Blackfin: remove useless and outdated documentation

00-INDEX

	- This file

cachefeatures.txt

	- Supported cache features.

Filesystems

	- Requirements for mounting the root file system.

bfin-gpio-note.txt

	- Notes in developing/using bfin-gpio driver.

/*

 * File:         Documentation/blackfin/Filesystems

 * Based on:

 * Author:

 *

 * Created:

 * Description:  This file contains the simple DMA Implementation for Blackfin

 *

 * Rev:          $Id: Filesystems 2384 2006-11-01 04:12:43Z magicyang $

 *

 * Modified:

 *               Copyright 2004-2006 Analog Devices Inc.

 *

 * Bugs:         Enter bugs at http://blackfin.uclinux.org/

 *

 */

		How to mount the root file system in uClinux/Blackfin

		-----------------------------------------------------

1	Mounting EXT3 File system.

	------------------------

	Creating an EXT3 File system for uClinux/Blackfin:

Please follow the steps to form the EXT3 File system and mount the same as root

file system.

a	Make an ext3 file system as large as you want the final root file

	system.

		mkfs.ext3  /dev/ram0 <your-rootfs-size-in-1k-blocks>

b	Mount this Empty file system on a free directory as:

		mount -t ext3 /dev/ram0  ./test

			where ./test is the empty directory.

c	Copy your root fs directory that you have so carefully made over.

		cp -af  /tmp/my_final_rootfs_files/* ./test

		(For ex: cp -af uClinux-dist/romfs/* ./test)

d	If you have done everything right till now you should be able to see

	the required "root" dir's (that's etc, root, bin, lib, sbin...)

e	Now unmount the file system

		umount  ./test

f	Create the root file system image.

		dd if=/dev/ram0 bs=1k count=<your-rootfs-size-in-1k-blocks> \

		> ext3fs.img

Now you have to tell the kernel that will be mounting this file system as

rootfs.

So do a make menuconfig under kernel and select the Ext3 journaling file system

support under File system --> submenu.

2.	Mounting EXT2 File system.

	-------------------------

By default the ext2 file system image will be created if you invoke make from

the top uClinux-dist directory.

3.	Mounting CRAMFS File System

	----------------------------

To create a CRAMFS file system image execute the command

	mkfs.cramfs ./test cramfs.img

	where ./test is the target directory.

4.	Mounting ROMFS File System

	--------------------------

To create a ROMFS file system image execute the command

	genromfs -v -V "ROMdisk" -f romfs.img -d ./test

	where ./test is the target directory

5.	Mounting the JFFS2 Filesystem

	-----------------------------

To create a compressed JFFS filesystem (JFFS2), please execute the command

	mkfs.jffs2 -d ./test -o jffs2.img

	where ./test is the target directory.

However, please make sure the following is in your kernel config.

/*

 * RAM/ROM/Flash chip drivers

 */

#define CONFIG_MTD_CFI 1

#define CONFIG_MTD_ROM 1

/*

 * Mapping drivers for chip access

 */

#define CONFIG_MTD_COMPLEX_MAPPINGS 1

#define CONFIG_MTD_BF533 1

#undef CONFIG_MTD_UCLINUX

Through the u-boot boot loader, use the jffs2.img in the corresponding

partition made in linux-2.6.x/drivers/mtd/maps/bf533_flash.c.

NOTE - 	Currently the Flash driver is available only for EZKIT. Watch out for a

	STAMP driver soon.

6. 	Mounting the NFS File system

	-----------------------------

	For mounting the NFS please do the following in the kernel config.

	In Networking Support --> Networking options --> TCP/IP networking -->

		IP: kernel level autoconfiguration

	Enable BOOTP Support.

	In Kernel hacking --> Compiled-in kernel boot parameter add the following

		root=/dev/nfs rw ip=bootp

	In File system --> Network File system, Enable

		NFS file system support --> NFSv3 client support

		Root File system on NFS

	in uClibc menuconfig, do the following

	In Networking Support

		enable Remote Procedure Call (RPC) support

			Full RPC Support

	On the Host side, ensure that /etc/dhcpd.conf looks something like this

		ddns-update-style ad-hoc;

		allow bootp;

		subnet 10.100.4.0 netmask 255.255.255.0 {

		default-lease-time 122209600;

		max-lease-time 31557600;

		group {

			host bf533 {

				hardware ethernet 00:CF:52:49:C3:01;

				fixed-address 10.100.4.50;

				option root-path "/home/nfsmount";

			}

		}

	ensure that /etc/exports looks something like this

		/home/nfsmount *(rw,no_root_squash,no_all_squash)

	 run the following commands as root (may differ depending on your

	 distribution) :

		-  service nfs start

		-  service portmap start

		-  service dhcpd start

		-  /usr/sbin/exportfs

/*

 * File:         Documentation/blackfin/cachefeatures.txt

 * Based on:

 * Author:

 *

 * Created:

 * Description:  This file contains the simple DMA Implementation for Blackfin

 *

 * Rev:          $Id: cachefeatures.txt 2384 2006-11-01 04:12:43Z magicyang $

 *

 * Modified:

 *               Copyright 2004-2006 Analog Devices Inc.

 *

 * Bugs:         Enter bugs at http://blackfin.uclinux.org/

 *

 */

	- Instruction and Data cache initialization.

		icache_init();

		dcache_init();

	-  Instruction and Data cache Invalidation Routines, when flushing the

	   same is not required.

		_icache_invalidate();

		_dcache_invalidate();

	Also, for invalidating the entire instruction and data cache, the below

	routines are provided (another method for invalidation, refer page no 267 and 287 of

	ADSP-BF533 Hardware Reference manual)

		invalidate_entire_dcache();

		invalidate_entire_icache();

	-External Flushing of Instruction and data cache routines.

		flush_instruction_cache();

		flush_data_cache();

	- Internal Flushing of Instruction and Data Cache.

		icplb_flush();

		dcplb_flush();

	- Miscellaneous cache functions.

		flush_cache_all();

		flush_cache_mm();

		invalidate_dcache_range();

		flush_dcache_range();

		flush_dcache_page();

		flush_cache_range();

		flush_cache_page();

		invalidate_dcache_range();

		flush_page_to_ram();