Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc (ed0da6fc) · Commits · e / devices / android_kernel_teracube_2e

Documentation/powerpc/booting-without-of.txt

+5 −5

Original line number	Diff line number	Diff line
		@@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
		- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
		- compatible : Should be "gianfar"
		- reg : Offset and length of the register set for the device
		- address : List of bytes representing the ethernet address of
		- mac-address : List of bytes representing the ethernet address of
		this controller
		- interrupts : <a b> where a is the interrupt number and b is a
		field that represents an encoding of the sense and level
		@@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
		model = "TSEC";
		compatible = "gianfar";
		reg = <24000 1000>;
		address = [ 00 E0 0C 00 73 00 ];
		mac-address = [ 00 E0 0C 00 73 00 ];
		interrupts = <d 3 e 3 12 3>;
		interrupt-parent = <40000>;
		phy-handle = <2452000>
		@@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
		model = "TSEC";
		compatible = "gianfar";
		reg = <24000 1000>;
		address = [ 00 E0 0C 00 73 00 ];
		mac-address = [ 00 E0 0C 00 73 00 ];
		interrupts = <d 3 e 3 12 3>;
		interrupt-parent = <40000>;
		phy-handle = <2452000>;
		@@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
		model = "TSEC";
		compatible = "gianfar";
		reg = <25000 1000>;
		address = [ 00 E0 0C 00 73 01 ];
		mac-address = [ 00 E0 0C 00 73 01 ];
		interrupts = <13 3 14 3 18 3>;
		interrupt-parent = <40000>;
		phy-handle = <2452001>;
		@@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
		model = "FEC";
		compatible = "gianfar";
		reg = <26000 1000>;
		address = [ 00 E0 0C 00 73 02 ];
		mac-address = [ 00 E0 0C 00 73 02 ];
		interrupts = <19 3>;
		interrupt-parent = <40000>;
		phy-handle = <2452002>;

arch/powerpc/Kconfig

+4 −3

Original line number	Diff line number	Diff line
		@@ -836,9 +836,10 @@ config MCA
		bool

		config PCI
		bool "PCI support" if 40x \|\| CPM2 \|\| PPC_83xx \|\| PPC_85xx \|\| PPC_MPC52xx \|\| (EMBEDDED && PPC_ISERIES) \
		\|\| MPC7448HPC2
		default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
		bool "PCI support" if 40x \|\| CPM2 \|\| PPC_83xx \|\| PPC_85xx \|\| PPC_86xx \
		\|\| PPC_MPC52xx \|\| (EMBEDDED && PPC_ISERIES) \|\| MPC7448HPC2
		default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
		&& !PPC_85xx && !PPC_86xx
		default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
		default PCI_QSPAN if !4xx && !CPM2 && 8xx
		help

arch/powerpc/boot/dts/mpc8641_hpcn.dts

0 → 100644

+339 −0

Original line number	Diff line number	Diff line
		/*
		* MPC8641 HPCN Device Tree Source
		*
		* Copyright 2006 Freescale Semiconductor Inc.
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License as published by the
		* Free Software Foundation; either version 2 of the License, or (at your
		* option) any later version.
		*/


		/ {
		model = "MPC8641HPCN";
		compatible = "mpc86xx";
		#address-cells = <1>;
		#size-cells = <1>;

		cpus {
		#cpus = <2>;
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8641@0 {
		device_type = "cpu";
		reg = <0>;
		d-cache-line-size = <20>; // 32 bytes
		i-cache-line-size = <20>; // 32 bytes
		d-cache-size = <8000>; // L1, 32K
		i-cache-size = <8000>; // L1, 32K
		timebase-frequency = <0>; // 33 MHz, from uboot
		bus-frequency = <0>; // From uboot
		clock-frequency = <0>; // From uboot
		32-bit;
		linux,boot-cpu;
		};
		PowerPC,8641@1 {
		device_type = "cpu";
		reg = <1>;
		d-cache-line-size = <20>; // 32 bytes
		i-cache-line-size = <20>; // 32 bytes
		d-cache-size = <8000>; // L1, 32K
		i-cache-size = <8000>; // L1, 32K
		timebase-frequency = <0>; // 33 MHz, from uboot
		bus-frequency = <0>; // From uboot
		clock-frequency = <0>; // From uboot
		32-bit;
		};
		};

		memory {
		device_type = "memory";
		reg = <00000000 40000000>; // 1G at 0x0
		};

		soc8641@f8000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		#interrupt-cells = <2>;
		device_type = "soc";
		ranges = <0 f8000000 00100000>;
		reg = <f8000000 00100000>; // CCSRBAR 1M
		bus-frequency = <0>;

		i2c@3000 {
		device_type = "i2c";
		compatible = "fsl-i2c";
		reg = <3000 100>;
		interrupts = <2b 2>;
		interrupt-parent = <40000>;
		dfsrr;
		};

		i2c@3100 {
		device_type = "i2c";
		compatible = "fsl-i2c";
		reg = <3100 100>;
		interrupts = <2b 2>;
		interrupt-parent = <40000>;
		dfsrr;
		};

		mdio@24520 {
		#address-cells = <1>;
		#size-cells = <0>;
		device_type = "mdio";
		compatible = "gianfar";
		reg = <24520 20>;
		linux,phandle = <24520>;
		ethernet-phy@0 {
		linux,phandle = <2452000>;
		interrupt-parent = <40000>;
		interrupts = <4a 1>;
		reg = <0>;
		device_type = "ethernet-phy";
		};
		ethernet-phy@1 {
		linux,phandle = <2452001>;
		interrupt-parent = <40000>;
		interrupts = <4a 1>;
		reg = <1>;
		device_type = "ethernet-phy";
		};
		ethernet-phy@2 {
		linux,phandle = <2452002>;
		interrupt-parent = <40000>;
		interrupts = <4a 1>;
		reg = <2>;
		device_type = "ethernet-phy";
		};
		ethernet-phy@3 {
		linux,phandle = <2452003>;
		interrupt-parent = <40000>;
		interrupts = <4a 1>;
		reg = <3>;
		device_type = "ethernet-phy";
		};
		};

		ethernet@24000 {
		#address-cells = <1>;
		#size-cells = <0>;
		device_type = "network";
		model = "TSEC";
		compatible = "gianfar";
		reg = <24000 1000>;
		mac-address = [ 00 E0 0C 00 73 00 ];
		interrupts = <1d 2 1e 2 22 2>;
		interrupt-parent = <40000>;
		phy-handle = <2452000>;
		};

		ethernet@25000 {
		#address-cells = <1>;
		#size-cells = <0>;
		device_type = "network";
		model = "TSEC";
		compatible = "gianfar";
		reg = <25000 1000>;
		mac-address = [ 00 E0 0C 00 73 01 ];
		interrupts = <23 2 24 2 28 2>;
		interrupt-parent = <40000>;
		phy-handle = <2452001>;
		};

		ethernet@26000 {
		#address-cells = <1>;
		#size-cells = <0>;
		device_type = "network";
		model = "TSEC";
		compatible = "gianfar";
		reg = <26000 1000>;
		mac-address = [ 00 E0 0C 00 02 FD ];
		interrupts = <1F 2 20 2 21 2>;
		interrupt-parent = <40000>;
		phy-handle = <2452002>;
		};

		ethernet@27000 {
		#address-cells = <1>;
		#size-cells = <0>;
		device_type = "network";
		model = "TSEC";
		compatible = "gianfar";
		reg = <27000 1000>;
		mac-address = [ 00 E0 0C 00 03 FD ];
		interrupts = <25 2 26 2 27 2>;
		interrupt-parent = <40000>;
		phy-handle = <2452003>;
		};
		serial@4500 {
		device_type = "serial";
		compatible = "ns16550";
		reg = <4500 100>;
		clock-frequency = <0>;
		interrupts = <2a 2>;
		interrupt-parent = <40000>;
		};

		serial@4600 {
		device_type = "serial";
		compatible = "ns16550";
		reg = <4600 100>;
		clock-frequency = <0>;
		interrupts = <1c 2>;
		interrupt-parent = <40000>;
		};

		pci@8000 {
		compatible = "86xx";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <8000 1000>;
		bus-range = <0 fe>;
		ranges = <02000000 0 80000000 80000000 0 20000000
		01000000 0 00000000 e2000000 0 00100000>;
		clock-frequency = <1fca055>;
		interrupt-parent = <40000>;
		interrupts = <18 2>;
		interrupt-map-mask = <f800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x11 */
		8800 0 0 1 4d0 3 2
		8800 0 0 2 4d0 4 2
		8800 0 0 3 4d0 5 2
		8800 0 0 4 4d0 6 2

		/* IDSEL 0x12 */
		9000 0 0 1 4d0 4 2
		9000 0 0 2 4d0 5 2
		9000 0 0 3 4d0 6 2
		9000 0 0 4 4d0 3 2

		/* IDSEL 0x13 */
		9800 0 0 1 4d0 0 0
		9800 0 0 2 4d0 0 0
		9800 0 0 3 4d0 0 0
		9800 0 0 4 4d0 0 0

		/* IDSEL 0x14 */
		a000 0 0 1 4d0 0 0
		a000 0 0 2 4d0 0 0
		a000 0 0 3 4d0 0 0
		a000 0 0 4 4d0 0 0

		/* IDSEL 0x15 */
		a800 0 0 1 4d0 0 0
		a800 0 0 2 4d0 0 0
		a800 0 0 3 4d0 0 0
		a800 0 0 4 4d0 0 0

		/* IDSEL 0x16 */
		b000 0 0 1 4d0 0 0
		b000 0 0 2 4d0 0 0
		b000 0 0 3 4d0 0 0
		b000 0 0 4 4d0 0 0

		/* IDSEL 0x17 */
		b800 0 0 1 4d0 0 0
		b800 0 0 2 4d0 0 0
		b800 0 0 3 4d0 0 0
		b800 0 0 4 4d0 0 0

		/* IDSEL 0x18 */
		c000 0 0 1 4d0 0 0
		c000 0 0 2 4d0 0 0
		c000 0 0 3 4d0 0 0
		c000 0 0 4 4d0 0 0

		/* IDSEL 0x19 */
		c800 0 0 1 4d0 0 0
		c800 0 0 2 4d0 0 0
		c800 0 0 3 4d0 0 0
		c800 0 0 4 4d0 0 0

		/* IDSEL 0x1a */
		d000 0 0 1 4d0 6 2
		d000 0 0 2 4d0 3 2
		d000 0 0 3 4d0 4 2
		d000 0 0 4 4d0 5 2


		/* IDSEL 0x1b */
		d800 0 0 1 4d0 5 2
		d800 0 0 2 4d0 0 0
		d800 0 0 3 4d0 0 0
		d800 0 0 4 4d0 0 0

		/* IDSEL 0x1c */
		e000 0 0 1 4d0 9 2
		e000 0 0 2 4d0 a 2
		e000 0 0 3 4d0 c 2
		e000 0 0 4 4d0 7 2

		/* IDSEL 0x1d */
		e800 0 0 1 4d0 9 2
		e800 0 0 2 4d0 a 2
		e800 0 0 3 4d0 b 2
		e800 0 0 4 4d0 0 0

		/* IDSEL 0x1e */
		f000 0 0 1 4d0 c 2
		f000 0 0 2 4d0 0 0
		f000 0 0 3 4d0 0 0
		f000 0 0 4 4d0 0 0

		/* IDSEL 0x1f */
		f800 0 0 1 4d0 6 2
		f800 0 0 2 4d0 0 0
		f800 0 0 3 4d0 0 0
		f800 0 0 4 4d0 0 0
		>;
		i8259@4d0 {
		linux,phandle = <4d0>;
		clock-frequency = <0>;
		interrupt-controller;
		device_type = "interrupt-controller";
		#address-cells = <0>;
		#interrupt-cells = <2>;
		built-in;
		compatible = "chrp,iic";
		big-endian;
		interrupts = <49 2>;
		interrupt-parent = <40000>;
		};

		};
		pic@40000 {
		linux,phandle = <40000>;
		clock-frequency = <0>;
		interrupt-controller;
		#address-cells = <0>;
		#interrupt-cells = <2>;
		reg = <40000 40000>;
		built-in;
		compatible = "chrp,open-pic";
		device_type = "open-pic";
		big-endian;
		interrupts = <
		10 2 11 2 12 2 13 2
		14 2 15 2 16 2 17 2
		18 2 19 2 1a 2 1b 2
		1c 2 1d 2 1e 2 1f 2
		20 2 21 2 22 2 23 2
		24 2 25 2 26 2 27 2
		28 2 29 2 2a 2 2b 2
		2c 2 2d 2 2e 2 2f 2
		30 2 31 2 32 2 33 2
		34 2 35 2 36 2 37 2
		38 2 39 2 2a 2 3b 2
		3c 2 3d 2 3e 2 3f 2
		48 1 49 2 4a 1
		>;
		interrupt-parent = <40000>;
		};
		};
		};

arch/powerpc/configs/g5_defconfig

+98 −24

Original line number	Diff line number	Diff line
		#
		# Automatically generated make config: don't edit
		# Linux kernel version: 2.6.17-rc1
		# Wed Apr 19 13:24:37 2006
		# Linux kernel version: 2.6.18-rc3
		# Tue Aug 8 09:12:29 2006
		#
		CONFIG_PPC64=y
		CONFIG_64BIT=y
		CONFIG_PPC_MERGE=y
		CONFIG_MMU=y
		CONFIG_GENERIC_HARDIRQS=y
		CONFIG_IRQ_PER_CPU=y
		CONFIG_RWSEM_XCHGADD_ALGORITHM=y
		CONFIG_GENERIC_HWEIGHT=y
		CONFIG_GENERIC_CALIBRATE_DELAY=y
		CONFIG_GENERIC_FIND_NEXT_BIT=y
		CONFIG_PPC=y
		CONFIG_EARLY_PRINTK=y
		CONFIG_COMPAT=y
		@@ -33,6 +35,7 @@ CONFIG_PPC_STD_MMU=y
		CONFIG_VIRT_CPU_ACCOUNTING=y
		CONFIG_SMP=y
		CONFIG_NR_CPUS=4
		CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

		#
		# Code maturity level options
		@@ -50,6 +53,7 @@ CONFIG_SWAP=y
		CONFIG_SYSVIPC=y
		CONFIG_POSIX_MQUEUE=y
		# CONFIG_BSD_PROCESS_ACCT is not set
		# CONFIG_TASKSTATS is not set
		CONFIG_SYSCTL=y
		# CONFIG_AUDIT is not set
		CONFIG_IKCONFIG=y
		@@ -67,10 +71,12 @@ CONFIG_PRINTK=y
		CONFIG_BUG=y
		CONFIG_ELF_CORE=y
		CONFIG_BASE_FULL=y
		CONFIG_RT_MUTEXES=y
		CONFIG_FUTEX=y
		CONFIG_EPOLL=y
		CONFIG_SHMEM=y
		CONFIG_SLAB=y
		CONFIG_VM_EVENT_COUNTERS=y
		# CONFIG_TINY_SHMEM is not set
		CONFIG_BASE_SMALL=0
		# CONFIG_SLOB is not set
		@@ -116,12 +122,16 @@ CONFIG_PPC_PMAC=y
		CONFIG_PPC_PMAC64=y
		# CONFIG_PPC_MAPLE is not set
		# CONFIG_PPC_CELL is not set
		# CONFIG_PPC_CELL_NATIVE is not set
		# CONFIG_PPC_IBM_CELL_BLADE is not set
		# CONFIG_UDBG_RTAS_CONSOLE is not set
		CONFIG_U3_DART=y
		CONFIG_MPIC=y
		# CONFIG_PPC_RTAS is not set
		# CONFIG_MMIO_NVRAM is not set
		CONFIG_MPIC_BROKEN_U3=y
		# CONFIG_PPC_MPC106 is not set
		CONFIG_PPC_970_NAP=y
		CONFIG_CPU_FREQ=y
		CONFIG_CPU_FREQ_TABLE=y
		# CONFIG_CPU_FREQ_DEBUG is not set
		@@ -153,6 +163,7 @@ CONFIG_BINFMT_ELF=y
		CONFIG_FORCE_MAX_ZONEORDER=13
		CONFIG_IOMMU_VMERGE=y
		# CONFIG_HOTPLUG_CPU is not set
		CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
		CONFIG_KEXEC=y
		# CONFIG_CRASH_DUMP is not set
		CONFIG_IRQ_ALL_CPUS=y
		@@ -168,6 +179,7 @@ CONFIG_FLATMEM=y
		CONFIG_FLAT_NODE_MEM_MAP=y
		# CONFIG_SPARSEMEM_STATIC is not set
		CONFIG_SPLIT_PTLOCK_CPUS=4
		CONFIG_RESOURCES_64BIT=y
		# CONFIG_PPC_64K_PAGES is not set
		# CONFIG_SCHED_SMT is not set
		CONFIG_PROC_DEVICETREE=y
		@@ -184,6 +196,7 @@ CONFIG_GENERIC_ISA_DMA=y
		# CONFIG_PPC_INDIRECT_PCI is not set
		CONFIG_PCI=y
		CONFIG_PCI_DOMAINS=y
		# CONFIG_PCIEPORTBUS is not set
		# CONFIG_PCI_DEBUG is not set

		#
		@@ -227,6 +240,8 @@ CONFIG_INET_ESP=m
		CONFIG_INET_IPCOMP=m
		CONFIG_INET_XFRM_TUNNEL=m
		CONFIG_INET_TUNNEL=y
		CONFIG_INET_XFRM_MODE_TRANSPORT=y
		CONFIG_INET_XFRM_MODE_TUNNEL=y
		CONFIG_INET_DIAG=y
		CONFIG_INET_TCP_DIAG=y
		# CONFIG_TCP_CONG_ADVANCED is not set
		@@ -239,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y
		# CONFIG_IPV6 is not set
		# CONFIG_INET6_XFRM_TUNNEL is not set
		# CONFIG_INET6_TUNNEL is not set
		# CONFIG_NETWORK_SECMARK is not set
		CONFIG_NETFILTER=y
		# CONFIG_NETFILTER_DEBUG is not set

		@@ -263,6 +279,7 @@ CONFIG_IP_NF_TFTP=m
		CONFIG_IP_NF_AMANDA=m
		# CONFIG_IP_NF_PPTP is not set
		# CONFIG_IP_NF_H323 is not set
		# CONFIG_IP_NF_SIP is not set
		CONFIG_IP_NF_QUEUE=m

		#
		@@ -318,6 +335,7 @@ CONFIG_STANDALONE=y
		CONFIG_PREVENT_FIRMWARE_BUILD=y
		CONFIG_FW_LOADER=y
		# CONFIG_DEBUG_DRIVER is not set
		# CONFIG_SYS_HYPERVISOR is not set

		#
		# Connector - unified userspace <-> kernelspace linker
		@@ -355,6 +373,7 @@ CONFIG_BLK_DEV_NBD=m
		CONFIG_BLK_DEV_RAM=y
		CONFIG_BLK_DEV_RAM_COUNT=16
		CONFIG_BLK_DEV_RAM_SIZE=65536
		CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
		CONFIG_BLK_DEV_INITRD=y
		CONFIG_CDROM_PKTCDVD=m
		CONFIG_CDROM_PKTCDVD_BUFFERS=8
		@@ -417,7 +436,6 @@ CONFIG_IDEDMA_PCI_AUTO=y
		CONFIG_BLK_DEV_IDE_PMAC=y
		CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
		CONFIG_BLK_DEV_IDEDMA_PMAC=y
		# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
		# CONFIG_IDE_ARM is not set
		CONFIG_BLK_DEV_IDEDMA=y
		# CONFIG_IDEDMA_IVB is not set
		@@ -478,6 +496,7 @@ CONFIG_SCSI_SATA_SVW=y
		# CONFIG_SCSI_SATA_MV is not set
		# CONFIG_SCSI_SATA_NV is not set
		# CONFIG_SCSI_PDC_ADMA is not set
		# CONFIG_SCSI_HPTIOP is not set
		# CONFIG_SCSI_SATA_QSTOR is not set
		# CONFIG_SCSI_SATA_PROMISE is not set
		# CONFIG_SCSI_SATA_SX4 is not set
		@@ -497,7 +516,6 @@ CONFIG_SCSI_SATA_SVW=y
		# CONFIG_SCSI_INIA100 is not set
		# CONFIG_SCSI_SYM53C8XX_2 is not set
		# CONFIG_SCSI_IPR is not set
		# CONFIG_SCSI_QLOGIC_FC is not set
		# CONFIG_SCSI_QLOGIC_1280 is not set
		# CONFIG_SCSI_QLA_FC is not set
		# CONFIG_SCSI_LPFC is not set
		@@ -514,9 +532,7 @@ CONFIG_MD_LINEAR=y
		CONFIG_MD_RAID0=y
		CONFIG_MD_RAID1=y
		CONFIG_MD_RAID10=m
		CONFIG_MD_RAID5=y
		# CONFIG_MD_RAID5_RESHAPE is not set
		CONFIG_MD_RAID6=m
		# CONFIG_MD_RAID456 is not set
		CONFIG_MD_MULTIPATH=m
		CONFIG_MD_FAULTY=m
		CONFIG_BLK_DEV_DM=y
		@@ -559,7 +575,6 @@ CONFIG_IEEE1394_OHCI1394=y
		#
		CONFIG_IEEE1394_VIDEO1394=m
		CONFIG_IEEE1394_SBP2=m
		# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
		CONFIG_IEEE1394_ETH1394=m
		CONFIG_IEEE1394_DV1394=m
		CONFIG_IEEE1394_RAWIO=y
		@@ -573,6 +588,7 @@ CONFIG_IEEE1394_RAWIO=y
		# Macintosh device drivers
		#
		CONFIG_ADB_PMU=y
		# CONFIG_ADB_PMU_LED is not set
		CONFIG_PMAC_SMU=y
		CONFIG_THERM_PM72=y
		CONFIG_WINDFARM=y
		@@ -643,6 +659,7 @@ CONFIG_TIGON3=y
		# CONFIG_CHELSIO_T1 is not set
		# CONFIG_IXGB is not set
		# CONFIG_S2IO is not set
		# CONFIG_MYRI10GE is not set

		#
		# Token Ring devices
		@@ -739,6 +756,7 @@ CONFIG_SERIO=y
		CONFIG_VT=y
		CONFIG_VT_CONSOLE=y
		CONFIG_HW_CONSOLE=y
		# CONFIG_VT_HW_CONSOLE_BINDING is not set
		# CONFIG_SERIAL_NONSTANDARD is not set

		#
		@@ -754,6 +772,7 @@ CONFIG_HW_CONSOLE=y
		CONFIG_UNIX98_PTYS=y
		CONFIG_LEGACY_PTYS=y
		CONFIG_LEGACY_PTY_COUNT=256
		# CONFIG_BRIQ_PANEL is not set

		#
		# IPMI
		@@ -764,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256
		# Watchdog Cards
		#
		# CONFIG_WATCHDOG is not set
		# CONFIG_HW_RANDOM is not set
		CONFIG_GEN_RTC=y
		# CONFIG_GEN_RTC_X is not set
		# CONFIG_DTLK is not set
		@@ -774,6 +794,7 @@ CONFIG_GEN_RTC=y
		# Ftape, the floppy tape device driver
		#
		CONFIG_AGP=m
		# CONFIG_AGP_SIS is not set
		# CONFIG_AGP_VIA is not set
		CONFIG_AGP_UNINORTH=m
		# CONFIG_DRM is not set
		@@ -813,6 +834,7 @@ CONFIG_I2C_ALGOBIT=y
		# CONFIG_I2C_PIIX4 is not set
		CONFIG_I2C_POWERMAC=y
		# CONFIG_I2C_NFORCE2 is not set
		# CONFIG_I2C_OCORES is not set
		# CONFIG_I2C_PARPORT_LIGHT is not set
		# CONFIG_I2C_PROSAVAGE is not set
		# CONFIG_I2C_SAVAGE4 is not set
		@@ -849,7 +871,6 @@ CONFIG_I2C_POWERMAC=y
		#
		# Dallas's 1-wire bus
		#
		# CONFIG_W1 is not set

		#
		# Hardware Monitoring support
		@@ -865,6 +886,7 @@ CONFIG_I2C_POWERMAC=y
		# Multimedia devices
		#
		# CONFIG_VIDEO_DEV is not set
		CONFIG_VIDEO_V4L2=y

		#
		# Digital Video Broadcasting Devices
		@@ -875,22 +897,19 @@ CONFIG_I2C_POWERMAC=y
		#
		# Graphics support
		#
		CONFIG_FIRMWARE_EDID=y
		CONFIG_FB=y
		CONFIG_FB_CFB_FILLRECT=y
		CONFIG_FB_CFB_COPYAREA=y
		CONFIG_FB_CFB_IMAGEBLIT=y
		CONFIG_FB_MACMODES=y
		CONFIG_FB_FIRMWARE_EDID=y
		# CONFIG_FB_BACKLIGHT is not set
		CONFIG_FB_MODE_HELPERS=y
		CONFIG_FB_TILEBLITTING=y
		# CONFIG_FB_CIRRUS is not set
		# CONFIG_FB_PM2 is not set
		# CONFIG_FB_CYBER2000 is not set
		CONFIG_FB_OF=y
		# CONFIG_FB_CONTROL is not set
		# CONFIG_FB_PLATINUM is not set
		# CONFIG_FB_VALKYRIE is not set
		# CONFIG_FB_CT65550 is not set
		# CONFIG_FB_ASILIANT is not set
		# CONFIG_FB_IMSTT is not set
		# CONFIG_FB_VGA16 is not set
		@@ -990,6 +1009,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
		# CONFIG_SND_CMIPCI is not set
		# CONFIG_SND_CS4281 is not set
		# CONFIG_SND_CS46XX is not set
		# CONFIG_SND_DARLA20 is not set
		# CONFIG_SND_GINA20 is not set
		# CONFIG_SND_LAYLA20 is not set
		# CONFIG_SND_DARLA24 is not set
		# CONFIG_SND_GINA24 is not set
		# CONFIG_SND_LAYLA24 is not set
		# CONFIG_SND_MONA is not set
		# CONFIG_SND_MIA is not set
		# CONFIG_SND_ECHO3G is not set
		# CONFIG_SND_INDIGO is not set
		# CONFIG_SND_INDIGOIO is not set
		# CONFIG_SND_INDIGODJ is not set
		# CONFIG_SND_EMU10K1 is not set
		# CONFIG_SND_EMU10K1X is not set
		# CONFIG_SND_ENS1370 is not set
		@@ -1026,6 +1057,17 @@ CONFIG_SND_VERBOSE_PROCFS=y
		CONFIG_SND_POWERMAC=m
		CONFIG_SND_POWERMAC_AUTO_DRC=y

		#
		# Apple Onboard Audio driver
		#
		CONFIG_SND_AOA=m
		CONFIG_SND_AOA_FABRIC_LAYOUT=m
		CONFIG_SND_AOA_ONYX=m
		CONFIG_SND_AOA_TAS=m
		CONFIG_SND_AOA_TOONIE=m
		CONFIG_SND_AOA_SOUNDBUS=m
		CONFIG_SND_AOA_SOUNDBUS_I2S=m

		#
		# USB devices
		#
		@@ -1060,6 +1102,7 @@ CONFIG_USB_DEVICEFS=y
		CONFIG_USB_EHCI_HCD=y
		# CONFIG_USB_EHCI_SPLIT_ISO is not set
		# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
		# CONFIG_USB_EHCI_TT_NEWSCHED is not set
		# CONFIG_USB_ISP116X_HCD is not set
		CONFIG_USB_OHCI_HCD=y
		# CONFIG_USB_OHCI_BIG_ENDIAN is not set
		@@ -1110,9 +1153,7 @@ CONFIG_USB_HIDDEV=y
		# CONFIG_USB_ACECAD is not set
		# CONFIG_USB_KBTAB is not set
		# CONFIG_USB_POWERMATE is not set
		# CONFIG_USB_MTOUCH is not set
		# CONFIG_USB_ITMTOUCH is not set
		# CONFIG_USB_EGALAX is not set
		# CONFIG_USB_TOUCHSCREEN is not set
		# CONFIG_USB_YEALINK is not set
		# CONFIG_USB_XPAD is not set
		# CONFIG_USB_ATI_REMOTE is not set
		@@ -1155,6 +1196,7 @@ CONFIG_USB_SERIAL=m
		CONFIG_USB_SERIAL_GENERIC=y
		# CONFIG_USB_SERIAL_AIRPRIME is not set
		# CONFIG_USB_SERIAL_ANYDATA is not set
		# CONFIG_USB_SERIAL_ARK3116 is not set
		CONFIG_USB_SERIAL_BELKIN=m
		# CONFIG_USB_SERIAL_WHITEHEAT is not set
		CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
		@@ -1162,6 +1204,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
		CONFIG_USB_SERIAL_CYPRESS_M8=m
		CONFIG_USB_SERIAL_EMPEG=m
		CONFIG_USB_SERIAL_FTDI_SIO=m
		# CONFIG_USB_SERIAL_FUNSOFT is not set
		CONFIG_USB_SERIAL_VISOR=m
		CONFIG_USB_SERIAL_IPAQ=m
		CONFIG_USB_SERIAL_IR=m
		@@ -1191,9 +1234,11 @@ CONFIG_USB_SERIAL_PL2303=m
		# CONFIG_USB_SERIAL_HP4X is not set
		CONFIG_USB_SERIAL_SAFE=m
		CONFIG_USB_SERIAL_SAFE_PADDED=y
		# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
		CONFIG_USB_SERIAL_TI=m
		CONFIG_USB_SERIAL_CYBERJACK=m
		CONFIG_USB_SERIAL_XIRCOM=m
		# CONFIG_USB_SERIAL_OPTION is not set
		CONFIG_USB_SERIAL_OMNINET=m
		CONFIG_USB_EZUSB=y

		@@ -1207,10 +1252,12 @@ CONFIG_USB_EZUSB=y
		# CONFIG_USB_LEGOTOWER is not set
		# CONFIG_USB_LCD is not set
		# CONFIG_USB_LED is not set
		# CONFIG_USB_CYPRESS_CY7C63 is not set
		# CONFIG_USB_CYTHERM is not set
		# CONFIG_USB_PHIDGETKIT is not set
		# CONFIG_USB_PHIDGETSERVO is not set
		# CONFIG_USB_IDMOUSE is not set
		CONFIG_USB_APPLEDISPLAY=m
		# CONFIG_USB_SISUSBVGA is not set
		# CONFIG_USB_LD is not set
		# CONFIG_USB_TEST is not set
		@@ -1234,6 +1281,14 @@ CONFIG_USB_EZUSB=y
		#
		# CONFIG_NEW_LEDS is not set

		#
		# LED drivers
		#

		#
		# LED Triggers
		#

		#
		# InfiniBand support
		#
		@@ -1248,6 +1303,19 @@ CONFIG_USB_EZUSB=y
		#
		# CONFIG_RTC_CLASS is not set

		#
		# DMA Engine support
		#
		# CONFIG_DMA_ENGINE is not set

		#
		# DMA Clients
		#

		#
		# DMA Devices
		#

		#
		# File systems
		#
		@@ -1273,7 +1341,6 @@ CONFIG_REISERFS_FS_SECURITY=y
		# CONFIG_JFS_FS is not set
		CONFIG_FS_POSIX_ACL=y
		CONFIG_XFS_FS=m
		CONFIG_XFS_EXPORT=y
		# CONFIG_XFS_QUOTA is not set
		CONFIG_XFS_SECURITY=y
		CONFIG_XFS_POSIX_ACL=y
		@@ -1282,6 +1349,7 @@ CONFIG_XFS_POSIX_ACL=y
		# CONFIG_MINIX_FS is not set
		# CONFIG_ROMFS_FS is not set
		CONFIG_INOTIFY=y
		CONFIG_INOTIFY_USER=y
		# CONFIG_QUOTA is not set
		CONFIG_DNOTIFY=y
		CONFIG_AUTOFS_FS=m
		@@ -1363,7 +1431,9 @@ CONFIG_RPCSEC_GSS_KRB5=y
		# CONFIG_SMB_FS is not set
		CONFIG_CIFS=m
		# CONFIG_CIFS_STATS is not set
		# CONFIG_CIFS_WEAK_PW_HASH is not set
		# CONFIG_CIFS_XATTR is not set
		# CONFIG_CIFS_DEBUG2 is not set
		# CONFIG_CIFS_EXPERIMENTAL is not set
		# CONFIG_NCP_FS is not set
		# CONFIG_CODA_FS is not set
		@@ -1444,6 +1514,9 @@ CONFIG_CRC32=y
		CONFIG_LIBCRC32C=m
		CONFIG_ZLIB_INFLATE=y
		CONFIG_ZLIB_DEFLATE=m
		CONFIG_TEXTSEARCH=y
		CONFIG_TEXTSEARCH_KMP=m
		CONFIG_PLIST=y

		#
		# Instrumentation Support
		@@ -1457,14 +1530,19 @@ CONFIG_OPROFILE=y
		#
		# CONFIG_PRINTK_TIME is not set
		CONFIG_MAGIC_SYSRQ=y
		# CONFIG_UNUSED_SYMBOLS is not set
		CONFIG_DEBUG_KERNEL=y
		CONFIG_LOG_BUF_SHIFT=17
		CONFIG_DETECT_SOFTLOCKUP=y
		# CONFIG_SCHEDSTATS is not set
		# CONFIG_DEBUG_SLAB is not set
		CONFIG_DEBUG_MUTEXES=y
		# CONFIG_DEBUG_RT_MUTEXES is not set
		# CONFIG_RT_MUTEX_TESTER is not set
		# CONFIG_DEBUG_SPINLOCK is not set
		CONFIG_DEBUG_MUTEXES=y
		# CONFIG_DEBUG_RWSEMS is not set
		# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
		# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
		# CONFIG_DEBUG_KOBJECT is not set
		# CONFIG_DEBUG_INFO is not set
		CONFIG_DEBUG_FS=y
		@@ -1476,11 +1554,7 @@ CONFIG_FORCED_INLINING=y
		# CONFIG_DEBUGGER is not set
		CONFIG_IRQSTACKS=y
		CONFIG_BOOTX_TEXT=y
		# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
		# CONFIG_PPC_EARLY_DEBUG_G5 is not set
		# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
		# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
		# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
		# CONFIG_PPC_EARLY_DEBUG is not set

		#
		# Security options

arch/powerpc/configs/iseries_defconfig

+64 −14

File changed.

Preview size limit exceeded, changes collapsed.