Loading CREDITS +2 −2 Original line number Diff line number Diff line Loading @@ -2380,8 +2380,8 @@ E: tmolina@cablespeed.com D: bug fixes, documentation, minor hackery N: James Morris E: jmorris@redhat.com W: http://www.intercode.com.au/jmorris/ E: jmorris@namei.org W: http://namei.org/ D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec, D: Crypto API, general networking, miscellaneous. S: PO Box 707 Loading Documentation/arm/Samsung-S3C24XX/USB-Host.txt 0 → 100644 +93 −0 Original line number Diff line number Diff line S3C24XX USB Host support ======================== Introduction ------------ This document details the S3C2410/S3C2440 in-built OHCI USB host support. Configuration ------------- Enable at least the following kernel options: menuconfig: Device Drivers ---> USB support ---> <*> Support for Host-side USB <*> OHCI HCD support .config: CONFIG_USB CONFIG_USB_OHCI_HCD Once these options are configured, the standard set of USB device drivers can be configured and used. Board Support ------------- The driver attaches to a platform device, which will need to be added by the board specific support file in linux/arch/arm/mach-s3c2410, such as mach-bast.c or mach-smdk2410.c The platform device's platform_data field is only needed if the board implements extra power control or over-current monitoring. The OHCI driver does not ensure the state of the S3C2410's MISCCTRL register, so if both ports are to be used for the host, then it is the board support file's responsibility to ensure that the second port is configured to be connected to the OHCI core. Platform Data ------------- See linux/include/asm-arm/arch-s3c2410/usb-control.h for the descriptions of the platform device data. An implementation can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c . The `struct s3c2410_hcd_info` contains a pair of functions that get called to enable over-current detection, and to control the port power status. The ports are numbered 0 and 1. power_control: Called to enable or disable the power on the port. enable_oc: Called to enable or disable the over-current monitoring. This should claim or release the resources being used to check the power condition on the port, such as an IRQ. report_oc: The OHCI driver fills this field in for the over-current code to call when there is a change to the over-current state on an port. The ports argument is a bitmask of 1 bit per port, with bit X being 1 for an over-current on port X. The function s3c2410_usb_report_oc() has been provided to ensure this is called correctly. port[x]: This is struct describes each port, 0 or 1. The platform driver should set the flags field of each port to S3C_HCDFLG_USED if the port is enabled. Document Author --------------- Ben Dooks, (c) 2005 Simtec Electronics Documentation/x86_64/boot-options.txt +5 −0 Original line number Diff line number Diff line Loading @@ -6,6 +6,11 @@ only the AMD64 specific ones are listed here. Machine check mce=off disable machine check mce=bootlog Enable logging of machine checks left over from booting. Disabled by default because some BIOS leave bogus ones. If your BIOS doesn't do that it's a good idea to enable though to make sure you log even machine check events that result in a reboot. nomce (for compatibility with i386): same as mce=off Loading MAINTAINERS +2 −2 Original line number Diff line number Diff line Loading @@ -1658,7 +1658,7 @@ M: kuznet@ms2.inr.ac.ru P: Pekka Savola (ipv6) M: pekkas@netcore.fi P: James Morris M: jmorris@redhat.com M: jmorris@namei.org P: Hideaki YOSHIFUJI M: yoshfuji@linux-ipv6.org P: Patrick McHardy Loading Loading @@ -2047,7 +2047,7 @@ SELINUX SECURITY MODULE P: Stephen Smalley M: sds@epoch.ncsc.mil P: James Morris M: jmorris@redhat.com M: jmorris@namei.org L: linux-kernel@vger.kernel.org (kernel issues) L: selinux@tycho.nsa.gov (general discussion) W: http://www.nsa.gov/selinux Loading Makefile +1 −1 Original line number Diff line number Diff line VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 13 EXTRAVERSION =-rc5 EXTRAVERSION =-rc6 NAME=Woozy Numbat # *DOCUMENTATION* Loading Loading
CREDITS +2 −2 Original line number Diff line number Diff line Loading @@ -2380,8 +2380,8 @@ E: tmolina@cablespeed.com D: bug fixes, documentation, minor hackery N: James Morris E: jmorris@redhat.com W: http://www.intercode.com.au/jmorris/ E: jmorris@namei.org W: http://namei.org/ D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec, D: Crypto API, general networking, miscellaneous. S: PO Box 707 Loading
Documentation/arm/Samsung-S3C24XX/USB-Host.txt 0 → 100644 +93 −0 Original line number Diff line number Diff line S3C24XX USB Host support ======================== Introduction ------------ This document details the S3C2410/S3C2440 in-built OHCI USB host support. Configuration ------------- Enable at least the following kernel options: menuconfig: Device Drivers ---> USB support ---> <*> Support for Host-side USB <*> OHCI HCD support .config: CONFIG_USB CONFIG_USB_OHCI_HCD Once these options are configured, the standard set of USB device drivers can be configured and used. Board Support ------------- The driver attaches to a platform device, which will need to be added by the board specific support file in linux/arch/arm/mach-s3c2410, such as mach-bast.c or mach-smdk2410.c The platform device's platform_data field is only needed if the board implements extra power control or over-current monitoring. The OHCI driver does not ensure the state of the S3C2410's MISCCTRL register, so if both ports are to be used for the host, then it is the board support file's responsibility to ensure that the second port is configured to be connected to the OHCI core. Platform Data ------------- See linux/include/asm-arm/arch-s3c2410/usb-control.h for the descriptions of the platform device data. An implementation can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c . The `struct s3c2410_hcd_info` contains a pair of functions that get called to enable over-current detection, and to control the port power status. The ports are numbered 0 and 1. power_control: Called to enable or disable the power on the port. enable_oc: Called to enable or disable the over-current monitoring. This should claim or release the resources being used to check the power condition on the port, such as an IRQ. report_oc: The OHCI driver fills this field in for the over-current code to call when there is a change to the over-current state on an port. The ports argument is a bitmask of 1 bit per port, with bit X being 1 for an over-current on port X. The function s3c2410_usb_report_oc() has been provided to ensure this is called correctly. port[x]: This is struct describes each port, 0 or 1. The platform driver should set the flags field of each port to S3C_HCDFLG_USED if the port is enabled. Document Author --------------- Ben Dooks, (c) 2005 Simtec Electronics
Documentation/x86_64/boot-options.txt +5 −0 Original line number Diff line number Diff line Loading @@ -6,6 +6,11 @@ only the AMD64 specific ones are listed here. Machine check mce=off disable machine check mce=bootlog Enable logging of machine checks left over from booting. Disabled by default because some BIOS leave bogus ones. If your BIOS doesn't do that it's a good idea to enable though to make sure you log even machine check events that result in a reboot. nomce (for compatibility with i386): same as mce=off Loading
MAINTAINERS +2 −2 Original line number Diff line number Diff line Loading @@ -1658,7 +1658,7 @@ M: kuznet@ms2.inr.ac.ru P: Pekka Savola (ipv6) M: pekkas@netcore.fi P: James Morris M: jmorris@redhat.com M: jmorris@namei.org P: Hideaki YOSHIFUJI M: yoshfuji@linux-ipv6.org P: Patrick McHardy Loading Loading @@ -2047,7 +2047,7 @@ SELINUX SECURITY MODULE P: Stephen Smalley M: sds@epoch.ncsc.mil P: James Morris M: jmorris@redhat.com M: jmorris@namei.org L: linux-kernel@vger.kernel.org (kernel issues) L: selinux@tycho.nsa.gov (general discussion) W: http://www.nsa.gov/selinux Loading
Makefile +1 −1 Original line number Diff line number Diff line VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 13 EXTRAVERSION =-rc5 EXTRAVERSION =-rc6 NAME=Woozy Numbat # *DOCUMENTATION* Loading
