Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 54188205 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files

Merge tag 'omap-for-v4.11/dt-late' of... 

Merge tag 'omap-for-v4.11/dt-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Few more late dts changes for omaps for v4.11 merge window" from Tony Lindgren:

- Add support for phyCORE-AM335x PCM-953 carrier board

- Add power button and charger support for am335x-chiliboard

* tag 'omap-for-v4.11/dt-late' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-chiliboard: Support charger
  ARM: dts: am335x-chiliboard: Support power button
  ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
parents 2b4c76ba 53225f63

Documentation/devicetree/bindings/arm/omap/omap.txt

+3 −0
Original line number Diff line number Diff line
@@ -151,6 +151,9 @@ Boards: 
- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4

  compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx"



- AM335X phyCORE-AM335x: Development kit

  compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"



- OMAP5 EVM : Evaluation Module

  compatible = "ti,omap5-evm", "ti,omap5"

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -588,6 +588,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ 
	am335x-lxm.dtb \

	am335x-nano.dtb \

	am335x-pepper.dtb \

	am335x-phycore-rdk.dtb \

	am335x-shc.dtb \

	am335x-sbc-t335.dtb \

	am335x-sl50.dtb \

arch/arm/boot/dts/am335x-chiliboard.dts

+16 −0
Original line number Diff line number Diff line
@@ -185,3 +185,19 @@ 
	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;

	status = "okay";

};



&tps {

	interrupt-parent = <&intc>;

	interrupts = <7>; /* NNMI */



	charger {

		interrupts = <0>, <1>;

		interrupt-names = "USB", "AC";

		status = "okay";

	};



	pwrbutton {

		interrupts = <2>;

		status = "okay";

	};

};

arch/arm/boot/dts/am335x-pcm-953.dtsi

0 → 100644
+288 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2014-2017 Phytec Messtechnik GmbH

 * Author: Wadim Egorov <w.egorov@phytec.de>

 *	   Teresa Remmet <t.remmet@phytec.de>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <dt-bindings/input/input.h>



/ {

	model = "Phytec AM335x PCM-953";

	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";



	/* Power */

	regulators {

		vcc3v3: fixedregulator@1 {

			compatible = "regulator-fixed";

			regulator-name = "vcc3v3";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

			regulator-boot-on;

		};



		vcc1v8: fixedregulator@2 {

			compatible = "regulator-fixed";

			regulator-name = "vcc1v8";

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-boot-on;

		};

	};



	/* User IO */

	user_leds: user_leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&user_leds_pins>;



		green {

			label = "green:user";

			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "gpio";

			default-state = "on";

		};



		yellow {

			label = "yellow:user";

			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;

			linux,default-trigger = "gpio";

			default-state = "on";

		};

	};



	user_buttons: user_buttons {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&user_buttons_pins>;



		button@0 {

			label = "home";

			linux,code = <KEY_HOME>;

			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;

			gpio-key,wakeup;

		};



		button@1 {

			label = "menu";

			linux,code = <KEY_MENU>;

			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;

			gpio-key,wakeup;

		};



	};

};



&am33xx_pinmux {

	user_buttons_pins: pinmux_user_buttons {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* emu0.gpio3_7 */

			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* emu1.gpio3_8 */

		>;

	};



	user_leds_pins: pinmux_user_leds {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn1.gpio1_30 */

			AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn2.gpio1_31 */

		>;

	};

};



/* CAN */

&am33xx_pinmux {

	dcan1_pins: pinmux_dcan1 {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */

			AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */

		>;

	};

};



&dcan1 {

	pinctrl-names = "default";

	pinctrl-0 = <&dcan1_pins>;

	status = "okay";

};



/* Ethernet */

&am33xx_pinmux {

	ethernet1_pins: pinmux_ethernet1 {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */

			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */

			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */

			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */

			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */

			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */

			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */

			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */

			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */

			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */

			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */

			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */

		>;

	};

};



&cpsw_emac1 {

	phy-handle = <&phy1>;

	phy-mode = "rgmii-id";

	dual_emac_res_vlan = <2>;

	status = "okay";

};



&davinci_mdio {

	phy1: ethernet-phy@2 {

		reg = <2>;



		/* Register 260 (104h) – RGMII Clock and Control Pad Skew */

		rxc-skew-ps = <1400>;

		rxdv-skew-ps = <0>;

		txc-skew-ps = <1400>;

		txen-skew-ps = <0>;

		/* Register 261 (105h) – RGMII RX Data Pad Skew */

		rxd3-skew-ps = <0>;

		rxd2-skew-ps = <0>;

		rxd1-skew-ps = <0>;

		rxd0-skew-ps = <0>;

		/* Register 262 (106h) – RGMII TX Data Pad Skew */

		txd3-skew-ps = <0>;

		txd2-skew-ps = <0>;

		txd1-skew-ps = <0>;

		txd0-skew-ps = <0>;

	};

};



&mac {

	slaves = <2>;

	pinctrl-names = "default";

	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;

	dual_emac;

};



/* Misc */

&am33xx_pinmux {

	pinctrl-names = "default";

	pinctrl-0 = <&cb_gpio_pins>;



	cb_gpio_pins: pinmux_cb_gpio {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart0_ctsn.gpio1_8 */

			AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart0_rtsn.gpio1_9 */

		>;

	};

};



/* MMC */

&am33xx_pinmux {

	mmc1_pins: pinmux_mmc1_pins {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */

			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */

			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */

			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */

			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */

			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */

			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */

		>;

	};

};



&mmc1 {

	vmmc-supply = <&vcc3v3>;

	bus-width = <4>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins>;

	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;

	status = "okay";

};



/* UARTs */

&am33xx_pinmux {

	uart0_pins: pinmux_uart0 {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */

			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */

		>;

	};



	uart1_pins: pinmux_uart1 {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */

			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */

			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */

			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */

		>;

	};



	uart2_pins: pinmux_uart2 {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */

			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_rx_clk.uart2_txd */

		>;

	};



	uart3_pins: pinmux_uart3 {

		pinctrl-single,pins = <

			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd3.uart3_rxd */

			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd2.uart3_txd */

		>;

	};

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins>;

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_pins>;

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_pins>;

	status = "okay";

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_pins>;

	status = "okay";

};



/* USB */

&cppi41dma {

	status = "okay";

};



&usb_ctrl_mod {

	status = "okay";

};



&usb {

	status = "okay";

};



&usb0 {

	status = "okay";

};



&usb0_phy {

	status = "okay";

};



&usb1 {

	status = "okay";

	dr_mode = "host";

};



&usb1_phy {

	status = "okay";

};

arch/arm/boot/dts/am335x-phycore-rdk.dts

0 → 100644
+27 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2014 PHYTEC Messtechnik GmbH

 * Author: Wadim Egorov <w.egorov@phytec.de>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



/dts-v1/;



#include "am335x-phycore-som.dtsi"

#include "am335x-pcm-953.dtsi"



/* SoM */

&i2c_eeprom {

	status = "okay";

};



&i2c_rtc {

	status = "okay";

};



&serial_flash {

	status = "okay";



};