Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 29baa82a authored by Dave Airlie's avatar Dave Airlie
Browse files

Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next 

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...
parents e19b205b ac6c35a4

Documentation/admin-guide/kernel-parameters.txt

+1 −1
Original line number Diff line number Diff line
@@ -854,7 +854,7 @@ 
			The filter can be disabled or changed to another

			driver later using sysfs.



	drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]

	drm.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]

			Broken monitors, graphic adapters, KVMs and EDIDless

			panels may send no or incorrect EDID data sets.

			This parameter allows to specify an EDID data sets

Documentation/devicetree/bindings/display/faraday,tve200.txt

0 → 100644
+54 −0
Original line number Diff line number Diff line 
* Faraday TV Encoder TVE200



Required properties:



- compatible: must be one of:

	"faraday,tve200"

	"cortina,gemini-tvc", "faraday,tve200"



- reg: base address and size of the control registers block



- interrupts: contains an interrupt specifier for the interrupt

	line from the TVE200



- clock-names: should contain "PCLK" for the clock line clocking the

	silicon and "TVE" for the 27MHz clock to the video driver



- clocks: contains phandle and clock specifier pairs for the entries

	in the clock-names property. See

	Documentation/devicetree/bindings/clock/clock-bindings.txt



Optional properties:



- resets: contains the reset line phandle for the block



Required sub-nodes:



- port: describes LCD panel signals, following the common binding

	for video transmitter interfaces; see

	Documentation/devicetree/bindings/media/video-interfaces.txt

	This port should have the properties:

	reg = <0>;

	It should have one endpoint connected to a remote endpoint where

	the display is connected.



Example:



display-controller@6a000000 {

	#address-cells = <1>;

	#size-cells = <0>;

	compatible = "faraday,tve200";

	reg = <0x6a000000 0x1000>;

	interrupts = <13 IRQ_TYPE_EDGE_RISING>;

	resets = <&syscon GEMINI_RESET_TVC>;

	clocks = <&syscon GEMINI_CLK_GATE_TVC>,

		 <&syscon GEMINI_CLK_TVC>;

	clock-names = "PCLK", "TVE";



	port@0 {

		reg = <0>;

		display_out: endpoint {

			remote-endpoint = <&panel_in>;

		};

	};

};

Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt

0 → 100644
+21 −0
Original line number Diff line number Diff line 
Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)



The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using

a MIPI-DSI video interface. Its backlight is managed through the DSI link.



Required properties:

  - compatible: "orisetech,otm8009a"

  - reg: the virtual channel number of a DSI peripheral



Optional properties:

  - reset-gpios: a GPIO spec for the reset pin (active low).



Example:

&dsi {

	...

	panel@0 {

		compatible = "orisetech,otm8009a";

		reg = <0>;

		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;

	};

};

Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt

0 → 100644
+24 −0
Original line number Diff line number Diff line 
Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)



Required properties:

  - compatible: "samsung,s6e63j0x03"

  - reg: the virtual channel number of a DSI peripheral

  - vdd3-supply: I/O voltage supply

  - vci-supply: voltage supply for analog circuits

  - reset-gpios: a GPIO spec for the reset pin (active low)

  - te-gpios: a GPIO spec for the tearing effect synchronization signal

    gpio pin (active high)



Example:

&dsi {

	...



	panel@0 {

		compatible = "samsung,s6e63j0x03";

		reg = <0>;

		vdd3-supply = <&ldo16_reg>;

		vci-supply = <&ldo20_reg>;

		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;

		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;

	};

};

Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt

0 → 100644
+23 −0
Original line number Diff line number Diff line 
Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel



Required properties:

- compatible: should be "sii,43wvf1g".

- "dvdd-supply": 3v3 digital regulator.

- "avdd-supply": 5v analog regulator.



Optional properties:

- backlight: phandle for the backlight control.



Example:



	panel {

		compatible = "sii,43wvf1g";

		backlight = <&backlight_display>;

		dvdd-supply = <&reg_lcd_3v3>;

		avdd-supply = <&reg_lcd_5v>;

		port {

			panel_in: endpoint {

				remote-endpoint = <&display_out>;

			};

		};

	};