Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b790c2ca authored by Heiko Stübner's avatar Heiko Stübner Committed by Olof Johansson
Browse files

arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board 



In terms of peripherals the rk3368 is quite similar to the rk3288, which
makes it possible to have a lot basic components working in the first go.
More to follow once I tracked down all the tiny differences that still
exist in some parts.

With these dts files, the R88 board is able to boot from an attached
usb device and most likely from its emmc too, if the emmc uses a standard
partition table instead of Rockchip's own one - the emmc itself is
detected correctly.

Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent ee0ee14e

arch/arm64/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -7,6 +7,7 @@ dts-dirs += freescale 
dts-dirs += hisilicon

dts-dirs += mediatek

dts-dirs += qcom

dts-dirs += rockchip

dts-dirs += sprd

dts-dirs += xilinx

arch/arm64/boot/dts/rockchip/Makefile

0 → 100644
+5 −0
Original line number Diff line number Diff line 
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb



always		:= $(dtb-y)

subdir-y	:= $(dts-dirs)

clean-files	:= *.dtb

arch/arm64/boot/dts/rockchip/rk3368-r88.dts

0 → 100644
+354 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "rk3368.dtsi"



/ {

	model = "Rockchip R88";

	compatible = "rockchip,r88", "rockchip,rk3368";



	chosen {

		stdout-path = "serial2:115200n8";

	};



	memory {

		device_type = "memory";

		reg = <0x0 0x0 0x0 0x40000000>;

	};



	emmc_pwrseq: emmc-pwrseq {

		compatible = "mmc-pwrseq-emmc";

		pinctrl-0 = <&emmc_reset>;

		pinctrl-names = "default";

		reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;

	};



	keys: gpio-keys {

		compatible = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;

		pinctrl-names = "default";

		pinctrl-0 = <&pwr_key>;



		button@0 {

			gpio-key,wakeup = <1>;

			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;

			label = "GPIO Power";

			linux,code = <116>;

		};

	};



	leds: gpio-leds {

		compatible = "gpio-leds";



		work {

			gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;

			label = "r88:green:led";

			pinctrl-names = "default";

			pinctrl-0 = <&led_ctl>;

		};

	};



	ir: ir-receiver {

		compatible = "gpio-ir-receiver";

		gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&ir_int>;

	};



	sdio_pwrseq: sdio-pwrseq {

		compatible = "mmc-pwrseq-simple";

		clocks = <&hym8563>;

		clock-names = "ext_clock";

		pinctrl-names = "default";

		pinctrl-0 = <&bt_rst>, <&wifi_reg_on>;



		reset-gpios =

			/* BT_RST_N */

			<&gpio3 5 GPIO_ACTIVE_LOW>,



			/* WL_REG_ON */

			<&gpio3 4 GPIO_ACTIVE_LOW>;

	};



	vcc_18: vcc18-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vcc_18";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_sys>;

	};



	/* supplies both host and otg */

	vcc_host: vcc-host-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&host_vbus_drv>;

		regulator-name = "vcc_host";

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_sys>;

	};



	vcc_io: vcc-io-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vcc_io";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_sys>;

	};



	vcc_lan: vcc-lan-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vcc_lan";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_io>;

	};



	vcc_sys: vcc-sys-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vcc_sys";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

		regulator-boot-on;

	};



	vccio_wl: vccio-wl-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vccio_wl";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_io>;

	};



	vdd_10: vdd-10-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vdd_10";

		regulator-min-microvolt = <1000000>;

		regulator-max-microvolt = <1000000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_sys>;

	};

};



&emmc {

	broken-cd;

	bus-width = <8>;

	cap-mmc-highspeed;

	disable-wp;

	mmc-pwrseq = <&emmc_pwrseq>;

	non-removable;

	num-slots = <1>;

	pinctrl-names = "default";

	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;

	status = "okay";

};



&gmac {

	phy-supply = <&vcc_lan>;

	phy-mode = "rmii";

	clock_in_out = "output";

	snps,reset-gpio = <&gpio3 12 0>;

	snps,reset-active-low;

	snps,reset-delays-us = <0 10000 1000000>;

	pinctrl-names = "default";

	pinctrl-0 = <&rmii_pins>;

	tx_delay = <0x30>;

	rx_delay = <0x10>;

	status = "ok";

};



&i2c0 {

	status = "okay";



	vdd_cpu: syr827@40 {

		compatible = "silergy,syr827";

		reg = <0x40>;

		fcs,suspend-voltage-selector = <1>;

		regulator-name = "vdd_cpu";

		regulator-enable-ramp-delay = <300>;

		regulator-min-microvolt = <712500>;

		regulator-max-microvolt = <1500000>;

		regulator-ramp-delay = <8000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vcc_sys>;

	};



	hym8563: hym8563@51 {

		compatible = "haoyu,hym8563";

		reg = <0x51>;

		#clock-cells = <0>;

		clock-frequency = <32768>;

		clock-output-names = "xin32k";

		/* rtc_int is not connected */

	};

};



&sdio0 {

	assigned-clocks = <&cru SCLK_SDIO0>;

	assigned-clock-parents = <&cru PLL_CPLL>;

	broken-cd;

	bus-width = <4>;

	cap-sd-highspeed;

	cap-sdio-irq;

	keep-power-in-suspend;

	mmc-pwrseq = <&sdio_pwrseq>;

	non-removable;

	num-slots = <1>;

	pinctrl-names = "default";

	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;

	vmmc-supply = <&vcc_io>;

	vqmmc-supply = <&vccio_wl>;

	status = "okay";

};



&pinctrl {

	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {

		bias-disable;

		drive-strength = <8>;

	};



	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {

		bias-pull-up;

		drive-strength = <8>;

	};



	emmc {

		emmc_bus8: emmc-bus8 {

			rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,

					<1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,

					<1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,

					<1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,

					<1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,

					<1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,

					<1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,

					<1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;

		};



		emmc-clk {

			rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;

		};



		emmc-cmd {

			rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;

		};



		emmc_reset: emmc-reset {

			rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	ir {

		ir_int: ir-int {

			rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	keys {

		pwr_key: pwr-key {

			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};



	leds {

		stby_pwren: stby-pwren {

			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		led_ctl: led-ctl {

			rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	sdio {

		wifi_reg_on: wifi-reg-on {

			rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;

		};



		bt_rst: bt-rst {

			rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};



	usb {

		host_vbus_drv: host-vbus-drv {

			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};

};



&saradc {

	vref-supply = <&vcc_18>;

	status = "okay";

};



&uart2 {

	status = "okay";

};



&usb_host0_ehci {

	status = "okay";

};



&usb_otg {

	dr_mode = "host";

	status = "okay";

};



&wdt {

	status = "okay";

};

arch/arm64/boot/dts/rockchip/rk3368.dtsi

0 → 100644
+900 −0

File added.

Preview size limit exceeded, changes collapsed.