Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit e51d565f authored by Wolfram Sang's avatar Wolfram Sang Committed by Jean Delvare
Browse files

spi: Move at25 (for SPI eeproms) to /drivers/misc/eeprom 



Signed-off-by: default avatarWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 2e157888

drivers/misc/eeprom/Kconfig

+11 −0
Original line number Diff line number Diff line
@@ -26,6 +26,17 @@ config AT24 
	  This driver can also be built as a module.  If so, the module

	  will be called at24.



config SPI_AT25

	tristate "SPI EEPROMs from most vendors"

	depends on SPI && SYSFS

	help

	  Enable this driver to get read/write support to most SPI EEPROMs,

	  after you configure the board init code to know about each eeprom

	  on your target board.



	  This driver can also be built as a module.  If so, the module

	  will be called at25.



config SENSORS_EEPROM

	tristate "Old I2C EEPROM reader"

	depends on I2C && EXPERIMENTAL

drivers/misc/eeprom/Makefile

+1 −0
Original line number Diff line number Diff line 
obj-$(CONFIG_AT24)		+= at24.o

obj-$(CONFIG_SPI_AT25)		+= at25.o

obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o

drivers/spi/at25.c→drivers/misc/eeprom/at25.c

+0 −0

File moved.

View file

drivers/spi/Kconfig

+0 −11
Original line number Diff line number Diff line
@@ -230,17 +230,6 @@ config SPI_XILINX 
#

comment "SPI Protocol Masters"



config SPI_AT25

	tristate "SPI EEPROMs from most vendors"

	depends on SYSFS

	help

	  Enable this driver to get read/write support to most SPI EEPROMs,

	  after you configure the board init code to know about each eeprom

	  on your target board.



	  This driver can also be built as a module.  If so, the module

	  will be called at25.



config SPI_SPIDEV

	tristate "User mode SPI device driver support"

	depends on EXPERIMENTAL

drivers/spi/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -33,7 +33,6 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o 
# 	... add above this line ...



# SPI protocol drivers (device/link on bus)

obj-$(CONFIG_SPI_AT25)		+= at25.o

obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o

obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o

# 	... add above this line ...