Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c155c749 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Pull more input updates from Dmitry Torokhov:
 "Second round of updates for the input subsystem.

  The BYD PS/2 protocol driver now uses absolute reporting mode and
  should behave more like other touchpads; Synaptics driver needed to
  extend one of its quirks to a newer firmware version, and a few USB
  drivers got tightened up checks for the contents of their descriptors"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sur40 - fix DMA on stack
  Input: ati_remote2 - fix crashes on detecting device with invalid descriptor
  Input: synaptics - handle spurious release of trackstick buttons, again
  Input: synaptics-rmi4 - remove check of Non-NULL array
  Input: byd - enable absolute mode
  Input: ims-pcu - sanity check against missing interfaces
  Input: melfas_mip4 - add hw_version sysfs attribute
parents 1701f680 d314e9e8
Loading
Loading
Loading
Loading
+30 −6
Original line number Diff line number Diff line
@@ -817,26 +817,49 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d

	ar2->udev = udev;

	/* Sanity check, first interface must have an endpoint */
	if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
		dev_err(&interface->dev,
			"%s(): interface 0 must have an endpoint\n", __func__);
		r = -ENODEV;
		goto fail1;
	}
	ar2->intf[0] = interface;
	ar2->ep[0] = &alt->endpoint[0].desc;

	/* Sanity check, the device must have two interfaces */
	ar2->intf[1] = usb_ifnum_to_if(udev, 1);
	if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) {
		dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n",
			__func__, udev->actconfig->desc.bNumInterfaces);
		r = -ENODEV;
		goto fail1;
	}

	r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
	if (r)
		goto fail1;

	/* Sanity check, second interface must have an endpoint */
	alt = ar2->intf[1]->cur_altsetting;
	if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
		dev_err(&interface->dev,
			"%s(): interface 1 must have an endpoint\n", __func__);
		r = -ENODEV;
		goto fail2;
	}
	ar2->ep[1] = &alt->endpoint[0].desc;

	r = ati_remote2_urb_init(ar2);
	if (r)
		goto fail2;
		goto fail3;

	ar2->channel_mask = channel_mask;
	ar2->mode_mask = mode_mask;

	r = ati_remote2_setup(ar2, ar2->channel_mask);
	if (r)
		goto fail2;
		goto fail3;

	usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
	strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
@@ -845,11 +868,11 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d

	r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
	if (r)
		goto fail2;
		goto fail3;

	r = ati_remote2_input_init(ar2);
	if (r)
		goto fail3;
		goto fail4;

	usb_set_intfdata(interface, ar2);

@@ -857,10 +880,11 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d

	return 0;

 fail3:
 fail4:
	sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
 fail2:
 fail3:
	ati_remote2_urb_cleanup(ar2);
 fail2:
	usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
 fail1:
	kfree(ar2);
+4 −0
Original line number Diff line number Diff line
@@ -1663,6 +1663,8 @@ static int ims_pcu_parse_cdc_data(struct usb_interface *intf, struct ims_pcu *pc

	pcu->ctrl_intf = usb_ifnum_to_if(pcu->udev,
					 union_desc->bMasterInterface0);
	if (!pcu->ctrl_intf)
		return -EINVAL;

	alt = pcu->ctrl_intf->cur_altsetting;
	pcu->ep_ctrl = &alt->endpoint[0].desc;
@@ -1670,6 +1672,8 @@ static int ims_pcu_parse_cdc_data(struct usb_interface *intf, struct ims_pcu *pc

	pcu->data_intf = usb_ifnum_to_if(pcu->udev,
					 union_desc->bSlaveInterface0);
	if (!pcu->data_intf)
		return -EINVAL;

	alt = pcu->data_intf->cur_altsetting;
	if (alt->desc.bNumEndpoints != 2) {
+368 −197
Original line number Diff line number Diff line
@@ -12,10 +12,12 @@
#include <linux/input.h>
#include <linux/libps2.h>
#include <linux/serio.h>
#include <linux/slab.h>

#include "psmouse.h"
#include "byd.h"

/* PS2 Bits */
#define PS2_Y_OVERFLOW	BIT_MASK(7)
#define PS2_X_OVERFLOW	BIT_MASK(6)
#define PS2_Y_SIGN	BIT_MASK(5)
@@ -26,69 +28,249 @@
#define PS2_LEFT	BIT_MASK(0)

/*
 * The touchpad reports gestures in the last byte of each packet. It can take
 * any of the following values:
 * BYD pad constants
 */

/* One-finger scrolling in one of the edge scroll zones. */
#define BYD_SCROLLUP		0xCA
#define BYD_SCROLLDOWN		0x36
#define BYD_SCROLLLEFT		0xCB
#define BYD_SCROLLRIGHT		0x35
/* Two-finger scrolling. */
#define BYD_2DOWN		0x2B
#define BYD_2UP			0xD5
#define BYD_2LEFT		0xD6
#define BYD_2RIGHT		0x2A
/* Pinching in or out. */
#define BYD_ZOOMOUT		0xD8
#define BYD_ZOOMIN		0x28
/* Three-finger swipe. */
#define BYD_3UP			0xD3
#define BYD_3DOWN		0x2D
#define BYD_3LEFT		0xD4
#define BYD_3RIGHT		0x2C
/* Four-finger swipe. */
#define BYD_4UP			0xCD
#define BYD_4DOWN		0x33
/*
 * True device resolution is unknown, however experiments show the
 * resolution is about 111 units/mm.
 * Absolute coordinate packets are in the range 0-255 for both X and Y
 * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in
 * the right ballpark given the touchpad's physical dimensions and estimate
 * resolution per spec sheet, device active area dimensions are
 * 101.6 x 60.1 mm.
 */
#define BYD_PAD_WIDTH		11264
#define BYD_PAD_HEIGHT		6656
#define BYD_PAD_RESOLUTION	111

int byd_detect(struct psmouse *psmouse, bool set_properties)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	unsigned char param[4];
/*
 * Given the above dimensions, relative packets velocity is in multiples of
 * 1 unit / 11 milliseconds.  We use this dt to estimate distance traveled
 */
#define BYD_DT			11
/* Time in jiffies used to timeout various touch events (64 ms) */
#define BYD_TOUCH_TIMEOUT	msecs_to_jiffies(64)

	param[0] = 0x03;
	param[1] = 0x00;
	param[2] = 0x00;
	param[3] = 0x00;
/* BYD commands reverse engineered from windows driver */

	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
		return -1;
/*
 * Swipe gesture from off-pad to on-pad
 *  0 : disable
 *  1 : enable
 */
#define BYD_CMD_SET_OFFSCREEN_SWIPE		0x10cc
/*
 * Tap and drag delay time
 *  0 : disable
 *  1 - 8 : least to most delay
 */
#define BYD_CMD_SET_TAP_DRAG_DELAY_TIME		0x10cf
/*
 * Physical buttons function mapping
 *  0 : enable
 *  4 : normal
 *  5 : left button custom command
 *  6 : right button custom command
 *  8 : disable
 */
#define BYD_CMD_SET_PHYSICAL_BUTTONS		0x10d0
/*
 * Absolute mode (1 byte X/Y resolution)
 *  0 : disable
 *  2 : enable
 */
#define BYD_CMD_SET_ABSOLUTE_MODE		0x10d1
/*
 * Two finger scrolling
 *  1 : vertical
 *  2 : horizontal
 *  3 : vertical + horizontal
 *  4 : disable
 */
#define BYD_CMD_SET_TWO_FINGER_SCROLL		0x10d2
/*
 * Handedness
 *  1 : right handed
 *  2 : left handed
 */
#define BYD_CMD_SET_HANDEDNESS			0x10d3
/*
 * Tap to click
 *  1 : enable
 *  2 : disable
 */
#define BYD_CMD_SET_TAP				0x10d4
/*
 * Tap and drag
 *  1 : tap and hold to drag
 *  2 : tap and hold to drag + lock
 *  3 : disable
 */
#define BYD_CMD_SET_TAP_DRAG			0x10d5
/*
 * Touch sensitivity
 *  1 - 7 : least to most sensitive
 */
#define BYD_CMD_SET_TOUCH_SENSITIVITY		0x10d6
/*
 * One finger scrolling
 *  1 : vertical
 *  2 : horizontal
 *  3 : vertical + horizontal
 *  4 : disable
 */
#define BYD_CMD_SET_ONE_FINGER_SCROLL		0x10d7
/*
 * One finger scrolling function
 *  1 : free scrolling
 *  2 : edge motion
 *  3 : free scrolling + edge motion
 *  4 : disable
 */
#define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC	0x10d8
/*
 * Sliding speed
 *  1 - 5 : slowest to fastest
 */
#define BYD_CMD_SET_SLIDING_SPEED		0x10da
/*
 * Edge motion
 *  1 : disable
 *  2 : enable when dragging
 *  3 : enable when dragging and pointing
 */
#define BYD_CMD_SET_EDGE_MOTION			0x10db
/*
 * Left edge region size
 *  0 - 7 : smallest to largest width
 */
#define BYD_CMD_SET_LEFT_EDGE_REGION		0x10dc
/*
 * Top edge region size
 *  0 - 9 : smallest to largest height
 */
#define BYD_CMD_SET_TOP_EDGE_REGION		0x10dd
/*
 * Disregard palm press as clicks
 *  1 - 6 : smallest to largest
 */
#define BYD_CMD_SET_PALM_CHECK			0x10de
/*
 * Right edge region size
 *  0 - 7 : smallest to largest width
 */
#define BYD_CMD_SET_RIGHT_EDGE_REGION		0x10df
/*
 * Bottom edge region size
 *  0 - 9 : smallest to largest height
 */
#define BYD_CMD_SET_BOTTOM_EDGE_REGION		0x10e1
/*
 * Multitouch gestures
 *  1 : enable
 *  2 : disable
 */
#define BYD_CMD_SET_MULTITOUCH			0x10e3
/*
 * Edge motion speed
 *  0 : control with finger pressure
 *  1 - 9 : slowest to fastest
 */
#define BYD_CMD_SET_EDGE_MOTION_SPEED		0x10e4
/*
 * Two finger scolling function
 *  0 : free scrolling
 *  1 : free scrolling (with momentum)
 *  2 : edge motion
 *  3 : free scrolling (with momentum) + edge motion
 *  4 : disable
 */
#define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC	0x10e5

	if (param[1] != 0x03 || param[2] != 0x64)
		return -ENODEV;
/*
 * The touchpad generates a mixture of absolute and relative packets, indicated
 * by the the last byte of each packet being set to one of the following:
 */
#define BYD_PACKET_ABSOLUTE			0xf8
#define BYD_PACKET_RELATIVE			0x00
/* Multitouch gesture packets */
#define BYD_PACKET_PINCH_IN			0xd8
#define BYD_PACKET_PINCH_OUT			0x28
#define BYD_PACKET_ROTATE_CLOCKWISE		0x29
#define BYD_PACKET_ROTATE_ANTICLOCKWISE		0xd7
#define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT	0x2a
#define BYD_PACKET_TWO_FINGER_SCROLL_DOWN	0x2b
#define BYD_PACKET_TWO_FINGER_SCROLL_UP		0xd5
#define BYD_PACKET_TWO_FINGER_SCROLL_LEFT	0xd6
#define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT	0x2c
#define BYD_PACKET_THREE_FINGER_SWIPE_DOWN	0x2d
#define BYD_PACKET_THREE_FINGER_SWIPE_UP	0xd3
#define BYD_PACKET_THREE_FINGER_SWIPE_LEFT	0xd4
#define BYD_PACKET_FOUR_FINGER_DOWN		0x33
#define BYD_PACKET_FOUR_FINGER_UP		0xcd
#define BYD_PACKET_REGION_SCROLL_RIGHT		0x35
#define BYD_PACKET_REGION_SCROLL_DOWN		0x36
#define BYD_PACKET_REGION_SCROLL_UP		0xca
#define BYD_PACKET_REGION_SCROLL_LEFT		0xcb
#define BYD_PACKET_RIGHT_CORNER_CLICK		0xd2
#define BYD_PACKET_LEFT_CORNER_CLICK		0x2e
#define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK	0x2f
#define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT		0x37
#define BYD_PACKET_ONTO_PAD_SWIPE_DOWN		0x30
#define BYD_PACKET_ONTO_PAD_SWIPE_UP		0xd0
#define BYD_PACKET_ONTO_PAD_SWIPE_LEFT		0xc9

struct byd_data {
	struct timer_list timer;
	s32 abs_x;
	s32 abs_y;
	typeof(jiffies) last_touch_time;
	bool btn_left;
	bool btn_right;
	bool touch;
};

	psmouse_dbg(psmouse, "BYD touchpad detected\n");
static void byd_report_input(struct psmouse *psmouse)
{
	struct byd_data *priv = psmouse->private;
	struct input_dev *dev = psmouse->dev;

	if (set_properties) {
		psmouse->vendor = "BYD";
		psmouse->name = "TouchPad";
	input_report_key(dev, BTN_TOUCH, priv->touch);
	input_report_key(dev, BTN_TOOL_FINGER, priv->touch);

	input_report_abs(dev, ABS_X, priv->abs_x);
	input_report_abs(dev, ABS_Y, priv->abs_y);
	input_report_key(dev, BTN_LEFT, priv->btn_left);
	input_report_key(dev, BTN_RIGHT, priv->btn_right);

	input_sync(dev);
}

	return 0;
static void byd_clear_touch(unsigned long data)
{
	struct psmouse *psmouse = (struct psmouse *)data;
	struct byd_data *priv = psmouse->private;

	serio_pause_rx(psmouse->ps2dev.serio);
	priv->touch = false;

	byd_report_input(psmouse);

	serio_continue_rx(psmouse->ps2dev.serio);

	/*
	 * Move cursor back to center of pad when we lose touch - this
	 * specifically improves user experience when moving cursor with one
	 * finger, and pressing a button with another.
	 */
	priv->abs_x = BYD_PAD_WIDTH / 2;
	priv->abs_y = BYD_PAD_HEIGHT / 2;
}

static psmouse_ret_t byd_process_byte(struct psmouse *psmouse)
{
	struct input_dev *dev = psmouse->dev;
	struct byd_data *priv = psmouse->private;
	u8 *pkt = psmouse->packet;

	if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) {
@@ -102,53 +284,34 @@ static psmouse_ret_t byd_process_byte(struct psmouse *psmouse)

	/* Otherwise, a full packet has been received */
	switch (pkt[3]) {
	case 0: {
	case BYD_PACKET_ABSOLUTE:
		/* Only use absolute packets for the start of movement. */
		if (!priv->touch) {
			/* needed to detect tap */
			typeof(jiffies) tap_time =
				priv->last_touch_time + BYD_TOUCH_TIMEOUT;
			priv->touch = time_after(jiffies, tap_time);

			/* init abs position */
			priv->abs_x = pkt[1] * (BYD_PAD_WIDTH / 256);
			priv->abs_y = (255 - pkt[2]) * (BYD_PAD_HEIGHT / 256);
		}
		break;
	case BYD_PACKET_RELATIVE: {
		/* Standard packet */
		/* Sign-extend if a sign bit is set. */
		unsigned int signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0;
		unsigned int signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0;
		int dx = signx | (int) pkt[1];
		int dy = signy | (int) pkt[2];
		u32 signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0;
		u32 signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0;
		s32 dx = signx | (int) pkt[1];
		s32 dy = signy | (int) pkt[2];

		input_report_rel(psmouse->dev, REL_X, dx);
		input_report_rel(psmouse->dev, REL_Y, -dy);
		/* Update position based on velocity */
		priv->abs_x += dx * BYD_DT;
		priv->abs_y -= dy * BYD_DT;

		input_report_key(psmouse->dev, BTN_LEFT, pkt[0] & PS2_LEFT);
		input_report_key(psmouse->dev, BTN_RIGHT, pkt[0] & PS2_RIGHT);
		input_report_key(psmouse->dev, BTN_MIDDLE, pkt[0] & PS2_MIDDLE);
		priv->touch = true;
		break;
	}

	case BYD_SCROLLDOWN:
	case BYD_2DOWN:
		input_report_rel(dev, REL_WHEEL, -1);
		break;

	case BYD_SCROLLUP:
	case BYD_2UP:
		input_report_rel(dev, REL_WHEEL, 1);
		break;

	case BYD_SCROLLLEFT:
	case BYD_2LEFT:
		input_report_rel(dev, REL_HWHEEL, -1);
		break;

	case BYD_SCROLLRIGHT:
	case BYD_2RIGHT:
		input_report_rel(dev, REL_HWHEEL, 1);
		break;

	case BYD_ZOOMOUT:
	case BYD_ZOOMIN:
	case BYD_3UP:
	case BYD_3DOWN:
	case BYD_3LEFT:
	case BYD_3RIGHT:
	case BYD_4UP:
	case BYD_4DOWN:
		break;

	default:
		psmouse_warn(psmouse,
			     "Unrecognized Z: pkt = %02x %02x %02x %02x\n",
@@ -157,134 +320,76 @@ static psmouse_ret_t byd_process_byte(struct psmouse *psmouse)
		return PSMOUSE_BAD_DATA;
	}

	input_sync(dev);

	return PSMOUSE_FULL_PACKET;
}
	priv->btn_left = pkt[0] & PS2_LEFT;
	priv->btn_right = pkt[0] & PS2_RIGHT;

/* Send a sequence of bytes, where each is ACKed before the next is sent. */
static int byd_send_sequence(struct psmouse *psmouse, const u8 *seq, size_t len)
{
	unsigned int i;
	byd_report_input(psmouse);

	for (i = 0; i < len; ++i) {
		if (ps2_command(&psmouse->ps2dev, NULL, seq[i]))
			return -1;
	/* Reset time since last touch. */
	if (priv->touch) {
		priv->last_touch_time = jiffies;
		mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT);
	}
	return 0;
}

/* Keep scrolling after fingers are removed. */
#define SCROLL_INERTIAL		0x01
#define SCROLL_NO_INERTIAL	0x02

/* Clicking can be done by tapping or pressing. */
#define CLICK_BOTH		0x01
/* Clicking can only be done by pressing. */
#define CLICK_PRESS_ONLY	0x02

static int byd_enable(struct psmouse *psmouse)
{
	const u8 seq1[] = { 0xE2, 0x00, 0xE0, 0x02, 0xE0 };
	const u8 seq2[] = {
		0xD3, 0x01,
		0xD0, 0x00,
		0xD0, 0x04,
		/* Whether clicking is done by tapping or pressing. */
		0xD4, CLICK_PRESS_ONLY,
		0xD5, 0x01,
		0xD7, 0x03,
		/* Vertical and horizontal one-finger scroll zone inertia. */
		0xD8, SCROLL_INERTIAL,
		0xDA, 0x05,
		0xDB, 0x02,
		0xE4, 0x05,
		0xD6, 0x01,
		0xDE, 0x04,
		0xE3, 0x01,
		0xCF, 0x00,
		0xD2, 0x03,
		/* Vertical and horizontal two-finger scrolling inertia. */
		0xE5, SCROLL_INERTIAL,
		0xD9, 0x02,
		0xD9, 0x07,
		0xDC, 0x03,
		0xDD, 0x03,
		0xDF, 0x03,
		0xE1, 0x03,
		0xD1, 0x00,
		0xCE, 0x00,
		0xCC, 0x00,
		0xE0, 0x00,
		0xE2, 0x01
	};
	u8 param[4];

	if (byd_send_sequence(psmouse, seq1, ARRAY_SIZE(seq1)))
		return -1;

	/* Send a 0x01 command, which should return 4 bytes. */
	if (ps2_command(&psmouse->ps2dev, param, 0x0401))
		return -1;

	if (byd_send_sequence(psmouse, seq2, ARRAY_SIZE(seq2)))
		return -1;

	return 0;
	return PSMOUSE_FULL_PACKET;
}

/*
 * Send the set of PS/2 commands required to make it identify as an
 * intellimouse with 4-byte instead of 3-byte packets.
 */
static int byd_send_intellimouse_sequence(struct psmouse *psmouse)
static int byd_reset_touchpad(struct psmouse *psmouse)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	u8 param[4];
	int i;
	size_t i;

	const struct {
		u16 command;
		u8 arg;
	} seq[] = {
		{ PSMOUSE_CMD_RESET_BAT, 0 },
		{ PSMOUSE_CMD_RESET_BAT, 0 },
		{ PSMOUSE_CMD_GETID, 0 },
		{ PSMOUSE_CMD_SETSCALE11, 0 },
		{ PSMOUSE_CMD_SETSCALE11, 0 },
		{ PSMOUSE_CMD_SETSCALE11, 0 },
		{ PSMOUSE_CMD_GETINFO, 0 },
		{ PSMOUSE_CMD_SETRES, 0x03 },
		/*
		 * Intellimouse initialization sequence, to get 4-byte instead
		 * of 3-byte packets.
		 */
		{ PSMOUSE_CMD_SETRATE, 0xC8 },
		{ PSMOUSE_CMD_SETRATE, 0x64 },
		{ PSMOUSE_CMD_SETRATE, 0x50 },
		{ PSMOUSE_CMD_GETID, 0 },
		{ PSMOUSE_CMD_SETRATE, 0xC8 },
		{ PSMOUSE_CMD_SETRATE, 0xC8 },
		{ PSMOUSE_CMD_SETRATE, 0x50 },
		{ PSMOUSE_CMD_GETID, 0 },
		{ PSMOUSE_CMD_SETRATE, 0x64 },
		{ PSMOUSE_CMD_SETRES, 0x03 },
		{ PSMOUSE_CMD_ENABLE, 0 }
		{ PSMOUSE_CMD_ENABLE, 0 },
		/*
		 * BYD-specific initialization, which enables absolute mode and
		 * (if desired), the touchpad's built-in gesture detection.
		 */
		{ 0x10E2, 0x00 },
		{ 0x10E0, 0x02 },
		/* The touchpad should reply with 4 seemingly-random bytes */
		{ 0x14E0, 0x01 },
		/* Pairs of parameters and values. */
		{ BYD_CMD_SET_HANDEDNESS, 0x01 },
		{ BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04 },
		{ BYD_CMD_SET_TAP, 0x02 },
		{ BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04 },
		{ BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04 },
		{ BYD_CMD_SET_EDGE_MOTION, 0x01 },
		{ BYD_CMD_SET_PALM_CHECK, 0x00 },
		{ BYD_CMD_SET_MULTITOUCH, 0x02 },
		{ BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04 },
		{ BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04 },
		{ BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 },
		{ BYD_CMD_SET_TOP_EDGE_REGION, 0x00 },
		{ BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 },
		{ BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 },
		{ BYD_CMD_SET_ABSOLUTE_MODE, 0x02 },
		/* Finalize initialization. */
		{ 0x10E0, 0x00 },
		{ 0x10E2, 0x01 },
	};

	memset(param, 0, sizeof(param));
	for (i = 0; i < ARRAY_SIZE(seq); ++i) {
		memset(param, 0, sizeof(param));
		param[0] = seq[i].arg;
		if (ps2_command(ps2dev, param, seq[i].command))
			return -1;
	}

	return 0;
}

static int byd_reset_touchpad(struct psmouse *psmouse)
{
	if (byd_send_intellimouse_sequence(psmouse))
		return -EIO;

	if (byd_enable(psmouse))
			return -EIO;
	}

	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
	return 0;
}

@@ -314,9 +419,50 @@ static int byd_reconnect(struct psmouse *psmouse)
	return 0;
}

static void byd_disconnect(struct psmouse *psmouse)
{
	struct byd_data *priv = psmouse->private;

	if (priv) {
		del_timer(&priv->timer);
		kfree(psmouse->private);
		psmouse->private = NULL;
	}
}

int byd_detect(struct psmouse *psmouse, bool set_properties)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	u8 param[4] = {0x03, 0x00, 0x00, 0x00};

	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
		return -1;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
		return -1;

	if (param[1] != 0x03 || param[2] != 0x64)
		return -ENODEV;

	psmouse_dbg(psmouse, "BYD touchpad detected\n");

	if (set_properties) {
		psmouse->vendor = "BYD";
		psmouse->name = "TouchPad";
	}

	return 0;
}

int byd_init(struct psmouse *psmouse)
{
	struct input_dev *dev = psmouse->dev;
	struct byd_data *priv;

	if (psmouse_reset(psmouse))
		return -EIO;
@@ -324,14 +470,39 @@ int byd_init(struct psmouse *psmouse)
	if (byd_reset_touchpad(psmouse))
		return -EIO;

	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	memset(priv, 0, sizeof(*priv));
	setup_timer(&priv->timer, byd_clear_touch, (unsigned long) psmouse);

	psmouse->private = priv;
	psmouse->disconnect = byd_disconnect;
	psmouse->reconnect = byd_reconnect;
	psmouse->protocol_handler = byd_process_byte;
	psmouse->pktsize = 4;
	psmouse->resync_time = 0;

	__set_bit(BTN_MIDDLE, dev->keybit);
	__set_bit(REL_WHEEL, dev->relbit);
	__set_bit(REL_HWHEEL, dev->relbit);
	__set_bit(INPUT_PROP_POINTER, dev->propbit);
	/* Touchpad */
	__set_bit(BTN_TOUCH, dev->keybit);
	__set_bit(BTN_TOOL_FINGER, dev->keybit);
	/* Buttons */
	__set_bit(BTN_LEFT, dev->keybit);
	__set_bit(BTN_RIGHT, dev->keybit);
	__clear_bit(BTN_MIDDLE, dev->keybit);

	/* Absolute position */
	__set_bit(EV_ABS, dev->evbit);
	input_set_abs_params(dev, ABS_X, 0, BYD_PAD_WIDTH, 0, 0);
	input_set_abs_params(dev, ABS_Y, 0, BYD_PAD_HEIGHT, 0, 0);
	input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION);
	input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION);
	/* No relative support */
	__clear_bit(EV_REL, dev->evbit);
	__clear_bit(REL_X, dev->relbit);
	__clear_bit(REL_Y, dev->relbit);

	return 0;
}
+1 −1
Original line number Diff line number Diff line
@@ -846,7 +846,7 @@ static const struct psmouse_protocol psmouse_protocols[] = {
#ifdef CONFIG_MOUSE_PS2_BYD
	{
		.type		= PSMOUSE_BYD,
		.name		= "BydPS/2",
		.name		= "BYDPS/2",
		.alias		= "byd",
		.detect		= byd_detect,
		.init		= byd_init,
+3 −2
Original line number Diff line number Diff line
@@ -862,8 +862,9 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse,
	if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
		return;

	/* Bug in FW 8.1, buttons are reported only when ExtBit is 1 */
	if (SYN_ID_FULL(priv->identity) == 0x801 &&
	/* Bug in FW 8.1 & 8.2, buttons are reported only when ExtBit is 1 */
	if ((SYN_ID_FULL(priv->identity) == 0x801 ||
	     SYN_ID_FULL(priv->identity) == 0x802) &&
	    !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02))
		return;

Loading