Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 99f83c9c authored by Michael Downey's avatar Michael Downey Committed by Greg Kroah-Hartman
Browse files

[PATCH] USB: add driver for Keyspan Digital Remote 



This driver is a basic keypress input driver for the Keyspan Digital
Remote with part number UIA-11.  Currently there is an older remote with
part number UIA-10 which isn't supported by this driver.  Support for
the older UIA-10 could be added but a binary file is required to be
download to the device, and I don't have that file.  I also don't have a
UIA-10 device so I wouldn't be able to test any of the changes.

Signed-off-by: default avatarMichael Downey <downey@zymeta.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 30e69598

drivers/usb/input/Kconfig

+13 −0
Original line number Diff line number Diff line
@@ -259,3 +259,16 @@ config USB_ATI_REMOTE 
	  To compile this driver as a module, choose M here: the module will be

	  called ati_remote.



config USB_KEYSPAN_REMOTE

	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"

	depends on USB && INPUT && EXPERIMENTAL

	---help---

	  Say Y here if you want to use a Keyspan DMR USB remote control.

	  Currently only the UIA-11 type of receiver has been tested.  The tag

	  on the receiver that connects to the USB port should have a P/N that

	  will tell you what type of DMR you have.  The UIA-10 type is not

	  supported at this time.  This driver maps all buttons to keypress

	  events.



	  To compile this driver as a module, choose M here: the module will

	  be called keyspan_remote.

drivers/usb/input/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o 
obj-$(CONFIG_USB_HID)		+= usbhid.o

obj-$(CONFIG_USB_KBD)		+= usbkbd.o

obj-$(CONFIG_USB_KBTAB)		+= kbtab.o

obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o

obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o

obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o

obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o

drivers/usb/input/keyspan_remote.c

0 → 100644
+633 −0
Original line number Diff line number Diff line 
/*

 * keyspan_remote: USB driver for the Keyspan DMR

 *

 * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)

 *

 *	This program is free software; you can redistribute it and/or

 *	modify it under the terms of the GNU General Public License as

 *	published by the Free Software Foundation, version 2.

 *

 * This driver has been put together with the support of Innosys, Inc.

 * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.

 */



#include <linux/config.h>

#include <linux/kernel.h>

#include <linux/errno.h>

#include <linux/init.h>

#include <linux/slab.h>

#include <linux/module.h>

#include <linux/moduleparam.h>

#include <linux/input.h>

#include <linux/usb.h>



#define DRIVER_VERSION	"v0.1"

#define DRIVER_AUTHOR	"Michael Downey <downey@zymeta.com>"

#define DRIVER_DESC	"Driver for the USB Keyspan remote control."

#define DRIVER_LICENSE	"GPL"



/* Parameters that can be passed to the driver. */

static int debug;

module_param(debug, int, 0444);

MODULE_PARM_DESC(debug, "Enable extra debug messages and information");



/* Vendor and product ids */

#define USB_KEYSPAN_VENDOR_ID		0x06CD

#define USB_KEYSPAN_PRODUCT_UIA11	0x0202



/* Defines for converting the data from the remote. */

#define ZERO		0x18

#define ZERO_MASK	0x1F	/* 5 bits for a 0 */

#define ONE		0x3C

#define ONE_MASK	0x3F	/* 6 bits for a 1 */

#define SYNC		0x3F80

#define SYNC_MASK	0x3FFF	/* 14 bits for a SYNC sequence */

#define STOP		0x00

#define STOP_MASK	0x1F	/* 5 bits for the STOP sequence */

#define GAP		0xFF



#define RECV_SIZE	8	/* The UIA-11 type have a 8 byte limit. */



/* table of devices that work with this driver */

static struct usb_device_id keyspan_table[] = {

	{ USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },

	{ }					/* Terminating entry */

};



/* Structure to store all the real stuff that a remote sends to us. */

struct keyspan_message {

	u16	system;

	u8	button;

	u8	toggle;

};



/* Structure used for all the bit testing magic needed to be done. */

struct bit_tester {

	u32	tester;

	int	len;

	int	pos;

	int	bits_left;

	u8	buffer[32];

};



/* Structure to hold all of our driver specific stuff */

struct usb_keyspan {

	char				name[128];

	char				phys[64];

	struct usb_device*		udev;

	struct input_dev		input;

	struct usb_interface*		interface;

	struct usb_endpoint_descriptor* in_endpoint;

	struct urb*			irq_urb;

	int				open;

	dma_addr_t			in_dma;

	unsigned char*			in_buffer;



	/* variables used to parse messages from remote. */

	struct bit_tester		data;

	int				stage;

	int				toggle;

};



/*

 * Table that maps the 31 possible keycodes to input keys.

 * Currently there are 15 and 17 button models so RESERVED codes

 * are blank areas in the mapping.

 */

static int keyspan_key_table[] = {

	KEY_RESERVED,		/* 0 is just a place holder. */

	KEY_RESERVED,

	KEY_STOP,

	KEY_PLAYCD,

	KEY_RESERVED,

	KEY_PREVIOUSSONG,

	KEY_REWIND,

	KEY_FORWARD,

	KEY_NEXTSONG,

	KEY_RESERVED,

	KEY_RESERVED,

	KEY_RESERVED,

	KEY_PAUSE,

	KEY_VOLUMEUP,

	KEY_RESERVED,

	KEY_RESERVED,

	KEY_RESERVED,

	KEY_VOLUMEDOWN,

	KEY_RESERVED,

	KEY_UP,

	KEY_RESERVED,

	KEY_MUTE,

	KEY_LEFT,

	KEY_ENTER,

	KEY_RIGHT,

	KEY_RESERVED,

	KEY_RESERVED,

	KEY_DOWN,

	KEY_RESERVED,

	KEY_KPASTERISK,

	KEY_RESERVED,

	KEY_MENU

};



static struct usb_driver keyspan_driver;



/*

 * Debug routine that prints out what we've received from the remote.

 */

static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/

{

	char codes[4*RECV_SIZE];

	int i;



	for (i = 0; i < RECV_SIZE; i++) {

		snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]);

	}



	dev_info(&dev->udev->dev, "%s\n", codes);

}



/*

 * Routine that manages the bit_tester structure.  It makes sure that there are

 * at least bits_needed bits loaded into the tester.

 */

static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)

{

	if (dev->data.bits_left >= bits_needed)

		return(0);



	/*

	 * Somehow we've missed the last message. The message will be repeated

	 * though so it's not too big a deal

	 */

	if (dev->data.pos >= dev->data.len) {

		dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n",

			__FUNCTION__, dev->data.pos, dev->data.len);

		return(-1);

	}



	/* Load as much as we can into the tester. */

	while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&

	       (dev->data.pos < dev->data.len)) {

		dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);

		dev->data.bits_left += 8;

	}



	return(0);

}



/*

 * Routine that handles all the logic needed to parse out the message from the remote.

 */

static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs)

{

	int i;

	int found = 0;

	struct keyspan_message message;



	switch(remote->stage) {

	case 0:

		/*

		 * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.

		 * So the first byte that isn't a FF should be the start of a new message.

		 */

		for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);



		if (i < RECV_SIZE) {

			memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);

			remote->data.len = RECV_SIZE;

			remote->data.pos = 0;

			remote->data.tester = 0;

			remote->data.bits_left = 0;

			remote->stage = 1;

		}

		break;



	case 1:

		/*

		 * Stage 1 we should have 16 bytes and should be able to detect a

		 * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.

		 */

		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);

		remote->data.len += RECV_SIZE;



		found = 0;

		while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {

			for (i = 0; i < 8; ++i) {

				if (keyspan_load_tester(remote, 14) != 0) {

					remote->stage = 0;

					return;

				}



				if ((remote->data.tester & SYNC_MASK) == SYNC) {

					remote->data.tester = remote->data.tester >> 14;

					remote->data.bits_left -= 14;

					found = 1;

					break;

				} else {

					remote->data.tester = remote->data.tester >> 1;

					--remote->data.bits_left;

				}

			}

		}



		if (!found) {

			remote->stage = 0;

			remote->data.len = 0;

		} else {

			remote->stage = 2;

		}

		break;



	case 2:

		/*

		 * Stage 2 we should have 24 bytes which will be enough for a full

		 * message.  We need to parse out the system code, button code,

		 * toggle code, and stop.

		 */

		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);

		remote->data.len += RECV_SIZE;



		message.system = 0;

		for (i = 0; i < 9; i++) {

			keyspan_load_tester(remote, 6);



			if ((remote->data.tester & ZERO_MASK) == ZERO) {

				message.system = message.system << 1;

				remote->data.tester = remote->data.tester >> 5;

				remote->data.bits_left -= 5;

			} else if ((remote->data.tester & ONE_MASK) == ONE) {

				message.system = (message.system << 1) + 1;

				remote->data.tester = remote->data.tester >> 6;

				remote->data.bits_left -= 6;

			} else {

				err("%s - Unknown sequence found in system data.\n", __FUNCTION__);

				remote->stage = 0;

				return;

			}

		}



		message.button = 0;

		for (i = 0; i < 5; i++) {

			keyspan_load_tester(remote, 6);



			if ((remote->data.tester & ZERO_MASK) == ZERO) {

				message.button = message.button << 1;

				remote->data.tester = remote->data.tester >> 5;

				remote->data.bits_left -= 5;

			} else if ((remote->data.tester & ONE_MASK) == ONE) {

				message.button = (message.button << 1) + 1;

				remote->data.tester = remote->data.tester >> 6;

				remote->data.bits_left -= 6;

			} else {

				err("%s - Unknown sequence found in button data.\n", __FUNCTION__);

				remote->stage = 0;

				return;

			}

		}



		keyspan_load_tester(remote, 6);

		if ((remote->data.tester & ZERO_MASK) == ZERO) {

			message.toggle = 0;

			remote->data.tester = remote->data.tester >> 5;

			remote->data.bits_left -= 5;

		} else if ((remote->data.tester & ONE_MASK) == ONE) {

			message.toggle = 1;

			remote->data.tester = remote->data.tester >> 6;

			remote->data.bits_left -= 6;

		} else {

			err("%s - Error in message, invalid toggle.\n", __FUNCTION__);

		}



		keyspan_load_tester(remote, 5);

		if ((remote->data.tester & STOP_MASK) == STOP) {

			remote->data.tester = remote->data.tester >> 5;

			remote->data.bits_left -= 5;

		} else {

			err("Bad message recieved, no stop bit found.\n");

		}



		dev_dbg(&remote->udev,

			"%s found valid message: system: %d, button: %d, toggle: %d\n",

			__FUNCTION__, message.system, message.button, message.toggle);



		if (message.toggle != remote->toggle) {

			input_regs(&remote->input, regs);

			input_report_key(&remote->input, keyspan_key_table[message.button], 1);

			input_report_key(&remote->input, keyspan_key_table[message.button], 0);

			input_sync(&remote->input);

			remote->toggle = message.toggle;

		}



		remote->stage = 0;

		break;

	}

}



/*

 * Routine for sending all the initialization messages to the remote.

 */

static int keyspan_setup(struct usb_device* dev)

{

	int retval = 0;



	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),

				 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);

	if (retval) {

		dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",

			__FUNCTION__, retval);

		return(retval);

	}



	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),

				 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);

	if (retval) {

		dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",

			__FUNCTION__, retval);

		return(retval);

	}



	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),

				 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);

	if (retval) {

		dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",

			__FUNCTION__, retval);

		return(retval);

	}



	dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);

	return(retval);

}



/*

 * Routine used to handle a new message that has come in.

 */

static void keyspan_irq_recv(struct urb *urb, struct pt_regs *regs)

{

	struct usb_keyspan *dev = urb->context;

	int retval;



	/* Check our status in case we need to bail out early. */

	switch (urb->status) {

	case 0:

		break;



	/* Device went away so don't keep trying to read from it. */

	case -ECONNRESET:

	case -ENOENT:

	case -ESHUTDOWN:

		return;



	default:

		goto resubmit;

		break;

	}



	if (debug)

		keyspan_print(dev);



	keyspan_check_data(dev, regs);



resubmit:

	retval = usb_submit_urb(urb, GFP_ATOMIC);

	if (retval)

		err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);

}



static int keyspan_open(struct input_dev *dev)

{

	struct usb_keyspan *remote = dev->private;



	if (remote->open++)

		return 0;



	remote->irq_urb->dev = remote->udev;

	if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) {

		remote->open--;

		return -EIO;

	}



	return 0;

}



static void keyspan_close(struct input_dev *dev)

{

	struct usb_keyspan *remote = dev->private;



	if (!--remote->open)

		usb_kill_urb(remote->irq_urb);

}



/*

 * Routine that sets up the driver to handle a specific USB device detected on the bus.

 */

static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)

{

	int i;

	int retval = -ENOMEM;

	char path[64];

	char *buf;

	struct usb_keyspan *remote = NULL;

	struct usb_host_interface *iface_desc;

	struct usb_endpoint_descriptor *endpoint;

	struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));



	/* See if the offered device matches what we can accept */

	if ((udev->descriptor.idVendor != USB_KEYSPAN_VENDOR_ID) ||

	    (udev->descriptor.idProduct != USB_KEYSPAN_PRODUCT_UIA11) )

		return -ENODEV;



	/* allocate memory for our device state and initialize it */

	remote = kmalloc(sizeof(*remote), GFP_KERNEL);

	if (remote == NULL) {

		err("Out of memory\n");

		goto error;

	}

	memset(remote, 0x00, sizeof(*remote));



	remote->udev = udev;

	remote->interface = interface;

	remote->toggle = -1;	/* Set to -1 so we will always not match the toggle from the first remote message. */



	/* set up the endpoint information */

	/* use only the first in interrupt endpoint */

	iface_desc = interface->cur_altsetting;

	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {

		endpoint = &iface_desc->endpoint[i].desc;



		if (!remote->in_endpoint &&

		    (endpoint->bEndpointAddress & USB_DIR_IN) &&

		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {

			/* we found our interrupt in endpoint */

			remote->in_endpoint = endpoint;



			remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);

			if (!remote->in_buffer) {

				retval = -ENOMEM;

				goto error;

			}

		}

	}



	if (!remote->in_endpoint) {

		err("Could not find interrupt input endpoint.\n");

		retval = -ENODEV;

		goto error;

	}



	remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);

	if (!remote->irq_urb) {

		err("Failed to allocate urb.\n");

		retval = -ENOMEM;

		goto error;

	}



	retval = keyspan_setup(remote->udev);

	if (retval) {

		err("Failed to setup device.\n");

		retval = -ENODEV;

		goto error;

	}



	/*

	 * Setup the input system with the bits we are going to be reporting

	 */

	remote->input.evbit[0] = BIT(EV_KEY);		/* We will only report KEY events. */

	for (i = 0; i < 32; ++i) {

		if (keyspan_key_table[i] != KEY_RESERVED) {

			set_bit(keyspan_key_table[i], remote->input.keybit);

		}

	}



	remote->input.private = remote;

	remote->input.open = keyspan_open;

	remote->input.close = keyspan_close;



	usb_make_path(remote->udev, path, 64);

	sprintf(remote->phys, "%s/input0", path);



	remote->input.name = remote->name;

	remote->input.phys = remote->phys;

	remote->input.id.bustype = BUS_USB;

	remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor);

	remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct);

	remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice);



	if (!(buf = kmalloc(63, GFP_KERNEL))) {

		usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);

		kfree(remote);

		return -ENOMEM;

	}



	if (remote->udev->descriptor.iManufacturer &&

	    usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0)

		strcat(remote->name, buf);



	if (remote->udev->descriptor.iProduct &&

	    usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0)

		sprintf(remote->name, "%s %s", remote->name, buf);



	if (!strlen(remote->name))

		sprintf(remote->name, "USB Keyspan Remote %04x:%04x",

			remote->input.id.vendor, remote->input.id.product);



	kfree(buf);



	/*

	 * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()

	 */

	usb_fill_int_urb(remote->irq_urb,

			 remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress),

			 remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,

			 remote->in_endpoint->bInterval);

	remote->irq_urb->transfer_dma = remote->in_dma;

	remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;



	/* we can register the device now, as it is ready */

	input_register_device(&remote->input);



	/* save our data pointer in this interface device */

	usb_set_intfdata(interface, remote);



	/* let the user know what node this device is now attached to */

	info("connected: %s on %s", remote->name, path);

	return 0;



error:

	/*

	 * In case of error we need to clean up any allocated buffers

	 */

	if (remote->irq_urb)

		usb_free_urb(remote->irq_urb);



	if (remote->in_buffer)

		usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);



	if (remote)

		kfree(remote);



	return retval;

}



/*

 * Routine called when a device is disconnected from the USB.

 */

static void keyspan_disconnect(struct usb_interface *interface)

{

	struct usb_keyspan *remote;



	/* prevent keyspan_open() from racing keyspan_disconnect() */

	lock_kernel();



	remote = usb_get_intfdata(interface);

	usb_set_intfdata(interface, NULL);



	if (remote) {	/* We have a valid driver structure so clean up everything we allocated. */

		input_unregister_device(&remote->input);

		usb_kill_urb(remote->irq_urb);

		usb_free_urb(remote->irq_urb);

		usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma);

		kfree(remote);

	}



	unlock_kernel();



	info("USB Keyspan now disconnected");

}



/*

 * Standard driver set up sections

 */

static struct usb_driver keyspan_driver =

{

	.owner =	THIS_MODULE,

	.name =		"keyspan_remote",

	.probe =	keyspan_probe,

	.disconnect =	keyspan_disconnect,

	.id_table =	keyspan_table

};



static int __init usb_keyspan_init(void)

{

	int result;



	/* register this driver with the USB subsystem */

	result = usb_register(&keyspan_driver);

	if (result)

		err("usb_register failed. Error number %d\n", result);



	return result;

}



static void __exit usb_keyspan_exit(void)

{

	/* deregister this driver with the USB subsystem */

	usb_deregister(&keyspan_driver);

}



module_init(usb_keyspan_init);

module_exit(usb_keyspan_exit);



MODULE_DEVICE_TABLE(usb, keyspan_table);

MODULE_AUTHOR(DRIVER_AUTHOR);

MODULE_DESCRIPTION(DRIVER_DESC);

MODULE_LICENSE(DRIVER_LICENSE);