Diff line number Diff line
@@ -94,7 +94,6 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits)
	__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
#define DRV_MODULE_RELDATE	"May 18, 2011"

#define TG3_DEF_MAC_MODE	0
#define TG3_DEF_RX_MODE		0
#define TG3_DEF_TX_MODE		0
#define TG3_DEF_MSG_ENABLE	  \
@@ -6343,6 +6342,34 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
	return NETDEV_TX_OK;
}

static void tg3_mac_loopback(struct tg3 *tp, bool enable)
{
	if (enable) {
		tp->mac_mode &= ~(MAC_MODE_HALF_DUPLEX |
				  MAC_MODE_PORT_MODE_MASK);

		tp->mac_mode |= MAC_MODE_PORT_INT_LPBACK;

		if (!tg3_flag(tp, 5705_PLUS))
			tp->mac_mode |= MAC_MODE_LINK_POLARITY;

		if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
			tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
		else
			tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
	} else {
		tp->mac_mode &= ~MAC_MODE_PORT_INT_LPBACK;

		if (tg3_flag(tp, 5705_PLUS) ||
		    (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) ||
		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
			tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
	}

	tw32(MAC_MODE, tp->mac_mode);
	udelay(40);
}

static void tg3_set_loopback(struct net_device *dev, u32 features)
{
	struct tg3 *tp = netdev_priv(dev);
@@ -6351,16 +6378,8 @@ static void tg3_set_loopback(struct net_device *dev, u32 features)
		if (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)
			return;

		/*
		 * Clear MAC_MODE_HALF_DUPLEX or you won't get packets back in
		 * loopback mode if Half-Duplex mode was negotiated earlier.
		 */
		tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;

		/* Enable internal MAC loopback mode */
		tp->mac_mode |= MAC_MODE_PORT_INT_LPBACK;
		spin_lock_bh(&tp->lock);
		tw32(MAC_MODE, tp->mac_mode);
		tg3_mac_loopback(tp, true);
		netif_carrier_on(tp->dev);
		spin_unlock_bh(&tp->lock);
		netdev_info(dev, "Internal MAC loopback mode enabled.\n");
@@ -6368,10 +6387,8 @@ static void tg3_set_loopback(struct net_device *dev, u32 features)
		if (!(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
			return;

		/* Disable internal MAC loopback mode */
		tp->mac_mode &= ~MAC_MODE_PORT_INT_LPBACK;
		spin_lock_bh(&tp->lock);
		tw32(MAC_MODE, tp->mac_mode);
		tg3_mac_loopback(tp, false);
		/* Force link status check */
		tg3_setup_phy(tp, 1);
		spin_unlock_bh(&tp->lock);
@@ -11269,27 +11286,7 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
	}
	coal_now = tnapi->coal_now | rnapi->coal_now;

	if (loopback_mode == TG3_MAC_LOOPBACK) {
		/* HW errata - mac loopback fails in some cases on 5780.
		 * Normal traffic and PHY loopback are not affected by
		 * errata.  Also, the MAC loopback test is deprecated for
		 * all newer ASIC revisions.
		 */
		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
		    tg3_flag(tp, CPMU_PRESENT))
			return 0;

		mac_mode = tp->mac_mode &
			   ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
		mac_mode |= MAC_MODE_PORT_INT_LPBACK;
		if (!tg3_flag(tp, 5705_PLUS))
			mac_mode |= MAC_MODE_LINK_POLARITY;
		if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
			mac_mode |= MAC_MODE_PORT_MODE_MII;
		else
			mac_mode |= MAC_MODE_PORT_MODE_GMII;
		tw32(MAC_MODE, mac_mode);
	} else {
	if (loopback_mode != TG3_MAC_LOOPBACK) {
		if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
			tg3_phy_fet_toggle_apd(tp, false);
			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
@@ -11554,12 +11551,26 @@ static int tg3_test_loopback(struct tg3 *tp)
	if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
		tg3_phy_toggle_apd(tp, false);

	/* HW errata - mac loopback fails in some cases on 5780.
	 * Normal traffic and PHY loopback are not affected by
	 * errata.  Also, the MAC loopback test is deprecated for
	 * all newer ASIC revisions.
	 */
	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 &&
	    !tg3_flag(tp, CPMU_PRESENT)) {
		tg3_mac_loopback(tp, true);

		if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_MAC_LOOPBACK))
		err |= TG3_STD_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
			err |= TG3_STD_LOOPBACK_FAILED <<
			       TG3_MAC_LOOPBACK_SHIFT;

		if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
		    tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_MAC_LOOPBACK))
		err |= TG3_JMB_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
			err |= TG3_JMB_LOOPBACK_FAILED <<
			       TG3_MAC_LOOPBACK_SHIFT;

		tg3_mac_loopback(tp, false);
	}

	if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
	    !tg3_flag(tp, USE_PHYLIB)) {
@@ -14335,7 +14346,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
	if (tg3_flag(tp, ENABLE_APE))
		tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
	else
		tp->mac_mode = TG3_DEF_MAC_MODE;
		tp->mac_mode = 0;

	/* these are limited to 10/100 only */
	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&