scsi: remove various unused blist flags (496c91bb) · Commits · e / devices / android_kernel_teracube_emerald

drivers/scsi/scsi_scan.c

+2 −23

Original line number	Diff line number	Diff line
		@@ -656,8 +656,6 @@ static int scsi_probe_lun(struct scsi_device sdev, unsigned char inq_result,
		if (pass == 1) {
		if (BLIST_INQUIRY_36 & *bflags)
		next_inquiry_len = 36;
		else if (BLIST_INQUIRY_58 & *bflags)
		next_inquiry_len = 58;
		else if (sdev->inquiry_len)
		next_inquiry_len = sdev->inquiry_len;
		else
		@@ -927,15 +925,6 @@ static int scsi_add_lun(struct scsi_device sdev, unsigned char inq_result,

		sdev->use_10_for_rw = 1;

		if (*bflags & BLIST_MS_SKIP_PAGE_08)
		sdev->skip_ms_page_8 = 1;

		if (*bflags & BLIST_MS_SKIP_PAGE_3F)
		sdev->skip_ms_page_3f = 1;

		if (*bflags & BLIST_USE_10_BYTE_MS)
		sdev->use_10_for_ms = 1;

		/* some devices don't like REPORT SUPPORTED OPERATION CODES
		* and will simply timeout causing sd_mod init to take a very
		* very long time */
		@@ -957,9 +946,6 @@ static int scsi_add_lun(struct scsi_device sdev, unsigned char inq_result,
		return SCSI_SCAN_NO_RESPONSE;
		}

		if (*bflags & BLIST_MS_192_BYTES_FOR_3F)
		sdev->use_192_bytes_for_3f = 1;

		if (*bflags & BLIST_NOT_LOCKABLE)
		sdev->lockable = 0;

		@@ -969,9 +955,6 @@ static int scsi_add_lun(struct scsi_device sdev, unsigned char inq_result,
		if (*bflags & BLIST_NO_DIF)
		sdev->no_dif = 1;

		if (*bflags & BLIST_SYNC_ALUA)
		sdev->synchronous_alua = 1;

		sdev->eh_timeout = SCSI_DEFAULT_EH_TIMEOUT;

		if (*bflags & BLIST_TRY_VPD_PAGES)
		@@ -1109,7 +1092,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
		/*
		* result contains valid SCSI INQUIRY data.
		*/
		if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) {
		if ((result[0] >> 5) == 3) {
		/*
		* For a Peripheral qualifier 3 (011b), the SCSI
		* spec says: The device server is not capable of
		@@ -1267,11 +1250,7 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget,
		*/
		if (scsi_level < SCSI_3 && !(bflags & BLIST_LARGELUN))
		max_dev_lun = min(8U, max_dev_lun);

		/*
		* Stop scanning at 255 unless BLIST_SCSI3LUN
		*/
		if (!(bflags & BLIST_SCSI3LUN))
		else
		max_dev_lun = min(256U, max_dev_lun);

		/*

include/scsi/scsi_devinfo.h

+0 −9

Original line number	Diff line number	Diff line
		@@ -15,12 +15,7 @@
		#define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */
		#define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */
		#define BLIST_INQUIRY_36 0x400 /* override additional length field */
		#define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */
		#define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */
		#define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */
		#define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */
		#define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */
		#define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */
		#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs
		(if HBA supports more than 8 LUNs) */
		#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */
		@@ -29,14 +24,10 @@
		#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
		#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
		#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */
		#define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */
		#define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */
		#define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */
		#define BLIST_SCSI3LUN 0x8000000 /* Scan more than 256 LUNs
		for sequential scan */
		#define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */
		#define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */
		#define BLIST_MAX_1024 0x40000000 /* maximum 1024 sector cdb length */
		#define BLIST_SYNC_ALUA 0x80000000 /* Synchronous ALUA commands */

		#endif