Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a7a19fac authored by David Brownell's avatar David Brownell Committed by Greg Kroah-Hartman
Browse files

usb: gadget Kconfig cleanup 



This reorders the list of USB peripheral controller drivers so it's
more common for the initial (default) value to be relevant:  put the
SOC integrated silicon up front, discrete stuff last.  Alphabetize.

Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 27140219

drivers/usb/gadget/Kconfig

+144 −121
Original line number Diff line number Diff line
@@ -85,6 +85,13 @@ config USB_GADGET_SELECTED 
#

# USB Peripheral Controller Support

#

# The order here is alphabetical, except that integrated controllers go

# before discrete ones so they will be the initial/default value:

#   - integrated/SOC controllers first

#   - licensed IP used in both SOC and discrete versions

#   - discrete ones (including all PCI-only controllers)

#   - debug/dummy gadget+hcd is last.

#

choice

	prompt "USB Peripheral Controller"

	depends on USB_GADGET
@@ -94,26 +101,27 @@ choice 
	   Many controller drivers are platform-specific; these

	   often need board-specific hooks.



config USB_GADGET_AMD5536UDC

	boolean "AMD5536 UDC"

	depends on PCI

	select USB_GADGET_DUALSPEED

#

# Integrated controllers

#



config USB_GADGET_AT91

	boolean "Atmel AT91 USB Device Port"

	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9

	select USB_GADGET_SELECTED

	help

	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.

	   It is a USB Highspeed DMA capable USB device controller. Beside ep0

	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).

	   The UDC port supports OTG operation, and may be used as a host port

	   if it's not being used to implement peripheral or OTG roles.

	   Many Atmel AT91 processors (such as the AT91RM2000) have a

	   full speed USB Device Port with support for five configurable

	   endpoints (plus endpoint zero).



	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "amd5536udc" and force all

	   dynamically linked module called "at91_udc" and force all

	   gadget drivers to also be dynamically linked.



config USB_AMD5536UDC

config USB_AT91

	tristate

	depends on USB_GADGET_AMD5536UDC

	depends on USB_GADGET_AT91

	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_GADGET_ATMEL_USBA

	boolean "Atmel USBA"
@@ -150,28 +158,50 @@ config USB_FSL_USB2 
	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_GADGET_NET2280

	boolean "NetChip 228x"

	depends on PCI

	select USB_GADGET_DUALSPEED

config USB_GADGET_LH7A40X

	boolean "LH7A40X"

	depends on ARCH_LH7A40X

	help

	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which

	   supports both full and high speed USB 2.0 data transfers.  

	   This driver provides USB Device Controller driver for LH7A40x



	   It has six configurable endpoints, as well as endpoint zero

	   (for control transfers) and several endpoints with dedicated

	   functions.

config USB_LH7A40X

	tristate

	depends on USB_GADGET_LH7A40X

	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_GADGET_OMAP

	boolean "OMAP USB Device Controller"

	depends on ARCH_OMAP

	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3

	help

	   Many Texas Instruments OMAP processors have flexible full

	   speed USB device controllers, with support for up to 30

	   endpoints (plus endpoint zero).  This driver supports the

	   controller in the OMAP 1611, and should work with controllers

	   in other OMAP processors too, given minor tweaks.



	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "net2280" and force all

	   dynamically linked module called "omap_udc" and force all

	   gadget drivers to also be dynamically linked.



config USB_NET2280

config USB_OMAP

	tristate

	depends on USB_GADGET_NET2280

	depends on USB_GADGET_OMAP

	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_OTG

	boolean "OTG Support"

	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD

	help

	   The most notable feature of USB OTG is support for a

	   "Dual-Role" device, which can act as either a device

	   or a host.  The initial role choice can be changed

	   later, when two dual-role devices talk to each other.



	   Select this only if your OMAP board has a Mini-AB connector.



config USB_GADGET_PXA25X

	boolean "PXA 25x or IXP 4xx"

	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
@@ -203,34 +233,6 @@ config USB_PXA25X_SMALL 
	default y if USB_ETH

	default y if USB_G_SERIAL



config USB_GADGET_M66592

	boolean "Renesas M66592 USB Peripheral Controller"

	select USB_GADGET_DUALSPEED

	help

	   M66592 is a discrete USB peripheral controller chip that

	   supports both full and high speed USB 2.0 data transfers.

	   It has seven configurable endpoints, and endpoint zero.



	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "m66592_udc" and force all

	   gadget drivers to also be dynamically linked.



config USB_M66592

	tristate

	depends on USB_GADGET_M66592

	default USB_GADGET

	select USB_GADGET_SELECTED



config SUPERH_BUILT_IN_M66592

	boolean "Enable SuperH built-in USB like the M66592"

	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722

	help

	   SH7722 has USB like the M66592.



	   The transfer rate is very slow when use "Ethernet Gadget".

	   However, this problem is improved if change a value of

	   NET_IP_ALIGN to 4.



config USB_GADGET_PXA27X

	boolean "PXA 27x"

	depends on ARCH_PXA && PXA27x
@@ -251,40 +253,32 @@ config USB_PXA27X 
	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_GADGET_GOKU

	boolean "Toshiba TC86C001 'Goku-S'"

	depends on PCI

config USB_GADGET_S3C2410

	boolean "S3C2410 USB Device Controller"

	depends on ARCH_S3C2410

	help

	   The Toshiba TC86C001 is a PCI device which includes controllers

	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).

	   

	   The device controller has three configurable (bulk or interrupt)

	   endpoints, plus endpoint zero (for control transfers).

	  Samsung's S3C2410 is an ARM-4 processor with an integrated

	  full speed USB 1.1 device controller.  It has 4 configurable

	  endpoints, as well as endpoint zero (for control transfers).



	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "goku_udc" and to force all

	   gadget drivers to also be dynamically linked.

	  This driver has been tested on the S3C2410, S3C2412, and

	  S3C2440 processors.



config USB_GOKU

config USB_S3C2410

	tristate

	depends on USB_GADGET_GOKU

	depends on USB_GADGET_S3C2410

	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_S3C2410_DEBUG

	boolean "S3C2410 udc debug messages"

	depends on USB_GADGET_S3C2410



config USB_GADGET_LH7A40X

	boolean "LH7A40X"

	depends on ARCH_LH7A40X

	help

    This driver provides USB Device Controller driver for LH7A40x



config USB_LH7A40X

	tristate

	depends on USB_GADGET_LH7A40X

	default USB_GADGET

	select USB_GADGET_SELECTED

#

# Controllers available in both integrated and discrete versions

#



# built in ../musb along with host support

# musb builds in ../musb along with host support

config USB_GADGET_MUSB_HDRC

	boolean "Inventra HDRC USB Peripheral (TI, ...)"

	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
@@ -294,76 +288,105 @@ config USB_GADGET_MUSB_HDRC 
	  This OTG-capable silicon IP is used in dual designs including

	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.



config USB_GADGET_OMAP

	boolean "OMAP USB Device Controller"

	depends on ARCH_OMAP

	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3

config USB_GADGET_M66592

	boolean "Renesas M66592 USB Peripheral Controller"

	select USB_GADGET_DUALSPEED

	help

	   Many Texas Instruments OMAP processors have flexible full

	   speed USB device controllers, with support for up to 30

	   endpoints (plus endpoint zero).  This driver supports the

	   controller in the OMAP 1611, and should work with controllers

	   in other OMAP processors too, given minor tweaks.

	   M66592 is a discrete USB peripheral controller chip that

	   supports both full and high speed USB 2.0 data transfers.

	   It has seven configurable endpoints, and endpoint zero.



	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "omap_udc" and force all

	   dynamically linked module called "m66592_udc" and force all

	   gadget drivers to also be dynamically linked.



config USB_OMAP

config USB_M66592

	tristate

	depends on USB_GADGET_OMAP

	depends on USB_GADGET_M66592

	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_OTG

	boolean "OTG Support"

	depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD

config SUPERH_BUILT_IN_M66592

	boolean "Enable SuperH built-in USB like the M66592"

	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722

	help

	   The most notable feature of USB OTG is support for a

	   "Dual-Role" device, which can act as either a device

	   or a host.  The initial role choice can be changed

	   later, when two dual-role devices talk to each other.

	   SH7722 has USB like the M66592.



	   Select this only if your OMAP board has a Mini-AB connector.

	   The transfer rate is very slow when use "Ethernet Gadget".

	   However, this problem is improved if change a value of

	   NET_IP_ALIGN to 4.



config USB_GADGET_S3C2410

	boolean "S3C2410 USB Device Controller"

	depends on ARCH_S3C2410

#

# Controllers available only in discrete form (and all PCI controllers)

#



config USB_GADGET_AMD5536UDC

	boolean "AMD5536 UDC"

	depends on PCI

	select USB_GADGET_DUALSPEED

	help

	  Samsung's S3C2410 is an ARM-4 processor with an integrated

	  full speed USB 1.1 device controller.  It has 4 configurable

	  endpoints, as well as endpoint zero (for control transfers).

	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.

	   It is a USB Highspeed DMA capable USB device controller. Beside ep0

	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).

	   The UDC port supports OTG operation, and may be used as a host port

	   if it's not being used to implement peripheral or OTG roles.



	  This driver has been tested on the S3C2410, S3C2412, and

	  S3C2440 processors.

	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "amd5536udc" and force all

	   gadget drivers to also be dynamically linked.



config USB_S3C2410

config USB_AMD5536UDC

	tristate

	depends on USB_GADGET_S3C2410

	depends on USB_GADGET_AMD5536UDC

	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_S3C2410_DEBUG

	boolean "S3C2410 udc debug messages"

	depends on USB_GADGET_S3C2410

config USB_GADGET_NET2280

	boolean "NetChip 228x"

	depends on PCI

	select USB_GADGET_DUALSPEED

	help

	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which

	   supports both full and high speed USB 2.0 data transfers.



config USB_GADGET_AT91

	boolean "AT91 USB Device Port"

	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9

	   It has six configurable endpoints, as well as endpoint zero

	   (for control transfers) and several endpoints with dedicated

	   functions.



	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "net2280" and force all

	   gadget drivers to also be dynamically linked.



config USB_NET2280

	tristate

	depends on USB_GADGET_NET2280

	default USB_GADGET

	select USB_GADGET_SELECTED



config USB_GADGET_GOKU

	boolean "Toshiba TC86C001 'Goku-S'"

	depends on PCI

	help

	   Many Atmel AT91 processors (such as the AT91RM2000) have a

	   full speed USB Device Port with support for five configurable

	   endpoints (plus endpoint zero).

	   The Toshiba TC86C001 is a PCI device which includes controllers

	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).



	   The device controller has three configurable (bulk or interrupt)

	   endpoints, plus endpoint zero (for control transfers).



	   Say "y" to link the driver statically, or "m" to build a

	   dynamically linked module called "at91_udc" and force all

	   dynamically linked module called "goku_udc" and to force all

	   gadget drivers to also be dynamically linked.



config USB_AT91

config USB_GOKU

	tristate

	depends on USB_GADGET_AT91

	depends on USB_GADGET_GOKU

	default USB_GADGET

	select USB_GADGET_SELECTED





#

# LAST -- dummy/emulated controller

#



config USB_GADGET_DUMMY_HCD

	boolean "Dummy HCD (DEVELOPMENT)"