Commit 9d35f3e1 authored Dec 02, 2011 by Stephen Warren Committed by Mark Brown Dec 06, 2011

ASoC: WM8903: Get default irq_active_low from IRQ controller

If the WM8903 is hooked up to an interrupt, set the irq_active_low flag
in the default platform data based on the IRQ's IRQ_TYPE. Map IRQ_TYPE_NONE
(a lack of explicit configuration/restriction) to irq_active_low = false;
the previous default.

This code is mainly added to support device tree interrupt bindings,
although will work perfectly well in a non device tree system too.

Any interrupt controller that supports only a single IRQ_TYPE could
set each IRQ's type based on that restriction. This applies equally
with and without device tree. To cater for interrupt controllers
that don't do this, for which irqd_get_trigger_type() will return
IRQ_TYPE_NONE, the platform data irq_active_low field may be used
in systems that don't use device tree.

With device tree, every IRQ must have some IRQ_TYPE set.

Controllers that support DT and multiple IRQ_TYPEs must define the
interrupts property (as used in interrupt source nodes) such that it
defines the IRQ_TYPE to use. When the core DT setup code initializes
wm8903->irq, the interrupts property will be parsed, and as a side-
effect, set the IRQ's IRQ_TYPE for the WM8903 probe() function to read.

Controllers that support DT and a single IRQ_TYPE could arrange to
set the IRQ_TYPE somehow during their initialization, or hard-code
it during the processing of the child interrupts property.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

parent db817784

sound/soc/codecs/wm8903.c

+40 −0

Original line number	Diff line number	Diff line
		@@ -25,6 +25,7 @@
		#include <linux/i2c.h>
		#include <linux/regmap.h>
		#include <linux/slab.h>
		#include <linux/irq.h>
		#include <sound/core.h>
		#include <sound/jack.h>
		#include <sound/pcm.h>
		@@ -2036,6 +2037,39 @@ static const struct regmap_config wm8903_regmap = {
		.num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults),
		};

		static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c,
		struct wm8903_platform_data *pdata)
		{
		struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
		if (!irq_data) {
		dev_err(&i2c->dev, "Invalid IRQ: %d\n",
		i2c->irq);
		return -EINVAL;
		}

		switch (irqd_get_trigger_type(irq_data)) {
		case IRQ_TYPE_NONE:
		/*
		* We assume the controller imposes no restrictions,
		* so we are able to select active-high
		*/
		/* Fall-through */
		case IRQ_TYPE_LEVEL_HIGH:
		pdata->irq_active_low = false;
		break;
		case IRQ_TYPE_LEVEL_LOW:
		pdata->irq_active_low = true;
		break;
		default:
		dev_err(&i2c->dev,
		"Unsupported IRQ_TYPE %x\n",
		irqd_get_trigger_type(irq_data));
		return -EINVAL;
		}

		return 0;
		}

		static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
		const struct i2c_device_id *id)
		{
		@@ -2071,6 +2105,12 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
		dev_err(&i2c->dev, "Failed to allocate pdata\n");
		return -ENOMEM;
		}

		if (i2c->irq) {
		ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata);
		if (ret != 0)
		return ret;
		}
		}

		ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);