Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c9fc891f authored by Dhananjay Phadke's avatar Dhananjay Phadke Committed by Jeff Garzik
Browse files

netxen: mtu, mac, link status changes 



MAC addr, multicast filters, mtu are set through firmware commands
in firmware v4.0.0+ because of virtualization of physical ports.
Link status is also read from registers allocated by firmware for
each virtual port.

Signed-off-by: default avatarDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 48bfd1e0

drivers/net/netxen/netxen_nic.h

+7 −5
Original line number Diff line number Diff line
@@ -1119,7 +1119,7 @@ typedef struct { 
	u64 qhdr;

	u64 req_hdr;

	u64 words[6];

} nic_request_t;

} nx_nic_req_t;



typedef struct {

	u8 op;
@@ -1127,6 +1127,7 @@ typedef struct { 
	u8 mac_addr[6];

} nx_mac_req_t;



#define MAX_PENDING_DESC_BLOCK_SIZE	64



#define NETXEN_NIC_MSI_ENABLED		0x02

#define NETXEN_NIC_MSIX_ENABLED		0x04
@@ -1152,7 +1153,6 @@ struct netxen_adapter { 
	int pci_using_dac;

	struct napi_struct napi;

	struct net_device_stats net_stats;

	unsigned char mac_addr[ETH_ALEN];

	int mtu;

	int portnum;

	u8 physical_port;
@@ -1160,6 +1160,7 @@ struct netxen_adapter { 


	uint8_t		mc_enabled;

	uint8_t		max_mc_count;

	nx_mac_list_t	*mac_list;



	struct netxen_legacy_intr_set legacy_intr;

	u32	crb_intr_mask;
@@ -1231,7 +1232,6 @@ struct netxen_adapter { 
	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);

	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);

	int (*init_port) (struct netxen_adapter *, int);

	void (*init_niu) (struct netxen_adapter *);

	int (*stop_port) (struct netxen_adapter *);



	int (*hw_read_wx)(struct netxen_adapter *, ulong, void *, int);
@@ -1316,7 +1316,6 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, 
/* Functions available from netxen_nic_hw.c */

int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu);

int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu);

void netxen_nic_init_niu_gb(struct netxen_adapter *adapter);

void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val);

int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off);

void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value);
@@ -1404,7 +1403,8 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, 
			    u32 ringid);

int netxen_process_cmd_ring(struct netxen_adapter *adapter);

u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);

void netxen_nic_set_multi(struct net_device *netdev);

void netxen_p2_nic_set_multi(struct net_device *netdev);

void netxen_p3_nic_set_multi(struct net_device *netdev);



u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);

int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
@@ -1412,6 +1412,8 @@ int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu); 
int netxen_nic_set_mac(struct net_device *netdev, void *p);

struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);



void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,

		uint32_t crb_producer);



/*

 * NetXen Board information

drivers/net/netxen/netxen_nic_hdr.h

+6 −0
Original line number Diff line number Diff line
@@ -718,6 +718,12 @@ enum { 
#define XG_LINK_UP	0x10

#define XG_LINK_DOWN	0x20



#define XG_LINK_UP_P3	0x01

#define XG_LINK_DOWN_P3	0x02

#define XG_LINK_STATE_P3_MASK 0xf

#define XG_LINK_STATE_P3(pcifn,val) \

	(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)



#define NETXEN_CAM_RAM_BASE	(NETXEN_CRB_CAM + 0x02000)

#define NETXEN_CAM_RAM(reg)	(NETXEN_CAM_RAM_BASE + (reg))

#define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150))

drivers/net/netxen/netxen_nic_hw.c

+183 −15
Original line number Diff line number Diff line
@@ -314,6 +314,8 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p) 


	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);



	/* For P3, MAC addr is not set in NIU */

	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))

		if (adapter->macaddr_set)

			adapter->macaddr_set(adapter, addr->sa_data);
@@ -405,10 +407,7 @@ netxen_nic_set_mcast_addr(struct netxen_adapter *adapter, 
	return 0;

}



/*

 * netxen_nic_set_multi - Multicast

 */

void netxen_nic_set_multi(struct net_device *netdev)

void netxen_p2_nic_set_multi(struct net_device *netdev)

{

	struct netxen_adapter *adapter = netdev_priv(netdev);

	struct dev_mc_list *mc_ptr;
@@ -456,18 +455,186 @@ void netxen_nic_set_multi(struct net_device *netdev) 
		netxen_nic_set_mcast_addr(adapter, index, null_addr);

}



static int nx_p3_nic_add_mac(struct netxen_adapter *adapter,

		u8 *addr, nx_mac_list_t **add_list, nx_mac_list_t **del_list)

{

	nx_mac_list_t *cur, *prev;



	/* if in del_list, move it to adapter->mac_list */

	for (cur = *del_list, prev = NULL; cur;) {

		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {

			if (prev == NULL)

				*del_list = cur->next;

			else

				prev->next = cur->next;

			cur->next = adapter->mac_list;

			adapter->mac_list = cur;

			return 0;

		}

		prev = cur;

		cur = cur->next;

	}



	/* make sure to add each mac address only once */

	for (cur = adapter->mac_list; cur; cur = cur->next) {

		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)

			return 0;

	}

	/* not in del_list, create new entry and add to add_list */

	cur = kmalloc(sizeof(*cur), in_atomic()? GFP_ATOMIC : GFP_KERNEL);

	if (cur == NULL) {

		printk(KERN_ERR "%s: cannot allocate memory. MAC filtering may"

				"not work properly from now.\n", __func__);

		return -1;

	}



	memcpy(cur->mac_addr, addr, ETH_ALEN);

	cur->next = *add_list;

	*add_list = cur;

	return 0;

}



static int

netxen_send_cmd_descs(struct netxen_adapter *adapter,

		struct cmd_desc_type0 *cmd_desc_arr, int nr_elements)

{

	uint32_t i, producer;

	struct netxen_cmd_buffer *pbuf;

	struct cmd_desc_type0 *cmd_desc;



	if (nr_elements > MAX_PENDING_DESC_BLOCK_SIZE || nr_elements == 0) {

		printk(KERN_WARNING "%s: Too many command descriptors in a "

			      "request\n", __func__);

		return -EINVAL;

	}



	i = 0;



	producer = adapter->cmd_producer;

	do {

		cmd_desc = &cmd_desc_arr[i];



		pbuf = &adapter->cmd_buf_arr[producer];

		pbuf->mss = 0;

		pbuf->total_length = 0;

		pbuf->skb = NULL;

		pbuf->cmd = 0;

		pbuf->frag_count = 0;

		pbuf->port = 0;



		/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */

		memcpy(&adapter->ahw.cmd_desc_head[producer],

			&cmd_desc_arr[i], sizeof(struct cmd_desc_type0));



		producer = get_next_index(producer,

				adapter->max_tx_desc_count);

		i++;



	} while (i != nr_elements);



	adapter->cmd_producer = producer;



	/* write producer index to start the xmit */



	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);



	return 0;

}



#define NIC_REQUEST		0x14

#define NETXEN_MAC_EVENT	0x1



static int nx_p3_sre_macaddr_change(struct net_device *dev,

		u8 *addr, unsigned op)

{

	struct netxen_adapter *adapter = (struct netxen_adapter *)dev->priv;

	nx_nic_req_t req;

	nx_mac_req_t mac_req;

	int rv;



	memset(&req, 0, sizeof(nx_nic_req_t));

	req.qhdr |= (NIC_REQUEST << 23);

	req.req_hdr |= NETXEN_MAC_EVENT;

	req.req_hdr |= ((u64)adapter->portnum << 16);

	mac_req.op = op;

	memcpy(&mac_req.mac_addr, addr, 6);

	req.words[0] = cpu_to_le64(*(u64 *)&mac_req);



	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);

	if (rv != 0) {

		printk(KERN_ERR "ERROR. Could not send mac update\n");

		return rv;

	}



	return 0;

}



void netxen_p3_nic_set_multi(struct net_device *netdev)

{

	struct netxen_adapter *adapter = netdev_priv(netdev);

	nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;

	struct dev_mc_list *mc_ptr;

	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };



	adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE);



	/*

	 * Programming mac addresses will automaticly enabling L2 filtering.

	 * HW will replace timestamp with L2 conid when L2 filtering is

	 * enabled. This causes problem for LSA. Do not enabling L2 filtering

	 * until that problem is fixed.

	 */

	if ((netdev->flags & IFF_PROMISC) ||

			(netdev->mc_count > adapter->max_mc_count))

		return;



	del_list = adapter->mac_list;

	adapter->mac_list = NULL;



	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);

	if (netdev->mc_count > 0) {

		nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);

		for (mc_ptr = netdev->mc_list; mc_ptr;

		     mc_ptr = mc_ptr->next) {

			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,

					  &add_list, &del_list);

		}

	}

	for (cur = del_list; cur;) {

		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);

		next = cur->next;

		kfree(cur);

		cur = next;

	}

	for (cur = add_list; cur;) {

		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_ADD);

		next = cur->next;

		cur->next = adapter->mac_list;

		adapter->mac_list = cur;

		cur = next;

	}

}



/*

 * netxen_nic_change_mtu - Change the Maximum Transfer Unit

 * @returns 0 on success, negative on failure

 */



#define MTU_FUDGE_FACTOR	100



int netxen_nic_change_mtu(struct net_device *netdev, int mtu)

{

	struct netxen_adapter *adapter = netdev_priv(netdev);

	int eff_mtu = mtu + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE;

	int max_mtu;



	if ((eff_mtu > NETXEN_MAX_MTU) || (eff_mtu < NETXEN_MIN_MTU)) {

		printk(KERN_ERR "%s: %s %d is not supported.\n",

		       netxen_nic_driver_name, netdev->name, mtu);

	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))

		max_mtu = P3_MAX_MTU;

	else

		max_mtu = P2_MAX_MTU;



	if (mtu > max_mtu) {

		printk(KERN_ERR "%s: mtu > %d bytes unsupported\n",

				netdev->name, max_mtu);

		return -EINVAL;

	}
@@ -475,6 +642,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu) 
		adapter->set_mtu(adapter, mtu);

	netdev->mtu = mtu;



	mtu += MTU_FUDGE_FACTOR;

	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))

		nx_fw_cmd_set_mtu(adapter, mtu);

	else if (adapter->set_mtu)

		adapter->set_mtu(adapter, mtu);



	return 0;

}
@@ -1882,11 +2055,6 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) 
	return 0;

}



void netxen_nic_init_niu_gb(struct netxen_adapter *adapter)

{

	netxen_niu_gbe_init_port(adapter, adapter->physical_port);

}



void

netxen_crb_writelit_adapter(struct netxen_adapter *adapter,

		unsigned long off, int data)

drivers/net/netxen/netxen_nic_init.c

+1 −1
Original line number Diff line number Diff line
@@ -329,7 +329,7 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) 
		adapter->set_promisc = netxen_niu_set_promiscuous_mode;

		adapter->phy_read = netxen_niu_gbe_phy_read;

		adapter->phy_write = netxen_niu_gbe_phy_write;

		adapter->init_niu = netxen_nic_init_niu_gb;

		adapter->init_port = netxen_niu_gbe_init_port;

		adapter->stop_port = netxen_niu_disable_gbe_port;

		break;

drivers/net/netxen/netxen_nic_main.c

+25 −10
Original line number Diff line number Diff line
@@ -123,7 +123,7 @@ static uint32_t crb_cmd_producer[4] = { 
	CRB_CMD_PRODUCER_OFFSET_2, CRB_CMD_PRODUCER_OFFSET_3

};



static inline void

void

netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,

		uint32_t crb_producer)

{
@@ -716,7 +716,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 
	netdev->stop		   = netxen_nic_close;

	netdev->hard_start_xmit    = netxen_nic_xmit_frame;

	netdev->get_stats	   = netxen_nic_get_stats;

	netdev->set_multicast_list = netxen_nic_set_multi;

	if (NX_IS_REVISION_P3(revision_id))

		netdev->set_multicast_list = netxen_p3_nic_set_multi;

	else

		netdev->set_multicast_list = netxen_p2_nic_set_multi;

	netdev->set_mac_address    = netxen_nic_set_mac;

	netdev->change_mtu	   = netxen_nic_change_mtu;

	netdev->tx_timeout	   = netxen_tx_timeout;
@@ -1100,7 +1103,7 @@ static int netxen_nic_open(struct net_device *netdev) 


	/* Done here again so that even if phantom sw overwrote it,

	 * we set it */

	err = adapter->init_port(adapter, adapter->portnum);

	err = adapter->init_port(adapter, adapter->physical_port);

	if (err) {

		printk(KERN_ERR "%s: Failed to initialize port %d\n",

				netxen_nic_driver_name, adapter->portnum);
@@ -1110,7 +1113,10 @@ static int netxen_nic_open(struct net_device *netdev) 


	netxen_nic_set_link_parameters(adapter);



	netxen_nic_set_multi(netdev);

	netdev->set_multicast_list(netdev);

	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))

		nx_fw_cmd_set_mtu(adapter, netdev->mtu);

	else

		adapter->set_mtu(adapter, netdev->mtu);



	mod_timer(&adapter->watchdog_timer, jiffies);
@@ -1379,12 +1385,21 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter) 


	port = adapter->physical_port;



	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {

		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);

	if (adapter->ahw.board_type == NETXEN_NIC_GBE)

		linkup = (val >> port) & 1;

	else {

	} else {

		if (adapter->fw_major < 4) {

			val = adapter->pci_read_normalize(adapter,

					CRB_XG_STATE);

			val = (val >> port*8) & 0xff;

			linkup = (val == XG_LINK_UP);

		} else {

			val = adapter->pci_read_normalize(adapter,

				CRB_XG_STATE_P3);

			val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);

			linkup = (val == XG_LINK_UP_P3);

		}

	}



	if (adapter->ahw.linkup && !linkup) {