Loading arch/arm/boot/dts/orion5x.dtsi +53 −53 Original line number Original line Diff line number Diff line Loading @@ -42,6 +42,25 @@ interrupts = <6>, <7>, <8>, <9>; interrupts = <6>, <7>, <8>, <9>; }; }; spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; cell-index = <0>; reg = <0x10600 0x28>; status = "disabled"; }; i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <5>; clock-frequency = <100000>; status = "disabled"; }; serial@12000 { serial@12000 { compatible = "ns16550a"; compatible = "ns16550a"; reg = <0x12000 0x100>; reg = <0x12000 0x100>; Loading @@ -60,15 +79,6 @@ status = "disabled"; status = "disabled"; }; }; spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; cell-index = <0>; reg = <0x10600 0x28>; status = "disabled"; }; wdt@20300 { wdt@20300 { compatible = "marvell,orion-wdt"; compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; reg = <0x20300 0x28>; Loading @@ -82,30 +92,6 @@ status = "disabled"; status = "disabled"; }; }; ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; interrupts = <12>; status = "disabled"; }; sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <29>; status = "disabled"; }; i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <5>; clock-frequency = <100000>; status = "disabled"; }; xor@60900 { xor@60900 { compatible = "marvell,orion-xor"; compatible = "marvell,orion-xor"; reg = <0x60900 0x100 reg = <0x60900 0x100 Loading @@ -125,26 +111,6 @@ }; }; }; }; crypto@90000 { compatible = "marvell,orion-crypto"; reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; mdio: mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x72004 0x84>; interrupts = <22>; status = "disabled"; /* add phy nodes in board file */ }; eth: ethernet-controller@72000 { eth: ethernet-controller@72000 { compatible = "marvell,orion-eth"; compatible = "marvell,orion-eth"; #address-cells = <1>; #address-cells = <1>; Loading @@ -162,5 +128,39 @@ /* set phy-handle property in board file */ /* set phy-handle property in board file */ }; }; }; }; mdio: mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x72004 0x84>; interrupts = <22>; status = "disabled"; /* add phy nodes in board file */ }; sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <29>; status = "disabled"; }; crypto@90000 { compatible = "marvell,orion-crypto"; reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; interrupts = <12>; status = "disabled"; }; }; }; }; }; Loading
arch/arm/boot/dts/orion5x.dtsi +53 −53 Original line number Original line Diff line number Diff line Loading @@ -42,6 +42,25 @@ interrupts = <6>, <7>, <8>, <9>; interrupts = <6>, <7>, <8>, <9>; }; }; spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; cell-index = <0>; reg = <0x10600 0x28>; status = "disabled"; }; i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <5>; clock-frequency = <100000>; status = "disabled"; }; serial@12000 { serial@12000 { compatible = "ns16550a"; compatible = "ns16550a"; reg = <0x12000 0x100>; reg = <0x12000 0x100>; Loading @@ -60,15 +79,6 @@ status = "disabled"; status = "disabled"; }; }; spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; cell-index = <0>; reg = <0x10600 0x28>; status = "disabled"; }; wdt@20300 { wdt@20300 { compatible = "marvell,orion-wdt"; compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; reg = <0x20300 0x28>; Loading @@ -82,30 +92,6 @@ status = "disabled"; status = "disabled"; }; }; ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; interrupts = <12>; status = "disabled"; }; sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <29>; status = "disabled"; }; i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <5>; clock-frequency = <100000>; status = "disabled"; }; xor@60900 { xor@60900 { compatible = "marvell,orion-xor"; compatible = "marvell,orion-xor"; reg = <0x60900 0x100 reg = <0x60900 0x100 Loading @@ -125,26 +111,6 @@ }; }; }; }; crypto@90000 { compatible = "marvell,orion-crypto"; reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; mdio: mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x72004 0x84>; interrupts = <22>; status = "disabled"; /* add phy nodes in board file */ }; eth: ethernet-controller@72000 { eth: ethernet-controller@72000 { compatible = "marvell,orion-eth"; compatible = "marvell,orion-eth"; #address-cells = <1>; #address-cells = <1>; Loading @@ -162,5 +128,39 @@ /* set phy-handle property in board file */ /* set phy-handle property in board file */ }; }; }; }; mdio: mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x72004 0x84>; interrupts = <22>; status = "disabled"; /* add phy nodes in board file */ }; sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <29>; status = "disabled"; }; crypto@90000 { compatible = "marvell,orion-crypto"; reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; interrupts = <12>; status = "disabled"; }; }; }; }; };