Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 60584344 authored by Harald Krapfenbauer's avatar Harald Krapfenbauer Committed by Mike Frysinger
Browse files

Blackfin: cm-bf537u: split board from cm-bf537e 



The cm-bf537u module, while similar to the cm-bf537e, is different enough
to warrant its own resources.  It has a USB controller but no PHY.

Signed-off-by: default avatarHarald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 769cfc0d

arch/blackfin/Kconfig

+4 −3
Original line number Original line Diff line number Diff line
@@ -342,8 +342,9 @@ config MEM_MT48LC64M4A2FB_7E 
config MEM_MT48LC16M16A2TG_75

config MEM_MT48LC16M16A2TG_75

	bool

	bool

	depends on (BFIN533_EZKIT || BFIN561_EZKIT \

	depends on (BFIN533_EZKIT || BFIN561_EZKIT \

		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \

		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \

		|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)

		|| BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \

		|| BFIN527_BLUETECHNIX_CM)

	default y

	default y





config MEM_MT48LC32M8A2_75

config MEM_MT48LC32M8A2_75
@@ -459,7 +460,7 @@ config VCO_MULT 
	default "45" if BFIN533_STAMP

	default "45" if BFIN533_STAMP

	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)

	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)

	default "22" if BFIN533_BLUETECHNIX_CM

	default "22" if BFIN533_BLUETECHNIX_CM

	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)

	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)

	default "20" if BFIN561_EZKIT

	default "20" if BFIN561_EZKIT

	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)

	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)

	help

	help

arch/blackfin/mach-bf537/boards/Kconfig

+9 −3
Original line number Original line Diff line number Diff line
@@ -9,11 +9,17 @@ config BFIN537_STAMP 
	help

	help

	  BF537-STAMP board support.

	  BF537-STAMP board support.





config BFIN537_BLUETECHNIX_CM

config BFIN537_BLUETECHNIX_CM_E

	bool "Bluetechnix CM-BF537"

	bool "Bluetechnix CM-BF537E"

	depends on (BF537)

	depends on (BF537)

	help

	help

	  CM-BF537 support for EVAL- and DEV-Board.

	  CM-BF537E support for EVAL- and DEV-Board.



config BFIN537_BLUETECHNIX_CM_U

	bool "Bluetechnix CM-BF537U"

	depends on (BF537)

	help

	  CM-BF537U support for EVAL- and DEV-Board.





config BFIN537_BLUETECHNIX_TCM

config BFIN537_BLUETECHNIX_TCM

	bool "Bluetechnix TCM-BF537"

	bool "Bluetechnix TCM-BF537"

arch/blackfin/mach-bf537/boards/Makefile

+2 −1
Original line number Original line Diff line number Diff line
@@ -3,7 +3,8 @@ 
#

#





obj-$(CONFIG_BFIN537_STAMP)            += stamp.o

obj-$(CONFIG_BFIN537_STAMP)            += stamp.o

obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o

obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_E) += cm_bf537e.o

obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_U) += cm_bf537u.o

obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o

obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o

obj-$(CONFIG_PNAV10)                   += pnav10.o

obj-$(CONFIG_PNAV10)                   += pnav10.o

obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
 
obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o

arch/blackfin/mach-bf537/boards/cm_bf537e.c

0 → 100644
+727 −0
Original line number Original line Diff line number Diff line 
/*

 * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c

 * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c

 * Author:       Aidan Williams <aidan@nicta.com.au>

 *

 * Created:      2005

 * Description:  Board description file

 *

 * Modified:

 *               Copyright 2005 National ICT Australia (NICTA)

 *               Copyright 2004-2006 Analog Devices Inc.

 *

 * Bugs:         Enter bugs at http://blackfin.uclinux.org/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, see the file COPYING, or write

 * to the Free Software Foundation, Inc.,

 * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

 */



#include <linux/device.h>

#include <linux/etherdevice.h>

#include <linux/platform_device.h>

#include <linux/mtd/mtd.h>

#include <linux/mtd/partitions.h>

#include <linux/mtd/physmap.h>

#include <linux/spi/spi.h>

#include <linux/spi/flash.h>

#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)

#include <linux/usb/isp1362.h>

#endif

#include <linux/ata_platform.h>

#include <linux/irq.h>

#include <asm/dma.h>

#include <asm/bfin5xx_spi.h>

#include <asm/portmux.h>

#include <asm/dpmc.h>



/*

 * Name the Board for the /proc/cpuinfo

 */

const char bfin_board_name[] = "Bluetechnix CM BF537E";



#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

/* all SPI peripherals info goes here */



#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)

static struct mtd_partition bfin_spi_flash_partitions[] = {

	{

		.name = "bootloader(spi)",

		.size = 0x00020000,

		.offset = 0,

		.mask_flags = MTD_CAP_ROM

	}, {

		.name = "linux kernel(spi)",

		.size = 0xe0000,

		.offset = 0x20000

	}, {

		.name = "file system(spi)",

		.size = 0x700000,

		.offset = 0x00100000,

	}

};



static struct flash_platform_data bfin_spi_flash_data = {

	.name = "m25p80",

	.parts = bfin_spi_flash_partitions,

	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),

	.type = "m25p64",

};



/* SPI flash chip (m25p64) */

static struct bfin5xx_spi_chip spi_flash_chip_info = {

	.enable_dma = 0,         /* use dma transfer with this chip*/

	.bits_per_word = 8,

};

#endif



#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)

/* SPI ADC chip */

static struct bfin5xx_spi_chip spi_adc_chip_info = {

	.enable_dma = 1,         /* use dma transfer with this chip*/

	.bits_per_word = 16,

};

#endif



#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)

static struct bfin5xx_spi_chip ad1836_spi_chip_info = {

	.enable_dma = 0,

	.bits_per_word = 16,

};

#endif



#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

static struct bfin5xx_spi_chip  mmc_spi_chip_info = {

	.enable_dma = 0,

	.bits_per_word = 8,

};

#endif



static struct spi_board_info bfin_spi_board_info[] __initdata = {

#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)

	{

		/* the modalias must be the same as spi device driver name */

		.modalias = "m25p80", /* Name of spi_driver for this device */

		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0, /* Framework bus number */

		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/

		.platform_data = &bfin_spi_flash_data,

		.controller_data = &spi_flash_chip_info,

		.mode = SPI_MODE_3,

	},

#endif



#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)

	{

		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */

		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0, /* Framework bus number */

		.chip_select = 1, /* Framework chip select. */

		.platform_data = NULL, /* No spi_driver specific config */

		.controller_data = &spi_adc_chip_info,

	},

#endif



#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)

	{

		.modalias = "ad1836",

		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,

		.controller_data = &ad1836_spi_chip_info,

	},

#endif



#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)

	{

		.modalias = "mmc_spi",

		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 1,

		.controller_data = &mmc_spi_chip_info,

		.mode = SPI_MODE_3,

	},

#endif

};



/* SPI (0) */

static struct resource bfin_spi0_resource[] = {

	[0] = {

		.start = SPI0_REGBASE,

		.end   = SPI0_REGBASE + 0xFF,

		.flags = IORESOURCE_MEM,

		},

	[1] = {

		.start = CH_SPI,

		.end   = CH_SPI,

		.flags = IORESOURCE_DMA,

	},

	[2] = {

		.start = IRQ_SPI,

		.end   = IRQ_SPI,

		.flags = IORESOURCE_IRQ,

	},

};



/* SPI controller data */

static struct bfin5xx_spi_master bfin_spi0_info = {

	.num_chipselect = 8,

	.enable_dma = 1,  /* master has the ability to do dma transfer */

	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},

};



static struct platform_device bfin_spi0_device = {

	.name = "bfin-spi",

	.id = 0, /* Bus number */

	.num_resources = ARRAY_SIZE(bfin_spi0_resource),

	.resource = bfin_spi0_resource,

	.dev = {

		.platform_data = &bfin_spi0_info, /* Passed to driver */

	},

};

#endif  /* spi master and devices */



#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)

static struct platform_device rtc_device = {

	.name = "rtc-bfin",

	.id   = -1,

};

#endif



#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)

static struct platform_device hitachi_fb_device = {

	.name = "hitachi-tx09",

};

#endif



#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)

#include <linux/smc91x.h>



static struct smc91x_platdata smc91x_info = {

	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,

	.leda = RPC_LED_100_10,

	.ledb = RPC_LED_TX_RX,

};



static struct resource smc91x_resources[] = {

	{

		.start = 0x20200300,

		.end = 0x20200300 + 16,

		.flags = IORESOURCE_MEM,

	}, {

		.start = IRQ_PF14,

		.end = IRQ_PF14,

		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,

		},

};



static struct platform_device smc91x_device = {

	.name = "smc91x",

	.id = 0,

	.num_resources = ARRAY_SIZE(smc91x_resources),

	.resource = smc91x_resources,

	.dev	= {

		.platform_data	= &smc91x_info,

	},

};

#endif



#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)

static struct resource isp1362_hcd_resources[] = {

	{

		.start = 0x20308000,

		.end = 0x20308000,

		.flags = IORESOURCE_MEM,

	}, {

		.start = 0x20308004,

		.end = 0x20308004,

		.flags = IORESOURCE_MEM,

	}, {

		.start = IRQ_PG15,

		.end = IRQ_PG15,

		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,

	},

};



static struct isp1362_platform_data isp1362_priv = {

	.sel15Kres = 1,

	.clknotstop = 0,

	.oc_enable = 0,

	.int_act_high = 0,

	.int_edge_triggered = 0,

	.remote_wakeup_connected = 0,

	.no_power_switching = 1,

	.power_switching_mode = 0,

};



static struct platform_device isp1362_hcd_device = {

	.name = "isp1362-hcd",

	.id = 0,

	.dev = {

		.platform_data = &isp1362_priv,

	},

	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),

	.resource = isp1362_hcd_resources,

};

#endif



#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)

static struct resource net2272_bfin_resources[] = {

	{

		.start = 0x20300000,

		.end = 0x20300000 + 0x100,

		.flags = IORESOURCE_MEM,

	}, {

		.start = IRQ_PG13,

		.end = IRQ_PG13,

		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,

	},

};



static struct platform_device net2272_bfin_device = {

	.name = "net2272",

	.id = -1,

	.num_resources = ARRAY_SIZE(net2272_bfin_resources),

	.resource = net2272_bfin_resources,

};

#endif



static struct resource bfin_gpios_resources = {

	.start = 0,

	.end   = MAX_BLACKFIN_GPIOS - 1,

	.flags = IORESOURCE_IRQ,

};



static struct platform_device bfin_gpios_device = {

	.name = "simple-gpio",

	.id = -1,

	.num_resources = 1,

	.resource = &bfin_gpios_resources,

};



#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)

static struct mtd_partition cm_partitions[] = {

	{

		.name   = "bootloader(nor)",

		.size   = 0x40000,

		.offset = 0,

	}, {

		.name   = "linux kernel(nor)",

		.size   = 0x100000,

		.offset = MTDPART_OFS_APPEND,

	}, {

		.name   = "file system(nor)",

		.size   = MTDPART_SIZ_FULL,

		.offset = MTDPART_OFS_APPEND,

	}

};



static struct physmap_flash_data cm_flash_data = {

	.width    = 2,

	.parts    = cm_partitions,

	.nr_parts = ARRAY_SIZE(cm_partitions),

};



static unsigned cm_flash_gpios[] = { GPIO_PF4 };



static struct resource cm_flash_resource[] = {

	{

		.name  = "cfi_probe",

		.start = 0x20000000,

		.end   = 0x201fffff,

		.flags = IORESOURCE_MEM,

	}, {

		.start = (unsigned long)cm_flash_gpios,

		.end   = ARRAY_SIZE(cm_flash_gpios),

		.flags = IORESOURCE_IRQ,

	}

};



static struct platform_device cm_flash_device = {

	.name          = "gpio-addr-flash",

	.id            = 0,

	.dev = {

		.platform_data = &cm_flash_data,

	},

	.num_resources = ARRAY_SIZE(cm_flash_resource),

	.resource      = cm_flash_resource,

};

#endif



#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)

#ifdef CONFIG_SERIAL_BFIN_UART0

static struct resource bfin_uart0_resources[] = {

	{

		.start = 0xFFC00400,

		.end = 0xFFC004FF,

		.flags = IORESOURCE_MEM,

	},

	{

		.start = IRQ_UART0_RX,

		.end = IRQ_UART0_RX+1,

		.flags = IORESOURCE_IRQ,

	},

	{

		.start = IRQ_UART0_ERROR,

		.end = IRQ_UART0_ERROR,

		.flags = IORESOURCE_IRQ,

	},

	{

		.start = CH_UART0_TX,

		.end = CH_UART0_TX,

		.flags = IORESOURCE_DMA,

	},

	{

		.start = CH_UART0_RX,

		.end = CH_UART0_RX,

		.flags = IORESOURCE_DMA,

	},

#ifdef CONFIG_BFIN_UART0_CTSRTS

	{

		/*

		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.

		 */

		.start = -1,

		.end = -1,

		.flags = IORESOURCE_IO,

	},

	{

		/*

		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.

		 */

		.start = -1,

		.end = -1,

		.flags = IORESOURCE_IO,

	},

#endif

};



static struct platform_device bfin_uart0_device = {

	.name = "bfin-uart",

	.id = 0,

	.num_resources = ARRAY_SIZE(bfin_uart0_resources),

	.resource = bfin_uart0_resources,

};

#endif

#ifdef CONFIG_SERIAL_BFIN_UART1

static struct resource bfin_uart1_resources[] = {

	{

		.start = 0xFFC02000,

		.end = 0xFFC020FF,

		.flags = IORESOURCE_MEM,

	},

	{

		.start = IRQ_UART1_RX,

		.end = IRQ_UART1_RX+1,

		.flags = IORESOURCE_IRQ,

	},

	{

		.start = IRQ_UART1_ERROR,

		.end = IRQ_UART1_ERROR,

		.flags = IORESOURCE_IRQ,

	},

	{

		.start = CH_UART1_TX,

		.end = CH_UART1_TX,

		.flags = IORESOURCE_DMA,

	},

	{

		.start = CH_UART1_RX,

		.end = CH_UART1_RX,

		.flags = IORESOURCE_DMA,

	},

#ifdef CONFIG_BFIN_UART1_CTSRTS

	{

		/*

		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.

		 */

		.start = -1,

		.end = -1,

		.flags = IORESOURCE_IO,

	},

	{

		/*

		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.

		 */

		.start = -1,

		.end = -1,

		.flags = IORESOURCE_IO,

	},

#endif

};



static struct platform_device bfin_uart1_device = {

	.name = "bfin-uart",

	.id = 1,

	.num_resources = ARRAY_SIZE(bfin_uart1_resources),

	.resource = bfin_uart1_resources,

};

#endif

#endif



#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)

#ifdef CONFIG_BFIN_SIR0

static struct resource bfin_sir0_resources[] = {

	{

		.start = 0xFFC00400,

		.end = 0xFFC004FF,

		.flags = IORESOURCE_MEM,

	},

	{

		.start = IRQ_UART0_RX,

		.end = IRQ_UART0_RX+1,

		.flags = IORESOURCE_IRQ,

	},

	{

		.start = CH_UART0_RX,

		.end = CH_UART0_RX+1,

		.flags = IORESOURCE_DMA,

	},

};

static struct platform_device bfin_sir0_device = {

	.name = "bfin_sir",

	.id = 0,

	.num_resources = ARRAY_SIZE(bfin_sir0_resources),

	.resource = bfin_sir0_resources,

};

#endif

#ifdef CONFIG_BFIN_SIR1

static struct resource bfin_sir1_resources[] = {

	{

		.start = 0xFFC02000,

		.end = 0xFFC020FF,

		.flags = IORESOURCE_MEM,

	},

	{

		.start = IRQ_UART1_RX,

		.end = IRQ_UART1_RX+1,

		.flags = IORESOURCE_IRQ,

	},

	{

		.start = CH_UART1_RX,

		.end = CH_UART1_RX+1,

		.flags = IORESOURCE_DMA,

	},

};

static struct platform_device bfin_sir1_device = {

	.name = "bfin_sir",

	.id = 1,

	.num_resources = ARRAY_SIZE(bfin_sir1_resources),

	.resource = bfin_sir1_resources,

};

#endif

#endif



#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)

static struct resource bfin_twi0_resource[] = {

	[0] = {

		.start = TWI0_REGBASE,

		.end   = TWI0_REGBASE,

		.flags = IORESOURCE_MEM,

	},

	[1] = {

		.start = IRQ_TWI,

		.end   = IRQ_TWI,

		.flags = IORESOURCE_IRQ,

	},

};



static struct platform_device i2c_bfin_twi_device = {

	.name = "i2c-bfin-twi",

	.id = 0,

	.num_resources = ARRAY_SIZE(bfin_twi0_resource),

	.resource = bfin_twi0_resource,

};

#endif



#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)

static struct platform_device bfin_sport0_uart_device = {

	.name = "bfin-sport-uart",

	.id = 0,

};



static struct platform_device bfin_sport1_uart_device = {

	.name = "bfin-sport-uart",

	.id = 1,

};

#endif



#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)

static struct platform_device bfin_mii_bus = {

	.name = "bfin_mii_bus",

};



static struct platform_device bfin_mac_device = {

	.name = "bfin_mac",

	.dev.platform_data = &bfin_mii_bus,

};

#endif



#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)

#define PATA_INT	IRQ_PF14



static struct pata_platform_info bfin_pata_platform_data = {

	.ioport_shift = 2,

	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,

};



static struct resource bfin_pata_resources[] = {

	{

		.start = 0x2030C000,

		.end = 0x2030C01F,

		.flags = IORESOURCE_MEM,

	},

	{

		.start = 0x2030D018,

		.end = 0x2030D01B,

		.flags = IORESOURCE_MEM,

	},

	{

		.start = PATA_INT,

		.end = PATA_INT,

		.flags = IORESOURCE_IRQ,

	},

};



static struct platform_device bfin_pata_device = {

	.name = "pata_platform",

	.id = -1,

	.num_resources = ARRAY_SIZE(bfin_pata_resources),

	.resource = bfin_pata_resources,

	.dev = {

		.platform_data = &bfin_pata_platform_data,

	}

};

#endif



static const unsigned int cclk_vlev_datasheet[] =

{

	VRPAIR(VLEV_085, 250000000),

	VRPAIR(VLEV_090, 376000000),

	VRPAIR(VLEV_095, 426000000),

	VRPAIR(VLEV_100, 426000000),

	VRPAIR(VLEV_105, 476000000),

	VRPAIR(VLEV_110, 476000000),

	VRPAIR(VLEV_115, 476000000),

	VRPAIR(VLEV_120, 500000000),

	VRPAIR(VLEV_125, 533000000),

	VRPAIR(VLEV_130, 600000000),

};



static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {

	.tuple_tab = cclk_vlev_datasheet,

	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),

	.vr_settling_time = 25 /* us */,

};



static struct platform_device bfin_dpmc = {

	.name = "bfin dpmc",

	.dev = {

		.platform_data = &bfin_dmpc_vreg_data,

	},

};



static struct platform_device *cm_bf537e_devices[] __initdata = {



	&bfin_dpmc,



#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)

	&hitachi_fb_device,

#endif



#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)

	&rtc_device,

#endif



#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)

#ifdef CONFIG_SERIAL_BFIN_UART0

	&bfin_uart0_device,

#endif

#ifdef CONFIG_SERIAL_BFIN_UART1

	&bfin_uart1_device,

#endif

#endif



#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)

#ifdef CONFIG_BFIN_SIR0

	&bfin_sir0_device,

#endif

#ifdef CONFIG_BFIN_SIR1

	&bfin_sir1_device,

#endif

#endif



#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)

	&i2c_bfin_twi_device,

#endif



#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)

	&bfin_sport0_uart_device,

	&bfin_sport1_uart_device,

#endif



#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)

	&isp1362_hcd_device,

#endif



#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)

	&smc91x_device,

#endif



#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)

	&bfin_mii_bus,

	&bfin_mac_device,

#endif



#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)

	&net2272_bfin_device,

#endif



#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

	&bfin_spi0_device,

#endif



#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)

	&bfin_pata_device,

#endif



#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)

	&cm_flash_device,

#endif



	&bfin_gpios_device,

};



static int __init cm_bf537e_init(void)

{

	printk(KERN_INFO "%s(): registering device resources\n", __func__);

	platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));

#endif



#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)

	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

#endif

	return 0;

}



arch_initcall(cm_bf537e_init);



void bfin_get_ether_addr(char *addr)

{

	random_ether_addr(addr);

	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);

}

EXPORT_SYMBOL(bfin_get_ether_addr);

arch/blackfin/mach-bf537/boards/cm_bf537.c→arch/blackfin/mach-bf537/boards/cm_bf537u.c

+9 −8
Original line number Original line Diff line number Diff line 
/*

/*

 * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c

 * File:         arch/blackfin/mach-bf537/boards/cm_bf537u.c

 * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c

 * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c

 * Author:       Aidan Williams <aidan@nicta.com.au>

 * Author:       Aidan Williams <aidan@nicta.com.au>

 *

 *
@@ -45,11 +45,12 @@ 
#include <asm/bfin5xx_spi.h>

#include <asm/bfin5xx_spi.h>

#include <asm/portmux.h>

#include <asm/portmux.h>

#include <asm/dpmc.h>

#include <asm/dpmc.h>

#include <linux/spi/mmc_spi.h>





/*

/*

 * Name the Board for the /proc/cpuinfo

 * Name the Board for the /proc/cpuinfo

 */

 */

const char bfin_board_name[] = "Bluetechnix CM BF537";

const char bfin_board_name[] = "Bluetechnix CM BF537U";





#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

/* all SPI peripherals info goes here */

/* all SPI peripherals info goes here */
@@ -318,7 +319,7 @@ static struct mtd_partition cm_partitions[] = { 
		.offset = 0,

		.offset = 0,

	}, {

	}, {

		.name   = "linux kernel(nor)",

		.name   = "linux kernel(nor)",

		.size   = 0xE0000,

		.size   = 0x100000,

		.offset = MTDPART_OFS_APPEND,

		.offset = MTDPART_OFS_APPEND,

	}, {

	}, {

		.name   = "file system(nor)",

		.name   = "file system(nor)",
@@ -333,7 +334,7 @@ static struct physmap_flash_data cm_flash_data = { 
	.nr_parts = ARRAY_SIZE(cm_partitions),

	.nr_parts = ARRAY_SIZE(cm_partitions),

};

};





static unsigned cm_flash_gpios[] = { GPIO_PF4 };

static unsigned cm_flash_gpios[] = { GPIO_PH0 };





static struct resource cm_flash_resource[] = {

static struct resource cm_flash_resource[] = {

	{

	{
@@ -542,7 +543,7 @@ static struct platform_device bfin_dpmc = { 
	},

	},

};

};





static struct platform_device *cm_bf537_devices[] __initdata = {

static struct platform_device *cm_bf537u_devices[] __initdata = {





	&bfin_dpmc,

	&bfin_dpmc,
@@ -608,10 +609,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = { 
	&bfin_gpios_device,

	&bfin_gpios_device,

};

};





static int __init cm_bf537_init(void)

static int __init cm_bf537u_init(void)

{

{

	printk(KERN_INFO "%s(): registering device resources\n", __func__);

	printk(KERN_INFO "%s(): registering device resources\n", __func__);

	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));

	platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));

	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));

#endif

#endif
@@ -622,7 +623,7 @@ static int __init cm_bf537_init(void) 
	return 0;

	return 0;

}

}





arch_initcall(cm_bf537_init);

arch_initcall(cm_bf537u_init);





void bfin_get_ether_addr(char *addr)

void bfin_get_ether_addr(char *addr)

{

{