Loading drivers/net/wireless/Kconfig +16 −1 Original line number Diff line number Diff line Loading @@ -214,6 +214,21 @@ config HERMES configure your card and that /etc/pcmcia/wireless.opts works : <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> config HERMES_CACHE_FW_ON_INIT bool "Cache Hermes firmware on driver initialisation" depends on HERMES default y ---help--- Say Y to cache any firmware required by the Hermes drivers on startup. The firmware will remain cached until the driver is unloaded. The cache uses 64K of RAM. Otherwise load the firmware from userspace as required. In this case the driver should be unloaded and restarted whenever the firmware is changed. If you are not sure, say Y. config APPLE_AIRPORT tristate "Apple Airport support (built-in)" depends on PPC_PMAC && HERMES Loading Loading @@ -508,7 +523,7 @@ config RTL8180 config RTL8187 tristate "Realtek 8187 and 8187B USB support" depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL depends on MAC80211 && USB && WLAN_80211 select EEPROM_93CX6 ---help--- This is a driver for RTL8187 and RTL8187B based cards. Loading drivers/net/wireless/ath5k/ath5k.h +0 −7 Original line number Diff line number Diff line Loading @@ -821,13 +821,6 @@ struct ath5k_athchan_2ghz { return (false); \ } while (0) enum ath5k_ant_setting { AR5K_ANT_VARIABLE = 0, /* variable by programming */ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ AR5K_ANT_MAX = 3, }; /* * Hardware interrupt abstraction */ Loading drivers/net/wireless/ath5k/attach.c +3 −9 Original line number Diff line number Diff line Loading @@ -106,7 +106,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) { struct ath5k_hw *ah; struct pci_dev *pdev = sc->pdev; u8 mac[ETH_ALEN]; u8 mac[ETH_ALEN] = {}; int ret; u32 srev; Loading Loading @@ -317,15 +317,9 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) goto err_free; } /* Set MAC address */ ret = ath5k_eeprom_read_mac(ah, mac); if (ret) { ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", sc->pdev->device); goto err_free; } /* MAC address is cleared until add_interface */ ath5k_hw_set_lladdr(ah, mac); /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ memset(ah->ah_bssid, 0xff, ETH_ALEN); ath5k_hw_set_associd(ah, ah->ah_bssid, 0); Loading drivers/net/wireless/ath5k/base.c +12 −3 Original line number Diff line number Diff line Loading @@ -200,7 +200,7 @@ static int ath5k_pci_resume(struct pci_dev *pdev); #endif /* CONFIG_PM */ static struct pci_driver ath5k_pci_driver = { .name = "ath5k_pci", .name = KBUILD_MODNAME, .id_table = ath5k_pci_id_table, .probe = ath5k_pci_probe, .remove = __devexit_p(ath5k_pci_remove), Loading Loading @@ -707,7 +707,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) { struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; u8 mac[ETH_ALEN]; u8 mac[ETH_ALEN] = {}; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); Loading Loading @@ -777,7 +777,13 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); ath5k_hw_get_lladdr(ah, mac); ret = ath5k_eeprom_read_mac(ah, mac); if (ret) { ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", sc->pdev->device); goto err_queues; } SET_IEEE80211_PERM_ADDR(hw, mac); /* All MAC address bits matter for ACKs */ memset(sc->bssidmask, 0xff, ETH_ALEN); Loading Loading @@ -2765,6 +2771,7 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, /* Set to a reasonable value. Note that this will * be set to mac80211's value at ath5k_config(). */ sc->bintval = 1000; ath5k_hw_set_lladdr(sc->ah, conf->mac_addr); ret = 0; end: Loading @@ -2777,11 +2784,13 @@ ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct ath5k_softc *sc = hw->priv; u8 mac[ETH_ALEN] = {}; mutex_lock(&sc->lock); if (sc->vif != conf->vif) goto end; ath5k_hw_set_lladdr(sc->ah, mac); sc->vif = NULL; end: mutex_unlock(&sc->lock); Loading drivers/net/wireless/ath5k/eeprom.c +1047 −147 File changed.Preview size limit exceeded, changes collapsed. Show changes Loading
drivers/net/wireless/Kconfig +16 −1 Original line number Diff line number Diff line Loading @@ -214,6 +214,21 @@ config HERMES configure your card and that /etc/pcmcia/wireless.opts works : <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> config HERMES_CACHE_FW_ON_INIT bool "Cache Hermes firmware on driver initialisation" depends on HERMES default y ---help--- Say Y to cache any firmware required by the Hermes drivers on startup. The firmware will remain cached until the driver is unloaded. The cache uses 64K of RAM. Otherwise load the firmware from userspace as required. In this case the driver should be unloaded and restarted whenever the firmware is changed. If you are not sure, say Y. config APPLE_AIRPORT tristate "Apple Airport support (built-in)" depends on PPC_PMAC && HERMES Loading Loading @@ -508,7 +523,7 @@ config RTL8180 config RTL8187 tristate "Realtek 8187 and 8187B USB support" depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL depends on MAC80211 && USB && WLAN_80211 select EEPROM_93CX6 ---help--- This is a driver for RTL8187 and RTL8187B based cards. Loading
drivers/net/wireless/ath5k/ath5k.h +0 −7 Original line number Diff line number Diff line Loading @@ -821,13 +821,6 @@ struct ath5k_athchan_2ghz { return (false); \ } while (0) enum ath5k_ant_setting { AR5K_ANT_VARIABLE = 0, /* variable by programming */ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ AR5K_ANT_MAX = 3, }; /* * Hardware interrupt abstraction */ Loading
drivers/net/wireless/ath5k/attach.c +3 −9 Original line number Diff line number Diff line Loading @@ -106,7 +106,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) { struct ath5k_hw *ah; struct pci_dev *pdev = sc->pdev; u8 mac[ETH_ALEN]; u8 mac[ETH_ALEN] = {}; int ret; u32 srev; Loading Loading @@ -317,15 +317,9 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) goto err_free; } /* Set MAC address */ ret = ath5k_eeprom_read_mac(ah, mac); if (ret) { ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", sc->pdev->device); goto err_free; } /* MAC address is cleared until add_interface */ ath5k_hw_set_lladdr(ah, mac); /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ memset(ah->ah_bssid, 0xff, ETH_ALEN); ath5k_hw_set_associd(ah, ah->ah_bssid, 0); Loading
drivers/net/wireless/ath5k/base.c +12 −3 Original line number Diff line number Diff line Loading @@ -200,7 +200,7 @@ static int ath5k_pci_resume(struct pci_dev *pdev); #endif /* CONFIG_PM */ static struct pci_driver ath5k_pci_driver = { .name = "ath5k_pci", .name = KBUILD_MODNAME, .id_table = ath5k_pci_id_table, .probe = ath5k_pci_probe, .remove = __devexit_p(ath5k_pci_remove), Loading Loading @@ -707,7 +707,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) { struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; u8 mac[ETH_ALEN]; u8 mac[ETH_ALEN] = {}; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); Loading Loading @@ -777,7 +777,13 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); ath5k_hw_get_lladdr(ah, mac); ret = ath5k_eeprom_read_mac(ah, mac); if (ret) { ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", sc->pdev->device); goto err_queues; } SET_IEEE80211_PERM_ADDR(hw, mac); /* All MAC address bits matter for ACKs */ memset(sc->bssidmask, 0xff, ETH_ALEN); Loading Loading @@ -2765,6 +2771,7 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, /* Set to a reasonable value. Note that this will * be set to mac80211's value at ath5k_config(). */ sc->bintval = 1000; ath5k_hw_set_lladdr(sc->ah, conf->mac_addr); ret = 0; end: Loading @@ -2777,11 +2784,13 @@ ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct ath5k_softc *sc = hw->priv; u8 mac[ETH_ALEN] = {}; mutex_lock(&sc->lock); if (sc->vif != conf->vif) goto end; ath5k_hw_set_lladdr(sc->ah, mac); sc->vif = NULL; end: mutex_unlock(&sc->lock); Loading
drivers/net/wireless/ath5k/eeprom.c +1047 −147 File changed.Preview size limit exceeded, changes collapsed. Show changes