GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio

Lantiq SoC External Bus memory mapped GPIO controller

By attaching hardware latches to the EBU it is possible to create output

only gpios. This driver configures a special memory address, which when

written to outputs 16 bit to the latches.

The node describing the memory mapped GPIOs needs to be a child of the node

describing the "lantiq,localbus".

Required properties:

- compatible : Should be "lantiq,gpio-mm-lantiq"

- reg : Address and length of the register set for the device

- #gpio-cells : Should be two.  The first cell is the pin number and

  the second cell is used to specify optional parameters (currently

  unused).

- gpio-controller : Marks the device node as a gpio controller.

Optional properties:

- lantiq,shadow : The default value that we shall assume as already set on the

  shift register cascade.

Example:

localbus@0 {

	#address-cells = <2>;

	#size-cells = <1>;

	ranges = <0 0 0x0 0x3ffffff /* addrsel0 */

		1 0 0x4000000 0x4000010>; /* addsel1 */

	compatible = "lantiq,localbus", "simple-bus";

	gpio_mm0: gpio@4000000 {

		compatible = "lantiq,gpio-mm";

		reg = <1 0x0 0x10>;

		gpio-controller;

		#gpio-cells = <2>;

		lantiq,shadow = <0x77f>

	};

}

 *  under the terms of the GNU General Public License version 2 as published

 *  under the terms of the GNU General Public License version 2 as published

 *  by the Free Software Foundation.

 *  by the Free Software Foundation.

 *

 *

 *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>

 *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>

 */

 */

#include <linux/init.h>

#include <linux/init.h>

#include <linux/export.h>

#include <linux/module.h>

#include <linux/types.h>

#include <linux/types.h>

#include <linux/platform_device.h>

#include <linux/platform_device.h>

#include <linux/mutex.h>

#include <linux/mutex.h>

#include <linux/gpio.h>

#include <linux/gpio.h>

#include <linux/of.h>

#include <linux/of_gpio.h>

#include <linux/io.h>

#include <linux/io.h>

#include <linux/slab.h>

#include <lantiq_soc.h>

#include <lantiq_soc.h>

#define LTQ_EBU_BUSCON	0x1e7ff		/* 16 bit access, slowest timing */

#define LTQ_EBU_BUSCON	0x1e7ff		/* 16 bit access, slowest timing */

#define LTQ_EBU_WP	0x80000000	/* write protect bit */

#define LTQ_EBU_WP	0x80000000	/* write protect bit */

/* we keep a shadow value of the last value written to the ebu */

struct ltq_mm {

static int ltq_ebu_gpio_shadow = 0x0;

	struct of_mm_gpio_chip mmchip;

static void __iomem *ltq_ebu_gpio_membase;

	u16 shadow;	/* shadow the latches state */

};

static void ltq_ebu_apply(void)

/**

 * ltq_mm_apply() - write the shadow value to the ebu address.

 * @chip:     Pointer to our private data structure.

 *

 * Write the shadow value to the EBU to set the gpios. We need to set the

 * global EBU lock to make sure that PCI/MTD dont break.

 */

static void ltq_mm_apply(struct ltq_mm *chip)

{

{

	unsigned long flags;

	unsigned long flags;

	spin_lock_irqsave(&ebu_lock, flags);

	spin_lock_irqsave(&ebu_lock, flags);

	ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);

	ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);

	*((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow;

	__raw_writew(chip->shadow, chip->mmchip.regs);

	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);

	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);

	spin_unlock_irqrestore(&ebu_lock, flags);

	spin_unlock_irqrestore(&ebu_lock, flags);

}

}

static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)

/**

 * ltq_mm_set() - gpio_chip->set - set gpios.

 * @gc:     Pointer to gpio_chip device structure.

 * @gpio:   GPIO signal number.

 * @val:    Value to be written to specified signal.

 *

 * Set the shadow value and call ltq_mm_apply.

 */

static void ltq_mm_set(struct gpio_chip *gc, unsigned offset, int value)

{

{

	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);

	struct ltq_mm *chip =

		container_of(mm_gc, struct ltq_mm, mmchip);

	if (value)

	if (value)

		ltq_ebu_gpio_shadow |= (1 << offset);

		chip->shadow |= (1 << offset);

	else

	else

		ltq_ebu_gpio_shadow &= ~(1 << offset);

		chip->shadow &= ~(1 << offset);

	ltq_ebu_apply();

	ltq_mm_apply(chip);

}

}

static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset,

/**

	int value)

 * ltq_mm_dir_out() - gpio_chip->dir_out - set gpio direction.

 * @gc:     Pointer to gpio_chip device structure.

 * @gpio:   GPIO signal number.

 * @val:    Value to be written to specified signal.

 *

 * Same as ltq_mm_set, always returns 0.

 */

static int ltq_mm_dir_out(struct gpio_chip *gc, unsigned offset, int value)

{

{

	ltq_ebu_set(chip, offset, value);

	ltq_mm_set(gc, offset, value);

	return 0;

	return 0;

}

}

static struct gpio_chip ltq_ebu_chip = {

/**

	.label = "ltq_ebu",

 * ltq_mm_save_regs() - Set initial values of GPIO pins

	.direction_output = ltq_ebu_direction_output,

 * @mm_gc: pointer to memory mapped GPIO chip structure

	.set = ltq_ebu_set,

 */

	.base = 72,

static void ltq_mm_save_regs(struct of_mm_gpio_chip *mm_gc)

	.ngpio = 16,

{

	.can_sleep = 1,

	struct ltq_mm *chip =

	.owner = THIS_MODULE,

		container_of(mm_gc, struct ltq_mm, mmchip);

};

	/* tell the ebu controller which memory address we will be using */

	ltq_ebu_w32(CPHYSADDR(chip->mmchip.regs) | 0x1, LTQ_EBU_ADDRSEL1);

	ltq_mm_apply(chip);

}

static int ltq_ebu_probe(struct platform_device *pdev)

static int ltq_mm_probe(struct platform_device *pdev)

{

{

	int ret = 0;

	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	struct ltq_mm *chip;

	const __be32 *shadow;

	int ret = 0;

	if (!res) {

	if (!res) {

		dev_err(&pdev->dev, "failed to get memory resource\n");

		dev_err(&pdev->dev, "failed to get memory resource\n");

		return -ENOENT;

		return -ENOENT;

	}

	}

	res = devm_request_mem_region(&pdev->dev, res->start,

	chip = kzalloc(sizeof(*chip), GFP_KERNEL);

		resource_size(res), dev_name(&pdev->dev));

	if (!chip)

	if (!res) {

		dev_err(&pdev->dev, "failed to request memory resource\n");

		return -EBUSY;

	}

	ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start,

		resource_size(res));

	if (!ltq_ebu_gpio_membase) {

		dev_err(&pdev->dev, "Failed to ioremap mem region\n");

		return -ENOMEM;

		return -ENOMEM;

	}

	/* grab the default shadow value passed form the platform code */

	chip->mmchip.gc.ngpio = 16;

	ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data;

	chip->mmchip.gc.label = "gpio-mm-ltq";

	chip->mmchip.gc.direction_output = ltq_mm_dir_out;

	chip->mmchip.gc.set = ltq_mm_set;

	chip->mmchip.save_regs = ltq_mm_save_regs;

	/* tell the ebu controller which memory address we will be using */

	/* store the shadow value if one was passed by the devicetree */

	ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1);

	shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL);

	if (shadow)

		chip->shadow = be32_to_cpu(*shadow);

	/* write protect the region */

	ret = of_mm_gpiochip_add(pdev->dev.of_node, &chip->mmchip);

	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);

	if (ret)

		kfree(chip);

	ret = gpiochip_add(&ltq_ebu_chip);

	if (!ret)

		ltq_ebu_apply();

	return ret;

	return ret;

}

}

static struct platform_driver ltq_ebu_driver = {

static const struct of_device_id ltq_mm_match[] = {

	.probe = ltq_ebu_probe,

	{ .compatible = "lantiq,gpio-mm" },

	{},

};

MODULE_DEVICE_TABLE(of, ltq_mm_match);

static struct platform_driver ltq_mm_driver = {

	.probe = ltq_mm_probe,

	.driver = {

	.driver = {

		.name = "ltq_ebu",

		.name = "gpio-mm-ltq",

		.owner = THIS_MODULE,

		.owner = THIS_MODULE,

		.of_match_table = ltq_mm_match,

	},

	},

};

};

static int __init ltq_ebu_init(void)

static int __init ltq_mm_init(void)

{

{

	int ret = platform_driver_register(&ltq_ebu_driver);

	return platform_driver_register(&ltq_mm_driver);

	if (ret)

		pr_info("ltq_ebu : Error registering platfom driver!");

	return ret;

}

}

postcore_initcall(ltq_ebu_init);

subsys_initcall(ltq_mm_init);