staging: r8188eu: Add files for new driver - part 25

/******************************************************************************

 *

 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License as

 * published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for

 * more details.

 *

 * You should have received a copy of the GNU General Public License along with

 * this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA

 *

 *

 ******************************************************************************/

#ifndef __RECV_OSDEP_H_

#define __RECV_OSDEP_H_

#include <osdep_service.h>

#include <drv_types.h>

int _rtw_init_recv_priv(struct recv_priv *precvpriv, struct adapter *padapter);

void _rtw_free_recv_priv(struct recv_priv *precvpriv);

s32  rtw_recv_entry(union recv_frame *precv_frame);

int rtw_recv_indicatepkt(struct adapter *adapter, union recv_frame *recv_frame);

void rtw_recv_returnpacket(struct  net_device *cnxt, struct sk_buff *retpkt);

void rtw_hostapd_mlme_rx(struct adapter *padapter, union recv_frame *recv_fr);

void rtw_handle_tkip_mic_err(struct adapter *padapter, u8 bgroup);

int rtw_init_recv_priv(struct recv_priv *precvpriv, struct adapter *padapter);

void rtw_free_recv_priv(struct recv_priv *precvpriv);

int rtw_os_recv_resource_init(struct recv_priv *recvpr, struct adapter *adapt);

int rtw_os_recv_resource_alloc(struct adapter *adapt, union recv_frame *recvfr);

void rtw_os_recv_resource_free(struct recv_priv *precvpriv);

int rtw_os_recvbuf_resource_alloc(struct adapter *adapt, struct recv_buf *buf);

int rtw_os_recvbuf_resource_free(struct adapter *adapt, struct recv_buf *buf);

void rtw_os_read_port(struct adapter *padapter, struct recv_buf *precvbuf);

void rtw_init_recv_timer(struct recv_reorder_ctrl *preorder_ctrl);

int nat25_handle_frame(struct adapter *priv, struct sk_buff *skb);

int _netdev_open(struct net_device *pnetdev);

int netdev_open(struct net_device *pnetdev);

int netdev_close(struct net_device *pnetdev);

#endif /*  */

/******************************************************************************

 *

 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License as

 * published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for

 * more details.

 *

 * You should have received a copy of the GNU General Public License along with

 * this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA

 *

 *

 ******************************************************************************/

#ifndef __RTL8188E_CMD_H__

#define __RTL8188E_CMD_H__

enum RTL8188E_H2C_CMD_ID {

	/* Class Common */

	H2C_COM_RSVD_PAGE		= 0x00,

	H2C_COM_MEDIA_STATUS_RPT	= 0x01,

	H2C_COM_SCAN			= 0x02,

	H2C_COM_KEEP_ALIVE		= 0x03,

	H2C_COM_DISCNT_DECISION		= 0x04,

	H2C_COM_INIT_OFFLOAD		= 0x06,

	H2C_COM_REMOTE_WAKE_CTL		= 0x07,

	H2C_COM_AP_OFFLOAD		= 0x08,

	H2C_COM_BCN_RSVD_PAGE		= 0x09,

	H2C_COM_PROB_RSP_RSVD_PAGE	= 0x0A,

	/* Class PS */

	H2C_PS_PWR_MODE			= 0x20,

	H2C_PS_TUNE_PARA		= 0x21,

	H2C_PS_TUNE_PARA_2		= 0x22,

	H2C_PS_LPS_PARA			= 0x23,

	H2C_PS_P2P_OFFLOAD		= 0x24,

	/* Class DM */

	H2C_DM_MACID_CFG		= 0x40,

	H2C_DM_TXBF			= 0x41,

	/* Class BT */

	H2C_BT_COEX_MASK		= 0x60,

	H2C_BT_COEX_GPIO_MODE		= 0x61,

	H2C_BT_DAC_SWING_VAL		= 0x62,

	H2C_BT_PSD_RST			= 0x63,

	/* Class */

	 H2C_RESET_TSF			= 0xc0,

};

struct cmd_msg_parm {

	u8 eid; /* element id */

	u8 sz; /*  sz */

	u8 buf[6];

};

enum {

	PWRS

};

struct setpwrmode_parm {

	u8 Mode;/* 0:Active,1:LPS,2:WMMPS */

	u8 SmartPS_RLBM;/* LPS= 0:PS_Poll,1:PS_Poll,2:NullData,WMM= 0:PS_Poll,1:NullData */

	u8 AwakeInterval;	/*  unit: beacon interval */

	u8 bAllQueueUAPSD;

	u8 PwrState;/* AllON(0x0c),RFON(0x04),RFOFF(0x00) */

};

struct H2C_SS_RFOFF_PARAM {

	u8 ROFOn; /*  1: on, 0:off */

	u16 gpio_period; /*  unit: 1024 us */

} __packed;

struct joinbssrpt_parm {

	u8 OpMode;	/*  RT_MEDIA_STATUS */

};

struct rsvdpage_loc {

	u8 LocProbeRsp;

	u8 LocPsPoll;

	u8 LocNullData;

	u8 LocQosNull;

	u8 LocBTQosNull;

};

struct P2P_PS_Offload_t {

	u8 Offload_En:1;

	u8 role:1; /*  1: Owner, 0: Client */

	u8 CTWindow_En:1;

	u8 NoA0_En:1;

	u8 NoA1_En:1;

	u8 AllStaSleep:1; /*  Only valid in Owner */

	u8 discovery:1;

	u8 rsvd:1;

};

struct P2P_PS_CTWPeriod_t {

	u8 CTWPeriod;	/* TU */

};

/*  host message to firmware cmd */

void rtl8188e_set_FwPwrMode_cmd(struct adapter *padapter, u8 Mode);

void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *padapter, u8 mstatus);

u8 rtl8188e_set_rssi_cmd(struct adapter *padapter, u8 *param);

u8 rtl8188e_set_raid_cmd(struct adapter *padapter, u32 mask);

void rtl8188e_Add_RateATid(struct adapter *padapter, u32 bitmap, u8 arg,

			   u8 rssi_level);

#ifdef CONFIG_88EU_P2P

void rtl8188e_set_p2p_ps_offload_cmd(struct adapter *adapt, u8 p2p_ps_state);

#endif /* CONFIG_88EU_P2P */

void CheckFwRsvdPageContent(struct adapter *adapt);

void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt);

#endif/* __RTL8188E_CMD_H__ */

/******************************************************************************

 *

 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License as

 * published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for

 * more details.

 *

 * You should have received a copy of the GNU General Public License along with

 * this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA

 *

 *

 ******************************************************************************/

#ifndef __RTL8188E_DM_H__

#define __RTL8188E_DM_H__

enum{

	UP_LINK,

	DOWN_LINK,

};

/*  duplicate code,will move to ODM ######### */

#define IQK_MAC_REG_NUM		4

#define IQK_ADDA_REG_NUM		16

#define IQK_BB_REG_NUM			9

#define HP_THERMAL_NUM		8

/*  duplicate code,will move to ODM ######### */

struct	dm_priv {

	u8	DM_Type;

	u8	DMFlag;

	u8	InitDMFlag;

	u32	InitODMFlag;

	/*  Upper and Lower Signal threshold for Rate Adaptive*/

	int	UndecoratedSmoothedPWDB;

	int	UndecoratedSmoothedCCK;

	int	EntryMinUndecoratedSmoothedPWDB;

	int	EntryMaxUndecoratedSmoothedPWDB;

	int	MinUndecoratedPWDBForDM;

	int	LastMinUndecoratedPWDBForDM;

	/* for High Power */

	u8 bDynamicTxPowerEnable;

	u8 LastDTPLvl;

	u8 DynamicTxHighPowerLvl;/* Tx Power Control for Near/Far Range */

	u8	PowerIndex_backup[6];

};

void rtl8188e_init_dm_priv(struct adapter *adapt);

void rtl8188e_deinit_dm_priv(struct adapter *adapt);

void rtl8188e_InitHalDm(struct adapter *adapt);

void rtl8188e_HalDmWatchDog(struct adapter *adapt);

void AntDivCompare8188E(struct adapter *adapt, struct wlan_bssid_ex *dst,

			struct wlan_bssid_ex *src);

u8 AntDivBeforeLink8188E(struct adapter *adapt);

#endif

/******************************************************************************

 *

 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License as

 * published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for

 * more details.

 *

 * You should have received a copy of the GNU General Public License along with

 * this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA

 *

 *

 ******************************************************************************/

#ifndef __RTL8188E_HAL_H__

#define __RTL8188E_HAL_H__

/* include HAL Related header after HAL Related compiling flags */

#include "rtl8188e_spec.h"

#include "Hal8188EPhyReg.h"

#include "Hal8188EPhyCfg.h"

#include "rtl8188e_rf.h"

#include "rtl8188e_dm.h"

#include "rtl8188e_recv.h"

#include "rtl8188e_xmit.h"

#include "rtl8188e_cmd.h"

#include "Hal8188EPwrSeq.h"

#include "rtl8188e_sreset.h"

#include "rtw_efuse.h"

#include "odm_precomp.h"

/*  Fw Array */

#define Rtl8188E_FwImageArray		Rtl8188EFwImgArray

#define Rtl8188E_FWImgArrayLength	Rtl8188EFWImgArrayLength

#define RTL8188E_FW_UMC_IMG			"rtl8188E\\rtl8188efw.bin"

#define RTL8188E_PHY_REG			"rtl8188E\\PHY_REG_1T.txt"

#define RTL8188E_PHY_RADIO_A			"rtl8188E\\radio_a_1T.txt"

#define RTL8188E_PHY_RADIO_B			"rtl8188E\\radio_b_1T.txt"

#define RTL8188E_AGC_TAB			"rtl8188E\\AGC_TAB_1T.txt"

#define RTL8188E_PHY_MACREG			"rtl8188E\\MAC_REG.txt"

#define RTL8188E_PHY_REG_PG			"rtl8188E\\PHY_REG_PG.txt"

#define RTL8188E_PHY_REG_MP			"rtl8188E\\PHY_REG_MP.txt"

/* 		RTL8188E Power Configuration CMDs for USB/SDIO interfaces */

#define Rtl8188E_NIC_PWR_ON_FLOW		rtl8188E_power_on_flow

#define Rtl8188E_NIC_RF_OFF_FLOW		rtl8188E_radio_off_flow

#define Rtl8188E_NIC_DISABLE_FLOW		rtl8188E_card_disable_flow

#define Rtl8188E_NIC_ENABLE_FLOW		rtl8188E_card_enable_flow

#define Rtl8188E_NIC_SUSPEND_FLOW		rtl8188E_suspend_flow

#define Rtl8188E_NIC_RESUME_FLOW		rtl8188E_resume_flow

#define Rtl8188E_NIC_PDN_FLOW			rtl8188E_hwpdn_flow

#define Rtl8188E_NIC_LPS_ENTER_FLOW		rtl8188E_enter_lps_flow

#define Rtl8188E_NIC_LPS_LEAVE_FLOW		rtl8188E_leave_lps_flow

#define DRVINFO_SZ	4 /*  unit is 8bytes */

#define PageNum_128(_Len)	(u32)(((_Len)>>7) + ((_Len) & 0x7F ? 1 : 0))

/*  download firmware related data structure */

#define FW_8188E_SIZE			0x4000 /* 16384,16k */

#define FW_8188E_START_ADDRESS		0x1000

#define FW_8188E_END_ADDRESS		0x1FFF /* 0x5FFF */

#define MAX_PAGE_SIZE			4096	/*  @ page : 4k bytes */

#define IS_FW_HEADER_EXIST(_pFwHdr)				\

	((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||	\

	(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||	\

	(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300 ||	\

	(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88E0)

enum firmware_source {

	FW_SOURCE_IMG_FILE = 0,

	FW_SOURCE_HEADER_FILE = 1,		/* from header file */

};

struct rt_firmware {

	enum firmware_source	eFWSource;

	u8			*szFwBuffer;

	u32			ulFwLength;

};

/*  This structure must be careful with byte-ordering */

struct rt_firmware_hdr {

	/*  8-byte alinment required */

	/*  LONG WORD 0 ---- */

	__le16		Signature;	/* 92C0: test chip; 92C,

					 * 88C0: test chip; 88C1: MP A-cut;

					 * 92C1: MP A-cut */

	u8		Category;	/*  AP/NIC and USB/PCI */

	u8		Function;	/*  Reserved for different FW function

					 *  indcation, for further use when

					 *  driver needs to download different

					 *  FW for different conditions */

	__le16		Version;	/*  FW Version */

	u8		Subversion;	/*  FW Subversion, default 0x00 */

	u16		Rsvd1;

	/*  LONG WORD 1 ---- */

	u8		Month;	/*  Release time Month field */

	u8		Date;	/*  Release time Date field */

	u8		Hour;	/*  Release time Hour field */

	u8		Minute;	/*  Release time Minute field */

	__le16		RamCodeSize;	/*  The size of RAM code */

	u8		Foundry;

	u8		Rsvd2;

	/*  LONG WORD 2 ---- */

	__le32		SvnIdx;	/*  The SVN entry index */

	u32		Rsvd3;

	/*  LONG WORD 3 ---- */

	u32		Rsvd4;

	u32		Rsvd5;

};

#define DRIVER_EARLY_INT_TIME		0x05

#define BCN_DMA_ATIME_INT_TIME		0x02

enum usb_rx_agg_mode {

	USB_RX_AGG_DISABLE,

	USB_RX_AGG_DMA,

	USB_RX_AGG_USB,

	USB_RX_AGG_MIX

};

#define MAX_RX_DMA_BUFFER_SIZE_88E				\

      0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8),

	      * WOLPattern(16*24)) */

#define MAX_TX_REPORT_BUFFER_SIZE		0x0400 /*  1k */

/*  BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */

#define MAX_TX_QUEUE			9

#define TX_SELE_HQ			BIT(0)		/*  High Queue */

#define TX_SELE_LQ			BIT(1)		/*  Low Queue */

#define TX_SELE_NQ			BIT(2)		/*  Normal Queue */

/*  Note: We will divide number of page equally for each queue other

 *  than public queue! */

/*  22k = 22528 bytes = 176 pages (@page =  128 bytes) */

/*  must reserved about 7 pages for LPS =>  176-7 = 169 (0xA9) */

/*  2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS

 *  null-data */

#define TX_TOTAL_PAGE_NUMBER_88E		0xA9/*   169 (21632=> 21k) */

#define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1)

/* Note: For Normal Chip Setting ,modify later */

#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER			\

	TX_TOTAL_PAGE_NUMBER_88E  /* 0xA9 , 0xb0=>176=>22k */

#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E			\

	(WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) /* 0xA9 */

/* 	Chip specific */

#define CHIP_BONDING_IDENTIFIER(_value)	(((_value)>>22)&0x3)

#define CHIP_BONDING_92C_1T2R	0x1

#define CHIP_BONDING_88C_USB_MCARD	0x2

#define CHIP_BONDING_88C_USB_HP	0x1

#include "HalVerDef.h"

#include "hal_com.h"

/* 	Channel Plan */

enum ChannelPlan {

	CHPL_FCC	= 0,

	CHPL_IC		= 1,

	CHPL_ETSI	= 2,

	CHPL_SPA	= 3,

	CHPL_FRANCE	= 4,

	CHPL_MKK	= 5,

	CHPL_MKK1	= 6,

	CHPL_ISRAEL	= 7,

	CHPL_TELEC	= 8,

	CHPL_GLOBAL	= 9,

	CHPL_WORLD	= 10,

};

struct txpowerinfo24g {

	u8 IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];

	u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G-1];

	/* If only one tx, only BW20 and OFDM are used. */

	s8 CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	s8 OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	s8 BW20_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	s8 BW40_Diff[MAX_RF_PATH][MAX_TX_COUNT];

};

#define EFUSE_REAL_CONTENT_LEN		512

#define EFUSE_MAP_LEN			128

#define EFUSE_MAX_SECTION		16

#define EFUSE_IC_ID_OFFSET		506 /* For some inferior IC purpose*/

#define AVAILABLE_EFUSE_ADDR(addr)	(addr < EFUSE_REAL_CONTENT_LEN)

/*  To prevent out of boundary programming case, */

/*  leave 1byte and program full section */

/*  9bytes + 1byt + 5bytes and pre 1byte. */

/*  For worst case: */

/*  | 1byte|----8bytes----|1byte|--5bytes--| */

/*  |         |            Reserved(14bytes)	      | */

/*  PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */

#define EFUSE_OOB_PROTECT_BYTES			15

#define		HWSET_MAX_SIZE_88E		512

#define		EFUSE_REAL_CONTENT_LEN_88E	256

#define		EFUSE_MAP_LEN_88E		512

#define		EFUSE_MAX_SECTION_88E		64

#define		EFUSE_MAX_WORD_UNIT_88E		4

#define		EFUSE_IC_ID_OFFSET_88E		506

#define		AVAILABLE_EFUSE_ADDR_88E(addr)			\

	(addr < EFUSE_REAL_CONTENT_LEN_88E)

/*  To prevent out of boundary programming case, leave 1byte and program

 *  full section */

/*  9bytes + 1byt + 5bytes and pre 1byte. */

/*  For worst case: */

/*  | 2byte|----8bytes----|1byte|--7bytes--| 92D */

/*  PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */

#define		EFUSE_OOB_PROTECT_BYTES_88E	18

#define		EFUSE_PROTECT_BYTES_BANK_88E	16

/* 			EFUSE for BT definition */

#define EFUSE_BT_REAL_CONTENT_LEN	1536	/*  512*3 */

#define EFUSE_BT_MAP_LEN		1024	/*  1k bytes */

#define EFUSE_BT_MAX_SECTION		128	/*  1024/8 */

#define EFUSE_PROTECT_BYTES_BANK	16

/*  For RTL8723 WiFi/BT/GPS multi-function configuration. */

enum rt_multi_func {

	RT_MULTI_FUNC_NONE = 0x00,

	RT_MULTI_FUNC_WIFI = 0x01,

	RT_MULTI_FUNC_BT = 0x02,

	RT_MULTI_FUNC_GPS = 0x04,

};

/*  For RTL8723 regulator mode. */

enum rt_regulator_mode {

	RT_SWITCHING_REGULATOR = 0,

	RT_LDO_REGULATOR = 1,

};

struct hal_data_8188e {

	struct HAL_VERSION	VersionID;

	enum rt_multi_func MultiFunc; /*  For multi-function consideration. */

	enum rt_regulator_mode RegulatorMode; /*  switching regulator or LDO */

	u16	CustomerID;

	u16	FirmwareVersion;

	u16	FirmwareVersionRev;

	u16	FirmwareSubVersion;

	u16	FirmwareSignature;

	u8	PGMaxGroup;

	/* current WIFI_PHY values */

	u32	ReceiveConfig;

	enum wireless_mode CurrentWirelessMode;

	enum ht_channel_width CurrentChannelBW;

	u8	CurrentChannel;

	u8	nCur40MhzPrimeSC;/*  Control channel sub-carrier */

	u16	BasicRateSet;

	/* rf_ctrl */

	u8	rf_chip;

	u8	rf_type;

	u8	NumTotalRFPath;

	u8	BoardType;

	/*  EEPROM setting. */

	u16	EEPROMVID;

	u16	EEPROMPID;

	u16	EEPROMSVID;

	u16	EEPROMSDID;

	u8	EEPROMCustomerID;

	u8	EEPROMSubCustomerID;

	u8	EEPROMVersion;

	u8	EEPROMRegulatory;

	u8	bTXPowerDataReadFromEEPORM;

	u8	EEPROMThermalMeter;

	u8	bAPKThermalMeterIgnore;

	bool	EepromOrEfuse;

	/* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */

	u8	EfuseMap[2][HWSET_MAX_SIZE_512];

	u8	EfuseUsedPercentage;

	struct efuse_hal	EfuseHal;

	u8	Index24G_CCK_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];

	u8	Index24G_BW40_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];

	/* If only one tx, only BW20 and OFDM are used. */

	s8	CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	s8	OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	s8	BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	s8	BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];

	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

	/*  For HT 40MHZ pwr */

	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

	/*  For HT 40MHZ pwr */

	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

	/*  HT 20<->40 Pwr diff */

	u8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

	/*  For HT<->legacy pwr diff */

	u8	TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

	/*  For power group */

	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

	u8	LegacyHTTxPowerDiff;/*  Legacy to HT rate power diff */

	/*  The current Tx Power Level */

	u8	CurrentCckTxPwrIdx;

	u8	CurrentOfdm24GTxPwrIdx;

	u8	CurrentBW2024GTxPwrIdx;

	u8	CurrentBW4024GTxPwrIdx;

	/*  Read/write are allow for following hardware information variables */

	u8	framesync;

	u32	framesyncC34;

	u8	framesyncMonitor;

	u8	DefaultInitialGain[4];

	u8	pwrGroupCnt;

	u32	MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];

	u32	CCKTxPowerLevelOriginalOffset;

	u8	CrystalCap;

	u32	AntennaTxPath;			/*  Antenna path Tx */

	u32	AntennaRxPath;			/*  Antenna path Rx */

	u8	BluetoothCoexist;

	u8	ExternalPA;

	u8	bLedOpenDrain; /* Open-drain support for controlling the LED.*/

	u8	b1x1RecvCombine;	/*  for 1T1R receive combining */

	u32	AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */

	struct bb_reg_def PHYRegDef[4];	/* Radio A/B/C/D */

	u32	RfRegChnlVal[2];

	/* RDG enable */

	bool	 bRDGEnable;

	/* for host message to fw */

	u8	LastHMEBoxNum;

	u8	fw_ractrl;

	u8	RegTxPause;

	/*  Beacon function related global variable. */

	u32	RegBcnCtrlVal;

	u8	RegFwHwTxQCtrl;

	u8	RegReg542;

	u8	RegCR_1;

	struct dm_priv	dmpriv;

	struct odm_dm_struct odmpriv;

	struct sreset_priv srestpriv;

	u8	CurAntenna;

	u8	AntDivCfg;

	u8	TRxAntDivType;

	u8	bDumpRxPkt;/* for debug */

	u8	bDumpTxPkt;/* for debug */

	u8	FwRsvdPageStartOffset; /* Reserve page start offset except

					*  beacon in TxQ. */

	/*  2010/08/09 MH Add CU power down mode. */

	bool		pwrdown;

	/*  Add for dual MAC  0--Mac0 1--Mac1 */

	u32	interfaceIndex;

	u8	OutEpQueueSel;

	u8	OutEpNumber;

	/*  Add for USB aggreation mode dynamic shceme. */

	bool		UsbRxHighSpeedMode;

	/*  2010/11/22 MH Add for slim combo debug mode selective. */

	/*  This is used for fix the drawback of CU TSMC-A/UMC-A cut.

	 * HW auto suspend ability. Close BT clock. */

	bool		SlimComboDbg;

	u16	EfuseUsedBytes;

#ifdef CONFIG_88EU_P2P

	struct P2P_PS_Offload_t	p2p_ps_offload;

#endif

	/*  Auto FSM to Turn On, include clock, isolation, power control

	 *  for MAC only */

	u8	bMacPwrCtrlOn;

	u32	UsbBulkOutSize;

	/*  Interrupt relatd register information. */

	u32	IntArray[3];/* HISR0,HISR1,HSISR */

	u32	IntrMask[3];

	u8	C2hArray[16];

	u8	UsbTxAggMode;

	u8	UsbTxAggDescNum;

	u16	HwRxPageSize;		/*  Hardware setting */

	u32	MaxUsbRxAggBlock;

	enum usb_rx_agg_mode UsbRxAggMode;

	u8	UsbRxAggBlockCount;	/*  USB Block count. Block size is

					 * 512-byte in high speed and 64-byte

					 * in full speed */

	u8	UsbRxAggBlockTimeout;

	u8	UsbRxAggPageCount;	/*  8192C DMA page count */

	u8	UsbRxAggPageTimeout;

};

#define GET_HAL_DATA(__pAdapter)				\

	((struct hal_data_8188e *)((__pAdapter)->HalData))

#define GET_RF_TYPE(priv)		(GET_HAL_DATA(priv)->rf_type)

#define INCLUDE_MULTI_FUNC_BT(_Adapter)				\

	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)

#define INCLUDE_MULTI_FUNC_GPS(_Adapter)			\

	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)

/*  rtl8188e_hal_init.c */

s32 rtl8188e_FirmwareDownload(struct adapter *padapter);

void _8051Reset88E(struct adapter *padapter);

void rtl8188e_InitializeFirmwareVars(struct adapter *padapter);

s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy);

/*  EFuse */

u8 GetEEPROMSize8188E(struct adapter *padapter);

void Hal_InitPGData88E(struct adapter *padapter);

void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo);

void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo,

			    bool AutoLoadFail);

void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo,

				bool AutoLoadFail);

void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo,

				 bool AutoLoadFail);

void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo,

				 bool AutoLoadFail);

void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter,u8 *PROMContent,

				 bool AutoLoadFail);

void Hal_ReadThermalMeter_88E(struct adapter *	dapter, u8 *PROMContent,

			      bool AutoloadFail);

void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo,

			      bool AutoLoadFail);

void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo,

				bool AutoLoadFail);

void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo,

				bool AutoLoadFail);

bool HalDetectPwrDownMode88E(struct adapter *Adapter);

void Hal_InitChannelPlan(struct adapter *padapter);

void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);

/*  register */

void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits);

void rtl8188e_clone_haldata(struct adapter *dst, struct adapter *src);

void rtl8188e_start_thread(struct adapter *padapter);

void rtl8188e_stop_thread(struct adapter *padapter);

void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter  *Adapter, int len);

s32 rtl8188e_iol_efuse_patch(struct adapter *padapter);

void rtw_cancel_all_timer(struct adapter *padapter);

void _ps_open_RF(struct adapter *adapt);

#endif /* __RTL8188E_HAL_H__ */

/******************************************************************************

 *

 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of version 2 of the GNU General Public License as

 * published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for

 * more details.

 *

 * You should have received a copy of the GNU General Public License along with

 * this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA

 *

 *

 ******************************************************************************/

#ifndef __RTL8188E_LED_H__

#define __RTL8188E_LED_H__

#include <osdep_service.h>

#include <drv_types.h>

/*  */

/*  Interface to manipulate LED objects. */

/*  */

void rtl8188eu_InitSwLeds(struct adapter *padapter);

void rtl8188eu_DeInitSwLeds(struct adapter *padapter);

void SwLedOn(struct adapter *padapter, struct LED_871x *pLed);

void SwLedOff(struct adapter *padapter, struct LED_871x *pLed);

#endif