Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 443ef126 authored by Eyal Reizer's avatar Eyal Reizer Committed by Tony Lindgren
Browse files

ARM: dts: am437x-sk-evm: add wilink8 support 



enable mmc3 used for wlan and uart1 used for bluetooth
configure the gpios used for wlan and bluetooth controls
add fixed voltage regulator used for wlan power control

Signed-off-by: default avatarEyal Reizer <eyalr@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent ad365516

arch/arm/boot/dts/am437x-sk-evm.dts

+115 −0
Original line number Diff line number Diff line
@@ -15,6 +15,7 @@ 
#include <dt-bindings/pwm/pwm.h>

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/interrupt-controller/irq.h>



/ {

	model = "TI AM437x SK EVM";
@@ -158,6 +159,22 @@ 
			};

		};

	};



	vmmcwl_fixed: fixedregulator-mmcwl {

		/*

		 * WL_EN is not SDIO standard compliant. It is an out of band

		 * signal and hard to be dealt with in a standard way by the

		 * SDIO core driver.

		 * So modelling the WL_EN line as a regulator was a natural

		 * choice as the MMC core already deals with MMC supplies.

		 */

		compatible = "regulator-fixed";

		regulator-name = "vmmcwl_fixed";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};

};



&am43xx_pinmux {
@@ -418,6 +435,62 @@ 
			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */

		>;

	};



	mmc3_pins_default: pinmux_mmc3_pins_default {

		pinctrl-single,pins = <

			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */

			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */

			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */

			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */

			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */

			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */

		>;

	};



	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {

		pinctrl-single,pins = <

			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */

			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */

			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */

			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */

			AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */

			AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */

		>;

	};



	wlan_pins_default: pinmux_wlan_pins_default {

		pinctrl-single,pins = <

			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */

			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */

		>;

	};



	wlan_pins_sleep: pinmux_wlan_pins_sleep {

		pinctrl-single,pins = <

			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */

			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */

		>;

	};



	uart1_bt_pins_default: pinmux_uart1_bt_pins_default {

		pinctrl-single,pins = <

			AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0)		/* uart1_rxd.uart1_rxd */

			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */

			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */

			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */

			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */

		>;

	};



	uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {

		pinctrl-single,pins = <

			AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rxd.uart1_rxd */

			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_txd.uart1_txd */

			AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_ctsn.uart1_ctsn */

			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rtsn.uart1_rtsn */

			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */

		>;

	};

};



&i2c0 {
@@ -581,6 +654,10 @@ 
	status = "okay";

};



&gpio4 {

	status = "okay";

};



&gpio5 {

	status = "okay";

};
@@ -595,6 +672,44 @@ 
	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;

};



&uart1 {

	status = "okay";

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&uart1_bt_pins_default>;

	pinctrl-1 = <&uart1_bt_pins_sleep>;

};



&mmc3 {

	status = "okay";

	/*

	 * these are on the crossbar and are outlined in the

	 * xbar-event-map element

	 */

	dmas = <&edma_xbar 30 0 1>,

		<&edma_xbar 31 0 2>;

	dma-names = "tx", "rx";

	vmmc-supply = <&vmmcwl_fixed>;

	bus-width = <4>;

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&mmc3_pins_default>;

	pinctrl-1 = <&mmc3_pins_sleep>;

	cap-power-off-card;

	keep-power-in-suspend;

	ti,non-removable;



	#address-cells = <1>;

	#size-cells = <0>;

	wlcore: wlcore@2 {

		compatible = "ti,wl1835";

		pinctrl-names = "default", "sleep";

		pinctrl-0 = <&wlan_pins_default>;

		pinctrl-1 = <&wlan_pins_sleep>;

		reg = <2>;

		interrupt-parent = <&gpio4>;

		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;

	};

};



&usb2_phy1 {

	status = "okay";

};