Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ed7bd661 authored by wenxiong@linux.vnet.ibm.com's avatar wenxiong@linux.vnet.ibm.com Committed by James Bottomley
Browse files

[SCSI] ipr: IOA Status Code(IOASC) update 



Signed-off-by: default avatarWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: default avatarBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 66c28f97

drivers/scsi/ipr.c

+39 −1
Original line number Diff line number Diff line
@@ -281,12 +281,22 @@ struct ipr_error_table_t ipr_error_table[] = { 
	"FFF6: Failure prediction threshold exceeded"},

	{0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL,

	"8009: Impending cache battery pack failure"},

	{0x02040100, 0, 0,

	"Logical Unit in process of becoming ready"},

	{0x02040200, 0, 0,

	"Initializing command required"},

	{0x02040400, 0, 0,

	"34FF: Disk device format in progress"},

	{0x02040C00, 0, 0,

	"Logical unit not accessible, target port in unavailable state"},

	{0x02048000, 0, IPR_DEFAULT_LOG_LEVEL,

	"9070: IOA requested reset"},

	{0x023F0000, 0, 0,

	"Synchronization required"},

	{0x02408500, 0, 0,

	"IOA microcode download required"},

	{0x02408600, 0, 0,

	"Device bus connection is prohibited by host"},

	{0x024E0000, 0, 0,

	"No ready, IOA shutdown"},

	{0x025A0000, 0, 0,
@@ -385,6 +395,8 @@ struct ipr_error_table_t ipr_error_table[] = { 
	"4030: Incorrect multipath connection"},

	{0x04679000, 0, IPR_DEFAULT_LOG_LEVEL,

	"4110: Unsupported enclosure function"},

	{0x04679800, 0, IPR_DEFAULT_LOG_LEVEL,

	"4120: SAS cable VPD cannot be read"},

	{0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL,

	"FFF4: Command to logical unit failed"},

	{0x05240000, 1, 0,
@@ -407,10 +419,18 @@ struct ipr_error_table_t ipr_error_table[] = { 
	"Illegal request, command sequence error"},

	{0x052C8000, 1, 0,

	"Illegal request, dual adapter support not enabled"},

	{0x052C8100, 1, 0,

	"Illegal request, another cable connector was physically disabled"},

	{0x054E8000, 1, 0,

	"Illegal request, inconsistent group id/group count"},

	{0x06040500, 0, IPR_DEFAULT_LOG_LEVEL,

	"9031: Array protection temporarily suspended, protection resuming"},

	{0x06040600, 0, IPR_DEFAULT_LOG_LEVEL,

	"9040: Array protection temporarily suspended, protection resuming"},

	{0x060B0100, 0, IPR_DEFAULT_LOG_LEVEL,

	"4080: IOA exceeded maximum operating temperature"},

	{0x060B8000, 0, IPR_DEFAULT_LOG_LEVEL,

	"4085: Service required"},

	{0x06288000, 0, IPR_DEFAULT_LOG_LEVEL,

	"3140: Device bus not ready to ready transition"},

	{0x06290000, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -423,6 +443,8 @@ struct ipr_error_table_t ipr_error_table[] = { 
	"FFFB: SCSI bus was reset by another initiator"},

	{0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL,

	"3029: A device replacement has occurred"},

	{0x063F8300, 0, IPR_DEFAULT_LOG_LEVEL,

	"4102: Device bus fabric performance degradation"},

	{0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL,

	"9051: IOA cache data exists for a missing or failed device"},

	{0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -445,6 +467,14 @@ struct ipr_error_table_t ipr_error_table[] = { 
	"9076: Configuration error, missing remote IOA"},

	{0x06679100, 0, IPR_DEFAULT_LOG_LEVEL,

	"4050: Enclosure does not support a required multipath function"},

	{0x06679800, 0, IPR_DEFAULT_LOG_LEVEL,

	"4121: Configuration error, required cable is missing"},

	{0x06679900, 0, IPR_DEFAULT_LOG_LEVEL,

	"4122: Cable is not plugged into the correct location on remote IOA"},

	{0x06679A00, 0, IPR_DEFAULT_LOG_LEVEL,

	"4123: Configuration error, invalid cable vital product data"},

	{0x06679B00, 0, IPR_DEFAULT_LOG_LEVEL,

	"4124: Configuration error, both cable ends are plugged into the same IOA"},

	{0x06690000, 0, IPR_DEFAULT_LOG_LEVEL,

	"4070: Logically bad block written on device"},

	{0x06690200, 0, IPR_DEFAULT_LOG_LEVEL,
@@ -507,10 +537,18 @@ struct ipr_error_table_t ipr_error_table[] = { 
	"9062: One or more disks are missing from an array"},

	{0x07279900, 0, IPR_DEFAULT_LOG_LEVEL,

	"9063: Maximum number of functional arrays has been exceeded"},

	{0x07279A00, 0, 0,

	"Data protect, other volume set problem"},

	{0x0B260000, 0, 0,

	"Aborted command, invalid descriptor"},

	{0x0B3F9000, 0, 0,

	"Target operating conditions have changed, dual adapter takeover"},

	{0x0B530200, 0, 0,

	"Aborted command, medium removal prevented"},

	{0x0B5A0000, 0, 0,

	"Command terminated by host"}

	"Command terminated by host"},

	{0x0B5B8000, 0, 0,

	"Aborted command, command terminated by host"}

};



static const struct ipr_ses_table_entry ipr_ses_table[] = {