Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit db53f28b authored by Russell King's avatar Russell King Committed by Russell King
Browse files

[MMC] Add multi block-write capability 



Add a capability flag for drivers to set when they can perform multi-
block transfers to cards _and_ correctly report the number of bytes
transferred should an error occur.

The last point is very important - if a driver reports more bytes than
were actually accepted by the card and an error occurs, there is the
possibility for data loss.

Pierre Ossman provided the patch for wbsd and sdhci.

Signed-off-by: default avatarPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 132919ba

drivers/mmc/mmc_block.c

+20 −7
Original line number Diff line number Diff line
@@ -32,6 +32,7 @@ 
#include <linux/mmc/card.h>

#include <linux/mmc/host.h>

#include <linux/mmc/protocol.h>

#include <linux/mmc/host.h>



#include <asm/system.h>

#include <asm/uaccess.h>
@@ -165,6 +166,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) 
	do {

		struct mmc_blk_request brq;

		struct mmc_command cmd;

		u32 readcmd, writecmd;



		memset(&brq, 0, sizeof(struct mmc_blk_request));

		brq.mrq.cmd = &brq.cmd;
@@ -180,20 +182,31 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) 


		mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);



		if (rq_data_dir(req) == READ) {

			brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;

			brq.data.flags |= MMC_DATA_READ;

		} else {

			brq.cmd.opcode = MMC_WRITE_BLOCK;

			brq.data.flags |= MMC_DATA_WRITE;

		/*

		 * If the host doesn't support multiple block writes, force

		 * block writes to single block.

		 */

		if (rq_data_dir(req) != READ &&

		    !(card->host->caps & MMC_CAP_MULTIWRITE))

			brq.data.blocks = 1;

		}



		if (brq.data.blocks > 1) {

			brq.data.flags |= MMC_DATA_MULTI;

			brq.mrq.stop = &brq.stop;

			readcmd = MMC_READ_MULTIPLE_BLOCK;

			writecmd = MMC_WRITE_MULTIPLE_BLOCK;

		} else {

			brq.mrq.stop = NULL;

			readcmd = MMC_READ_SINGLE_BLOCK;

			writecmd = MMC_WRITE_BLOCK;

		}



		if (rq_data_dir(req) == READ) {

			brq.cmd.opcode = readcmd;

			brq.data.flags |= MMC_DATA_READ;

		} else {

			brq.cmd.opcode = writecmd;

			brq.data.flags |= MMC_DATA_WRITE;

		}



		brq.data.sg = mq->sg;

drivers/mmc/mmci.c

+1 −0
Original line number Diff line number Diff line
@@ -509,6 +509,7 @@ static int mmci_probe(struct amba_device *dev, void *id) 
	mmc->f_min = (host->mclk + 511) / 512;

	mmc->f_max = min(host->mclk, fmax);

	mmc->ocr_avail = plat->ocr_mask;

	mmc->caps = MMC_CAP_MULTIWRITE;



	/*

	 * We can do SGIO

drivers/mmc/sdhci.c

+1 −1
Original line number Diff line number Diff line
@@ -1262,7 +1262,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) 
	mmc->ops = &sdhci_ops;

	mmc->f_min = host->max_clk / 256;

	mmc->f_max = host->max_clk;

	mmc->caps = MMC_CAP_4_BIT_DATA;

	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;



	mmc->ocr_avail = 0;

	if (caps & SDHCI_CAN_VDD_330)

drivers/mmc/wbsd.c

+1 −1
Original line number Diff line number Diff line
@@ -1323,7 +1323,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev) 
	mmc->f_min = 375000;

	mmc->f_max = 24000000;

	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;

	mmc->caps = MMC_CAP_4_BIT_DATA;

	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;



	spin_lock_init(&host->lock);

include/linux/mmc/host.h

+1 −0
Original line number Diff line number Diff line
@@ -85,6 +85,7 @@ struct mmc_host { 
	unsigned long		caps;		/* Host capabilities */



#define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */

#define MMC_CAP_MULTIWRITE	(1 << 1)	/* Can accurately report bytes sent to card on error */



	/* host specific block data */

	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */