Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit deecca61 authored by Ravishankar Karkala Mallikarjunayya's avatar Ravishankar Karkala Mallikarjunayya Committed by Greg Kroah-Hartman
Browse files

Staging: comedi: fix comment issue fixed for das800.c 



This is a patch to the das800.c file that fixes up a
WARNING: 'Block comments use a trailing */ on a separate line'
found by the checkpatch.pl tool

Signed-off-by: default avatarRavishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 55cc6164

drivers/staging/comedi/drivers/das800.c

+51 −51
Original line number Diff line number Diff line 
/*

    comedi/drivers/das800.c

    Driver for Keitley das800 series boards and compatibles

    Copyright (C) 2000 Frank Mori Hess <fmhess@users.sourceforge.net>



    COMEDI - Linux Control and Measurement Device Interface

    Copyright (C) 2000 David A. Schleef <ds@schleef.org>



    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; either version 2 of the License, or

    (at your option) any later version.



    This program is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    GNU General Public License for more details.

 * comedi/drivers/das800.c

 * Driver for Keitley das800 series boards and compatibles

 * Copyright (C) 2000 Frank Mori Hess <fmhess@users.sourceforge.net>

 *

 * COMEDI - Linux Control and Measurement Device Interface

 * Copyright (C) 2000 David A. Schleef <ds@schleef.org>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

/*

Driver: das800

Description: Keithley Metrabyte DAS800 (& compatibles)

Author: Frank Mori Hess <fmhess@users.sourceforge.net>

Devices: [Keithley Metrabyte] DAS-800 (das-800), DAS-801 (das-801),

  DAS-802 (das-802),

  [Measurement Computing] CIO-DAS800 (cio-das800),

  CIO-DAS801 (cio-das801), CIO-DAS802 (cio-das802),

  CIO-DAS802/16 (cio-das802/16)

Status: works, cio-das802/16 untested - email me if you have tested it



Configuration options:

  [0] - I/O port base address

  [1] - IRQ (optional, required for timed or externally triggered conversions)



Notes:

	IRQ can be omitted, although the cmd interface will not work without it.



	All entries in the channel/gain list must use the same gain and be

	consecutive channels counting upwards in channel number (these are

	hardware limitations.)



	I've never tested the gain setting stuff since I only have a

	DAS-800 board with fixed gain.



	The cio-das802/16 does not have a fifo-empty status bit!  Therefore

	only fifo-half-full transfers are possible with this card.



cmd triggers supported:

	start_src:      TRIG_NOW | TRIG_EXT

	scan_begin_src: TRIG_FOLLOW

	scan_end_src:   TRIG_COUNT

	convert_src:    TRIG_TIMER | TRIG_EXT

	stop_src:       TRIG_NONE | TRIG_COUNT

 * Driver: das800

 * Description: Keithley Metrabyte DAS800 (& compatibles)

 * Author: Frank Mori Hess <fmhess@users.sourceforge.net>

 * Devices: [Keithley Metrabyte] DAS-800 (das-800), DAS-801 (das-801),

 * DAS-802 (das-802),

 * [Measurement Computing] CIO-DAS800 (cio-das800),

 * CIO-DAS801 (cio-das801), CIO-DAS802 (cio-das802),

 * CIO-DAS802/16 (cio-das802/16)

 * Status: works, cio-das802/16 untested - email me if you have tested it

 *

 * Configuration options:

 * [0] - I/O port base address

 * [1] - IRQ (optional, required for timed or externally triggered conversions)

 *

 * Notes:

 *	IRQ can be omitted, although the cmd interface will not work without it.

 *

 *	All entries in the channel/gain list must use the same gain and be

 *	consecutive channels counting upwards in channel number (these are

 *	hardware limitations.)

 *

 *	I've never tested the gain setting stuff since I only have a

 *	DAS-800 board with fixed gain.

 *

 *	The cio-das802/16 does not have a fifo-empty status bit!  Therefore

 *	only fifo-half-full transfers are possible with this card.

 *

 * cmd triggers supported:

 *	start_src:      TRIG_NOW | TRIG_EXT

 *	scan_begin_src: TRIG_FOLLOW

 *	scan_end_src:   TRIG_COUNT

 *	convert_src:    TRIG_TIMER | TRIG_EXT

 *	stop_src:       TRIG_NONE | TRIG_COUNT

 */



#include <linux/module.h>