Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 228fc259 authored by MingChia Chung's avatar MingChia Chung Committed by Greg Kroah-Hartman
Browse files

staging: rts5208: Add two blank lines in comments. 



This patch fixes a minor checkpatch warnings:

"WARNING: Block comments use a trailing */ on a separate line"

Signed-off-by: default avatarMing-Chia Chung <Quexint@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent db0c1274

drivers/staging/rts5208/rtsx.c

+28 −14
Original line number Diff line number Diff line
@@ -81,14 +81,16 @@ static int slave_alloc(struct scsi_device *sdev) 


static int slave_configure(struct scsi_device *sdev)

{

	/* Scatter-gather buffers (all but the last) must have a length

	/*

	 * Scatter-gather buffers (all but the last) must have a length

	 * divisible by the bulk maxpacket size.  Otherwise a data packet

	 * would end up being short, causing a premature end to the data

	 * transfer.  Since high-speed bulk pipes have a maxpacket size

	 * of 512, we'll use that as the scsi device queue's DMA alignment

	 * mask.  Guaranteeing proper alignment of the first buffer will

	 * have the desired effect because, except at the beginning and

	 * the end, scatter-gather buffers follow page boundaries. */

	 * the end, scatter-gather buffers follow page boundaries.

	 */

	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));



	/* Set the SCSI level to at least 2.  We'll leave it at 3 if that's
@@ -185,8 +187,10 @@ static int command_abort(struct scsi_cmnd *srb) 
	return SUCCESS;

}



/* This invokes the transport reset mechanism to reset the state of the

 * device */

/*

 * This invokes the transport reset mechanism to reset the state of the

 * device

 */

static int device_reset(struct scsi_cmnd *srb)

{

	int result = 0;
@@ -654,15 +658,19 @@ static void rtsx_release_resources(struct rtsx_dev *dev) 
	kfree(dev->chip);

}



/* First stage of disconnect processing: stop all commands and remove

 * the host */

/*

 * First stage of disconnect processing: stop all commands and remove

 * the host

 */

static void quiesce_and_remove_host(struct rtsx_dev *dev)

{

	struct Scsi_Host *host = rtsx_to_host(dev);

	struct rtsx_chip *chip = dev->chip;



	/* Prevent new transfers, stop the current command, and

	 * interrupt a SCSI-scan or device-reset delay */

	/*

	 * Prevent new transfers, stop the current command, and

	 * interrupt a SCSI-scan or device-reset delay

	 */

	mutex_lock(&dev->dev_mutex);

	scsi_lock(host);

	rtsx_set_stat(chip, RTSX_STAT_DISCONNECT);
@@ -674,9 +682,11 @@ static void quiesce_and_remove_host(struct rtsx_dev *dev) 
	/* Wait some time to let other threads exist */

	wait_timeout(100);



	/* queuecommand won't accept any new commands and the control

	/*

	 * queuecommand won't accept any new commands and the control

	 * thread won't execute a previously-queued command.  If there

	 * is such a command pending, complete it with an error. */

	 * is such a command pending, complete it with an error.

	 */

	mutex_lock(&dev->dev_mutex);

	if (chip->srb) {

		chip->srb->result = DID_NO_CONNECT << 16;
@@ -696,8 +706,10 @@ static void release_everything(struct rtsx_dev *dev) 
{

	rtsx_release_resources(dev);



	/* Drop our reference to the host; the SCSI core will free it

	 * when the refcount becomes 0. */

	/*

	 * Drop our reference to the host; the SCSI core will free it

	 * when the refcount becomes 0.

	 */

	scsi_host_put(rtsx_to_host(dev));

}
@@ -936,8 +948,10 @@ static int rtsx_probe(struct pci_dev *pci, 


	rtsx_init_chip(dev->chip);



	/* set the supported max_lun and max_id for the scsi host

	 * NOTE: the minimal value of max_id is 1 */

	/*

	 * set the supported max_lun and max_id for the scsi host

	 * NOTE: the minimal value of max_id is 1

	 */

	host->max_id = 1;

	host->max_lun = dev->chip->max_lun;