Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 58b36967 authored by Sean Wang's avatar Sean Wang Committed by Matthias Brugger
Browse files

arm: dts: mt7623: use - instead of _ in DT node name 



It should be good that no use "_" is in DT node name. Consequently,
those nodes in certain files which have an inappropriate name containing
"_" are all being replaced with "-".

Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent f59c89df

arch/arm/boot/dts/mt7623.dtsi

+6 −6
Original line number Diff line number Diff line
@@ -28,7 +28,7 @@ 
	compatible = "mediatek,mt7623";

	interrupt-parent = <&sysirq>;



	cpu_opp_table: opp_table {

	cpu_opp_table: opp-table {

		compatible = "operating-points-v2";

		opp-shared;
@@ -147,32 +147,32 @@ 
	};



	thermal-zones {

			cpu_thermal: cpu_thermal {

			cpu_thermal: cpu-thermal {

				polling-delay-passive = <1000>;

				polling-delay = <1000>;



				thermal-sensors = <&thermal 0>;



				trips {

					cpu_passive: cpu_passive {

					cpu_passive: cpu-passive {

						temperature = <47000>;

						hysteresis = <2000>;

						type = "passive";

					};



					cpu_active: cpu_active {

					cpu_active: cpu-active {

						temperature = <67000>;

						hysteresis = <2000>;

						type = "active";

					};



					cpu_hot: cpu_hot {

					cpu_hot: cpu-hot {

						temperature = <87000>;

						hysteresis = <2000>;

						type = "hot";

					};



					cpu_crit {

					cpu-crit {

						temperature = <107000>;

						hysteresis = <2000>;

						type = "critical";

arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts

+25 −25
Original line number Diff line number Diff line
@@ -66,7 +66,7 @@ 
		regulator-always-on;

	};



	gpio_keys {

	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&key_pins_a>;
@@ -237,14 +237,14 @@ 


&pio {

	cir_pins_a:cir@0 {

		pins_cir {

		pins-cir {

			pinmux = <MT7623_PIN_46_IR_FUNC_IR>;

			bias-disable;

		};

	};



	i2c0_pins_a: i2c@0 {

		pins_i2c0 {

		pins-i2c0 {

			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,

				 <MT7623_PIN_76_SCL0_FUNC_SCL0>;

			bias-disable;
@@ -252,7 +252,7 @@ 
	};



	i2c1_pins_a: i2c@1 {

		pin_i2c1 {

		pin-i2c1 {

			pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,

				 <MT7623_PIN_58_SCL1_FUNC_SCL1>;

			bias-disable;
@@ -260,7 +260,7 @@ 
	};



	i2s0_pins_a: i2s@0 {

		pin_i2s0 {

		pin-i2s0 {

			pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,

				 <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,

				 <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
@@ -272,7 +272,7 @@ 
	};



	i2s1_pins_a: i2s@1 {

		pin_i2s1 {

		pin-i2s1 {

			pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,

				 <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,

				 <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
@@ -284,7 +284,7 @@ 
	};



	key_pins_a: keys@0 {

		pins_keys {

		pins-keys {

			pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,

				 <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;

			input-enable;
@@ -292,7 +292,7 @@ 
	};



	led_pins_a: leds@0 {

		pins_leds {

		pins-leds {

			pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,

				 <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,

				 <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
@@ -300,7 +300,7 @@ 
	};



	mmc0_pins_default: mmc0default {

		pins_cmd_dat {

		pins-cmd-dat {

			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,

				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,

				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
@@ -314,19 +314,19 @@ 
			bias-pull-up;

		};



		pins_clk {

		pins-clk {

			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;

			bias-pull-down;

		};



		pins_rst {

		pins-rst {

			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;

			bias-pull-up;

		};

	};



	mmc0_pins_uhs: mmc0 {

		pins_cmd_dat {

		pins-cmd-dat {

			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,

				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,

				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
@@ -341,20 +341,20 @@ 
			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;

		};



		pins_clk {

		pins-clk {

			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;

			drive-strength = <MTK_DRIVE_2mA>;

			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;

		};



		pins_rst {

		pins-rst {

			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;

			bias-pull-up;

		};

	};



	mmc1_pins_default: mmc1default {

		pins_cmd_dat {

		pins-cmd-dat {

			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,

				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,

				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
@@ -365,26 +365,26 @@ 
			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;

		};



		pins_clk {

		pins-clk {

			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;

			bias-pull-down;

			drive-strength = <MTK_DRIVE_4mA>;

		};



		pins_wp {

		pins-wp {

			pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;

			input-enable;

			bias-pull-up;

		};



		pins_insert {

		pins-insert {

			pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;

			bias-pull-up;

		};

	};



	mmc1_pins_uhs: mmc1 {

		pins_cmd_dat {

		pins-cmd-dat {

			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,

				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,

				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
@@ -395,7 +395,7 @@ 
			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;

		};



		pins_clk {

		pins-clk {

			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;

			drive-strength = <MTK_DRIVE_4mA>;

			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
@@ -403,7 +403,7 @@ 
	};



	pwm_pins_a: pwm@0 {

		pins_pwm {

		pins-pwm {

			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,

				 <MT7623_PIN_204_PWM1_FUNC_PWM1>,

				 <MT7623_PIN_205_PWM2_FUNC_PWM2>,
@@ -413,7 +413,7 @@ 
	};



	spi0_pins_a: spi@0 {

		pins_spi {

		pins-spi {

			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,

				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,

				<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
@@ -423,21 +423,21 @@ 
	};



	uart0_pins_a: uart@0 {

		pins_dat {

		pins-dat {

			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,

				 <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;

		};

	};



	uart1_pins_a: uart@1 {

		pins_dat {

		pins-dat {

			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,

				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;

		};

	};



	uart2_pins_a: uart@2 {

		pins_dat {

		pins-dat {

			pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,

				 <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;

		};

arch/arm/boot/dts/mt7623n-rfb-nand.dts

+3 −3
Original line number Diff line number Diff line
@@ -81,13 +81,13 @@ 


&pio {

	nand_pins_default: nanddefault {

		pins_ale {

		pins-ale {

			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;

			drive-strength = <MTK_DRIVE_8mA>;

			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;

		};



		pins_dat {

		pins-dat {

			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,

				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,

				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
@@ -102,7 +102,7 @@ 
			bias-pull-up;

		};



		pins_we {

		pins-we {

			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;

			drive-strength = <MTK_DRIVE_8mA>;

			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;