Merge branch 'i2c/platform_data-immutable' into i2c/for-4.18

In this mode ``intel_pstate`` registers utilization update callbacks with the

CPU scheduler in order to run a P-state selection algorithm, either

``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy

``powersave`` or ``performance``, depending on the ``scaling_governor`` policy

setting in ``sysfs``.  The current CPU frequency information to be made

available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is

periodically updated by those utilization update callbacks too.

==================================

Depending on its configuration and the capabilities of the platform it runs on,

the Linux kernel can support up to four system sleep states, includig

the Linux kernel can support up to four system sleep states, including

hibernation and up to three variants of system suspend.  The sleep states that

can be supported by the kernel are listed below.

			   data device, but just remove the mapping.

      read_only: Don't allow any changes to be made to the pool

		 metadata.

		 metadata.  This mode is only available after the

		 thin-pool has been created and first used in full

		 read/write mode.  It cannot be specified on initial

		 thin-pool creation.

      error_if_no_space: Error IOs, instead of queueing, if no space.

Optional properties:

- dma-coherent      : Present if dma operations are coherent

- clocks            : a list of phandle + clock specifier pairs

- resets            : a list of phandle + reset specifier pairs

- target-supply     : regulator for SATA target power

- phys              : reference to the SATA PHY node

- phy-names         : must be "sata-phy"

  require specific display timings. The panel-timing subnode expresses those

  timings as specified in the timing subnode section of the display timing

  bindings defined in

  Documentation/devicetree/bindings/display/display-timing.txt.

  Documentation/devicetree/bindings/display/panel/display-timing.txt.

Connectivity