Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 15be8179 authored by Ilya Ledvich's avatar Ilya Ledvich Committed by Tony Lindgren
Browse files

ARM: dts: cm-t335: add initial support 

Add basic support for CompuLab cm-t335 module based on AM335X SoC.

CM-T335 is a tiny computer-on-module (CoM) / system-on-module (SoM)
The module is built around the Texas Instruments Sitara AM3352/4
system-on-chip.

The CPU is supplemented with up-to 512MB DDR3 and up-to 1GB of on-board
NAND storage, WiFi connected to SPI, Bluetooth, Analog audio, Gigabit
Ethernet, CAN bus.

Current patch adds support:
UART0 and GPIO LED

Detailed description can be found at the module site:
http://www.compulab.co.il/products/computer-on-modules/cm-t335/



Signed-off-by: default avatarIlya Ledvich <ilya@compulab.co.il>
[uri.mashiach@compulab.co.il: the default RAM amount reduced to
128MB to support also the minimal module configuration]
Signed-off-by: default avatarUri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: default avatarIgor Grinberg <grinberg@compulab.co.il>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent b6f0f6c4

Documentation/devicetree/bindings/arm/omap/omap.txt

+3 −0
Original line number Original line Diff line number Diff line
@@ -138,6 +138,9 @@ Boards: 
- AM335X phyBOARD-WEGA: Single Board Computer dev kit

- AM335X phyBOARD-WEGA: Single Board Computer dev kit

  compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"

  compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"





- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4

  compatible = "compulab,cm-t335", "ti,am33xx"



- OMAP5 EVM : Evaluation Module

- OMAP5 EVM : Evaluation Module

  compatible = "ti,omap5-evm", "ti,omap5"

  compatible = "ti,omap5-evm", "ti,omap5"

arch/arm/boot/dts/Makefile

+4 −3
Original line number Original line Diff line number Diff line
@@ -459,13 +459,14 @@ dtb-$(CONFIG_SOC_AM33XX) += \ 
	am335x-bone.dtb \

	am335x-bone.dtb \

	am335x-boneblack.dtb \

	am335x-boneblack.dtb \

	am335x-bonegreen.dtb \

	am335x-bonegreen.dtb \

	am335x-sl50.dtb \

	am335x-chiliboard.dtb \

	am335x-cm-t335.dtb \

	am335x-evm.dtb \

	am335x-evm.dtb \

	am335x-evmsk.dtb \

	am335x-evmsk.dtb \

	am335x-lxm.dtb \

	am335x-nano.dtb \

	am335x-nano.dtb \

	am335x-pepper.dtb \

	am335x-pepper.dtb \

	am335x-lxm.dtb \

	am335x-sl50.dtb \

	am335x-chiliboard.dtb \

	am335x-wega-rdk.dtb

	am335x-wega-rdk.dtb

dtb-$(CONFIG_ARCH_OMAP4) += \

dtb-$(CONFIG_ARCH_OMAP4) += \

	omap4-duovero-parlor.dtb \

	omap4-duovero-parlor.dtb \

arch/arm/boot/dts/am335x-cm-t335.dts

0 → 100644
+62 −0
Original line number Original line Diff line number Diff line 
/*

 * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335

 *

 * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



/dts-v1/;



#include "am33xx.dtsi"



/ {

	model = "CompuLab CM-T335";

	compatible = "compulab,cm-t335", "ti,am33xx";



	memory {

		device_type = "memory";

		reg = <0x80000000 0x8000000>;	/* 128 MB */

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&gpio_led_pins>;

		led@0 {

			label = "cm_t335:green";

			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */

			linux,default-trigger = "heartbeat";

		};

	};

};



&am33xx_pinmux {

	pinctrl-names = "default";

	pinctrl-0 = <>;



	gpio_led_pins: pinmux_gpio_led_pins {

		pinctrl-single,pins = <

			/* gpmc_csn3.gpio2_0 */

			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)

		>;

	};



	uart0_pins: pinmux_uart0_pins {

		pinctrl-single,pins = <

			/* uart0_rxd.uart0_rxd */

			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)

			/* uart0_txd.uart0_txd */

			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)

		>;

	};

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins>;



	status = "okay";

};