ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board (397a7d45) · Commits · e / devices / android_kernel_teracube_emerald

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -284,6 +284,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
		imx6dl-gw551x.dtb \
		imx6dl-gw552x.dtb \
		imx6dl-hummingboard.dtb \
		imx6dl-nit6xlite.dtb \
		imx6dl-nitrogen6x.dtb \
		imx6dl-phytec-pbab01.dtb \
		imx6dl-rex-basic.dtb \

arch/arm/boot/dts/imx6dl-nit6xlite.dts

0 → 100644

+49 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright 2015 Boundary Devices, Inc.
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License
		* version 2 as published by the Free Software Foundation.
		*
		* This file is distributed in the hope that it will be useful
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* Or, alternatively
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/
		/dts-v1/;

		#include "imx6dl.dtsi"
		#include "imx6qdl-nit6xlite.dtsi"

		/ {
		model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
		compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
		};

arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi

0 → 100644

+630 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright 2015 Boundary Devices, Inc.
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License
		* version 2 as published by the Free Software Foundation.
		*
		* This file is distributed in the hope that it will be useful
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* Or, alternatively
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/
		#include <dt-bindings/gpio/gpio.h>
		#include <dt-bindings/input/input.h>

		/ {
		chosen {
		stdout-path = &uart2;
		};

		memory {
		reg = <0x10000000 0x20000000>;
		};

		regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_2p5v: regulator@0 {
		compatible = "regulator-fixed";
		reg = <0>;
		regulator-name = "2P5V";
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		regulator-always-on;
		};

		reg_3p3v: regulator@1 {
		compatible = "regulator-fixed";
		reg = <1>;
		regulator-name = "3P3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		};

		reg_usb_otg_vbus: regulator@2 {
		compatible = "regulator-fixed";
		reg = <2>;
		regulator-name = "usb_otg_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		};

		reg_wlan_vmmc: regulator@3 {
		compatible = "regulator-fixed";
		reg = <3>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_wlan_vmmc>;
		regulator-name = "reg_wlan_vmmc";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <70000>;
		enable-active-high;
		};
		};

		bt_rfkill {
		compatible = "rfkill-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_bt_rfkill>;
		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
		name = "bt_rfkill";
		type = <2>;
		};

		gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_keys>;

		home {
		label = "Home";
		gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
		linux,code = <102>;
		};

		back {
		label = "Back";
		gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
		linux,code = <158>;
		};
		};

		leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_leds>;

		j14-pin1 {
		gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
		retain-state-suspended;
		default-state = "off";
		};

		j14-pin3 {
		gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
		retain-state-suspended;
		default-state = "off";
		};

		j14-pins8-9 {
		gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
		retain-state-suspended;
		default-state = "off";
		};

		j46-pin2 {
		gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
		retain-state-suspended;
		default-state = "off";
		};

		j46-pin3 {
		gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
		retain-state-suspended;
		default-state = "off";
		};
		};

		backlight_lcd {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_3p3v>;
		status = "okay";
		};

		backlight_lvds0: backlight_lvds0 {
		compatible = "pwm-backlight";
		pwms = <&pwm4 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_3p3v>;
		status = "okay";
		};

		panel_lvds0 {
		compatible = "hannstar,hsd100pxn1";
		backlight = <&backlight_lvds0>;

		port {
		panel_in_lvds0: endpoint {
		remote-endpoint = <&lvds0_out>;
		};
		};
		};

		sound {
		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
		"fsl,imx-audio-sgtl5000";
		model = "imx6dl-nit6xlite-sgtl5000";
		ssi-controller = <&ssi1>;
		audio-codec = <&codec>;
		audio-routing =
		"MIC_IN", "Mic Jack",
		"Mic Jack", "Mic Bias",
		"Headphone Jack", "HP_OUT";
		mux-int-port = <1>;
		mux-ext-port = <3>;
		};
		};

		&audmux {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_audmux>;
		status = "okay";
		};

		&clks {
		assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
		<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
		assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
		<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
		};

		&ecspi1 {
		fsl,spi-num-chipselects = <1>;
		cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ecspi1>;
		status = "okay";

		flash: m25p80@0 {
		compatible = "microchip,sst25vf016b";
		spi-max-frequency = <20000000>;
		reg = <0>;
		};
		};

		&fec {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_enet>;
		phy-mode = "rgmii";
		phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
		txen-skew-ps = <0>;
		txc-skew-ps = <3000>;
		rxdv-skew-ps = <0>;
		rxc-skew-ps = <3000>;
		rxd0-skew-ps = <0>;
		rxd1-skew-ps = <0>;
		rxd2-skew-ps = <0>;
		rxd3-skew-ps = <0>;
		txd0-skew-ps = <0>;
		txd1-skew-ps = <0>;
		txd2-skew-ps = <0>;
		txd3-skew-ps = <0>;
		interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
		<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
		status = "okay";
		};

		&hdmi {
		ddc-i2c-bus = <&i2c2>;
		status = "okay";
		};

		&i2c1 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c1>;
		status = "okay";

		codec: sgtl5000@0a {
		compatible = "fsl,sgtl5000";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_sgtl5000>;
		reg = <0x0a>;
		clocks = <&clks 201>;
		VDDA-supply = <&reg_2p5v>;
		VDDIO-supply = <&reg_3p3v>;
		};
		};

		&i2c2 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c2>;
		status = "okay";
		};

		&i2c3 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c3>;
		status = "okay";

		touchscreen@04 {
		compatible = "eeti,egalax_ts";
		reg = <0x04>;
		interrupt-parent = <&gpio1>;
		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
		};

		touchscreen@38 {
		compatible = "edt,edt-ft5x06";
		reg = <0x38>;
		interrupt-parent = <&gpio1>;
		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
		};

		rtc@6f {
		compatible = "isil,isl1208";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_rtc>;
		reg = <0x6f>;
		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
		};
		};

		&iomuxc {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_j10>;
		pinctrl-1 = <&pinctrl_j28>;

		imx6dl-nit6xlite {
		pinctrl_audmux: audmuxgrp {
		fsl,pins = <
		MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
		MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
		MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
		MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
		>;
		};

		pinctrl_bt_rfkill: bt_rfkillgrp {
		fsl,pins = <
		/* BT wake */
		MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
		/* BT reset */
		MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0
		/* BT reg en */
		MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
		/* BT host wake irq */
		MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0
		>;
		};

		pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
		MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
		MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
		MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
		>;
		};

		pinctrl_enet: enetgrp {
		fsl,pins = <
		MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
		MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
		MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
		MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
		MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
		MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
		MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
		MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
		MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
		MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
		MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
		MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
		MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
		MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
		MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
		/* Phy reset */
		MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0
		MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
		MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
		>;
		};

		pinctrl_gpio_keys: gpio_keysgrp {
		fsl,pins = <
		/* Home Button: J14 pin 5 */
		MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
		/* Back Button: J14 pin 7 */
		MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
		>;
		};

		pinctrl_i2c1: i2c1grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
		MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
		>;
		};

		pinctrl_i2c2: i2c2grp {
		fsl,pins = <
		MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
		MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
		>;
		};

		pinctrl_i2c3: i2c3grp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
		MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
		/* Touch IRQ: J7 pin 4 */
		MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
		/* tcs2004 IRQ */
		MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0
		/* tsc2004 reset */
		MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0
		>;
		};

		pinctrl_j10: j10grp {
		fsl,pins = <
		/* Broadcom WiFi module pins */
		MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
		MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
		MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
		MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
		MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
		MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
		MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0
		>;
		};

		pinctrl_j28: j28grp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
		>;
		};

		pinctrl_leds: ledsgrp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0
		MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0
		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0
		MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0
		MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0
		>;
		};

		pinctrl_pwm1: pwm1grp {
		fsl,pins = <
		MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
		>;
		};

		pinctrl_pwm3: pwm3grp {
		fsl,pins = <
		MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
		>;
		};

		pinctrl_pwm4: pwm4grp {
		fsl,pins = <
		MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
		>;
		};

		pinctrl_wlan_vmmc: wlan_vmmcgrp {
		fsl,pins = <
		MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0
		>;
		};

		pinctrl_rtc: rtcgrp {
		fsl,pins = <
		MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0
		>;
		};

		pinctrl_sgtl5000: sgtl5000grp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
		MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
		>;
		};

		pinctrl_uart1: uart1grp {
		fsl,pins = <
		MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
		MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_uart2: uart2grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
		MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_uart3: uart3grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
		MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
		MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
		MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
		>;
		};

		pinctrl_usbotg: usbotggrp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
		MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
		/* power enable, high active */
		MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
		>;
		};

		pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
		MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
		MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
		MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
		MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
		MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
		MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
		>;
		};

		pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <
		MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
		MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
		MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
		MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
		MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
		MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
		>;
		};
		};
		};

		&ldb {
		status = "okay";

		lvds-channel@0 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <18>;
		status = "okay";

		port@4 {
		reg = <4>;

		lvds0_out: endpoint {
		remote-endpoint = <&panel_in_lvds0>;
		};
		};
		};
		};

		&pcie {
		status = "okay";
		};

		&pwm1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm1>;
		status = "okay";
		};

		&pwm3 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm3>;
		status = "okay";
		};

		&pwm4 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm4>;
		status = "okay";
		};

		&ssi1 {
		status = "okay";
		};

		&uart1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart1>;
		status = "okay";
		};

		&uart2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart2>;
		status = "okay";
		};

		&uart3 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart3>;
		fsl,uart-has-rtscts;
		status = "okay";
		};

		&usbh1 {
		status = "okay";
		};

		&usbotg {
		vbus-supply = <&reg_usb_otg_vbus>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbotg>;
		disable-over-current;
		status = "okay";
		};

		&usdhc2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc2>;
		bus-width = <4>;
		non-removable;
		vmmc-supply = <&reg_3p3v>;
		vqmmc-supply = <&reg_wlan_vmmc>;
		vqmmc-1-8-v;
		ocr-limit = <0x180>; /* 1.65v - 2.1v */
		cap-power-off-card;
		keep-power-in-suspend;
		status = "okay";
		};

		&usdhc3 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc3>;
		cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
		vmmc-supply = <&reg_3p3v>;
		status = "okay";
		};