Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 50946b2a authored by Mark Brown's avatar Mark Brown
Browse files

Merge remote-tracking branches 'asoc/topic/fsl-ssi', 'asoc/topic/hi6220' and... 

Merge remote-tracking branches 'asoc/topic/fsl-ssi', 'asoc/topic/hi6220' and 'asoc/topic/imx' into asoc-next
parents 0f57c12a 23aaf4ce e6d56d21 8f7206d6

Documentation/devicetree/bindings/sound/fsl,ssi.txt

+18 −16
Original line number Diff line number Diff line
@@ -20,24 +20,8 @@ Required properties: 
                    have.

- interrupt-parent: The phandle for the interrupt controller that

                    services interrupts for this device.

- fsl,playback-dma: Phandle to a node for the DMA channel to use for

                    playback of audio.  This is typically dictated by SOC

                    design.  See the notes below.

- fsl,capture-dma:  Phandle to a node for the DMA channel to use for

                    capture (recording) of audio.  This is typically dictated

                    by SOC design.  See the notes below.

- fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.

                    This number is the maximum allowed value for SFCSR[TFWM0].

- fsl,ssi-asynchronous:

                    If specified, the SSI is to be programmed in asynchronous

                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must

                    all be connected to valid signals.  In synchronous mode,

                    SRCK and SRFS are ignored.  Asynchronous mode allows

                    playback and capture to use different sample sizes and

                    sample rates.  Some drivers may require that SRCK and STCK

                    be connected together, and SRFS and STFS be connected

                    together.  This would still allow different sample sizes,

                    but not different sample rates.

 - clocks:          "ipg" - Required clock for the SSI unit

                    "baud" - Required clock for SSI master mode. Otherwise this

		      clock is not used
@@ -61,6 +45,24 @@ Optional properties: 
- fsl,mode:         The operating mode for the AC97 interface only.

                    "ac97-slave" - AC97 mode, SSI is clock slave

                    "ac97-master" - AC97 mode, SSI is clock master

- fsl,ssi-asynchronous:

                    If specified, the SSI is to be programmed in asynchronous

                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must

                    all be connected to valid signals.  In synchronous mode,

                    SRCK and SRFS are ignored.  Asynchronous mode allows

                    playback and capture to use different sample sizes and

                    sample rates.  Some drivers may require that SRCK and STCK

                    be connected together, and SRFS and STFS be connected

                    together.  This would still allow different sample sizes,

                    but not different sample rates.

- fsl,playback-dma: Phandle to a node for the DMA channel to use for

                    playback of audio.  This is typically dictated by SOC

                    design.  See the notes below.

                    Only used on Power Architecture.

- fsl,capture-dma:  Phandle to a node for the DMA channel to use for

                    capture (recording) of audio.  This is typically dictated

                    by SOC design.  See the notes below.

                    Only used on Power Architecture.



Child 'codec' node required properties:

- compatible:       Compatible list, contains the name of the codec

Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt

0 → 100644
+42 −0
Original line number Diff line number Diff line 
* Hisilicon 6210 i2s controller



Required properties:



- compatible: should be one of the following:

   - "hisilicon,hi6210-i2s"

- reg: physical base address of the i2s controller unit and length of

   memory mapped region.

- interrupts: should contain the i2s interrupt.

- clocks: a list of phandle + clock-specifier pairs, one for each entry

  in clock-names.

- clock-names: should contain following:

   - "dacodec"

   - "i2s-base"

- dmas: DMA specifiers for tx dma. See the DMA client binding,

  Documentation/devicetree/bindings/dma/dma.txt

- dma-names: should be "tx" and "rx"

- hisilicon,sysctrl-syscon: phandle to sysctrl syscon

- #sound-dai-cells: Should be set to 1 (for multi-dai)

   - The dai cell indexes reference the following interfaces:

       0: S2 interface

       (Currently that is the only one available, but more may be

        supported in the future)



Example for the hi6210 i2s controller:



i2s0: i2s@f7118000{

	compatible = "hisilicon,hi6210-i2s";

	reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */

	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */

	clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,

		 <&sys_ctrl HI6220_BBPPLL0_DIV>;

	clock-names = "dacodec", "i2s-base";

	dmas = <&dma0 15 &dma0 14>;

	dma-names = "rx", "tx";

	hisilicon,sysctrl-syscon = <&sys_ctrl>;

	#sound-dai-cells = <1>;

};



Then when referencing the i2s controller:

	sound-dai = <&i2s0 0>; /* index 0 => S2 interface */

sound/soc/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -47,6 +47,7 @@ source "sound/soc/cirrus/Kconfig" 
source "sound/soc/davinci/Kconfig"

source "sound/soc/dwc/Kconfig"

source "sound/soc/fsl/Kconfig"

source "sound/soc/hisilicon/Kconfig"

source "sound/soc/jz4740/Kconfig"

source "sound/soc/nuc900/Kconfig"

source "sound/soc/omap/Kconfig"

sound/soc/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -27,6 +27,7 @@ obj-$(CONFIG_SND_SOC) += cirrus/ 
obj-$(CONFIG_SND_SOC)	+= davinci/

obj-$(CONFIG_SND_SOC)	+= dwc/

obj-$(CONFIG_SND_SOC)	+= fsl/

obj-$(CONFIG_SND_SOC)	+= hisilicon/

obj-$(CONFIG_SND_SOC)	+= jz4740/

obj-$(CONFIG_SND_SOC)	+= img/

obj-$(CONFIG_SND_SOC)	+= intel/

sound/soc/fsl/fsl_ssi.c

+7 −20
Original line number Diff line number Diff line
@@ -35,6 +35,7 @@ 
#include <linux/module.h>

#include <linux/interrupt.h>

#include <linux/clk.h>

#include <linux/ctype.h>

#include <linux/device.h>

#include <linux/delay.h>

#include <linux/slab.h>
@@ -54,16 +55,6 @@ 
#include "fsl_ssi.h"

#include "imx-pcm.h"



/**

 * FSLSSI_I2S_RATES: sample rates supported by the I2S

 *

 * This driver currently only supports the SSI running in I2S slave mode,

 * which means the codec determines the sample rate.  Therefore, we tell

 * ALSA that we support all rates and let the codec driver decide what rates

 * are really supported.

 */

#define FSLSSI_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS



/**

 * FSLSSI_I2S_FORMATS: audio formats supported by the SSI

 *
@@ -1212,14 +1203,14 @@ static struct snd_soc_dai_driver fsl_ssi_dai_template = { 
		.stream_name = "CPU-Playback",

		.channels_min = 1,

		.channels_max = 32,

		.rates = FSLSSI_I2S_RATES,

		.rates = SNDRV_PCM_RATE_CONTINUOUS,

		.formats = FSLSSI_I2S_FORMATS,

	},

	.capture = {

		.stream_name = "CPU-Capture",

		.channels_min = 1,

		.channels_max = 32,

		.rates = FSLSSI_I2S_RATES,

		.rates = SNDRV_PCM_RATE_CONTINUOUS,

		.formats = FSLSSI_I2S_FORMATS,

	},

	.ops = &fsl_ssi_dai_ops,
@@ -1325,14 +1316,10 @@ static struct snd_ac97_bus_ops fsl_ssi_ac97_ops = { 
 */

static void make_lowercase(char *s)

{

	char *p = s;

	char c;



	while ((c = *p)) {

		if ((c >= 'A') && (c <= 'Z'))

			*p = c + ('a' - 'A');

		p++;

	}

	if (!s)

		return;

	for (; *s; s++)

		*s = tolower(*s);

}



static int fsl_ssi_imx_probe(struct platform_device *pdev,