Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit dd943170 authored by Andrew Lunn's avatar Andrew Lunn Committed by Jason Cooper
Browse files

ARM: Kirkwood: Add DT description of rd88f6192. 



Mechanically translate rd88f6192-nas-setup.c into DT equivelent.

Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 5b26bd88

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-b3.dtb \ 
	kirkwood-nsa310a.dtb \

	kirkwood-openblocks_a6.dtb \

	kirkwood-openblocks_a7.dtb \

	kirkwood-rd88f6192.dtb \

	kirkwood-sheevaplug.dtb \

	kirkwood-sheevaplug-esata.dtb \

	kirkwood-topkick.dtb \

arch/arm/boot/dts/kirkwood-rd88f6192.dts

0 → 100644
+112 −0
Original line number Diff line number Diff line 
/*

 * Marvell RD88F6192 Board descrition

 *

 * Andrew Lunn <andrew@lunn.ch>

 *

 * This file is licensed under the terms of the GNU General Public

 * License version 2.  This program is licensed "as is" without any

 * warranty of any kind, whether express or implied.

 *

 * This file contains the definitions that are common between the three

 * variants of the Marvell Kirkwood Development Board.

 */

/dts-v1/;



#include "kirkwood.dtsi"

#include "kirkwood-6192.dtsi"



/ {

	model = "Marvell RD88F6192 reference design";

	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";



	memory {

		device_type = "memory";

		reg = <0x00000000 0x20000000>;

	};



	chosen {

		bootargs = "console=ttyS0,115200n8";

	};



	mbus {

		pcie-controller {

			status = "okay";



			pcie@1,0 {

				status = "okay";

			};

		};

	};



	ocp@f1000000 {

		pinctrl: pinctrl@10000 {

			pinctrl-0 = <&pmx_usb_power>;

			pinctrl-names = "default";



                        pmx_usb_power: pmx-usb-power {

                                marvell,pins = "mpp10";

                                marvell,function = "gpo";

                        };

		};



		serial@12000 {

			status = "okay";



		};



		spi@10600 {

			status = "okay";

			pinctrl-0 = <&pmx_spi>;

			pinctrl-names = "default";



			m25p128@0 {

				#address-cells = <1>;

				#size-cells = <1>;

				compatible = "st,m25p128";

				reg = <0>;

				spi-max-frequency = <20000000>;

				mode = <0>;

			};

		};



		sata@80000 {

			status = "okay";

			nr-ports = <2>;

		};

	};



	regulators {

                compatible = "simple-bus";

                #address-cells = <1>;

                #size-cells = <0>;

                pinctrl-0 = <&pmx_usb_power>;

                pinctrl-names = "default";



                usb_power: regulator@0 {

                        compatible = "regulator-fixed";

                        reg = <0>;

                        regulator-name = "USB VBUS";

                        regulator-min-microvolt = <5000000>;

                        regulator-max-microvolt = <5000000>;

                        enable-active-high;

                        regulator-always-on;

                        regulator-boot-on;

                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;

                };

	};

};



&mdio {

        status = "okay";



        ethphy0: ethernet-phy@8 {

                reg = <8>;

        };

};



&eth0 {

        status = "okay";

        ethernet0-port@0 {

                phy-handle = <&ethphy0>;

        };

};
 
 No newline at end of file