Commit 34832dc4 authored Nov 17, 2017 by Sascha Hauer Committed by Boris Brezillon Nov 30, 2017

mtd: nand: gpmi-nand: Remove wrong Kconfig help text



The GPMI nand Kconfig help texts mentions that the GPMI nand driver
might conflict with SD cards. The only conflict there might really
be is that both controllers use the same pins, but this is resolved
by the pincontroller setup in the device tree. In any way the GPMI
driver can safely be enabled, the text is just wrong. Remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

parent 26f0740e

drivers/mtd/nand/Kconfig

+1 −3

Original line number	Diff line number	Diff line
		@@ -376,9 +376,7 @@ config MTD_NAND_GPMI_NAND
		Enables NAND Flash support for IMX23, IMX28 or IMX6.
		The GPMI controller is very powerful, with the help of BCH
		module, it can do the hardware ECC. The GPMI supports several
		NAND flashs at the same time. The GPMI may conflicts with other
		block, such as SD card. So pay attention to it when you enable
		the GPMI.
		NAND flashs at the same time.

		config MTD_NAND_BRCMNAND
		tristate "Broadcom STB NAND controller"